Rental & Installation
The sound of experience DVA T12 Digital Vertical Array Digital Vertical Array DVA T12 - 3-Way Active Line Array Module DVA T12 -Performance & Control DVA T12 - Components DVA T12 - Flying, Stacking, Handling DVA T12 - Software DVA T4 - 3-Way Active Line Array Module DVA T4 - Advanced Amplification DVA T4 - Components DVA T4 - Flying, Stacking, Handling DVA - Accessories
03 04 06 08 10 12 14 15 16 18 19
Active Subwoofer The Subwoofer Company Features S30N Subwoofer S2825N Subwoofer S1518N Subwoofer S1521N Subwoofer S20 Subwoofer S10 Subwoofer S09 Subwoofer S08 Subwoofer
20 22 23 24 25 26 27 28 29
DVX. Active Speaker Series Features digipro®G2 - Amp Technology DVX D8 HP DVX D10 HP DVX D12 HP DVX D15 HP DVX Accessories DVX DM28 DVX DM12 DVX DM15
30
32 34 35 36 37 38 39 40 41
DWS800. The digital UHF broadband wireless system Features 42
0
LANXESS Arena, Cologne
DVA Digital Vertical Array DVA. The Digital Vertical Array. Line array technology has revolutionized sound reinforcement, particularly for large venues and events. Arraying several speaker cabinets vertically is a far more effective method of delivering and directing sound. Line array‘s signal levels do not drop off as steeply with increasing distance as is the case with conventional systems. What‘s more, their patterns of throw are very wide despite the systems‘ lean configurations. Until recently this technology saw limited use mainly in large, elaborate, and costly projects and installations. But with arrival of DVA, true line array technology is now available for a wide range of portable and permanent sound reinforcement applications. Factoring all the many different parameters and users‘ needs into the design equation, the dBTechnologies team of engineers developed a line array system that is easy to configure, exceedingly light, and tremendously versatile. What‘s more, the managed to take all these vital criteria into account without imposing limits on curving capacity and the number of arrayed components. Called DVA, this system makes the most of line array technology‘s considerable audio benefits. Leveraging state-of-the-art technologies, materials, and many years experience developing powered speaker systems, dBTechnologies has turned up a line array series that raises the performance bar for handling, versatility, and return on investment. dBTechnologies has a competitive edge. Our engineers‘ deep insight into power electronics, DSP programming, acoustics, mechanics, materials, and manufacturing practices enables us to independently develop innovative solutions in each of these areas. Such comprehensive R&D proficiency puts us in a unique position: We are able to transform inspired ideas into premium-quality products that deliver outstanding performance at an unrivalled pricepoint. The DVA series stands as a shining example of this all-around ability. Nowhere are the benefits of integrated amps, active crossovers, and processor-driven control more apparent than in DVA three-way line array units. • Fully powered units, freely scalable to setups of any size • None of the impedance and amp channel availability concerns associated with passive models • Lossless signal path with no need for speaker cables • Extremely tough yet remarkably light enclosures • Digital controller (DSP) onboard for utmost operating safety
0
DVA T12 – 3-Way Active Line Array Module T12 – 3-Way Active Line Array Module DVA T12 is a step up the evolutionary ladder from the successful DVA T4 line array system. Although it provides more power and has greater range, its active three-way design makes it just as easy to set up and install as its predecessor. The DVA T12 features state-of-the-art neodymium speakers and high-performance digital amps with total of 1,410W output power. In combination with top-drawer DSP and premiumquality AD-DA transformers, it delivers high-definition sonic images with massive SPL for large sound reinforcement applications. Weighing just 29 kg, this remarkably compact unit belies its unobtrusive look by enabling you to set up very powerful line arrays that deliver extraordinary performance.
DVA T12. Technical data Acoustical data Frequency Response [+/- 3dB] Max SPL HF Type HF Voice Coil HF Directivity Horn MF Type MF Voice Coil MF LF Type LF Voice Coil LF
04
60 - 19.000 Hz One Unit: 136 dB 3x1“ hornloaded Neodymium Compression Driver 1.4“ 100x10 ° Integrated CD Horn 2x 6.5“ hornloaded Neodymium 2“ 12“ bandpass Neodymium 3“
Amplifier Amp Technology Amp Class Power Supply HF Amp MF Amp LF Amp Cooling
digipro®G2 Class D 1500 W, PFC SMPS 350 W/RMS 350 W/RMS 710 W/RMS Convection
Processor Controller AD/DA Converter System Presets Limiter Crossover Frequency MF-HF
DSP 56 bit 24 bit/96 kHz 8, HF/Low-mid correction Dual Active Limiter, Multibandlimiter RMS, Peak, Thermal 1800 Hz
• Long-throw system • Fully powered three-way unit, freely scalable to setups of any size • Lossless signal path with no need for speaker cables • None of the impedance and amp channel availability concerns associated with passive models • Sequentially configurable array segments • High-end digital controller (DSP) on board • Network-ready with an integrated RDnet port • Hardware compatible with DVA T4 systems
DVA T4, DVA T12 Product-Demo
Slope MF-HF Crossover Frequency LF-MF Slope LF-MF
24 dB/Octave 420 Hz 24 dB/Octave
Input Section Signal Input Network Update and service Input Dynamics Power Socket Voltage Range
1x XLR fem, sym RDnet, RJ45 USB 136 dB 1x Powercon In 1x Powercon Out 90 - 240 V
Mechanics Housing Internal Structure Housing Design Color Handles Front Grille Rigging Points Splay Angles Width Height Depth Weight Accessories
Polypropylen PP Aluminium reinforced Trapezoidal 10° Black 1x per side 1.5mm metall grille with acoustic foam in back Integrated rigging hardware 0-1,5 -3-4,5-6-8-10° 580 mm (23.2 in) 386 mm (15.44 in) 430 mm (17.2 in) 29,9 kg (63.93 lbs) DSA-4 Pole mount adaptor DRK-20 rigging frame
05
DVA T12 Top performance paired with total control digipro®G2 digital power amps Compact yet remarkably powerful The DVA T12 sports three Class-D digipro®G2 power amps, one for each signal path. They deliver 710W to the 12“ woofer and 350W each to the two 6.5“ midrange woofers and three 1“ drivers. Embodying the latest advance in digital high-performance amps, the technology behind digipro®G2 pairs maximum power with minimum weight and size. The amps‘ remarkable power translates to massive SPL and unprecedented dynamic response and transparency, supported by with muscular low-end performance even in compact systems • 1410 W Class-D power amps • High performance and transparency with true dynamic response
Effortless setup, configured at the touch of a button The DVA T12‘s DSP offers eight system presets that adapt the unit to its assigned task in the array. They tweak the gain structure and EQ for the near-field/ midfield and far-field positions to compensate for high frequencies absorbed by air, and for low/ midrange frequency coupling as the array length increases. No further manual adjustments are necessary. All presets may be selected using the rearmounted rotary encoder or downloaded from a PC using RDnet software. • Simplest system configuration • Very fast setup
High-performance DSP for stellar dynamics and authenticity The DVA T12‘s signal processor and AD/DA converter were engineered to achieve transcendent sound quality with great dynamic range and fidelity. To this end, it features 136-dB input dynamic range and 56-bit digital signal processing at a sampling rate of 96 kHz. The DSP offers a full set of signal processing features. The toolbox includes top-drawer crossovers with steep slopes and all the EQ functions you need for the given signal path. It aligns phases and time, and provides digital peak, RMS, and thermal limiters for maximum headroom, performance, and operating safety even at peak levels. • Excellent audio specs • Perfect system equalization
0
Keeping it safe with switched-mode power supplies featuring PFC The DVA T12‘s power-plant is an independent network equipped with the latest IT technology to achieve maximum safety, efficiency, and performance. A secondary power supply feeds five microcontrollers and the DSP, and serves to ramp up check routines and the main power supply. A smart IPOS™ (Intelligent Power-On Sequence) circuit controls the sequence in which the main power supplies of all DVA T12 units within an array ramp up. It staggers the timing ever so slightly to keep the overall system‘s inrush current low. The main 1,500W SMPS power the amps. Their PFC (power factor correction) capability enables the system to run on mains voltages from 90V and 265V without any manual adjustments. This ensures peak performance even under adverse conditions, for instance at gigs where lengthy power feeds cause voltages to drop. This is yet another area in which digipro®G2 outperforms conventional amps. With more than 90% yield, it is so very efficient that it does not require fans, making it an even safer and totally maintenance-free amp. • Wide-range 90V - 240V SMPS • IPOS™ circuit for low inrush current
Integrated LDN for utmost reliability Reliability is a top priority in modern PA systems. This is why the DVA T12 comes with a fast and efficient local data network (LDN) comprising a main CPU and four ancillary CPUs. Each microprocessor manages its assigned component, for example, the HF amp, processing temperature, voltage, current, impedance, input, output, and other data independently and continuously. The main CPU captures and evaluates the ancillary CPUs‘ data streams in real time, detecting problems such as an internal defect in a power amp channel or speaker. Only the affected channel is muted to prevent noise. Temperature is monitored constantly. The power amp does not shut down if the temperature rises above the defined limit. Instead, the input level is attenuated in small temperature-contingent increments to allow the amp to cool down. The main CPU tracks the operating status, recording this data in a log file that may be exported via the USB port on the rear panel. If the RDnet is up and running, the T12 even sends an error report to the PC, which speeds up and simplifies considerably the task of servicing the module. • Real-time operating status monitoring • Log file for status reports
0
DVA T12 Components of consummate quality Components of consummate quality The global group of dBTechnologies companies develops and manufactures individual speaker components autonomously, and often specifically for the given application. We do not subscribe to the practice of equalizing and optimizing speakers with elaborate technology to bring them up to our standards. Instead, it has been our long-standing policy to build from the bottom up components with specs tailored to deliver the best audio performance for the application. Take, for example, the DVA series: We teamed up with our eminent affiliate RCF® to develop speaker components unrivalled in this class. Made of highestquality materials such as Mylar and titanium and featuring neodymium magnets, DVA series components deliver extraordinary performance, high SPL, and lowest distortion. And they‘re surprisingly light to boot.
Accurate and awesomely efficient midrange response The DVA T12‘s two 6.5“ neodymium woofers are placed close together to maximize coherent coupling and response for those critical midrange frequencies. The speaker resides in a sealed basket to optimize the displacement volume. This makes the woofer even more responsive. With a high BL factor, it reacts far faster to transients and renders each attack with awesome accuracy. Both 6.5“ woofers are equipped with an optimized phase plug and feed into a frontloaded horn to achieve a uniform coverage pattern. • Three 1“ neodymium HF drivers • Extended range
High-definition top end The 1“ neodymium HF drivers feature 1.5“ Mylar diaphragms. Exceptionally light and responsive, they deliver richly detailed signals with remarkably linear frequency response. Specially developed for use in line arrays, these ultra compact drivers may be deployed in very close proximity to one another. This is essential to minimize interference in such arrays. The DVA T12 is loaded with three HF drivers tuned specifically for the custom-designed array horn. This combination maximizes the coupling of the drivers‘ outputs and extends the range of the HF signal. • Three 1“ neodymium HF drivers • Extended range
0
Tough, light hybrid polypropylene enclosure The DVA T12‘s housing marks a milestone in the development and manufacture of polypropylene enclosures. Its surface is immune to knocks and scratches, and fully resistant to water and moisture. A sophisticated internal bracing system reinforces the housing and minimizes resonance. The DVA T12 also features an aluminum endoskeleton that connects components and further reinforces the housing. The cabinet‘s elaborate, heavy-duty construction makes it a rugged and road-ready unit that lives up to the highest standards for weather-proofing. A rain cover integrated into the rear panel protects circuitry and connections so this powered unit may be deployed in virtually all conditions. • Aluminum-reinforced polypropylene housing • Light yet exceedingly durable
Consistent coverage pattern The DVA T12 features constant directivity horns, HF drivers, and midrange woofers optimized to deliver a uniform 100°-by-10° coverage pattern. The DVA makes the most of two acoustical effects to help distribute SPL evenly. One is the vector addition of individual horns‘ output, with the other being cylindrical wave formation. The coverage pattern may be adapted to suit the sound reinforcement application by varying the length of the array and adjusting the splay between individual components. • Uniform 100°-by-10° coverage pattern • Evenly distributed SPL
Extended low-end performance A 12“ neodymium woofer in a band-pass housing covers the low frequency range. Remarkably powerful, it packs an assertive punch that reaches down to 60 Hz to enable fullrange applications. The 12“ woofer is slanted inside the housing, lending the cabinet a lean, unobtrusive look. • 12“ neodymium woofer • Fullrange capability from 60Hz up
0
DVA Handling, stacking, and flying the T12 Rigging hardware built in The DVA T12 features built-in precision rigging hardware with stainless steel quick-release pins so that no external hardware is required. The splay between enclosures may be adjusted in 1.5° and 2° increments to configure the array and align the system‘s coverage pattern.
An easier way to fly With each unit weighing just 29.9 kg, the system is easily and quickly set up. The curvature is adjustable from 0° to 10° in 1.5° and 2° steps. A line array system delivers its best performance when flown, so flying the rig is always the first choice. The DRK-20 rigging frame accommodates up to 20 flown DVA T12 modules. It is equipped with precision inclination-adjusting rails enabling the stack to be flown from a single pick-point.
DRK-20 Rigging frame
The DAS-4 adapter attaches to the bottom cabinet and secures the rig to the truss with half-couplers and a pipe. We recommend using this adapter to prevent the stack from twisting and swinging. • Lightweight solution for single-point loads • Precision alignment
The combination of DVA S10 subwoofers and DVA T12 mid-/high-range units packs plenty of power, punch, and range to render signals across the full frequency spectrum. This setup is the preferred option in venues where bass bins cannot be set on the floor, or where optimum coverage for bleachers or balconies is desired. You can fly bass bins to lengthen the array and extend the near-field, achieve even better acoustical coupling, and maximize the various signal paths‘ time alignment. • Extendable with flown bass bins
Ground stacks
Compatible with DVA T4 units
DRK-10 and DRK 20 harnesses can also serve to stack cabinets on the ground when rigging points are unavailable or the ceiling is too low. A special bracket adjusts the inclination down to 7.5°. The DRK-10/20 fits perfectly on an upright DVA S30 subwoofer. Equipped with two receptacles for quick-release pins, it is readily attached without tools.
DVA T12 and DVA T4 series housings and rigging hardware are compatible. This means DVA T4 units may be flown right below a T12 array for use as down-fills in large PA systems.
The DVA S30 subwoofer sports two 18“ speakers, a bass reflex horn, a 3000W power amp, and an internal DSP. (To learn more about it, see the chapter entitled Active Subwoofer).
For an added acoustical benefit, both systems‘ driver sections are in line so that they generate phase-correct high-frequency additions. • Compatible DVA T4 can serve as down-fill extension in large systems
• Line array benefits in ground-stacked configurations
T4 downfill with in phase horn allignment
Power supply
Transport
The PFC switched-mode power supply allows up to four DVA T12 units to be connected to one phase. When connecting large systems (up to 12 units), we recommend splitting up the power feed using a 16A CEKON adapter, tapped and spliced to feed three weatherproofed PowerCon connectors. The cable measures 15 m.
The heavy-duty transport and storage case accommodates three DVA T12 modules including cables and one rigging harness. All angles and presets may be adjusted with the units remaining in the case.
DVA Software RDnet for networked remote surveillance and control Factory-equipped with an RDnet port, the DVA T12 is ready for integration into complex, remotely controlled and monitored DVA sound reinforcement systems. RJ45 inputs and outputs connect it to the RDnet hub. The RDnet link enables the sound tech to adjust presets, levels, and all other key parameters conveniently at the FOH location. The tech‘s PC receives data concerning temperature, limiter status, levels, and all further operating parameters in real time. The RDnet HUB interfaces with the PC via LAN, WLAN, or USB. All the necessary adjustments for the individual DVA T12 modules may be made off-line when planning the sound reinforcement system. The stored program can be transmitted if the system is already installed on site.
RDnet lets you: • Monitor levels, limiters, and temperatures • Select system presets • Configure setups off-line • Mute units • Group modules • Test individual components • Automatically address system components • Tap into LAN and USB interfaces • Extend the network via wireless LAN access point Often a large PA system must be adapted to meet different needs during an event. Some areas may no longer require coverage, or a different type of performance necessitates a different setup. This system can be adapted any time within seconds via RDnet. The DVA T12‘s low-end complement is the equally network-ready DVA S30 subwoofer. It sports two 18“ woofers, a bass reflex horn, and a 3kW power amp. To learn more about it, see the chapter entitled Active Subwoofer. • Management and surveillance from the FOH location • Off-line configuration
RDnet - Control 2 RDnet - Control 8
DVA Composer DVA Composer is an easy-to-use software program for configuring and aiming T4 and T12 units in line arrays. A pragmatic application rooted in realworld practices, it is designed for intuitive handling. It determines the optimum angles and system preset based on the array height, desired range and number of DVA components entered by the user. Other configurations - a J shape, curved array, and hybrid – may be selected to further adapt the system to suit the given venue. DVA Composer also computes subwoofer configurations and determines the directivity of low frequencies based on the type of setup and number of systems. This insight helps audio engineers plan and deploy PA systems • Fast and intuitive • Subwoofer configurator
DVA Composer System Setup
DVA Composer Subwoofer Design
DVA T12/T4 GLL for EASE GLL files for the DVA T12 and the DVA T4 are available as plug-ins for EASE and EASE Focus, two of the most popular professional simulation applications. They let you generate 3D acoustical models to map out throw patterns and sound pressure levels when planning complex sound reinforcement projects. EASE Focus freeware comes in very handy indeed: It realistically simulates live sound systems in challenging venues such as stadiums and theaters with several different audience areas that need coverage. EASE Focus lets you configure and simulate very large PAs that incorporate ancillary systems such as delay towers, side-hangs and front-fills. • 3D simulation • Planning tool for complex sound reinforcement scenarios
13
DVA T4 – 3-Way Active Line Array Module 3-Way Active Line Array Module A three-way active line array system, the DVA T4 has set new standards in the sound reinforcement industry since its 2007 market launch. Better yet, it has brought the benefits of real line array technology to a much wider range of users. More than 20.000 DVA T4 modules have shipped as of March 2012. Equipped with top-notch features and engineered for maximum versatility, the DVA T4 delivers premium performance and ensures excellent return on investment. • 8 modules (2 m array) connected to one 16A phase place just 125 kg load on the pick-point • Fully powered units, freely scalable to setups of any size • Lossless signal path with no need for speaker cables • None of the impedance and amp channel availability concerns associated with passive models • Sequentially configurable array segments • Digital controller (DSP) onboard for utmost operating safety
DVA T4. Technical data Acoustical data Frequency Response [+/- 3dB] Max SPL HF Type HF Voice Coil HF Directivity Horn MF Type MF Voice Coil MF LF Type LF Voice Coil LF Amplifier Amp Technology Amp Class Power Supply HF Amp MF Amp LF Amp Cooling
14
80 - 19.000 Hz One Unit: 128 dB 2x1“ Neodymium Compression Driver 1.4 “ 100 x 15 ° Integrated CD Horn 6.5“ Neodymium, Sealed Basket Phase Plug, Horn Loaded 1.5“ 8“ Neodymium 2.5“ Digital Class-T, var. clock frequency Class D with PFC SMPS 100 W/RMS 100 W/RMS 220 W/RMS Convection
Processor Controller System Presets Limiter Crossover Frequency MF-HF Slope MF-HF Crossover Frequency LF-MF Slope LF-MF Input Section Signal Input Input Sensitivity [dBu] Signal Output Power Socket Voltage Range Mechanics Housing Housing Design Color Handles Front Grille Rigging Points W x H X T Weight Accessories
Analog Devices, DSP 24 bit/48 kHz 8, HF/Low-mid correction Dual Active Limiter, Multibandlimiiter RMS, Peak, Thermal 1800 Hz 24 dB/Octave 400 Hz 24 dB/Octave 1x XLR fem, sym -00 - Max -2 dBu 1x XLR male, sym. 1x Powercon In, 1x Powercon Out 90 - 240 V Polypropylen PP Trapezoidal Black, White 1x per side 1.5mm metall grille with acoustic foam in back Integrated rigging hardware 580 mm (23.2 in) x 240 mm (9.6 in) x 327 mm (13.08 in) 13.8 kg (30.42 lbs) DSA-4 Pole mount adaptor for 2 DVA T4, DRK-10 rigging frame for 16 DVA T4, DRP Rain Cover
Advanced amplification. Innovative digital amps, analog sound
PFC-Switchmode supply
The DVA T4 is equipped with unique digital power amps that provide a total of 420W RMS. Driven by Class-T™ technology, their resolution is several-fold that of conventional digital amps. They render signals very accurately with this high-definition audio capability. Sonic images are almost impossible to distinguish from those of analog sources, even in the HF range. The amps are equipped with high-quality delta-sigma converters.
The DVA T4 has an integrated active PFC-Switchmode supply. It is very lightweight and has an effi ciency of almost 90%, which enables up to 8 DVA T4 to be driven safely on only one 230V/16A wire.
Another advantage of these state-of-the-art digital amps is their remarkable efficiency, which is far greater than 90 percent. Without fans built in to cool the amps, they run quieter and weigh less. This audiophile performance comes in a very petite package: One T4 unit weights just 13.2 kg. This makes it a treat to handle and allows it to be flown from pick-points with less load-bearing capacity.
• Wide-range 90V - 240V switched-mode power supply
The supply works on voltages from 85-260V, so it will accept all different mains worldwide, even under the worse conditions.
• Highly efficient digital power amp • Very low weight
Sweeping dynamic range
Integrated DSP for utmost reliability
The DVA T4‘s digital power amp features DPP™ (Digital Power Processing) technology and a multiband compressor/ limiter with separate response curves for each signal path. Its dynamic range is exceptionally wide.
Alongside the multiband compressor/ limiter, the T4‘s analog input section also sports an analog limiter to maximize signal conditioning and operating reliability.
For example, headroom in the middle and high-frequency bands ranges up to 22dB. This innovative circuitry not only maximizes dynamic response, it also ensures signals are rendered accurately and uniformly even at threshold levels.
The integrated DSP not only performs audio tasks, it also monitors the entire power amp. If, for example, it detects an internal defect in a power amp channel, only this channel is muted to prevent noise.
Easy Setup
The DSP also monitors continuously the power amp‘s temperature. If the temperature rises above the defined limit, the power amp does not shut down. Instead, the input level is gradually attenuated in temperature-contingent increments.
The DVA T4‘s DSP is equipped with various system presets that configure the unit for its assigned task in the array. They adjust the gain structure and EQ to the near-field/ midfield and farfield positions to compensate for high frequencies absorbed by air and for low/ midrange frequency coupling as the array length increases so that further manual adjustments are necessary.
DVA T4. Also available in white.
15
DVA Components of consummate quality Components of consummate quality We teamed up with our eminent affiliate RCF® to develop speaker components unrivalled in this class. Made of highest-quality materials such as Mylar and titanium and sporting neodymium magnets, the DVA T4 delivers extraordinary performance, high SPL, and lowest distortion - all in a package that weighs just 13.8 kg.
Constant Directivity The DVA T4 Top is equipped with a constant directivity horn for the High and Mid section and offers a nominal coverage angle of 100°x15°. The CD-Horn provides high flexibility and a good natured attitude if for instance the Array is not aligned correctly. The DVA uses apart from the formation of cylindrical waves (very much depending on the number of T4 elements) the vector summing of the individual horns. This means that with growing distance to the source (if set up correctly) the listener perceives more and more vector sums of the single elements. However it has to be considered, that the fewer elements are used to spread the sound to a specific area, the stronger must be the curving of them. That’s how the effect of optimised SPL distribution is managed.
State-of-the-Art Drivers The build in 1”Neodymium- Drivers are equipped with a 1.4” Mylar- Membrane which allow a very quick response and provide a linear frequency range at a surprisingly low weight. This driver was specially designed for the use with Line-Arrays. Its compact measurements allow very close proximity which is a main factor for minimum interference.
Reliability The 8“ Neodymium-Woofer is equipped with a high power 2.5“ voice coil to provide superior sound pressure level in a very compact size.
High Efficiency The 6.5“ Neodymium-Midrange speaker has a sealed basket to provide an optimized volume capacity including high sensitivity and superb sound reproduction. It also has a horn exit including phase plug for defined and linear sound emission.
DVA Flying, stacking, handling Handling, stacking, and flying the DVA T4 The DVA T4 Line-Array element has a sensational weight of only 13,2kg. The obvious advantage for handling and transport also makes flying possible where under normal circumstances the trussing is not strong enough to support also flying of the audio devices - an Array of six T4 Tops therefore weighs less than 120 kg.
Groundstacking In case there are no possibilities to fly the system or the ceiling of the venue is not high enough, the DRK-10 can be used for groundstacking too. A special bracket provides an inclination up to 7.5°. The DRK-10 fits exactly onto the surface of an upright positioned DVA S20 subwoofer and can be mounted by two M10 threads on top of the sub.
The combination of a DVA S10 subwoofer and a DSA-4 pole mount adaptor holding up to three DVA T4 mid-/high-range units is a great solution for smaller applications and for delay zone sound reinforcement. The continuously adjustable DSA-4 adaptor lets you aim the mid-/high-range units.
Flying the cabinets
DRP Rain protection
The DVA T4 comes with precisely engineered flying hardware. The hardware in combination with the extremely low weight of a T4 top allows easy and fast setup of the whole system. The curving can be adjusted in steps of 2.5° within a range of 0° and 15°. For an optimum of performance the system should be principally flown. The DRK-10 flying frame holds up to 16 T4. For professional handling the frame is well balanced and the angle of inclination can be corrected with the upper rear flying rails. The DAS-4 adapter attaches to the bottom cabinet and secures the rig to the truss with half-couplers and a pipe. We recommend using this adapter to prevent the stack from twisting and swinging The combination of DVA S10 subwoofers and DVA T4 mid-/high-range units in a flown array packs a mighty fullrange punch with serious SPL. This setup is the preferred configuration in venues where you are unable to place bass bins on the floor or where you wish to cover bleachers or balconies.
Zubehör Accessories Transport For an easy transport of 3-4 DVA T4 elements, the DTF-4 dolly is optionally available. In this case, the Array is directly fixed by the flypins onto the dolly. A separate fixture for the flybar is integrated. The DWK-4 is fitted with four Bluewheels and can be equipped either with a protection cover or, after dismantling the wheels, mounted onto the bottom of a flight case. This frame can also be used for groundstacking for 1 to 4 DVA modules, for example for upward sound distribution to the stand of a football stadium or as a nearfill at front stage
DSA-4 Pole Mount Adaptor The DSA-4 Pole Mount Adaptor holds up to three DVA T4 modules on single pole. A set screw adjusts the tilt angle smoothly rather than in stepped increments, enabling ultra-precise alignment. A scale on the side of the adaptor indicates the selected angle. Paired with an S10 subwoofer, this adaptor makes it so easy to set up three-way systems for smaller applications.
DRP Rain protection The optional DRP rain protection can be easily clipped onto the backpanel of the T4 units to protect the amplifier and connectors against wetness.
Wall mount DWB-3 The DWB-3 wall mount is designed specifi cally to attach cabinets to walls for fi xed installation. It accommodates up to three DVA T4 mid-/highrange units.
Rigging-Tower For Arrays of a maximum of 8DVA T4 tops, dBTechnologies offers with the DRL-45 an optional, compact and cost effective rigging tower. The tower takes up to 300 kg and offers a maximum height of 4.50 m. A flight case for the DRL-45 is included.
DVA. Active Subwoofers
dBTechnologies. The Subwoofer Company High-performance bass woofers
Built tough for touring
DVA bass bins are loaded with state-of-the-art, high-performance subwoofers. Equipped with light neodymium magnets and voice coils with diameters up to 4“, these units‘ load handling capacity is extremely high, and their transient response is remarkably faithful.
Made of sturdy birch multiplex covered in robust black textured lacquer, the subwoofer housing is fronted with a rugged speaker grille. The enclosure is easy to tote with its comfortable carrying handles.
The dual ventilation system minimizes heat buildup and power compression while helping to maximize loading handling capacity and reliability. The woofers feature a fiberglass-reinforced diaphragm, an exceedingly robust triple-roll surround, and a geometrically optimized cone. All this culminates in peak-to-peak excursion capabilities ranging up to 48 mm.
Optional dust covers protect it on the go. With 16 threaded bushings each on their rear panels, the S09, S10 and S20 bins are ready to accept Blue Wheels. Retrofitted with the appropriate fly kit, S09 and S10 subwoofers are easily rigged and flown.
High-performance digipro®G2 Class-D power amp These subwoofers are driven by digipro®G2 digital power amps with up to 3000W output. digipro®G2 technology is so very efficient that it does not require fans. With no moving parts to tend to, these amps are altogether maintenance-free. Equipped with PFC switched-mode power supplies, they are largely impervious to line voltage fluctuations, which is a tremendous asset in a touring rig. digipro®G2 technology also has the weight advantage. Factor the neodymium magnets into the equation and you get a remarkably light and lean rig that couldn‘t be easier to transport and set up. PowerCon In and Out* connectors provide mains power to the subwoofers.* *S20 and S30N do not feature PowerCon ports.
High-quality DSP and RDnet Our network-enabled DVA subwoofers are designated by an “N” in the product name. They feature a premium-quality DSP boasting excellent audio specs with variable crossover frequencies, precise limiter functions and adjustable delay settings for perfect time alignment. A special preset makes it easy to set up cardioid systems with enhanced directivity. Settings are readily adjusted using the rear-mounted rotary encoder. The DSP also provides an X-Over output for connecting satellites (in stereo on S08 and S09 units). Factory-equipped with an RDnet port, these subwoofers are ready for integration into elaborate, remotely controlled and monitored DVA T12 sound reinforcement systems via RJ45 inputs and outputs that connect the units to the RDnet hub.
S30N Subwoofer DVA S30N Subwoofer, 2x18“ Bassreflex Featuring a dual 18“ subwoofer pairing in a bass reflex housing, the DVA S30 packs a muscular, ultra lowfrequency punch. It delivers very powerful performance indeed with a range extending down to the lowest frequencies. This sub-bass powerhouse is the perfect addition to large PAs and an excellent complement to DVA T12 mid-/high-range units in stacked arrays
Bass reflex horn housing This sophisticated hybrid design brings together the benefits of bass reflex and horn systems in a compact housing engineered to render low frequencies with high SPL. The two baffle boards are arrayed in the form of a V. They guide the central bass reflex channel‘s sound energy into the horn‘s port. This funneling action is smooth and uniform, greatly increasing its range. The high-quality birch multiplex housing is covered in robust black textured lacquer and equipped with eight grips. On the back is a transport dolly that removes easily via quick-release pins to keep the wheels from rattling.
SUB Dolly
DVA S30N Technical data Acoustical data Frequency Response [+/- 3dB] 30 - 120 Hz Max SPL 141 dB Directivity Omnidirectional, Cardiod Option with DSP setup LF 2x18“ Type LF Neodymium Voice Coil LF 4“ Amplifier Amp Technology digipro® G2 Amp Class Class D Power Supply 3 kW SMPS LF Amp 3000 W/RMS Cooling Convection Processor Controller DSP 56 bit AD/DA Converter 24bit/ 96 kHz Network RDnet System Presets X-Over Delay Phase 0, 180 ° Limiter RMS, Peak, Thermal
Delay Option Crossover Frequency LF-MF Slope LF-MF Input Section Signal Input Signal Output Power Socket Voltage Range Mechanics Housing Housing Design Color Surface Texture Handles Pole Mount Front Grille Castors W x H x D Weight Accessories
0-4.5 ms internal DSP, steps of 5 Hz 24 dB/Octave 1x XLR fem, sym. 1x Link XLR, male, sym 1x X-Over Out, XLR male, sym. Powercon In 90 - 240 V Multiplex birch plywood Rectangular Black, white Textured acrylic lacquer 4x Per Side No 1.5mm metall grille Optional 4x 100mm blue wheels or optional SUB dolly 1100 mm x 580 mm x 720 mm 72 kg (158.73 lbs) SUB dolly, rain cover
DVA S2585N Subwoofer DVA S2585N Subwoofer, 18“/15“, Cardiod The DVA S2585N is a compact subsystem featuring a cardioid layout designed for utmost directivity. The system consists of two separate chambers, one loaded with a forward facing 18“ woofer and another with a rearward facing 15“ woofer. The integrated digipro®G2 digital power amps provide 2500W total output power. The high-quality DSP filters signals and controls the speakers to deliver a remarkably authentic audio image and faithful transient response. The housing is ready to fly – the optional SRK10 Rigging Kit is all it takes to put up flown cardioid sub arrays.
Cardiod- Design Many systems lack low-frequency directivity and, as a result, are plagued by interference and annoying noise. The S2825N, in contrast, was engineered specifically for enhanced low-frequency directivity. And it not only sounds great, it is also easy to handle and transport.
DVA S2585N Technical data Acoustical data Frequency Response [+/- 3dB] 35 - 120 Hz Max SPL 140 dB Directivity Cardiod LF 1x 18“ front, 15” back Type LF Neodymium Voice Coil LF 4“ Amplifier Amp Technology digipro® G2 Amp Class Class D Power Supply 1.5 kW + 1 kW SMPS LF Amp 1500 W/RMS + 1000 W/RMS Cooling Convection Processor Controller DSP 24bit/ 96 kHz Network RDnet System Presets X-Over, Phase, Delay Phase 0, 180 ° Limiter RMS, Peak, Thermal Delay 0-4.5 ms internal Crossover Frequency LF-MF 75-120 Hz, steps of 5 Hz Slope LF-MF 24 dB/Octave
Input Section Signal Input 1x XLR fem, sym. Signal Output 1x Link XLR, male, sym 1x X-Over Out, XLR male, sym. Power Socket Powercon In Voltage Range 90 - 240 V Mechanics Housing Multiplex birch plywood Housing Design Rectangular Color Black Surface Texture Textured acrylic lacquer Handles 3x Per Side Pole Mount M20 Front Grille 1.5mm metall grille Castors Optional Width 515 mm (20 in) Height 640 mm (25.2 in) Depth 100 mm (39.4 in) Weight 65 kg (115.5 lbs) Accessories SUB dolly, rain cover, SRK10 rigging kit
DVA S1518N Subwoofer DVA S1518N Subwoofer, 18“, Bandpass The DVA S1518N is a bandpass subwoofer based on the DVA S10, but with 50 percent higher power amp output, an integrated DSP, and an RDnet link. A remarkably versatile subwoofer, it delivers tight and punchy bass response that supports and transitions smoothly to satellites’ lower midrange frequencies. The DVA S1518N is equipped with a next-generation, 18“ RCF® woofer driven by a built-in 1500W digipro® G2 digital power amp. Subwoofer arrays are easily flown using the optional SRK10 rigging hardware retrofit. The S1518N will also serve you well in compact stacks paired with DVA T12 and T4 units or DVX Series enclosures.
DVA S1518N Technical data Acoustical data Frequency Response [+/- 3dB] 39 - 110 Hz Max SPL 138 dB Directivity Omnidirectional, Cardiod Option with DSP setup LF 1x 18“ Voice Coil LF 4“ Amplifier Amp Technology digipro® G2 Amp Class Class D Power Supply 1.5 kW SMPS LF Amp 1500 W/RMS Cooling Convection Processor Controller DSP 24bit/ 96 kHz Network RDnet System Presets X-Over, Phase, Delay Phase 0, 180 ° Limiter RMS, Peak, Thermal Delay 0-4.5 ms internal Crossover Frequency LF-MF 75-120 Hz, steps of 5 Hz Slope LF-MF 24 dB/Octave
Input Section Signal Input 1x XLR fem, sym. Signal Output 1x Link XLR, male, sym 1x X-Over Out, XLR male, sym. Power Socket Powercon In and out Voltage Range 90 - 240 V Mechanics Housing Multiplex birch plywood Housing Design Rectangular Color Black Surface Texture Textured acrylic lacquer Handles 3x Per Side Pole Mount M20 Front Grille 1.5mm metall grille Castors Optional Width 510 mm (20 in) Height 640 mm (25.2 in) Depth 720 mm (28.3 in) Weight 46 kg (101 lbs) Accessories SUB dolly, rain cover, SRK10 rigging kit
DVA S1521N Subwoofer DVA S1521N Subwoofer, 21“ Bassreflex The DVA S1521N is a powered 21“ subwoofer housed in a bass reflex enclosure that we tuned for accurate, ultra low-frequency response. It readily integrates into large DVA and DVX Series PA systems as a sub-bass unit or as a stacked subwoofer. Made of durable birch multiplex covered in robust black textured lacquer, the high-quality housing provides six carrying handles, an M20 pole mount, and bushings on the rear panel that accept casters. Pick-points for attaching DRK-10 and DRK-20 harnesses are built into the top panel to enable easy, safe stacking.
Top-notch 21“ woofer Serving as the unit’s transducer is a state-of-the-art 21” woofer with neodymium magnets and a 4.5“ voice coil. This combination of high-quality materials and sophisticated magnetic drivers yields some pretty impressive results. Even very low bass frequencies are rendered with pinpoint precision and hairtrigger transient response, treating audiences to a breathtaking audio experience.
DVA S1521N Technical data Acoustical data Frequency Response [+/- 3dB] 30 - 110 Hz Max SPL 139 dB Directivity Omnidirectional, Cardiod Option with DSP setup LF 1x 21“ Type LF Neodymium Voice Coil LF 4.5“ Amplifier Amp Technology digipro® G2 Amp Class Class D Power Supply 1.5 kW SMPS LF Amp 1500 W/RMS Cooling Convection Processor Controller DSP 24bit/ 96 kHz Network RDnet System Presets X-Over, Phase, Delay Phase 0, 180 ° Limiter RMS, Peak, Thermal Delay Option 0-4.5 ms internal Crossover Frequency LF-MF 65-110 Hz, steps of 5 Hz Slope LF-MF 24 dB/Octave
Input Section Signal Input 1x XLR fem, sym. Signal Output 1x Link XLR, male, sym 1x X-Over Out, XLR male, sym. Power Socket Powercon In and out Voltage Range 90 - 240 V Mechanics Housing Multiplex birch plywood Housing Design Rectangular Color Black Surface Texture Textured acrylic lacquer Handles 3x Per Side Pole Mount M20 Front Grille 1.5mm metall grille Castors Optional Width 580 mm (22.8 in) Height 800 mm (31.5 in) Depth 720 mm (28.8 in) Weight 52.5 kg (115.5 lbs) Accessories Rain cover
S20 Subwoofer S20 Subwoofer, 2 x 18“ Bassreflex Featuring a dual 18” subwoofer pairing in a bass reflex housing, the DVA S20 delivers powerful performance, rendering frequencies as low as 25 hertz assertively and with impressive authority. It is the perfect sub-bass provider for DVA S10/T4 systems and an excellent complement to DVA T4 mid-/high-range units in stacked arrays. Thanks to the integrated Quick-Release-Pins, both DRK -10 and DRK-20 frames can be easily mounted to set up a ground stacked system.
S20 with 4 x DVA T4 Mid-High units
DVA S20 Technical data Acoustical data Frequency Range SPL Peak peak Woofer
35Hz–90 Hz or 120 Hz (+-3 dB) 138 dB 2 x 18“ Neodym with 4“ voice coil
Input section Input Parallel X-Over Input Sens.
XLR fem. sym. Output XLR male Output XLR male +4 dBu to –2 dBu
Soundprocessing Type X-Over frequency Time Alignment Protection Circuitry Limiter Phasereverse Switch
analog 90 Hz oder 120 Hz optional RFI, thermal analog limiter Yes
Amplification Type PSU Power Cooling Mains Powercon
Class-D switchmode supply 2000 Watt/RMS convection (fanless) In/Out 110 V/230 V switchable
Weight & dimensions Depth 700 mm Height 580 mm Width 1100 mm Weight 69 kg Housing birch multiplex Handles 8 Wheels prepared for 4 wheels Grill metal grill Colour black Accessories SDD Digital Delay Modul, Protective Cover
S10 Subwoofer S10 Subwoofer, 18“ Bandpass The bandpass subwoofer DVA S10 is equipped with a single 18“ RCF®- neodymium woofer of the newest generation, driven by a 1000W digitalpower amp. Using the optionally available flyware, up to two DVA S10 can be flown mounted to the DRK-10 rigging kit. Further the DVA S10 can be used as a compact PA system together with either 3x DVA T4 on a speaker pole or 2x DVA S10 and 4-6 DVA T4 as a Groundstack. Cardioid setup with the SDD module A cardioid setup comprising the SDD module and two or three DVA S10 subwoofers on each side keeps levels down on stage and affords you far greater control over low-frequency coverage in the audience area. Never before has this innovative solution – which until today required much greater effort and more elaborate gear – been so easy to achieve with such professional results. SRK-10 Fly Kit Retrofitted with the optional SRK-10 fly kit, the DVA S10 subwoofer is easily rigged to a DRK-10 harness and flown alongside further DVA T4/T12 mid-/ high-range units.
Cardiod Setup with SDD module
S10 flown with 6 x DVA T4 Mid-High units
DVA S10 Technical data Acoustical data Frequency Range SPL peak Woofer Input section Input Parallel X-Over Input Sens. Soundprocessing Type X-Over frequency Time Alignment Protection Circuitry Limiter Phasereverse Switch
40 Hz–90 Hz or 120 Hz (+-3 dB) 136 dB 1 x 18“ Neodym with 4“ voice coil XLR fem. sym. Output XLR male Output XLR male +4dBu to –2dBu
analog 90 Hz oder 120 Hz optional RFI, thermal analog limiter Yes
Amplification Type PSU Power Cooling Mains Powercon
Class-D Switchmode supply 1000 Watt/RMS convection (fanless) In/Out 110 V/230 V switchable
Weight & dimensions Depth Height Width Weight Housing Flying Handles Wheels Grill Colour Accessories
720 mm 640 mm 515 mm 46 kg birch multiplex Optional with S10 Fly Kit 6 prepared for 4 wheels metal grill black SDD Digital Delay Modul S10 Fly-Kit, Protective Cover
S09 Subwoofer S09 Subwoofer. A remarkably compact 15“ subwoofer in a band-pass design, the DVA S09 delivers true, tight, and punchy bass response. With a height of just 44 cm, it can be flown above DVA T4 modules to keep the rig‘s footprint inconspicuous. The S09 comes with two features that make it the perfect base for a high-quality satellite system, for example, when paired with the DVX D10. One is an integrated active stereo crossover with two cutoff frequencies to choose from, 90Hz and 120Hz. The other is a phase inversion switch. One PowerCon socket connects to the mains power supply, while two PowerCon outputs connect satellites. SRK-09 Fly Kit Retrofitted with the optional SRK-09 fly kit, the DVA S09 subwoofer is easily rigged to a DRK-10 harness and flown alongside further DVA T4 mid-/high-range units.
S09 subwoofer in white The DVA S09 subwoofer and rigging accessories are also in available white. The white enclosure comes without grips, conjuring a sleeker look suitable for permanent installation.
DVA S09 Technical data Acoustical data Frequency Range (+-3dB) 45Hz–90Hz or 120 Hz SPL peak 134 dB Woofer 1 x RCF 15“ neodymium with 4“ voice coil Stereo Input section Inputs 2 x XLR fem. sym. Outputs Link/xover 2 x XLR male Input Sens. +4 dBu to –2dBu Soundprocessing Type analog X-Over frequency 90Hz / 120Hz Time Alignment no Protection Circuitry RFI, thermal Limiter analog peak/RMS limiter Phasereverse Switch yes
Amplification Type Digipro® Class-D PSU Switchmode power supply with PFC Power 1000 Watt/RMS Cooling convection (fanless) Mains Powercon 1xIn/2x Out Weight and dimensions Depth 720 mm (28.35”) Height 440 mm (17.32”) Width 515 mm (20.27”) Weight 37,5 kg (82.5 lbs) Housing birch multiplex Pole Mount M20 Flying Optional with S09 Fly Kit Handles 4 Wheels prepared for 4 wheels Grill 1,5mm metal grill Colour black Accessories S09 Fly-Kit, M20 pole mount, DSA 4 pole mount adapter for DVA T4 units, Protective Cover
equipped with
S08 Subwoofer Subwoofer S08 Subwoofer.
The DVA S08 dp is a remarkably compact 12“ high power active bassreflex subwoofer for professional applications and to satisfy upmarket requirements. It delivers a high momentum and at the same time reproduces a punchy low end. Equipped with a 800W/RMS digipro® digital power amp including switch mode supply, this unit provides a high sound pressure level of up to 131dB. Furthermore there is a powercon in- and out for mains connection.
S08 Subwoofer with DVX D8 Mid-High unit
DVA S08 Technical data Acoustical data Frequency Response [+/- 3dB] Max SPL Directivity LF Type LF Voice Coil LF Amplifier Amp Technology Amp Class LF Amp Cooling Processor Controller Phase Limiter Delay Option Crossover Frequency LF-MF Slope LF-MF
40 - 150 Hz 131 dB Omnidirectional 12“ RCF Neodymium 3“ digipro Class D 800 W/RMS Convection Digital + Analog 0, 180 ° RMS, Peak, Thermal No 90, 120 Hz 24 dB/Octave
Input Section Signal Input Input Sensitivity [dBu] Signal Output Power Socket Voltage Range Mechanics Housing Housing Design Color Surface Texture Handles Pole Mount Front Grille Castors Width Height Depth Weight
2x XLR fem, sym. -00 - -3 dBu 2x XLR Link/X-Over, male, sym 1x Powercon In 2x Powercon Out 100 - 240 V Multiplex birch plywood Rectangular Black, white Textured acrylic lacquer 1x on top 2x M20 1.5mm metall grille No 520 mm (20.8 in) 360 mm (14.4 in) 500 mm (20 in) 22 kg (48.5 lbs)
DVX Digital 2-Way Active Speaker
DVX Multifunctional Systems DVX D8 HP DVX D10 HP DVX D12 HP DVX D15 HP
DVX DM Stage Monitors: High-End - Low Profile DVX DM28 DVX DM12 DVX DM15
DVX. Digital 2-Way Active Speaker The DVX series pairs dBTechnologies’ new digipro®G2 power amp technology and state-of-the-art transducers to raise the bar several notches for sound pressure, performance, and response. Boasting an impressive feature set comprising high quality input board, multifunctional birch multiplex housings equipped with rigging points and rails, flexible configuration options, and an unrivalled price-to-performance ratio, DVX systems are discerning professionals’ go-to solutions for a vast range of applications. Alongside the four multifunctional two-way systems, the DVX line also comprises the three DM28, DM12, and DM15 low-profile stage monitors. All models feature high-quality loudspeaker chassis, Innovative, high-performance dBTechnologies digipro®G2 power amps deliver impressive 900W each to drive these advanced speakers. Specially designed, rotatable high-frequency horns provide very clean and constant directivity. All highfrequency horns are made of aluminum to help keep their drivers cool. The integrated DSP carries out various tasks involved in controlling digipro®G2 power amps, serving as an active equalizer, x-over, high-pass filter, as well as performing audio setup tasks, aligning phases and delay time, and controlling the limiter to ensure utmost reliability and operating safety. All DVX Series models come in a professional-grade birch multiplex housing equipped with PowerCon mains connectors and a rugged metal grille backed with laminated acoustic foam rubber. D12 HP and D15 HP models feature high-quality aluminum grips, a pole mount, and a rigging system. DM12 and DM15 monitors are also equipped with a pole mount.
Versatile and robust Professional-grade M10 threaded rigging points and rails
High-quality housings made of multiplex coated with a rugged black textured finish Professional mounting accessories optionally available
High-quality speaker components Rotatable high-frequency horns painstakingly engineered for excellent directivity and made of aluminum to keep drivers cool Direct Drive driver and high-quality tweeter cones made of Mylar or titanium High Power woofer with double-wound voice coils for highest load-handling and minimum power compression
Entire Active System Design EASD™
State-of-the-art digipro®G2 power amp technology for peak power and performance with convection cooling Switched-mode power supplies with PFC for highest efficiency and reliability Integrated controllers enabling fast setup and affording excellent system protection
DVX Digital 2-Way Active Speaker ®
PWM Endstufentechnologie Setting new reference standards for digital high-performance amps, digipro®G2 technology packs a great deal performance into a remarkably light package with a small footprint. These efficient amps do not require fans because they generate little heat. Small and light yet very powerful, they can drive even compact systems to deliver high performance, faithful dynamic response unprecedented in its true-to-nature accuracy, and extremely muscular low end. All DVX Series models feature highly efficient switched-mode power supplies with power factor correction. This PFC ensures the devices get the juice they need to perform at their peak even under challenging conditions, for example, when dealing with low voltage supplies at live events.
Power Densitiy digipro®G2 Class-D power amp technology packs huge performance and operating efficiency into a lightweight solution that leaves a very small footprint. With its remarkable 1:1 power-output-to-weight ratio, this technology brings highest performance capability to compact speaker systems. What’s more, it is also phenomenally easy to handle. digipro®G2 - the high-End Powerpack.
Audiophile performance Power amps need a great deal of headroom to render natural audio events as authentically as possible. It takes a high-voltage power supply to provide this kind of headroom. digipro®G2 delivers exceedingly high performance ranging up to 900W, providing the dynamic range required for faithful, true-to-nature reproduction of every input signal. This power, paired with an ultra fast attack and truly realistic transient response, yields impressive audio performance that rivals that of very elaborate and expensive tube circuits. With a high pulse frequency of 500 KHz, this technology is able to deliver high-definition, high-fidelity audio signals with richly detailed yet natural-sounding top end.
Full Class-D - Maximum Efficiency In contrast to many other so-called “digital” power amps that merely run on a clocked switched-mode power supply, digipro®G2 is a fullfledged Class-Dpoweramp that operates on the principle of pulse width modulation (PWM). This technology is tremendously efficient with more than 90% yield. Componentsremain very cool because so little energy is lost in the form of heat. No fansare necessary. What’s more, components last longer and operate more reliably courtesy of the reduced thermal load.
Maximum Performance digipro®G2 power amps come with highly advanced, ultra efficient switched-mode power supplies (SMPS) with active power factor correction (PFC). They provide all the juice amps need to deliver peak performance even when mains power quality is poor, for example, when low power feeds at live events cause voltages to dip. This makes SMPS far superior to conventional power supplies. • Operates in the range of 95 V to 265 V • Conditions power when line voltages fluctuate
Power and Intelligence digipro®G2 technology synchronizes power stages and control circuits, creating an intelligent, responsive protection and supervision system. An integrated processor controls the ongoing interaction between the audio signal, switched-mode power supply, and PWM output stages, and processes key information. • digipro® G2 monitors impedance and shuts down in case of short-circuit. • Thermal limiters attenuate performance if the unit runs hot. • Peak and RMS limiters protect speakers
DVX Multifunctional Systems Designed with a user-first focus in mind, the DVX Series carries on where the popular DVA Line Array left off. Catering to PA hire and sound reinforcement companies, as well as musicians and everyone else seeking affordable audio equipment that delivers premium performance and excellent return on invest, DVX components are state-of-the-art public address tools for mobile applications and fixed installation. DVX models boast excellent technical specifications and the most advanced technology, paired with remarkable flexibility. DVX rigs may be configured as fullrange systems and as combinations of mid-/high-range units and subwoofers. These cabs can even be used as monitors, side-fills, and delay lines, making them the Swiss Army knife of PA systems. Event service providers are sure to love the flexibility of universal tools that may be rigged up and flown, or set vertically or horizontally. And their remarkable ease of use makes them perfect candidates for dry hire: Even novices can quickly set them up and put them to good use. DVX satisfies all the needs of discerning musicians, bands, and others looking for an excellent mobile or fixed audio system. Featuring top-drawer speaker components, rotatable CD horns, multifunctional enclosures including rigging appointments, and the latest digital power amps with switchedmode power supplies offering PFC, the DVX line is the solution of choice for demanding professionals.
DVX DM Stage Monitors: High-End - Low Profile Professionals expect a great deal from a stage monitoring system. It must deliver very dynamic response, yet remain feedback proof up to very high signal levels, and be inconspicuous so it does not obstruct the audience’s view of the artist. Active DM models were developed specifically to meet these demanding requirements for monitors. The housings’ low-profile design is unobtrusive, fitting in on every stage. The entire speaker system and circuitry have been fine-tuned specifically to deliver premium performance for this application. Three models are available to satisfy different user requirements
equipped with
DVX DVX D8 HP Active 8“/1“, 2-way multifunctional speaker cabinet
The DVX D8 HP is a powerful active 8“/1“ 2-way speaker cabinet designed to render speech and background and other music. Loaded with a high-quality 8“ woofer and a 1“ compression driver with a rotatable CD horn, it is a very articulate with great speech intelligibility and excellent audio properties. Equipped with an integrated digipro®G2 digital power amp, this powered enclosure offers the compact dimensions and light weight that to date have been the domain of high-end passive loudspeakers.
425
The housing’s multifunctional design incorporates a slanted panel for monitoring, rigging points, and even a special monitor setup controlled by the onboard DSP, which also acts as a controller, providing active equalizer, x-over, limiter, and phase and time alignment functions. Combining the DVX D8 HP with a DVA series S08 ore S09 subwoofer creates premium-quality satellite systems.
260
250
45 0
DVX D8 HP Technical data Audio data Frequency response Frequency response Max SPL: Bass/midrange woofer: High frequency driver: Horn: Rotatable:
75 Hz - 20 kHz (-10 dB) 100 Hz - 19 kHz (+-3 dB) 125 dB 8“, 2“ v.c. 1“ driver, 1.7“ titanium v.c. 90° x 70° CD horn Yes
Amp and processor Power supply: Amplifier: Cooling: System presets: Limiter: X-over frequency:
SMPS 400W/RMS - 800W peak Convection, fan-free DSP: flat/processed Peak, RMS, thermal limiters 1800 Hz, 24 dB/octave
Input section Signal input/link: Input sensitivity: Mains:
XLR fem. bal. XLR male bal. 6.3mm jack bal. Max. -3dBu Powercon Input
Hardware Enclosure: Handles: Pole mount: Angles up: Grille: Rigging points: Dimensions (W x H x D): Weight: Optional accessories:
12mm Multiplex coated with textured black lacquer one on top 36 mm 45° for monitoring applications 1mm metal backed with acoustic foam rubber 6 x M8 and 2 x 10mm quick-release 250 x 425 x 260 mm (9.84 x 16.73 x 10.23) 11.5 kg (25.3 lbs) DTF8 mounting yoke, Gig bag
equipped with
DVX D10 HP Active 10“/1“, 2-way multifunctional speaker cabinet
The DVX D10 HP is an active 10“/1“ two-way speaker cabinet perfect for use in music and speech reinforcement applications demanding true frequency response, balanced dynamic response, and assertive sound pressure levels. Equipped with a high-quality 10” woofer and a 1“ compression driver with rotatable CD horn, the DVX D10 HP is fullrange enabled and can be deployed for many applications without an added subwoofer.
510
The housing’s multifunctional design incorporates a slanted panel for monitoring, rigging points, and even a special monitor setup controlled by the onboard DSP, which also acts as a controller, providing active equalizer, x-over, limiter, and phase and time alignment functions. Combining the DVX D10 with a DVA series subwoofer creates remarkably powerful yet compact satellite systems.
310
290 45 0
DVX D10 HP Technical data Audio data Frequency response Frequency response Max SPL: Bass/midrange woofer: High frequency driver: Horn: Rotatable:
70 Hz - 20 kHz (-10 dB) 85 Hz - 19 kHz (+-3 dB) 127 dB 10“, 2.5“ v.c. 1“ compression driver 1.7“ titanium v.c. 90° x 70° CD horn Yes
Amp and processor Power supply: Amplifier: Cooling: System presets: Limiter: X-over frequency:
SMPS 600W/RMS - 1200 W peak Convection, fan-free DSP: flat/processed Peak,RMS, thermal limiters 1600 Hz, 24 dB/octave
Input section Signal input/link: Input sensitivity: Mains:
XLR fem. bal. XLR male bal. 6.3mm jack bal. Max. -3dBu Powercon Input
Hardware Enclosure: Handles: Pole mount: Angles up: Grille: Rigging points: Dimensions Weight: Optional accessories:
12/15mm Multiplex coated with textured black lacquer one on top 36 mm 45° for monitoring applications 1mm metal backed with acoustic foam rubber 6x rails, 6 x M8 and 2x 10mm quick-release (W x H x D): 290 x 510 x 310 mm (11.4 x 20 x 12.2) 14 kg (30.8 lbs) DTF 10 mounting yoke, Gig bag
equipped with
DVX DVX D12 HP Active 12“/1.4“, 2-way multifunctional speaker cabinet
Configured as a classic 12“/1.4“ 2-way system, the DVX D12 HP is a compact, astonishingly light enclosure offering very flexible application options. Its integrated, high-performance digipro®G2 digital power amp delivers exceedingly dynamic response, crisp and tight low end, and tremendous sound pressure. Loaded with high-quality speakers, it provides high-end audio performance with maximum reliability and minimum power compression. A 1.4” driver with a 2” voice coil designed to handle highest loads renders vocals with amazing accuracy across medium-to-longer throw distances. The housing’s multifunctional design incorporates rigging points and a slanted panel serving monitoring purposes.
625
The onboard controller even provides a special monitor setup that specifically adapts the enclosure’s performance for use as a monitor. This DSP also acts as a controller, providing active equalizer, x-over, limiter, and phase and time alignment functions. The DVX D12 HP is the perfect match for the DVA Series subwoofers.
395
370
45 0
DVX D12 HP Technical data Audio data Frequency response Frequency response Max SPL: Bass/midrange woofer: High frequency driver: Horn: Rotatable: Amp and processor Power supply: Amplifier: Cooling: System presets: Limiter: X-over frequency:
55 Hz - 20 kHz (-10 dB) 68 Hz - 19 kHz (+-3 dB) 131 dB 12“, 3“ voice coil 1.4“ compression driver, 2.5“ titanium voice coil 60° x 40° aluminum CD horn Yes
SMPS with PFC 700 W/RMS - 1400 W peak Convection, fan-free FOH, Monitor RMS, thermal limiters 1350 Hz, 24 dB/octave
Input section Signal input/link: Input sensitivity: Mains:
XLR fem. bal. XLR male bal. 6.3mm jack bal. Max. -3dBu PowerCon Input and Link
Hardware Enclosure: Handles: Pole mount: Angles up: Grille: Rigging points: Dimensions (W x H x D): Weight: Optional accessories:
Multiplex coated with textured black lacquer Two aluminium side grips and one on top 36 mm 45° for monitoring applications 1,5mm metal backed with acoustic foam rubber 6x rails, 6 x M10 and 4 x 10mm quick-release 370 x 395 x 625 mm 14.5“ x 15.5“ x 24.6“ 25 kg, (55 lbs) DTF12 Mounting yoke, Gig bag
equipped with
DVX D15 HP
Active 15“/1.4“ two-way multifunctional speaker cabinet A two-way system featuring 15“/1.4“ speakers, the DVX D15 HP is the enclosure of choice for use as a fullrange FOH speaker or a powerful drum monitor. It delivers punchy, assertive bass response without requiring an added subwoofer. Its integrated, high-performance digipro®G2 digital power amp delivers very high sound pressure levels, exceedingly dynamic response, and tight, clean low-end response. Loaded with high quality speakers, it provides premium audio performance with maximum reliability and minimum power compression. A 1.4” driver with a 2,5” voice coil designed to handle highest loads renders vocals with a powerful, assertive punch, easily throwing signals across medium-to-longer distances. The housing’s multifunctional design incorporates rigging points and a slanted panel serving monitoring purposes.
690
The onboard controller even provides a special monitor setup that specifically adapts the enclosure’s performance for use as a monitor. It also serves as a controller for an active equalizer, x-over, limiter, and phase and delay time alignment. The DVX D15 HP is the perfect match for DVA Series subwoofers.
450
430 45 0
DVX D15 HP Technical data Audio data Frequency response Frequency response Max SPL: Bass/midrange woofer: High frequency driver: Horn: Rotatable:
49 Hz - 20 kHz (-10 dB) 57 Hz - 19 kHz (+-3 dB) 132 dB 15“ neodymium 3,5“ voice coil 1.4“ neodymium compression driver, 2.5“ titanium voice coil 60° x 40° aluminum CD horn Yes
Amp and processor Power supply: Amplifier: Cooling: System presets: Limiter: X-over frequency:
SMPS with PFC 700 W/RMS - 1400 W peak Convection, fan-free FOH, Monitor RMS, thermal limiters 1320 Hz, 24 dB/octave
Input section Signal input/link: Input sensitivity: Mains:
XLR fem. bal. XLR male bal. 6.3mm jack bal. Max. -3dBu PowerCon Input and Link
Hardware Enclosure: Handles: Pole mount: Angles up: Grille: Rigging points: Dimensions (W x H x D): Weight: Optional accessories:
Multiplex coated with textured black lacquer Two aluminium side grips and one on top 36 mm 45° for monitoring applications 1,5mm metal backed with acoustic foam rubber 6x rails, 6 x M10 and 4x 10mm quick-release 430 x 690 x 450 mm 16.9“ x 27.2“ x 17.7“ 28 kg, (61.6 lbs) DTF15 Mounting yoke, Gig bag
DVX Zubehör Rigging harnesses for DVX D8, D10, D12 and D15 Quick-release pins attach DTF rigging harnesses to enclosures’ side panels - no further tools necessary and no more hassles tightening and loosening eyebolts. This is a tried-and-true rigging method borrowed from line arrays, used for the first time in the DVX-D series. Hand-wheels at the harnesses sides set the tilt angle, locking them in place to prevent unintentional adjustments. A half-coupler or truss clamp attaches the harness to the truss.
DTF 8/DTF 10 Rigging harnesses
DTF 12/DTF 15 Rigging harnesses
The DTF brackets can be used together with a tilting device for perfect orientation towards the audience.
DTF 8/ DTF 10 Rigging harnesses
TC D8 - TC D15 / TC DM28 - TC DM15 Robust padded gig bags tailored to suit each DVX model are available.
equipped with
DVX DM28 Active 2x8“/ 1“ stage monitor
The DVX DM28 excels at rendering speech and vocals. Users’ search for natural response, dynamic balance, and high SPL in a compact, inconspicuous package ends with this stage monitor. The ultra low-profi le enclosure sports two 8“ neodymium woofers with large 2.5“ voice coils that go about their business of rendering signals with impressive precision. In contrast to cabinets loaded with simple 8” speakers, the DVX DM28 packs a mighty low-midrange punch. What’s more, it responds far faster to transients in the signal, rendering each attack with awesome accuracy and power. Offering far greater dynamic range, it outperforms standard 12“ systems by. A combination of asymmetrical CD horn (90° x 60°(40°)) and precision-matched 1“ RCF® neodymium compression driver effi ciently couples high frequencies. The digipro® digital power amp featuring a PFC switched-mode power supply and the speakers are fine-tuned to minimize the risk of feedback, ensuring the DVX DM28 remains remarkably feedback resistant even at peak SPL.
265
Made of rugged multiplex and coated with tough black lacquer, its light lowprofile enclosure sets up at two different angles. The integrated controller acts as the enclosure’s controller, serving as an active equalizer, active x-over with phase and delay time alignment, and controlling the onboard limiter.
418
480
DVX DM28 Technical data Audio data Frequency response Frequency response Max SPL: Bass/midrange woofer: High frequency driver: Horn: Rotatable:
70 Hz - 20 kHz (-10 dB) 89 Hz - 19 kHz (+-3 dB) 130 dB 2x 8“ neodymium, 2.5“ voice coil 1“ neodymium compression driver, 1.75“ voice coil 90° x 60° (40°) CD horn -
Amp and processor Power supply: Amplifier: HF amp: Bass amp: Cooling: System presets: Limiter: X-over frequency:
SMPS with PFC 750 W/RMS Class-D 250 W/RMS Class-D 500 W/RMS Convection, fan-free Fullrange, Monitor RMS, thermal limiters 1600 Hz, 24 dB/octave
Stereo Input section Signal input: Signal link: Input sensitivity: Mains:
XLR fem. balanced XLR male balanced Max. - 3 dBu PowerCon Input and Linkk
Hardware Enclosure: Handles: Pole mount: Angles up: Grille: Rigging points: Dimensions (W x H x D): Weight: Optional accessories:
Multiplex coated with textured black lacquer Two side grips 30° and 60° 1,5 mm metal backed with acoustic foam rubber 480 x 265 x 418 mm 18.9“ x 10.4“ x 16.4“ 14 kg, 30.8 lbs Gig bag
equipped with
DVX DVX DM12 Active 12“/ 1.4“ stage monitor
The DVX DM12 is an active bi-amped stage monitor. Powerful, assertive, and engineered for professional applications, it is the perfect choice for midsized to large stages. Featuring a discrete, unobtrusive design, the ultra low-profi le enclosure sports a high-performance 12“ neodymium woofer paired with a 1.4“ neodymium compression driver and rotatable aluminum CD horn precision matched for on-stage monitoring. Unlike conventional multifunctional speakers, the DVX DM 12 is a prograde performer developed specifically for use as a floor monitor. Optimized to resist feedback even at extremely high levels, it delivers the true-to-nature response and dynamic balance that today’s artists demand. The integrated digipro® digital power amps deliver the requisite output. The switched-mode power supplies with PFC ensure touring rigs get all the juice they need to perform at their peak even when a venue’s mains power is weak and voltage is low.
305
The onboard controller encompasses an active equalizer, active x-over including phase and time alignment, limiters, and switchable system presets that adapt the monitor’s performance to suit the given application. Made of rugged multiplex and coated with tough black lacquer, the cabinet sets up at two different angles. It is also equipped with a pole mount, enabling the DVX DM12 to be set on a tripod or speaker pole.
378
DVX DM12 Technical data Audio data Frequency response Frequency response Max SPL: Bass/midrange woofer: High frequency driver: Horn: Rotatable:
55 Hz - 20 kHz (-10 dB) 68 Hz - 19 kHz (+-3 dB) 131 dB 12“ neodymium, 3“ voice coil 1.4“ RCF neodymium compression driver, 2.5“titanium voice coil 40° x 90° aluminum CD horn Yes
Amp and processor Power Supply: Amplifier: HF amp: Bass amp: Cooling: System presets: Limiter: X-over frequency:
SMPS with PFC 750 W/RMS Class-D 250 W/RMS Class-D 500 W/RMS Convection, fan-free FOH, Monitor RMS, thermal limiters 1400 Hz, 24 dB/octave
Input section Signal input: Signal link: Input sensitivity: Mains:
XLR fem. balanced XLR male balanced Max. -3dBu PowerCon Input and Link
Hardware Enclosure: Handles: Pole mount: Angles up: Grille: Rigging points: Dimensions (W x H x D): Weight: Optional accessories:
Multiplex coated with textured black lacquer Two side grips 36 mm 35° x 55° 1,5 mm metal backed with acoustic foam rubber 6 x M8 660 x 305 x 378 mm 25.9“ x 12“ x 14.9“ 17.5 kg, 38.5 lbs Gig bag
660
equipped with
DVX DM15 Active 15“/ 1.4“ stage monitor
The DVX DM15 is a low-profi le stage monitor. Unobtrusive yet very muscular, it is designed for sound reinforcement applications that require powerful low-end performance without added subwoofers. It sports a high-performance 15“ neodymium woofer and a 1.4“ neodymium compression driver, coupled to an aluminum“ CD horn. This combination’s response across the human voice’s full range is impressively assertive. Paired with high-output digipro® digital power amps in a bi-amped confi guration, the DVX DM15 belies its unobtrusive look with performance that is far from understated, delivering plenty of power to cover midsized to large stages.
338
An onboard controller manages the entire system, serving as an active equalizer, active x-over with phase and time alignment, and limiter. The DSP also offers switchable system presets that adapt the monitor’s performance to suit the given application. Made of rugged multiplex and coated with tough black lacquer, the cabinet sets up at two different angles. It is also equipped with a pole mount, enabling the DVX DM15 to be set on a tripod or speaker pole.
442
734
DVX DM15 Technical data Audio data Frequency response Frequency response Max SPL: Bass/midrange woofer: High frequency driver: Horn: Rotatable:
50 Hz - 20 kHz (-10 dB) 59 Hz - 19 kHz (+-3 dB) 132 dB 15“ neodymium 3.5“ voice coil 1.4“ RCF neodymium compression driver, 2,5“ titanium voice coil 40° x 60° aluminum CD horn Yes
Amp and processor Power Supply: Amplifier: HF amp: Bass amp: Cooling: System presets: Limiter: X-over frequency:
SMPS with PFC 750 W/RMS Class-D 250 W/RMS Class-D 500 W/RMS Convection, fan-free FOH, Monitor RMS, thermal limiters 1350 Hz, 24 dB/octave
Stereo Input section Signal input: Signal link: Input sensitivity: Mains:
XLR fem. balanced XLR male balanced Max. -3dBu PowerCon Input and Link
Hardware Enclosure: lacquer Handles: Pole mount: Angles up: Grille: Rigging points: Dimensions (W x H x D): Weight: Optional accessories:
Multiplex coated with textured black Two side grips 36 mm 35° x 55° Metal backed with acoustic foam rubber 6 x M8 734 x 338 x 442 mm 28.9“ x 13.3“ x 17.4“ 21 kg, 46.2 lbs. Gig bag
DWS800 The digital UHF broadband wireless system To learn more, see the DWS 800 flyer or visit www.dbtechnologies.com
100% future-proof Offering an ultra wide tuning spectrum ranging from 470 to 870 MHz, the DWS 800 is truly future-proof. It is sure to continue providing reliable service even in the face of the rapidly shrinking range of frequency bands available for wireless microphone systems. Its digital transmission technology allows more frequencies to be assigned in an ever more crowded spectrum. And DWS 800‘s unrivalled 400 MHz tuning range affords you much greater freedom of choice.
Ultra wide tuning range for utmost flexibility You have 16,000 tunable frequencies between 470 and 870 MHz to choose from. All DWS800 systems can transmit across a very high channel count in compliance with local regulations almost anywhere in the world. If the full frequency range is available, you can use up to 200 channels in parallel.
Digital audio quality dBTechnologies pioneered digital wireless technology, unveiling the 2.4 GHz DWS2400 system in 2003. Digital systems outperform their analog forebears by ensuring more stable transmissions, less interference and, most importantly, peerless audio quality. These tap-proof radio transmissions arrive without signal loss, compression, or perceptible noise.
The full feature set and all the accessories You may need just one DWS800 or a sophisticated system made up of many such units. Either way, you get the full set of features including variable transmission power (10 or 50 mW/ERP), DSP frequency scanning, and fully automated frequency setup. The optional software for your PC controls complex wireless systems and offers a spectrum analyzer and intermodulation calculator. All this adds up to secure and easy operation and management, even in adverse conditions. You can preselect the given country‘s frequency banks for the automated setup routines. Rack-mount hardware, the active AS6W broadband antenna splitter, and special wideband directional antennas are also available.
• True digital UHF modulation compliant with European and US regulations • World’s first wireless system with a 400-MHz tuning range (470 to 870 MHz) • 16,000 tunable frequencies and up to 200 simultaneously operable systems • Special digital wideband antennas • Remarkably resistant to interference • Variable 50/10 mW transmission power • Continuous transmission of telemetry data • USB port for remote control PC software; Ethernet HUB interface • IR interface for aligning transmitters and receivers • Encrypted audio transmission • Powerful 44.1-KHz, 24-bit DSP • Uncompressed 30-18000 Hz audio signal transmission • Quick frequency scan function on board • Advanced frequency scan via remote software
DWS800 R Receiver The heart of the DWS800 is the DWS800R digital true-diversity receiver. It features two full-fledged receiver units for maximum reliability, and offers 16,000 tunable frequencies for utmost flexibility. Remarkably resistant to interference, the DWS800R can handle up to 200 systems simultaneously. And for added convenience, it can be controlled at a PC using the integrated Ethernet and USB interfaces.
DWM 800 Handheld Transmitter The DWS800 series handheld transmitter comes in a durable aluminum chassis and is optionally available with a dynamic or condenser capsule. The onboard OLED graphic display provides information on all key operating parameters such as the transmitter‘s name, frequency, capsule sensitivity, transmission power, and battery status.
DWS 800 Pocket Transmitter The pocket transmitter comes in a compact aluminum housing with an integrated OLED graphic display that provides information on all key operating parameters such as the transmitter‘s name, frequency, transmission power, and battery status. A mini XLR input providing phantom power serves to connect optionally available headsets, lapel microphones, and guitar cord adapters.
HUB 800
DWS 800 Remote-Software
The DWS 800 HUB networks up to six DWS 800 systems. Used in conjunction with PC management software, it enables remote surveillance. It may be cascaded to manage up to 144 DWS 800 systems. An Ethernet port provides a wireless link, and a USB port is available to cover shorter distances.
The DWS800 management software lets you edit and monitor all parameters, conveniently and quickly using a Windows PC. Managing anything from a small setup via USB to complex multi-channel systems via the HUB 800 is easy. This software application also offers advanced frequency scanning with detailed spectrum analyses. And you can plan and configure multichannel systems in off-line mode even without connected devices.
• Remote surveillance of up to six DWS 800 systems using one HUB • Cascadable to enable remote surveillance of up to 144 DWS 800 systems • Extensible with a WLAN router for wireless links • Front-panel graphic display and menu navigation for easy, fast access S • D card reader on the front panel • Infrared interface for synchronizing transmitters • Firmware update via USB port • 19“ rack format, 1HU in size
• Extensive scanning functions with a spectrum analyzer • Storable user presets • Tools to manage varying system configurations • Variable transmission power • Name allocation • Audio data encryption • Receiver power tracking and analysis for every channel • Adjustable capsule sensitivity • Visual indication of battery status and remaining life
DWS 800 Rack Digital audio signaling systems are far less susceptible to interference and intermodulation distortion than conventional wireless systems. This makes the DWS800 system the ideal solution for an ever more crowded and narrowing frequency range. It is perfect for configuring sophisticated wireless systems with numerous radio links. As many as six DWS800R receivers may be connected to one AS6W antenna splitter. Up to three AS6W may be cascaded so that one antenna pair can serve up to 16 DWS800 systems.
DWS800 R Technical data • 400 MHz tuning range • True diversity • Infrared and radio frequency telemetry transmission • 16.000 frequencies capability • Menu operation on front panel • USB connection for PC interface and firmware updates • Real time transmission of battery status • 9.5” Rack mount
Demodulation type Frequency range Sensitivity Diversity type Audio sampling
digital 470 - 870 Mhz –93 dBm True Diversity, Dual Demodulator 24 Bit, 44,1 kHz
Frequency response SNR System latency Signal output Output level Interfaces Antenna connection Voltage range Dimensions
30—18.000 Hz +/- 3 dB 106 dB 3 ms Analog: XLR, bal. 6,3 mm jack, unbal. Digital: S/PDIF optical Line/Mic Level switchable XLR: 600 Ohm, Line 3V rms, Mic 30 mV rms Jack: 600 Ohm, Line 1,5 V rms , Mic 15 mV rms USB connector RJ11 - RS485 for DWS 800 Hub BNC detachable 90 - 240 Vac 50-60 Hz 9.5“ rack mount
Your dealer
A.E.B. Industriale Srl. VIA BRODOLINI, 8 40056 CRESPELLANO (BO) ITALY Tel.: + 39 051969870 Fax: + 39 051969725 www.dbtechnologies.com e-mail: info@dbtechnologies.com
All specifications to change without notice, error omitted. Rev. 03/2012.
Rental & Installation