Afr o Pr o Au d i o i s p r ou d to p r esen t i ts d i sti n gu i sh ed u ser s a d i sti n c ti ve p r od u c t gr ou p p r ep ar ed wi th an amassed
20 years of passion an d R& D, as wel l as i ts ex p er i en c e as a top -n otc h gl ob al b r an d .
Afro Pro Audio products are crafted by an expert staff on factory premises incorporating the most advanced electronics, mechanical devices, woodcrafting lathes and software, covering an enclosed space of 3772 m2, and an outdoor area of 2744 m2.
Designed by its experienced CAD team, wood and metal models are processed using laser and gouging technology.
QDS 13
Frequency response THD+N S/N rate Damping factor
The Wick
20Hz-20KHz (+0/-1.5dB) <0.05% >80dB >800
Crosstalk
>60dB
Slow rate
>10V / s
Input sensitivity
0.775V/1V/1.4V/38dB/32dB/26dB
Input impedance
0kΩ / 10kΩ (bal/unbal)
Voltage gain (8Ω)
40.2dB
Output circuitry Cooing Analog Input Signal Maximum Input Level Analog Output Signal Maximum Output Level Digital Processing
Class I Air ventilation from front to rear and fixed venue installations. ChA/ChB/ChC/ChD +20dBu Ch1/Ch2/Ch3/Ch4/Ch5/Ch6/Ch7/Ch8 +20dBu 2xSAM3716, 24bits (data) x 96 bits (coeff.)
A/D Converters
AKM5388, 24 bits
D/A Converters
4xAKM4396, 24 bits
Sampling Frequency S/PDIF Stereo Digital In S/N THD+N Power SupplyDigital In Remote Control 8Ω Stereo 4Ω Stereo 2Ω Stereo
48kHz 32kHz, 44.1kHz and 48kHz sources accepted 110dB 0.005% Switching Power Supply USB, RS485, TCP/IP 1300Wx4 2100Wx4 2500Wx4
Application The QDS-13 high-power amplifier element is designed to enhance high-quality music and speech in a wide array of applications, including concert audio and corporate A/V presentations of all types of mobile users.
Ciwi
TEAM
Ciwi
• High power and ultra-compact, clarity and precision • Compact and portable
D w a r f ’ s Te r r o r
• Passive 2-way enclosure • FOH, stage monitor, front-fills, under-balcony fills, fix installation versatility for reduced inventory • Microphone stand or U-Bracket mount • Boost your performance with the CIWI system, our most advanced portable amplification system for musicians, DJs and public speakers. The loudspeaker delivers 90° of horizontal sound coverage and our smoothest tonal balance - across the stage and throughout the room.
Usable bandwidth (-10 dB) Nominal directivity (-6dB) Maximum SPL
90 Hz – 20 kHz 110° Axi-symmetric 119 dB
Components
LF: 1 x 5” HF: 1 x 1” Nominal impedance: LF = 16 ohms, HF = 16 ohms
Physical data
W x H/h x D
160 x 160 x 160 mm
Weight (net)
3.5 kg
Connectors
2 x Speakon® 230 v (sub)
Cabinet
Baltic birch plywood
Finish
Standart 6009 poluyrea coating White and architectural RAL color available
Front
Polyester powder-coated steel grill, acoustically neutral fabric
Rigging
Steel with double-coated zinc and polyester powder
Application The CIWI is a complete personal sound system designed for musicians who demand an all-in-one easy portable PA package. Applications for this product include acoustic performers, music and speech reinforcement, a portable AV, stage monitoring, front-fills, under-balcony fills as a main stereo PA system for an event. The AC Rack and the QDS-13 Power amplified controller preset library delivers an extremely advanced and precise drive system for CIWI.
Ciwi
Line
Skyscraper
• High power and sonic performance, clarity and precision • ‘Plug and play’ design for fast and easy set-up • A self - powered complete system. • Compact and portable • FOH, fill, stage monitor, fix installition versatility for reduced inventory • Boost your performance with the CIWI system, our most advanced portable amplification system for musicians, DJ’s and MC’s. The loudspeaker delivers 90° of horizontal sound coverage and our smoothest tonal balance—across the stage and throughout the room. Includes a CIWI SUB bass module for more flexibility and even greater punch at the low end. • Ciwi sub amplifiers feeds four ciwi mid-high elements, stereo.
Usable bandwidth (-10 dB) Nominal directivity (-6dB) Maximum SPL
100 Hz – 20 kHz 90° Horizontal 10° Vertical 118 dB
Components
MF-HF: 8 x 4”
Physical data
Mid-Hi: W x H/h x D
1000 x 130 x 130 mm
Weight (net)
12 kg
Connectors
2 x 4-point Speakon® Out
Cabinet
Baltic birch plywood
Finish
RAL 6006 Grey-Black
Front
Polyester powder-coated steel grill, acoustically neutral fabric
Rigging
Steel with double-coated zinc and polyester powder
Application The CIWI is a completely personal sound system designed for musicians who demand an all-in-one conveniently portable PA package. Applications for this unit include acoustic performers, music and voice reinforcement, a portable AV, stage monitoring, front fill, and as a main stereo event PA system whenever doubled-up.
Ciwi Sub
• High power and sonic performance, clarity and precision • ‘Plug In and Play’ design for fast and easy set-up • A self-powered complete system
Big Foot
• Compact and portable • FOH, fill, stage monitor, fix installition versatility for reduced inventory • Boost your performance with the CIWI system, our most advanced portable amplification system for musicians, DJ’s and MC’s. The loudspeaker delivers 90° of horizontal sound coverage and our smoothest tone balance - across the stage and throughout the room. Includes a CIWI SUB bass module for more flexibility and even greater punch at the low end.
Usable bandwidth (-10 dB) Maximum SPL Amplifiers
(-10dB) 40 Hz – 20 kHz 120 dB Sub: 1 x 750 W 4 ohms Mid-high: 1 x 750 W 4 ohms
Components
LF: 1 x 12”
Physical data
Sub: W x H/h x D
350 x 357 x 450 mm
Weight (net)
22 kg
Connectors
2 x 4-point Speakon® Out 1 x Powercon® 230 v (sub)
Connectors
2 x XLR in parallel
Cabinet
Baltic birch plywood
Finish
RAL 6006 Grey-Black
Features
Front
Polyester powder-coated steel grill, acoustically neutral fabric
Rigging
Steel with dual coating zinc and polyester powder
The CIWI SUB is a rugged, lightweight enclosure, housing a 12” woofer. It can be deployed either as an FOH system or else as a compact distributed sub-bass solution for delays and fills thanks to total integrity with CIWI Line Array elements. All applications are up and running with a quick set-up.
Application The CIWI SUB bass cabinet is designed to boost high-quality reinforcement of music and speech in a wide range of applications, including concert audio and corporate A/V presentations of all types for both portable users and fixed venue installations.
Axi
TEAM
Axi - IN
• Intelligent DC technology affords the flexibility of lengthy cable runs without conduits • Extraordinary fidelity and power capability in an ultracompact package
Close Fighter
• 70º conical dispersion Hf driver delivers a smooth high-frequency response • Wide, symmetrical pattern covers a broad listening area • Unique crossover design eliminates combing and yields a consistent midrange response • Exceptional SPL to size ratio
Usable bandwidth (-10 dB) Nominal directivity (-6dB) Maximum SPL RMS handling capacity
75 Hz – 20 kHz 90° Axi-symmetric
Application
127 dB LF: 300 W HF: 80 W
• Frontfill and under-balcony fill coverage • Theatrical sound reinforcement • Portable and installed AV systems • Houses of worship • Compact voice reinforcement systems
Components
LF: 2 x 5” HF: 1 x 1.75” Nominal impedance: LF = 8 ohms, HF = 8 ohms
Physical data
W x H/h x D
354 x 167 x 231 mm
Weight (net)
8 kg
Connectors
2 x PowerconR 230 V 2 x XLR in parallel
The AXI IN is an enclosure containing a self powered coaxial configuration featuring a 1.75’’ diaphragm compression driver loaded onto a 2x5’’ low-frequency transducer integrated into a compact low-profile bass-reflex tuned enclosure. Advanced components provide a high power-to-weight ratio.
Cabinet
Baltic birch plywood
AXI’s compact size and low weight complies with rigging and visual limitations.
Finish
RAL 6009 Grey-Black polyurea coating
Front
Polyester powder-coated steel grill, acoustically neutral fabric
AXI can be deployed either as an FOH system or as a compact distributed solution for delays and fills, stage monitoring. All applications are up and running in a remarkably short time.
Rigging
Steel with double-coated zinc and polyester powder
Features
Axi - S
• High power and sonic performance, clarity and precision • ‘Plug In and Play’ design for fast and easy set-up • Tight coverage pattern and exceptional feedback immunity
Support Band
• Ultimate sonic performance, clarity and precision • Compact and portable • FOH, fill, stage monitor versatility for reduced inventory
Usable bandwidth (-10 dB) Nominal directivity (-6dB) Maximum SPL RMS handling capacity
60 Hz – 20 kHz 90° Axi-symmetric
Application
126 dB LF: 400 W HF: 125 W
Components
LF: 1 x 8” HF: 1 x 1.5” Nominal impedance: LF = 8 ohms, HF = 8 ohms
Physical data
W x H/h x D
238 x 280 x 263,5 mm
Weight (net)
11 kg
Connectors
2 x 4-point Speakon®
Cabinet
Baltic birch plywood
Finish
RAL 6006 Grey-Black / ops. colour
Front
Polyester powder-coated steel grill, acoustically neutral fabric
Rigging
Steel with double-coated zinc and polyester powder
The AXI is a self - powered co-axial speaker designed to provide a high- quality reinforcement of music and voice for a wide range of applications including concert audio and corporate A/V presentations of all types for both portable users and fixed venue installations. The enclosure operates over a bandwidth ranging from 60 Hz to 20 kHz, which can be reduced to 27 Hz with the addition of recommended AXI-Sub, MIO or NUA subwoofers. Features The AXI is an enclosure containing a passive coaxial configuration featuring a 1.5’’ diaphragm compression driver loaded onto a 8’’ low-frequency transducer integrated into a compact low-profile bass-reflex tuned enclosure. Advanced components provide a high power-to-weight ratio. AXI’s compact size and low weight complies with rigging and visual limitations. AXI can be deployed either as an FOH system or as a compact distributed solution for delays and fills, stage monitoring. All applications are up and running in a remarkably short time. Both the AC Rack and the QDS-13 Power amplified controller preset library deliver an extremely advanced and precise drive system for ARYO.
Axi - M
• High power and sonic performance, clarity and precision • ‘Plug in and Play’ design for fast & convenient set-up • Self - Powered
Volume Up
• Tight coverage pattern and exceptional feedback immunity • Ultimate sonic performance, clarity and precision • Compact and portable • FOH, fill, stage monitor versatility for reduced inventory Usable bandwidth (-10 dB) Nominal directivity (-6dB) Maximum SPL RMS handling capacity
45 Hz – 20 kHz 90° Axi-symmetric 131 dB
Application
LF: 450 W HF: 125 W
Components
LF: 1 x 12” neo HF: 1 x 3 neo Nominal impedance: LF = 8 ohms, HF = 8 ohms
Physical data
W x H/h x D
369,5 x 541 x 450 mm
The AXI-M is a self-powered coaxial speaker designed to provide a high-quality reinforcement of music and voice in a wide array of applications including concert audio and corporate A/V presentations of all types for both portable users and fixed venue installations. The enclosure operates over a frequency bandwidth from 45 Hz to 20 kHz which can be dropped to 27 Hz with the addition of recommended MIO or NUA subwoofers.
Weight (net)
23 kg
Features
Connectors
2 x 4-point Speakon® 2 x Powercon® 230 v
Connectors
2 x XLR in parallel DSP Lcd screen controller
The AXI-M is an enclosure with a passive co-axial configuration featuring a 3’’ diaphragm compression driver loaded onto a 12’’ low frequency transducer integrated into a compact low profile bass-reflex tuned enclosure. Advanced components provide a high power-to-weight ratio.
Cabinet
Baltic birch plywood
Finish
RAL 6006 Grey-Black
Front
Polyester powder-coated steel grill, acoustically neutral fabric
Rigging
Steel with double-coated zinc and polyester powder
AXI-M’s compact size and low weight offers a solution to your rigging and visual limitations. AXI-M can be deployed either as an FOH system or as a compact distributed solution for delays and fills, stage monitoring. All applications are up and running in a remarkably short time. The AXI Series features a speaker management DSP and a double-channel power amp module. The DSP manages system crossover network, driver time calibration, and dual protection of loudspeaker components.
Axi - L
• High power and sonic performance, clarity and precision • ‘Plug In and Play’ design for fast and convenient set-up • Self - Powered
Headliner
• Tight coverage pattern and exceptional feedback immunity • Ultimate sonic performance, clarity and precision • Compact and portable • FOH, fill, stage monitor versatility for reduced inventory
Usable bandwidth (-10 dB) Nominal directivity (-6dB) Maximum SPL RMS handling capacity
35 Hz – 20 kHz 60° Axi-symmetric 136 dB
Application
LF: 600 W HF: 140 W
The AXI-X is a self-powered co-axial speaker designed to provide high-quality reinforcement of music and voice over a wide array of applications, including concert audio and corporate A/V presentations of all types for both portable users and fixed venue installations. The enclosure operates over a bandwidth between 35 Hz to 20 kHz, which can be reduced to 27 Hz with the addition of recommended MIO or NUA subwoofers.
Components
LF: 1 x 15” HF: 1 x 4” Nominal impedance: LF = 8 ohms, HF = 8 ohms
Physical data
W x H/h x D
369,5 x 541 x 450 mm
Weight (net)
29 kg
Connectors
2 x Powercon® 230 v
Connectors
2 x XLR in parallel DSP Lcd screen controller
Material
Baltic birch plywood
Finish
RAL 6006 Grey-Black
Front
Polyester powder-coated steel grill, acoustically neutral fabric
Rigging
Steel with double-coated zinc and polyester powder
Features The AXI-X is an enclosure incorporating a passive coaxial configuration that features a 3’’ diaphragm compression driver loaded onto a 15’’ low-frequency transducer integrated into a compact low-profile bass-reflex tuned enclosure. Advanced components provide a high power-to-weight ratio. The compact size and low weight of AXI-X offers a solution to your rigging and visual limitations. AXI-X can be deployed either as an FOH system or as a compact distributed solution for delays and fills, stage monitoring. All applications are up and running with an remarkably quick set-up. The AXI Series features a speaker management DSP and a double channel power amp module. The DSP manages the system crossover network, driver time alignment and dual-protection of loudspeaker components.
Axi - ARR AY
• Exceptional size-to-power ratio; easily powerful enough to use for main system, delay stacks, or fill duties • QuickFly rigging offers flexibility of both horizontal and vertical arrays, with option to fly or groundstack
Fascinating
• Consistent and predictable array performance ensures accurate system design • Constant tonal balance with distance • Optimized for high SPL, LF impact and medium-throw applications • Clarity, intelligibility, impact and precision for live music
Usable bandwidth (-10 dB) Amplifier Maximum SPL RMS handling capacity
45 Hz – 20 kHz 1 x 2000 W 1 x 400 W 8ohm rms Class D two channel amplifier 139 dB
Application
LF 2 x 900 W HF 2 x 110 W
The Axi-Array is a high-power active loudspeaker designed to provide high-quality reinforcement of theatres and theatrical sound, including concert audio and corporate A/V presentations of all types for both portable users and fixed venue installations. It can be used in center and side-fillin large-scale systems and also distributed systems in stadiums and theme park.
Components
LF: 2 x 12” HF: 2 x 3” Nominal impedance: LF = 8 ohms, HF = 8 ohms
Physical data
W x H/h x D
436 x 522 x 803 mm
Weight (net)
52 kg
Features
Connectors
2 x Powercon® 230 v
Connectors
2 x XLR in parallel DSP Lcd screen controller
Material
Baltic birch plywood
Finish
RAL 6009 Grey-Black polyurea coating
The Axi-Array is an enclosure incorporating configuration that features tow 3” diaphragm compression driver loaded onto two 12” low-frequency transducer integrated into a compact low-profile bass-reflex tuned enclosure. It applies modern technology to overcome historical point source array limitations. There is tight-packing results in cleaner sightlines and neater appearance, and it eliminates angle setting.
Front
Polyester powder-coated steel Grill, Electro-static steel sheet finished in laser technology
Each Axi-Array cabinets utilizes an axi horn for precise 25 horizontal coverage in tight-packed arrays. With the quickfly rigging option it offers flexibility of both horizontal and vertical arrays.
Steel with double-coated zinc and polyester powder
The Axi-Array is consistent and predictable array performance ensures accurate system design.
Rigging
Axi - SUB
• Extended low frequency response down to 27 Hz • Self – Powered
Spooky
• Ultra-efficient neodymium magnet drivers • DSP presets for cardioid mode • Progressive vent for increased peak SPL, and minimal turbulence noise
Usable bandwidth (-10 dB) Amplifier Maximum SPL RMS handling capacity
27 Hz – 125 Hz 1 x 1500 W 8ohm rms Class D amplifier 137 dB 1500 W
Components
1 x 18” cone drivers Nominal impedance: 8 Ω Voice coil size: 4” Power-handling capability: 1500 W
Physical data
W x H/h x D
530 x 704 x 758 mm
Application
Weight (net)
68 kg
Connectors
2 x4-point Speakon®
The Axi-Sub bass cabinet is designed to boots high-quality reinforcement of music in a wide range applications, including concert audio and corporate A/V presentations of all types for both portable users and fixed venue installations.
Material
Baltic birch plywood
Finish
Grey-black, RAL 6006
Front
Polyester powder-coated steel grill, acoustically neutral fabric
Features
Rigging
Pole-mount socket, integrated rigging for flying, stacking runners (steel with dual coating zinc and polyester powder)
The Axi-Sub bass is housing a 18” woofer and 4” voice coil. It can be deployed either as an FOH system or else as a compact distributed sub-bass solution for delays and fills. All applications are up and running with a quick set-up.
Mio
• A soft, compact and light design, with rigging and sightline limitations
Application
• Extended LF resources for contour requirements from flat to medium
The MIO is a passive two-way line array element designed to deliver high-quality music and vocals reinforcement in a wide array of applications, including concert audio and corporate A/V presentations of all mobile and fixed venue utilization.
• Clarity, intelligibility and precision for vocals and lead instruments
Double Impact
• 110° horizontal directivity for distributed applications, fills and central clusters • QDS-13 advanced system drive and protection
Features The MIO Line Array is a rugged, lightweight enclosure housing two 6.5” woofers and one 2.83” fre- quency compression drivers. Advanced components provide a high power-to- weight ratio.
Usable bandwidth (-10 dB) Nominal directivity (vertical line source) (-6dB) Maximum SPL RMS handling capacity Components
Rigging Physical data
80 Hz – 20 kHz Horizontal: 110° symmetric Vertical: Dependent upon number of elements and line source curvature 136 dB LF: 600 W HF: 80 W LF: 2 x 6.5’’, voice coil 3”, neodymium weather-resistant. HF: 1 3” ribbon wire neodymium diaphragm compression driver Nominal impedance: LF = 8 ohms, HF = 8 ohms Steel, certified for: 24 Mio Angle increments: 0, 1, 2, 3, 4, 5, 7.5, 10° W x H/h x D
532 x 207,2 x 441 mm
Weight (net)
28 kg
Connectors
2 x 4-point Speakon®
Material
Baltic birch plywood
Finish
RAL 6006 Grey-Black
Front
Polyester powder-coated steel grill, acoustically neutral fabric
Rigging
Steel with double-coated zinc and polyester powder
MIO delivers a considerable number of improvements over the previous generation of line sources, particularly when it comes to directivity control in the horizontal plane, transducers resources for increased operating bandwidth and coherence, vertical coverage capability and an extensive choice of operation modes to accommodate various LF contour requirements. As an independent system, its compact size and low weight offers a solution to your rigging and visual limitations. MIO can be deployed either as an FOH system or as a compact distributed solution for delays and fills, thanks to total integrity with the MIO Sub extension. All applications are up and running in a remarkably short time. Both the MIO power touring rack and QDS-13 Power amplified controller preset library deliver an extremely advanced, precise drive system for MIO. A single MIO Power can drive up to 6 MIO Line Array cabinets in a full range preset configuration for lead instruments, vocals and flat LF contour music material. Alternatively, MIO can be deployed with the MIO Sub to extend its bandwidth down to 32 Hz.
Mio Sub
• 32 Hz LF limit, high - power handling, low distortion and thermal compression • Progressive vent for increased peak SPL, and minimal turbulence noise • QDS-13 DSP presets for cardioid mode (symmetrical and asymmetrical)
Dynamite Resonance
• Compatible rigging : MIO / MIO Sub
Usable bandwidth (-10 dB) Maximum SPL RMS handling capacity Components
Rigging Physical data
32 Hz – 100 kHz 137 dB LF: 1000 W LF: 1 x 18’’ weather-resistant, (4’’ coil, aluminium die-cast basket, vented magnet design) Nominal impedance: 8 ohms Steel, certified for: 12 NUA Sub
Application
WxHxD
532 x 707 x 758 mm
Weight (net)
52 kg
Connectors
2 x 4-point Speakon®
Material
Baltic birch plywood
Features
Finish
Grey-black, RAL 6006®
Front
Polyester powder-coated steel grill, acoustically neutral fabric
The MIO Sub is a rugged, lightweight enclosure housing a 18” woofer. It can be deployed either as an FOH system or as a compact distributed sub-bass solution for delays and fills, thanks to total integrity with the MIO Line Array elements. All applications are up and running in a remarkably short time.
Rigging
Pole-mount socket, integrated rigging for flying, stacking runners (steel with dual coating zinc and polyester powder)
The MIO Sub Extra punch bass cabinet is designed to provide high-quality reinforcement of music and voice over a wide array of applications, including concert audio and corporate A/V presentations of all mobile and fixed venue utilization.
The AC rack and the QDS13 amplified controller preset library represent an extremely advanced, precise drive system for MIO and MIO Sub.
Nua
Line Array
• Soft, compact and lightweight design with rigging and sightline limitation • Extended LF resources for contour requirements from flat to medium • Clarity, intelligibility and precision for vocals and lead instruments
Golden Shot
Application The NUA is a passive two-way line array element designed to provide a highquality boost for music and vocals in a wide variety of applications, including concert audio and corporate A/V presentations for all types of mobile and fixed venue utilization.
• 110° horizontal directivity for distributed applications, fills and central clusters
Features
• QDS-13 advanced system drive and protection
The Nua Line Array is a rugged, lightweight enclosure featuring two 8” woofers and a 2.83” frequency compression driver. Advanced components provide a high power-to-weight ratio. Nua delivers a considerable number of improvements over the previous generation of line sources, particularly with regard to directivity control in the horizontal plane, transducers resources for increased operating bandwidth and coherence, vertical coverage capability and extensive choice of operation modes to accommodate various LF contour requirements.
Usable bandwidth (-10 dB) Nominal directivity (vertical line source) (-6dB) Maximum SPL RMS handling capacity Components
Rigging
Physical data
55 Hz - 20 kHz Horizontal: 110° symmetric Vertical: Dependent upon number of elements and line source curvature
As an independent system, its compact size and low weight offers a solution to your rigging and visual limitations. NUA can be deployed either as an FOH system or as a compact distributed solution for delays and fills thanks to total integrity with the NUA Sub extension. All applications are up and running in a remarkably short time. Both the Nua Power touring rack and QDS-13 Power amplified controller preset library deliver an extremely advanced and precise drive system for NUA.
139 dB LF: 600 W HF: 120 W LF: 2 x 8’’, voice coil 3” neodymium weather-resistant HF: 1 x 1.4’’, voice coil 2.83” neodymium diaphragm Nominal impedance: LF = 8 ohms, HF = 8 ohms Steel, certified for: 24 NUA Angle increments: 0, 1, 2, 3, 4, 5, 7.5, 10° W x H/h x D
716 x 245 x 489.7 mm
Weight (net)
28 kg
Connectors
2 x 4-point Speakon®
Material
Baltic birch plywood
Finish
RAL 6006 Grey-Black
Front
Polyester powder-coated steel grill, acoustically neutral fabric
Rigging
Steel with double-coated zinc and polyester powder
A single NUA Power can drive up to 6 NUA Line Array cabinets in a full-range preset configuration for lead instruments, vocals and flat LF contour music material. Alternatively, NUA can be set up in conjunction with the NUA Sub to extend its bandwidth down to 32 Hz.
Nua Sub
• 32 Hz LF limit, high power handling, low distortion and thermal compression • Progressive vent for increased peak SPL, and minimal turbulence noise • QDS-13 DSP presets for cardioid mode (symmetrical and asymmetrical)
Armor-Piercing
• Compatible rigging : NUA / NUA Sub
Usable bandwidth (-10dB) Maximum SPL RMS handling capacity Components
Rigging Physical data
27 Hz - 100 kHz 137 dB LF: 1000 W LF: 1 x 18’’ weather-resistant, (4’’ coil, aluminium die-cast basket, vented magnet design) Nominal impedance: 8 ohms Steel, certified for: 12 Nua Sub WxHxD
728 x 558 x 758 mm
Weight (net)
52 kg
Connectors
2 x 4-point Speakon®
Material
Baltic birch plywood
Finish
Grey-brown, RAL 6006®
Front
Polyester powder-coated steel grill, acoustically neutral fabric
Rigging
Pole-mount socket, integrated rigging for flying and stacking runners (steel with dual coating zinc and polyester powder)
Application The NUA Sub, longitude and punch bass cabinet is designed to deliver high- quality reinforcement of music and voice in a wide array of applications, including concert audio and corporate A/V presentations for all sorts of mobile and fixed venue utilization.
Features The NUA Sub is a rugged, lightweight enclosure housing a 18” woofer. It can be deployed either as an FOH system or as a compact distributed sub bass solution for delays and fills thanks to total integrity with the NUA Line Array elements. All applications are up and running in a remarkably short time. Both the AC Rack and the QDS13 amplified controller preset library deliver an extremely advanced, precise drive system for NUA and NUA Sub.The AC Rack and the QDS13 amplified controller preset library deliver an extremely advanced and precise drive system for Nua and Nua Sub.
Aryo
• Soft, compact and lightweight design, with rigging and sightline limitation • Extended LF resources for contour requirements from flat to medium • Clarity, intelligibility and precision for vocal, speech and lead instruments
Warrior
• Arrayable as a constant curvature horizontal line source • 110° horizontal directivity for distributed applications, fills and central clusters • QDS-13 advanced system drive and protection
Usable bandwidth (-10 dB) Nominal directivity (vertical line source) (-6dB) Maximum SPL RMS handling capacity Components
Rigging Physical data
55 Hz – 20 kHz (ARYO preset) Horizontal: 110° symmetric Vertical: Dependent upon number of elements and line source curvature 141 dB LF: 2 x 600 W HF: 2 x 140 W
Application The ARYO passive two-way line array element is designed to deliver high-quality reinforcement of music and speech in a wide array of applications including concert audio and corporate A/V presentations for all sorts of mobile and fixed venue utilization. Features
LF: 2 x12” neodymium weather-resistant. HF: 2 x 4” neodymium diaphragm compression driver Nominal impedance: LF = 8 ohms, HF = 8 ohms Steel, certified for: 24 ARYO Angle increments: 0, 1, 2, 3, 4, 5, 7.5, 10°
The ARYO Line Array is a rugged, lightweight enclosure housing two 12” woofers and two 4” frequency compression drivers. Advanced components provide a high power-to-weight ratio. ARYO delivers a considerable number of improvements over the previous generation of line sources, especially when dealing with directivity control in the horizontal plane, transducer resources for increased operating bandwidth and coherence, vertical coverage capability and an extensive array of operation modes to accommodate various LF contour requirements.
W x H/h x D
830 x 362 x 618 mm
Weight (net)
56 kg
Connectors
2 x 4-point Speakon®
Material
Premium baltic birch plywood
Finish
RAL 6006 Grey-Black
Front
Polyester powder-coated steel grill, acoustically neutral fabric
As an independent system, its compact size and low weight offers a solution to your rigging and visual limitations. ARYO can be deployed either as an FOH system or as a compact distributed solution for delays and fills, thanks to total integrity with the RS Sub extension. All applications are up and running in a remarkably short time.
Rigging
Steel with dual coating zinc and polyester powder
Both the AC Rack and the QDS-13 Power amplified controller preset library deliver an extremely advanced, precise drive system for ARYO.
Rs
Sub
• 25 Hz LF limit, high power handling, low distortion and thermal compression • Progressive vent for increased peak SPL, and minimal turbulence noise • Ultra long and superior sub-bass extension
B-52
• QDS-13 DSP presets for cardioid mode (symmetrical and asymmetrical) • Optimized to integrate with ARYO, NUA and other AFRO Pro Audio loud speakers
Usable bandwidth (-10 dB) Maximum SPL RMS handling capacity Components
Rigging Physical data
27 Hz – 100 kHz 140 dB LF: 2000 W LF: 2 x18” weather-resistant.(4’’ coil, aluminium die-cast basket, vented magnet design) Nominal impedance: 4 ohms Steel, W x H/h x D
1350 x 565 x 718 mm
Weight (net)
99 kg
Connectors
2 x 4-point Speakon®
Material
Baltic birch plywood
Finish
RAL 6006 Grey-Black
Front
Polyester powder-coated steel grill, acoustically neutral fabric
Rigging
Pole-mount socket, integrated rigging for flying, stacking runners (steel with dual coating zinc and polyester powder)
Application The RS SUB, ultra longitudal and horn loaded bass cabinet is designed to boost high-quality music and speech in a wide array of applications, including concert audio and corporate A/V presentations for all sorts of mobile and fixed venue utilization. Features The RS SUB is a rugged enclosure housing two 18” woofers. It can be deployed either as an FOH system or a sub-bass solution for all type applications. Both the AC Rack and the QDS13 amplified controller preset library deliver an extremely advanced, precise drive system for RS SUB.
AC-Rack
Accessories Aryo Bumber
AxiSide Doly
Nua Bumber
MioSub Doly
Aryo Doly
NuaSub Doly
RsSub Doly
Mio Bumber
AxiSub Doly
AC-Rack Doly
HEAD OFFICE Haliç Kongre Merkezi Beyoglu / Istanbul / TURKEY Phone: +90 212 311 11 11 Fax: +90 212 311 11 99
FACTORY Ayazaga Mah. Cendere Yolu Çakırlar Sok. No:21 Sisli / Istanbul / TURKEY Phone: +90 212 289 54 54 Fax: +90 212 332 27 29
afroproaudio.com
HEAD OFFICE Haliç Kongre Merkezi Beyoglu / Istanbul / TURKEY Phone: +90 212 311 11 11 Fax: +90 212 311 11 99
FACTORY Ayazaga Mah. Cendere Yolu Çakırlar Sok. No:21 Sisli / Istanbul / TURKEY Phone: +90 212 289 54 54 Fax: +90 212 332 27 29
afroproaudio.com