arduino pro mini
arduino pro mini board atmega328 The Arduino Pro Mini is intended for advanced users who require flexibility, low-cost, and small size. It comes with the minimum of components (no on-board USB or pin headers) to keep the cost down. Be sure to provide the correct power and use components whose operating voltage matches that of the board. The board comes without built-in USB circuitry, so an off-board USB-to-TTL serial convertor must be used to upload sketches. This can be a FTDI TTL-232R USB - TTL Level Serial Converter Cable for the 5V Arduino Mini Pro), or a FTDI TTL-232R-3V3 USB - TTL Level Serial Converter Cable. One quick way to connect these is by inserting a six-pin 0.1" male pin header into the end of the FTDI cable or breakout board, and pressing it against the six hole programming header on the Mini Pro.
arduino pro mini board
Arduino Pro Mini Front
Arduino Pro Mini Back
atmega 328 SpecificationS 131 Powerful Instructions – Most Single Clock Cycle Execution Up to 20 MIPS Throughput at 20 MHz Two 8-bit Timer/Counters with Separate Prescaler and Compare Mode One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode Real Time Counter with Separate Oscillator Six PWM Channels 8-channel 10-bit ADC in TQFP and QFN/MLF package Programmable Watchdog Timer with Separate On-chip Oscillator On-chip Analog Comparator 23 Programmable I/O Lines
reLated productS
Atmega-16/32 Robotics mini Development Board V 1.0
Atmega8 mini Robotics Development Board V1
URL: https://www.robomart.com/arduino-pro-mini-board-atmega328
contact uS b5, c bLock Sector 31, above indian overSeaS bank noida uttar pradeSh 201301 india mob. +91-8744000555 teL. +91-120- 4317229
Email Id admin@robomart.com Web. https://www.robomart.com
thank You