Cat 2014 dbtechnologies high by RSP Music IvanKorchak

Catalogue Catalogue

2014

The sound of experience. AEB, the ACOUSTIC ENGINEERING BUREAU, has its headquarters in the outskirts of Bologna, which today is one of the most industrialized areas in Italy.

interrelated performance between the various components in active speaker systems, AEB is now also designing and manufacturing most of the speaker components used in its enclosures.

AEB has been designing and manufacturing electronic and electro acoustic products for the professional audio world for over 25 years under its trademark dBTechnologies.

This process allows us to optimize and match the performance of the electronic components to the electro acoustic transducers. A further mark of distinction of dBTechnologies products is the major emphasis given to details and design.

Over the years, dBTechnologies products have gained substantial recognition for their technological innovations, as well as their inherent standard of quality. Years of continuous significant investments in design, R&D and manufacturing technologies have made their mark on the industry. AEB’s ability to develop innovative products, in a remarkably short time to market is the key ingredient for an ever-increasing market share and success.

dBTechnologies aim is to provide the audio professional, as well as musicians and sound designers, with products that combine high performance with world renowned Italian flair and design. With the cooperation between Italy’s finest designers it has been possible to develop truly elegant loudspeakers, which make their own significant contribution to a magnificent stage setting.

Professional power amplifiers, active loudspeakers and audio mixers complete the comprehensive line of products developed and produced in our extensive facilities. It came naturally to AEB, that in the continuous quest to improve

Product Index DVA Series DVA M2M + M2S DVA MS12

SIGMA Series Active Line Array Module Active Subwoofer

6 10

Active Line Array Module DVA T12 DVA T8 Active Line Array Module DVA T4 Active Line Array Module DVA S30 N Active Subwoofer DVA S1521 N Active Subwoofer DVA S1518 N Active Subwoofer DVA S2585 N Active Subwoofer DVA S20 DP Active Subwoofer DVA S10 DP Active Subwoofer DVA S09 DP Active Subwoofer DVA S08 Active Subwoofer DRK 20M Motorized Flybar DVA Accessories

12 16 22 28 29 30 31 32 33 34 35 36 37

DVX Series DVX DM12 TH DVX DM15 TH

Active Stage Monitor Active Stage Monitor

40 40

DVX D8 HP DVX D10 HP DVX D12 HP DVX D15 HP DVX DM28 DVX DM12 DVX DM15

Active Speaker Active Speaker Active Speaker Active Speaker Active Stage Monitor Active Stage Monitor Active Stage Monitor

44 44 45 45 46 47 47

SIGMA S215 SIGMA S115 SIGMA S118

Active Speaker Active Speaker Active Subwoofer

49 50 51

FLEXSYS Series FLEXSYS F8 Active Speaker FLEXSYS F10 Active Speaker FLEXSYS F12 Active Speaker FLEXSYS F15 Active Speaker FLEXSYS F212 Active Speaker FLEXSYS F315 Active Speaker FLEXSYS FM8 Active Stage Monitor FLEXSYS FM10 Active Stage Monitor FLEXSYS FM12 Active Stage Monitor

53 53 54 54 55 55 56 57 57

OPERA BLACK LINE Series OPERA 710 BL Active Speaker OPERA 712 BL Active Speaker OPERA 715 BL Active Speaker OPERA 910 BL Active Speaker OPERA 912 BL Active Speaker OPERA 915 BL Active Speaker

60 60 60 61 61 61

OPERA DX Series OPERA 508 DX OPERA 510 DX OPERA 512 DX OPERA 515 DX

Active Speaker Active Speaker Active Speaker Active Speaker

64 64 65 65

p.6

p.10

M2M / M2S

p.76 MS12

p.85

p.40 SUB 15 H / 18 H DM12 TH / DM15 TH

OPERA DX Series OPERA 710 DX Active Speaker OPERA 712 DX Active Speaker OPERA 715 DX Active Speaker OPERA 910 DX Active Speaker OPERA 912 DX Active Speaker OPERA 915 DX Active Speaker

MINIBOX Series 66 67 67 68 69 69

CROMO+ Series CROMO 8+ CROMO 10+ CROMO 12Club CROMO 12+ CROMO 15+

Active Speaker Active Speaker Active Speaker Active Speaker Active Speaker

71 72 72 73 73

SUB 15H SUB 18H

Active Subwoofer Active Subwoofer

76 77

SUB 28D SUB 12D SUB 05D SUB 808D SUB 15D SUB 18D

Active Subwoofer Active Subwoofer Active Subwoofer Active Subwoofer Active Subwoofer Active Subwoofer

78 79 80 81 82 83

Mobile Active Speaker

SUB Series

READY 4 READY 4

MINIBOX L160D MINIBOX K300 MINIBOX K70 MINIBOX K162

Active Speaker Active Speaker Active Speaker Active Speaker

87 88 89 89

Passive Speaker Passive Speaker Passive Speaker Passive Speaker Passive Subwoofer Passive Subwoofer Passive Speaker Passive Speaker Passive Speaker Passive Speaker Passive Subwoofer Passive Subwoofer

92 92 93 93 94 95 96 96 97 97 98 99

ARENA Series ARENA 8 ARENA 10 ARENA 12 ARENA 15 ARENA SW15 ARENA SW18 ARENA 8 PRO ARENA 10 PRO ARENA 12 PRO ARENA 15 PRO ARENA SW15 PRO ARENA SW18 PRO

OPERA P OPERA P15

Passive Speaker

100

CONTROLLER & AMPLIFIER AC26N HPA 1000 HPA 1400 HPA 2800 HPA 3100L

Controller Amplifier Amplifier Amplifier Amplifier

101 102 102 102 102

DVA M2M DVA M2S DVA MS12 DVA T12 DVA T8 DVA T4 DVA S30N DVA S1521N DVA S1518N DVA S2585N DVA S20 DP DVA S10 DP DVA S09 DP DVA S08 DRK 20M

Digital Array

Systems & Subs

Digital Array System & Subs

DVA Digital Array Systems & Subs

Digital Array Digital Array Systems & Subs

Systems & Sub

Line array technology has revolutionized sound reinforcement, particularly for large venues and events. Arraying several speaker cabinets vertically is a far more effective method of delivering and directing sound. Line array’s signal levels do not drop off as steeply with increasing distance as is the case with conventional systems. What‘s more, their patterns of throw are very wide despite the systems’ lean configurations. Until recently this technology saw limited use mainly in large, elaborate, and costly projects and installations. But with arrival of DVA, true line array technology is now available for a wide range of portable and permanent sound reinforcement applications. Factoring all the many different parameters and users’ needs into the design equation, the dBTechnologies team of engineers developed a line array system that is easy to configure, exceedingly light, and tremendously versatile. What‘s more, the managed to take all these vital criteria into account without imposing limits on curving capacity and the number of arrayed components. Called DVA, this system makes the most of line array technology’s considerable audio benefits.

Leveraging state-of-the-art technologies, materials, and many years experience developing powered speaker systems, dBTechnologies has turned up a line array series that raises the performance bar for handling, versatility, and return on investment. dBTechnologies has a competitive edge. Our engineers’ deep insight into power electronics, DSP programming, acoustics, mechanics, materials, and manufacturing practices enables us to independently develop innovative solutions in each of these areas. Such comprehensive R&D proficiency puts us in a unique position: We are able to transform inspired ideas into premiumquality products that deliver outstanding performance at an unrivalled price-point. The DVA series stands as a shining example of this all-around ability. Nowhere are the benefits of integrated amps, active crossovers, and processordriven control more apparent than in DVA threeway line array units.

Fully powered units, freely scalable to setups of any size.

None of the impedance and amp channel availability concerns associated with passive models. ¢

Lossless signal path with no need for speaker cables.

Extremely tough yet remarkably light enclosures.

Digital controller (DSP) onboard for utmost operating safety.

DVA Digital Array Systems & Subs

2-WAY ACTIVE LINE ARRAY SYSTEM INTEGRATED HARDWARE WITH INNOVATIVE FAST LOCK MECHANICS LIGHTWEIGHT AND ELEGANT PREMIUM DESIGN DUAL PHASE PLUG DESIGN FOR AN EXTREMELY PRECISE DISPERSION 200+200W RMS DIGIPRO速 G3 CLASS-D AMPLIFIER (800W PEAK POWER) SWITCHED MODE POWER SUPPLY WITH AUTO-RANGE HI END DIGITAL CONTROLLER ON BOARD (DSP) INNOVATIVE MASTER AND SLAVE CONCEPT LIGHTWEIGHT NEODYMIUM MAGNETS FOR ALL TRANSDUCERS

Remember the DVA T8 launch? As hard as it was to believe, all that power and performance came packed in an incredibly compact, lightweight speaker. Now the DVA MINI is about to set a new standard (again). Offering the same hallmark user-friendliness and sound quality of its DVA predecessors, the MINI series sets the new benchmark for easy-to-use systems with top-range sound performance. The innovative Master + Slave design makes for simplified system wiring and less total weight, making this series equally ideal for permanent installation in theatres, places of worship, convention centres, and for concert tours and live music performances.

M2M Full of Technology

M2S

Master + Slave

A unique perfect system

DVA Digital Array Systems & Subs

2-Way Active Way Active 3 Line Array System

Line Array Syste

DVA M2M

DVA M2S

Technical Data

Speaker Type: 2-Way Active Master Line Array Module

Speaker Type: 2-Way Slave Line Array Module

Acoustical data

Frequency Response [- 6dB]: 90 - 19.000 Hz Frequency Response [- 10dB]: 80 - 20.000 Hz Max SPL: One Unit: 126 dB HF: 2x1” Type HF: Neodymium Voice Coil HF: 1” LF: 2x6.5” Type LF: Neodymium Voice Coil LF: 1.5” Directivity: 100x20° Single unit

Frequency Response [- 6dB]: 90 - 19.000 Hz Frequency Response [-10 dB]: 80 - 20.000 Hz Max SPL: One Unit: 126 dB HF: 2x1” Type HF: Neodymium Voice Coil HF: 1” LF: 2x6.5” Type LF: Neodymium Voice Coil LF: 1.5” Directivity: 100x20° Single unit

Amplifier

Amp Technology: Digipro® G3 Amp Class: Class D RMS Power HF Amp: 200 W (100 W + 100 W) RMS Power LF Amp: 200 W (100 W + 100 W) Cooling: Convection

Located on the relative M2M module

Processor

Input

Controller: DSP 56 bit AD/DA Converter: 24 bit/48 kHz System Presets: 9 presets (8x HF and Low-Mid corrections and 1x for service use) Limiter: Multiband, RMS/Peak, Thermal Crossover Frequency LF-HF: 2000 Hz Slope LF-HF: 24 dB/Octave

Signal Input: 1 Custom connector

Processor Located on the relative M2M module

Mechanics Housing: Polypropylen PP Handles: 2x back side Fittings: Integrated hardware with fast lock mechanics Splay Angles: 0°- 1,5°- 3°- 4,5° - 6°- 8°- 10°- 12,5°- 15° Width: 460 mm (18.1 in) Height: 190 mm (7.5 in) Depth: 345 mm (13.6 in) Weight: 7.1 kg (15.7 lbs)

Input Signal Input: 1x XLR fem, Bal. Signal Output: 1x XLR male, Bal. Power Supply: 400W SMPS with PSU Auto-range (110V~ and 220V~) Power Socket: 1x PowerCon In 1x PowerCon Out

460 mm

345 mm

190 mm

DVA Digital Array Systems & Subs

Low-mid range constant coverage The low and mid-range reproduction is performed by the two 6,5â&#x20AC;? neodymium woofers, whose disposition and efficiency is extremely optimized thanks to a custom dual phase-plug. The choice of neodymium magnets ensures even more value to the module, because it contributes to contain the overall weight of the M2M speaker under 7.6 kg/16.8 lbs (7,1 kg/15,7 lbs for the M2S model).

Clear and assertive top end The two 1â&#x20AC;? drivers, finely tuned for the DVA M2 custom designed array horns, deliver a crystalline clear sound in high frequency, in order to provide to the audience the same intelligibility of the DVA line array systems. Furthermore, the premium quality Neodymium magnets are synonym of reliability, performance and lightness.

Light weight. Heavy duty. The high quality reinforced Polypropylene enclosure, and the internal hard-wearing anti-vibration structure, makes the M2M and M2S boxes very tough and able to work as heavy duty professional tools. These features, together with neodymium transducers and the lightest amplifier ever engineered by dBTechnologies R&D, contributes to realize an exceptionally light, durable and powerful line array module for the well-known DVA Series.

Premium design DVA Mini is characterized by a very clean aesthetic and a very discreet look. Even the mechanics are hidden behind the frontal panel, and the elegant curvature of the frontal hexagonal grille contributes to create a very nice looking system for any kind of fixed installation purposes or live music events where the system should be totally invisible.

Consistent coverage pattern Low and mid-range reproduction has been extremely optimized by a custom dual phase-plug. This technology significantly improves the midrange efficiency of the speaker and, most of all, makes the horizontal coverage really homogeneous and consistent.

DVA Digital Array Systems & Subs

DVA M2M ¢ DVA M2S ¢

Top Performance Combined With Total Control

Download telemetry from USB An integrated USB B-type port on the M2M amplifier allows the user to access the complete telemetry of the speaker, monitoring the status of every single element of the line array, including total playing hours, temperatures and performances reports. Furthermore it is possible to download a file log as a status report, and upgrade the Firmware of the DVA M2M using the same USB port.

Fast lock mechanics DVA mini is an incredibly versatile system, and you will find out this when you’ll have your hands-on it. dBTechnologies engineers have provided a way to simplify the process of installation and rigging by completely removing the pins and mechanics, in favor of a quick-locking system. You’ll simply have to place one module below the previous one, and slide it towards one side until the red lever is up. Mounting the system in a flash has never been so easy!

Single rear mechanics A single mechanic is provided on the back of every single DVA M module. Using incremental angles steps dBTechnologies has greatly improved the precision of the mechanics. Smaller steps between the modules mean more precision in the aiming of your DVA linear array system.

Ground stacking options Every time it is not possible to fly the system, the DVA mini can serve you as a ground stacked system. Indeed this system can be easily mounted on the top of the MS12 sub without any additional frame or mechanic. As an optional, DSA-M2 pole mount adapter can handle the line arrays modules, helping the user to elevate the system to a reasonable height through a standard pole.

DVA Digital Array Systems & Subs

ACTIVE BASS REFLEX FLYABLE SUBWOOFER

DVA MS12 is the flyable subwoofer which comes with the DVA mini series. Especially designed to fit perfectly with an M2M and M2S array, the MS12 is equipped with a single 12” woofer in a bass reflex enclosure, acting as a perfect low-end extension module for DVA mini systems.

INTEGRATED HARDWARE WITH INNOVATIVE QUICK-LOCK MECHANICS LIGHTWEIGHT AND ELEGANT PREMIUM DESIGN 700W RMS DIGIPRO® G3 CLASS-D AMPLIFIER (1400W PEAK POWER) SWITCHED MODE POWER SUPPLY WITH AUTO-RANGE HI END DIGITAL CONTROLLER ON BOARD (DSP) DUAL FUNCTION FEET (FLYING OR GROUND STACKING PURPOSES)

MS12 Full of Technology

430 mm

DVA Digital Array Systems & Subs

Active Bass ReflexRe Active Bass Flyable Subwoofer

Flyable Subwoofe

DVA MS12 Technical Data Speaker Type: Active bass reflex flyable subwoofer

Acoustical data Frequency Response [- 6dB]: 45 - 140 Hz Frequency Response [-10 dB]: 40 - 165 Hz Max SPL: One Unit: 131 dB LF: 12” Voice Coil LF: 3” Directivity: Omnidirectional

Versatility This subwoofer delivers an incredible SPL considering its very compact dimensions, and it can be easily used both flown and ground stacked. The smart design of the feet allows the user to avoid the dull removal of the flying brackets: it is possible to remove the feet in few seconds and screw them again upside-down. In this way any contact between the flying brackets and the ground is avoided, as only the rubber feet will touch it. A practical X-over out can be used to feed signal straight to the line arrays modules, simplifying considerably the signal and power cabling.

Amplifier Amp Technology: Digipro® G3 Amp Class: Class D Power Supply: 700W SMPS with PSU Auto-range (110V~ and 220V~) LF Amp: 700 W RMS (1400 W Peak) Cooling: Convection

Processor Controller: DSP 56 bit AD/DA Converter: 24 bit/48 kHz Controls: X-Over frequency selection Phase selection (0° or 180°) Outputs mode selection (Link/X-over) Mini-USB type “B” port (service data) Limiter: Dual active, Multiband, RMS/Peak, Thermal Crossover Frequency LF-HF: 110Hz - 140Hz LF X-over out slope: 24 dB/Octave

Mechanics Housing: Multiplex birch plywood - Polyurea painting Handles: 1x left side, 1x right side Feet: 4x Dual Position Reversable Feet (flying/stacking mode) Fittings: M20 screw for pole mount on top side Integrated hardware with fast lock mechanics Width: 460 mm (18.1 in) Height: 430 mm (16.9 in) Depth: 385 mm (15.2 in) Weight: 26.5 kg (58.4 lbs)

Digipro G3 Class-D amplifier DVA MS12 comes with the new generation of exclusive digital amplifiers Digipro G3. Engineered by dBTechnologies, these new amplifiers deliver a power that you can’t expect from such a small amplifier. Distinguished by great new features, an exceptionally lightweight design and a very remarkably efficiency, it pushes the system performance at its maximum. In order to let the speaker play flawlessly with both 110V~ and 220V~ power, a Switched Mode Power Supply with auto-range circuit has been built inside the DVA MS12.

Download telemetry from USB An integrated USB B-type port on the DVA MS12 amplifier allows the user to access the complete telemetry of the sub, monitoring the status of the speaker, including total playing hours, temperatures and performances reports. Furthermore it is possible to download a file log as a status report, as well as upgrade the Firmware of the DVA MS12 using the same USB port.

DVA Digital Array Systems & Subs

LONG-THROW SYSTEM FULLY POWERED THREE-WAY UNIT FREELY SCALABLE TO SETUPS OF ANY SIZE LOSSLESS SIGNAL PATH WITH NO NEED FOR SPEAKER CABLES SEQUENTIALLY CONFIGURABLE ARRAY SEGMENTS HIGH-END DIGITAL CONTROLLER (DSP) ON BOARD NETWORK-READY WITH AN INTEGRATED RDNET PORT HARDWARE COMPATIBLE WITH DVA T8 AND T4 SYSTEMS

The global group of dBTechnologies companies develops and manufactures individual speaker components autonomously, and often specifically for the given application. We do not subscribe to the practice of equalizing and optimizing speakers with elaborate technology to bring them up to our standards. Instead, it has been our long-standing policy to build from the bottom up components with specs tailored to deliver the best audio performance for the application. DVA T12 is a step up the evolutionary ladder from the successful DVA T4 line array system. Although it provides more power and has greater range, its active three-way design makes it just as easy to set up and install as its predecessor.

T12 Pf C P Pf fC C

Full of Technology

DVA Digital Array Systems & Subs

3-Way Active 3 Way Active Line Array Module

Line Array Modu

DVA T12 Technical Data

The DVA T12 features state-of-the-art neodymium speakers and highperformance digital amps with total of 1,410W output power. In combination with top-drawer DSP and premium quality AD-DA converter, it delivers high-definition sonic images with massive SPL for large sound reinforcement applications.

Speaker Type: 3-Way Active Line Array Module

Acoustical data Frequency Response [- 3dB]: 60 - 19.000 Hz Max SPL: One Unit: 136 dB HF: 3x1” Voice Coil HF: 1.4” MF: 2x 6.5” Type MF: Neodymium Sealed Basket Phase Plug Horn Loaded Voice Coil MF: 2” LF: 12” Type LF: Neodymium Voice Coil LF: 3” Directivity: 100x10° Single unit

Amplifier Amp Technology: Digipro® G2 Amp Class: Class D HF Amp: 350 W RMS MF Amp: 350 W RMS LF Amp: 710 W RMS Cooling: Convection

Processor Controller: DSP 56 bit AD/DA Converter: 24 bit/96 kHz System Presets: 9 (8x HF/Low-mid correction) Limiter: Dual Active Limiter Multiband RMS, Peak, Thermal Crossover Frequency MF-HF: 1800 Hz Slope MF-HF: 24 dB/Octave Crossover Frequency LF-MF: 420 Hz Slope LF-MF: 24 dB/Octave

Weighing just 29kg, this remarkably compact unit belies its unobtrusive look by enabling you to set up very powerful line arrays that deliver extraordinary performance.

Input Signal Input: 1x XLR fem, Bal. Signal Output: 1x XLR male, Bal. Network: RDNet remote control RJ45 connector IN/OUT Power Socket: 1x PowerCon In 1x PowerCon Out Voltage Range: 90 - 240 V~

Mechanics Housing: Polypropylen PP Aluminium reinforced Housing Design: Trapezoidal 10° Rain cover: Included Rigging Points: Integrated rigging hardware Width: 580 mm (23.2 in) Height: 386 mm (15.44 in) Depth: 430 mm (17.2 in) Weight: 29,9 kg (63.93 lbs)

DVA Digital Array Systems & Subs

Extended low-end performance A 12” neodymium woofer in a band-pass housing covers the low frequency range. Remarkably powerful, it packs an assertive punch that reaches down to 60 Hz to enable fullrange applications. The 12” woofer is slanted inside the housing, giving the cabinet a lean, unobtrusive look. ¢ ¢

12” NEODYMIUM WOOFER FULLRANGE CAPABILITY FROM 60HZ UP

T12 LF

Accurate and awesomely efficient midrange response

T12 MF

The DVA T12’s two 6.5” neodymium midrange are placed close together to maximize coherent coupling and response for those critical midrange frequencies. The speaker resides in a sealed basket to optimize the displacement volume. This makes the midrange even more responsive. With a high BL factor, it reacts far faster to transients and renders each attack with awesome accuracy. Both 6.5” midrange are equipped with an optimized phase plug and feed into a frontloaded horn to achieve a uniform coverage pattern.

High-definition top end

T12 HF

The 1” neodymium HF drivers feature 1.4” Mylar diaphragms. Exceptionally light and responsive, they deliver richly detailed signals with remarkably linear frequency response. Specially developed for use in line arrays, these ultra compact drivers may be deployed in very close proximity to one another. This is essential to minimize interference in such arrays. The DVA T12 is loaded with three HF drivers tuned specifically for the custom designed array horn. This combination maximizes the coupling of the drivers’ outputs and extends the range of the HF signal.

Consistent coverage pattern The DVA T12 features constant directivity horns, HF drivers, and midrange speakers optimized to deliver a uniform 100°-by-10° coverage pattern. The DVA makes the most of two acoustical effects to help distribute SPL evenly. One is the vector addition of individual horns’ output, with the other being cylindrical wave formation. The coverage pattern may be adapted to suit the sound reinforcement application by varying the length of the array and adjusting the splay between individual components.

T12

¢ ¢

UNIFORM 100°-BY-10° COVERAGE PATTERN EVENLY DISTRIBUTED SPL

DVA Digital Array Systems & Subs

DVA T12 ¢

Top Performance Combined With Total Control

Ground stacks DRK-10 and DRK-20 harnesses can also serve to stack cabinets on the ground when rigging points are unavailable or the ceiling is too low. A special bracket adjusts the inclination down to 7.5°. The DRK-10/20 fits perfectly on an upright DVA S30 subwoofer. Equipped with two receptacles for quick-release pins, it is readily attached without tools. The DVA S30 subwoofer sports two 18“ speakers, a bass reflex horn, a 3000W power amp, and an internal DSP. (To learn more about it, see the chapter entitled Active Subwoofer). ¢

LINE ARRAY BENEFITS IN GROUND-STACKED CONFIGURATIONS

Compatible with DVA T8 and T4 units DVA T12 and DVA T8 series housings and rigging hardware are compatible. This means DVA T8 units may be flown right below a T12 array for use as down-fills in large PA systems. ¢

COMPATIBLE DVA T8’S MAY SERVE AS FAR-FILL EXTENSIONS

Power Supply The PFC switched-mode power supply allows up to four DVA T12 units to be connected to one phase. When connecting large systems (up to 12 units), we recommend splitting up the power feed using a 16ACEKON adapter, tapped and spliced to feed three weatherproofed Power-Con connectors.

DVA Digital Array Systems & Subs

3-WAY ACTIVE WITH A 700W/RMS DIGITAL POWER AMP

DVA T8 is the latest and most advanced incarnation of a string of successful line array systems that started with the DVA T4. Loaded with state-of-theart neodymium woofers, the DVA T8 features a high-performance digital power amp with 700W/RMS total output, a high-end 56-bit DSP, and premium-quality AD-DA converters.

HIGH-END 56-BIT DSP ON BOARD

These superior components come together to deliver superior audio quality and high SPL.

96 KHZ SAMPLING RATE

Remarkably easy to handle, this lightweight, 14.2kg line array’s powerful performance belies its look of subdued elegance and small footprint. It’s hard to believe that something so petite can pack such a mighty punch.

ACOUSTICALLY COMPATIBLE WITH THE DVA T12

MECHANICALLY COMPATIBLE WITH THE DVA T12

Full of Technology

NETWORK-READY WITH AN INTEGRATED RDNET PORT SIX MODULES CONNECTED TO ONE 16A PHASE PLACE LOSSLESS SIGNAL PATH WITH NO NEED FOR SPEAKER CABLES

Pf C P Pf fC C

DVA Digital Array Systems & Subs

Way Active 3 3-Way Active Line Array Module

Line Array Modu

DVA T8 Technical Data Speaker Type: 3-Way Active Line Array Module

Top Performance Paired with Total Control The DVA T8 is a fully active, three-way speaker system equipped with the same innovative technologies that feature so prominently in the DVA T12. Its power supply, DSP, power amps, woofers and drivers were all developed and painstakingly tuned specifically for the DVA T8 system by the dBTechnologies team of engineers.

Acoustical data Frequency Response [- 3dB]: 66 - 18.000 Hz Max SPL: One Unit: 132 dB HF: 2x1” Voice Coil HF: 1.4” MF: 1x 6.5” Type MF: Neodymium Sealed Basket Phase Plug Horn Loaded Voice Coil MF: 2” LF: 8” Type LF: Neodymium Voice Coil LF: 2.5” Directivity: 100x15° Single unit

Amplifier Amp Technology: Digipro® G2 Amp Class: Class D HF Amp: 175 W RMS MF Amp: 175 W RMS LF Amp: 350 W RMS Cooling: Convection

Processor Controller: DSP 56 bit with double precision filters AD/DA Converter: 24 bit/96 kHz System Presets: 9 (8xHF and Low-mid correction) Limiter: Dual Active Limiter Multiband RMS, Peak, Thermal Crossover Frequency MF-HF: 1900 Hz Slope MF-HF: 24 dB/Octave Crossover Frequency LF-MF: 400 Hz Slope LF-MF: 24 dB/Octave

Input Signal Input: 1x XLR fem, Bal. Signal Output: 1x XLR male, Bal. Network: RDnet remote control RJ45 connector IN/OUT Power Socket: 1x Powercon In 1x Powercon Out Voltage Range: 90 - 240 V~

Precise directivity The DVA T8 sports constant directivity horns, HF drivers, and midrange woofers optimized to deliver a uniform 100°-by-15° coverage pattern. It makes the most of two acoustical effects to help distribute SPL evenly. One is the vector addition of individual horns’ output; the other is cylindrical wave formation. These two effects come together to create a uniform coverage pattern that is easily adapted to different venues by varying the length of the array and adjusting the splay between individual components. ¢ ¢

UNIFORM COVERAGE PATTERN EVENLY DISTRIBUTED SPL

Mechanics Housing: Polypropylen PP Metal reinforced Housing Design: Trapezoidal 15° Rain cover: Included Rigging Points: Integrated rigging hardware Width: 580 mm (23.2 in) Height: 240 mm (9.6 in) Depth: 327 mm (13.08 in) Weight: 14.2 kg (31.3 lbs)

DVA Digital Array Systems & Subs

Extended low-end performance A powerful 8” neodymium woofer, paired with a 350W power amp, covers the low frequency range with an assertive punch that reaches down to 70 Hz.

T8 LF

¢ ¢

8” NEODYMIUM WOOFER FULLRANGE CAPABILITY FROM 70 HZ UP

Accurate, awesomely efficient midrange response

T8 MF

Loaded with a custom 6.5” neodymium midrange, the DVA T8 also delivers excellent midrange response, which has such a formative influence on shaping the sonic image. The midrange is housed in a sealed chassis. Its high BL factor makes it even more responsive so that it renders transients faithfully. A phase plug feeds into a frontloaded horn tuned to achieve a uniform coverage pattern. ¢ ¢

ONE 6.5” NEODYMIUM MIDRANGE WITH A FRONTLOADED HORN SUPERIOR TRANSIENT RESPONSE

High-definition top end

TWO 1” NEODYMIUM HF DRIVERS WITH ARRAY HORN REMARKABLY TRANSPARENT RESPONSE

DVA Digital Array Systems & Subs

DVA T8 ¢

Top Performance Combined With Total Control

Extraordinary dynamic range and natural sound The DVA T8’s signal processors and AD/DA converters were engineered to achieve transcendent sound quality with great fidelity and dynamic range with 56-bit digital signal processing at a sampling rate of 96 kHz. DSPs equalize every signal path, aligning phases and time, and handle loads with digital peak, RMS, and thermal limiters to maximize operating safety, power management and performance even at threshold levels. ¢ ¢

EXCELLENT AUDIO SPECS PERFECT SYSTEM EQUALIZATION

Easy setup - configuration at the touch of a button The DVA T8’s DSP offers eight system presets that adapt the unit to its assigned task in the array. They adjust the gain structure and EQ for the near-field/midfield and far-field positions to compensate for high frequencies absorbed by air as well as for low/midrange frequency coupling as the array length increases. No further manual adjustments are necessary. All presets may be selected using the rear-mounted rotary encoder or downloaded from a PC using RDnet software. ¢ ¢

SIMPLEST SYSTEM CONFIGURATION VERY FAST SETUP

Durable yet light hybrid polypropylene enclosure This enclosure’s surface is immune to knocks and scratches and fully resistant to water and moisture. A sophisticated metal skeleton provides internal bracing that connects its component parts, reinforces the housing and soften resonance. ¢ ¢ ¢

DVA Digital Array Systems & Subs

METAL-REINFORCED POLYPROPYLENE HOUSING LIGHT YET EXCEEDINGLY DURABLE INTEGRATED RAIN PROOFING

Compact yet remarkably powerful Digipro®G2 digital power amps - compact yet remarkably powerful The DVA T8 sports three Class-D digipro® power amps, one for each signal path. Embodying the latest advance in digital high-performance amps, the digipro®’s sophisticated technology delivers more from less – that is, maximum power from a package designed to minimized weight and size. ¢ ¢

700 W/RMS HIGH PERFORMANCE AND TRANSPARENCY WITH TRUE DYNAMIC RESPONSE

SMPS with PFC for consistently superb performance The DVA T8’s power supply consists of independent networked devices. Incorporating the latest IT technology, it was engineered to maximize operating safety, efficiency, and performance. The main 750W power supply provides plenty of juice to the power amps and features PFC (power factor correction). A secondary power supply feeds the microcontrollers and the DSP, and serves to ramp up check routines and the main power supply. The smart IPOS™ (Intelligent Power-On Sequence) circuit keeps the overall system’s inrush current low. ¢ ¢

WIDE-RANGE 90-TO-240V SMPS POWER SUPPLY WITH PFC IPOS™ CIRCUIT FOR LOW INRUSH CURRENT

High reliability and operating safety The processor monitors amp’s temperature, voltage, current, impedance, input, output, and other data independently and continuously. It detects problems such as an impending overload, and attenuates the signal gradually in small steps or mutes it altogether, depending on the given temperature and level. ¢ ¢

REAL-TIME OPERATING STATUS MONITORING STATUS REPORT DELIVERY VIA THE DVA USB MANAGER

DVA Digital Array Systems & Subs

DVA T8 ¢

Top Performance Combined With Total Control

Handling, Stacking and Flying Cabinets The DVA T8 comes with built-in rigging hardware. The splay between enclosures may be adjusted in incrementally from 0° to 15°. The DRK10 harness holds up to 16 flown T4 units. At just 14.2 kg, the DVA T8 is exceptionally light so an array with six elements weighs less than 100 kg. This is an advantage greatly appreciated by everyone who handles and transports the array. A single person can rig up and fly the system, even from trusses and towers rated to handle lighter loads. ¢ ¢ ¢

VERY LIGHT POINT LOAD PRECISE ALIGNMENT DRK-10 HARNESS FLIES UP TO 16 UNITS

Compatible with DVA T12 units DVA T8 and DVA T12 series housings are acoustically and mechanically compatible. This means DVA T12 units may be flown right above a T8 array for use as far-fills. ¢

COMPATIBLE DVA T12S MAY SERVE AS FAR-FILL EXTENSIONS

DSA 4 pole mount adapter The DSA 4 pole mount adapter holds up to 3 DVA T8 modules on one pole. A set screw adjusts the tilt angle, smoothly and precisely. Compact PA systems can be configured for smaller applications simply by adding S1518N subwoofers to the setup.

DVA Digital Array Systems & Subs

8 MODULES (2 METERS ARRAY) CONNECTED TO ONE 16A PHASE

A three-way active line array system, the DVA T4 has set new standards in the sound reinforcement industry since its 2007 market launch. Better yet, it has brought the benefits of real line array technology to a much wider range of users.

PLACE JUST 125 KG LOAD ON THE PICK-POINT

Equipped with top-notch features and engineered for maximum versatility, the DVA T4 delivers premium performance and ensures excellent return on investment.

FULLY POWERED UNITS, FREELY SCALABLE TO SETUPS OF ANY SIZE LOSSLESS SIGNAL PATH WITH NO NEED FOR SPEAKER CABLES NONE OF THE IMPEDANCE AND AMP CHANNEL AVAILABILITY CONCERNS ASSOCIATED WITH PASSIVE MODELS SEQUENTIALLY CONFIGURABLE ARRAY SEGMENTS

T4 Pf C P Pf fC C

DIGITAL CONTROLLER (DSP) ONBOARD FOR UTMOST OPERATING SAFETY

Full of Technology

DVA Digital Array Systems & Subs

3-Way Active 3 Way Active Line Array Module

Line Array Modu

DVA T4 Technical Data Speaker Type: 3-Way Active Line Array Module

The DVA T4 is equipped with unique digital power amps that provide a total of 420W RMS. Driven by Digipro® technology, their resolution is several-fold that of conventional digital amps. They render signals very accurately with this high-definition audio capability. Sonic images are almost impossible to distinguish from those of analog sources, even in the HF range. The amps are equipped with high-quality delta-sigma converters.

Acoustical data Frequency Response [- 3dB]: 80 - 19.000 Hz Max SPL: One Unit: 128 dB HF: 2x1” Voice Coil HF: 1.4”MF: 1x 6.5” Type MF: Neodymium Sealed Basket Phase Plug Horn Loaded Voice Coil MF: 1.5” LF: 8” Type LF: Neodymium Voice Coil LF: 2.5” Directivity: 100x15 ° Single unit

Amplifier Amp Technology: Digipro® Amp Class: Class D HF Amp: 100 W RMS MF Amp: 100 W RMS LF Amp: 220 W RMS Cooling: Convection

Processor Controller: Analog Devices AD/DA Converter: DSP 24 bit/48 kHz System Presets: 8, HF/Low-mid correction Limiter: Dual Active Limiter Multiband RMS, Peak, Thermal Crossover Frequency MF-HF: 1800 Hz Slope MF-HF: 24 dB/Octave Crossover Frequency LF-MF: 400 Hz Slope LF-MF: 24 dB/Octave

Input Signal Input: 1x XLR fem, bal. Signal Output: 1x XLR male, bal. Power Socket: 1x PowerCon In 1x PowerCon Out Voltage Range: 90 - 240 V~

The DVA T4’s digital power amp features DPP™ (Digital Power Processing) technology and a multiband compressor/limiter with separate response curves for each signal path. Its dynamic range is exceptionally wide. For example, headroom in the middle and high-frequency bands ranges up to 22dB. This innovative circuitry not only maximizes dynamic response, it also ensures signals are rendered accurately and uniformly even at threshold levels.

Mechanics Housing: Polypropylen PP reinforced Housing Design: Trapezoidal 15° Rigging Points: Integrated rigging hardware Width: 580 mm (23.2 in) Height: 240 mm (9.6 in) Depth: 327 mm (13.08 in) Weight: 13.8 kg (30.42 lbs)

DVA Digital Array Systems & Subs

Reliability The 8” Neodymium-Woofer is equipped with a high power 2.5” voice coil to provide superior sound pressure level in a very compact size. ¢

8” VC 2.5” NEODYMIUM WOOFER

T4 LF

High Efficiency

T4 MF

The 6.5” Neodymium-Midrange speaker has a sealed basket to provide an optimized volume capacity including high sensitivity and superb sound reproduction. It also has a horn exit including phase plug for defined and linear sound emission. ¢

6.5” VC 1.5” NEODYMIUM MIDRANGE

State-of-the-Art Drivers

The build in 1” Neodymium- Drivers are equipped with a 1.4” MylarMembrane which allow a very quick response and provide a linear frequency range at a surprisingly low weight. This driver was specially designed for the use with Line-Arrays. Its compact measurements allow very close proximity which is a main factor for minimum interference. ¢

2X 1” VC 1.4” NEODYMIUM DRIVERS

Constant Directivity

The DVA T4 Top is equipped with a constant directivity horn for the High and Mid section and offers a nominal coverage angle of 100°x15°. The CD-Horn provides high flexibility and a good natured attitude if for instance the Array is not aligned correctly. The DVA uses apart from the formation of cylindrical waves (very much depending on the number of T4 elements) the vector summing of the individual horns. This means that with growing distance to the source (if set up correctly) the listener perceives more and more vector sums of the single elements. However it has to be considered, that the fewer elements are used to spread the sound to a specific area, the stronger must be the curving of them. That’s how the effect of optimised SPL distribution is managed.

DVA Digital Array Systems & Subs

DVA T4 ¢

Top Performance Combined With Total Control

Groundstacking TIn case there are no possibilities to fly the system or the ceiling of the venue is not high enough, the DRK-10 can be used for groundstacking too. A special bracket provides an inclination up to 7.5°. The DRK-10 fits exactly onto the surface of an upright positioned DVA S20 subwoofer and can be mounted by two quick release pins on top of the sub. The combination of a DVA S10 subwoofer and a DSA-4 pole mount adaptor holding up to three DVA T4 mid-/high-range units is a great solution for smaller applications and for delay zone sound reinforcement. The continuously adjustable DSA-4 adaptor lets you aim the mid-/highrange units.

Flying the cabinets The DVA T4 comes with precisely engineered flying hardware. The hardware in combination with the extremely low weight of a T4 top allows easy and fast setup of the whole system. The curving can be adjusted in steps of 2.5° within a range of 0° and 15°. For an optimum of performance the system should be principally flown. The DRK-10 flying frame holds up to 16 T4. For professional handling the frame is well balanced and the angle of inclination can be corrected with the upper rear flying rails. The DSA-4 adapter attaches to the bottom cabinet and secures the rig to the truss with half-couplers and a pipe. We recommend using this adapter to prevent the stack from twisting and swinging. The combination of DVA S10 subwoofers and DVA T4 mid-/high-range units in a flown array packs a mighty fullrange punch with serious SPL. This setup is the preferred configuration in venues where you are unable to place bass bins on the floor or where you wish to cover bleachers or balconies.

Handling, stacking, and flying the DVA T4 The DVA T4 Line-Array element has a sensational weight of only 13,8kg. The obvious advantage for handling and transport also makes flying possible where under normal circumstances the trussing is not strong enough to support also flying of the audio devices an Array of six T4 Tops therefore weighs less than 100 kg. For system dimensioning please refer to DVA Composer simulation software.

DVA Digital Array Systems & Subs

VARIABLE CROSSOVER FREQUENCIES PRECISE LIMITER FUNCTIONS

VA bass bins are loaded with state-of-the-art, high-performance D subwoofers. Equipped with powerfull woofers with voice coils with diameters up to 4“, these units‘ load handling capacity is extremely high, and their transient response is remarkably faithful. The dual ventilation system minimizes heat buildup and power compression while helping to maximize loading handling capacity and reliability.

ON BOARD DELAY FOR PERFECT TIME ALIGNMENT PRESET FOR CONFIGURING CARDIOID SYSTEMS SETTINGS ACCESSIBLE VIA A ROTARY ENCODER X-OVER OUT RDNET NETWORK PORT

The woofers feature a fiberglass-reinforced diaphragm, an exceedingly robust triple-roll surround, and a geometrically optimized cone. All this culminates in peak-to-peak excursion capabilities ranging up to 48 mm.

SUB WOOFERS Full of Technology

DVA Digital Array Systems & Subs

High Performance High Performan Subwoofer Systems

Subwoofer System

These subwoofers are driven by digipro®G2 digital power amps with up to 3000W output. Digipro®G2 technology is so very efficient that it does not require fans. With no moving parts to tend to, these amps are altogether maintenance-free. Equipped with PFC switched-mode power supplies, they are largely impervious to line voltage fluctuations, which is a tremendous asset in a touring rig. Our network-enabled DVA subwoofers are designated by an “N” in the product name. They feature a premium-quality DSP boasting excellent audio specs with variable crossover frequencies, precise limiter functions and adjustable delay settings for perfect time alignment. A special preset makes it easy to set up cardioid systems with enhanced directivity. Settings are readily adjusted using the rear-mounted rotary

encoder. The DSP also provides an X-Over output for connecting satellites (in stereo on S08 and S09 units). Factory-equipped with an RDnet port, these subwoofers are ready for integration into elaborate, remotely controlled and monitored DVA T12 sound reinforcement systems via RJ45 inputs and outputs that connect the units to the RDnet hub. Made of sturdy birch multiplex covered in robust black textured lacquer, the subwoofer housing is fronted with a rugged speaker grille. The enclosure is easy to tote with its comfortable carrying handles. Optional dust covers protect it on the go. With 16 threaded bushings each on their rear panels, the S09, S10, S30N, S1518N, 1521N and S20 bins are ready to accept Blue Wheels. Retrofitted with the appropriate fly kit, S09, S10, 1518N and 2585N subwoofers are easily rigged and flown.

High-performance bass woofers

High-performance digipro®G2 Class-D power amp

High-quality DSP and RDnet

Built tough for touring

DVA Digital Array Systems & Subs

DVA S30 N Subwoofer, 2x18” Bassreflex Horn Loaded Featuring a dual 18” subwoofer pairing in a bass reflex housing, the DVA S30 packs a muscular, ultra lowfrequency punch.

DVA S30 N Technical Data

It delivers very powerful performance indeed with a range extending down to the lowest frequencies.

Speaker Type: Active Bassreflex-Horn Subwoofer

This sub-bass powerhouse is the perfect addition to large PAs and an excellent complement to DVA T12 mid-/high-range units in stacked arrays.

Acoustical data Frequency Response [- 3dB]: 30 - 120 Hz Max SPL: 141 dB Directivity: Omnidirectional, Cardiod Option with DSP setup LF: 2x18” Voice Coil LF: 4”

Amplifier Amp Technology: Digipro® G2 Amp Class: Class D Power Supply: 3 kW SMPS with PFC LF Amp: 3000 W RMS Cooling: Convection

Processor

Bass reflex horn housing This sophisticated hybrid design brings together the benefits of bass reflex and horn systems in a compact housing engineered to render low frequencies with high SPL. The two baffle boards are arrayed in the form of a V. They guide the central bass reflex channel‘s sound energy into the horn’s port. This funneling action is smooth and uniform, greatly increasing its range. The high-quality birch multiplex housing is covered in robust black textured lacquer and equipped with eight grips. On the back is a transport dolly that removes easily via quick-release pins to keep the wheels from rattling.

Controller: DSP 56 bit AD/DA Converter: DSP 24 bit/48 kHz System Presets: X-Over,Delay Phase: 0, 180° Limiter: RMS, Peak, Thermal Delay Option: 0-4.5 ms internal Crossover Frequency LF-HF: 75-120Hz |steps of 5Hz LF-Xover out slope: 24 dB/Octave

Mechanics Housing: Multiplex birch plywood Housing Design: Rectangular Handles: 4x Per Side Accessory: Dolly, Wheels 100mm, Dust Cover, Rain Cover Rigging Points: 2xPick Points on top to fix DRK10/20 rigging frames Width: 1100 mm (44 in) Height: 580 mm (23.2 in) Depth: 720 mm (28.8 in) Weight: 83 kg (182.98 lbs)

Pf C P Pf fC C

DVA Digital Array Systems & Subs

DVA S30 N ¢ DVA S1521 N ¢

Ultra Low-Frequency Punch

DVA S1521 N

DVA S1521 N Subwoofer, 21” Bassreflex The DVA S1521 N is a powered 21” subwoofer housed in a bass reflex enclosure that we tuned for accurate, ultra low-frequency response.

Technical Data Speaker Type: Active Bassreflex-Subwoofer

It readily integrates into large DVA and DVX Series PA systems as a sub-bass unit or as a stacked subwoofer.

Acoustical data

Made of durable birch multiplex housing covered in robust black textured lacquer, the high-quality housing provides six carrying handles, an M20 pole mount, and bushings on the rear panel that accept casters. Pick-points for attaching DRK-10 and DRK-20 harnesses are built into the top panel to enable easy, safe stacking.

Frequency Response [- 3dB]: 30 - 105 Hz Max SPL: 139 dB Directivity: Omnidirectional, Cardiod Option with DSP setup LF: 21” Voice Coil LF: 4.5”

Amplifier Amp Technology: Digipro® G2 Amp Class: Class D Power Supply: 1.5 kW SMPS with PFC LF Amp: 1500 W RMS Cooling: Convection

Processor Controller: DSP 56 bit AD/DA Converter: 24bit/96 kHz System Presets: X-Over,Delay Phase: 0, 180° Limiter: RMS, Peak, Thermal Delay Option: 0-4.5 ms internal Crossover Frequency LF-HF: 60-105Hz |steps of 5Hz LF-Xover out slope: 24 dB/Octave

Mechanics

Top-notch 21” woofer Serving as the unit’s transducer is a state-of-the-art 21” woofer with 4.5” voice coil. This combination of high-quality materials and sophisticated magnetic drivers fields some pretty impressive results. Even very low bass frequencies are rendered with pinpoint precision and hairtrigger transient response, treating audiences to a breathtaking audio experience.

Housing: Multiplex birch plywood Housing Design: Rectangular Handles: 3x Per Side Accessory: Dolly, Wheels 100mm, Dust Cover, Rain Cover Pole Mount: M20 Rigging Points: 2xPick Points on top to fix DRK10/20 rigging frames Width: 580 mm (23.2 in) Height: 800 mm (32 in) Depth: 720 mm (28.8 in) Weight: 52.5 kg (115.74 lbs)

Pf C P Pf fC C

DVA Digital Array Systems & Subs

DVA S1518 N Subwoofer, 18”, Bandpass The DVA S1518 N is a bandpass subwoofer based on the DVA S10, but with 50 percent higher power amp output, an integrated DSP, and an RDnet link.

DVA S1518 N Technical Data

A remarkably versatile subwoofer, it delivers tight and punchy bass response that supports and transitions smoothly to satellites’ lower midrange frequencies.

Speaker Type: Active Bandpass Subwoofer

The DVA S1518 N is equipped with a next-generation, 18” woofer driven by a built-in 1500W digipro® G2 digital power amp.

Frequency Response [- 3dB]: 39 - 120 Hz Max SPL: 138 dB Directivity: Omnidirectional, Cardiod Option with DSP setup LF: 18” Voice Coil LF: 4”

Subwoofer arrays are easily flown using the optional SRK10 rigging hardware retrofit. The S1518 N will also serve you well in compact stacks paired with DVA T12, T8 and T4 units or DVX Series enclosures.

Acoustical data

Amplifier Amp Technology: Digipro® G2 Amp Class: Class D Power Supply: 1.5 kW SMPS with PFC LF Amp: 1500 W RMS Cooling: Convection

Processor Controller: DSP 56 bit AD/DA Converter: 24bit/96 kHz System Presets: X-Over, Delay Phase: 0, 180° Limiter: RMS, Peak, Thermal Delay Option: 0-4.5 ms internal Crossover Frequency LF-HF: 75-120Hz |steps of 5Hz LF-Xover out slope: 24 dB/Octave

Mechanics Housing: Multiplex birch plywood Housing Design: Rectangular Handles: 3x Per Side Accessory: Dolly, Wheels 100mm, Dust Cover, Rain Cover Pole Mount: M20 Rigging Points: integrated for SRK10 fly kit 2xPick Points on top to fix DRK10/20 rigging frames Width: 515 mm (20.6 in) Height: 640 mm (25.6 in) Depth: 720 mm (28.8 in) Weight: 46 kg (101.41 lbs)

Pf C P Pf fC C

DVA Digital Array Systems & Subs

DVA S1518 N ¢ DVA S2585 N ¢

Ultra Low-Frequency Punch

DVA S2585 N

DVA S2585 N Subwoofer, 18”+ 15”, Cardiod The DVA S2585 N is a compact subsystem featuring a cardioid layout designed for utmost directivity.

Technical Data

The system consists of two separate chambers, one loaded with a forward facing 18” woofer and another with a rearward facing 15” woofer. The integrated digipro®G2 digital power amps provide 2500W total output power. The high-quality DSP filters signals and controls the speakers to deliver a remarkably authentic audio image and faithful transient response.

Speaker Type: Active Cardiod-Subwoofer

Acoustical data Frequency Response [- 3dB]: 35 - 120 Hz Max SPL: 140 dB Directivity: Cardiod LF: 18”+15” Voice Coil LF: 4”

The housing is ready to fly with the optional SRK10 Rigging Kit is all it takes to put up flown cardioid sub arrays.

Amplifier Amp Technology: Digipro® G2 Amp Class: Class D Power Supply: 2.5 kW SMPS with PFC LF Amp: 2500 W RMS Cooling: Convection

Processor Controller: DSP 56 bit AD/DA Converter: 24bit/96 kHz System Presets: X-Over,Delay Phase: 0, 180° Limiter: RMS, Peak, Thermal Delay Option: 0-4.5 ms internal Crossover Frequency LF-HF:75-120Hz |steps of 5Hz LF-Xover out slope: 24 dB/Octave

Cardiod- Design Many systems lack low-frequency directivity and, as a result, are plagued by interference and annoying noise.

Mechanics

The S2825 N, in contrast, was engineered specifically for enhanced low-frequency directivity. And it not only sounds great, it is also easy to handle and transport.

Housing: Multiplex birch plywood Housing Design: Rectangular Handles: 3x Per Side Accessory: Dolly, Dust Cover, Rain Cover Pole Mount: M20 Rigging Points: integrated for SRK10 fly kit 2xPick Points on top to fix DRK10/20 rigging frames Width: 515 mm (20.6 in) Height: 640 mm (25.6 in) Depth: 1000 mm (40 in) Weight: 65 kg (143.3 lbs)

Pf C P Pf fC C

DVA Digital Array Systems & Subs

DVA S20 DP Subwoofer, 2 x 18” Bassreflex Featuring a dual 18” subwoofer pairing in a bass reflex housing, the DVA S20 delivers powerful performance, rendering frequencies as low as 25 hertz assertively and with impressive authority. It is the perfect sub-bass provider for DVA S10/T4 systems and an excellent complement to DVA T4 mid-/high-range units in stacked arrays. Thanks to the integrated Quick-Release-Pins, both DRK-10 and DRK-20 frames can be easily mounted to set up a ground stacked system.

DVA S20 DP Technical Data Speaker Type: Active Bassreflex Subwoofer

Acoustical data Frequency Response [- 3dB]: 35 - 120 Hz Max SPL: 138 dB Directivity: Omnidirectional, Cardiod Option with SDD Module LF: 2x18” Voice Coil LF: 4”

Amplifier Amp Technology: Digipro® Amp Class: Class D LF Amp: 2000 W RMS Cooling: Convection

Processor Controller: Analog Phase: 0, 180° Limiter: RMS, Peak, Thermal Delay Option: SDD Module Crossover Frequency LF-HF: 90, 120 Hz LF-Xover out slope: 24 dB/Octave

Mechanics Housing: Multiplex birch plywood Housing Design: Rectangular Handles: 4x Per Side Accessory: Wheels 100mm, Dust Cover Rigging Points: 2xPick Points on top to fix DRK10/20 rigging frames Width: 1100 mm (44 in) Height: 580 mm (23.2 in) Depth: 720 mm (28.8 in) Weight: 84 kg (185.19 lbs)

Pf C P Pf fC C

DVA Digital Array Systems & Subs

DVA S20 DP ¢ DVA S10 DP ¢

Ultra Low-Frequency Punch

DVA S10 DP

DVA S10 DP Subwoofer, 18” Bandpass The bandpass subwoofer DVA S10 is equipped with a single 18” woofer of the newest generation, driven by a 1000W digitalpower amp.

Technical Data Speaker Type: Active Bandpass Subwoofer

Using the optionally available flyware, up to two DVA S10 DP can be flown mounted to the DRK-10 rigging kit.

Acoustical data

Further the DVA S10 can be used as a compact PA system together with either 3x DVA T4 on a speaker pole or 2x DVA S10 and 4-6 DVA T4 as a Groundstack.

Frequency Response [- 3dB]: 40 - 120 Hz Max SPL: 136 dB Directivity: Omnidirectional, Cardiod Option with SDD Module LF: 18” Voice Coil LF: 4”

Amplifier Amp Technology: Digipro® Amp Class: Class D LF Amp: 1000 W RMS Cooling: Convection

Processor Controller: Analog Phase: 0, 180° Limiter: RMS, Peak, Thermal Delay Option: SDD Module Crossover Frequency LF-HF: 90, 120 Hz LF-Xover out slope: 24 dB/Octave

Cardioid setup with the SDD module

Mechanics Housing: Multiplex birch plywood Housing Design: Rectangular Color: Black, White Handles: 3x Side Pole Mount: 1x M20 Rigging Points: integrated for SRK10 fly kit 2xPick Points on top to fix DRK10/20 rigging frames Accessory: Wheels 100mm, Dust Cover, Rain Cover Width: 515 mm (20.6 in) Height: 640 mm (25.6 in) Depth: 720 mm (28.8 in) Weight: 48 kg (105.82 lbs)

A cardioid setup comprising the SDD module and two or three DVA S10 subwoofers on each side keeps levels down on stage and affords you far greater control over low-frequency coverage in the audience area. Never before has this innovative solution – which until today required much greater effort and more elaborate gear – been so easy to achieve with such professional results.

Pf C P Pf fC C

DVA Digital Array Systems & Subs

DVA S09 Subwoofer A remarkably compact 15” subwoofer in a band-pass design, the DVA S09 DP delivers true, tight, and punchy bass response. With a height of just 44 cm, it can be flown above DVA T4 modules to keep the rig‘s footprint inconspicuous. The S09 comes with two features that make it the perfect base for a highquality satellite system, for example, when paired with the DVX D10. One is an integrated active stereo crossover with two cutoff frequencies to choose from, 90Hz and 120Hz. The other is a phase inversion switch. One PowerCon socket connects to the mains power supply, while two PowerCon outputs connect satellites.

DVA S09 DP Technical Data Speaker Type: Active Bandpass Subwoofer

Acoustical data Frequency Response [- 3dB]: 45 - 120 Hz Max SPL: 134 dB Directivity: Omnidirectional LF: 15” Voice Coil LF: 4”

Amplifier Amp Technology: Digipro® Amp Class: Class D LF Amp: 1000 W RMS Cooling: Convection

Processor Controller: Analog (Stereo) Phase: 0, 180° Limiter: RMS, Peak, Thermal Delay Option: NO Crossover Frequency LF-MF: 90, 120 Hz LF-Xover out slope: 24 dB/Octave

Mechanics

SRK-09 Fly Kit Retrofitted with the optional SRK-09 fly kit, the DVA S09 DP subwoofer is easily rigged to a DRK-10 harness and flown alongside further DVA T4 mid-/ high-range units.

Housing: Multiplex birch plywood Housing Design: Rectangular Color: Black, White Handles: 2x Side Pole Mount: 1x M20 Rigging Points: 2xPick Points on top to fix DRK10/20 rigging frames Accessory: Wheels 100mm, Dust Cover, Rain Cover Width: 515 mm (20.6 in) Height: 440 mm (17.6 in) Depth: 720 mm (28.8 in) Weight: 37.5 kg (82.67 lbs)

DVA Digital Array Systems & Subs

DVA S09 DP ¢ DVA S08 DP ¢

Ultra Low-Frequency Punch

DVA S08 DP Technical Data Speaker Type: Active Bassreflex Subwoofer

Acoustical data Frequency Response [- 3dB]: 40 - 150 Hz Max SPL: 131 dB Directivity: Omnidirectional LF: 12” Voice Coil LF: 3”

S08 Subwoofer The DVA S08 DP is a remarkably compact 12” high power active bassreflex subwoofer for professional applications and to satisfy upmarket requirements. It delivers a high momentum and at the same time reproduces a punchy low end. Equipped with a 800W/RMS digipro® digital power amp including switch mode supply, this unit provides a high sound pressure level of up to 131dB. Furthermore there is a powercon in and out for mains connection.

Amplifier Amp Technology: Digipro® Amp Class: Class D LF Amp: 800 W RMS Cooling: Convection

Processor Controller: Digital + Analog (Stereo) Phase: 0, 180° Limiter: RMS, Peak, Thermal Delay Option: NO Crossover Frequency LF-MF: 90, 120 Hz LF-Xover out slope: 24 dB/Octave

Mechanics Housing: Multiplex birch plywood Housing Design: Rectangular Handles: 1x on top Pole Mount: 2x M20 Accessory: Dust Cover Width: 360 mm (20.8 in) Height: 520 mm (14.4 in) Depth: 500 mm (20 in) Weight: 23 kg (50.71 lbs)

DVA Digital Array Systems & Subs

MOTORIZED FLYBAR ACCELEROMETER ON BOARD REAL TIME DATA USING RDNET SOFTWARE MANUAL REMOTE CONTROL SAME WEIGHT CAPACITY OF DRK-20 EXTREMELY ACCURATE 0,5° AIMING RESOLUTION

Motorized Rigging Frame

The new DRK20M is the first motorized fly bar in the world for line array systems. Equipped with a system that modifies the clusters focal point, it is possible to adjust the inclination of the sound system in any moment without having to lower the loudspeakers; this makes it possible to change the sound coverage, when necessary, even during the event. This system can be directed from RDNet or by simply using a manual remote control connected with a standard XLR cable.

DRK 20M Full of Technology

The new DRK20M is also equipped with an RDNet interface, in order to control each of its functions through a computer and monitor its position in real time. The new motorized flybar is also very useful in facilitating the installation of line array modules by adjusting the clusters inclination progressively, as each single modules’ applied angles vary. Thanks to its solid structure in special steel, it is possible to hang speakers of the DVA series with a weight of up to 1000 kg, TUV certified.

0°

DVA Digital Array Systems & Subs

Accessories Accessories for DVA Systems

for DVA Systems

CABLES

M2M

M2S

T12

RJ45-RJ45-150

RJ45-RJ45-75

RJ45-XLR M

RJ45-XLR F

S30N

S1521N

S1518N

S2585N

AFL 05 DCK 45

DCK 27

DCK 15

DPC 15

DAC 15

DRK-M5

DSA-M2

WHEELS

S09 DP

DRK-20

DRK-10

DWB 3

DSA 4

DS2

SRK-09

SRK-09W

DT-6

ADT-6

ADT-8-MINI

l l

DO 218

RC MS12-SUBH

DWK 20

RC M2

S08

DO 18

l l l

DRP T4

DRP S30

COVERS

S10 DP

DRK-20M

SRK-10

DRP S15

DRP S10

TC 20S

TC 09S

TC 08S ADTF-2

ADTF-3

DTF 4

DVA Digital Array Systems & Subs

TC 10S

FLIGHT CASE

S20 DP

DS2-S

INSTALLATION

MS12

DVX DM12 TH DVX DM15 TH DVX D8 HP DVX D10 HP DVX D12 HP DVX D15 HP DVX DM28 DVX DM12 DVX DM15

Digital

Active Speakers

DVX Digital Active Speakers

2-Way Power Way Power 2 Active Speakers

Active Speakers

The DVX series combines dBTechnologies’ new digipro®G2 power amp technology and state-of-theart transducers to raise the bar several notches for sound pressure, performance, and response. Boasting an impressive feature set comprising high quality input board, multifunctional birch multiplex housings equipped with rigging points and rails, flexible configuration options, and an unrivalled price-to-performance ratio, DVX systems are discerning professionals’ go-to solutions for a vast range of applications. Alongside the four multifunctional two-way systems, the DVX line also comprises the three DM28, DM12, and DM15 low-profile stage monitors. All models feature high-quality loudspeaker chassis, Innovative, high-performance dBTechnologies digipro®G2 power amps deliver impressive 900W each to drive these advanced speakers.

Versatile and robust

DVX Multifunctional Systems

High-quality speaker components

Entire Active System Design EASD™

DVX Digital Active Speakers

Specially designed, rotatable high-frequency horns provide very clean and constant directivity. All highfrequency horns are made of aluminum to help keep their drivers cool. The integrated DSP carries out various tasks involved in controlling digipro®G2 power amps, serving as an active equalizer, x-over, high-pass filter, as well as performing audio setup tasks, aligning phases and delay time, and controlling the limiter to ensure utmost reliability and operating safety. All DVX Series models come in a professionalgrade birch multiplex housing equipped with PowerCon mains connectors and a rugged metal grille backed withlaminated acoustic foam rubber. D12 HP and D15 HP models feature high-quality aluminum grips, a pole mount, and a rigging system. DM12 and DM15 monitors are also equipped with a pole mount.

1500W RMS DIGIPRO™ CLASS-D AMPLIFIERS STATE-OF-THE-ART NEODYMIUM TRANSDUCERS ROTATABLE FRONTAL PANEL (LEFT-RIGHT CONFIGURATION) DOUBLE EQ PRESET ON-BOARD INPUT AND OUTPUT PANELS ON BOTH SIDES SMPS WITH ACTIVE PFC (FROM 100V~ TO 240V~)

DVX DM TH: it’s not just an upgrade of the well-known series DVX DM digital monitors, it is rather a brand new line. These products are exclusively aimed at fulfill the requirements of musicians and stage engineers. The DVX TH series is equipped with neodymium heavy-duty woofers, 12” or 15”, with 4” voice coil. Beside it features top-class neodymium compression drivers, 1500W RMS Digipro™ amplifiers and Switched Mode Power Supply with PFC. The products’ features provide the musicians with an excellent listening, even on the most demanding and loud stages. DVX TH ensures a sound quality and intelligibility without compromise. The models DVX DM12 TH and DM15 TH can reach elevate SPL levels, maintaining both a linear response and an impressive punch. At the same time it will keep unaltered the DVX DM’s typical dimensions and versatility.

DM12 TH DM15 TH Full of Technology Pf C P Pf fC C

DVX Digital Active Speakers

Professional Professional Stage Monitors

Stage Monitors DVX DM12 TH

DVX DM15 TH

Technical Data

Speaker Type: 2-way Active Stage Monitor

Acoustical data

Frequency Response [- 6dB]: 63 - 16.000 Hz Frequency Response [- 10dB]: 59 - 18.000 Hz Max SPL: 136 dB HF: 1.4” Type HF: Neodymium Voice Coil HF: 3” Horn: Aluminum rotatable horn LF: 12” Type LF: Neodymium Voice Coil LF: 4” Directivity: 90x40°

Frequency Response [- 6dB]: 55 - 16.000 Hz Frequency Response [- 10dB]: 47 - 18.000 Hz Max SPL: 136 dB HF: 1.4” Type HF: Neodymium Voice Coil HF: 3” Horn: Aluminum rotatable horn LF: 15” Type LF: Neodymium Voice Coil LF: 4” Directivity: 90x40°

Amplifier

Amp Technology: Digipro® G2 Amp Class: Class D Power RMS: 1500 W Peak Power: 3000 W LF: 750 W RMS @4 Ohm HF: 375 W RMS @8 Ohm Cooling: Single fan

Processor

Controller: DSP 56 bit AD/DA Converter: 24 bit/48 kHz System Presets: Flat EQ, TH EQ Limiter: Dual active, Multiband, RMS/Peak, Thermal Crossover Frequency LF-HF: 1070 Hz Slope LF-HF: 24 dB/Octave

Mechanics

Housing: Multiplex birch plywood - Polyurea painting Advanced features: Rotatable front panel (left or right monitor customization) Angles Up: 35°, 55° Handles: 1x left side, 1x right side Width: 670 mm (26.4 in) Height: 325 mm (12.8 in) Depth: 405 mm (15.9 in) Weight: 24.5 kg (54 lbs)

Housing: Multiplex birch plywood - Polyurea painting Advanced features: Rotatable front panel (left or right monitor customization) Angles Up: 35°, 55° Handles: 1x left side, 1x right side Width: 735 mm (28.9 in) Height: 355 mm (14 in) Depth: 447 mm (17.6 in) Weight: 28.5 kg (62.8 lbs)

DVX Digital Active Speakers

An incredible output A masterpiece of power, quality and Italian design. The DVX DM TH’s monitors are the outcome of the collaboration between some of the most important touring professionals and dBTechnologies R&D staff. As a result of this synergy, these products feature acoustic responses and performances that suit the most prestigious stages of the international scene. Thanks to an incredibly high SPL, considering its dimensions, the TH is suitable for every circumstance; beside, its frequency response can be regulated trough two preset equalizations: Flat EQ and TH EQ.

The DM12 TH and DM15 TH monitors feature the phase plug technology, providing a correction of the phase and frequency response of the 12’’ (or 15’’) woofer. The results are a coherent horizontal coverage and a great definition of the mid-frequencies. The stage monitors have a multiplex birch plywood, painted with polyurea, in order to guarantee excellent touring-proof resistance and durability.

DVX Digital Active Speakers

DVX DM12 TH ¢ DVX DM15 TH ¢

Power. Unleashed.

Left or right in a flash The DVX DM TH offers a unique feature that is functional to meet the requirements of the most exigent professionals. In few minutes, you can regulate the monitor’s orientation, rotating the whole frontal panel. The internal geometry of the speaker will be so inverted, moving the horn from the left side to right side, or vice versa. It is now possible to consistently couple two adjacent monitors’ HF horns and avoid comb filters.

You will be able to discern if a monitor is in a right or left configuration in every moment. Despite the grid has been remounted, a logo will indicate the internal disposition of the transducers. For a vertical usage (like a drumfill system), it is also possible to rotate the monitor’s CD aluminum horn, in order to optimize the speaker’s dispersion and adapting it to the new configuration.

Hidden handles and floor coupling The innovative positioning of the connectors’ panels makes the wiring even more intuitive. Having the inputs (PowerCon and XLR) on one side and the links on the other one (PowerCon and XLR ), the stage will be orderly, without any cable visible. Beside, this disposition enables the positioning of the adjacent monitors, without any space between the two boxes. As a result, the coupling effect as well as the stage look - will be optimized.

DVX Digital Active Speakers

DVX D8 HP

DVX D10 HP

Technical Data

Speaker Type: 2-Way Active Speaker

Acoustical data

Frequency Response [- 10dB]: 75 - 20.000 Hz Frequency Response [- 3dB]: 100 - 19.000 Hz Max SPL: 125 dB HF: 1” Voice Coil HF: Titanium 1.7” Directivity: 90x70° Horn: CD Horn Aluminium Rotatable Horn: YES LF: 8” Voice Coil LF: 2”

Frequency Response [- 10dB]: 70 - 20.000 Hz Frequency Response [- 3dB]: 85 - 19.000 Hz Max SPL: 127 dB HF: 1” Voice Coil HF: Titanium 1.7” Directivity: 90x70° Horn: CD Horn Aluminium Rotatable Horn: YES LF: 10” Voice Coil LF: 2.5”

Amplifier

Amp Technology: Digipro® G2 Amp Class: Class D Power RMS: 400 W Peak Power: 800 W

Amp Technology: Digipro® G2 Amp Class: Class D Power RMS: 600 W Peak Power: 1200 W

Processor

Controller: DSP 24 Bit/48 kHz System Presets: Flat, Monitor Limiter: RMS, Peak. Thermal, Multiband Crossover Frequency MF-HF: 1800 Hz

Controller: DSP 24 Bit/48 kHz System Presets: Flat, Monitor Limiter: RMS, Peak. Thermal, Multiband Crossover Frequency MF-HF: 1600 Hz

Mechanics

Housing: Multiplex birch plywood Housing Design: Multifunctional Angles Up: Monitor use 45° Rigging Points: 6x M8 2x 10mm Quick Release for DTF-bracket Width: 250 mm (10 in) Height: 425 mm (17 in) Depth: 260 mm (10.4 in) Weight: 9.7 kg (21.38 lbs)

Housing: Multiplex birch plywood Housing Design: Multifunctional Angles Up: Monitor use 45° Rigging Points: 6x M8 2x 10mm Quick Release for DTF-bracket Flytracks: 3x on top 3x on bottom Width: 290 mm (11.6 in) Height: 510 mm (20.4 in) Depth: 310 mm (12.4 in) Weight: 15.8 kg (34.83 lbs)

DVX Digital Active Speakers

DVX D8 HP ¢ DVX D10 HP ¢ DVX D12 HP ¢ DVX D15 HP ¢

Power. Unleashed.

DVX D12 HP

DVX D15 HP

Technical Data

Speaker Type: 2-Way Active Speaker

Acoustical data Frequency Response [- 10dB]: 55 - 20.000 Hz Frequency Response [- 3dB]: 68 - 19.000 Hz Max SPL: 131 dB HF: 1.4” Voice Coil HF: 2.5” Directivity: 60x40° Horn: CD Horn Aluminium Rotatable Horn: YES LF: 12” Voice Coil LF: 3”

Amplifier Amp Technology: Digipro® G2 Amp Class: Class D Power RMS: 700 W Peak Power: 1400 W

Acoustical data Frequency Response [- 10dB]: 49 - 20.000 Hz Frequency Response [- 3dB]: 57 - 19.000 Hz Max SPL: 132 dB HF: 1.4” Voice Coil HF: Titanium 2.5” Directivity: 60x40° Horn: CD Horn Aluminium Rotatable Horn: YES LF: 15” Voice Coil LF: 3.5”

Amplifier Amp Technology: Digipro® G2 Amp Class: Class D Power RMS: 700 W Peak Power: 1400 W

Processor Processor Controller: DSP 24 Bit/48 kHz System Presets: Flat, Monitor Limiter: RMS, Peak. Thermal, Multiband Crossover Frequency MF-HF: 1350 Hz

Controller: DSP 24 Bit/48 kHz System Presets: Flat, Monitor Limiter: RMS, Peak. Thermal, Multiband Crossover Frequency MF-HF: 1320 Hz

Mechanics Mechanics Housing: Multiplex birch plywood Housing Design: Multifunctional Angles Up: Monitor use 45° Rigging Points: 6x M10 4x Quick-Release Pins Flytracks: 3x on top 3x on bottom Width: 370 mm (14.8 in) Height: 625 mm (25 in) Depth: 395 mm (15.8 in) Weight: 27.5 kg (60.63 lbs)

DVX Digital Active Speakers

Housing: Multiplex birch plywood Housing Design: Multifunctional Angles Up: Monitor use 45° Rigging Points: 6x M10 4x Quick-Release Pins Flytracks: 3x on top 3x on bottom Width: 430 mm (17.2 in) Height: 690 mm (27.6 in) Depth: 450 mm (18 in) Weight: 30.3 kg (66.8 lbs)

Pf C P Pf fC C

DVX DM28 Technical Data

Stage Monitor

Speaker Type: 2-Way Active Stage Monitor

Unlike conventional multifunctional speakers, the DVX DM is a prograde performer developed specifically for use as a floor monitor.

Acoustical data

Optimized to resist feedback even at extremely high levels, it delivers the true-to-nature response and dynamic balance that today’s artists demand.

Frequency Response [- 10dB]: 60 - 20.000 Hz Frequency Response [- 3dB]: 70 - 19.000 Hz Max SPL: 130 dB HF: 1” Type HF: Neodymium Compression Driver Voice Coil HF: Titanium 1.75” Directivity: 90x60/40° Horn: Asymmetrical LF: 2x8” Type LF: Neodymium Voice Coil LF: 2.5”

Amplifier The integrated digipro® digital power amps deliver the requisite output. The switched mode power supplies with PFC ensure touring rigs get all the juice they need to perform at their peak even when a venue’s mains power is weak and voltage is low. The onboard controller encompasses an active equalizer, active x-over including phase and time alignment, limiters, and switchable system presets that adapt the monitor’s performance to suit the given application. Made of rugged multiplex and coated with tough black lacquer, the cabinet sets up at two different angles.

Amp Technology: Digipro® Amp Class: Class D Power RMS: 750 W Peak Power: 1500 W Cooling: Convection

Processor Controller: DSP 24 Bit/48 kHz System Presets: Flat, Monitor Limiter: RMS, Peak. Thermal, Multiband Crossover Frequency MF-HF: 1600 Hz Slope MF-HF: 24 dB/Octave

Mechanics

Specially designed, rotatable high-frequency horns provide very clean and constant directivity. By rotating the horn, the directivity of high frequencies can adjusted, intepended if the cabinet is mounted horizontally or vertically.

Housing: Multiplex birch plywood Housing Design: Low Profile Multifunctional Angles Up: 30°, 60° Width: 480 mm (19.2 in) Height: 265 mm (10.6 in) Depth: 418 mm (16.72 in) Weight: 14 kg (30.86 lbs)

A great and professional feature for fixed install purposes or when a multifuntional speaker is used as stage monitor.

DVX Digital Active Speakers

DVX DM28 ¢ DVX DM12 ¢ DVX DM15 ¢

Power. Unleashed.

DVX DM12

DVX DM15

Technical Data

Speaker Type: 2-Way Active Stage Monitor

Acoustical data

Frequency Response [- 10dB]: 55 - 20.000 Hz Frequency Response [- 3dB]: 68 - 19.000 Hz Max SPL: 131 dB HF: 1.4” Type HF: Neodymium Compression Driver Voice Coil HF: Titanium 2.5” Directivity: 40x90° Horn: CD Horn Aluminium Rotatable Horn: YES LF: 12” Type LF: Neodymium Voice Coil LF: 3”

Frequency Response [- 10dB]: 50 - 20.000 Hz Frequency Response [- 3dB]: 59 - 19.000 Hz Max SPL: 132 dB HF: 1.4” Type HF: Neodymium Compression Driver Voice Coil HF: Titanium 2.5” Directivity: 60x40° Horn: CD Horn Aluminium Rotatable Horn: YES LF: 15” Type LF: Neodymium Voice Coil LF: 3.5”

Amplifier

Amp Technology: Digipro® Amp Class: Class D Power RMS: 750 W Peak Power: 1500 W Cooling: Convection

Processor

Controller: DSP 24 Bit/48 kHz System Presets: Flat, Monitor Limiter: RMS, Peak. Thermal, Multiband Crossover Frequency MF-HF: 1350 Hz Slope MF-HF: 24 dB/Octave

Controller: DSP 24 Bit/48 kHz System Presets: Flat, Monitor Limiter: RMS, Peak. Thermal, Multiband Crossover Frequency MF-HF: 1320 Hz Slope MF-HF: 24 dB/Octave

Mechanics

Housing: Multiplex birch plywood Housing Design: Multifunctional Angles Up: 35°, 55° Rigging Points: 6x M10 4x Quick-Release Pins Width: 660 mm (14.8 in) Height: 305 mm (25 in) Depth: 378 mm (15.8 in) Weight: 17.5 kg (55.12 lbs)

Housing: Multiplex birch plywood Housing Design: Low Profile Multifunctional Angles Up: 35°, 55° Rigging Points: 6x M8 Width: 734 mm (29.36 in) Height: 338 mm (13.52 in) Depth: 442 mm (17.68 in) Weight: 21 kg (46.3 lbs)

DVX Digital Active Speakers

SIGMA S215 SIGMA S115 SIGMA S118

Digital Active

Speakers & Sub

SIGMA Digital Active Speakers & Subs

Quasi 3-Way Quasi 3-Way Active Speakers

Active Speakers

SIGMA S215 Technical Data Speaker Type: Quasi 3-Way Active Speaker

Quasi 3-Way Active Speaker 2 x 15”/1.4”, 1400 W

Acoustical data

Many venues demand high SPL and low-ranging response. However, a fullrange enclosure is often the only viable option for some of these applications. Loaded with two 15” woofers designed to handle considerable loads, the S215 is the solution of choice for such scenarios.

Frequency Response [- 10dB]: 42 - 20.000 Hz Max SPL: 139 dB HF: 1.4” Type HF: Titanium Compression driver Voice Coil HF: 2.8” Directivity: 60 x 40° Horn: CD Horn LF: 2x15” (with phase plug) Voice Coil LF: 3”

Amplifier Amp Technology: Digipro® G2 Amp Class: Class D Power PRG: 1400 W Peak Power: 2800 W

Processor Controller: DSP 24bit/48kHz System Presets: Flat, Boost Limiter: Dual Active Peak, RMS, Thermal Crossover Frequency MF-HF: 1100 Hz Slope MF-HF: 24 dB/Octave

Mechanics Housing: Multiplex with H.E.T coating, reinforced Width: 509 mm (20.36 in) Height: 1215 mm (48.6 in) Depth: 533 mm (21.32 in) Weight: 50 kg (110.23 lbs)

S118 + S215

H.E.T™ Housing Exceptionally light and remarkably rugged Developed by dBTechnologies, H.E.T (Hyprid Enclose Technology) housings are made of premium quality multiply wood with a hardwearing, durable, and scratch-resistant coating. Tough, rugged plastic side panels provide excellent protection for the housing as well as integrated grips and electrical connectors for utmost handling convenience and safety.

SIGMA Digital Active Speakers & Subs

SIGMA S115 Technical Data

2-Way Active Speaker 15”/1.4”, 1000 W

Speaker Type: 2-Way Active Speaker

This active 15”/1.4” two-way system is musicians and DJs’ first choice in a fullrange FOH speaker. The S115’s reach is remarkable thanks to its assertive midrange, prominent top end, and constant directivity at high sound pressure levels.

Acoustical data Frequency Response [- 10dB]: 46 - 20.000 Hz Max SPL: 133 dB HF: 1.4” Type HF: Titanium Compression driver Voice Coil HF: 2.8” Directivity: 60 x 40° Horn: CD Horn Rotable Horn: YES LF: 15” Voice Coil LF: 3”

Amplifier Amp Technology: Digipro® G2 Amp Class: Class D Power PRG: 1000 W Peak Power: 2000 W

Processor Controller: DSP 24bit/48kHz System Presets: Flat, Boost Limiter: Dual Active Peak, RMS, Thermal Crossover Frequency MF-HF: 1100 Hz Slope MF-HF: 24 dB/Octave

Mechanics

2X S118 + S115

Housing: Multiplex with H.E.T coating, reinforced Width: 509 mm (20.36 in) Height: 765 mm (30.6 in) Depth: 533 mm (21.32 in) Weight: 33 kg (72.75 lbs)

Digital processing for professional sound through and through The integrated digital sound processor allows the final touches to be made to your sound, rounding it out to a warm, natural tone with powerful bass and sparkling high frequencies. A variety of signal processing presets allows you to achieve your perfect sound with the minimum of fuss. All in all, the SIGMA series is a fully integrated range of products for professional use, setting a new standard in the field of live amplification and quite unique amongst its competitors.

SIGMA Digital Active Speakers & Subs

SIGMA S115 ¢ SIGMA S118 ¢

A New Way For Professional Sound

SIGMA S118 Technical Data Speaker Type: Active Bassreflex Subwoofer

Active Subwoofer 18”, 1400 W

Acoustical data

The S118 is a powerful, active 18” subwoofer housed in a bassreflex enclosure. Designed specifically to provide low-frequency support for highperformance S115 fullrange speakers, it packs a mighty low-ranging bass punch. S118 and S115 enclosures have the same width so they are easily stacked to set up professional-grade PA systems.

Frequency Response [- 10dB]: 32 - 110 Hz Max SPL: 134 dB HF: 1.4” Directivity: omnidirectional LF: 18” Voice Coil LF: 4”

Amplifier Amp Technology: Digipro® G2 Amp Class: Class D Power PRG: 1400 W Peak Power: 2800 W

SIGMA

S118

Processor Controller: Analog/Digital Limiter: Peak, RMS, Thermal Crossover Frequency: 80-100 Hz (Switchable) LF-Xover out slope: 24 dB/Octave

Input

OLOGIE TECHN

TECHNOLOGI

SIGMA

S118

Signal Input: XLR Input Sensitivity [dBu]: -3dBu Signal Output: 1x XLR X-Over Out/ Link Out

ES OLOGI TECHN

Mechanics Housing: Multiplex with H.E.T coating, reinforced Width: 509 mm (20.36 in) Height: 815 mm (32.6 in) Depth: 533 mm (21.32 in) Weight: 38 kg (83.78 lbs)

TECHNOLOGI

S118 + S115

Engineered for portability Musicians and DJs who provide their own backline need a reliable sound system that sets up in a flash and is easily tweaked without a lot of fuss It has to respond directly and predictably to every mix. Live acts need resilient speakers with lots of load handling capacity and the staying power necessary to operate at high levels for hours on end. The rig has to deliver tight, punchy bass response that gets people dancing as well as assertive mids and a sparkling top end. And it has to be easy to handle. The SIGMA line does all this and more.

SIGMA Digital Active Speakers & Subs

FLEXSYS F8 FLEXSYS F10 FLEXSYS F12 FLEXSYS F15 FLEXSYS F212 FLEXSYS F315 FLEXSYS FM8 FLEXSYS FM10 FLEXSYS FM12

Digital Active

Speakers & Monitors

FLEXSYS Digital Active Speakers & Monitors

-Way 2-Way Active 2 Active Speakers & Monitors

Speakers & Monitors FLEXSYS F8

FLEXSYS F10

Technical Data

Speaker Type: 2-Way Active Speaker

Acoustical data

Frequency Response [- 10dB]: 75 - 20.000 Hz Frequency Response [- 3dB]: 90 - 19.000 Hz Max SPL: 121 dB HF: 1” Type HF: Neodymium compression driver Directivity: 90/40 x 60° Horn: Asymmetrical CD Horn LF: 8”

Amplifier

Amp Technology: Digipro® Amp Class: Class D Power PRG: 400 W Peak Power: 800 W

Processor

Controller: DSP 24bit/48kHz System Presets: Flat, Processed Limiter: Dual Active Peak, RMS, Thermal Crossover Frequency LF-HF: 2100 Hz Slope MF-HF: 24 dB/Octave

Mechanics

Housing: Multiplex Angles Up: Monitor use 40° Width: 260 mm (10.4 in) Height: 420 mm (16.8 in) Depth: 260 mm (10.4 in) Weight: 9.5 kg (20.9 lbs)

FLEXSYS Digital Active Speakers & Monitors

FLEXSYS F12

FLEXSYS F15

Technical Data

Speaker Type: 2-Way Active Speaker

Acoustical data

Frequency Response [- 10dB]: 65 - 20.000 Hz Frequency Response [- 3dB]: 75 - 19.000 Hz Max SPL: 127 dB Type HF: 1” Compression driver Directivity: 90 x 40° Horn: CD Horn Rotable Horn: YES LF: 12”

Frequency Response [- 10dB]: 55 - 20.000 Hz Frequency Response [- 3dB]: 60 - 19.000 Hz Max SPL: 128 dB Type HF: 1” Compression driver Directivity: 90 x 40° Horn: CD Horn Rotable Horn: YES LF: 15”

Amplifier

Amp Technology: Digipro® Amp Class: Class D Power PRG: 800 W Peak Power: 1600 W

Processor

Controller: DSP 24bit/48kHz System Presets: Flat, Processed Limiter: Dual Active Peak, RMS, Thermal Crossover Frequency LF-HF: 1300 Hz

Controller: DSP 24bit/48kHz System Presets: Flat, Processed Limiter: Dual Active Peak, RMS, Thermal Crossover Frequency LF-HF: 1800 Hz

Mechanics

Housing: Multiplex Angles Up: Monitor use 45° Width: 360 mm (14.4 in) Height: 610 mm (24.4 in) Depth: 360 mm (14.4 in) Weight: 16.5 kg (36.38 lbs)

Housing: Multiplex Angles Up: Monitor use 45° Width: 430 mm (16.9 in) Height: 680 mm (26.7 in) Depth: 430 mm (16.9 in) Weight: 20 kg (44.09 lbs)

FLEXSYS Digital Active Speakers & Monitors

FLEXSYS F12 ¢ FLEXSYS F15 ¢ FLEXSYS F212 ¢ FLEXSYS F315 ¢

Adapts To Anything

FLEXSYS F212

FLEXSYS F315

Technical Data

Speaker Type: Quasi 3-Way Active Speaker

Acoustical data

Frequency Response [- 10dB]: 50 - 20.000 Hz Frequency Response [- 3dB]: 65 - 19.000 Hz Max SPL: 132 dB Type HF: 1” neodymium compression driver Directivity: 60 x 40° Horn: CD Horn Rotable Horn: YES LF: 2x12” (with phase plug)

Frequency Response [- 10dB]: 47 - 20.000 Hz Frequency Response [- 3dB]: 60 - 19.000 Hz Max SPL: 131 dB Type HF: 1” compression driver Directivity: 90 x 40° Horn: CD Horn Rotable Horn: NO MF: 6.5” Type MF: Hornloaded LF: 15”

Amplifier Amp Technology: Digipro® Amp Class: Class D Power RMS: 1000 W Peak Power: 2000 W

Processor Controller: DSP 24bit/48kHz System Presets: Flat, Clustered Limiter: Dual Active Peak, RMS, Thermal Crossover Frequency LF-HF: 1800 Hz

Mechanics Housing: Multiplex Width: 360 mm (14.4 in) Height: 930 mm (37.2 in) Depth: 500 mm (20 in) Weight: 31.5 kg (69.45 lbs)

FLEXSYS Digital Active Speakers & Monitors

Amplifier Amp Technology: Digipro® Amp Class: Class D Power RMS: 1000 W Peak Power: 2000 W

Processor Controller: DSP 24bit/48kHz System Presets: Flat, Processed Limiter: Dual Active Peak, RMS, Thermal Crossover Frequency LF-HF: 1800 Hz

Mechanics Housing: Multiplex Width: 440 mm (17.3 in) Height: 880 mm (34.6 in) Depth: 500 mm (20 in) Weight: 31 kg (68.34 lbs)

PACK

FLEXSYS FM8 Technical Data

Active Coaxial Stage Monitors

Speaker Type: 2-Way Active Coaxial Stage Monitor

A revolution in live sound reinforcement, the Flexsys FM Series comprises a range oftailored monitoring solutions featuring innovative technologies.

Acoustical data

Housed in compact multifunctional enclosures, these units raise the bar for intelligibility, definition, and ease of use. They are the discerning user’s first choice when nothing less than the best on-stage monitoring will do.

Frequency Response [- 3dB]: 77 - 20.000 Hz Max SPL: 117 dB HF: 1” Type HF: compression driver Horn: CD Horn LF: 8”

Amplifier

Remarkably resistant to feedback These newly developed coaxial speakers deliver extraordinary sound quality that defies the compact design of their housings. Engineered for precise directivity and uniform throw patterns, they provide the same satisfying audio experience at every listening position, with far greater resistance to feedback.

DSP with eight presets for easy adaptation to varying requirements

Amp Technology: Digipack™ Amp Class: Class D Power PRG: 200 W Peak Power: 400 W

Processor Controller: DSP 24bit/48kHz System Presets: 8 presets Limiter: Dual Active Peak, RMS, Thermal

Mechanics Housing: Multiplex with H.E.T coating, reinforced Housing Design: Multifunctional, Low Profile Angles Up: 2 monitor angles° Width: 280 mm (11.2 in) Height: 290 mm (11.6 in) Depth: 410 mm (16.4 in) Weight: 9.8 kg (21.61 lbs)

FM Series monitors feature a powerful DSP that offers a crossover, digital multiband limiters, phase correction, and eight variable presets that serve to adapt the monitor to the varying demands of vocalists, instrumentalists, and audio playback applications.

FLEXSYS Digital Active Speakers & Monitors

FLEXSYS FM8 ¢ FLEXSYS FM10 ¢ FLEXSYS FM12 ¢

Adapts To Anything

FLEXSYS FM10

FLEXSYS FM12

Technical Data

Speaker Type: 2-Way Active Coaxial Stage Monitor

Acoustical data

Frequency Response [- 3dB]: 72 - 20.000 Hz Max SPL: 120 dB HF: 1” Type HF: compression driver Horn: CD Horn LF: 10”

Frequency Response [- 3dB]: 67 - 20.000 Hz Max SPL: 126 dB HF: 1” Type HF: compression driver Horn: CD Horn LF: 12”

Amplifier

Amp Technology: Digipack™ Amp Class: Class D Power PRG: 400 W Peak Power: 800 W

Amp Technology: Digipack™ Amp Class: Class D Power PRG: 600 W Peak Power: 1200 W

Processor

Controller: DSP 24bit/48kHz System Presets: 8 presets Limiter: Dual Active Peak, RMS, Thermal

Mechanics

Housing: Multiplex with H.E.T coating, reinforced Housing Design: Multifunctional, Low Profile Angles Up: 2 monitor angles° Width: 370 mm (14.8 in) Height: 290 mm (11.6 in) Depth: 410 mm (16.4 in) Weight: 12.8 kg (28.22 lbs)

Housing: Multiplex with H.E.T coating, reinforced Housing Design: Multifunctional, Low Profile Angles Up: 2 monitor angles° Width: 450 mm (19.6 in) Height: 290 mm (11.6 in) Depth: 410 mm (16.4 in) Weight: 17 kg (37.48 lbs)

FLEXSYS Digital Active Speakers & Monitors

OPERA 710 BL OPERA 712 BL OPERA 715 BL OPERA 910 BL OPERA 912 BL OPERA 915 BL

Professional

Active Speakers

OPERA BLACK LINE Professional Active Speakers

Professional Professional Active Speakers

Active Speakers

The new Opera Black Line series treasures all the tecnological innovations of the Opera DX family with an original Full Grille look which allows greater air volume inside the box, benefiting low frequency response. The new and captivating front is backed up by the revision of the controls’ firmware which optimizes the system, offering the maximum for a polypropylene reinforced speaker. Available in two series, 700 or 900 watt with a 12 or 15 inches woofer, for every need.

Engineered to exceed expectations

Two different equalizations

Metal steel grille 1.2 mm

Foam on backside

Reinforced polypropylene

3 Handles: 2 on the side and 1 on top

Asymmetrical Horn

Monitor Angle 43°

dB TECH NO LOGI ES

OPERA BLACK LINE Professional Active Speakers

Series

OPERA 710 BL

OPERA 712 BL

OPERA 715 BL

Technical Data

Speaker Type: 2-Way Active Speaker

Acoustical data

Frequency Response [- 10dB]: 61 - 20.000 Hz Frequency Response [- 3dB]: 70 - 19.000 Hz Max SPL: 127 dB HF: 1” Type HF: Compression driver Directivity: 80/65 x 60° Horn: Asymmetrical CD Horn LF: 10”

Frequency Response [- 10dB]: 59 - 20.000 Hz Frequency Response [- 3dB]: 68 - 19.000 Hz Max SPL: 128 dB HF: 1” Type HF: Compression driver Directivity: 80/65 x 60° Horn: Asymmetrical CD Horn LF: 12”

Frequency Response [- 10dB]: 49 - 20.000 Hz Frequency Response [- 3dB]: 59 - 19.000 Hz Max SPL: 129 dB HF: 1” Type HF: Compression driver Directivity: 80/65 x 60° Horn: Asymmetrical CD Horn LF: 15”

Amplifier

Amp Technology: digipro®G2 Amp Class: Class D Power PRG: 700 Watt

Processor

Controller: DSP 24bit/48kHz System Presets: Flat, Processed Limiter: Dual Active Peak, RMS, Thermal

Mechanics

Housing: Polyporpylen PP Angles Up: Monitor use 43° Width: 343 mm (13.72 in) Height: 553 mm (22.12 in) Depth: 304 mm (12.16 in) Weight: 11.6 kg (24.25 lbs)

Housing: Polyporpylen PP Angles Up: Monitor use 43° Width: 432 mm (17.28 in) Height: 655 mm (26.2 in) Depth: 353 mm (14.12 in) Weight: 15.9 kg (35.05 lbs)

Housing: Polyporpylen PP Angles Up: Monitor use 43° Width: 432 mm (17.28 in) Height: 655 mm (26.2 in) Depth: 353 mm (14.12 in) Weight: 16.4 kg (36.15 lbs)

OPERA BLACK LINE Professional Active Speakers

OPERA 710 BL ¢ OPERA 712 BL ¢ OPERA 715 BL ¢ OPERA 910 BL ¢ OPERA 912 BL ¢ OPERA 915 BL ¢

All Black For A Legend

OPERA 910 BL

OPERA 912 BL

OPERA 915 BL

Technical Data

Speaker Type: 2-Way Active Speaker

Acoustical data

Frequency Response [- 10dB]: 60 - 20.000 Hz Frequency Response [- 3dB]: 68 - 19.000 Hz Max SPL: 129 dB HF: 1” Type HF: Compression driver Directivity: 80/65 x 60° Horn: Asymmetrical CD Horn LF: 10”

Frequency Response [- 10dB]: 55 - 20.000 Hz Frequency Response [- 3dB]: 64 - 19.000 Hz Max SPL: 130 dB HF: 1” Type HF: Compression driver Directivity: 80/65 x 60° Horn: Asymmetrical CD Horn LF: 12”

Frequency Response [- 10dB]: 48 - 20.000 Hz Frequency Response [- 3dB]: 57 - 19.000 Hz Max SPL: 131 dB HF: 1” Type HF: Compression driver Directivity: 80/65 x 60° Horn: Asymmetrical CD Horn LF: 15”

Amplifier

Amp Technology: digipro®G2 Amp Class: Class D Power PRG: 900 Watt

Processor

Controller: DSP 24bit/48kHz System Presets: Flat, Processed Limiter: Dual Active Peak, RMS, Thermal

Mechanics

Housing: Polyporpylen PP Angles Up: Monitor use 43° Width: 343 mm (13.72 in) Height: 553 mm (22.12 in) Depth: 304 mm (12.16 in) Weight: 11.7 kg (24.25 lbs)

Housing: Polyporpylen PP Angles Up: Monitor use 43° Width: 432 mm (17.28 in) Height: 655 mm (26.2 in) Depth: 353 mm (14.12 in) Weight: 18.9 kg (41,66 lbs)

Housing: Polyporpylen PP Angles Up: Monitor use 43° Width: 432 mm (17.28 in) Height: 655 mm (26.2 in) Depth: 353 mm (14.12 in) Weight: 19.3 kg (42,54 lbs)

OPERA BLACK LINE Professional Active Speakers

OPERA 508 DX OPERA 510 DX OPERA 512 DX OPERA 515 DX OPERA 710 DX OPERA 712 DX OPERA 715 DX OPERA 910 DX OPERA 912 DX OPERA 915 DX

Professional

Active Speakers

OPERA DX Professional Active Speakers

Professional Professional Active Speakers

Active Speakers

dBTechnologies has added another chapter to the celebrated Opera Series’ 12-year success story: welcome to the new Opera DX line. Our engineers have again succeeded in treating users to stateof-the-art features and functions unrivalled in this price range. The digipro® G2 digital power amps, DSPs and asymmetrical horns have been tuned to deliver peerless performance. And with that, the three Opera DX 500, 700, and 900 lines provide a tailored solution for every sound reinforcement application. The secret to the extraordinary performance of products bearing the dBTechnologies brand is the custom design effort that went into each component. These units outperform their rivals because almost every component was developed from the bottom up for the given product.

OPERA DX Professional Active Speakers

All components in an OPERA system are manufactured in our plants or sourced from trusted suppliers that we have relied on for many years, with dBTechnologies’ quality assurance experts rigorously monitoring the production process. Final assembly takes place at our home base in Bologna, Italy, where we burn in speakers and put every enclosure to the test for several hours before it ships. This painstaking attention to detail has made the OPERA series one of the most successful and most frequently copied speaker systems. dBTechnologies leverages leading-edge technologies and proven manufacturing processes to continue making – in Italy rather than offshore - quality products that deliver unmatched performance for the price.

OPERA 508 DX

OPERA 510 DX

Technical Data

Speaker Type: 2-Way Active Speaker

Acoustical data

Frequency Response [- 10dB]: 67 - 20.000 Hz Frequency Response [- 3dB]: 78 - 19.000 Hz Max SPL: 121 dB HF: 1” Type HF: Compression driver Directivity: 80/65 x 60° Horn: Asymmetrical CD Horn LF: 8”

Frequency Response [- 10dB]: 62 - 20.000 Hz Frequency Response [- 3dB]: 71 - 19.000 Hz Max SPL: 122 dB HF: 1” Type HF: Compression driver Directivity: 80/65 x 60° Horn: Asymmetrical CD Horn LF: 10”

Amplifier

Amp Technology: digipro® Amp Class: Class D Power PRG: 400 Watt

Processor

Controller: DSP 24bit/48kHz System Presets: Flat, Processed Limiter: Dual Active Peak, RMS, Thermal

Mechanics

Housing: Polyporpylen PP Angles Up: Monitor use 43° Width: 300 mm (12 in) Height: 484 mm (19.36 in) Depth: 284 mm (11.36 in) Weight: 7.9 kg (15.43 lbs)

Housing: Polyporpylen PP Angles Up: Monitor use 43° Width: 343 mm (13.72 in) Height: 553 mm (22.12 in) Depth: 304 mm (12.16 in) Weight: 9.8 kg (21.61 lb)

OPERA DX Professional Active Speakers

OPERA 508 DX ¢ OPERA 510 DX ¢ OPERA 512 DX ¢ OPERA 515 DX ¢

A Sound Out Of The Ordinary

OPERA 512 DX

OPERA 515 DX

Technical Data

Speaker Type: 2-Way Active Speaker

Acoustical data

Frequency Response [- 10dB]: 59 - 20.000 Hz Frequency Response [- 3dB]: 70 - 19.000 Hz Max SPL: 126 dB HF: 1” Type HF: Compression driver Directivity: 80/65 x 60° Horn: Asymmetrical CD Horn LF: 12”

Frequency Response [- 10dB]: 52 - 20.000 Hz Frequency Response [- 3dB]: 60 - 19.000 Hz Max SPL: 127 dB HF: 1” Type HF: Compression driver Directivity: 80/65 x 60° Horn: Asymmetrical CD Horn LF: 15”

Amplifier

Amp Technology: digipro® Amp Class: Class D Power PRG: 400 Watt

Processor

Controller: DSP 24bit/48kHz System Presets: Flat, Processed Limiter: Dual Active Peak, RMS, Thermal

Mechanics

Housing: Polyporpylen PP Angles Up: Monitor use 43° Width: 432 mm (17.28 in) Height: 655 mm (26.2 in) Depth: 353 mm (14.12 in) Weight: 15.8 kg (33.07 lbs)

Housing: Polyporpylen PP Angles Up: Monitor use 43° Width: 432 mm (17.28 in) Height: 655 mm (26.2 in) Depth: 353 mm (14.12 in) Weight: 16.7 kg (35.27 lbs)

OPERA DX Professional Active Speakers

OPERA 710 DX Technical Data

OPERA 700 DX Advanced Active Technology Equipped with 700-watt digipro®G2 power amps, high-quality transducers, and modern DSPs, every 700 Series sound system delivers the kind of stellar audio performance that sets the stage for success. And that makes it the perfect companion for the discerning performer.

Speaker Type: 2-Way Active Speaker

Acoustical data Frequency Response [- 10dB]: 61 - 20.000 Hz Frequency Response [- 3dB]: 70 - 19.000 Hz Max SPL: 127 dB HF: 1” Type HF: Compression driver Directivity: 80/65 x 60° Horn: Asymmetrical CD Horn LF: 10”

Amplifier Amp Technology: digipro®G2 Amp Class: Class D Power PRG: 700 Watt

Processor Controller: DSP 24bit/48kHz System Presets: Flat, Processed Limiter: Dual Active Peak, RMS, Thermal

Mechanics Housing: Polyporpylen PP Angles Up: Monitor use 43° Width: 343 mm (13.72 in) Height: 553 mm (22.12 in) Depth: 304 mm (12.16 in) Weight: 11.6 kg (24.25 lbs)

OPERA DX Professional Active Speakers

OPERA 710 DX ¢ OPERA 712 DX ¢ OPERA 715 DX ¢

A Sound Out Of The Ordinary

OPERA 712 DX

OPERA 715 DX

Technical Data

Speaker Type: 2-Way Active Speaker

Acoustical data

Frequency Response [- 10dB]: 59 - 20.000 Hz Frequency Response [- 3dB]: 70 - 19.000 Hz Max SPL: 128 dB HF: 1” Type HF: Compression driver Directivity: 80/65 x 60° Horn: Asymmetrical CD Horn LF: 12”

Frequency Response [- 10dB]: 48 - 20.000 Hz Frequency Response [- 3dB]: 58 - 19.000 Hz Max SPL: 129 dB HF: 1” Type HF: Compression driver Directivity: 80/65 x 60° Horn: Asymmetrical CD Horn LF: 15”

Amplifier

Amp Technology: digipro®G2 Amp Class: Class D Power PRG: 700 Watt

Processor

Controller: DSP 24bit/48kHz System Presets: Flat, Processed Limiter: Dual Active Peak, RMS, Thermal

Mechanics

Housing: Polyporpylen PP Angles Up: Monitor use 43° Width: 432 mm (17.28 in) Height: 655 mm (26.2 in) Depth: 353 mm (14.12 in) Weight: 15.4 kg (33.07 lbs)

OPERA DX Professional Active Speakers

OPERA 910 DX Technical Data

OPERA 900 DX High-end Audio Performance It doesn’t get any better than this: the OPERA 900 is not only the flagship of the line, it is also the reference standard for the entire class. Its 900-watt digipro®G2 power amp comes with a SMPS and an onboard DSP. Paired with a premium woofer and a high-end driver sporting a 1.4” diaphragm, it packs a powerful low-frequency punch and comjures crystalclear top end. Its range is nothing short of remarkable.

Speaker Type: 2-Way Active Speaker

Acoustical data Frequency Response [- 10dB]: 60 - 20.000 Hz Frequency Response [- 3dB]: 68 - 19.000 Hz Max SPL: 129 dB HF: 1” Type HF: Compression driver Directivity: 80/65 x 60° Horn: Asymmetrical CD Horn LF: 10”

Amplifier Amp Technology: digipro®G2 Amp Class: Class D Power PRG: 900 Watt

Processor Controller: DSP 24bit/48kHz System Presets: Flat, Processed Limiter: Dual Active Peak, RMS, Thermal

Mechanics Housing: Polyporpylen PP Angles Up: Monitor use 43° Width: 343 mm (13.72 in) Height: 553 mm (22.12 in) Depth: 304 mm (12.16 in) Weight: 11.7 kg (24.25 lbs)

OPERA DX Professional Active Speakers

OPERA 910 DX ¢ OPERA 912 DX ¢ OPERA 915 DX ¢

A Sound Out Of The Ordinary

OPERA 912 DX

OPERA 915 DX

Technical Data

Speaker Type: 2-Way Active Speaker

Acoustical data

Frequency Response [- 10dB]: 55 - 20.000 Hz Frequency Response [- 3dB]: 68 - 19.000 Hz Max SPL: 130 dB HF: 1” Type HF: Compression driver Directivity: 80/65 x 60° Horn: Asymmetrical CD Horn LF: 12”

Frequency Response [- 10dB]: 48 - 20.000 Hz Frequency Response [- 3dB]: 58 - 19.000 Hz Max SPL: 131 dB HF: 1” Type HF: Compression driver Directivity: 80/65 x 60° Horn: Asymmetrical CD Horn LF: 15”

Amplifier

Amp Technology: digipro®G2 Amp Class: Class D Power PRG: 900 Watt

Processor

Controller: DSP 24bit/48kHz System Presets: Flat, Processed Limiter: Dual Active Peak, RMS, Thermal

Mechanics

Housing: Polyporpylen PP Angles Up: Monitor use 43° Width: 432 mm (17.28 in) Height: 655 mm (26.2 in) Depth: 353 mm (14.12 in) Weight: 18.1 kg (39.68 lbs)

Housing: Polyporpylen PP Angles Up: Monitor use 43° Width: 432 mm (17.28 in) Height: 655 mm (26.2 in) Depth: 353 mm (14.12 in) Weight: 18.8 kg (39.68 lbs)

OPERA DX Professional Active Speakers

CROMO 8+ CROMO 10+ CROMO 12Club CROMO 12+ CROMO 15+

2-Way Active Speakers

CROMO 2-Way Active Speakers

-Way 2-Way Active 2 Active Speakers Speakers

The Cromo+ Series offers powered loudspeakers with modern digital technology for first time users, without having to miss out on professional features and outstanding audio performance.

CROMO 8+ Technical Data

The Cromo+ Series features the ultra compact digipack digital power amplifiers, based on the successful digipro® amp technology for maximum efficiency. The integrated digital sound processor (DSP) caters for perfect sound calibration of the individual speaker components. All in all, true professional features, unique in its class and setting new standards in entry level speaker lines. The compact multifunctional housing of the Cromo+ speaker line, with asymetrical CD horns, can be used for many different applications, such as live events, a public address system for a singer, for monitoring purposes on stage, or for fixed installations in Bars or lounges.

Speaker Type: 2-Way Active Speaker

Acoustical data Frequency Response [- 10dB]: 68 - 20.000 Hz Frequency Response [- 3dB]: 80 - 19.000 Hz Max SPL: 118 dB HF: 1” Type HF: Compression driver Directivity: 90/70 x 60° Horn: Asymmetrical CD Horn LF: 8”

Amplifier Amp Technology: Digipack™ Amp Class: Class D Power PRG: 300 Watt

Processor Controller: DSP 24bit/48kHz System Presets: Flat, Processed Limiter: Dual Active Peak, RMS, Thermal

Mechanics

All Cromo+ models have a microphone input on XLR and jack sockets for maximum flexibility.

Housing: Polyporpylen PP Angles Up: Monitor use 43° Width: 270 mm (10.8 in) Height: 435 mm (17.4 in) Depth: 252 mm (10.08 in) Weight: 7.8 kg (15.43 lbs)

PACK

CROMO 2-Way Active Speakers

CROMO 10+

CROMO 12Club

Technical Data

Speaker Type: 2-Way Active Speaker

Acoustical data

Frequency Response [- 10dB]: 65 - 20.000 Hz Frequency Response [- 3dB]: 70 - 19.000 Hz Max SPL: 121 dB HF: 1” Type HF: Compression driver Directivity: 90/70 x 60° Horn: Asymmetrical CD Horn LF: 10”

Frequency Response [- 10dB]: 55 - 20.000 Hz Frequency Response [- 3dB]: 60 - 19.000 Hz Max SPL: 124 dB HF: 1” Type HF: Compression driver Directivity: 90/70 x 60° Horn: Asymmetrical CD Horn LF: 12”

Amplifier

Amp Technology: Digipack™ Amp Class: Class D Power PRG: 400 Watt

Processor

Controller: DSP 24bit/48kHz System Presets: Flat, Processed Limiter: Dual Active Peak, RMS, Thermal

Mechanics

Housing: Polyporpylen PP Angles Up: Monitor use 43° Width: 320 mm (12.8 in) Height: 508 mm (20.32 in) Depth: 297 mm (11.88 in) Weight: 12 kg (26.46 lbs)

Housing: Polyporpylen PP Angles Up: Monitor use 43° Width: 402 mm (16.08 in) Height: 615 mm (24.6 in) Depth: 356 mm (14.24 in) Weight: 17.7 kg (39.02 lbs)

CROMO 2-Way Active Speakers

CROMO 10+ ¢ CROMO 12Club ¢ CROMO 12+ ¢ CROMO 15+ ¢

More Power To Your Power Amp

CROMO 12+

CROMO 15+

Technical Data

Speaker Type: 2-Way Active Speaker

Acoustical data

Frequency Response [- 10dB]: 55 - 20.000 Hz Frequency Response [- 3dB]: 60 - 19.000 Hz Max SPL: 126 dB HF: 1” Type HF: Compression driver Directivity: 90/70 x 60° Horn: Asymmetrical CD Horn LF: 12”

Frequency Response [- 10dB]: 45 - 20.000 Hz Frequency Response [- 3dB]: 50 - 19.000 Hz Max SPL: 128 dB HF: 1” Type HF: Compression driver Directivity: 90/70 x 60° Horn: Asymmetrical CD Horn LF: 15”

Amplifier

Amp Technology: Digipack™ Amp Class: Class D Power PRG: 600 Watt

Processor

Controller: DSP 24bit/48kHz System Presets: Flat, Processed Limiter: Dual Active Peak, RMS, Thermal

Mechanics

Housing: Polyporpylen PP Angles Up: Monitor use 43° Width: 402 mm (16.08 in) Height: 615 mm (24.6 in) Depth: 356 mm (14.24 in) Weight: 18.5 kg (39.68 lbs)

Housing: Polyporpylen PP Angles Up: Monitor use 43° Width: 470 mm (18.8 in) Height: 720 mm (28.8 in) Depth: 405 mm (16.2 in) Weight: 22.9 kg (50.49 lbs)

CROMO 2-Way Active Speakers

SUB 15H SUB 18H SUB 28D SUB 12D SUB 05D SUB 808D SUB 15D SUB 18D

Active

Subwoofers

SUB Subwoofers

Active Class-D Active Class-D Subwoofers

Subwoofers

dBTechnologies is well known for its remarkable active subwoofers with outstanding performance, combining powerful and precise subsonic reproduction with excellent tonal quality.

toting and setting up these bins is an exercise in convenience. This handling ease is an asset users are sure to value, particularly those frequently tasked to set up and tear down systems for live applications.

All powered subwoofers are equipped with an active crossover, which can operate in Mono or Stereo mode, providing all combinations for applications with one or more subwoofers.

Developed by dBTechnologies, H.E.T™ housings are made of premium-quality multiply wood with a hardwearing, durable, and scratch-resistant coating. Tough, robust plastic side panels provide excellent protection for the housing as well as integrated grips and electrical connectors for utmost handling convenience and safety.

With digital power amps lightening the load,

H.E.T™ (Hybrid Enclosure Technology)

Digipro™ and Digipack™ digital amplifiers

Double Sub Preset EQ

Stereo I/O for easy setup

Delay on-board (Sub H Series)

SUB Subwoofers

Sub 15H & Sub 18H

SUB 15H

dBTechnologies’ new subwoofers H Series offer remarkable specifications and user-friendliness. With 1000W (1400W Peak Power) and a high-performance 15” woofer with 3” coil, the Sub 15H is especially suited for small to mid-sized events, where high performance needs to be packaged into compact size.

Technical Data

Whenever a lower extension is required, the perfect choice is the new Sub 18H, equipped with a 1500W (2000W Peak Power) power amplifier and a high-performance 18” woofer with 4” coil.

Acoustical data

Thanks to their unique configuration, termed Hybrid Horn-Loading, the boxes can be tuned to the lowest frequencies to improve system efficiency and convey a deep, enveloping sound. Unlike conventional horn loaded systems, 15H and 18H subs ensure excellent efficiency even at close listening distance, which makes them suited for use even in small venues.

Speaker Type: Semi Horn-loaded Active Subwoofer

Frequency Response [- 10dB]: 35 - 150 Hz Max SPL: 133 dB Directivity: omnidirectional LF: 15” Voice Coil LF: 3”

Amplifier Amp Technology: Digipro G3™ Amp Class: Class D PRG Power: 1000 W Peak Power: 1400 W Power supply: 700 W SMPS with PSU Auto-range (110V~ and 220V~)

Processor The new 15H sub offers stereo inputs with selectable link or crossover outputs, a crossover frequency switch at 90 or 120 Hz, a phase inversion switch and built-in delay up to 4.5 ms (adjustable in 0.5 ms steps). The delay helps you to improve the correct coupling with the whole line-up of dB Technologies full-range speakers, and to make advanced subwoofer configurations without the help of any external processor (Cardioid or EndFire or Straight Line). As a matter of fact, the built-in features - variable crossover frequency, phase and delay - let the new Sub H Series be compatible with any other speaker of our lines.

Controller: DSP 56 bit AD/DA Coverters: 24 bit/48 kHz Limiter: Dual Active, Multiband, RMS/Peak, Thermal Crossover Frequency: 90 or 120 Hz, 24dB/Octave Controls: X-Over frequency selection Delay switch up to 4.5ms Phase inversion switch Outputs mode switch (Link/X-over) Mini-USB type “B” port (service data)

Inputs Signal Input: 2x XLR Signal Output: 2x XLR X-Over Out/Link Out

Mechanics Housing: Birch plywood, Black PVC cover Width: 524 mm (20.6 in) Height: 511 mm (20.1 in) Depth: 695 mm (27.4 in) Weight: 31.5 kg (69.4 lbs)

SUB Subwoofers

SUB 15H ¢ SUB 18H ¢

Exceptionally Light And Remarkably Rugged

SUB 18H

The subs also feature a mini USB Type-B port to update system firmware and retrieve a telemetry log file that provides information on abnormal events, usage time and amplifier status.

Technical Data Speaker Type: Semi Horn-loaded Active Subwoofer

Acoustical data Frequency Response [- 10dB]: 28 - 150 Hz Max SPL: 134 dB Directivity: omnidirectional LF: 18” Voice Coil LF: 4”

The latest-generation digital amplifier Digipro™ G3 ensures excellent performance and low energy consumption thanks to its highly efficient, yet very lightweight system. The auto-range digital power supply allows it to operate both on 110V~ and on 220V~. The new 28/56 Bit DSP with 24 Bit/48KHz A/D conv. provides sound performance above all expectations and perfect system control even under the most extreme operating conditions, thanks to its advanced limiting functions.

Amplifier Amp Technology: Digipro G3™ Amp Class: Class D PRG Power: 1500 W Peak Power: 2000 W Power supply: 1000 W SMPS with PSU Auto-range (110V~ and 220V~)

Processor Controller: DSP 56 bit AD/DA Coverters: 24 bit/48 kHz Limiter: Dual Active, Multiband, RMS/Peak, Thermal Crossover Frequency: 90 or 120 Hz, 24dB/Octave Controls: X-Over frequency selection Delay switch up to 4.5ms Phase inversion switch Outputs mode switch (Link/X-over) Mini-USB type “B” port (service data)

The PVC faced birch plywood speaker box is extra resistant also thanks to polypropylene edges that protect it from scratching or impacts during transport. This unique Hybrid Enclosure Technology offers outstanding strength and durability, making your speaker truly road-ready, with their exclusives Aluminum heavy-duty handles. The M20 threaded mount on the top end of the box permits any type of full-range speaker to be installed using a standard pole with M20 thread. DS2-S mini pole is also available as an option to adapt any dB Technologies speaker to 15H and 18H subs.

Inputs Signal Input: 2x XLR Signal Output: 2x XLR X-Over Out/Link Out

Mechanics Housing: Birch plywood, Black PVC cover Width: 524 mm (20.6 in) Height: 711 mm (28 in) Depth: 695 mm (27.4 in) Weight: 41.4 kg (91.3 lbs)

SUB Subwoofers

PACK

SUB 28D Technical Data

Active 2x8” Subwoofer

Speaker Type: Active Bandpass Subwoofer

We engineered the SUB 28 D to provide low-end reinforcement for compact satellites such as dBTechnologies L and K Series speakers.

Acoustical data Frequency Response [- 10dB]: 45 - 150 Hz Max SPL: 125 dB Directivity: omnidirectional LF: 2x8”

Amplifier Amp Technology: Digipack™ Amp Class: Class D Peak Power: 800 W

Processor This light and lean enclosure houses two 8” woofers driven by a 800W digital power amp and an onboard digital stereo x-over. Setting up mono and stereo satellite systems is a piece of cake with this amp and DSP on board.

Controller: DSP 24 bit/48 kHz Phase: 0, 180° Limiter: Dual Active Limiter Crossover Frequency: 100 Hz, 24dB/Octave System Presets: Flat, Boost

Inputs Signal Input: 2x XLR Signal Output: 2x XLR X-Over Out/Link Out)

Mechanics Housing: Multiplex with H.E.T coating, reinforced Width: 290 mm (11.6 in) Height: 520 mm (20.8 in) Depth: 505 mm (20.2 in) Weight: 19.5 kg (42.99 lbs)

505 mm

520 mm

290 mm

SUB Subwoofers

SUB 28D ¢ SUB 12D ¢

Exceptionally Light And Remarkably Rugged

SUB 12D

PACK

Technical Data Speaker Type: Active Bandpass Subwoofer

Active 12” Subwoofer

Acoustical data

Equipped with a 800W digital power amp, the SUB 12 D is the perfect complement to 8” or 10” speaker systems for users looking to set up small but assertive satellite systems that deliver exceptional performance.

Frequency Response [- 10dB]: 40 - 150 Hz Max SPL: 127 dB Directivity: omnidirectional LF: 12”

Amplifier Amp Technology: Digipack™ Amp Class: Class D Peak Power: 800 W

Processor Controller: DSP 24 bit/48 kHz Phase: 0, 180° Limiter: Dual Active Limiter Crossover Frequency: 100 Hz, 24dB/Octave System Presets: Flat, Boost

Featuring compact dimensions and the innovative H.E.T™ housing, this unit is easy to transport and set up. Connecting satellites is an exercise in convenience thanks to an integrated digital crossover (DSP) with adjustable frequency.

Inputs Signal Input: 2x XLR Signal Output: 2x XLR X-Over Out/Link Out

Mechanics Housing: Multiplex with H.E.T coating, reinforced Width: 390 mm (15.6 in) Height: 520 mm (20.4 in) Depth: 505 mm (19.9 in) Weight: 24 kg (52.91 lbs)

390 mm

520 mm

505 mm

SUB Subwoofers

PACK

SUB 05D Technical Data

Active 15” Subwoofer

Speaker Type: Active Bandpass Subwoofer

The 800W SUB 05D is an excellent choice for extending 10” and 12” loudspeakers’ range. It packs the kind powerful low-end punch necessary for contemporary sounds and pumps out plenty of SPL for live applications.

Acoustical data Frequency Response [- 10dB]: 30 - 150 Hz Max SPL: 129 dB Directivity: omnidirectional LF: 15”

Amplifier Amp Technology: Digipack™ Amp Class: Class D Peak Power: 800 W

The unit connects easily and quickly courtesy of a built-in digital stereo crossover (DSP) with boost selector and phase inversion switch. Housed in the newly developed H.E.T™ enclosure featuring integrated control features, this rugged cabinet tough enough to stand up to the rigors of transport.

Processor Controller: DSP 24 bit/48 kHz Phase: 0, 180° Limiter: Dual Active Limiter Crossover Frequency: 100 Hz, 24dB/Octave System Presets: Flat, Boost

Inputs Signal Input: 2x XLR Signal Output: 2x XLR X-Over Out/Link Out

Mechanics Housing: Multiplex with H.E.T coating, reinforced Width: 490 mm (19.6 in) Height: 520 mm (20.5 in) Depth: 615 mm (24 in) Weight: 29.5 kg (65.04 lbs)

615 mm

520 mm

490 mm

SUB Subwoofers

SUB 05D ¢ SUB 808D ¢

Exceptionally Light And Remarkably Rugged

SUB 808D

PACK

Technical Data Speaker Type: Active Bandpass Subwoofer

Active 18” Subwoofer

Acoustical data

Sporting an 18” woofer loaded to a bandpass housing and an onboard 1000W digital power amp, the SUB 808D delivers a low-ranging bass foundation to provide precisely the low-end support 12” and 15” speaker systems need.

Frequency Response [- 10dB]: 30 - 150 Hz Max SPL: 130 dB Directivity: omnidirectional LF: 18”

Amplifier Amp Technology: Digipack™ Amp Class: Class D Peak Power: 1000 W

Processor

Such rigs are easily set up, connected and configured thanks to the builtin digital stereo x-over (DSP) with phase reverse switch, and integrated control features.

Controller: DSP 24 bit/48 kHz Phase: 0, 180° Limiter: Dual Active Limiter Crossover Frequency: 100 Hz, 24dB/Octave System Presets: Flat, Boost

The H.E.T™ enclosure is a tough, road-worthy housing that keeps the components inside well protected.

Inputs Signal Input: 2x XLR Signal Output: 2x XLR Link Out/X-Over Out

Mechanics Housing: Multiplex with H.E.T coating, reinforced Width: 640 mm (25.6 in) Height: 520 mm (20.8 in) Depth: 615 mm (24.6 in) Weight: 34.8 kg (74.96 lbs)

640 mm

520 mm

615 mm

SUB Subwoofers

Pf C P Pf fC C

SUB 15D Technical Data

Active 15” Subwoofer

Speaker Type: Active Bandpass Subwoofer

Loaded with 15” woofer and featuring band-pass cabinet, the SUB 15D is a remarkably agile and responsive speaker system.

Acoustical data

Driven by an onboard digipro® digital power amp, this bin packs a powerful low-end punch perfect for rendering kick drums with high SPL.

Frequency Response [- 10dB]: 35 - 150 Hz Max SPL: 133 dB Directivity: omnidirectional LF: 15” Voice Coil LF: 3”

Amplifier

OUT 1

Amp Technology: Digipro® Amp Class: Class D Power PRG: 1000 W Peak Power: 2000 W

OUT 2

LINK XOVER

100-120V~ 50-60Hz (T8A 250V~)

Processor

220-240V~ 50-60Hz (T4A 250V~)

ON MUTE SGNL IM

Internal voltage setup

“CAUTION”

TO PREVENT ELECTRICAL SHOCK DO NOT REMOVE COVER

“AVIS”

RISQUE DE CHOCH ELECTRIQUE NE PAS OUVRIR

MAINS FUSE PUSH

PUSH XOVER PHASE

0dB Stereo

0° 180°

MAINS INPUT

120Hz 90Hz

SUB-WOOFER LEVEL

BALANCED INPUT 1 MONO

0dB Mono

LINK

Controller: Digital Phase: 0, 180° Limiter: RMS, Peak, thermal Crossover Frequency LF-HF: 90, 120 Hz LF X-over out slope: 24 dB/Octave

BALANCED INPUT 2

Inputs Signal Input: 2x XLR Signal Output: 2x XLR X-Over Out/ Link Out

Mechanics Housing: Multiplex, birch plywood Pole Mount: M20 Width: 436 mm (17.44 in) Height: 600 mm (24 in) Depth: 600 mm (24 in) Weight: 32 kg (70.55 lbs)

600 mm

436 mm

SUB Subwoofers

SUB 15D ¢ SUB 18D ¢

Exceptionally Light And Remarkably Rugged

Pf C P Pf fC C

SUB 18D Technical Data Speaker Type: Active Bandpass Subwoofer

Active 18” Subwoofer

Acoustical data

The SUB 18D is the first-choice bass bin for users seeking powerful punch and ultra low-end response. Fine-tuned to augment and amplify the highpower 18” woofer’s audio performance, this custom engineered bandpass enclosure outperforms conventional bass-reflex designs, achieving higher peak levels.

Frequency Response [- 10dB]: 28 - 150 Hz Max SPL: 134 dB Directivity: omnidirectional LF: 18” Voice Coil LF: 4”

Amplifier Amp Technology: Digipro® Amp Class: Class D Power PRG: 1400 W Peak Power: 2800 W

OUT 1

Processor

“CAUTION”

TO PREVENT ELECTRICAL SHOCK DO NOT REMOVE COVER

“AVIS”

RISQUE DE CHOCH ELECTRIQUE NE PAS OUVRIR

Controller: Digital Phase: 0, 180 ° Limiter: Dual Active Limiter Crossover Frequency LF-HF: 90, 120 Hz LF X-over out slope: 24 dB/Octave

FULL RANGE MAINS INPUT 100-240V~ 50-60Hz 1000W MAX

OUT 2

LINK XOVER

MAINS LINK

220-240V ~ (T5A 250V) 100-120V ~ (T10A 250V)

PUSH

ON MUTE SGNL IM

PUSH XOVER PHASE

MAINS FUSE

120Hz 90Hz

SUB-WOOFER LEVEL

0dB Stereo

0° 180°

ACTIVE P.F.C.

OUTPUT 220-240V ~ MAX 15A 100-120V ~ MAX 10A

BALANCED INPUT 1 MONO

Inputs

0dB Mono

BALANCED INPUT 2

Signal Input: 2x XLR Signal Output: 2x XLR X-Over Out/ Link Out

Mechanics Housing: Multiplex, birch plywood Pole Mount: 2x M20 Width: 530 mm (21.2 in) Height: 700 mm (28 in) Depth: 600 mm (24 in) Weight: 44 kg (97 lbs)

530 mm

700 mm

600 mm

SUB Subwoofers

Self-powered speaker

Back panel for fast access to the battery

Digital Class-D amplifier

SMPS with auto-range (works at 110V~ or 220V~)

UHF Radio receiver built-in

XLR/Jack TRS/RCA inputs

USB port (for mp3 media players)

Bluetooth Receiver (optional)

Mix Output

Ultra-bright OLED screen for user interface

Battery-powered Bi-amp Speaker

READY 4 Battery-powered Bi-amp Speaker

Battery-powered Battery-powere Bi-amp Speaker

Bi-amp Speaker

READY 4 Technical Data Speaker Type: Bi-amp battery-powered speaker

Acoustical data Frequency Response [- 10dB]: 70 Hz - 20.000 kHz Max SPL: 120 dB HF: 1” Voice Coil HF: 1” Directivity: 80/65 x 60° Horn: Asymmetrical CD Horn LF: 10” Voice Coil LF: 1.5”

Amplifier Amp Technology: digipro®G2 Amp Class: Class D High efficiency power amplifier Peak Power: 200 W Controls: 1x OLED display with 4 push buttons 2x Audio signal monitoring leds 1x USB type “B” port (service data) 1x power supply source switch (external, internal or OFF) Cooling: convection Main PSU: 45 W Full-range SMPS (90-264 V~) for full operation and battery charging Internal Battery PSU: 12V - 7Ah lead acid battery (user-replaceable) External 15V PSU: DC conn. for 15V external power supply

Processor Controller: DSP 56 bit AD/DA Converter: 24bit/48kHz Crossover Frequency LF-HF: 1950 Hz Slope LF-HF: 24 dB/Octave Limiter: Dual Active, Multiband, RMS/Peak, Thermal Special features: Digital battery charger Battery management and power saving functions

Inputs Master Channel: 1x Master volume potentiometer Mic/Line Channel: 1x Combo (XLR/jack) input 1x Mic/Line volume control 1x Mic/Line selection switch Wireless Mic Channel: 1x 16ch. UHF wireless built-in receiver 1x Wireless receiver volume control Media Channel: 2x RCA unbalanced inputs 1x Bluetooth™ built-in receiver (optional) 1x USB type “A” port for media files (MP3/WMA/AAC) 1x RCA/USB/Bluetooth™ volume control Mix output: 1x 6.3” unbalanced jack mix Out

Mechanics Housing: Polyporpylen PP Angles Up: Monitor use 43° Handles: 1x top side Width: 343 mm (13.72 in) Height: 553 mm (22.12 in) Depth: 304 mm (12.16 in) Weight: 11.3 kg (25 lbs)

Technology on the move After the great success of the Mobile 110 sport speaker, dBTechnologies is introducing Ready 4, a high-performance and versatile speaker that will set a new standard for portable PA systems. Featured with multiple power supply options (battery/power mains), the new Ready 4 can be used in any situation. The battery ensures several hours of autonomy. An exhausted battery can be quickly replaced with a charged battery through the back removable panel. The speaker can be connected to 220 V or 110 V AC power, thanks to a SMPS with auto-range, or a 15 V power supply via an optional external adapter. Based on the Black Line series box, the new Ready 4 features a stylish contemporary design that will suit any situation. An optional Bluetooth board, a MIX OUT output and a bright multi-function OLED display enhance the excellent potential of the new Ready 4, placing it right at the top of its category.

READY 4 Battery-powered Bi-amp Speaker

MINI

Series

MINIBOX L160D MINIBOX K300 MINIBOX K162 MINIBOX K70

Compact

Active Speakers

MINIBOX Compact Active Speakers

Compact Compact Active Speakers

Active Speakers

MINIBOX L160D

PACK

Technical Data Speaker Type: 2-Way Active Speaker

Acoustical data Frequency Response [- 10dB]: 70 - 20.000 Hz Max SPL: 116 dB HF: 1” Type HF: Dome Tweeter, coaxial Directivity: 85 x 75° LF: 2x5”

Amplifier Amp Technology: digipro® Amp Class: Class D Power PRG: 160 W Cooling: Convection

Active Speakers A powerful yet surprisingly light cabinet, the remarkably compact L160D offers a variety of connection options to provide convenient sound reinforcement for multimedia applications. Paired with a DSP, the two 5” phase-corrected loudspeakers deliver astonishingly high sound pressure levels for their size and an amazingly transparent and articulate sonic image. The multifunctional housing offers wall-mount fixing points for permanent installation and a pole mount for portable use.

Processor Controller: DSP 24bit/48kHz System Presets: 8 Limiter. Dual Active Peak, RMS, Thermal Slope MF-HF: 24 dB/Octave

Inputs Signal Input: 1x XLR Line In/Mic 1x 6.3mm phone jack 1x RCA cinch AUX with volume ctrl Microphone Input: Yes Signal Output: 1x 6.3mm phone jack Power Socket: VDE Voltage Range: 110-120 - 220-240 V

WB03

WB11

Mechanics Housing: Polyporpylen PP Angles Up: 60° for monitor use° Rigging Points: 2x M5 on side 2x M5 on bottom for accessories Accessory: WB03, SN120 Width: 200 mm (8 in) Height: 335 mm (13.4 in) Depth: 220 mm (8.8 in) Weight: 5.2 kg (11.46 lbs)

MINIBOX Compact Active Speakers

MINI

Series

MINIBOX K300 Technical Data

Active Speakers The most powerful compact cabinet in its class, the K300 is chock-full of innovative technologies.

Housed in an ultra compact enclosure, its digipro® bi-amped digital power amp delivers high performance and sound pressure levels. The 1“ HF driver renders midrange frequencies with pinpoint precision, and its response is richly detailed. The integrated DSP further enhances clarity and accuracy, and protects components using digital limiters.

Speaker Type: 2-Way Active Speaker

Acoustical data Frequency Response [- 10dB]: 70 - 20.000 Hz Max SPL: 118 dB HF: 1” Type HF: Neodymium driver Directivity: 80 x 60° LF: 2x6.5” Type LF: Neodymium

Amplifier Amp Technology: digipro Amp Class: Class D Power PRG: 300 W Cooling: Convection

Processor Controller: DSP 24bit/48kHz Limiter: Dual Active, Peak, RMS, Thermal

Inputs Signal Input: 1x XLR 1x 6.3mm phone jack 1x RCA cinch Microphone Input: Yes Signal Output: 1x XLR 1x 6.3mm phone jack 1x RCA cinch Power Socket: VDE Voltage Range: 240 V

Mechanics Housing: Polyporpylen PP Pole Mount: Optional Rigging Points: 4x M5 Width: 210 mm (8.4 in) Height: 350 mm (14 in) Depth: 270 mm (10.8 in) Weight: 5.5 kg (12.13 lbs)

MINIBOX Compact Active Speakers

MINIBOX K300 ¢ MINIBOX K162 ¢ MINIBOX K70 ¢

A Big Heart In A Mini-box

MINIBOX K162

MINIBOX K70

Technical Data

Speaker Type: 2-Way Active Speaker

Acoustical data

Frequency Response [- 10dB]: 85 - 19.000 Hz Max SPL: 110 dB Type HF: Tweeter LF: 2x 6.5”

Frequency Response [- 10dB]: 100 - 18.000 Hz Max SPL: 101 dB Type HF: Tweeter LF: 5”

Amplifier

Power PRG: 160 W Cooling: Convection

Power PRG: 100 W Cooling: Convection

Processor

Controller: Analog Limiter: Soft Clip

Inputs

Signal Input: 1x XLR 1x 6.3mm phone jack 1x RCA cinch Microphone Input: Yes Signal Output: 1x XLR 1x 6.3mm phone jack 1x RCA cinch Power Socket: VDE

Mechanics

Housing: Polyporpylen PP Rigging Points: 4x M5 Width: 210 mm (8.4 in) Height: 350 mm (14 in) Depth: 270 mm (10.8 in) Weight: 5.5 kg (12.13 lbs)

Housing: Polyporpylen PP Width: 170 mm (6.8 in) Height: 270 mm (10.8 in) Depth: 185 mm (7.4 in) Weight: 3.5 kg (7.72 lbs)

MINIBOX Compact Active Speakers

ARENA 8 ARENA 10 ARENA 12 ARENA 15 ARENA SW15 ARENA SW18 ARENA 8 PRO ARENA 10 PRO ARENA 12 PRO ARENA 15 PRO ARENA SW15 PRO ARENA SW18 PRO

Professional Passive Speakers & Subs

ARENA Professional Passive Speakers & Subs

2-Way Passive 2-Way Passive Loudspeakers

Loudspeaker

The passive loudspeaker range ARENA offers highquality 2-way enclosures and powerful subwoofers. This series can be used for many different mobile or fixed install applications due to its extensive configurations. All high/mid units use a multipurpose housing made out of multilayer birch wood, offering a pole mount, 12 professional flypoints and a slanted backside for monitor applications.

Due to the premium loudspeaker components, all units are able to handle high sound pressure levels. They offer outstanding, specially designed constant directivity horns which are rotatable by 90°, thanks to the symmetrical shape. The low weight of the enclosures allows easy handling. All models are equipped with a black front grill with acoustic foam layer.

High-quality multifunctional housing made of multiplex coated with a robust black textured finish ¢

High-quality passive crossovers featuring PTC driver protection

Professional-grade M8/M10 threaded rigging points

Rotatable high-frequency, widedispersionhorns painstakingly engineered for excellent performance ¢

Subwoofer’s threaded M20 base ready to accept a pole mount ¢

High-quality components selected for ultra precise response ¢

Professional mounting accessories optionally available ¢

ARENA Professional Passive Speakers & Subs

ARENA 8

ARENA 10

Technical Data

Speaker Type: 2-Way Passive Speaker

Acoustical data

Nominal Power Rating: 200 W/RMS Program Power Rating: 400 W Impedance: 8 Ohms Frequency Response [- 3dB]: 100 - 19.000 Hz Max SPL: 122 dB HF: 1” Driver Protection: PTC Directivity: 90x70° Horn: CD Horn Rotatable Horn: Yes Crossover Frequency (passive): 2100 Hz Slope MF-HF: 18 dB/Octave LF: 8” Voice Coil LF: 1.5”

Nominal Power Rating: 300 W/RMS Program Power Rating: 600 W Impedance: 8 Ohms Frequency Response [- 3dB]: 95 - 19.000 Hz Max SPL: 125 dB HF: 1” Driver Protection: PTC Directivity: 90x70° Horn: CD Horn Rotatable Horn: Yes Crossover Frequency (passive): 2100 Hz Slope MF-HF: 18 dB/Octave LF: 10” Voice Coil LF: 2”

Inputs

Signal Input: 1x Speakon (Pin 1+=+) (Pin 1-=-) Signal Output: 1x Speakon (Pin 1+=+) (Pin 1-=-)

Mechanics

Housing: Multiplex birch plywood Pole Mount: 36mm Angles Up: Monitor use 45° Rigging Points: 12 x M8 Width: 270 mm (10.8 in) Height: 458 mm (18.32 in) Depth: 270 mm (10.8 in) Weight: 9.3 kg (20.5 lbs)

Housing: Multiplex birch plywood Pole Mount: 36mm Angles Up: Monitor use 45° Rigging Points: 12 x M8 Width: 321 mm (12.84 in) Height: 508 mm (20.32 in) Depth: 320 mm (12.8 in) Weight: 12.2 kg (26.9 lbs)

ARENA Professional Passive Speakers & Subs

ARENA 8 ¢ ARENA 10 ¢ ARENA 12 ¢ ARENA 15 ¢

Passive Loudspeakers & Subs

ARENA 12

ARENA 15

Technical Data

Speaker Type: 2-Way Passive Speaker

Acoustical data

Nominal Power Rating: 400 W/RMS Program Power Rating: 800 W Impedance: 8 Ohms Frequency Response [- 3dB]: 80 - 19.000 Hz Max SPL: 127 dB HF: 1” Driver Protection: PTC Directivity: 90x40° Horn: CD Horn Rotatable Horn: Yes Crossover Frequency (passive): 2000 Hz Slope MF-HF: 18 dB/Octave LF: 12” Voice Coil LF: 2”

Nominal Power Rating: 400 W/RMS Program Power Rating: 800 W Impedance: 8 Ohms Frequency Response [- 3dB]: 80 - 19.000 Hz Max SPL: 129 dB HF: 1” Driver Protection: PTC Directivity: 90x40° Horn: CD Horn Rotatable Horn: Yes Crossover Frequency (passive): 2000 Hz Slope MF-HF: 18 dB/Octave LF: 15” Voice Coil LF: 2.5”

Inputs

Signal Input: 1x Speakon (Pin 1+=+) (Pin 1-=-) Signal Output: 1x Speakon (Pin 1+=+) (Pin 1-=-)

Mechanics

Housing: Multiplex birch plywood Pole Mount: 36mm Angles Up: Monitor use 45° Rigging Points: 12 x M10 Width: 379 mm (15.16 in) Height: 631 mm (25.24 in) Depth: 378 mm (15.12 in) Weight: 17.8 kg (39.24 lbs)

Housing: Multiplex birch plywood Pole Mount: 36mm Angles Up: Monitor use 45° Rigging Points: 12 x M10 Width: 458 mm (18.32 in) Height: 710 mm (28.4 in) Depth: 453 mm (18.12 in) Weight: 23.7 kg (52.25 lb)

ARENA Professional Passive Speakers & Subs

ARENA SW15 Technical Data

Passive 15” Subwoofer The ARENA SW15 offers a 15” woofer with a 3” voice coil which can take a load up to 500W/RMS putting out an extraordinary SPL of 130dB at very powerful low end frequencies. It can be easily combined with ARENA10 and ARENA12 high/mid units, due to the internal passive crossover. Also possible is bi-amp operation using an external crossover unit.

Speaker Type: Passive Subwoofer

Acoustical data Nominal Power Rating: 500 W/RMS Program Power Rating: 1000 W Impedance: 8 Ohms Frequency Response [- 3dB]: 40 - 150 Hz Max SPL: 130 dB LF: 15 “ Voice Coil LF: 3 “ Internal Crossover: Yes Crossover Frequency (passive): 150 Hz

Inputs Signal Input: 1x Speakon (Pin 1+=+) (Pin 1-=-) Signal Output: 1x Speakon (Pin 1+=+) (Pin 1-=-)

Mechanics Housing: Multiplex birch plywood Width: 460 mm (18.4 in) Height: 600 mm (24 in) Depth: 600 mm (24 in) Weight: 34 kg (74.96 lbs)

460 mm

600 mm

ARENA Professional Passive Speakers & Subs

ARENA SW15 ¢ ARENA SW18 ¢

Passive Loudspeakers & Subs

ARENA SW18 Technical Data Speaker Type: Passive Subwoofer

Passive 18” Subwoofer

Acoustical data

The 4” voice coil of the ARENA SW18 delivers powerful and accurate low frequency reproduction, down to 35Hz, at a maximum load of 600W/RMS.

Nominal Power Rating: 600 W/RMS Program Power Rating: 1200 W Impedance: 8 Ohms Frequency Response [- 3dB]: 35 - 150 Hz Max SPL: 132 dB LF: 18“ Voice Coil LF: 4“ Internal Crossover: Yes Crossover Frequency (passive): 150 Hz

Sound pressure levels of up to 132dB at a crossover frequency of 150Hz, using the internal crossover make this subwoofer the professionals choice. This woofer can be easily combined with the ARENA satellite units, using just one external power amp.

Inputs Signal Input: 1x Speakon (Pin 1+=+) (Pin 1-=-) Signal Output: 1x Speakon (Pin 1+=+) (Pin 1-=-)

Mechanics Housing: Multiplex birch plywood Width: 565 mm (22.6 in) Height: 700 mm (28 in) Depth: 700 mm (28 in) Weight: 44 kg (97 lbs)

565 mm

700 mm

ARENA Professional Passive Speakers & Subs

ARENA 8 PRO

ARENA10 PRO

Technical Data

Speaker Type: 2-Way Passive Speaker

Acoustical data

Nominal Power Rating: 300 W/RMS Program Power Rating: 600 W Impedance: 8 Ohms Sensitivity 1W@1m: 94 dB Frequency Response [- 10dB]: 75 - 20.000 Hz Frequency Response [- 3dB]: 100 - 19.000 Hz Max SPL: 125 dB HF: 1” Voice Coil HF: 1.5” Driver Protection: PTC Directivity: 90X70° Horn: CD Horn Aluminium Rotatable Horn: Yes Crossover Frequency (passive): 1800 Hz Slope MF-HF: 18 dB/Octave LF: 8” Voice Coil LF: 2”

Nominal Power Rating: 300 W/RMS Program Power Rating: 600 W Impedance: 8 Ohms Sensitivity 1W@1m: 9 6 dB Frequency Response [- 10dB]: 70 - 20.000 Hz Frequency Response [- 3dB]: 90 - 19.000 Hz Max SPL: 127 dB HF: 1” Voice Coil HF: 1.5” Driver Protection: PTC Directivity: 90X70° Horn: CD Horn Aluminium Rotatable Horn: Yes Crossover Frequency (passive): 1800 Hz Slope MF-HF: 18 dB/Octave LF: 10” Voice Coil LF: 2”

Inputs

Signal Input: 1x Speakon (Pin 1+=+) (Pin 1-=-) Signal Output: 1x Speakon (Pin 1+=+) (Pin 1-=-)

Mechanics

Housing: Multiplex birch plywood Rigging Points: 12 x M8 Width: 270 mm (10.8 in) Height: 458 mm (18.32 in) Depth: 270 mm (10.8 in) Weight: 10.9 kg (24.03 lbs)

Housing: Multiplex birch plywood Rigging Points: 12 x M8 Width: 320 mm (12.8 in) Height: 508 mm (20.32 in) Depth: 320 mm (12.8 in) Weight: 14.2 kg (31.31 lbs)

ARENA Professional Passive Speakers & Subs

ARENA 8 PRO ¢ ARENA 10 PRO ¢ ARENA 12 PRO ¢ ARENA 15 PRO ¢

Passive Loudspeakers & Subs

ARENA12 PRO

ARENA15 PRO

Technical Data

Speaker Type: 2-Way Passive Speaker

Acoustical data

Nominal Power Rating: 500 W/RMS Program Power Rating: 1000 W Impedance: 8 Ohms Sensitivity 1W@1m: 100 dB Frequency Response [- 10dB]: 60 - 20.000 Hz Frequency Response [- 3dB]: 70 - 19.000 Hz Max SPL: 133 dB HF: 1.4” Voice Coil HF: 2.5” Driver Protection: PTC Directivity: 90X40° Horn: CD Horn Aluminium Rotatable Horn: Yes Crossover Frequency (passive): 1400 Hz Slope MF-HF: 18 dB/Octave LF: 12” Voice Coil LF: 3”

Inputs

Signal Input: 1x Speakon (Pin 1+=+) (Pin 1-=-) Signal Output: 1x Speakon (Pin 1+=+) (Pin 1-=-)

Mechanics

Housing: Multiplex birch plywood Rigging Points: 12 x M10 Width: 379 mm (15.16 in) Height: 631 mm (25.24 in) Depth: 378 mm (15.12 in) Weight: 22.1 kg (48.72 lbs)

Housing: Multiplex birch plywood Rigging Points: 12 x M8 Width: 458 mm (18.32 in) Height: 710 mm (28.4 in) Depth: 453 mm (18.12 in) Weight: 26.2 kg (57.76 lbs)

ARENA Professional Passive Speakers & Subs

ARENA SW15 PRO Passive 15” Subwoofer

Technical Data Speaker Type: Passive Subwoofer

The ARENA SW15 PRO is a compact, high-performance subwoofer housed in a bass reflex enclosure. Its impulse response is amazingly true, rendering low-end frequencies with hair-trigger precision in a tight, finely contoured sonic image. Deployed to stand alone or in a double stack, it is an excellent choice for FOH applications. What‘s more, its powerful punch makes it your subwoofer of choice for drum fills.

Acoustical data Nominal Power Rating: 500 W/RMS Program Power Rating: 1000 W Impedance: 8 Ohms Frequency Response [- 10dB]: 35 - X-Over Hz Frequency Response [- 3dB]: 40 - X-Over Hz Max SPL: 132 dB LF: 15“ Voice Coil LF: 3“ Internal Crossover: No

Inputs Signal Input: 1x Speakon (Pin 1+=+) (Pin 1-=-) Signal Output: 1x Speakon (Pin 1+=+) (Pin 1-=-)

Mechanics Housing: Multiplex birch plywood Pole Mount: M20 Width: 460 mm (18.4 in) Height: 600 mm (24 in) Depth: 600 mm (24 in) Weight: 34.8 kg (76.72 lbs)

460 mm

600 mm

ARENA Professional Passive Speakers & Subs

ARENA SW15 PRO ¢ ARENA SW18 PRO ¢

Passive Loudspeakers & Subs

ARENA SW18 PRO Passive 18” Subwoofer

Technical Data Speaker Type: Passive Subwoofer

The ARENA SW18 PRO is a powerful high-capacity 18” subwoofer housed in a bass reflex enclosure with a low limiting frequency of 35 Hz.

Acoustical data Nominal Power Rating: 1000 W/RMS Program Power Rating: 2000 W Impedance: 8 Ohms Frequency Response [- 10dB]: 28 - X-Over Hz Frequency Response [- 3dB]: 35 - X-Over Hz Max SPL: 134 dB LF: 18” Voice Coil LF: 4” Internal Crossover: No

Developed specifically to provide a big low-end boost for high-performance fullrange speakers, this bass bin’s hallmarks include remarkably dynamic performance and a powerful punch even at very low frequencies.

Inputs Signal Input: 1x Speakon (Pin 1+=+) (Pin 1-=-) Signal Output: 1x Speakon (Pin 1+=+) (Pin 1-=-)

Mechanics Housing: Multiplex birch plywood Pole Mount: M20 Width: 565 mm (22.6 in) Height: 700 mm (28 in) Depth: 700 mm (28 in) Weight: 43.2 kg (95.24 lbs)

565 mm

700 mm

ARENA Professional Passive Speakers & Subs

OPERA P15 PASSIVE SPEAKER

Technical Data Speaker Type: 2-Way Passive Speaker

Acoustical data Nominal Power Rating: 400 W/RMS Program Power Rating: 800 W Impedance: 8 Ohms Frequency Response [- 10dB]: 68 - 19.500 Hz Max SPL: 128 dB HF: 1” Voice Coil HF: 1.75” Driver Protection: PTC Directivity: 80°/65°x 60° Horn: Asymmetrical CD Horn Crossover Frequency (passive): 2100 Hz LF: 15” Voice Coil LF: 3”

Inputs Signal Input: 2x Speakon

Mechanics Housing: Polyporpylen PP Angles Up: Monitor use 43° Pole Mount: 36mm Optional Accessories: Mounting bracket Width: 432 mm (17.28 in) Height: 655 mm (26.2 in) Depth: 353 mm (14.12 in) Weight: 18.4 kg (40,57 lbs)

100

OPERA P15 2-Way Passive Speaker

AC-26N AC-26N Controller

Controller

AC26N Digital Audio Controller for Loudspeaker Processing The new audio digital processor AC26N allows you to control any professional audio system, both active and passive. Equipped with two inputs and six outputs balanced analogically, two in/ out digital AES/EBU and an RDNet control, this processor allows a perfect control in a simple and complete way. Each output possesses a parametric equalizer, delay, phase and level control, completely run by a powerful 28/56 Bit DSP, unique in its kind. This processors control may be directed by the front control panel or through an RDNet connected computer.

General Features:

Audio Specifications:

2x XLR Balanced analog inputs 6x XLR Balanced analog outputs 2 channels AES/EBU digital input with SRC (XLR connector) 2 channels AES/EBU digital ouputs (XLR connector) Full range power supply RDNet Hardware Interface USB Interface Remotable via RDNet or USB using dBtechnologies software Clean and Easy to use user interface on front panel

Max input level: 21dBu (without pad) / 27dBu (with -6dB pad) Max output level: 21dBu DSP processing: 28/56bit - 48KHz A/D and D/A Converters: 24bit - 96Khz Analog Input S/N ratio: 115dB A/D Section S/N ratio: 118dB D/A Section S/N ratio: 120dB

AC26N Controller

101

HPA Amplifiers HPA 1000 Technical Data

Technical Data

Power Output RMS 4Ohm: 2x 510W Power Output RMS 8Ohm: 2x 330W Weight: 15Kg

Power Output RMS 4Ohm: 2x 740W Power Output RMS 8Ohm: 2x 440W Weight: 17Kg

• Class (HD) technology • Fast Rensponse • Easy to Configure • Extensive Protective Circuits • Operable at 2 Ohms

HPA 2800

102

HPA 1400

HPA 3100

Technical Data

Power Output RMS 4Ohm: 2x 1050W Power Output RMS 8Ohm: 2x 680W Weight: 21Kg

Power Output RMS 4Ohm: 2x 1200W Power Output RMS 8Ohm: 2x 800W Weight: 14Kg

• Class (HD) technology • Fast Rensponse • Easy to Configure • Extensive Protective Circuits • Operable at 2 Ohms

• Class (HD) technology • Fast Rensponse • SMPS • Extensive Protective Circuits • Operable at 2 Ohms

HPA Amplifiers

Accessories Accessories installation, cables, covers...

installation, clables,

DVX

INSTALLATION

COVERS

TE M8 DTF 8 DTF 8A WB 09

TC 8

TE M8 DTF 10 DTF 10A WB 09

TC 10

TE M10 DTF 12 WB 09

TC 12

DVX D15 HP

TE M10 DTF 15 WB 09

TC 15

DVX DM12

TE M10

TC 12M

DVX DM15

TE M10

DVX D8 HP

DVX D10 HP

DVX D12 HP

SIGMA

TC 15M TC 28M

DVX DM28 INSTALLATION

CABLES

SIGMA S115

DS2

AFL 05

SIGMA S118

DS2

AFL 05 AFL 05

SIGMA S215 FLEXSYS

INSTALLATION

COVERS

FLEXSYS F8

TE M8 WB 09

TC F8

FLEXSYS F10

TE M8 WB 09

TC F8

FLEXSYS F12

TE M10 WB 09

TC F8

FLEXSYS F12

TE M10 WB 09

TC F8

FLEXSYS F212

TE M10

TC F8

FLEXSYS F315

TE M10

TC F8

INSTALLATION

COVERS

WB 09 WB D10

TT OP10

WB 09 WB D25

OPERA BLACK LINE 710 BL, 910 BL 712 BL, 715 BL, 912 BL, 915 BL

OPERA DX

TC S15H RC MS12-SUBH

SUB 18H

DS2-S DS2

TC S18H RC MS12-SUBH

SUB 28D

AFL 01

TC S28D

SUB 12D

AFL 01

TC S12D

SUB 05D

AFL 01

TC S05D

SUB 808D

AFL 01

TC S808D

SUB 15D

DS2-S DS2

TC S15D

SUB 18D

DS2-S DS2

TC S18D

ACCESSORIES

COVERS

R4 HT R4 PT R4 HM R4 CM

TC R4

INSTALLATION

COVERS

READY 4 Mobile speaker

MINIBOX MINIBOX L160D

WB11 WB 03W WB 03 SN130

MINIBOX K70

WB11 WB 03W WB 03

MINIBOX K162

WB11 WB 03W WB 03 SN130 AK 50

TT 06

MINIBOX K162

WB11 WB 03W WB 03 SN130 AK 50

TT 06

INSTALLATION

COVERS

ARENA

TT OP25

INSTALLATION

COVERS

ARENA 10 ARENA 10 PRO

TE M8 WB A810 WB 09 WB A10

ARENA 12 ARENA 12 PRO

TE M10 WB 09 WB A12

ARENA 15 ARENA 15 PRO

TE M10 WB 09 WB A15

TT OP08

WB 09 WB D10

TT OP10

510 DX, 710 DX, 910 DX

WB 09 WB D25

TT OP25

INSTALLATION

COVERS

CROMO 8+

WB 09

TC CR08

CROMO 10+

WB 09

TC CR10

CROMO 12+

WB 09

TC CR12

ACCESSORIES

COVERS

DS2-S DS2

TE M8 WB A810 WB 09 WB A8

WB 09

CROMO+

SUB

ARENA 8 ARENA 8 PRO

510 DX, 710 DX, 910 DX

508 DX

INSTALLATION

SUB 15H

ARENA SW15 ARENA SW15 PRO

DS2

TC SW15

ARENA SW18 ARENA SW18 PRO

DS2

TC SW18

dBTechnologies

dBTechnologies Deutschland GmbH

RCF USA Inc.

Italy & International sales

Germany, Belgium, Netherlands, Luxembourg

USA sales

Via Brodolini, 8 - Loc. Crespellano

Hansestrasse 93

110 Talmadge Rd.

40053 Valsamoggia (BO) ITALY

51149 Kรถln

08817 Edison, NJ USA

Tel +39 051.969.870

Tel. +49 (0)2203 925370

Tel. +1 732-9026100

Fax +39 051.969.725

Fax. +49 (0)2203 9253773

Fax. +1 732-9026105

info@dbtechnologies-aeb.com

verkauf@dbtechnologies.de

info@rcf-usa.com

A.E.B. Industriale Srl