Protech catalog by Ivo Balchev

WWW.PROTECH.BE

WE CREATE YOUR PASSION

01-07cat2009.indd 1

20-01-2009 20:47:02

CESSNA 400 RTF EP semi-scale air plane

high power brushless motor included

01-07cat2009.indd 2

20-01-2009 20:47:12

Item Nr: T0440.35M1 35 MHz MODE 1 T0440.35M2 35 MHz MODE 2 T0440.41M1 41 MHz MODE 1 T0440.41M2 41 MHz MODE 2 T0440.35M1 UK 35 MHz MODE 1 T0440.35M2 UK 35 MHz MODE 2

ALL YOU NEED IN ONE PACKAGE!

Professional 4-channel FM radio control system with servo reverse function, charging socket and socket for flightsimulators

READY TO FLY ELECTRIC POWERED AIRPLANE Enjoy the fascination of model flying with this beautifully finished Cessna. The installed brushless driveset with Lipo is very powerful and allows this little Cessna to reach great heights effortlessly. The flying characteristics are mild and very forgiving just like on a high wing trainer so perfect for beginners or scale enthousiasts who just want to enjoy a quiet and gentle flight. All electronics are factory installed and adjusted and the model can be completely finished by the time the battery is charged.

12V DC Automatic Li-Po Battery Charger and 230V Power Supply (included)

KIT CONTENTS Styrofoam wing, fuselage and tailplane. Preinstalled servos (3), receiver, 18A speed controller and brushless motor. 3 cell LiPo battery and charger. 4 Channel transmitter with trainer socket. All necessary hardware and glue. Full colour decals and clear building instructions in English, Dutch, French and German. TECHNICAL SPECS • Wingspan: 960 mm • Length: 762 mm • Wing area: 15,3 dm2 • Weight: 430 g • Motor: brushless motor

5 Channel FM long range micro receiver (installed) 3x B160 micro servos (installed & adjusted)

18A Brushless electronic speed controller (installed)

FUNCTIONS • Rudder • Elevator • Ailerons • Motor

High Power Li-Po Batterypack 1200mAh - 11,1V (included)

REQUIRED FOR OPERATION • 8 x LR-6 size dry cells

01-07cat2009.indd 3

20-01-2009 20:47:17

EXTRA 330 RTF EP aerobatic air plane

high power brushless motor included

01-07cat2009.indd 4

20-01-2009 20:47:19

Item Nr: T0441.35M1 35 MHz MODE 1 T0441.35M2 35 MHz MODE 2 T0441.41M1 41 MHz MODE 1 T0441.41M2 41 MHz MODE 2 T0441.35M1 UK 35 MHz MODE 1 T0441.35M2 UK 35 MHz MODE 2

ALL YOU NEED IN ONE PACKAGE! Professional 4-channel FM radio control system with servo reverse function, charging socket and socket for flightsimulators

READY TO FLY ELECTRIC POWERED AEROBATIC PLANE The Extra 330 L is probably one of the most popular aerobatic trainer aircraft. This stunning styrofoam replica is exactly as thrilling to fly as its fullsize counterpart. Even the most extreme aerobatics are possible thanks to the Extra's light weight and rigid structure. And with the installed brushless motor, the vertical performance is stunning. The Extra 330 L requires minimal assembly and can be made ready to fly in under 1 hour, all necessary tools and hardware are included. The kit comes with a professional 4 channel radio with trainer socket for hobby grade flight simulators and a full range 5 channel receiver.

12V DC Automatic Li-Po Battery Charger and 230V Power Supply (included)

KIT CONTENTS Styrofoam wing, fuselage and tailplane. Preinstalled servos (4), receiver, 25A speed controller and brushless motor. 3 cell LiPo battery and charger. 4 Channel transmitter with trainer socket. All necessary hardware and glue. Full colour decals and clear building instructions in English, Dutch, French and German TECHNICAL SPECS • Wingspan: 940 mm • Length: 755 mm • Wing area: 14,6 dm2 • Weight: 510 g • Motor: brushless motor

5 Channel FM long range micro receiver (installed) 4x B160 micro servos (installed & adjusted) High Power Li-Po Batterypack 1200mAh - 11,1V (included)

FUNCTIONS • Rudder • Elevator • Ailerons • Motor REQUIRED FOR OPERATION • 8 x LR-6 size dry cells

25A Brushless electronic speed controller (installed)

01-07cat2009.indd 5

20-01-2009 20:47:24

AIRCOMBO Cessna + Helix x 3D

high power brushless motor included

TECHNICAL SPECIFICATIONS • Wingspan: 960 mm • Length: 762 mm • Wing area: 15,3 dm2 • Weight: 430 g • Motor: brushless motor

FUNCTIONS • Rudder • Elevator • Ailerons • Motor

TECHNICAL SPECIFICATIONS • Rotor Ø: 345mm • Weight: 230 g

FUNCTIONS • Left - Right • Forward - Backward • Climbing - Descending • Tail control

01-07cat2009.indd Sec1:6

20-01-2009 20:47:26

AIRCOMBO ALL YOU NEED IN ONE PACKAGE!

Item Nr: T0550.35M1 35 MHz MODE 1 T0550.35M2 35 MHz MODE 2 T0550.41M1 41 MHz MODE 1 T0550.41M2 41 MHz MODE 2 T0550.35M1 UK 35 MHz MODE 1 T0550.35M2 UK 35 MHz MODE 2 AIRCOMBO CESSNA + HELIXX 3D Do you want to learn to fly but can’t decide if you want to start with helicopters or airplanes? With the new AIRCOMBO you no longer have to choose: it has a complete airplane and a complete helicopter plus everything you will need to operate them. Transmitter, charger and batteries and even flight simulator software with PC interface are all included. This makes the AIRCOMBO the perfect starter kit for the beginning modeler. Even if you are an experienced modeler who wants to enjoy some fuss-free flying on a quiet summer evening the AIRCOMBO can be the solution you were looking for.

FMS Flightsimulator freeware Learn to fly airplanes & helicopters behind your screen (included)

Professional 4-channel FM radio control system with servo reverse function, charging socket and socket for flightsimulators

12V DC Li-Po balance charger + 230V Power Supply (included)

High Power Li-Po Batterypack 800mAh - 7,4V (included)

KIT CONTENTS • 100% ready to fly Cessna 400, including 5-channel FM receiver, Brushless motor, Brushless ESC, 4 servos • 100% ready to fly Helixx 3D, including 5-channel FM receiver, 3in1 gyro and 2 servos • 4-channel FM transmitter with servo reverse function • Automatic "Balance" Li-Po charger • 230V Powersupply • Li-Po batterypack 11,1V 1200mAh • Li-Po batterypack 7,4V 800mAh • USB adapter cable • FMS flightsimulator Freeware CD

USB adapter cable to connect the transmitter to your PC (included)

High Power Li-Po Batterypack 1200mAh - 11,1V (included)

REQUIRED FOR OPERATION • 8 x LR-6 size dry cells

01-07cat2009.indd Sec1:7

20-01-2009 20:47:31

The RTF SOLUTIONS series brings ARF models to the next level... Everything on these models is pre-assembled and pre-installed at the factory. Only little work needs to be done to get airborne. Most of the models can be completed in less then 3 hours. A true BUY & FLY model. The RTF SOLUTIONS models are equipped with a genuine CYCLON brushless motor, high quality servos, brushless speed controller and all are factory installed and adjusted.

Just add your radio gear (TX & RX), batterypack and get airborne...

Pre-installed high performance CYCLON brushless motor, spinner and appropriate propeller for excellent performance

08-39Cat2009(RTF).indd 8

Pre-installed high quality programmable "Brushless ESC" with Li-Po battery cut-off safety function

20-01-2009 20:53:07

Factory rudder panel, pre-glued hinges, installed control horn and pre-glued hinges

Factory finished elevator panel, pre-glued hinges, installed control horn. The elevator panel is marked with alignment lines for easy installation.

Assembled landing gear

08-39Cat2009(RTF).indd 9

Factory finished wing with pre-installed high quality aileron servos, pre-glued hinges, installed control horns and push-rods

Factory finished fuselage with pre-installed high quality rudder & elevator servos, installed and adjusted push-rods

20-01-2009 20:53:18

BEAVER Semi-scale EP air plane

08-39Cat2009(RTF).indd 10

20-01-2009 20:53:28

BEAVER Item Nr: T0431.RTF

READY TO FLY ELECTRIC POWERED SEMI-SCALE AIRCRAFT Semi-scale model of the famous post-ww2 de Havilland workhorse. The DHC-2 Beaver is widely used as a utility aircraft and often fitted with skis or floats. Due to its very high rate of climb the aircraft is also used for skydiving. Pre-installed high performance CYCLON PR 15 motor (KV 1445 / 3S) with 9X6 propeller and spinner RTF SOLUTIONS KIT CONTENTS • Ready built all balsa fuselage, tail and wing parts, pre-covered with Oracover® polyester film. • Assembled landing gear • Pre-installed CYCLON "Brushless motor" with spinner and propeller • Pre-installed servos and pushrods adjusted • Pre-installed "Brushless ESC" • Pre-Cut and mounted canopy • Multi language assembly manual

Pre-installed "Brushless" ESC 30A with 3A BEC for 2 - 3 Li-Po cells

TECHNICAL SPECIFICATIONS • Wingspan: 1020 mm • Length: 715 mm • Wing area: 17 dm2 • Weight: 910 g FUNCTIONS • Rudder • Elevator • Ailerons • Motor

Pre-installed high quality ball raced micro servos, 2.2 kg torque (3 pcs)

REQUIRED FOR OPERATION • Battery 3S1P LiPo 2170 mAh • 4 Ch radio & receiver

08-39Cat2009(RTF).indd 11

20-01-2009 20:53:55

EV-97 Semi-scale EP air plane

08-39Cat2009(RTF).indd 12

20-01-2009 20:54:01

EV-97 EUROSTAR Item Nr: T0416.RTF

Pre-installed high performance CYCLON PR 15 motor (KV 1445 / 3S) with 9X6 propeller and spinner

Ready to fly electric powered semi-scale aircraft EV 97 Eurostar, aka Sportstar, has been manufactured in the Czech Republic and is mostly used as a trainer aircraft in Europe. The wings have been designed with little dihedral, no taper and no washout other than that which comes from the large upturned wingtips which give the EV 97 its typical look. Protech has carefully reproduced these features in this beautiful scale model of the EV 97. RTF SOLUTIONS KIT CONTENTS • Ready built all balsa fuselage, tail and wing parts, pre-covered with Oracover® polyester film. • Assembled landing gear • Pre-installed CYCLON "Brushless motor" with spinner and propeller • Pre-installed servos and pushrods adjusted • Pre-installed "Brushless ESC" • Pre-Cut and mounted canopy • Multi language assembly manual

Pre-installed "Brushless" ESC 30A with 3A BEC for 2 - 3 Li-Po cells

Technical specifications • Wingspan: 960 mm • Length: 770 mm • Wing area: 16,3 dm2 • Weight: 600 g Functions • Rudder • Elevator • Ailerons • Motor

Pre-installed high quality ball raced micro servos, 2.2 kg torque (3 pcs)

Required for operation • Battery 3S1P LiPo 2170 mAh • 4 Ch radio & receiver

08-39Cat2009.indd 13

21-01-2009 16:02:13

JODEL ROBIN Semi-scale EP air plane

08-39Cat2009(RTF).indd 14

20-01-2009 20:54:21

Item Nr: T0452.RTF

Pre-installed high performance CYCLON PR 15 motor (KV 1445 / 3S) with 9X6 propeller and spinner

READY TO FLY ELECTRIC POWERED SEMI-SCALE AIRCRAFT The Robin R2160A is an all metal, low wing, aerobatic monoplane. It is powered by a 160hp Lycoming O320D engine. It is stressed to +6 -3g and has a MTOW of 900kg. PROTECH created a low-weight lovely looking ready-to-fly semi-scale model of the original that will please many model pilots.

Pre-installed "Brushless" ESC 30A with 3A BEC for 2 - 3 Li-Po cells

TECHNICAL SPECIFICATIONS • Wingspan: 1015 mm • Length: 810 mm • Wing area: 19,44 dm2 • Weight: 850 g FUNCTIONS • Rudder • Elevator • Ailerons • Motor

Pre-installed high quality ball raced micro servos, 2.2 kg torque (4 pcs)

REQUIRED FOR OPERATION • Battery 3S1P LiPo 2170 mAh • 4 Ch radio & receiver

08-39Cat2009(RTF).indd 15

20-01-2009 20:54:46

STAUDACHER Semi-scale EP air plane

08-39Cat2009(RTF).indd 16

20-01-2009 20:54:52

STAUDACHER Item Nr: T0418.RTF

Pre-installed high performance CYCLON PR 15 motor (KV 1445 / 3S) with 9X6 propeller and spinner

READY TO FLY ELECTRIC POWERED AEROBATIC AIRPLANE This top performing unlimited aerobatic aircraft, built by Mr. Jon Staudacher, is America’s answer to the German Extra and Russian Sukhoi. Since its first flight in 1990, it has won several medals and has been flown in the U.S. Unlimited Team to great success. This attractive model is built up from a complete one-piece upper deck, combined with laser cut wood parts. The Staudacher is highly aerobatic and the flight envelope is limitless.

Pre-installed "Brushless" ESC 30A with 3A BEC for 2 - 3 Li-Po cells

RTF SOLUTIONS KIT CONTENTS • Ready built all balsa fuselage, tail and wing parts, pre-covered with Oracover® polyester film. • Assembled landing gear • Pre-installed CYCLON "Brushless motor" with spinner and propeller • Pre-installed servos and pushrods adjusted • Pre-installed "Brushless ESC" • Pre-Cut and mounted canopy • Multi language assembly manual TECHNICAL SPECIFICATIONS • Wingspan: 1080 mm • Length: 930 mm • Wing area: 18,4 dm2 • Weight: 690 g FUNCTIONS • Rudder • Elevator • Ailerons • Motor

Pre-installed high quality ball raced micro servos, 2.2 kg torque (4 pcs)

REQUIRED FOR OPERATION • Battery 3S1P LiPo 2170 mAh • 4 Ch radio & receiver

08-39Cat2009(RTF).indd 17

20-01-2009 20:54:58

NINJA JET Jet Like EP air plane

08-39Cat2009(RTF).indd 18

20-01-2009 20:55:03

NINJA JET Item Nr: T0419.RTF

Pre-installed high performance CYCLON PR 15 motor (KV 1445 / 3S) with 8X6 propeller and spinner

READY TO FLY ELECTRIC POWERED JET-LIKE AIRPLANE With the popular Apollo brushless motors it has become possible to develop serious power…The Ninja Jet is engineered to harness this power and convert it into plenty of forward motion. The lift surface is sufficient to make approaches and landings non-critical while the airfoil will guarantee lots of speed. The futuristic looks add to the attractive nature of this purebred speedmonster and make it look like it’s already doing 100 km/h while it’s on the workbench.

Pre-installed "Brushless" ESC 30A with 3A BEC for 2 - 3 Li-Po cells

RTF SOLUTIONS KIT CONTENTS • Ready built all balsa fuselage, tail and wing parts, pre-covered with Oracover® polyester film. • Assembled landing gear • Pre-installed CYCLON "Brushless motor" with spinner and propeller • Pre-installed servos and pushrods adjusted • Pre-installed "Brushless ESC" • Pre-Cut and mounted canopy • Multi language assembly manual TECHNICAL SPECIFICATIONS • Wingspan: 910 mm • Length: 870 mm • Wing area: 16,4 dm2 • Weight: 1030 g FUNCTIONS • Rudder • Elevator • Ailerons • Motor

Pre-installed high quality ball raced micro servos, 2.2 kg torque (3 pcs)

REQUIRED FOR OPERATION • Battery 3S1P LiPo 2170 mAh • 4 Ch radio & receiver

08-39Cat2009(RTF).indd 19

20-01-2009 20:55:10

PITTS S12 Semi-scale EP biplane

08-39Cat2009(RTF).indd 20

20-01-2009 20:55:15

PITTS S12 Item Nr: T0456.RTF

Pre-installed high performance CYCLON PR 22 motor (KV 1310 / 3S) with 10X6 propeller and spinner

READY TO FLY ELECTRIC POWERED AEROBATIC AIRPLANE The Pitts S12 is a highly evolved Pitts Special that boasts a 380 horse power Russian radial engine providing one of the most exhilarating rides available in the world today. Custom designed for extreme aerobatics it is big, bright and noisy delivering a super steroids adventure. With a top speed of 385km/h this beast is not for the faint hearted! This model brings upper class aerobatics to your airfield! RTF SOLUTIONS KIT CONTENTS • Ready built all balsa fuselage, tail and wing parts, pre-covered with Oracover® polyester film. • Assembled landing gear • Pre-installed CYCLON "Brushless motor" with spinner and propeller • Pre-installed servos and pushrods adjusted • Pre-installed "Brushless ESC" • Pre-Cut and mounted canopy • Multi language assembly manual

Pre-installed "Brushless" ESC 40A with 3A BEC for 2 - 3 Li-Po cells

TECHNICAL SPECIFICATIONS • Wingspan: 900 mm • Length: 840 mm • Wing area: 17,78 dm2 • Weight: 1080 g FUNCTIONS • Rudder • Elevator • Ailerons • Motor

Pre-installed high quality ball raced micro servos, 2.2 kg torque (4 pcs)

REQUIRED FOR OPERATION • Battery 3S1P LiPo 2500 mAh • 4 Ch radio & receiver

08-39Cat2009(RTF).indd 21

20-01-2009 20:55:20

BUCKER JUNGMANN Semi-scale EP biplane

08-39Cat2009(RTF).indd 22

20-01-2009 20:55:24

BUCKER JUNGMANN Item Nr: T0458.RTF

Pre-installed high performance CYCLON PR 22 motor (KV 1310 / 3S) with 10X6 propeller and spinner

READY TO FLY ELECTRIC POWERED AEROBATIC AIRPLANE The BU-131 Jungmann, was originally a primary trainer for the Luftwaffe. An elegant, light machine, it weighed only 725 kg gross with lots of wing area, so it performed admirably on the 105 hp it was born with. It was such a good little trainer that Czechoslovakia, Switzerland and Spain all built the airplane under license, the Spanish building them as late as the mid Sixties. The model combines unique design with top aerobatics.

Pre-installed "Brushless" ESC 40A with 3A BEC for 2 - 3 Li-Po cells

RTF SOLUTIONS KIT CONTENTS • Ready built all balsa fuselage, tail and wing parts, pre-covered with Oracover® polyester film. • Assembled landing gear • Pre-installed CYCLON "Brushless motor" with spinner and propeller • Pre-installed servos and pushrods adjusted • Pre-installed "Brushless ESC" • Pre-Cut and mounted canopy • Multi language assembly manual TECHNICAL SPECIFICATIONS • Wingspan: 950 mm • Length: 820 mm • Wing area: 16,2 dm2 • Weight: 990 g FUNCTIONS • Rudder • Elevator • Ailerons • Motor

Pre-installed high quality ball raced micro servos, 2.2 kg torque (4 pcs)

REQUIRED FOR OPERATION • Battery 3S1P LiPo 2170 mAh • 4 Ch radio & receiver

08-39Cat2009(RTF).indd 23

20-01-2009 20:55:30

CESSNA 182 Semi-scale EP air plane

08-39Cat2009(RTF).indd 24

20-01-2009 20:55:34

CESSNA 182 Item Nr: T0457.RTF

Pre-installed high performance CYCLON PR 22 motor (KV 1310 / 3S) with 10X6 propeller and spinner

READY TO FLY ELECTRIC POWERED AEROBATIC AIRPLANE The Cessna 182, marketed under the name Skylane, is a four-seat (with the option of an additional two child seats, installed in the baggage area), high performance, singleengine, light airplane. Introduced in 1956, the 182 has been produced in a number of variants, including a version with retractable landing gear, and is the second most popular Cessna model, after the 172.

Pre-installed "Brushless" ESC 40A with 3A BEC for 2 - 3 Li-Po cells

TECHNICAL SPECIFICATIONS • Wingspan: 1120 mm • Length: 850 mm • Wing area: 16,7 dm2 • Weight: 940 g FUNCTIONS • Rudder • Elevator • Ailerons • Motor

Pre-installed high quality ball raced micro servos, 2.2 kg torque (4 pcs)

REQUIRED FOR OPERATION • Battery 3S1P LiPo 2500 mAh • 4 Ch radio & receiver

08-39Cat2009(RTF).indd 25

20-01-2009 20:55:43

KATANA S15 Precision aerobatic EP air plane

08-39Cat2009(RTF).indd 26

20-01-2009 20:55:47

KATANA S15 Item Nr: T0455.RTF

READY TO FLY ELECTRIC POWERED AEROBATIC AIRPLANE The perfect combination between performance and good looks! The symmetrical airfoil and extra root area provides excellent 3D aerobatic performance. Snapping roll and straight knife edge performance out of the box! Pre-installed high performance CYCLON PR 22 motor (KV 1310 / 3S) with 10X6 propeller and spinner RTF SOLUTIONS KIT CONTENTS • Ready built all balsa fuselage, tail and wing parts, pre-covered with Oracover® polyester film. • Assembled landing gear • Pre-installed CYCLON "Brushless motor" with spinner and propeller • Pre-installed servos and pushrods adjusted • Pre-installed "Brushless ESC" • Pre-Cut and mounted canopy • Multi language assembly manual

Pre-installed "Brushless" ESC 40A with 3A BEC for 2 - 3 Li-Po cells

TECHNICAL SPECIFICATIONS • Wingspan: 1000 mm • Length: 1000 mm • Wing area: 23,4 dm2 • Weight: 990 g FUNCTIONS • Rudder • Elevator • Ailerons • Motor

P Pre-installed high quality ball raced micro servos, 2.2 kg torque (4 pcs) m

REQUIRED FOR OPERATION • Battery 3S1P LiPo 2500 mAh • 4 Ch radio & receiver

08-39Cat2009(RTF).indd 27

20-01-2009 20:56:03

ULTIMATE Precision aerobatic EP biplane

08-39Cat2009(RTF).indd 28

20-01-2009 20:56:09

ULTIMATE Item Nr: T0427.RTF

Pre-installed high performance CYCLON PR 22 motor (KV 1310 / 3S) with 10X6 propeller and spinner

READY TO FLY ELECTRIC POWERED AEROBATIC AIRPLANE Ultimate fun! The first products of the Ultimate Aircraft Company were designed to improve the looks and performance of the Pitts Special. After they had produced new wings, canopy, fuselages, and wheel pants for the Pitts, it was a natural step to produce their own airplane. Soon, a legend was born.

Pre-installed "Brushless" ESC 40A with 3A BEC for 2 - 3 Li-Po cells

TECHNICAL SPECIFICATIONS • Wingspan: 900 mm • Length: 965 mm • Wing area: 17,5 dm2 • Weight: 1080 g FUNCTIONS • Rudder • Elevator • Ailerons • Motor

Pre-installed high quality ball raced micro servos, 2.2 kg torque (4 pcs)

REQUIRED FOR OPERATION • Battery 3S1P LiPo 2500 mAh • 4 Ch radio & receiver

08-39Cat2009(RTF).indd 29

20-01-2009 20:56:33

TOJEIRO EP F3A style EP air plane

08-39Cat2009(RTF).indd 30

20-01-2009 20:56:38

TOJEIRO EP Item Nr: T0428.RTF Also available as KIT: T0428

Pre-installed high performance CYCLON PR 22 motor (KV 1310 / 3S) with 10X6 propeller and spinner

READY TO FLY ELECTRIC POWERED AEROBATIC AIRPLANE The model is built to the highest demands of todays F3A competiton. The fully symmetrical airfoil is modified and improved to suit the extremely difficult patterns. The fuselage has a large surface to perform better knife-edge manoeuvres. The overall aerodynamic shape of the model produces the necessary drag to slow down in vertical downlines. The torsion free wooden fuselage guarantees extreme precision in all flying positions.

Pre-installed "Brushless" ESC 40A with 3A BEC for 2 - 3 Li-Po cells

RTF SOLUTIONS KIT CONTENTS • Ready built all balsa fuselage, tail and wing parts, pre-covered with Oracover® polyester film. • Assembled landing gear • Pre-installed CYCLON "Brushless motor" with spinner and propeller • Pre-installed servos and pushrods adjusted • Pre-installed "Brushless ESC" • Pre-Cut and mounted canopy • Multi language assembly manual TECHNICAL SPECIFICATIONS • Wingspan: 1100 mm • Length: 1200 mm • Wing area: 24,7 dm2 • Weight: 1250 g FUNCTIONS • Rudder • Elevator • Ailerons • Motor

Pre-installed high quality ball raced micro servos, 2.2 kg torque (4 pcs)

REQUIRED FOR OPERATION • Battery 3S1P LiPo 2500 mAh • 4 Ch radio & receiver

08-39Cat2009(RTF).indd 31

20-01-2009 20:56:46

COLIBRI-E EP powered trainer

08-39Cat2009(RTF).indd 32

20-01-2009 20:56:51

COLIBRI-E Item Nr: T0424.RTF

READY TO FLY ELECTRIC POWERED TRAINER AIRPLANE The COLIBRI ARF has a very stable character, first flights will go as planned. A well thought out construction gives the Colibri enough strength to withstand the beginners abuse without adding extra weight. Taking off and landing in high grass or on a rough surface won’t pose a single problem thanks to the high, rugged landing gear.

Pre-installed high performance CYCLON PR 22 motor (KV 1310 / 3S) with 10X6 propeller and spinner

Pre-installed "Brushless" ESC 40A with 3A BEC for 2 - 3 Li-Po cells

TECHNICAL SPECIFICATIONS • Wingspan: 1400 mm • Length: 1030 mm • Wing area: 30,8 dm2 • Weight: 1420 g FUNCTIONS • Rudder • Elevator • Ailerons • Motor

Pre-installed high quality ball raced std servos, 3.5 kg torque (3 pcs)

REQUIRED FOR OPERATION • Battery 3S1P LiPo 3300 mAh • 4 Ch radio & receiver

08-39Cat2009(RTF).indd 33

20-01-2009 20:57:01

EXTRA 260 Precision aerobatic EP air plane

08-39Cat2009(RTF).indd 34

20-01-2009 20:57:07

EXTRA 260 Item Nr: T0453.RTF

READY TO FLY ELECTRIC POWERED AEROBATIC AIRPLANE The Extra 260 is a one-of-a-kind aircraft created by Walter Extra, a German aerobatic competitor and one of the world’s premier aerobatic aircraft designers and builders. This hand-built aircraft is recognized for its beauty, high performance, and maneuverability. The Extra 260 is a successful blend of traditional and high-technology construction.

Pre-installed high performance CYCLON PR 42 motor (KV 880 / 4S) with 13X6 propeller and spinner

Pre-installed "Brushless" ESC 50A with 3.5A switching BEC for 2 - 6 Li-Po cells

TECHNICAL SPECIFICATIONS • Wingspan: 1320 mm • Length: 1150 mm • Wing area: 34 dm2 • Weight: 2120g FUNCTIONS • Rudder • Elevator • Ailerons • Motor

Pre-installed high quality ball raced std servos, 3.5 kg torque (4 pcs)

REQUIRED FOR OPERATION • Battery 4S1P LiPo 3300 mAh • 4 Ch radio & receiver

08-39Cat2009(RTF).indd 35

20-01-2009 20:57:25

KATANA S40 Precision aerobatic EP air plane

08-39Cat2009(RTF).indd 36

20-01-2009 20:57:33

Item Nr: T0454.RTF

READY TO FLY ELECTRIC POWERED AEROBATIC AIRPLANE The perfect combination between performance and good looks! The symmetrical airfoil and extra root area provides excellent 3D aerobatic performance. Snapping roll and straight knife edge performance out of the box! Pre-installed high performance CYCLON PR 42 motor (KV 880 / 4S) with 13X6 propeller and spinner RTF SOLUTIONS KIT CONTENTS • Ready built all balsa fuselage, tail and wing parts, pre-covered with Oracover® polyester film. • Assembled landing gear • Pre-installed CYCLON "Brushless motor" with spinner and propeller • Pre-installed servos and pushrods adjusted • Pre-installed "Brushless ESC" • Pre-Cut and mounted canopy • Multi language assembly manual

Pre-installed "Brushless" ESC 50A with 3.5A switching BEC for 2 - 6 Li-Po cells

TECHNICAL SPECIFICATIONS • Wingspan: 1350 mm • Length: 1350 mm • Wing area: 42,0 dm2 • Weight: 2140 g FUNCTIONS • Rudder • Elevator • Ailerons • Motor

Pre-installed high quality ball raced std servos, 3.5 kg torque (4 pcs)

REQUIRED FOR OPERATION • Battery 4S1P LiPo 3300 mAh • 4 Ch radio & receiver

08-39Cat2009(RTF).indd 37

20-01-2009 20:57:40

BUCKER JUNGMANN Semi-scale EP biplane

08-39Cat2009(RTF).indd 38

20-01-2009 20:57:46

BUCKER JUNGMANN

Item Nr: T0451.RTF READY TO FLY ELECTRIC POWERED AEROBATIC AIRPLANE The Bucker Jungmann, was originally a primary trainer for the Luftwaffe. An elegant, light machine, it weighed only 725 kg gross with lots of wing area, so it performed admirably on the 105 hp it was born with. It was such a good little trainer that Czechoslovakia, Switzerland and Spain all built the airplane under license, the Spanish building them as late as the mid Sixties. The model combines unique design with top aerobatics.

Pre-installed high performance CYCLON PR 42 motor (KV 880 / 4S) with 13X6 propeller and spinner

Pre-installed "Brushless" ESC 50A with 3.5A switching BEC for 2 - 6 Li-Po cells

TECHNICAL SPECIFICATIONS • Wingspan: 1400 mm • Length: 1200 mm • Wing area: 70,0 dm2 • Weight: 1980 g FUNCTIONS • Rudder • Elevator • Ailerons • Motor

Pre-installed high quality ball raced std servos, 3.5 kg torque (4 pcs)

REQUIRED FOR OPERATION • Battery 4S1P LiPo 3300 mAh • 4 Ch radio & receiver

08-39Cat2009(RTF).indd 39

20-01-2009 20:57:53

SKYSTAR II IC powered high wing trainer

40-43Cat2009.indd 40

20-01-2009 21:01:11

SKYSTAR II Item Nr: T0352 Almost ready to fly IC powered trainer The Skystar RTF is an all balsa & ply almost ready to fly trainer. Its lightweight but extremely strong construction makes this model perfect for the novice in R/C modelflying. The wingspan of 1650mm and the large wing area gives this model excellent stability. The model is covered in a very attractive colour scheme for excellent orientation in the sky. The strong tricycle landing gear will withstand the hardest landings. Kit content Ready built all balsa & ply fuselage, wing and panels, all parts are pre-covered in high quality polyester covering film, wheels, fuel tank, pre-bent landing gear, all necessary hardware, clear assembly instructions in English, German, Dutch and French. Technical specifications • Wingspan: 1650 mm • Length: 1260 mm • Wing area: 48 dm2 • Weight: 2500 g • Motor: 2C .40-.46 IC engine 4C .52 IC engine Functions • Rudder • Elevator • Ailerons • Motor Required for operation • 4-ch radio with 4 std size servos • 2C .40 size IC engine • Glowstart set #T0102.4 • 5% plane fuel

THE BEST WAY TO GET STARTED WITH IC POWERED AIRPLANES

40-43Cat2009.indd 41

21-01-2009 16:09:18

TOJEIRO 50 IC powered F3A precision aerobatic air plane

40-43Cat2009.indd 42

20-01-2009 23:07:50

TOJEIRO 50 Item Nr: T0405

Technical specifications • Wingspan: 1325 mm • Length: 1400 mm • Wing area: 38,5 dm2 • Weight: 2,2 kg • Engine: 2C .40-.46 size 4C .52 size IC engine

Functions • Rudder • Elevator • Ailerons • Motor

ARTF COMPETITION AEROBATIC F3A AIRCRAFT If you want the best: TOJEIRO. The TOJEIRO is designed by 3 members of the Belgium F3A World Championship team. The model is built to the highest demands of todays F3A competiton. The fully symmetrical airfoil is modified and improved to suit the extremely difficult patterns. The fuselage has a large surface to perform better knife-edge manoeuvres. The overall aerodynamic shape of the model produces the necessary drag to slow down in vertical downlines. The torsion free wooden fuselage guarantees extreme precision in all flying positions. We experienced that the overall weight is extremely important to achieve a top performing model with a constant speed ability. At PROTECH we are convinced that it is possible to produce a wooden F3A model that will outperform all composite construction models on weight, stiffness and precision.

Required for operation • 4-ch programmable radio • 5x High quality servos (min. 4kg) • Aircraft engine 2C .46 size • Glowstart set #T0102.4 • Airplane fuel 20%

KIT CONTENT Ready built balsa and plywood fuselage and tail, balsa sheeted lightweight styrofoam wing panels*, pre-covered with Oracover® polyester film. Pre-painted fibreglass motor cowling, pre-painted fibreglass wheel pants, fibreglass landing gear, wheels, fuel tank, engine mount, accessories and clear building instructions in English, German, French and Dutch. FUNCTIONS • Rudder • Elevator • Ailerons • Motor

40-43Cat2009.indd 43

20-01-2009 23:09:27

HELIXX

LONG RANGER Item Nr: T0512.35M1 35 MHz MODE 1 T0512.35M2 35 MHz MODE 2 T0512.41M1 41 MHz MODE 1 T0512.41M2 41 MHz MODE 2 T0512.35M1 UK 35 MHz MODE 1 T0512.35M2 UK 35 MHz MODE 2

Professional 4-channel FM radio control system with servo reverse function, charging socket and socket for flightsimulators

High Power 12V DC Automatic Li-Po Li-Po Batterypack Battery Charger and 800mAh - 7,4V 230V Power Supply

44-57Cat2009.indd 44

20-01-2009 21:17:08

HELIXX 3D Item Nr: T0511.35M1 35 MHz MODE 1 T0511.35M2 35 MHz MODE 2 T0511.41M1 41 MHz MODE 1 T0511.41M2 41 MHz MODE 2 T0511.35M1 UK 35 MHz MODE 1 T0511.35M2 UK 35 MHz MODE 2

Professional 4-channel FM radio control system with servo reverse function, charging socket and socket for flightsimulators

12V DC Automatic Li-Po Battery Charger and High Power 230V Power Supply Li-Po Batterypack 800mAh - 7,4V

44-57Cat2009.indd 45

20-01-2009 21:17:15

ZOOM 425 SERIES

ZOOM 425 ARF #T0520

ZOOM 425 RTF #T0520.RTF

FEATURES

• 90% ASSEMBLED AIRFRAME • BRUSHLESS MOTOR (installed) • 30A BRUSHLESS ESC (installed)

• • • • •

REQUIRED FOR OPERATION

• 6 CH TRANSMITTER with CCPM mixing function

90% ASSEMBLED AIRFRAME BRUSHLESS MOTOR (installed) 30A BRUSHLESS ESC (installed) 4x HIGH PRECISION DIGITAL SERVOS (installed) HEADING HOLD GYRO (installed)

T0502.350 (35MHz) T0502.400 (40-41MHz) ELECTRONICS PACK for ZOOM 425. The pack includes: 4x B205 micro servos, NT-410 Heading Lock gyro and a Micro 6 FM receiver

PRO.306-35 (35MHz) PRO.306-40 (40-41MHz) 6-Channel micro receiver with fail-safe function

EVO18003S1P Li-Po batterypack 11,1V 3 cells 1800mAh

44-57Cat2009.indd 46

20-01-2009 21:17:18

ELECTRIC

ZOOM 450 SERIES

ZOOM 450 EP #T0502

ZOOM 450 EP ARF #T0502.ARF

FEATURES

• 90% ASSEMBLED AIRFRAME

• 90% ASSEMBLED AIRFRAME • BRUSHLESS MOTOR (installed) • 40A BRUSHLESS ESC (installed)

REQUIRED FOR OPERATION T0502.350 (35MHz) T0502.400 (40-41MHz) ELECTRONICS PACK

• 90% ASSEMBLED AIRFRAME • BRUSHLESS MOTOR (installed) • 40A BRUSHLESS ESC (installed) • 4x DIGITAL SERVOS (installed) • HEADING HOLD GYRO REQUIRED FOR OPERATION PRO.306-35 PRO.306-40 6-Channel micro receiver with fail-safe function

T0502.500

EVO25-2170-3S Li-Po batterypack 11,1V 3 cells 2170mAh

POWER SET : brushless motor, 30A ESC, FLIGHTPOWER 2170mAh 11,1V Li-Po batterypack

IC POWERED

ZOOM 450 EP RTF #T0502.RTF

ZOOM 450 IC #T0503

ZOOM 450 IC RTF #T0503.RTF

FEATURES

• 90% ASSEMBLED AIRFRAME • SX-12 HELI ENGINE (included)

• • • •

REQUIRED FOR OPERATION T0503.350 (35MHz) T0503.400 (40-41MHz) ELECTRONICS PACK

REQUIRED FOR OPERATION PRO.306-35 PRO.306-40 6-Channel micro receiver with fail-safe function

90% ASSEMBLED AIRFRAME SX-12 HELI ENGINE (included) 5x HIGH PRECISION SERVOS (installed) HEADING HOLD GYRO

EVO25-2170-3S Li-Po batterypack 11,1V 3 cells 2170mAh

••• 6 CH TRANSMITTER with CCPM mixing is required for all ZOOM 450 All ZOOM 450 IC models require starting equipment •••

44-57Cat2009.indd 47

20-01-2009 21:17:26

ZOOM 425 EP powered 3D helicop ter

P E O R C 3D MI OPTERS HELIC T TO SE EL V E L A NEW 48

44-57Cat2009.indd 48

20-01-2009 21:17:42

ZOOM 425 Item Nr: T0520 ALMOST READY TO FLY ELECTRIC MICRO HELICOPTER The Zoom 425 is the (r)evolution of the legendary Zoom 400: It now has al of his strengths and none of its weaknesses. The chassis is stronger because of its G10 structure, the tail system totally reliable thanks to the belt driven tail and the control system up to date with the 120° CCPM system. The Zoom 425 also features ball bearings on every moving part, ultra tough landing gear, rear mounted tail servo and brushless motor and speed controller as standard. Time to take this micro helicopter seriously... The ZOOM 425 EP is supplied 90% assembled. Brushless motor and ESC included

BRUSHLESS M OTOR + 30A ESC INCLU DED

• Lightweight G10 chassis • Fully ballraced • 120° CCPM • Belt driven tail • Constant driven tail • Heavy duty center hub • Ball raced see-saw • Alloy motor mount

T0502.350 (35MHz) T0502.400 (40-41MHz) ELECTRONICS PACK for ZOOM 450. The pack includes: 4x B205 precision high torque micro servos, NT-410 Heading Lock gyro and a high quality full range Micro 6 FM receiver

KIT CONTENTS • 90% assembled airframe • Brushless outrunner motor • Brushless ESC 30A • Wooden main rotor blades • Canopy • Multi-coloured decalsheet • English, Dutch, German and French instruction manual TECHNICAL SPECIFICATIONS • Rotor Ø: 710 mm • Weight: 650 g • Motor: brushless motor • Batteries: 3 cells Li-Po (11,1V) FUNCTIONS • Pitch axis • Roll • Nick • Tail rotor • Motorspeed REQUIRED FOR OPERATION • 6-Ch computer radio w/ ccpm mix • Electronics pack 35 MHz #T0502.350 • Electronics pack 40-41 MHz #T0502.400 • Li-Po batterypack 11,1V 3 cells 1800mAh

44-57Cat2009.indd 49

20-01-2009 21:17:48

ZOOM 450 EP EP powered 3D helicop ter

be o t g d n i e d n lea g i e s n i h De ass ac l m c a ro c i m 3D

44-57Cat2009.indd 50

20-01-2009 21:18:07

ZOOM 450 EP Item Nr: T0502

• Lightweight G10 chassis • Fully ballraced • 120° CCPM • Belt driven tail

• Constant driven tail • Alloy center hub • Alloy ball raced see-saw • Alloy motor mount

T0502.500 A special POWER SET is available to provide the ZOOM 450 with ballistic power. The set includes: 350W outrunner brushless motor, 30A ESC and a FLIGHTPOWER 2150mAh 11,1V Li-Po batterypack

ALMOST READY TO FLY ELECTRIC MICRO HELICOPTER When you buy a 3D micro helicopter, you want one that doesn’t need a whole lot of upgrades. You want a 3D micro helicopter that performs straight out of the box, even for the most demanding extreme pilots. The ZOOM 450 bundles all the popular features in one lightweight package. The frame is built up from rigid G10 frames and offers ample room for battery and radio components. Tail power is transferred by belt for low maintenance and improved efficiency. Control inputs from the 120° CCPM control system are translated to the 350mm blades thanks to the standard metal headblock. The ZOOM 450 EP is supplied 90% assembled. Electronics and Power Set are not included. KIT CONTENTS • 90% assembled airframe • Wooden main rotor blades • Blowmoulded canopy • Multi-coloured decalsheet • English, Dutch, German and French instruction manual TECHNICAL SPECIFICATIONS • Rotor Ø: 770-810mm • Weight: 750 g • Motor: brushless motor • Batteries: 3 cells Li-Po (11,1V) FUNCTIONS • Pitch axis • Roll • Nick • Tail rotor • Motorspeed REQUIRED FOR OPERATION • 6-Ch computer radio w/ ccpm mix • Electronics pack 35 MHz #T0502.350 • Electronics pack 40-41 MHz #T0502.400 • Power set #T0502.500

44-57Cat2009.indd 51

20-01-2009 21:18:15

ZOOM 450 IC IC powered 3D helicop ter

3D t irs ed f the poweropter ic helic ro c i m 52

44-57Cat2009.indd 52

20-01-2009 21:18:34

ZOOM 450 IC Item Nr: T0503 ALMOST READY TO FLY IC POWERED MICRO HELICOPTER This is what you get when you give a micro helicopter a nitro boost: The Zoom 450 IC. It has all the nice features of the Zoom 450 but is equipped with a SX-12 engine which gives you the same nitro rush associated with bigger helicopters. The Zoom 450 IC makes it possible to enjoy the sound and feel of a 3D nitro helicopter in your own backyard. KIT CONTENT • 90% assembled airframe • Wooden main rotor blades • Pre-cut blowmoulded canopy • SX-12 engine w/ muffler • Multi-coloured decalsheet • English, Dutch, German and French instruction manual

• Lightweight G10 chassis • Fully ballraced • 120° CCPM • Belt driven tail • Constant driven tail • Alloy center hub • Alloy ball raced see-saw • SX-12 heli engine

TECHNICAL SPECIFICATIONS • Rotor Ø: 770-810 mm • Weight: 900 g • Motor: SX-12 IC engine

T0503.350 (35MHz) T0503.400 (40-41MHz) ELECTRONICS PACK for ZOOM 450 IC. The pack includes: 5x B205 precision high torque micro servos, NT-410 Heading Lock gyro and a high quality full range Micro 6 FM receiver

FUNCTIONS • Pitch axis • Roll • Nick • Tail rotor • Motorspeed REQUIRED FOR OPERATION • 6-Ch computer radio w/ ccpm mix • Electronics pack 35 MHz #T0502.350 • Electronics pack 40-41 MHz #T0502.400 • Protech Daytona 16% nitro fuel • 4,8V RX battery pack • Hex starter shaft #T0184 • Starter #T0141

SX-12 heli engine included

44-57Cat2009.indd 53

20-01-2009 21:18:41

OPTION PARTS FOR ZOOM 425 & 450 SERIES

T0502.233 T0502.234 T0502.235 T0502.236 T0502.237

Pinion gear 12T, 2 pcs Pinion gear 13T, 2 pcs Pinion gear 14T, 2 pcs Pinion gear 15T, 2 pcs Pinion gear 16T, 2 pcs

T0502.239 One piece aluminium motor mount, fits Zoom 450 EP

T0502.082 Carbon fibre main rotor blades 350mm Fits Zoom 450 EP & IC

T0520.201 Carbon fibre main rotor blades 315mm Fits Zoom 425 EP

T0502.083 Carbon fibre tail boom Fits Zoom 450 EP & IC

T0520.200 Carbon fibre tail boom Fits Zoom 425 EP

T0502.204 Carbon fibre tail fin set Fits Zoom 450 EP & IC

T0520.204 Carbon fibre tail fin set Fits Zoom 425 EP

T502.205 Carbon fibre lower frame set Fits Zoom 450 EP

T0502.206 Carbon fibre upper frame set Fits Zoom 450 EP

T0502.209 Carbon fibre chassis reinforcement Fits Zoom 450 EP

T0503.205 Carbon fibre lower frame set Fits Zoom 450 IC

T0503.206 Carbon fibre upper frame set Fits Zoom 450 IC

T0520.205 Carbon fibre lower frame set Fits Zoom 425 EP

T0520.206 Carbon fibre upper frame set Fits Zoom 425 EP

T0502.210 Aluminium CNC machined rotor grip set Fits Zoom 425 EP - 450 EP - 450 IC

T0502.211 Aluminium CNC machined flybar control system. Fits Zoom 450 EP - 450 IC

44-57Cat2009.indd 54

20-01-2009 21:18:47

T0502.212 Aluminium CNC machined see-saw set Fits Zoom 425 EP - 450 EP - 450 IC

up to .60 size

T0502.213 Aluminium CNC machined wash-out base set. Fits Zoom 425 EP - 450 EP - 450 IC

T0502.214 Aluminium CNC machined wash-out base arm set. Fits Zoom 425 EP - 450 EP - 450 IC

T0502.215 Aluminium CNC machined linkage arm set. Fits Zoom 425 EP - 450 IC

T0502.216 Aluminium CNC machined swashplate. Fits Zoom 425 EP - 450 EP - 450 IC

up to .90 size

T0502.217 Aluminium CNC machined tail bearing mount. Fits Zoom 450 IC

T0502.218 Aluminium CNC machined tail boom mount set. Fits Zoom 450 IC

T0502.219 Aluminium CNC machined tail gear case. Fits Zoom 425 EP - 450 EP - 450 IC

T0502.220 Aluminium CNC machined tail pitch lever. Fits Zoom 425 EP - 450 EP - 450 IC

T0502.221 Precision tail pitch yoke set Fits Zoom 425 EP - 450 EP - 450 IC

T0502.222 Aluminium engine washer set, 10pcs. Fits Zoom 450 IC

T0502.223 Aluminium main frame washer set, 20pcs.Fits Zoom 425 EP - 450 EP - 450 IC

T0502.224 Aluminium main frame holder 4,5X25, 10pcs. Fits Zoom 425 EP - 450 EP - 450 IC

T0502.225 Aluminium main frame holder 4,5X45, 10pcs. Fits Zoom 425 EP - 450 EP - 450 IC

T0502.226 Aluminium main frame holder 4,5X8,5, 20pcs. Fits Zoom 425 EP - 450 EP - 450 IC

T0502.227 Aluminium CNC machined tail rotor grip set. Fits Zoom 425 EP - 450 EP - 450 IC

T0502.228 Alu. CNC mach. 3D main center block 4-O rings. Fits Zoom 425 EP - 450 EP - 450 IC

T0502.229 Alu. CNC mach. main shaft bearing block. Fits Zoom 425 EP - 450 EP - 450 IC

44-57Cat2009.indd 55

20-01-2009 21:19:01

RUNNER XB IC powered racing buggy

AST F , GER N O STR , R E BIGG

56-65Cat2009.indd 56

21-01-2009 01:03:03

TA RT E N G I N E

Item Nr:

Combo set T0870.2

READY TO RUN 1/10 SCALE IC POWERED RACING BUGGY This is the 4WD off road buggy you’ve been waiting for! Completely factory assembled with a high torque .18 pull start engine and matched tuned exhaust system you’ll be ready to race in no time! The sturdy aluminium chassis holds preinstalled engine, R/C equipment, servos and awesome suspension system! Packed with features like rear & front anti roll bar for added traction out of corners and high performance long travel "Big Bore" shock absorbers you’ll be edging over the start line early for one of these!

DED

SX-1

1/10 SCALE 4WD 3DIFF

TECHNICAL SPECIFICATIONS Length 430 mm Width 280 mm Height 205 mm Wheelbase 300 mm Weight 2580 g

RUNNER XB RTR RTR

FEATURES • 100% Pre-built • PROTECH SX-18 pull start engine • 2-Channel steering wheel radioset • Painted & trimmed body • 20 Sealed ball bearings • Countersunk alu. T6 chassis • CVD universal joints front • 3 Diff. with steel planetary gears • Metal spiral bevel gears & pinions • Fibreglass disc brake • 2-Shoe racing clutch • 4 “Big Bore” hydraulic constant volume shock absorbers • Nylon moulded side guards • Dustproof injection moulded radiogear box • Adjustable wing mount • Racing tuned pipe & manifold • High grip off-road tyres (1/8th style)

COMBO SET CONTENTS • Car 100% assembled with painted & trimmed body shell • 2-Channel pistol grip radio

REQUIRED FOR OPERATION • Daytona fuel 16% nitro 1L #D14161 • 12x AA size penlight Ni-Cd cells • Nitro starter set

56-65Cat2009.indd 57

21-01-2009 00:56:53

RUNNER MT IC powered racing buggy R

, R E NG

TE S A F

TR S , ER G G BI

56-65Cat2009.indd 58

21-01-2009 00:57:03

RUNNER MT RTR RTR Item Nr: TECHNICAL SPECIFICATIONS Length 430 mm Width 280 mm Height 205 mm Wheelbase 300 mm Weight 2580 g

FEATURES • 100% Pre-built • PROTECH SX-18 pull start engine • 2-Channel steering wheel radioset • Painted & trimmed body • 20 Sealed ball bearings • Countersunk alu. T6 chassis • CVD universal joints front • 3 Diff. with steel planetary gears • Metal spiral bevel gears & pinions • Fibreglass disc brake • 2-Shoe racing clutch • 4 “Big Bore” hydraulic constant volume shock absorbers • Nylon moulded side guards • Dustproof injection moulded radiogear box • Racing tuned pipe & manifold • High grip off-road tyres (1/8th style)

DED

SX-1

RT E N G I N S TA E

READY TO RUN 1/10 SCALE IC POWERED RACING TRUGGY This is the 4WD off road truggy based on the RUNNER XB. Completely factory assembled with a high torque .18 pull start engine and matched tuned exhaust system you’ll be ready to race in no time! The sturdy aluminium chassis holds preinstalled engine, R/C equipment, servos and awesome suspension system! Packed with features like rear & front anti roll bar for added traction out of corners and high performance long travel "Big Bore" shock absorbers you’ll be edging over the start line early for one of these!

1/10 SCALE 4WD 3DIFF

Combo set T0880.2

COMBO SET CONTENTS • Car 100% assembled with painted & trimmed body shell • 2-Channel pistol grip radio

REQUIRED FOR OPERATION • Daytona fuel 16% nitro 1L #D14161 • 12x AA size penlight Ni-Cd cells • Nitro starter set

56-65Cat2009.indd 59

21-01-2009 00:57:08

RADICAL MT IC powered monster truck

EAR G D E -SPE

E D U L C OX IN

56-65Cat2009.indd 60

21-01-2009 00:57:20

RADICAL MT RTR RTR Item Nr: TECHNICAL SPECIFICATIONS Length 500 mm Width 375 mm Height 190 mm Wheelbase 330 mm Weight 3300 g

FEATURES • 100% Pre-built • PROTECH SX-18 pull start engine • 2-Channel steering wheel radioset • Painted & trimmed body • 20 Sealed ball bearings • Countersunk alu. T6 chassis • CVD universal joints front • 3 Diff. with steel planetary gears • Metal spiral bevel gears & pinions • Fibreglass disc brake • 2-Shoe racing clutch • 4 “Big Bore” hydraulic constant volume shock absorbers • Nylon moulded side guards • Dustproof injection moulded radiogear box • Racing tuned pipe & manifold • High grip off-road tyres

DED

SX-1

RT E N G I N S TA E

READY TO RUN 1/10 SCALE IC POWERED MONSTER TRUCK If you are looking for the ultimate Fun Factor, the RADICAL MT is absolutely right for you. Completely factory assembled with a high torque .18 pull start engine and matched tuned exhaust system.The sturdy aluminium chassis holds preinstalled engine, R/C equipment, servos and awesome suspension system! Packed with features like rear & front anti roll bar for added traction out of corners and high performance long travel "Big Bore" shock absorbers you’ll be edging over the start line early for one of these!

1/10 SCALE 4WD 2SPEED

Combo set T0890.2

COMBO SET CONTENTS • Car 100% assembled with painted & trimmed body shell • 2-Channel pistol grip radio

REQUIRED FOR OPERATION • Daytona fuel 16% nitro 1L #D14161 • 12x AA size penlight Ni-Cd cells • Nitro starter set

56-65Cat2009.indd 61

21-01-2009 00:57:25

YADA ST IC powered racing buggy

RS S O IT CAR T E R R P M RT RT O C Y g O in R OU G T ild RS! E KIN bu CA L I WH MAAreCING E AR we RA

56-65Cat2009.indd 62

21-01-2009 00:57:37

YADA ST TA RT E N G I N E

DED

SX-2

1/8 SCALE 4WD

TECHNICAL SPECIFICATIONS Length 485 mm Width 305 mm Height 160 mm Wheelbase 334-340 mm Weight 3400 g

Item Nr:

COMBO SET CONTENTS • Car 100% assembled with painted & trimmed body shell • 2-Channel pistol grip radio

RTR RTR

Combo set T30.2

READY TO RUN 1/8 SCALE IC POWERED RACING BUGGY When you buy an RTR nitro buggy, you want one that doesn’t need a whole lot of upgrades. You want a buggy that performs straight out of the box even at competition level. The YADA ST RTR is engineered to handle and built to take it. With the YADA ST RTR you can feel how a top level 1/8 buggy handle, the perfect steering and balanced suspension will amaze you. FEATURES • 100% Pre-built • PROTECH SX-21 pull start engine • 2-Channel steering wheel radioset • High torque servos • Painted & trimmed body • 22 Sealed ball bearings • Ball type front suspension • Countersunk alu. T6 chassis • Aluminium T6 radio plate • Aluminium T6 shock stays • CVD universal joints front • 3 Diff. with steel planetary gears • Steel spiral bevel gears & pinions • Steel main gear • Double disc brake • 3-Shoe racing clutch • 4 Hydraulic constant volume shock absorbers • Nylon moulded side guards • Dustproof receiver box • Adjustable wing mount • Racing tuned pipe & manifold • High grip off-road tyres REQUIRED FOR OPERATION • Daytona fuel 16% nitro 1L #D14161 • 12x AA size penlight Ni-Cd cells • Nitro starter set

56-65Cat2009.indd 63

21-01-2009 00:57:48

YADA TRR IC powered racing truggy

56-65Cat2009.indd 64

21-01-2009 00:57:53

YADA TRR

TECHNICAL SPECIFICATIONS Length 550 mm Width 450 mm Height 180 mm Wheelbase 368-372 mm Weight 3600 g LS

TA RT E N G I N E

DED

SX-2

Combo set T33.1 (Euro) Combo set T33.1UK (UK)

READY TO RUN 1/8 SCALE IC POWERED TRUGGY A truggy is a combination of a buggy and a monster truck. It has the handling and agility of a buggy and the smooth long travel suspension of a monster truck. The YADA TRR RTR is fully packed with features you find on much more expensive racing truggyies. This Truggy performs out of the box without adding all expensive optionals.

Item Nr:

RTR RTR

FEATURES • 100% Pre-built • PROTECH SX-26 pull start engine • 2-Channel steering wheel radioset • High torque servos • Painted & trimmed body • 22 Sealed ball bearings • Ball type front suspension • Countersunk alu. T6 chassis • Aluminium T6 radio plate • Aluminium T6 shock stays • CVD universal joints front • 3 Diff. with steel planetary gears • Steel spiral bevel gears & pinions • Steel main gear • Double disc brake • 3-Shoe racing clutch • 4 Hydraulic constant volume shock absorbers • Dustproof receiver box • Adjustable wing mount • Racing tuned pipe & manifold • High grip off-road tyres

1/8 SCALE 4WD COMBO SET CONTENTS • Car 100% assembled with painted & trimmed body shell • 2-Channel pistol grip radio

REQUIRED FOR OPERATION • Daytona fuel 16% nitro 1L #D14161 • 12x AA size penlight Ni-Cd cells • Nitro starter set

56-65Cat2009.indd 65

21-01-2009 00:57:59

AVENGER 4 T0221.35M1 T0221.35M2 T0221.41M1 T0221.41M2

Item Nr: 35 MHz MODE 1 35 MHz MODE 2 41 MHz MODE 1 41 MHz MODE 2

4-CHANNEL FM DIGITAL PROPORTIONAL RADIO CONTROL SYSTEM Modern styled 4 channel digital proportional radio control system suitable for all kind of indoor & parkfly models as well for medium sized electric powered models. The radio features servo reverse function on all 4 channels, a charge socket and flightsimulator socket. The transmitter can be used as control system for the flight simulator REFLEX XTR, etc... The radio set is supplied with a long range 5 channel micro receiver and 3x B160 7.5g micro servos suitable for most small models. SET CONTENTS • 4 Channel transmitter • 5 Channel Micro receiver (long range) • 3 pcs Micro servos 7,5g B-160 • 1 pair of crystals R REQUIRED FOR OPERATION • 8 x LR-6 size cells (TX)

66-83cat2009.indd 66

20-01-2009 21:43:02

USB

FLIGHT SIMULATOR CONTROLLER

Item Nr: T0220 USB FLIGHT SIMULATOR CONTROLLER You want to learn the first steps of flying RC airplanes or helicopters or you want to improve your skills? This USB flight simulator controller is the perfect and affordable solution. Just connect the controller to one of the USB ports in your computer and install the supplied freeware FMS flight simulator. Kit contents • USB controller • CD-rom with FMS software (Free bonus) Minimum system requirements for FMS RC FLIGHT SIMULATOR • Pentium 3 or AMD 800Mhz • Minimum 128MB RAM • 1GB free hard disk space • CD-Rom drive • DirectX compatible soundcard • 3D acceleration graphic card min. 32MB • Windows 98SE / 2000 / XP operating system with DirectX 7.0 or higher notice The FMS RC Flight Simulator software is supplied free of charge in this package. Updates on the FMS flight simulator can be downloaded from the internet (http://www.flying-model-simulator.com) Protech can not be held responsible for problems or damage caused by the installation and use of this software.

66-83cat2009.indd 67

21-01-2009 01:24:35

only 7g

only 5.7 g

PRO.5-35 5-Ch. micro RX FM - 35 Mhz PRO.5-40 5-Ch. micro RX FM - 40 Mhz

PRO.303 NT-420 micro heading hold gyro

5-Channel narrow band FM micro receiver for indoor & parkflyers or small models. Single conversion. Compatible with any radio brand. Normal crystals can be fitted.

Extreme tail holding power in a micro package! This gyro features transmitter/manual switchable heading hold and built-in drift cancel circuit.

Channel: Input voltage: Weight: Dimensions: Range:

5 ch 3,5V ~ 7,0V 8g 31x17x9mm full range

Input voltage: 4,8V ~ 6.0V Weight: 5.7 g Dimensions: 20x20x10mm Gain: heading hold/standard

T0270 USB interface cable

B206 DIGITAL Servo B-206 BB

B207 DIGITAL Servo B-207 MG BB

USB interface cable connects almost all brands of transmitters to your PC for use with simulator software (not included), or use your transmitter as joystick with your preferred computer games.

Micro servo for use in the smallest models, indoor & parkflyers, small electric powered helicopters.

Economy high torque ball raced standard size servo for use in cars, boats and airplanes.

Input voltage: Weight: Dimensions: Torque: Speed:

Set includes adapters for FUTABA FF series (Square connector), FUTABA & HITEC Din, E-SKY / WALKERA / PROTECH mini Din 4,8V ~ 6,0V 11 g 20,8x20x12mm 2,5kg/cm @ 6,0V 0,13s/60째 @ 6,0V

4,8V ~ 6,0V 16 g 22,8x24,2x12mm 3,0 kg/cm @6,0V 0,11s/60째 @ 6,0V

66-83cat2009.indd 68

20-01-2009 21:43:10

FLIGHTPACKS

B170-C Servopack B170 (3pcs) Value servopack, buy 2 and get 1 free of charge. The B170 servo is perfectly suitable for indoor & parkflying models and small gliders.

T0226.350 Flightpack 35 MHz T0226.400 Flightpack 40 MHz T0226.410 Flightpack 41 MHz Value flightpack for indoor- & parkflying models containing a full range 6 channel micro receiver and 3 pcs of B170 7g micro servos. TECHNICAL SPECIFICATIONS B170 SERVO Input voltage: 4,8V ~ 6,0V Weight: 7g Dimensions: 24x11x24 mm Torque: 1,4 kg Speed: 0,12s/60째

TECHNICAL SPECIFICATIONS APOLLO ESC 18A Ni-xx cells: 6-10 cells Li-xx cells: 2-3 cells Cont. Amp: 18A Peak Amp: 23A BEC: 5V 3A

T0225.350 Flightpack + Brushless ESC 18A, 35 MHz T0225.400 Flightpack + Brushless ESC 18A, 40 MHz T0225.410 Flightpack + Brushless ESC 18A, 41 MHz Value flightpack for indoor- & parkflying models containing a full range 6 channel micro receiver, 3 pcs of B170 7g micro servos and a Apollo brushless ESC 18A (2-3 Li-Po cells).

66-83cat2009.indd 69

20-01-2009 21:43:20

Because of the great diversity in brushless motors on the market today, choosing a matching speed controller can be very difficult sometimes. That is why PROTECH has produced a series of multi-functional speed controllers that can be matched to virtually any existing brushless motor without elaborate setting up making them â&#x20AC;&#x153;plug and playâ&#x20AC;?.

PRO.E-CARD Programming card Apollo ESC

PRO.E18 Apollo brushless ESC 18A

PRO.E25 Apollo brushless ESC 25A

PRO.E30 Apollo brushless ESC 30A

Easy to use programming card to setup your Apollo Brushless ESC without connecting the ESC to your receiver.

The APOLLO series come with 2 timing modes (2-5/18 degrees) and 1 frequency mode (8 kHz).

Select your preferred settings with the jumper connectors and connect the card to the ESC. All programming is automatically set.

Input voltage: 5V ~ 12V Number of cells: 6-10 Number of Li-Po cells: 2 Brake: Yes Soft start: Yes Continuous current: 18A Peak current: 23A BEC: 5V 3A Weight (incl. wires): 21 g Dimensions: 47x22x7mm

Input voltage: 5V ~ 12V Number of cells: 6-10 Number of Li-Po cells: 2-3 Brake: Yes Soft start: Yes Continuous current: 25A Peak current: 35A BEC: 5V 3A Weight (incl. wires): 23g Dimensions: 47x22x7mm

Input voltage: 5V ~ 12V Number of cells: 6-10 Number of Li-Po cells: 2-3 Brake: Yes Soft start: Yes Continuous current: 30A Peak current: 40A BEC: 5V 3A Weight (incl. wires): 23g Dimensions: 47x22x7mm

PRO.E40 Apollo brushless ESC 40A

PRO.E45 Apollo brushless ESC 45A

PRO.E60 Apollo brushless ESC 60A

PRO.E70 Apollo brushless ESC 70A

Input voltage: 5V ~ 12V Number of cells: 6-10 Number of Li-Po cells: 2-3 Brake: Yes Soft start: Yes Continuous current: 40A Peak current: 50A BEC: 5V 3A Weight (incl. wires): 23g Dimensions: 47x22x7mm

Input voltage: 6V ~ 22V Number of cells: 6-16 Number of Li-Po cells: 2-6 Brake: Yes Soft start: Yes Continuous current: 45A Peak current: 55A BEC: OPTO Weight (incl. wires): 30g Dimensions: 70x22x7mm

Input voltage: 6V ~ 22V Number of cells: 6-16 Number of Li-Po cells: 2-6 Brake: Yes Soft start: Yes Continuous current: 60A Peak current: 70A BEC: OPTO Weight (incl. wires): 33g Dimensions: 70x22x7mm

Input voltage: 6V ~ 22V Number of cells: 6-16 Number of Li-Po cells: 2-6 Brake: Yes Soft start: Yes Continuous current: 70A Peak current: 80A BEC: OPTO Weight (incl. wires): 33g Dimensions: 70x22x7mm

66-83cat2009.indd 70

20-01-2009 21:43:22

PRO.E35H Apollo brushless ESC40A

T0186 Fail Safe unit

T0219 RX regulator for 2 lipo cells

Input voltage: 5V ~ 12V Number of Li-Po cells: 2-3 Brake: Yes Soft start: No Continuous current: 35A Peak current: 40A BEC: 5V 3A Timing: Auto Weight (incl. wires): 30g Dimensions: 47x22x7mm

The PROTECH Fail-Safe unit is plugged in between your receiver and throttle servo. If the receiver detects an interferred signal, no signal or if the receiver battery voltage is low, the throttle servo will move to a preset position.

Use your 2-cell Li-XX battery to power your receiver and servos. 5 or 6V switchable output.

Dimensions: 35x14x8mm Weight: approx. 8g Operating voltage: 4,8~6,0 V For AM and FM (PPM) use only

PRO.E29-H Apollo brushless ESC 30A

T0181 Voltspy II

Input voltage: 5V ~ 12V Number of Li-Po cells: 2-3 Brake: Programmable Soft start: No Continuous current: 30A Peak current: 35A BEC: 5V 3A Timming: Auto Weight (incl. wires): 23g Dimensions: 40x26x7mm

Ultra thin & lightweight on-board battery monitor for 4,8V and 6V RXbatterypacks. Weight: Dimension:

Dimensions: Weight: Output current: Output voltage:

20x30x7mm approx. 9g 3A 5~6,0 V

T0160 Battery checker 4,8V & 6V This handy unit measures the voltage of your RX batteries using a 400mA load. The readout is from a row of 10 LEDâ&#x20AC;&#x2122;s. Switch selectable for 4 or 5 cell battery packs.

4g 40x18x3mm T0162 Expanded scale voltmeter An analog meter to measure the voltage of RX & TX batteries under a 300mA load. Supplied with plug in leads and probes.

66-83cat2009.indd 71

20-01-2009 21:43:27

JR / HITEC MPX

PL010 Servo lead JR/HITEC, male

FUTABA

PL011 Servo lead JR/HITEC, female

FUTABA

PL020 Servo lead FUTABA, male

PL021 Servo lead FUTABA, female

JR / HITEC MPX

FUTABA

PL014 Y-lead JR/HITEC

PL024 Y-lead FUTABA

BEC

JR / HITEC MPX

PL013.10 Extension lead 10cm JR/HITEC

FUTABA

PL013.25 Extension lead 25cm JR/HITEC

FUTABA

PL023.10 Extension lead 10cm FUTABA

JR / HITEC FUTABA

PL045 Switch universal FUTABA/JR/HITEC

FUTABA

PL023.25 Extension lead 25cm FUTABA

BEC

PL030 BEC lead, male

BEC

JR / HITEC MPX

PL013.50 Extension lead 50cm JR/HITEC

FUTABA

PL023.50 Extension lead 50cm FUTABA

BEC

PL031 BEC lead, female

JR / HITEC MPX

PL013.100 Extension lead 100cm JR/HITEC

FUTABA

PL023.100 Extension lead 100cm FUTABA

BEC

PL033 Extension lead BEC

FUTABA

PL035 Switch harness BEC

PL016 Charge lead TX JR

PL026 Charge lead TX FUTABA/HITEC

PL037 Charge lead BEC

PL017 Charge lead RX JR/HITEC

PL027 Charge lead RX FUTABA

PL056 Charge lead Glowstart

PL057 Charging cable Dean connector

PL059 Charging cable universal RX + BEC

PL058 Charging cable multi functional

PL052 Charge lead universal

PL053 Charge lead sealed lead acid batteries

66-83cat2009.indd 72

20-01-2009 21:43:35

SILICON PL051 Charge lead TAMIYA

PVC PL071 Flexible PVC wire 0,25mm, 2x1m

SILICON PL080 Silicon wire 0,75mm, 2x1m

PL055 Conversion lead TAMIYA - Mini Tamiya

PVC PL072 Flexible PVC wire 0,50mm, 2x1m

SILICON PL081 Silicon wire 1,5mm, 2x1m

PL061 TX-battery lead JR

PVC PL073 Flexible PVC wire 0,75mm, 2x1m

SILICON PL082 Silicon wire 1,5mm, 2x1m

PL062 TX-battery lead FUTABA

SILICON

PL148 MPX connector FEMALE

PVC

PL147 MPX connector MALE

PVC

PL074 Flexible PVC wire 1,0mm, 2x1m

SILICON

PVC

PL075 Flexible PVC wire 1,5mm, 2x1m

SILICON

PL083 Silicon wire 2,5mm, 2x1m

PL076 Flexible PVC wire 2,5mm, 2x1m

SILICON

PL084 Silicon wire 2,5mm, 2x1m

PL085 Silicon wire 4,0mm, 2x1m

SILICON

SILICON PL054 Charge lead Tamiya special

SILICON PL256 DEANS connector MALE + Sil. wire 2,5mm

PL150 Tamiya male conn. w/ sil. wire 2,5mm

SILICON

PL151 Tamiya female conn. w/ sil. wire 2,5mm

PL115 Tamiya Y lead. w/ sil. wire 2,5mm

PL152 AMP male conn. w/ sil. wire 2,5mm

PL265 BEC connectors, 1pair

PL266 BEC connector MALE, 5pcs PL268 BEC connector MALE, 25pcs

PL267 BEC connector FEMALE, 5pcs PL269 BEC connector FEMALE, 25pcs

PL153 AMP female conn. w/ sil. wire 2,5mm

SILICON PL255 DEANS connector FEMALE + Sil. wire 2,5mm

66-83cat2009.indd 73

20-01-2009 21:44:09

G2 PL121 G2 gold connectors, 2pair

G2 PL122 G2 gold connectors, 5pair

G4 PL125 G4 gold connectors, 2pair

G2 PL123 G2 gold connectors, 50pair

G4 PL126 G4 gold connectors, 5pair

G3.5

G4 PL127 G4 gold connectors, 50pair

G3.5

G2 PL131 G3.5 gold connectors, 2pair

G3.5 PL132 G3.5 gold connectors, 5pair

G2 PL230 G2 gold connectors, 2pcs

G3.5

PL236 G3,5 gold connectors, 5pcs

PL237 G3,5 gold connectors, 25pcs

PL240 G4 gold connectors, 2pcs

PL140 High power connector, 1pair

PL141 High power connector male, 2pcs

PL142 High power connector female, 2pcs

PL146 High power connector female, 25pcs

PL250 DEANS connector 1 pair

PL251 DEANS connector MALE, 5pcs PL253 DEANS connector MALE, 25pcs

G2 PL231 G2 gold connectors, 5pcs

PL235 G3,5 gold connectors, 2pcs

G3.5 PL133 G3,5 gold connectors, 50pair

PL232 G2 gold connectors, 25pcs

PL241 G4 gold connectors, 5pcs

PL242 G4 gold connectors, 25pcs

PL143 High power connector male, 5pcs

PL144 High power connector female, 5pcs

PL145 High power connector male, 25pcs

PL252 DEANS connector FEMALE, 5pcs PL254 DEANS connector FEMALE, 25pcs

PL260 Micro connector, set PL261 Micro connector, 5pcs PL262 Micro connector, 50pcs

PL135 Battery Bars Gold Plated, 10pcs

G3.5

66-83cat2009.indd 74

21-01-2009 16:07:01

PL100 MINI TAMIYA connector, 1pair

PL101 MINI TAMIYA connector male, 5pcs

PL102 MINI TAMIYA connector female, 5pcs

PL103 MINI TAMIYA connector male, 25pcs

PL104 MINI TAMIYA connector female, 25pcs

PL110 TAMIYA connector, 1pair

PL111 TAMIYA connector male, 5pcs

PL112 TAMIYA connector female, 5pcs

PL113 TAMIYA connector male, 50pcs

PL114 TAMIYA connector female, 50pcs

PL116 AMP connector, 1pair

PL117 AMP connector male, 5pcs

PL118 AMP connector female, 5pcs

PL119 AMP connector male, 50pcs

PL120 AMP connector female, 50pcs

PL160 TAMIYA motor connectors, 2sets

PL161 TAMIYA motor connectors, 5sets

PL162 TAMIYA motor connectors, 50sets

PL163 TAMIYA motor conn. + sil. wire, 1pair

PL164 TAMIYA motor conn. + sil. wire, 1pair

PL173 Banana plugs 4mm, 1pair

PL170 Car battery clips, 1pair

PL171 Crocodile clips for bananaplugs, 1pair

PL172 Crocodile clips standard, 1pair

66-83cat2009.indd 75

20-01-2009 21:45:08

PL190 Heat shrink 46mm, 1m, orange

PL180 Heat shrink tubing 2mm, 2x25cm

PL181 Heat shrink tubing 3mm, 2x25cm

PL182 Heat shrink tubing 4mm, 2x25cm

PL183 Heat shrink tubing 6mm, 2x25cm

PL184 Heat shrink tubing 9mm, 2x25cm

PL191 Heat shrink 50mm, 1m, transp.

PL192 Heat shrink 70mm, 1m, red

PL193 Heat shrink 70mm, 1m, blue

PL195 Heat shrink 70mm, 1m, transp.

PL194 Heat shrink 91mm, 1m, transp

66-83cat2009.indd 76

20-01-2009 21:45:34

66-83cat2009.indd 77

20-01-2009 21:45:44

RX -TX CHARGER E FOR SUITABL DS ALL BRAN

Item Nr: T0242 Euro version T0242.UK UK version This 220/230V mains charger is especially designed to charge your transmitter and receiver batteries overnight. The charge current on both outputs is 150 mA.

• AC 220/230V input voltage • 6-8 cells transmitter battery charge output. Charge current: 150mA • Reverse polarity TX charging jack to suit every brand of radiosystem on the market. • 4-5 cells receiver battery charge output. Charge current: 150mA

66-83cat2009.indd 78

20-01-2009 21:45:46

MULTI CHARGER 4 UP TO CHARGE S 4 DEVICE

Item Nr: T0256 Euro version T0256.UK UK version This multifunctional 220/230V mains adaptercharger is especially designed to charge 3 devices. You can charge your transmitter, receiver, glowstarter and 7,2V powerpack with the same charger. • AC 220/230V input voltage • 6-8 cells transmitter battery charge output. Charge current: 150mA • Reverse polarity TX charging jack to suit every brand of radiosystem on the market. • 4-5 cells receiver battery charge output. Charge current: 150mA • BEC connector (RX output) • 1,2V Glowstart battery charge output. Charge current: 200mA • 7,2V Powerpack charge output. Charge current: 200mA

66-83cat2009.indd 79

20-01-2009 21:45:51

MULTI 6 E TS CAN B U P T U O ALL 6 EOUSLY N A T L U M USED SI

Item Nr: T0241 Euro version T0241.UK UK version The Multi Charger 6 is designed to charge Ni-Cd, Ni-MH and Lead acid batteries. You can select out of 6 output ranges from 50 to 500 mA.

• AC 220/230V input voltage • For Ni-Cd, Ni-MH and Lead Acid batteries • All six outputs can be used simultaneously • LED display for each output • Charge current output 50 - 60 - 80 - 140 - 180 - 500mA • Safety transformer • Reverse polarity protection • Fused AC input

66-83cat2009.indd 80

20-01-2009 21:45:54

MEGA PEAK 3000

UP TO 3A CURRENT CHARGE

Item Nr: T0230 Euro version T0230.UK UK version The Mega Peak 3000 is the ideal Ni-Cd & Ni-MH battery charger for cars and electric glider pilots. The fast charger is fully automatic using a delta-peak cut off system. With the RX and TX charging output you can charge your receiver and transmitter batteries. • AC 220/230V & DC 12V input voltage • For Ni-Cd & Ni-MH batteries • Delta peak cut-off system (fast charge) • Auto trickle charge • Charging output RX & TX • Outputs: Fast charge

6 - 8 cells 3000mA 7,2 - 9,6V

RX:

4 - 5 cells 150mA 4,8 - 6V

TX:

6-8 cells 150mA 7,2 - 9,6V

• Safety transformer • Reverse polarity protection • Fused AC input / DC output

66-83cat2009.indd 81

20-01-2009 21:46:01

MEGA PEAK 4500

A UP TO 5,5 NT CURRE CHARGE

Item Nr: T0258 Euro version T0258.UK UK version The Mega Peak 4500 charger is the ideal Ni-Cd & Ni-MH battery charger for car and electric glider pilots. The high power fast charger is fully automatic using a delta-peak cut off system. The LCD display gives you accurate information about the selected charge current. The charger features a discharge function. With the RX and TX charge output you can charge your receiver and transmitter batteries simultaneously. • AC 220/230V & DC 12V input voltage • For Ni-Cd & Ni-MH batteries • Delta peak cut-off system (fast charge) • Auto trickle charge • LCD display • Temperature sensor • Outputs: Fast charge

RX: TX:

4 - 8 cells (7,2 - 9,6V) AC: 0,1 to 4,5A DC: 0,1 to 5,5A 4 - 5 cells 150mA 4,8 - 6V 6-8 cells 150mA 7,2 - 9,6V

• Discharge function • Reverse polarity protection Magnetic temperature sensor prevents overcharging from Ni-MH batteries

• Power switching supply • Fused AC input / DC output

66-83cat2009.indd 82

20-01-2009 21:46:04

66-83cat2009.indd 83

20-01-2009 23:36:07

Large cooling slots for optimal heat transfer.

Multiple fixation possibilities.*

CNC-machined aluminium radial mount system* available

Adapts easily to existing firewall.*

84-91cat2009.indd 84

(*) radial mount system optional

20-01-2009 21:48:30

MC28-2225

MC28-2227

Max Power: 85W KV: 1460 rpm/v Weight: 26 g

MC28-3009

MC28-2609

Max Power: 55 W KV: 1380 rpm/v Weight: 26 g

Max Power: 115 W KV: 1850 rpm/v Weight: 41 g

MC28-3012

Max Power: 200 W KV: 1280 rpm/v Weight: 54 g

MC42-4010

MC50-6509

MC50-6507

Max Power: 1330 W KV: 420 rpm/v Weight: 387 g

Max Power: 1295 W KV: 325 rpm/v Weight: 387 g

RADIAL MOUNT SYSTEM

For 28 series: MC28-100 For 35 series: MC35-100 For 42 series: MC42-100 For 50 series: MC50-100

MC28-2225 MC28-2227 MC28-2609 MC28-2612 MC28-2614 MC28-3009 MC28-3012 MC35-3010 MC35-3605 MC35-3606 MC42-4010 MC42-5007 MC42-6005 MC50-5506 MC50-5508 MC50-6507 MC50-6509

Max Power: 420 W KV: 1200 rpm/v Weight: 105 g

MC50-5506

Max Power: 850 W KV: 700 rpm/v Weight: 260 g

Ref. nr.

MC35-3606

Max Power: 465 W KV: 1430 rpm/v Weight: 105 g

MC42-6005

Max Power: 795 W KV: 700 rpm/v Weight: 195 g

Max Power: 130 W KV: 1260 rpm/v Weight: 41 g

MC35-3605

Max Power: 275 W KV: 1350 rpm/v Weight: 75 g

MC42-5007

MC28-2614

Max Power: 155 W KV: 1410 rpm/v Weight: 41 g

MC35-3010

Max Power: 155 W KV: 910 rpm/v Weight: 54 g

Max Power: 500 W KV: 950 rpm/v Weight: 130 g

MC28-2612

MC50-5508

Max Power: 1070 W KV: 730 rpm/v Weight: 290 g

Voltage Range

Nb Li-Po

RPM/V

Dimensions (mm)

7,2-11,1V 6-7,4V 6-7,4V 7,4 - 11,1V 7,4 - 11,1V 7,4 - 11,1V 7,4 - 11,1V 7,4 - 11,1V 7,4 - 11,1V 7,4 - 11,1V 7,2-14,8V 11,1-18,5V 11,1-18,5V 11,1-18,5V 14,8-18,5V 14,8-22,2V 14,8-25,9V

2-3 2 2 2-3 2-3 2-3 2-3 2-3 2-3 2-3 2-4 3-5 3-5 3-5 4-5 4-6 4-7

1460 1380 1850 1410 1260 1280 910 1350 1430 1200 950 700 700 730 550 420 325

Ø28x22 Ø28x22 Ø28x26 Ø28x26 Ø28x26 Ø28x30 Ø28x30 Ø35x30 Ø35x36 Ø35x36 Ø42x40 Ø42x50 Ø42x60 Ø50x55 Ø50x55 Ø50x65 Ø50x65

Weight Shaft diameter (g) (mm) 26g 26g 41g 41g 41g 54g 54g 75g 105g 105g 130g 195g 260g 290g 290g 387g 387g

Ø 3,2mm Ø 3,2mm Ø 3,2mm Ø 3,2mm Ø 3,2mm Ø 3,2mm Ø 3,2mm Ø 4mm Ø 4mm Ø 4mm Ø 5mm Ø 5mm Ø 5mm Ø 6mm Ø 6mm Ø 6mm Ø 6mm

Max. load current (A/60sec.) 8A 7A 16A 14A 12A 18A 14A 25A 42A 38A 34A 43A 46A 58A 55A 60A 50A

Max Power: 1020 W KV: 550 rpm/v Weight: 290 g

Max. power (W/60sec.)

Max. thrust (kg)

Propeller

85W 55W 115W 155W 130W 200W 155W 275W 465W 420W 500W 795W 850W 1070W 1020W 1330W 1295W

0,32kg 0,38kg 0,85kg 0,65kg 0,60kg 0,85kg 0,80kg 1,20kg 1,30kg 1,20kg 1,80kg 2,10kg 2,50kg 3,50kg 3,10kg 4,20kg 4,60kg

8x4,3 8x4,3 9x4,7 8x6 9x6 8x6 9x6 10x6 10x6 10x6 11x5,5 12x8 12x8 12x6,5 15x8 16x8 17x8

84-91cat2009.indd 85

20-01-2009 21:48:36

A range of propellers designed for small and slowfly electric powered models. The shape of the extra thin blades is developed to guarantee optimum performance and low power consumption. The propellers are made from glass reinforced nylon for extra strength and can be used up to 7000 rpm/min.

Ref. nr.

Description (1 pc)

PH8060 Hyperdrive propeller 8x6 PH9075 Hyperdrive propeller 9x7,5 PH1080 Hyperdrive propeller 10x8

Ref. nr. PI2508 PI2510 PI3020 PI3030 PI4025 PI4040 PI4530 PI4540 PI5030 PI5043 PI6030 PI7035 PI8040 PI9050 PI1060 PI1170 PI1280

Description (1 pc) Indoor prop direct drive 2,5x0.8 Indoor prop direct drive 2,5x1 Indoor prop direct drive 3x2 Indoor prop direct drive 3x3 Indoor prop direct drive 4x2,5 Indoor prop direct drive 4x4 Indoor prop direct drive 4,5x3 Indoor prop direct drive 4,5x4 Indoor prop direct drive 5x3 Indoor prop direct drive 5x4.3 Indoor prop direct drive 6x3 Indoor prop direct drive 7x3,5 Indoor prop direct drive 8x4 Indoor prop direct drive 9x5 Indoor prop direct drive 10x6 Indoor prop direct drive 11x7 Indoor prop direct drive 12x8

Ref. nr.

Description (1 pc)

PS6050 PS7060 PS8043 PS8060 PS9047 PS9070 PS1047 PS1080 PS1147 PS1180 PS1260 PS1280 PS1365 PS1390 PS1470 PS1410 PS1575 PS1510

Slow fly propeller for geared motors 6x5 Slow fly propeller for geared motors 7x6 Slow fly propeller for geared motors 8x4,3 Slow fly propeller for geared motors 8x6 Slow fly propeller for geared motors 9x4,7 Slow fly propeller for geared motors 9x7 Slow fly propeller for geared motors 10x4,7 Slow fly propeller for geared motors 10x8 Slow fly propeller for geared motors 11x4,7 Slow fly propeller for geared motors 11x8 Slow fly propeller for geared motors 12x6 Slow fly propeller for geared motors 12x8 Slow fly propeller for geared motors 13x6,5 Slow fly propeller for geared motors 13x9 Slow fly propeller for geared motors 14x7 Slow fly propeller for geared motors 14x10 Slow fly propeller for geared motors 15x7,5 Slow fly propeller for geared motors 15x10

MA942 Motor mount set MEGAX 500-600

PS9070-3BL Slowfly 3-bladed propeller for geared motors 9x7

PS1080-4BL Slowfly 4-bladed propeller for geared motors 10x8

MA940 Motor mount set MEGAX 300

MA941 Motor mount set MEGAX 400

84-91cat2009.indd 86

20-01-2009 21:48:46

Precision spinner

Spare pins see list below

Spare collets see list below

Slot width Fits GRAUPNER* blades

Spare collets see list below Ref. nr. MA840 MA841 MA842 MA843 MA844 MA845 MA846

Description Precision aluminium spinner Ø30mm for 2,3mm shaft, 1pc Precision aluminium spinner Ø30mm for 3,0mm shaft, 1pc Precision aluminium spinner Ø30mm for 3,2mm shaft, 1pc Precision aluminium spinner Ø40mm for 3,0mm shaft, 1pc Precision aluminium spinner Ø40mm for 3,2mm shaft, 1pc Precision aluminium spinner Ø40mm for 4,0mm shaft, 1pc Precision aluminium spinner Ø40mm for 5,0mm shaft, 1pc

Spare collet MA840.1 MA841.1 MA842.1 MA843.1 MA844.1 MA845.1 MA846.1

Ref. nr. MA820 MA821 MA822 MA823 MA824 MA825 MA826 MA827 MA828 MA829 MA830

Description Precision spinner compl. Ø30mm for 2,3mm shaft Precision spinner compl. Ø30mm for 3,0mm shaft Precision spinner compl. Ø30mm for 3,2mm shaft Precision spinner compl. Ø40mm for 3,0mm shaft Precision spinner compl. Ø40mm for 3,2mm shaft Precision spinner compl. Ø40mm for 4,0mm shaft Precision spinner compl. Ø40mm for 5,0mm shaft Precision spinner compl. Ø40mm for 3,0mm shaft Precision spinner compl. Ø40mm for 3,2mm shaft Precision spinner compl. Ø40mm for 4,0mm shaft Precision spinner compl. Ø40mm for 5,0mm shaft

Slot width 5mm 5mm 5mm 6mm 6mm 6mm 6mm 8mm 8mm 8mm 8mm

PinØ 2mm 2mm 2mm 2mm 2mm 2mm 2mm 3mm 3mm 3mm 3mm

Spare collet MA820.1 MA821.1 MA822.1 MA823.1 MA824.1 MA825.1 MA826.1 MA823.1 MA824.1 MA825.1 MA826.1

Spare pins (2x) MA820.2 MA820.2 MA820.2 MA823.2 MA823.2 MA823.2 MA823.2 MA827.2 MA827.2 MA827.2 MA827.2

MA800 Collet prop adapter for 2mm shaft M5, 1pc

MA801 Collet prop adapter for 2,3mm shaft M5, 1pc

MA802 Collet prop adapter for 3mm shaft M5, 1pc

MA803 Collet prop adapter for 3,2mm shaft M5, 1pc

MA804 Collet prop adapter for 4mm shaft M6, 1pc

MA805 Collet prop adapter for 5mm shaft M6, 1pc

MA806 Collet prop adapter for 5mm shaft M8, 1pc

MA807 Collet prop adapter for 6mm shaft M8, 1pc

MA810 Screw type adapter for 2,3mm shaft M6, 1pc

MA812 Screw type adapter for 2,3mm shaft M8, 1pc

MA811 Screw type adapter for 3,2mm shaft M6, 1pc

MA813 Screw type adapter for 3,2mm shaft M8, 1pc

MA814 Screw type adapter for 4mm shaft M8, 1pc

MA815 Screw type adapter for 5mm shaft M8, 1pc

MA816 Screw type adapter for 5mm shaft M10, 1pc

MA817 Screw type adapter for 6mm shaft M10, 1pc

Ref. nr. MA800 MA801 MA802 MA803 MA804 MA805 MA806 MA807

Description Collet propeller adapter for 2,0mm shaft M5, 1pc Collet propeller adapter for 2,3mm shaft M5, 1pc Collet propeller adapter for 3,0mm shaft M5, 1pc Collet propeller adapter for 3,2mm shaft M5, 1pc Collet propeller adapter for 4,0mm shaft M6, 1pc Collet propeller adapter for 5,0mm shaft M6, 1pc Collet propeller adapter for 5,0mm shaft M8, 1pc Collet propeller adapter for 6,0mm shaft M8, 1pc

Spare collet MA800.1 MA801.1 MA802.1 MA803.1 MA804.1 MA805.1 MA806.1 MA807.1

Ref. nr. MA810 MA812 MA811 MA813 MA814 MA815 MA816 MA817

Description Screw type propeller adapter for 2,3mm shaft M6, 1pc Screw type propeller adapter for 2,3mm shaft M8, 1pc Screw type propeller adapter for 3,2mm shaft M6, 1pc Screw type propeller adapter for 3,2mm shaft M8, 1pc Screw type propeller adapter for 4,0mm shaft M8, 1pc Screw type propeller adapter for 5,0mm shaft M8, 1pc Screw type propeller adapter for 5,0mm shaft M10, 1pc Screw type propeller adapter for 6,0mm shaft M10, 1pc

84-91cat2009.indd 87

20-01-2009 21:49:17

2cm3

Performance pull start engines M1040 SX-12 engine w/ pull start

3,5cm3

Performance pull start engines

M1041 SX-12 ‘factory tuned’ engine w/ pull start

M1020 slide carb. M1021 rotary carb. SX-15 ‘factory tuned’ engine w/ pull start

M1042 SX-21 3P ‘factory tuned’ engine w/ pull start

3,5cm3

Performance pull start engines M1043 SX-21 8P OMEGA engine w/ pull start

4,2cm3

Performance engines M1044 SX-21 8P OMEGA engine w/ boost chamber Ref. nr. M1020 M1040 M1041 M1042 M1043 M1044 M1045

2,5cm3

ø 9mm

Performance pull start engines M1045 SX-26 engine w/ pull start

Description SX-15 ‘factory tuned’ engine w/ pull start SX-12 engine w/ pull start SX-12 ‘factory tuned’ engine w/ pull start SX-21 3P ‘factory tuned’ engine w/ pull start SX-21 8P OMEGA w/ pull start SX-21 8P OMEGA engine w/ boost chamber SX-26 3P ‘factory tuned’ engine w/ pull start

HP 1,2 1,05 1,1 1,9 2,3 2,4 2,1

M1043.020 9mm slide carburator Fits M1042, M1043, M1044 RPM 3.000-33.000 3.000-30.000 3.000-32.000 3.000-35.000 3.000-40.000 3.000-40.000 3.000-35.000

Carb.Ø 5,5mm slide 5,5mm slide 5,5mm slide 7mm slide 7mm slide 7mm slide 7mm slide

Crankshaft std M5 std M5 std M5 std1/4-28UNF std1/4-28UNF std1/4-28UNF std1/4-28UNF

These engines are specially produced by a world leading manufacturer according to our high specifications. This results in well finished, reliable & powerful engines.

AIRPLANE ENGINE 6,5cm3

Performance airplane engine

M1046 SX-46 ABC BB airplane engine • 2 ball bearings • ABC liner-piston • 1,62 Hp • 2.000-17.000 rpm • 1/4-28UNF crankshaft thread

84-91cat2009.indd 88

21-01-2009 16:04:50

1/10 CAR pipes

1/10 CAR manifold

T0620.104 Tuned pipe set for 1/10 touring cars. Fits NITRO FUN 4WD, NITRO SHAFT, MSX-3, KYOSHO ALPHA, AVIO RACING

T0660.226 Tuned pipe set for 1/10 touring cars. Fits NITRO TECH 12, NITRO FUN 2WD, HPI RS4, KYOSHO SPIDER, CEN TS-4, XT-4

T0620.105 Manifold 1/10 scale. Fits NITRO FUN 4WD, NITRO SHAFT, MSX-3, KYOSHO ALPHA, AVIO RACING

T60.080 Manifold 1/10 scale. Fits NITRO TECH 12, NITRO FUN 2WD, HPI RS4, KYOSHO SPIDER, CEN TS-4, XT-4

1/8 CAR manifold

1/8 CAR

T53.041 Manifold for 1/8 scale off-road cars.

T0600.048 1/10 scale Standard foam airfilter, set

T53.043 1/8 scale manifold spring

T0600.072 1/10 scale Replacement foam for T0600.048

T0660.100 1/10 scale Competition on-road foam air filter, set

T01.036.1 1/10 scale Off-road foam airfilter, set

T01.036.2 Foam filter element, 1pc

T51.051 1/8 scale Standard off-road foam airfilter w/ silicon connector 45째

84-91cat2009.indd 89

20-01-2009 21:49:53

HANDY, LIGHT & EXTREMELY POWERFUL

T0141.1 Starter rubber airplane

A453 Starter disc car 100mm

A451 Starter disc car 120mm

T0183 Electric geared engine starter 12V for engines up to 1.20 size. The starter is supplied with 2 aluminium cones. The small cone accepts spinners up to 70mm and the big cone up to 120mm.

Automatic glowdriver with glowshot charger included

M006 Starter box car

T0163 Digital tacho meter

Finally a universal starter box that you donâ&#x20AC;&#x2122;t have to assemble. The starter box can be used for both 1/8 and 1/10 scale on-and off-road vehicles. Just add your choice of two 6-cell battery packs or one 12V sealed lead acid battery. The starter box gives strong start with plenty of torque for even the most finicky of engines.

Precision propeller RPM measuring tool with LCD screen. Suitable for 2 and 3 bladed props. Measure up to 40.000 RPM.

84-91cat2009.indd 90

20-01-2009 21:50:03

T0101 Glow clip standard

T0101.2 Glow clip extra long

T0117 Peg glow clip

The PROTECH glow clips all feature a rugged metal construction, custom designed internal plug grip with a spring and sliding center contact, to give a perfect connection in all conditions.

The PROTECH glow clips all feature a rugged metal construction, custom designed internal plug grip with a spring and sliding center contact, to give a perfect connection in all conditions. The extra long version is especially for cowled engines, car engines and helicopters.

A lot of airplane modellers still prefer the peg type clip. PROTECH offers a high quality version with brass contact point.

T0119 Remote glow unit

T0102.2 Glow start with meter

T0102.5 Glow start with Ni-Cd battery

The ideal system for completely covered or difficult to access engines. This remote glow unit is supplied with 2 different glow plug adapters to fit most glow plugs on the market.

The ideal glow start for the active competition pilot. This blue anodised aluminium bodied glow start tests the condition of your glow plug during starts. If the meter needle indicates green, then the glow plug is in perfect condition. If the meter needle indicates red, the glow plug is broken or not operating correctly.

The glow start combines a locking glow clip together with a removable high capacity 1,2V rechargeable Ni-Cd battery.

8mm 9mm 10mm 12mm

T0102.4 Glow start with charger

T0102.4UK Glow start with charger UK

The glow start combines a locking glow clip together with a removable high capacity 1,2V rechargeable Ni-Cd battery. The set contents: high quality glow socket with blue anodised aluminium battery holder, 1,2V Ni-Cd battery and a 5 hours mains (230V AC) charger.

T0102.8 Glow start with charger

T0102.8UK Glow start with charger UK

The glow start combines a locking glow clip together with a high capacity 1,2V rechargeable Ni-Cd battery. The set contents: high quality glow socket with a 1,2V 1300mAh Ni-Cd battery and a 4 hours mains (230V AC) charger.

5.5mm 7mm 8mm 10mm

T0156 Cross wrench 4-way XL w/ glow plug holder

T0161 Cross wrench 4-way w/ glow plug holder

An internal clip holds the glow plug tight for easy installation and removal. This cross wrench is chrome plated for extra durability.

An internal clip holds the glow plug tight for easy installation and removal. The cross wrench is chrome plated for extra durability.

E0415 Fuel bottle 500ml

E0417 Fuel bottle 250ml

84-91cat2009.indd 91

20-01-2009 21:50:19

This DAYTONA range of high quality fuels is produced by the world champion fuel manufacturer Jonker. All fuels are mixed with a special oil composed of 3 different synthetic oils and castor oil. Designed by a chemical engineer especially for model engine use.

Ref. nr.

D14101 Daytona fuel CAR 10% 1L

D14102 Daytona fuel CAR 10% 2,5L

D14161 Daytona fuel CAR 16% 1L

D14162 Daytona fuel CAR 16% 2,5L

D14101 D14102 D14161 D14162 D14251 D14252

Description

Synthetic Castor oil % oil % Daytona fuel CAR 10% 1L 10% 2% Daytona fuel CAR 10% 2,5L 10% 2% Daytona fuel CAR 16% 1L 10% 2% Daytona fuel CAR 16% 2,5L 10% 2% Daytona fuel CAR 25% 1L 10% 2% Daytona fuel CAR 25% 2,5L 10% 2%

Nitro % 10% 10% 16% 16% 25% 25%

D16099 After run oil 50ml, 1pc Special after run oil to protect your engine from moisture and humidity impacts. Use this special after run oil before you want to store your engine for a longer period of time. Just remove your glowplug, put some drops of after run oil in your engine and turn the crankshaft around slowly. Your engine is fully protected.

D14252 Daytona fuel CAR 25% 2,5L

D14251 Daytona fuel CAR 25% 1L

92-103cat2009.indd 92

20-01-2009 21:53:37

PA011 Fuel filter standard LARGE, 1pc

PA012 Profi fuel filter SMALL, 1pc

PA013 Profi fuel filter LARGE, 1pc

PA017 Profi fuel filter LARGE w/ sintered bronze filter element, 1pc

PA009 Fuel filter standard SMALL, 2pc

PA014 Profi fuel filter EXTRA LARGE, 1pc

MA512 One way valve, 1 pc

PA020 Fueling valve SMALL, methanol, 1pc

PA021 Fueling valve LARGE, methanol, 1pc

PA022 Fueling valve LARGE, gasoline, 1pc

PA023 Fueling tip SMALL for PA020, 1pc

PA024 Fueling tip LARGE for PA021 & PA022, 1pc

MA173 Metal pressure nipple M3, 1pc

MA174 Metal pressure nipple M4, 1pc

MA305 Metal pressure nipple M5, 1pc

PA010 Metal pressure nipple M4, 90째, 1pc

PA003 Filling nozzle w/ filter, 1pc

PA015 Clutch w/ filter, 1pc

PA002 Fuel line stopper, 4pcs

PA001 Fuel stopper & mount, 2pcs

Rossi glowplugs, the perfect choice for performance. This range of glowplugs is manufactured by a world leading Italian manufacturer. The number indicates the thickness of the heating wire. The highest number is the coldest plug available.

R10001 ROSSI glow plug P1, HOT, 1pc

R10002 ROSSI glow plug P2, HOT, 1pc

R10003 ROSSI glow plug P3, MEDIUM, 1pc

R10004 ROSSI glow plug P4, COLD, 1pc

R10005 ROSSI glow plug P5, EXTRA COLD, 1pc

R10006 ROSSI glow plug P6, COLD, 1pc

R10007 ROSSI glow plug P7, COLD, 1pc

R10008 ROSSI glow plug P8, EXTRA COLD, 1pc

T0147 Hand crank fuel pump, 1pc

T0148 Electric fuel pump 12V, 1pc

High quality hand crank fuel pump to fill or drain the fuel tank of your model. The hand crank fuel pump can be used for all types of methanol based fuels.

High quality electric fuel pump to fill or drain the fuel tank of your model. The pump can be used for all types of methanol based fuels. Can be used as stand alone unit or built-in in a field box.

92-103cat2009.indd 93

20-01-2009 21:53:44

Ref. nr.

Description

MA600 MA600.25 MA601 MA601.25 MA601.50 MA602 MA602.25 MA603 MA603.25 MA610 MA610.25

Silicon tube blue-line Silicon tube blue-line Silicon tube blue-line Silicon tube blue-line Silicon tube blue-line Silicon tube blue-line Silicon tube blue-line Silicon tube blue-line Silicon tube blue-line Silicon tube blue-line Silicon tube blue-line

Interior Ø 2,0mm 2,0mm 2,0mm 2,0mm 2,0mm 2,0mm 2,0mm 2.5mm 2.5mm 10,0mm 10,0mm

Exterior Ø 3,5mm 3,5mm 5,0mm 5,0mm 5,0mm 6,0mm 6,0mm 6,0mm 6,0mm 14.0mm 14.0mm

Wall Length in thickness package 0,75mm 1m 0,75mm 25m 1,50mm 1m 1,50mm 25m 1,50mm 50m 2,00mm 1m 2,00mm 25m 1,75mm 1m 1,75mm 25m 2,00mm 1m 2,00mm 25m

MA176 Plastic tube coupler elbow, 1pc

MA177 Plastic tube coupler straight, 1pc

MA178 Plastic tube coupler ‘T-piece’, 1pc

MA300 Silicon exhaust deflector 45°, 10mm, 1pc

MA611.010 Silicon exhaust tube blue-line 11x15mm, 10cm MA611.025 Silicon exhaust tube blue-line 11x15mm, 25cm MA611.050 Silicon exhaust tube blue-line 11x15mm, 50cm

MA612.010 Silicon exhaust tube blue-line 15x21mm, 10cm MA612.025 Silicon exhaust tube blue-line 15x21mm, 25cm MA612.050 Silicon exhaust tube blue-line 15x21mm, 50cm

MA613.010 Silicon exhaust tube blue-line 19x25mm, 10cm MA613.025 Silicon exhaust tube blue-line 19x25mm, 25cm MA613.050 Silicon exhaust tube blue-line 19x25mm, 50cm

MA303 Silicon exhaust deflector 45°, 6mm, 1pc

MA302 Silicon exhaust deflector 45°, 8mm, 1pc

MA630 Fuel tube TYGON 4041 3x6mm, 1m MA630.2 Fuel tube TYGON 4041 3x6mm, 2m

MA631 Fuel tube NEOPRENE 3x6mm, 1m MA631.2 Fuel tube NEOPRENE 3x6mm, 2m

J20101 Silicon tube YELLOW 2x5mm, 1m J20101.25 Silicon tube YELLOW 2x5mm, 25m

J20102 Silicon tube RED 2x5mm, 1m J20102.25 Silicon tube RED 2x5mm, 25m

J20103 Silicon tube GREEN 2x5mm, 1m J20103.25 Silicon tube GREEN 2x5mm, 25m

92-103cat2009.indd 94

20-01-2009 21:54:14

MA162 Fuel tank 55ml 35x29x68mm

MA163 Fuel tank 110ml 48x38x89mm

MA164 Fuel tank 170ml 51x42x97mm

MA165 Fuel tank 227ml 56x47x102mm

MA166 Fuel tank 284ml 62x48x120mm

MA167 Fuel tank 340ml 67x47x129mm

MA168 Fuel tank 400ml 68x58x128mm

MA186 Fuel tank 450ml 74x62x128mm

MA187 Fuel tank 570ml 77x62x141mm

MA427 Fuel tank 100ml 49x39x90mm

MA428 Fuel tank 150ml 50x47x94mm

MA429 Fuel tank 250ml 54x54x108mm

MA430 Fuel tank 300ml 60x54x112mm

MA431 Fuel tank 400ml 65x52x137mm

MA432 Fuel tank 500ml 69x65x154mm

MA433 Fuel tank 600ml 80x66x152mm

MA434 Fuel tank 1000ml 80x95x165mm

PA030 Fuel tank hardware STANDARD, 1set

PA031 Fuel tank hardware LARGE, 1set

MA440 MA441

Fuel tank hardware METHANOL Fuel tank hardware GASOLINE

92-103cat2009.indd 95

20-01-2009 21:54:33

Ref. nr. AP13040 AP13060 AP13070 AP13080 AP13090 AP13590

Ref. nr. AP06030 AP06040 AP07030 AP07040 AP07050 AP07060 AP07060-P AP07070 AP07080 AP08040 AP08050 AP08060 AP08070 AP08080 AP09040 AP09050 AP09060 AP09060-P AP09070 AP09080 AP09560 AP10030 AP10040 AP10050 AP10060 AP10060-P

Description (1pc) APC propeller 6x3 APC propeller 6x4 APC propeller 7x3 APC propeller 7x4 APC propeller 7x5 APC propeller 7x6 APC propeller 7x6 pusher APC propeller 7x7 APC propeller 7x8 APC propeller 8x4 APC propeller 8x5 APC propeller 8x6 APC propeller 8x7 APC propeller 8x8 APC propeller 9x4 APC propeller 9x5 APC propeller 9x6 APC propeller 9x6 pusher APC propeller 9x7 APC propeller 9x8 APC propeller 9,5x6 APC propeller 10x3 APC propeller 10x4 APC propeller 10x5 APC propeller 10x6 APC propeller 10x6 pusher

Ref. nr. AP10070 AP10070-P AP10080 AP10545 AP10560 AP11030 AP11040 AP11050 AP11060 AP11060-P AP11070 AP11070-P AP11080 AP11090 AP11010 AP11540 AP11560 AP12040 AP12050 AP12060 AP12070 AP12080 AP12090 AP12010 AP12338 AP12560

Description (1pc) APC propeller 10x7 APC propeller 10x7 pusher APC propeller 10x8 APC propeller 10,5x4,5 APC propeller 10,5x6 APC propeller 11x3 APC propeller 11x4 APC propeller 11x5 APC propeller 11x6 APC propeller 11x6 pusher APC propeller 11x7 APC propeller 11x7 pusher APC propeller 11x8 APC propeller 11x9 APC propeller 11x10 APC propeller 11,5x4 APC propeller 11,5x6 APC propeller 12x4 APC propeller 12x5 APC propeller 12x6 APC propeller 12x7 APC propeller 12x8 APC propeller 12x9 APC propeller 12x10 APC propeller 12,25x3,75 APC propeller 12,5x6

Description (1pc) APC propeller 13x4 APC propeller 13x6 APC propeller 13x7 APC propeller 13x8 APC propeller 13x9 APC propeller 13,5x9

AP14050 APC propeller 14x5 AP14060 APC propeller 14x6 AP14060-P APC propeller 14x60-P AP14070 APC propeller 14x7 AP14080 APC propeller 14x8 AP14010 APC propeller 14x10 AP15060 APC propeller 15x6 AP15080 APC propeller 15x8 AP15010 APC propeller 15x10 AP16060 APC propeller 16x6 AP16080 APC propeller 16x8 AP16010 APC propeller 16x10 AP17060 APC propeller 17x6 AP17080 APC propeller 17x8 AP17012 APC propeller 17x12 AP18080 APC propeller 18x8 AP18010 APC propeller 18x10 AP18012 APC propeller 18x12 AP20080 APC propeller 20x8 AP20010 APC propeller 20x10 AP20012 APC propeller 20x12 AP20014 APC propeller 20x14 AP21010 APC propeller 21x10 AP22010 APC propeller 22x10 AP22014 APC propeller 22x14 AP24014 APC propeller 24x14 AP26014 APC propeller 26x14 APC THIN ELECTRIC SERIES AP06055E APC THIN EP prop 6x5,5 AP07050E APC THIN EP prop 7x5 AP08040E APC THIN EP prop 8x4 AP08060E APC THIN EP prop 8x6 AP08060EP APC THIN EP 8x6 pusher AP08080E APC THIN EP prop 8x8 AP09045E APC THIN EP prop 9x4,5 AP09060E APC THIN EP prop 9x6 AP09075E APC THIN EP prop 9x7,5 AP09090E APC THIN EP prop 9x9

Ref. nr. AP10050E AP10070E AP10010E AP11055E AP11070E AP11080E AP11085E AP11010E AP12060E AP12080E AP12010E AP12012E AP13040E AP13065E AP13080E AP13010E AP14070E AP14085E AP14010E AP14012E AP15040E AP15060E AP15080E AP15010E AP16080E AP16010E AP16012E AP17080E AP17010E AP17012E AP18080E AP18010E AP18012E AP19010E AP19012E AP20080E AP20010E AP20011E AP20013E AP20015E AP20514E

Description (1pc) APC THIN EP prop 10x5 APC THIN EP prop 10x7 APC THIN EP prop 10x10 APC THIN EP prop 11x5,5 APC THIN EP prop 11x7 APC THIN EP prop 11x8 APC THIN EP prop 11x8,5 APC THIN EP prop 11x10 APC THIN EP prop 12x6 APC THIN EP prop 12x8 APC THIN EP prop 12x10 APC THIN EP prop 12x12 APC THIN EP prop 13x4 APC THIN EP prop 13x6,5 APC THIN EP prop 13x8 APC THIN EP prop 13x10 APC THIN EP prop 14x7 APC THIN EP prop 14x8,5 APC THIN EP prop 14x10 APC THIN EP prop 14x12 APC THIN EP prop 15x4 APC THIN EP prop 15x6 APC THIN EP prop 15x8 APC THIN EP prop 15x10 APC THIN EP prop 16x8 APC THIN EP prop 16x10 APC THIN EP prop 16x12 APC THIN EP prop 17x8 APC THIN EP prop 17x10 APC THIN EP prop 17x12 APC THIN EP prop 18x8 APC THIN EP prop 18x10 APC THIN EP prop 18x12 APC THIN EP prop 19x10 APC THIN EP prop 19x12 APC THIN EP prop 20x8 APC THIN EP prop 20x10 APC THIN EP prop 20x11 APC THIN EP prop 20x13 APC THIN EP prop 20x15 APC THIN EP prop 20,5x14

T0163 Digital tacho meter Precision propeller RPM measuring tool with LCD screen. Suitable for 2 and 3 bladed props. Measure up to 40.000 RPM.

MA511 Rubber finger guard Protects your finger while starting your aircraft engine.

92-103cat2009.indd 96

20-01-2009 21:54:52

2-Blade MA560/. MA561/. MA562/. MA563/. MA565/.

Description Profi spinner Ø45mm Profi spinner Ø51mm Profi spinner Ø57mm Profi spinner Ø63mm Profi spinner Ø75mm

Available in different colours: W=white, G=yellow, R=red, Z=black

Tough, high impact spinners for right-hand rotation 2-bladed propellers. 2-Blade MA123/. MA124/. MA125/. MA126/. MA127/. MA128/. MA129/.

Description Nylon spinner Ø38mm Nylon spinner Ø44mm Nylon spinner Ø50mm Nylon spinner Ø57mm Nylon spinner Ø63mm Nylon spinner Ø69mm Nylon spinner Ø89mm

Available in different colours: G=yellow, R=red,

Z=black

D2 Description

MA865 Cone prop. nut MA866 Cone prop. nut

Size M5 M6 Ref. nr.

Description

Size

MA850 Alu. propellernut

MA851 Alu. propellernut

MA852 Alu. propellernut M7x1 MA853 Alu. propellernut M8x1 MA854 Alu. propellernut M8x1.25 MA855 Alu. propellernut M10x1 MA856 Alu. propellernut 1/4x28UNF MA857 Alu. propellernut 5/16x24UNF MA858 Alu. propellernut 3/8x24UNF

Ref. nr. MA552.14 MA552.24 MA552.34 MA552.44 MA552.45 MA552.46 MA552.54 MA552.55 MA552.56 MA552.64 MA552.74 MA552.75 MA552.76 MA552.84 MA552.85 MA552.86 MA552.94 MA552.95 MA553.14

Description Spinner adapter Spinner adapter Spinner adapter Spinner adapter Spinner adapter Spinner adapter Spinner adapter Spinner adapter Spinner adapter Spinner adapter Spinner adapter Spinner adapter Spinner adapter Spinner adapter Spinner adapter Spinner adapter Spinner adapter Spinner adapter Spinner adapter

A complete line of aluminium spinners ranging from 38mm to 165mm. All spinners are supplied with matching backplate and spinner adapter nut. The perfect concentric fit guarantees maximum strength and good balance, even at extreme RPM.

W=white, B=blue,

Ref. nr.

Alu. spinners for 3-bladed props ranging from 38mm to 165mm.

Alu. spinners for 2-bladed props ranging from 38mm to 165mm. A series of high precision glass reinforced nylon spinners with aluminium CNC-machined backplate. These spinners are perfectly balanced to avoid any vibration to your model or engine.

D1 M5x0,8 U7/32-32 1/4-28UNF 5/16-24UNF 5/16-24UNF 5/16-24UNF 3/8-24UNF 3/8-24UNF 3/8-24UNF M8x1 M8x1,25 M8x1,25 M8x1,25 M10x1,25 M10x1,25 M10x1,25 M7x1 M7x1 M6x1

D2 M4 M4 M4 M4 M5 M6 M4 M5 M6 M4 M4 M5 M6 M4 M5 M6 M4 M5 M4

2-Blade MA550.38 MA550.44 MA550.51 MA550.57 MA550.63 MA550.70 MA550.76 MA550.82 MA550.89 MA550.95 MA550.102 MA550.114 MA550.127 MA550.140 MA550.152 MA550.165

Description Alu spinner Ø38mm Alu spinner Ø44mm Alu spinner Ø51mm Alu spinner Ø57mm Alu spinner Ø63mm Alu spinner Ø70mm Alu spinner Ø76mm Alu spinner Ø82mm Alu spinner Ø89mm Alu spinner Ø95mm Alu spinner Ø102mm Alu spinner Ø114mm Alu spinner Ø127mm Alu spinner Ø140mm Alu spinner Ø152mm Alu spinner Ø165mm

Ref. nr. Description AK102 Prop & spinner reamer The ideal tool to enlarge the hole in your propeller or spinner perfectly centered. The reamer is divided in 5 sections: 4,5mm - 6,2mm - 7mm - 8mm - 9,5mm. The reamer is made from first-class HSS steel.

3-Blade MA551.38 MA551.44 MA551.51 MA551.57 MA551.63 MA551.70 MA551.76 MA551.82 MA551.89 MA551.95 MA551.102 MA551.114 MA551.127 MA551.140 MA551.152 MA551.165

Ref. nr. MA510

Description Prop balancer

Balance your props and spinner before using them on this friction free balancer. The mandrel will hold all sizes props and spinners. A well balanced prop unit will save your engine bearings and protect your model from vibrations.

92-103cat2009.indd 97

20-01-2009 21:54:58

UNDERCARRIAGES

WHEELS

MA152 Wheel w/ alu rim 25mm, 1pcs

MA153 Wheel w/ alu rim 30mm, 1pcs

MA143 Wheel w/ nylon rim 38mm, 2pcs

MA144 Wheel w/ nylon rim 44mm, 2pcs

MA145 Wheel w/ nylon rim 50mm, 2pcs

MA146 Wheel w/ nylon rim 57mm, 2pcs

MA147 Wheel w/ nylon rim 63mm, 2pcs

MA148 Wheel w/ nylon rim 69mm, 2pcs

MA149 Wheel w/ nylon rim 73mm, 2pcs

MA183 Wheel w/ nylon rim 90mm, 2pcs

MA184 Wheel w/ nylon rim 100mm, 2pcs

MA185 Wheel w/ nylon rim 125mm, 2pcs

PA004 Steerable noseleg .25 size

PA005 Steerable noseleg .40 size

MA156 Undercarriage Ø3,5mm

MA157 Undercarriage Ø4mm

* wheel not included

MA155 Tailwheel assembly small w/ wheel

MA780 Landing gear axle, Ø4mm, 2pcs

MA781 Landing gear axle, Ø5mm, 2pcs

MA782 Landing gear axle, Ø6mm, 2pcs

MA750 Nylon landing gear clamp SMALL, 4pcs

MA751 Nylon landing gear clamp MEDIUM, 4pcs

MA752 Nylon landing gear clamp LARGE, 4pcs

MA753 Nylon landing gear clamp, flat, SMALL, 4pcs

MA754 Nylon landing gear clamp, flat, MEDIUM, 4pcs

MA755 Nylon landing gear clamp, flat, LARGE, 4pcs

MA473 Aluminium wheel collar 2mm w/ hex set screw, 4pcs

MA474 Aluminium wheel collar 2,5mm w/ hex set screw, 4pcs

MA475 Aluminium wheel collar 3mm w/ hex set screw, 4pcs

MA476 Aluminium wheel collar 4mm w/ hex set screw, 4pcs

MA477 Aluminium wheel collar 5mm w/ hex set screw, 4pcs

MA478 Aluminium wheel collar 6mm w/ hex set screw, 4pcs

WHEEL COLLARS

MA151 Wheel w/ alu rim 19mm, 1pcs

92-103cat2009.indd 98

20-01-2009 21:55:11

MA450 Wheel collar 2mm w/ hex set screw, 5pcs

MA448 Wheel collar 2,5mm w/ hex set screw, 5pcs

MA451 Wheel collar 3mm w/ hex set screw, 5pcs

MA452 Wheel collar 4mm w/ hex set screw, 5pcs

MA453 Wheel collar 5mm w/ hex set screw, 5pcs

MA454 Wheel collar 6mm w/ hex set screw, 5pcs

MA740 Wheel cover holder 3mm, 2pcs

MA741 Wheel cover holder 4mm, 2pcs

MA742 Wheel cover holder 5mm, 2pcs

MA743 Wheel cover holder 6mm, 2pcs

MA171 Steering arm Ø3mm, 33mm, 1pc

MA172 Steering arm Ø4mm, 33mm, 1pc

MA680 Steering arm Ø3mm, 16mm, 1pc

MA135 Nylon engine mount .10-.15

MA136 Nylon engine mount .20-.30

MA139 Nylon engine mount .30-.40

MA140 Nylon engine mount .45-.61

MA188 Nylon engine mount .61-.90

MA650 Plastic clevis w/ brass pin MICRO, 2pcs

MA651 Plastic clevis M2 w/ brass pin SMALL, 2pcs

MA652 Plastic clevis M3 w/ brass pin LARGE, 2pcs

MA100 Plastic snap link, 4pcs

MA101 Plastic clevis M2, 4pcs

MA104 Plastic clevis w/ locking screw, for wires up to Ø2mm, 2pcs

MA655 Aluminium clevis heavy duty M3, 2pcs

MA660 Aluminium clevis heavy duty M3, 2pcs

MA661 Aluminium clevis heavy duty M4, 2pcs

MA490.1 Metal clevis M2, 5pcs

MA490 Metal clevis M2, 10pcs

MA491.1 Metal clevis M2,5, 5pcs

ENGINE MOUNTS

MA449 Wheel collar 1,5mm w/ hex set screw, 5pcs

CLEVISES

MA681 Steering arm Ø4mm, 16mm, 1pc

MA654 Aluminium clevis heavy duty M2, 2pcs

92-103cat2009.indd 99

20-01-2009 21:55:54

MA492.1 Metal clevis M3, 5pcs

MA492 Metal clevis M3, 10pcs

MA495 Metal clevis M2 + threaded coupler M2 - Ø2,1mm, 2pcs

MA496 Metal clevis M2,5 + threaded coupler M2,5 - Ø2,3mm, 2pcs

MA497 Metal clevis M3 + threaded coupler M3 - Ø2,8mm, 2pcs

MA498 Metal clevis M2 + threaded coupler M2 for carbon rod Ø3mm, 2pcs

MA485.1 Threaded coupler M2 Ø0,8mm, 5pcs

MA485 Threaded coupler M2 Ø0,8mm, 10pcs

MA480.1 Threaded coupler M2 Ø1,2mm, 5pcs

MA480 Threaded coupler M2 Ø1,2mm, 10pcs

MA481.1 Threaded coupler M2 Ø1,6mm, 5pcs

THREADED COUPLERS

MA491 Metal clevis M2,5, 10pcs

MA499 Metal clevis M3 + threaded coupler M3 for carbon rod Ø3mm, 2pcs

MA482.1 Threaded coupler M2 Ø2,1mm, 5pcs

MA482 Threaded coupler M2 Ø2,1mm, 10pcs

MA483.1 Threaded coupler M2,5 Ø2,3mm, 5pcs

MA483 Threaded coupler M2,5 Ø2,3mm, 10pcs

MA484.1 Threaded coupler M3 Ø2,8mm, 5pcs

MA484 Threaded coupler M3 Ø2,8mm, 10pcs

MA486.1 Threaded coupler M2 for carbon rod Ø3mm, 5pcs

MA486 Threaded coupler M2 for carbon rod Ø3mm, 10pcs

MA487.1 Threaded coupler M3 for carbon rod Ø3mm, 5pcs

MA487 Threaded coupler M3 for carbon rod Ø3mm, 10pcs

MA540 Brass cable coupler M2, 2pcs

MA540.10 Brass cable coupler M2, 10pcs

MA541 Brass cable coupler M3, 2pcs

MA541.10 Brass cable coupler M3, 10pcs

MA765 Solid brass turnbuckles M2,5, 2pcs

MA766 Solid brass turnbuckles M3, 2pcs

MA102 Ball link M2 LARGE, 2pcs

MA103 Ball link M2 SMALL, 2pcs

MA500 Ball link M2 standard, 10pcs

BALL LINKS

MA481 Threaded coupler M2 Ø1,6mm, 10pcs

100

92-103cat2009.indd 100

20-01-2009 21:56:35

MA501 Ball link M3 standard, 10pcs

MA700 Ball link M2 w/ M1,6 screw, 2pcs

MA701 Ball link M2 SHORT w/ M1,6 screw, 2pcs

MA702 Ball link M2 LONG w/ M1,6 screw, 2pcs

MA703 Ball link M2 SHORT, 2pcs

MA704 Ball link M2 LONG, 2pcs

MA705 Ball link M3 SHORT, 2pcs

MA706 Ball link M3 LONG, 2pcs

MA707 Ball link M3 SHORT w/ M3 screw, 2pcs

MA708 Ball link M3 LONG w/ M3 screw, 2pcs

MA709 Aluminium precision ball link M2, 2pcs

MA710 Aluminium precision ball link M2,5, 2pcs

MA711 Aluminium precision ball link M3, 2pcs

MA520 Metal push rod Ø1,7mm w/ M2 thread, 200mm, 5pcs

MA521 Metal push rod Ø2,5mm w/ M2 thread, 200mm, 5pcs

MA522 Metal push rod Ø2,1mm w/ M2,5 thread, 200mm, 5pcs

MA523 Metal push rod Ø2,6mm w/ M3 thread, 200mm, 5pcs

MA530 Steel push rod fully threaded M2, 200mm, 5pcs

PUSH RODS

MA502 Ball link M2,5 standard, 10pcs

MA712 Aluminium precision ball link M4, 2pcs

Plastic push rod with M2 threaded coupler and M2 metal clevis + Ø1mm steel piano wire inside the inner plastic tube.

MA532 Steel push rod fully threaded M3, 200mm, 5pcs

MA760 Tripple rod connector for Ø2mm wires, 1pc

MA761 Tripple rod connector for Ø3mm wires, 1pc

MA685 Carbon push rod Ø3mm w/ M2 metal clevises, 300mm, 1set

CONTROL HORNS

MA531 Steel push rod fully threaded M2,5, 200mm, 5pcs

MA686 Carbon push rod Ø3mm w/ M3 metal clevises, 300mm, 1set

MA691 MA692

MA670 Control horn 8mm MICRO, 1mm holes, 2pcs

MA671 Control horn 19mm SMALL, 1mm holes w/ M2 screws, 2pcs

Plastic push rod set 1m, 2pcs Plastic push rod set 1.5m, 2pcs

PA006 Adjustable push rod connector, 4pcs

MA672 Control horn 19mm SMALL, 1,6mm holes w/ M2 screws, 2pcs

MA673 Heavy duty control horn 34mm, 2,5mm holes w/ M3 screws, 2pcs

101

92-103cat2009.indd 101

20-01-2009 21:57:17

MA114 Control horn 30mm LARGE, 1,6mm holes w/ M2 screws, 2pcs

MA460 Control horn 29mm SMALL, 2,2mm holes w/ TP-screws, 2pcs

MA461 Control horn 34mm LARGE, 1,6mm holes w/ 2.2mm TPscrews, 2pcs

MA462 Control horn reinforced 34mm LARGE, 1,6mm holes w/ 2.2mm TP-screws, 2pcs

MA675 Adjustable control horn heavy duty, 32mm w/ M2 screws, 2pcs

MA676 Adjustable control horn heavy duty, 32mm w/ M2,2 TP-screws, 2pcs

MA170 Aileron linkage, 1pair

MA690 Cable control set complete

MA725 Pin hinge 47mm x Ă&#x2DC;3,5mm, 12pcs

MA720 Pinned hinge 32x14mm, 10pcs

MA471 Pinned hinge 34x17mm, 10pcs

MA472 Pinned hinge 39x20mm, 10pcs

MA722 Flex hinge 7x3,5mm MICRO, 12pcs

MA723 Flex hinge 20x10mm SMALL, 12pcs

MA724 Flex hinge 28x16mm LARGE, 12pcs

MA470 Poly hinge 25x20mm, 12pcs

MA118 Rubber bands 80x6mm, 12pcs

MA119 Rubber bands 100x6mm, 12pcs

MA120 Rubber bands 125x10mm, 8pcs

MA121 Rubber bands 150x10mm, 8pcs

MA122 Rubber bands 180x10mm, 6pcs

MA181 Rubber bands 200x13mm, 6pcs

MA730 Nylon threaded block M4, 2pcs

MA731 Nylon threaded block M5, 2pcs

MA870 Cockpit latch, 1pc

MA873 U-shaped rubber band to contour canopies, motorcowlings, etc., 1m

MA876 Tow release for gliders up to 3,5m, 1pc

MA877 Tow release for gliders up to 7m, 1pc

TOW RELEASE

CANOPY ACC. MA732 Nylon threaded block M6, 2pcs

WING MOUNTS

RUBBER BANDS

HINGES

MA113 Control horn 22mm SMALL, 1,6mm holes w/ M2 screws, 2pcs

102

92-103cat2009.indd 102

20-01-2009 21:58:53

All the Pilot busts are painted and finished.

AT006 Bust REGGY 1/4 110x120mm

AT007 Bust MIKE/JET 1/4 155x133mm

AT008 Bust PHILIP 1/4 145x117mm

AT009 Bust RONNY 1/5 185x110mm

AT010 Bust ERIC 1/5 105x101mm

AT011 Bust WERNER 1/5 100x100mm

AT012 Bust EVA 1/5 135x97mm

AT013 Bust CASCADEUR 1/6 85x70mm

AT014 Bust PIRATE 1/6 90x71mm

AT015 Bust BLERIOT 1/6 135x100mm

AT017 Bust NADIA 1/6 80x70mm

AT019 Bust LOUIS 1/6 92x73mm

AT020 Bust ANN 1/6 93x68mm

AT021 Bust PIETER/JET 1/6 77x73mm

AT022 Bust GRAND GUERRE 1/6 80x72mm

AT023 Bust PIERRE 1/6 66x73mm

AT024 Bust GUYNEMER 1/6 78x78mm

AT025 Bust PETER 1/6 60x71mm

AT026 Bust LESTER 1/6 63x71mm

AT027 Bust LUC 1/7 62x60mm

AT028 Bust EMIL 1/8 45x53mm

AT029 Bust NORBERT 1/8 45x53mm

AT030 Bust SERGE 1/8 45x53mm

AT031 Bust JAN/JEAN 1/8 45x53mm

AT032 Bust TOM/JET 1/8 46x54mm

AT050 Bust MARC 1/4 105x105mm

AT051 Bust DENNIS 1/4 120x120mm

AT052 Bust CAPTAIN 1/4 145x134mm

AT053 Bust CO-PILOT 1/4 130x140mm

AT054 Bust NAVIGATOR 1/4 136x140mm

AT055 Bust WEEKEND 1/4 130x135mm

AT060 Bust DENNIS 1/5 95x93mm

AT061 Bust CAPTAIN 1/5 118x116mm

AT062 Bust CO-PILOT 1/5 102x110mm

AT063 Bust NAVIGATOR 1/5 114x108mm

AT064 Bust WEEKEND 1/5 105x105mm

AT070 Bust DENNIS 1/6 75x75mm

AT071 Bust MAT/JET 1/6 75x68mm

AT072 Bust CAPTAIN 1/6 85x80mm

AT073 Bust CO-PILOT 1/6 82x78mm

AT074 Bust NAVIGATOR 1/6 85x81mm

AT075 Bust WEEKEND 1/6 90x86mm

AT076 Bust SPORTMAN 1/6 90x80mm

103

92-103cat2009.indd 103

20-01-2009 21:59:36

DURAFLEX COUPLINGS These couplings are available in a wide range of sizes to suit almost all applications. You can make up your own coupling by choosing two brass inserts that suit the shaft to be joined, then push them into a coupling unit to form the complete unit. These couplings are suitable for electric and IC powered drive units and accept a drive angle up to 15째. All coupling inserts with set screw fitting are supplied with a 1,5mm hex key. MA200 Plastic coupling unit, 1pc

MA201 Plain bore insert for 2mm shaft, 1pc

MA202 Plain bore insert for 2,3mm shaft, 1pc

MA203 Plain bore insert for 3mm shaft, 1pc

MA208 Coupling insert w/ M4 thread, 1pc

MA204 Plain bore insert for 3,2mm shaft, 1pc

MA205 Plain bore insert for 4mm shaft, 1pc

MA206 Plain bore insert for 5mm shaft, 1pc

MA207 Plain bore insert for 6mm shaft, 1pc

MA214 Coupling insert w/ M3 thread, 1pc

MA209 Coupling insert w/ M5 thread, 1pc

MA210 Coupling insert w/ M6 thread, 1pc

MA211 Coupling insert w/ 1/4-28UNF thread, 1pc

MA212 Double convertor, 1pc

MA175 Boat aerials, 1pc

MA220 Rudder micro 20x32mm, 1pc

MA221 Rudder mini 25x40mm, 1pc

MA222 Rudder small 30x45mm, 1pc

MA223 Rudder medium 35x53mm, 1pc

MA224 Rudder large 40x60mm, 1pc

MA225 Rudder X-large 45x68mm, 1pc

BOAT RUDDERS Shiny brass rudder blades with brass rudder posts sleeved with a threaded glass filled nylon bearing tube. All brass nuts and retaining washers supplied, together with a strong, glass filled nylon tiller arm. Available in 6 sizes to suit a wide variety of applications.

104

104-112cat2009.indd 104

20-01-2009 22:47:06

Ref. nr. MA1300 MA1301 MA1302 MA1303 MA1304 MA1305 MA1306 MA1307

Description Rubber shock mount, 2pcs Rubber shock mount, 2pcs Rubber shock mount, 2pcs Rubber shock mount, 2pcs Rubber shock mount, 2pcs Rubber shock mount, 2pcs Rubber shock mount, 2pcs Rubber shock mount, 2pcs

D1 M3 M4 M4 M4 M5 M5 M6 M6

D2 8mm 10mm 10mm 15mm 15mm 15mm 20mm 20mm

L1 6mm 10mm 10mm 15mm 15mm 15mm 15mm 15mm

L2 8mm 10mm 15mm 15mm 15mm 20mm 20mm 15mm

Hardness 55°shore 55°shore 55°shore 55°shore 55°shore 55°shore 55°shore 55°shore

MA1310 Rubber shock mount M3, 2pcs Ref. nr. MA1310 MA1311 MA1312 MA1313 MA1314 MA1315 MA1316 MA1317 MA1318

D1 M3 M4 M4 M4 M5 M5 M6 M6 M6

D2 8mm 10mm 10mm 15mm 15mm 15mm 20mm 20mm 25mm

D3 M3 M4 M4 M4 M5 M5 M6 M6 M6

L1 6mm 10mm 10mm 15mm 15mm 15mm 15mm 15mm 15mm

L2 Hardness 8mm 55°shore 10mm 55°shore 15mm 55°shore 15mm 55°shore 15mm 55°shore 20mm 55°shore 20mm 55°shore 15mm 55°shore 30mm 55°shore

MA1300 Rubber shock mount M3, 2pcs

MA1301 Rubber shock mount M4, 2pcs

MA1302 Rubber shock mount M4, 2pcs

MA1303 Rubber shock mount M4, 2pcs

MA1304 Rubber shock mount M5, 2pcs

MA1305 Rubber shock mount M5, 2pcs

MA1306 Rubber shock mount M6, 2pcs

MA1307 Rubber shock mount M6, 2pcs

MA1311 Rubber shock mount M4, 2pcs

MA1312 Rubber shock mount M4, 2pcs

MA1313 Rubber shock mount M4, 2pcs

MA1314 Rubber shock mount M5, 2pcs

MA1315 Rubber shock mount M5, 2pcs

MA1316 Rubber shock mount M6, 2pcs

MA1317 Rubber shock mount M6, 2pcs

MA1318 Rubber shock mount M6, 2pcs

Ref. nr. Description MA1330 Rubber shock mount MA1331 Rubber shock mount MA1332 Rubber shock mount

MA1330 Rubber shock mount M4, 4pcs

MA1331 Rubber shock mount M5, 4pcs

MA1332 Rubber shock mount M6, 4pcs

D1 D2 L1 L2 M4 8mm 1,4mm 8mm M5 10mm 0,9mm 10mm M6 13mm 1,3mm 10mm

Hardness 55°shore 55°shore 55°shore

Finally an easy solution to lower the noise and vibration of your model. These rubber shock mounts can be easily installed using a standard motor mount. Just enlarge the holes in the firewall , slide the rubber shock mount in place and reattach the motor mount. Can be used for engines from 2,5cc up to 100cc.

105

104-112cat2009.indd 105

20-01-2009 22:47:30

Ref. nr.

Ref. nr. MA2180 MA2181 MA2182 MA2183 MA2184 MA2185 MA2186 MA2187 MA2188 MA2189 MA2190 MA2191 MA2192 MA2193 MA2194 MA2195 MA2196 MA2197 MA2198 MA2199 MA2200 MA2201

Description (packed 10pcs) Countersunk socket head screw M3x6 Countersunk socket head screw M3x8 Countersunk socket head screw M3x10 Countersunk socket head screw M3x12 Countersunk socket head screw M3x16 Countersunk socket head screw M3x20 Countersunk socket head screw M3x25 Countersunk socket head screw M3x30 Countersunk socket head screw M4x10 Countersunk socket head screw M4x12 Countersunk socket head screw M4x16 Countersunk socket head screw M4x20 Countersunk socket head screw M4x25 Countersunk socket head screw M4x30 Countersunk socket head screw M4x35 Countersunk socket head screw M4x40 Countersunk socket head screw M5x10 Countersunk socket head screw M5x16 Countersunk socket head screw M5x20 Countersunk socket head screw M5x25 Countersunk socket head screw M5x30 Countersunk socket head screw M5x40

MA2060 MA2061 MA2062 MA2063 MA2064 MA2065 MA2066 MA2067 MA2068 MA2069 MA2070 MA2071 MA2072 MA2073 MA2074 MA2075 MA2076 MA2077 MA2078 MA2079 MA2080 MA2081 MA2082 MA2083 MA2084 MA2085 MA2086 MA2087 MA2088 MA2089 MA2090 MA2091 MA2092

Description (packed 10pcs) Socket head screw M2x5 Socket head screw M2x8 Socket head screw M2x12 Socket head screw M2,5x12 Socket head screw M2,5x20 Socket head screw M3x6 Socket head screw M3x8 Socket head screw M3x10 Socket head screw M3x12 Socket head screw M3x16 Socket head screw M3x20 Socket head screw M3x25 Socket head screw M3x30 Socket head screw M4x10 Socket head screw M4x12 Socket head screw M4x16 Socket head screw M4x20 Socket head screw M4x30 Socket head screw M4x35 Socket head screw M4x40 Socket head screw M5x10 Socket head screw M5x16 Socket head screw M5x20 Socket head screw M5x25 Socket head screw M5x30 Socket head screw M5x40 Socket head screw M6x10 Socket head screw M6x16 Socket head screw M6x20 Socket head screw M6x25 Socket head screw M6x30 Socket head screw M6x35 Socket head screw M6x45

Ref. nr. MA2020 MA2021 MA2022 MA2023 MA2024 MA2025 MA2026 MA2027 MA2028 MA2029 MA2030

Description (packed 10pcs) Pan head screw M1,6x6 Pan head screw M1,6x8 Pan head screw M1,6x12 Pan head screw M2x6 Pan head screw M2x8 Pan head screw M2x12 Pan head screw M2x20 Pan head screw M2,5x8 Pan head screw M2,5x12 Pan head screw M2,5x16 Pan head screw M2,5x20

Ref. nr.

Description (packed 10pcs)

MA2260 Countersunk screw M3x6 MA2261 Countersunk screw M3x8 MA2262 Countersunk screw M3x10 MA2263 Countersunk screw M3x12 MA2264 Countersunk screw M3x16 MA2265 Countersunk screw M3x20 MA2267 Countersunk screw M3x30 MA2268 Countersunk screw M4x10 MA2269 Countersunk screw M4x12 MA2270 Countersunk screw M4x16 MA2271 Countersunk screw M4x20 MA2272 Countersunk screw M4x25 MA2273 Countersunk screw M4x30

Ref. nr. MA2031 MA2032 MA2033 MA2034 MA2035 MA2036 MA2037 MA2038 MA2039 MA2040 MA2041 MA2042

Description (packed 10pcs) Pan head screw M3x8 Pan head screw M3x12 Pan head screw M3x16 Pan head screw M3x20 Pan head screw M3x25 Pan head screw M3x30 Pan head screw M4x10 Pan head screw M4x12 Pan head screw M4x16 Pan head screw M4x20 Pan head screw M4x25 Pan head screw M4x30

Ref. nr. MA2120 MA2121 MA2122 MA2123 MA2124 MA2125 MA2126 MA2127

Description (packed 10pcs) E-clips 1,5mm E-clips 1,9mm E-clips 2,3mm E-clips 3,2mm E-clips 4mm E-clips 5mm E-clips 6mm E-clips 7mm

106

104-112cat2009.indd 106

20-01-2009 22:47:46

Ref. nr. MA2210 MA2211 MA2212 MA2213 MA2215 MA2216 MA2217 MA2218 MA2219 MA2220 MA2221 MA2222 MA2223 MA2224 MA2225

Description (packed 10pcs) Pan head TP-screw 2,2x6.5 Pan head TP-screw 2,2x9.5 Pan head TP-screw 2,9x6.5 Pan head TP-screw 2,9x9.5 Pan head TP-screw 2,9x13 Pan head TP-screw 2,9x16 Pan head TP-screw 2,9x19 Pan head TP-screw 3,5x13 Pan head TP-screw 3,5x16 Pan head TP-screw 3,5x25 Pan head TP-screw 3,5x32 Pan head TP-screw 4,2x13 Pan head TP-screw 4,2x16 Pan head TP-screw 4,2x19 Pan head TP-screw 4,2x25

Ref. nr.

Description (packed 10pcs)

Ref. nr.

MA2240 MA2241 MA2242 MA2243 MA2244 MA2245 MA2246 MA2247 MA2248 MA2249 MA2250 MA2251 MA2252

Countersunk TP-screw 2,9x6.5 Countersunk TP-screw 2,9x9.5 Countersunk TP-screw 2,9x13 Countersunk TP-screw 2,9x16 Countersunk TP-screw 2,9x25 Countersunk TP-screw 3,9x13 Countersunk TP-screw 3,9x16 Countersunk TP-screw 3,9x19 Countersunk TP-screw 4,2x13 Countersunk TP-screw 4,2x16 Countersunk TP-screw 4,2x22 Countersunk TP-screw 4,2x25 Countersunk TP-screw 4,2x32

MA2000 MA2001 MA2002 MA2003 MA2004 MA2005

Description (packed 10pcs) Hexagonal nut M1,6 Hexagonal nut M2 Hexagonal nut M2,5 Hexagonal nut M3 Hexagonal nut M4 Hexagonal nut M5

Ref. nr. MA2010 MA2011 MA2012 MA2013 MA2014

Ref. nr. Ref. nr.

Description (packed 4pcs)

MA2130 Hex blind nuts M3 MA2131 Hex blind nuts M4

Ref. nr. Ref. nr. MA2050 MA2051 MA2052 MA2053 MA2054 MA2055 MA2056 MA2057 MA2058

Description (packed 10pcs) Set screw M3x3 Set screw M3x5 Set screw M4x4 Set screw M4x6 Set screw M4x10 Set screw M4x16 Set screw M5x5 Set screw M5x10 Set screw M5x20

MA2140 MA2141 MA2142 MA2143

Description (packed 10pcs) Nylstop nut M2 Nylstop nut M3 Nylstop nut M4 Nylstop nut M5 Nylstop nut M6

Ref. nr.

Description (packed 10pcs)

PL200 PL201 PL202 PL203 PL204 PL205 PL206 PL207

Cable tie 2,5x102mm, 10pcs Cable tie 2,5x200mm, 10pcs Cable tie 3,5x145mm, 10pcs Cable tie 3,5x215mm, 10pcs Cable tie 4,7x160mm, 10pcs Cable tie 4,7x200mm, 10pcs Cable tie 4,7x285mm, 10pcs Cable tie 4,7x360mm, 10pcs

Ref. nr.

Description (packed 5pcs)

Description (packed 4pcs) Blind nuts M3 Blind nuts M4 Blind nuts M5 Blind nuts M6

T51.061 Quick release cable ties 7x290mm, 5pcs

Description (packed 4pcs)

MA2160 Nylon bolt M4x20 MA2161 Nylon bolt M5x30 MA2162 Nylon bolt M6x40

Ref. nr.

Description (packed 10pcs)

PA007 Body clips 1/8 scale PA008 Body clips 1/10 scale

Ref. nr.

Description (packed 10pcs)

MA2280 MA2281 MA2282 MA2283 MA2285 MA2286 MA2287 MA2288

Shim ring steel 4x8x0,3mm Shim ring steel 5x10x0,3mm Shim ring steel 6x12x0,3mm Shim ring steel 8x14x0,3mm Shim ring steel 4x8x0,5mm Shim ring steel 5x10x0,5mm Shim ring steel 6x12x0,5mm Shim ring steel 8x14x0,5mm

Ref. nr. MA2101 MA2102 MA2103 MA2104 MA2105 MA2106 MA2107

Description (packed 10pcs) Flat washers 2,2x5mm Flat washers 2,7x6mm Flat washers 3,2x7mm Flat washers 4,3x9mm Flat washers 5,3x10mm Flat washers 6,4x12mm Flat washers 8,4x16mm

107

104-112cat2009.indd 107

20-01-2009 22:47:54

R/C PROFI TOOLS A superb range of professional R/C tools for the demanding modeller. The ergonomic shape of the 7075 T-6 aluminium hollow handle guarantees a perfect grip. All tips are made of special hardened steel for long life and to prevent damage to the screw heads. Special attention is given to the length of the tools, so that even difficult places are accessible. PT115 Hex wrench 1,5mm

PT120 Hex wrench 2,0mm

PT125 Hex wrench 2,5mm

PT130 Hex wrench 3,0mm

PT140 Hex wrench 4,0mm

PT150 Hex wrench 5,0mm

PT330 Flat screwdriver 3,0mm

PT340 Flat screwdriver 4,0mm

PT350 Flat screwdriver 5,0mm

PT430 Phillips screwdriver 3,0mm

PT440 Phillips screwdriver 4,0mm

PT450 Phillips screwdriver 5,0mm

PT458 Phillips screwdriver 5,8mm

PT245 Socket driver 4,5mm

PT250 Socket driver 5,0mm

PT255 Socket driver 5,5mm

PT260 Socket driver 6,0mm

PT270 Socket driver 7,0mm

PT280 Socket driver 8,0mm

108

104-112cat2009.indd 108

20-01-2009 22:48:07

PT400 Phillips screwdriver set, 4pcs (3mm; 4mm; 5mm; 5,8mm)

PT100 Hex wrench set, 4pcs (1,5mm; 2mm; 2,5mm; 3mm)

109

104-112cat2009.indd 109

20-01-2009 22:48:39

T0165 Sealing iron

T0166 Fine sealing iron

T0165.UK Sealing iron UK

T0166.UK Fine sealing iron UK

The automatic sealing iron is the tool you need for a perfect covering job. The temperature of this sealing iron is adjustable for all films on the market. The temperature is controlled automatically within a range of ±2°C.

This is the tool a lot of modellers were waiting for. The fine sealing iron will reach any place on your model. The temperature can be switched from high to low. Round & flat iron shoe included.

• The iron shoe is custom designed to reach all difficult spots. • The shoe is Teflon coated for a smooth covering.

• Optimum shaped flat and round trim shoe. • Trim shoes are coated with non-scratch Teflon.

T0164 Z-bender

For easy bending of conrol rod ends to fit servoarms. Hardened steel jaws.

AK102 Propeller & spinner reamer The ideal tool to enlarge the hole in your propeller or spinner, perfectly centered. The reamer is divided in 5 sections: 4,5 mm - 6,2 mm - 7 mm - 8 mm - 9,5 mm. The reamer is made of first class HSS steel.

AK101 Knife edge reamer The ideal tool to make perfect lyround holes in any kind of plastic material. To drill or enlarge holes from 3 mm to 14 mm. The reamer is made from of class HSS steel.

AK100 Curved scissors Purposely designed curved scissors to cut all plastic materials, especially polycarbonate. The curved angle will help you to cut smooth curves for wheels, etc ... The scissors are made of hardened steel and will cut up to 2 mm thick polycarbonate.

110

104-112cat2009.indd 110

20-01-2009 22:48:47

PROTECH CA GLUES

A105-25 CA glue 105 THIN, 25g

A105-50 CA glue 105 THIN, 50g

A120-25 CA glue 120 MEDIUM, 25g

A120-50 CA glue 120 MEDIUM, 50g

A180-25 CA glue 180 THICK, 25g

A180-50 CA glue 180 THICK, 50g

Silicon oils for shock absorbers & differentials A range of high quality silicon oils. The advantage of silicon oil is the constant viscosity under different temperatures. The higher the number, the thicker the viscosity. Silicon oils from 100 to 2500 cps are used in shock absorbers and from 2500 to 100000 cps can be used in differentials.

SOFT

Silicon differential oil

HARD MEDIUM

THIN

SL450 Silicon oil 450 cps, 50ml SL500 Silicon oil 500 cps, 50ml SL600 Silicon oil 600 cps, 50ml SL700 Silicon oil 700 cps, 50ml SL800 Silicon oil 800 cps, 50ml SL900 Silicon oil 900 cps, 50ml SL1000 Silicon oil 1000 cps, 50ml

THICK

MEDIUM

THIN

SL100 Silicon oil 100 cps, 50ml SL150 Silicon oil 150 cps, 50ml SL200 Silicon oil 200 cps, 50ml SL250 Silicon oil 250 cps, 50ml SL300 Silicon oil 300 cps, 50ml SL350 Silicon oil 350 cps, 50ml SL400 Silicon oil 400 cps, 50ml

SL2500 Silicon oil 2500 cps, 50ml SL5000 Silicon oil 5000 cps, 50ml SL10000 Silicon oil 10000 cps, 50ml SL30000 Silicon oil 30000 cps, 50ml SL50000 Silicon oil 50000 cps, 50ml SL100000 Silicon oil 100000 cps, 50ml

A601 Stud lock, 15g

A600 Nut lock, 15g

Use stud lock on all nuts & bolts which may never become loose anymore.

Use nut lock on all nuts & bolts which need to be protected from vibrations, but still need to loosened easely.

LX906 Air filter oil, 50ml Special oil for foam filters only. The oil is applied on the foam filter by squeezing the foam and the oil becomes sticky to provide optimal dust filtering.

SL001 High speed grease, 250g Special sticky grease for differentials, gears and ball bearings. Water repellent.

A500-28 5-min epoxy glue, 28g

111

104-112cat2009.indd 111

20-01-2009 22:48:55

This catalog is an edition of PROTECH速, Geelseweg 80, B-2250 OLEN (Belgium). This catalog is protected by a copyright and nothing from this edition may be reproduced or used without any prior written authorisation. Whilst every effort has been made to ensure the accuracy of the information in this catalog, errors do creep in and PROTECH速 can accept no responsibility for failures, wrong specifications, accuracy of colours, losses or damages caused. PROTECH速 denies any responsability claims or damages caused by use of our products. PROTECH速 is not responsable for product changes or availability of our products. The products of dangerous nature included in this catalog are submissive to special handling and storage specifications. Please check with your local authorities for existing legislation.

104-112cat2009.indd 112

20-01-2009 22:49:22