RACE WINNING
COMPONENTS
Fatbar lite carbon ®
The Fatbar Lite Carbon is the ultimate light-weight, trail-proof handlebar.
Features
The Fatbar Lite Carbon is designed for Trail, Enduro and XC riders and racers. It is a clear market leader in terms of weight, strength, stiffness and most importantly, ‘ride-feel’. An extensive R&D process ensures the Fatbar Lite Carbon feels like a Renthal handlebar, whilst retaining the strength and durability of a Renthal handlebar. We have achieved all of this, but at a super-low, market leading weight of just 180g with a trail spec 740mm width.
• UD Carbon construction • Ride tuned for the ultimate combination of stiffness and shock absorption • Increased width oversize centre section, for fine-tuned flex characteristics • Surpasses EN BMX drop test standard • Trail Spec 740mm width • Permanent graphics, with set-up grid and cut marks • Market leading 180g weight
Continuing the Renthal philosophy that rider choice is vital, we offer the bar in 10, 20, 30 and 40mm rise options, allowing you to dial in your position to your bike type, riding style and personal preference. Renthal® Fatbar® Lite Carbon handlebars are designed to ride faster, jump further and last longer.
10mm Rise [ M128 ] Weight : 180g Colour : Raw Carbon/ AluGold Back Sweep : 7 degrees Up Sweep : 5 degrees Width : 740mm
20mm Rise [ M129 ] Weight : 180g Colour : Raw Carbon/ AluGold Back Sweep : 7 degrees Up Sweep : 5 degrees Width : 740mm
30mm Rise [ M130 ] Weight : 180g Colour : Raw Carbon/ AluGold Back Sweep : 7 degrees Up Sweep : 5 degrees Width : 740mm
40mm Rise [ M131 ] Weight : 180g Colour : Raw Carbon/ AluGold Back Sweep : 7 degrees Up Sweep : 5 degrees Width : 740mm
2
ec
p li s
tra rbo
ca
h
ec t n
740
mm
width
180
g
weight
Neil Donoghue
3
Fatbar Lite ®
10mm Rise [ M118 ]
20mm Rise [ M119 ]
30mm Rise [ M120 ]
40mm Rise [ M121 ]
Weight : 269g Colour : AluGold Back Sweep : 7 degrees Up Sweep : 5 degrees Width : 740mm
Weight : 269g Colour : AluGold Back Sweep : 7 degrees Up Sweep : 5 degrees Width : 740mm
Weight : 271g Colour : AluGold Back Sweep : 7 degrees Up Sweep : 5 degrees Width : 740mm
Weight : 272g Colour : AluGold Back Sweep : 7 degrees Up Sweep : 5 degrees Width : 740mm
The Renthal® Fatbar® Lite is the ultimate lightweight, aluminium, trail-proof handlebar. This handlebar ticks all the boxes, with ample width, an optimized lightweight taper tube construction and four rise options. The Renthal Fatbar Lite is the aluminium handlebar of choice for any rider searching for the ultimate in control and durability and the minimum weight. Renthal Fatbar® Lite handlebars are designed to ride faster, jump further and last longer.
Fabien Barel
2013 3rd in World Enduro Series
4
• High strength 7 series aluminium alloy • Optimized lightweight tapered tube • Corrosion and abrasion resistant hard anodised finish • Shot peened for increased fatigue life • Laser etched positioning grid for easy set up • Width marks allow personalised fit adjustment • Permanent Graphics • 31.8mm clamping diameter
Jared Graves
2013 2nd in World Enduro Series
5
Fatbar
®
With Six World Championships won since 2010, the Fatbar is the performance rider’s weapon of choice. Renthal handlebars are designed to offer the ultimate combination of lightness, strength and durability. Renthal Fatbar® handlebars are designed to let you ride faster, jump further and last longer. • Four rise options available • High strength 7 series aluminium alloy • 31.8mm clamping diameter • Hard anodised for a corrosion and abrasion resistant finish • Shot peened for improved fatigue life • Laser etched positioning grid for easy set up • Width marks allow riders to personalise their fit • Permanent graphics
Richie Rude
2013 World Junior Downhill Champion
6
10mm Rise [ M110 ]
20mm Rise [ M109 ]
Weight : 355g Colour : AluGold Back Sweep : 7 degrees Up Sweep : 5 degrees Width : 780mm
Weight : 360g Colour : AluGold Back Sweep : 7 degrees Up Sweep : 5 degrees Width : 780mm
30mm Rise [ M117 ]
38mm Rise [ M108 ]
Weight : 365g Colour : AluGold Back Sweep : 7 degrees Up Sweep : 5 degrees Width : 780mm
Weight : 365g Colour : AluGold Back Sweep : 7 degrees Up Sweep : 5 degrees Width : 780mm
Aaron Gwin
Multiple World Cup and US Champion
7
Moto BMX Bars tm
Borrowing technology from our championship winning motocross handlebars, the Moto BMX racing handlebar offers the ultimate combination of lightness, strength and durability.
MOTO24 [ M114 ]
The all aluminium Moto boasts all the strength and durability of a high quality welded chromoly bar, but with an astounding weight advantage.
Weight : 547g Colour : Black/AluGold Sweep : 12 degrees Rise : 140mm / 5.5in Width : 699mm / 27.5in
• Exclusive, high strength, lightweight aluminium alloy • Patented single bolt aluminium brace clamps • Shot peened for increased fatigue life • Corrosion resistant anodised finish • Laser etched positioning grid for easy set up • Permanent graphics • Three sizes available
MOTO20XL [ M116 ] Weight : 638g Colour : Black/AluGold Sweep : 12 degrees Rise : 210mm / 8.25in Width : 736mm / 29in
MOTO24 [ M115 ] Weight : 611g Colour : Black/AluGold Back Sweep : 12 degrees Rise : 190mm / 7.5in Width : 711mm / 28in
Liam Phillips
2013 UCI BMX World Champion
Jumpbar
tm
• High strength 7 series aluminium alloy • Laser etched positioning grid & width marks • Three rise options available • Permanent Graphics • 22.2mm diameter (25.4mm shims supplied)
8
Specification Colour : Black Back Sweep : 8.5 degrees Up Sweep : 5 degrees Width : 720mm
Lo Rise [ M111 ]
Mid Rise [ M112 ]
Hi Rise [ M113 ]
Rise : 25mm
Rise : 50mm
Rise : 75mm
Integra Stem tm
The Renthal Integra stem combines high strength and stiffness, with ultra low weight. The horizontally divided, two-piece clamp, allows the use of just six bolts to vastly reduce overall weight. An ultra-wide, 64mm handlebar clamp increases torsional rigidity. Superior strength and structural stability is gained from the horizontally divided, two-piece construction. The uninterrupted U-shape clamping area eliminates stress risers found on most other clamps, which can lead to handlebar failure. TM
• CNC machined from 6082 T6 aluminium alloy • Minimal 6-bolt, split stem design • U-shape cradle clamp eliminates handlebar stress risers found with traditional stems • Ultra-wide 64mm clamp width • 45 or 50mm adjustable offset • 138g (including all mount hardware)
Integra [ STM 200 ] Weight : 138g Rise : Zero Offset : 45 / 50mm Mount : Boxxer / Fox IS
Duo Stem tm
Renthal’s revolutionary Duo stem combines high strength with ultra-low weight. The horizontally divided design allows unrestricted access to the stem core, enabling maximum weight reduction without compromising strength. An uninterrupted U shape clamping area, eliminates stress risers found on most other stems, which can lead to handlebar failure. TM
Duo 40mm [ STM 109 ] Weight : 124g Rise : 10 degrees Offset : 40mm Bar Clamp : 31.8mm
• CNC Machined from 6082 T6 aluminium alloy • Split stem design for maximum weight reduction • U shape clamping area, eliminating stress risers • 31.8mm handlebar diameter
Duo 50mm [ STM 100 ] Weight : 143g Rise : 10 degrees Offset : 50mm Bar Clamp : 31.8mm
9
Lock-on Grips The handlebar grip is your key contact point for controlling your bike. Having a grip suited to your individual demands is hugely important. We developed our Lock-On grip with four unique compounds, to give the rider the widest choice of any grip.
Medium [ G119 ]
• CNC machined 6082 T6 aluminium locking collars • Permanently integrated construction, for ultimate durability • Four compounds available • Diamond knurl pattern • Smooth profile end transition for comfort • 130mm overall width, 110mm grip section • Optimised 30mm OD • Snap-fit end caps
Soft [ G118 ]
Super Comfort [ G122 ]
Kevlar ® [ G121 ] Renthal Kevlar® brand resin grips contain millions of randomly aligned Kevlar® brand resin particles suspended in the base material. In use, more particles are exposed, resisting wear and retaining a soft and tacky feel. This is our ultimate grip compound. Compound Push-On P Firm P Medium P Soft O Super Comfort P Kevlar ®
Lock-On O P P P P
Tackiness ★★ ★★★ ★★★★ ★★★★★ ★★★★
Absorption ★★ ★★★ ★★★★ ★★★★★ ★★★★
Durability ★★★★★ ★★★★ ★★★ ★★ ★★★★
Control ★★★★★ ★★★★★ ★★★★ ★★ ★★★★
Kevlar® is a registered trademarks of E.I du Pont de Nemours and Company
Push-On Grips Renthal push-on grips are available in four advanced synthetic rubber compounds to give the optimum combination of durability, tackiness and shock absorption to suit every rider. • Soft, Medium, Firm and Kevlar® compounds • 135mm length • All compounds come with plastic end plugs
10
Kevlar ® [ G117 ] Soft [ G114 ]
Medium [ G115 ]
Firm [ G116 ]
Ultralite ChainRing tm
TM
Using all of our racing experience we have designed and developed these Ultralite chainrings to offer the ultimate combination of lightness, strength and durability. Renthal Ultralite chainrings are designed to let you ride faster, jump further and last longer. • Computer aided Ultralite design enables the ultimate combination of strength and lightness • High strength 7075-T6 aluminum alloy provides excellent longevity • Precision CNC machined to extremely tight tolerances • Hard anodised surface coating for increased longevity • Compatible with 8, 9 and 10 speed chain
SR4 (Single Ring 4 arm)
MCR100
• Hard Anodised surface finish • CNC Machined • 7075 Aluminium alloy • 8, 9 and 10 speed compatible • 104mm BCD • 32T = 35g • 32,33,34,35,36,37,38,39,40,41, 42,43,44T
MCR104
4X Chainwheel
BMX Chainwheel
MCR102
MCR101
• Hard Anodised surface finish • CNC Machined • 7075 Aluminium alloy • 8, 9 and 10 speed compatible • 23.8mm axle hole with alloy adaptors for 19mm & 22mm axles • 34T = 90g • 34,36,38,40,42,44T
• Hard Anodised surface finish • CNC Machined • 7075 Aluminium alloy • Compatible with 1/8” and 3/32 chain • 23.8mm axle hole with alloy adaptors for 19mm & 22mm axles • 28T = 55g • 25,27,28,30,32T
Spec as MCR100, except; • 120mm BCD • Threaded for std SRAM hardware • 36,37,38T (36T = 40g)
Padded Cell • Low profile design • Hook and loop fabric fastening • Double stitched construction • Durable screen print logo • Four sizes available
Part Number MBA-CSP-XS MBA-CSP-S MBA-CSP-M MBA-CSP-L
Size X-SMALL SMALL MEDIUM LARGE
Length 250mm 250mm 250mm 250mm
Min circumference 50mm 60mm 85mm 110mm
Max circumference 80mm 100mm 140mm 180mm
11
world Championship winning components With Six World Championships won since 2010, Renthal cycle products are the choice of the performance rider. Renthal cycle products are designed, developed and manufactured at our facilities in Manchester, England. We use the highest quality materials, engineering and craftsmanship, to provide you with premium parts that are extremely lightweight and durable. Hit the trail at full speed on any Renthal product, confident that it has been manufactured by a company run by engineers with an obsession for engineering excellence and quality. A fraction of a second. A few grams. A couple of millimetres. It all counts. Welcome to the winning world of Renthal.
www.renthalcycling.com This symbol, Renthal速 & Fatbar 速 are registered trademarks of Renthal Ltd. England