Breeding Innovation Through Application
LED Lighting Solutions Provider
www.regnant.co.in
Our Range Of LED Light Sources and Drivers
2
LED QAQC Test and Measurement Solutions
3
LED Strip Lights and Backlighting Modules
4
LED Spot Lights
5
1-5W Candle Bulbs, Globe Lamps and T8 Retrofit Tubelights
6
LED Color Changing Tubes and Underwater Lights
7
LED Wall Washers and Flood Lights
8
High Power LED Street Wind/Solar Hybrid System
9
LED Court Light, Indirect Mall Pathway Lights and Slim High Power Projection Light
10
High Power Adjustable Beam Recessed Ceiling Light, UG Poolside Light and LED Point Light Source
11
High Power Advertising Billboard Light, Tunnel Lamp and LED Pixel Light
12
Our Range of LED Light Sources We can offer a wide variety of high quality discrete, smd, chip, led arrays and high power led’s from leading manufacturers with guaranteed measureable consistent parameters from batch to batch as per established international standards.
Super Flux(Piranha) LEDs
Types of LED Drivers In order to draw maximum mileage from long lifetime LEDs, we offer equally long lifetime matching drivers using prescreened high quality electronic components which can outlast the useful lifetime of LEDs for the lowest real cost of ownership LED solutions which are available in a wide variety of needs matching to your requirements as per following broad categories: 1. Constant Voltage Drivers. 2. Constant Current LED Drivers. 3. PFC High Efficiency LED Drivers. 4. Dimmable Constant Current LED Drivers. 5. IP66 Class Underground & Underwater Drivers
2
Discrete LEDs
Star LEDs
SMD Top Flux LEDs
SMD High Power LEDs
LED Measurement Solutions Complete LED test equipment for chip led arrays and high power, high intensity LED which can accurately measure spectral and photometric characteristics in exact conformance with CIE requirements. The measurable items include : relative spectral power distribution, x-y colour chromaticity co-ordinates, correlated colour temperature, standard deviation in colour measurement, colour rendering index, radiant power, peak wavelength, spectral half width, dominant wavelength, colour purity, luminous flux, forward voltage, forward current, reverse breakdown voltage, reverse leakage current etc. which meets all electric and spectral requirements of LEDs.
Test Setup For LED Chips A low cost solution for accurate measurement of electrical and optical characteristics of chip LEDs. It can measure forward current, forward voltage, reverse current and voltage, relative spectral power distribution, x-y colour chromaticity co-ordinates, radiant power, correlated colour temperature, CRI, SDCM, peak wavelength, dominant wavelength, colour ratio, purity etc. as per CIE norms.
LED Phosphor Test Disposition Setup This Setup is useful for LED manufacturers who want to check the quality of LED fluorescent powder for power distribution , x-y colour chromaticity co-ordinates, correlated colour temperature, colour difference, colour rendering index, peak wavelength, long wavelength, colour purity, the relative brightness etc. as per CIE requirements. The stytem incorporates blue exciting source while successfully eliminating the spectral disturbance of blue lights and getting the spectrum of phosphor perfectly complete.
3
LED 3528 rigid strip This rigid strip light is made of FR4 grade PCB using type 3528 SMD LED with color option of R,G,B,Y,W or WW. Power source is constant current 12V DC. Available in 2 models of 30 or 60 pcs. per metre.
LED 3528 flexible strip This very flexible strip can be glued to any surface as it is made using high quality FPC board and 3528 SMD LED. Available color choices are R,G,B,Y,W or WW with either 30 or 60 pcs. per metre. Requiring a constant current 12V DC driver, it comes in a 5 metres roll.
LED 5050 rigid strip This rigid strip light is made of FRY grade PCB using type 5050 SMD LED with color choice of RGB, Warm white or Pure white. Available options are 30 or 60 pcs. per metre. and requires 12V DC constant current source.
LED 5050 flexible strip Using 5050 type SMD LED assembled on a very flexible FPC board, it can be easily bent. Available in RGB, WW or White color Temperature. It uses 30 pcs. LEDs per metre and requires a 12V DC constant current driver. One roll is 5 metres long.
5010 LED module Size: 50mm X 10mm X 4mm. Power Requirement: 12V DC, 0.24W/pc. Color: R,G,B,Y,W or WW. This module is made on FR4 PCB with 3528 type SMD LEDs and has a viewing angle of 120 degrees. It is recommended for indoor applications.
Waterproof LED5218 module Size: 52mmX18mmX5mm. Power Requirement: 12V DC, 0.72W/pc. Color: R,G,B,Y,W or WW optional. Construction: High quality 3528 SMD LED assembled on aluminum base with IP68 class waterproofing. Applications: This channel board’s potential is limited only by your imagination. It saves 90% of energy compared to conventional systems with reliability and long lifetime which only LEDs provide. Make sure that your brand or logo will continue to light year after year. The tough construction of LEDs make them easy to work with in any facet; acrylic letters, logos or signage.
4
MR16 – 36pcs. LED Spot Lights These lamps in 15 degrees beam angle are an economical substitute for display lighting applications where previously designers have been using standard 12V/35W MR16 Dichroic lamp. GU 5.3 bipin is suitable for 12 V AC/ DC applications using only 2 W of power. For direct 240V applications with 1.8W power there is a choice of GU10 base, standard E27 or slim E14 screw base. Available color temperature: Pure White : 6000K Warm White : 3200K
MR16 & GU10 Base 3 X 1w LED Spot Lights With brightness matching 40W incandescent spot lamps, MR16 bi-pin lamps work on AC/DC 12V while GU10 base lamp works on AC 85-260V. These lamps are available in 15,30 & 45 degrees beam angles with a choice of “Pure white” & “Warm white” color temperature.
PAR 30 & PAR 38 LED Spot Lights Our E27 screw based 7 X 1W PAR30 LED spot lamps can deliver upto 85lm/W with a comparable performance to 60W Halogen PAR lamp resulting in substantial energy savings. Similarly our 7X2W PAR38 LED spot lamp in 60 degrees beam angle can compare to a 75W conventional Halogen PAR.
5
1.5W LED Candle Bulb Our low power standard E27 and slim E14 screw base lamps use only 1.5W of power, work on 240V AC and are fully dimmable making them an ideal choice for chandeliers using multiple lamps with a choice of pure white or warm white color temperatures.
1W and 5W Globe Lamps Our globe type LED lamps drawing only 1W with a working voltage range of 85-260V AC, are ideal to use as night lamps and in those areas where light is required for safety. 5W model is ideal for general area soft lighting such as restaurants, bars, conference rooms, passages etc. Both of these models are available in standard E27 screw base whereas 1W model is also available in slim E14 screw base. Available colors: R,G,B,Y,W or Warm white.
T8- LED Tubelights Regnant offers energy saving substitutes for conventional 600 & 1200mm. linear fluorescent tubelights. These can be directly fitted into conventional tubelight fixtures designed for 26mm.Ń„ tubes requiring no external control gear as they have inbuilt drivers whose components are designed to last upto 50000 hours.
Part No.
Color Temp.
Total Power
Luminous Flux
Length
T8P-588-01
Pure white
9W/240V
750Lm.
588mm.
T8P-588-02
Warm white
9W/240V
650Lm.
588mm.
T8P-1198-01
Pure white
19W/240V
1500Lm.
1198mm.
T8P-1198-02
Warm white
19W/240V
1300 Lm.
1198mm.
6
LED Color Changing Tube These color changing LED tubes are available in 1m. length and the color can be changed by in built programmer or can be externally programmed with a computer for synchronization of several tubes. These can also work on DMX protocol and several tubes can be connected together for highlighting building outlines, facades and bridge outlines. The base is anodized aluminum with UV stabilized PC tube cover and it is using super bright leds. It is IP65 class water & dust proof fixture with a choice of DC 24V or 240 V AC and is suitable for outdoor applications.
High Power LED Underwater Lights This IP68 class fixture working on 12V is absolutely safe for underwater fountains, waterfalls and swimming pools. With RGB 10W multicolor LEDs and made of anticorrosive aluminum body, it is an excellent choice for illuminating water bodies. LEDs have lifetime ≼ 50000 hours.
7
LED Wall Washers Regnant slim W(70mm.) & H (112mm.) wall washers with length depending upon wattage are IP65 class outdoor fixtures with a projection distance of 10-15 metres and beam angle 30 degrees. Fabricated using glass and aluminum alloy they are available in a 9,12,18,24 & 36w with DMX control ability. Color options are standard RGB, AWB and white light.
48w LED Flood Light LED flood light uses high power LEDs as light source and it can achieve 256 grayscale changes with in-built controls. It is offered as R,G,B or A,W,B in 3 color changing or single color warm white or pure white. Several fixtures can be controlled with DMX and being IP65, it can be used for outdoor faรงade, landscape, billboards lighting etc. It has a beam angle of 130 degrees X 60 degrees or can be supplied with 60 degrees round lens. Total energy consumption including that of driver is around 56W working on 240V AC.
8
High Power LED Street Light Ergonomically designed IP65 class high power LED based street lights with batwing optical characteristics are capable of working from -20-55 degrees Celcius ambient temperature. In built drivers are HPF with Cosф 0.98. These fixtures having CRI>80 give light output of 80 lumens per watt with a choice of 50, 75 or 100 W. Available color temperatures are 3000/4000/5500 degrees K.
Wind and Solar Hybrid System Working Principle A solar/wind hybrid system for street light is a stand alone system using an appropriate energy efficient lighting fixture which works on the energy stored in rechargeable SMF VRLA batteries. Using an intelligent solar charge controller, these batteries are either charged through solar panel or small wind turbine without the need for digging where conventional power ducts are used. Once installed there is no electricity or maintenance required as LEDs use very little power. The only maintenance required is to keep solar panels free of dust, soot and bird droppings. We have complete capability to install such systems.
9
High Power LED Court Light Our European style courtyard lighting fixtures are a designer’s dream as they are IP65 class made of rust resistant materials using constant current drivers working on AC 85-265V with a choice of five wattages and two color temperatures. You can use them in gardens, courtyards, mall pathways etc. Type No.
W
Lux Level Pure white
Lux Level Warm white
RTCL20
20
45(H=4M)
38.6(H=4M)
RTCL30
30
46.5(H=4M)
39(H=4M)
RTCL40
40
47.5(H=4M)
39.8(H=4M)
RTCL50
50
51.4(H=4M)
44.5(H=4M)
33.4(H=4M)
30.9(H=4M)
35.6(H=4M)
32.5(H=4M)
RTCL60
60
Indirect Mall Pathway Lights Regnant has designed a very unique state of art high power LED indirect lighting fixture which cuts down on light pollution to generate soft indirect lighting in mall pathways and is also suitable for pedestrian walkways with a pole height that can be variable from 4-6m. These fixtures are made of aluminium and deliver 80lm/W with a PF of 0.98 and a working temperature range of -20-55 degrees Celsius. Color Temperatures: 3000/4000/5500K Available Wattages: 30/50/75W High power LED chip arrays are from “BRIDGELUX”.
Slim High Power Projection Light Regnant’s unique design capabilities reflect in this IP65 class fixture with 120 degrees beam achieved in a fixture size of ф150mm. X L 250mm. cylindrical shape with U type bracket for easy mounting. It is designed in a manner to highlight only the desired lighting effect from the luminaire instead of the luminaire itself. It can be used for creating creating streaks of light to highlight architectural features on buildings and bridges. Color Temperature: R, G, B, Y, W or Warm White. Power Options: 10, 15, 20, 30 & 40W (AC 85-265V) This fixture is also available with full color RGB using inbuilt controller or external DMX control for synchronization with other fixtures.
10
High Power Adjustable Beam Recessed Ceiling Light Requiring a hole of only 70mm and provided with an industry’s first adjustable beam angle from 0-180 degrees. our fixture with a choice of 5 and 6 watts with color temperatures 4000 as well as 6000K, you can achieve variable luminance at various heights depending upon your requirements. Model No.
Power (W)
Lux 6000K
Lux 4000K
RT-ABCL5
5
21(H=2M)
19.5(H=2M)
RT-ABCL6
6
23(H=2.5M)
21.6(H=2.5M)
Underground Poolside Light This product with overall depth of only 53mm. and hole Ń„35mm. is ideal for poolside or underground installation along water bodies as it is made from rust resistant materials conforming to IP68. Available with a choice of 1 or 3W it can be ordered in any color temperature including in built controller with RGB color changing for dramatic effects.
LED Point Light Source The use of these color changing miniature LED point sources working in 12V is limited by your own imagination. Such light sources have been used on hotel facades, night clubs, bars, restaurants, mall interiors, bridges etc. They are using RGB LEDs of 1 or 3W with alnico shell and glass lens which is not obtrusive even in day light. It can be fixed very easily to any surface.
11
High power wide angle advertising Bill board spot light Regnant’s solution for low power reliable lighting applications for advertising companies’ managing billboard lighting. This IP65 class fixture in die-cast aluminium and toughened glass cover of 5mm. thickness can operate from 86-265 VAC producing a uniform light beam of 120 degrees with constant current drive. It is available in 70, 80 & 90 watts in pure white and warm white color temperature achieving CRI > 80 giving uniform lighting under Indian power conditions. Designed for operating temperature of -30-50 degrees and humidity of 10%-95% it can withstand harsh Indian climatic conditions. Specification Dimensions: 398mm. X 285mm. X 112mm. Model No.
Power(W)
Luminous Flux
RTBL 70
70
≥ 5600 Lm.
RTBL 80
80
≥ 6400 Lm.
RTBL 90
90
≥ 7200 Lm.
High power LED Tunnel Lamp This IP65 class fixture is ideal for railway, metro and mountain tunnels. Lifespan of LED is 50,000 hours and available color temperatures are 4000 & 6500 K with CRI > 80. For beam spread pls. see below attached drawings & specifications. Overall dimensions : 300mm. (L) X 150mm. (W) X 57mm. (H) Model No. Power(W) Luminous Flux Operating Voltage : 86-265 VAC with constant current driver. RTTL 30 30 ≥ 2400 Lm. Operating Temperature : -30-50 degree Celcius RTTL 40 40 ≥ 3200 Lm. Operating Humidity : 10% - 95% RTTL 60 60 ≥ 4800 Lm. RTTL 70
70
≥ 5600 Lm.
RTTL 80
80
≥ 6400 Lm.
LED Pixel Light Very nice and easy to fix IP65 LES pixel lights pade from UV stabilized PC with Ф105 and height 65mm, these can be easily fixed on to any surface for dramatic effects as shown on picture below. They are made in different wattages with RGB in built controller or DMX controller for showing water flow effect and can create animation using computer controlled graphics which can give up to 16.7M colors. Operating voltage can be 12/24V DC or 240V AC. Contact our sales department for more information.
12
Our Other Products • • • • • •
Retrofit & Non Retrofit CFLs Triband T4 & T5 Linear Fluorescent Tubelights MH Lamps & Ballasts Electronics Ballasts Building Automation Sensors Electrodeless EM Induction lamps
• • • • •
Energy Saving luminaires & table lamps Emergency Lighting Systems Solar & Renewable Energy Based Systems Rechargeable SMF VRLA & Ni-Mh batteries Lithium Ion polymer & other batteries
Address: B-167, Freedom Fighters’ Enclave, New Delhi - 110068, INDIA Phone: +91 11 29535381/82/83/84, 9555977207/08/09 Cell: +91 9717902902/903903/ 904904 Fax: +91 11 29534272 E-mail: led@regnant.co.in, batteryinfo@regnant.co.in Web: www.regnant.co.in