Introduction OF Arduino Pro Mini
Atmega 328 BY ROBOMART Product Code: RM0940
INTRODUCTION
The Arduino Pro Mini is intended for advanced users who require flexibility, low-cost, and small size.
It comes with the minimum of components (no on-board USB or pin headers) to keep the cost down.
Be sure to provide the correct power and use components whose operating voltage matches that of the board.
The board can be powered through USB via the six-pin programming header, or from a regulated 5V (depending on the model) supply applied to the VCC pin or an unregulated supply on the RAW pin.
Pinout of Arduino Pro Mini
ATMEGA 328 Specifications 131 Powerful Instructions – Most Single Clock Cycle Execution -- Up to 20 MIPS Throughput at 20 MHz -- Two 8-bit Timer/Counters with Separate Prescaler and Compare Mode -- One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode -- Real Time Counter with Separate Oscillator -- Six PWM Channels -- 8-channel 10-bit ADC in TQFP and QFN/MLF package -- Programmable Watchdog Timer with Separate On-chip Oscillator -- On-chip Analog Comparator -- 23 Programmable I/O Lines
CONTACT US B5, C-Block, Above IOB Bank, Sec-31, Noida-201301(UP) India 0120-4317229 +91-8744000555 admin@robomart.com www.robomart.com