Cat 986h wheel loader specifications by Renderlive

986H

Wheel Loader

Engine Engine Model Gross Power – SAE J1995 Net Power – ISO 9249 Buckets Bucket Capacities

Cat® C15 ACERT™ 335 kW 449 hp 305 kW 409 hp 5.3-7.6 m3

7-10 yd3

Operating Specifications Rated Payload – Standard (Quarry Face) Rated Payload – Standard (Loose Material) Operating Weight – Standard Rated Payload – High Lift (Quarry Face) Rated Payload – High Lift (Loose Material) Operating Weight – High Lift

10 tonnes 12 tonnes 42 225 kg 9.5 tonnes 10 tonnes 42 943 kg

11 tons 13 tons 93,090 lb 10.5 tons 11 tons 94,677 lb

Lower your cost per ton with built-in durability.

Contents Structures.............................................................4 Power Train ..........................................................6 Hydraulics ............................................................8 Operator Station ................................................10 Technology Solutions .......................................12 Safety ..................................................................13 Serviceability .....................................................14 Customer Support .............................................14 Sustainability .....................................................15 System Match Efficiency .................................16 Bucket Ground Engaging Tools ......................17 Specifications ....................................................18 Standard Equipment .........................................26 Optional Equipment...........................................27 Mandatory Attachments ..................................27 2

Cat Large Wheel Loaders are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplified serviceability, our machines allow you to move more material efficiently and safely at a lower cost per ton. The new 986H builds upon this legacy of durability, performance, safety, operator comfort, serviceability and sustainability. 3

Structures Best built for the toughest conditions.

Lift Arms Your key to maximum uptime and productivity is our field-proven lift arms. • Excellent visibility to the bucket edges and work area through a Z-bar design. • High load stresses are absorbed by the solid steel lift arms. • Enhance strength in key pin areas through the use of one piece castings.

Robust Structures Your bottom line is improved by highly durable structures that achieve multiple life cycles and withstand the toughest loading conditions. • Full box-section rear frame resists torsional shock and twisting forces. • Heavy-duty steering cylinder mounts efficiently transmit loads into the frame. • Cast axle pivot mounting areas better disperse stress loads for increased structural integrity.

Front Linkage To ensure long life and reliability, the linkage pin joints feature a greased pin design with optional auto lube system.

Cat Planetary Powershift Transmission Building your success begins with a best-in-class transmission designed specifically for mining applications. • Consistent, smooth shifting and efficiency through integrated electronic controls. • Heat treated gears and shafts extend component life and maximize reliability. • Four forward and three reverse speeds to match your application.

Cat C15 Acert Engine Durability and efficiency at the heart of your 986H comes from the Cat C15 Acert engine. Optimum performance is built in to this 6 cylinder turbocharged engine. • Mechanically Actuated Electronic Unit Injection (MEUI™) controls injection pressure over the entire engine operating range. This gives the C15 complete control over injection timing, duration and pressure. • Extended engine life through Cat components with proven reliability. • The Advanced Diesel Engine Management (ADEM™) A4 electronic control module manages fuel delivery to optimize performance and provide quick engine response.

Power Train Move material more efficiently with improved power and control.

Transmission Neutralizer Pedal • Extends service brake life by neutralizing transmission as service brakes are applied. • Allows full power to implement system while the machine is stationary during truck loading. 2 Set Point for Neutralization – Start of service brake pressure modulation 3 Full Pedal Travel – Maximum brake pressure

Hydraulics Productivity enabling you to move more and make more.

Load Sense Hydraulics Increase efficiency through our Load Sense Hydraulic System. Load sense hydraulics maximize performance by directing hydraulic fluid flow through implement and steering system only when needed. • Lowered fuel consumption. • Consistent performance and efficiency with lower system heat.

Simple, Intuitive Operator Interface Operators will be productive right away with our easy-to-use operator interface. • Comfortable soft detent implement controls. • Low effort, responsive steering wheel. • Easy-to-use, in-cab programmable lift kickout allows the operator to pre set linkage positions and achieve faster cycle times.

3rd Valve Hydraulic Control • Provides versatility through the ability to control a specialized attachment.

Filtration System Benefit from extended performance and reliability of your hydraulic system with our advanced filtration system. • Implement pump case drain filters. • Implement system filter. • Steering pump case drain filters. • Power train oil filter.

Your operators can work more efficiently and stay comfortable with our customer-inspired cab features.

Entry and Exit Enter and exit the cab easily and safely with these newly designed, ergonomic features. • Punch stamped tread plates provide excellent footing. • Spacious cab provides ample space for comfortable entry and exit. • Angled access ladder.

Cat Comfort Series III Seat Enhance comfort and reduce operator fatigue with Cat Comfort Series III seat. • High back design and extra thick, contoured cushions. • Air suspension system. • Easy-to-reach seat levers and controls for six way adjustments. • Seat-mounted implement pod that moves with the seat. • Optional heated seat for cold weather applications.

Operator Station Best-in-Class operator comfort and ergonomics.

Environment Your operator’s productivity is enhanced with our clean, comfortable cab environment. • Maintain desired cab temperature with automatic temperature controls. • Pressurized cab with filtered air.

Technology Solutions Greater productivity through Integrated Electronic Systems.

Optional Rear View Camera Cat Work Area Vision System (WAVS) enhances visibility around the job site through the use of a rear view camera. A camera mounted at the rear of the machine provides the input to the monitor display mounted in the front right corner of the cab, within the operators field of vision.

Cat Monitoring System This includes a digital readout for gear selection and ground speed as well as gauge displays for: • Fuel tank level. • Engine and steering oil pressures. • Engine coolant temperature. • Torque converter and hydraulic oil temperature. • Engine inlet air temperature.

Safety Making your safety our priority.

We are constantly improving our products in an effort to provide a safe work environment for the operator and those who work on your job site.

Machine Access • Walkways with non-skid surfaces are designed into the service areas. • Windshield cleaning platforms provide safe and convenient access for the operator. • Maintain three points of contact at all times through ground level or platform accessible service areas. • Angled access ladder and strategically placed grab handles provide safe access and egress for the operator.

Operator Environment • Low interior sound levels. • Cab mounted LED warning beacon. • Optional heated seat. • Optional HID lights provide excellent workspace visibility. • Full Roll Over Protection System (ROPS) integrated into cab design.

Serviceability Enabling high uptime by reducing your service time.

We can help you succeed by ensuring your 986H has design features to reduce your downtime. • Longer service intervals on fluids and filters. • Safe and convenient service with ground level or platform access and grouped service points. • Centralized, ground level grease points for injecting grease into linkage pin joints. • Centralized remote pressure taps for power train components. • Ground electrical service center with emergency engine shutdown switch, battery disconnect switch and circuit breakers.

Customer Support Your Cat dealers know how to keep your mining machines productive.

Legendary Cat Dealer Support A valued partner, your Cat dealer is available whenever you need them. • Preventive maintenance programs and guaranteed maintenance contracts. • Best-in-class parts availability. • Improve your efficiency with operator training. • Genuine Cat Remanufactured parts.

Sustainability Stewards of the environment.

Protecting the Environment Environmental responsibility is designed and built into our 986H’s features. • Engine Idle Shutdown can help you save fuel by avoiding unnecessary idling. • Reduce waste to the environment with our maintenance free or extended maintenance batteries. • To assist with maximizing machine life, Caterpillar provides a number of sustainable options such as our Reman and Certified Rebuild programs. In these programs, reused or remanufactured components can deliver cost savings of 40 to 70 percent, which lowers operating cost while benefiting the environment. • Caterpillar offers retrofit packages to bring new features to older machines, maximizing your resource. And, when you go through the Cat Certified Rebuild program, these retrofit kits are part of the rebuild process.

System Match Efficiency Efficient loading/hauling system starts with a perfect match.

Standard Lift High Lift

735B 3

740B 4

770G 4

772G

773E/773G

Efficient Combination For full truck payloads with minimum loading time, an efficient loading/hauling system starts with a perfect match. Cat wheel loaders are matched with Cat articulated and off-highway trucks to maximize volume of material moved at the lowest operating cost per ton. The 986H equipped with the standard linkage is a perfect four pass match for the 770G (38.6 tonnes/42.6 tons). The 986H equipped with a high lift linkage is capable ofÂ loading a 772G (47.7 tonnes/52 tons) in 5 passes and a 773E or 773G (56 tonnes/61.7 tons) in 6 passes.

Bucket Ground Engaging Tools Protect your investment.

Performance Series Buckets Performance Series Buckets feature an optimized profile maximizing material retention and minimizing dig time, translating into significant productivity and fuel efficiency improvements. All 986H buckets are manufactured with the Performance Series design.

Rock Bucket Applications: Face loading tightly compacted pit materials.

General Purpose Bucket Applications: Loading loose, stockpiled material.

Quick Coupler The optional quick coupler allows the operator to quickly switch between multiple work tools, making the 986H highly versatile.

GET Options Multiple GET options are available to customize your 986H to your application, such as: • Sidebar protectors. • General duty and penetration tips. • Standard and half arrow segments.

Enhance the productivity of your loader and protect your investment in buckets with our Ground Engaging Tools (GET). Your knowledgeable Cat dealer will work with you to understand your application and needs for the GET that is best for you. For a full list of Cat GET please visit http://www.cat.com/get.

986H Wheel Loader Specifications Engine Engine Model Emissions Rated Speed SAE J1995 at Rated Speed ISO 14396 at Rated Speed EEC 80/1269 ISO 9249 at Rated Speed (assumes standard ambient fan) SAE 1349 at Rated Speed (assumes standard ambient fan) Bore Stroke Displacement Peak Torque @ 1,200 rpm Torque Rise

Transmission Cat C15 ACERT Tier 2, Tier 3 equivalent 1,800 rpm 335 kW 449 hp 329 kW 441 hp 305 kW 409 hp 305 kW 409 hp 305 kW

409 hp

137 mm 171.5 mm 15.2 L 2320 N•m 37%

5.4 in 6.75 in 927 in3 1,711 lb ft

42 225 kg 10 tonnes

93,090 lb 11 tons

12 tonnes

13 tons

9.5 tonnes

10.5 tons

10 tonnes

11 tons

5.3-7.6 m3 770 772

7-10 yd3

Operating Specifications Operating Weight Rated Payload – Standard (Quarry Face) Rated Payload – Standard (Loose Material) Rated Payload – High Lift (Quarry Face) Rated Payload – High Lift (Loose Material) Bucket Capacity Range Cat Truck Match – Standard Cat Truck Match – High Lift

Transmission Type Forward 1 Forward 2 Direct Drive – Forward 2 Direct Drive – Forward 3 Direct Drive – Forward 4 Reverse 1 Reverse 2 Direct Drive – Reverse 2 Direct Drive – Reverse 3

Cat planetary power shift 7.3 km/h 5 mph 12.2 km/h 8 mph 12.7 km/h 8 mph 22 km/h 14 mph 39 km/h 24 mph 7.6 km/h 5 mph 13.6 km/h 8 mph 14.1 km/h 9 mph 25 km/h 16 mph

• Travel speeds based on R35/65-33 tires.

Hydraulic System – Lift/Tilt Lift/Tilt System – Circuit Lift/Tilt System Pumps Maximum Flow at 2,165 rpm Relief Valve Setting – Lift/Tilt Lift Cylinder – Bore Lift Cylinder – Stroke Tilt Cylinder – Bore Tilt Cylinder – Stroke

Load Sense 2 × 110 cc variable displacement 470 L/min 123 gal/min 27 900 kPa 4,050 psi 190 mm 7.5 in 1138 mm 45 in 170 mm 6.7 in 722 mm 28.4 in

986H Wheel Loader Specifications

Hydraulic Cycle Time Rackback Raise Dump Lower Lower Float Down Total Hydraulic Cycle Time

Axles 4.5 Seconds 8.5 Seconds 3 Seconds 4.9 Seconds 4.3 Seconds 15.8 Seconds

Front Rear Oscillation Angle

Brakes Brakes

Service Refill Capacities Fuel Tank Cooling Systems Crankcase Transmission Axle Oil Differentials and Final Drives – Front Differentials and Final Drives – Rear Hydraulic System Factory Fill Hydraulic System (tank only)

Fixed Trunnion ±12.5°

600 L 90 L 34 L 75 L 356 L 186 L 170 L 330 L 125 L

159 gal 24 gal 9 gal 20 gal 94 gal 49 gal 45 gal 87 gal 33 gal

5.3-7.6 m3

7-10 yd3

SAE J1473 OCT90, ISO 3450:1992

Hydraulic System – Steering Steering System – Circuit Steering System – Pump Maximum Flow @ 2,284 rpm Steering Cutoff Pressure Total Steering Angle

Load Sense Piston, variable displacement 200 L/min 52 gal/min 27 600 kPa 4,000 psi 70 degrees

Buckets Bucket Capacities

986H Wheel Loader Specifications Dimensions All dimensions are approximate.

1 Ground to Top of ROPS 2 Ground to Top of Exhaust Stacks

High Lift Linkage 4110 mm 13.5 ft

3940 mm

12.9 ft

3940 mm

12.9 ft

3 Ground to Top of Hood 4 Ground to Center of Rear Axle

2991 mm

9.8 ft

2991 mm

9.8 ft

978 mm

3.2 ft

978 mm

3.2 ft

5 Ground to Fuel Tank Clearance 6 Ground to Lower Hitch Clearance

691 mm

2.3 ft

691 mm

2.3 ft

459 mm

1.5 ft

459 mm

1.5 ft

7 Reach at Maximum Lift 8 Clearance at Maximum Lift

2022 mm

6.6 ft

1904 mm

6.2 ft

3234 mm

10.6 ft

3738 mm

12.3 ft

4912 mm

16.1 ft

5371 mm

17.6 ft

6671 mm

21.9 ft

7067 mm

23.2 ft

3132 mm

10.3 ft

3132 mm

10.3 ft

9 B-Pin Height at Maximum Lift 10 Maximum Overall Height, Bucket Raised 11 Rear Axle Center Line to Bumper 12 Wheel Base 13 Maximum Overall Length 14 Front Axle Centerline to Bucket Tip

Standard Lift Linkage 4110 mm 13.5 ft

3810 mm

12.5 ft

3810 mm

12.5 ft

10 907 mm

35.8 ft

11 290 mm

37.0 ft

3987 mm

13.1 ft

4370 mm

14.3 ft

986H Wheel Loader Specifications Bucket Capacity/Material Density Selection Guide Rock Buckets – Standard Lift – 10 tonnes (11 tons) Rated Payload Material Density kg/m 1632-1795 1740-1914 1865-2051 3

lb/yd 2,750-3,025 2,933-3,227 3,143-3,457 3

Bucket Volume 3

tonnes/m 1.63-1.80 1.74-1.91 1.86-2.05

tons/yd 1.38-1.51 1.46-1.61 1.57-1.73

m 6.1 5.7 5.4

tonnes/m 1.55-1.71 1.66-1.82 1.78-1.95

tons/yd 1.31-1.44 1.39-1.54 1.50-1.65

m 6.1 5.7 5.4

tons/yd3 1.30-1.43 1.44-1.59 1.63-1.79

m3 7.6 6.9 6.1

tons/yd3 1.10-1.21 1.22-1.34 1.38-1.51

m3 7.6 6.9 6.1

yd3 8.0 7.5 7.0

Rock Buckets – High Lift – 9.5 tonnes (10.5 tons) Rated Payload Material Density kg/m 1553-1708 1659-1822 1775-1952 3

lb/yd 2,618-2,879 2,796-3,072 2,992-3,291 3

Bucket Volume 3

yd3 8.0 7.5 7.0

General Purpose Buckets – Standard Lift – 12 tonnes (13 tons) Rated Payload Material Density kg/m3 1579-1737 1739-1913 1967-2164

lb/yd3 2,600-2,860 2,889-3,177 3,250-3,575

tonnes/m3 1.57-1.73 1.73-1.91 1.96-2.16

Bucket Volume yd3 10.0 9.0 8.0

General Purpose Buckets – High Lift – 10 tonnes (11 tons) Rated Payload Material Density kg/m3 1316-1447 1449-1594 1639-1803

lb/yd3 2,200-2,420 2,444-2,689 2,750-3,025

tonnes/m3 1.31-1.44 1.45-1.59 1.63-1.80

Bucket Volume yd3 10.0 9.0 8.0

Note: Rated Payload is the material weight in the bucket that the loader is designed to carry, excluding the weight of the bucket, GET, and wear material. Rated Payloads are published at 100%, even though Caterpillar does allow 110%. These values are given in terms of mass. There is no consideration to loose density weights of various materials since they are so diverse.

986H Wheel Loader Specifications Operating Specifications – Standard Lift Tires: 35/65-33

Part Number: 359-4566

Bucket Type Ground Engaging Tools Cutting Edge Type Bucket Part No. Struck Capacity Heaped Capacity (rated) Width Dump Clearance at Full Lift and 45° Discharge (edge) Dump Clearance at Full Lift and 45° Discharge (with teeth) Reach at Lift and 45° Discharge (edge) Reach at Lift and 45° Discharge (with teeth) Reach with Lift Arms Horizontal and Bucket Level Digging Depth Overall Length Overall Height with Bucket at Full Raise Loader Clearance Turning Radius (SAE carry with teeth) Full Dump Angle Static Tipping Load Straight (no tire squash) Static Tipping Load Straight (with tire squash) Static Tipping Load – Full Turn (articluated 35°) (no tire squash) Static Tipping Load – Full Turn (articluated 35°) (with tire squash) Breakout Force Operating Weight Weight Distribution at SAE Carry (unloaded) – Front Weight Distribution at SAE Carry (unloaded) – Rear Weight Distribution at SAE Carry (loaded) – Front Weight Distribution at SAE Carry (loaded) – Rear

Rock

HD Rock

Teeth & Segments

Spade

m3 yd3 m3 yd3 mm ft mm ft mm ft mm ft mm ft mm ft mm in mm ft mm ft mm ft deg kg lb kg lb kg lb

369-2020 4.4 5.8 5.4 7.0 3772 12.4 3420 11.2 3280 10.8 1858 6.1 1976 6.5 3657 12.0 160 6.3 10 842 35.6 6609 21.7 17 215 56.5 –50.2 29 147 64,259 27 698 61,064 25 845 56,979

369-2030 4.8 6.2 5.7 7.5 3772 12.4 3374 11.1 3234 10.6 1904 6.2 2022 6.6 3722 12.2 160 6.3 10 907 35.8 6671 21.9 17 248 56.6 –50.2 28 969 63,866 27 509 60,647 25 673 56,600

369-2040 5.1 6.7 6.1 8.0 3772 12.4 3328 10.9 3188 10.5 1950 6.4 2068 6.8 3787 12.4 160 6.3 10 972 36.0 6734 22.1 17 281 56.7 –50.2 28 791 63,472 27 319 60,228 25 501 56,220

436-8300 4.4 5.8 5.4 7.0 3840 12.6 3280 10.8 3051 10.0 1774 5.8 1931 6.3 3827 12.6 149 0.5 11 003 36.1 6609 21.7 17 475 57.3 –50.2 27 906 61,522 26 476 58,370 24 599 54,231

kg lb kN lb-f kg lb kg lb kg lb kg lb kg lb

23 846 52,571 356 79,945 42 011 92,618 20 493 45,178 21 518 47,439 37 109 81,811 14 902 32,853

23 661 52,164 341 76,722 42 118 92,855 20 689 45,612 21 429 47,242 37 340 82,320 14 778 32,580

23 476 51,756 328 73,722 42 225 93,090 20 885 46,044 21 340 47,046 37 571 82,830 14 654 32,307

22 622 49,873 335 75,311 43 119 95,061 22 443 49,478 20 676 45,583 39 031 86,049 14 088 31,059

986H Wheel Loader Specifications Operating Specifications – Standard Lift Tires: 35/65-33

Part Number: 359-4566

General Purpose

Coal

Segments

Straight

m3 yd3 m3 yd3 mm ft mm ft mm ft mm ft mm ft mm ft mm in mm ft mm ft mm ft deg kg lb kg lb kg lb

436-8310 5.2 6.8 6.1 8.0 3687 12.1 3481 11.4 — — 1616 5.3 — — 3294 10.8 143 0.5 10 465 34.3 6844 22.5 17 273 56.7 –50.2 29 367 64,743 27 886 61,478 26 061 57,455

436-8320 5.9 7.6 6.9 9.0 3687 12.1 3385 11.1 — — 1696 5.6 — — 3419 11.2 143 0.5 10 590 34.7 6965 22.9 17 336 56.9 –50.2 29 010 63,956 27 516 60,662 25 717 56,696

436-8330 6.6 8.6 7.7 10.0 3687 12.1 3292 10.8 — — 1773 5.8 — — 3540 11.6 143 0.5 10 711 35.1 7063 23.2 17 398 57.1 –50.2 28 661 63,187 27 143 59,840 25 381 55,955

436-8340 9.0 11.8 10.3 13.5 3729 12.2 3164 10.4 — — 1857 6.1 — — 3692 12.1 160 0.5 10 877 35.7 7394 24.3 17 542 57.6 –50.2 28 343 62,486 26 694 58,850 25 044 55,213

kg lb kN lb-f kg lb kg lb kg lb kg lb kg lb

24 025 52,966 400 89,924 41 953 92,490 20 298 44,749 21 655 47,741 36 919 81,392 15 034 33,144

23 664 52,170 367 82,505 42 165 92,958 20 682 45,596 21 483 47,362 37 370 82,387 14 795 32,617

23 303 51,374 340 76,435 42 371 93,412 21 056 46,420 21 315 46,991 37 811 83,359 14 560 32,099

22 810 50,287 307 69,016 42 894 94,565 21 991 48,482 20 902 46,081 37 448 82,559 14 518 32,007

986H Wheel Loader Specifications Operating Specifications – High Lift Tires: 35/65-33

Part Number: 359-4566

Rock

HD Rock

Teeth & Segments

Spade

m3 yd3 m3 yd3 mm ft mm ft mm ft mm ft mm ft mm ft mm in mm ft mm ft mm ft deg kg lb kg lb kg lb

369-2020 4.4 5.8 5.4 7.0 3772 12.4 3879 12.7 3738 12.3 1798 5.9 1904 6.2 4021 13.2 208 8.2 11 290 37.0 7067 23.2 17 612 57.8 –49.9 24 759 54,584 23 632 52,100 21 845 48,159

369-2030 4.8 6.2 5.7 7.5 3772 12.4 3833 12.6 3693 12.1 1840 6.0 1946 6.4 4086 13.4 208 8.2 11 355 37.3 7130 23.4 17 648 57.9 –49.9 24 595 54,223 23 458 51,716 21 686 47,809

369-2040 5.1 6.7 6.1 8.0 3772 12.4 3787 12.4 3647 12.0 1882 6.2 1988 6.5 4151 13.6 208 8.2 11 420 37.5 7193 23.6 17 684 58.0 –49.9 24 431 53,862 23 284 51,332 21 527 47,458

436-8300 4.4 5.8 5.4 7.0 3840 12.6 3833 12.6 3618 11.9 1992 6.5 2169 7.1 4191 13.7 197 0.6 11 453 37.6 7067 23.2 17 872 58.6 –49.9 23 528 51,870 22 417 49,421 20 610 45,437

kg lb kN lb-f kg lb kg lb kg lb kg lb kg lb

20 251 44,646 355 79,869 42 836 94,437 22 262 49,079 20 574 45,358 38 451 84,769 13 457 29,668

20 081 44,271 341 76,650 42 943 94,673 22 471 49,541 20 472 45,132 38 691 85,299 13 324 29,375

19 911 43,896 328 73,652 43 050 94,909 22 680 50,002 20 370 44,907 38 931 85,828 13 191 29,081

19 033 41,961 334 75,086 43 944 96,880 24 350 53,682 19 594 43,197 40 516 89,322 12 500 27,558

986H Wheel Loader Specifications Operating Specifications – High Lift Tires: 35/65-33

Part Number: 359-4566

General Purpose

Coal

Segments

Straight

m3 yd3 m3 yd3 mm ft mm ft mm ft mm ft mm ft mm ft mm in mm ft mm ft mm ft deg kg lb kg lb kg lb

436-8310 5.2 6.8 6.1 8.0 3687 12.1 4018 13.2 — — 1816 6.0 — — 3658 12.0 190 0.6 10 915 35.8 7303 24.0 17 665 58.0 –49.9 24 954 55,014 23 802 52,474 22 037 48,583

436-8320 5.9 7.6 6.9 9.0 3687 12.1 3930 12.9 — — 1904 6.2 — — 3783 12.4 190 0.6 11 040 36.2 7423 24.4 17 733 58.2 –49.9 24 627 54,293 23 462 51,725 21 720 47,884

436-8330 6.6 8.6 7.7 10.0 3687 12.1 3844 12.6 — — 1990 6.5 — — 3904 12.8 190 0.6 11 161 36.6 7522 24.7 17 801 58.4 –49.9 24 309 53,592 23 123 50,977 21 412 47,205

436-8340 9.0 11.8 10.3 13.5 3729 12.2 3725 12.2 — — 2085 6.8 — — 4056 13.3 208 0.7 11 325 37.2 7853 25.8 17 945 58.9 –49.9 23 938 52,774 22 642 49,917 21 028 46,359

kg lb kN lb-f kg lb kg lb kg lb kg lb kg lb

20 414 45,005 400 89,924 42 778 94,309 22 062 48,638 20 716 45,671 38 256 84,340 13 593 29,967

20 083 44,275 367 82,505 42 990 94,777 22 471 49,540 20 518 45,234 38 726 85,376 13 336 29,401

19 753 43,548 339 76,210 43 196 95,231 22 871 50,422 20 325 44,809 39 185 86,388 13 083 28,843

19 244 42,426 307 69,016 43 719 96,384 23 853 52,587 19 866 43,797 40 387 89,038 12 404 27,346

986H Standard Equipment Standard Equipment Standard equipment may vary. Consult your Cat dealer for details. ELECTRICAL • Alarm, back-up • Alternator, 115 amp • Batteries, dry • Battery disconnect switch • Converter, 10/15 amp, 24V to 12V • Lighting system (halogen, work lights) OPERATOR ENVIRONMENT • Air conditioner • Cab, sound suppressed and pressurized • Cigar lighter, ashtray • Controls, lift and tilt function • Heater, defroster • Horn • Instrumentation, gauges – Coolant temperature – Engine hour meter – Hydraulic oil temperature – Power train oil temperature • Light, cab, dome • Lunchbox, beverage holders • Mirrors, rearview (externally mounted) • Seat, Cat Comfort (cloth), air suspension, six-way adjustable • Seat belt, retractable • Tinted glass • Transmission gear indicator • Wet-Arm wipers/washers (front and rear) – Intermittent front and rear wipers

POWER TRAIN • Brakes, oil-cooled, multi-disc, service/secondary • Driveline parking brake • Engine, C15 ACERT diesel, turbocharged/aftercooled • Fuel priming pump (electric) • Ground level engine shutoff • Precleaner, engine air intake (above hood) • Radiator • Torque converter with LUC • Transmission, planetary powershift, 4F/3R electronic control OTHER • Doors, service access (locking) • Fuel tank • Hitch, drawbar with pin • Hoses, Cat XT™ • Hydraulic, steering and brake filtration/screening system • Mufflers • Oil sampling valves • Premixed 50% concentration of extended life coolant with freeze protection to –34° C (–29° F) • Steering, load sensing

986H Optional Equipment and Mandatory Attachments Optional Equipment With approximate changes in operating weights. Optional equipment may vary. Consult your Cat dealer for specifics. LINKAGE • Quick coupler ELECTRICAL • Batteries – additional

OPERATOR ENVIRONMENT • AM/FM/CD radio • Rearview camera (WAVS) • LED strobe warning beacon • Radio ready

Mandatory Attachments Select one from each group. Mandatory and optional equipment may vary. Consult your Cat dealer for specifics. LINKAGE • Autolube • Manual grease pins • Standard linkage • High lift linkage ELECTRICAL • No Product Link™ • Product Link (Satellite) • Product Link (Cellular) STEERING • Standard steering • Secondary steering POWER TRAIN • Axle oil cooler • Standard axles

LIGHTING • Standard lighting (4 floods) • Deluxe lighting (9 floods) • HID lighting (4 floods, 4 HIDs) OPERATOR ENVIRONMENT • Standard seat • Heated seat HYDRAULICS • Ride Control • No Ride Control • Two function hydraulic system (standard lift/tilt) • Three function hydraulic system (one auxiliary function) FUEL SYSTEM • Cold weather starting package • Conventional fuel arrangement

For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com © 2014 Caterpillar All rights reserved Materials and specifications are subject to change without notice. Featured machines in photos may include additional equipment. See your Cat dealer for available options. CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, “Caterpillar Yellow” and the “Power Edge” trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

AEHQ6848-01 (01-2014) Replaces AEHQ6848