ReportLinker
Find Industry reports, Company profiles and Market Statistics
>> Get this Report Now by email!
Lithography, Deposition, and Etch Market Analysis for Flip Chip/WLP Manufacturing Published on July 2014
Report Summary Flip chips are appearing in a plethora of high-volume consumer products such as mobile phones, digital cameras, MP3 players, and computer peripherals. Wafer-level packaging (WLP), the fabrication of the package directly on the wafer, is experiencing exceptional growth and stands out as one of the bright growth areas in electronics today. WLP offers lower cost, a smaller package, higher performance and added functionality compared to older methods. This report examines the market for flip chip ICs, and the lithography and wet etch tools used in their manufacture. Total flip chip sales represented 11% of worldwide IC production in 2010 but will grow to more than 18% in 2017 Flip chip comprised only 5% of IC production in 2005. Equipment vendors are taking advantage of the booming market. Overall semiconductor front-end (before the flip chip packaging steps) equipment sales will exhibited a growth rate 4% between 2010 and 2013. In contrast, sputtering and copper electrodeposition equipment, main sectors of the flip chip equipment market, exhibited a growth rate of 17%. Why is flip chip projected to grow so strongly' It is widely understood that flip chips offer a variety of benefits compared to traditional wire-bond packaging, including superior thermal and electrical performance. In the world of high-speed/high-performance IC and package design, flip chips are appearing in a plethora of high-volume consumer products such as mobile phones, digital cameras, MP3 players, and computing. In Apple Computer's (AAPL) iPad, 20% of the ICs on the motherboard are made up of flip chip packages. The same percentage holds for the Motorola (MOT) Android. For mobile devices, the market is projected to grow at a CAGR of 30%, from a little more than 500 million ICs in 2010 to 1.9 billion in 2015 ' a huge growth rate compared to less than a 10% growth rate for overall ICs. A $500 million lithography market in 2017
Table of Content TABLE OF CONTENTS Chapter 1 Introduction 1-1 Chapter 2 Executive Summary 2-1 Chapter 3 Flip Chip/WLP Issues and Trends 3-1 3.1 Introduction 3-1 3.2 Wafer Bumping 3-6
Lithography, Deposition, and Etch Market Analysis for Flip Chip/WLP Manufacturing (From Issuu)
Page 1/6
ReportLinker
Find Industry reports, Company profiles and Market Statistics
>> Get this Report Now by email! 3.2.1 Solder Bumps 3-7 3.2.1.1 Metallurgy 3-7 3.2.1.2 Deposition Of UBM 3-11 3.2.1.3 Sputter Etching 3-12 3.2.1.4 Photolithography 3-13 3.2.1.5 Solder Deposition 3-14 3.2.1.6 Resist Strip 3-15 3.2.1.7 UBM Wet Etch 3-16 3.2.1.8 Reflow 3-16 3.2.1.9 Flux Issues 3-18 3.2.2 Gold Bumps 3-19 3.2.2.1 Bump Processing 3-19 3.2.2.2 Bonding 3-21 3.2.2.3 Coplanarity 3-25 3.2.2.4 Conductivity 3-26 3.2.2.5 Thermal Properties 3-26 3.2.2.6 Size 3-27 3.2.2.7 Reliability 3-27 3.2.2.8 Cost Issues 3-28 3.2.3 Copper Pillar Bumps 3-31 3.2.4 Copper Stud Bumping 3-35 3.2.5 C4NP 3-40 3.3 Wafer Level Packaging 3-46 3.4 Pad Redistribution 3-53 3.5 Wafer Bumping Costs 3-57 3.5.1 Wafer Redistribution And Wafer Bumping Costs 3-58 3.5.2 WLCSP Hidden Costs 3-59 3.5.3 WLCSP Cost Per Good Die 3-60 3.5.4 Wafer-Level Underfill Costs 3-61 Chapter 4 Lithography Issues And Trends 4-1 4.1 Issues 4-1 4.1.1 Technical Performance 4-2 4.1.2 Capital Investment 4-2 4.1.3 Cost Of Consumables 4-2 4.1.4 Throughput 4-2 4.1.5 Ease Of Use 4-3 4.1.6 Flexibility 4-3 4.1.7 Equipment Support 4-3 4.1.8 Resolution 4-3 4.1.9 Solder Bumping Capabilities 4-4 4.1.10 Gold Bumping Capabilities 4-5 4.2 Exposure Systems 4-6 4.2.1 Introduction 4-6 4.2.1.1 Reduction Steppers 4.6 4.2.1.2 Full-Field Projection 4-8 4.2.1.3 Mask Aligners 4-13
Lithography, Deposition, and Etch Market Analysis for Flip Chip/WLP Manufacturing (From Issuu)
Page 2/6
ReportLinker
Find Industry reports, Company profiles and Market Statistics
>> Get this Report Now by email! 4.2.1.4 1X Steppers 4-13 4.3 Competitive Technologies 4-16 4.3.1 Inkjet Printing 4-16 4.3.2 Stencil/Screen Printing 4-18 4.3.3 Electroless Metal Deposition 4-22 Chapter 5 UBM Etch Issues And Trends 5-1 5.1 Introduction 5-1 5.2 Technology Issues And Trends 5-2 5.2.1 Process Flow 5-2 5.2.2 Etch Process 5-4 5.2.3 Etch Chemistry 5-8 5.3 Batch Versus Single-Wafer Etching 5-16 Chapter 6 Metallization Issues and Trends 6-1 6.1 Introduction 6-1 6.2 Sputtering Metallization 6-3 6.2.1 Gold Bump 6-3 6.2.2 Solder Bumping 6-4 6.2.2.1 T i / Cu and TiW / Cu 6-5 6.2.2.2 Al / NiV / Cu 6-5 6.2.2.3 T i / N i (V) and TiW / Ni ( V ) 6-6 6.2.2.4 Cr / Cr-Cu / Cu 6-6 Chapter 7 Market Analysis 7-1 7.1 Market Drivers For Flip Chip And WLP 7-1 7.1.1 WLP For Small Die 7-2 7.1.2 WLP For Medium Die 7-2 7.1.3 WLP For Large Die 7-3 7.2 Market Opportunities 7-5 7.3 Challenges 7-9 7.4 Flip Chip Market 7-12 7.4.1 Market Dynamics 7-12 7.4.2 Market Forecast 7-20 7.5 Lithography Market 7-26 7.5.1 Aligners Vs. Steppers 7-26 7.5.2 Market Analysis 7-27 7.6 Wet Etch Market 7-32 7.7 Deposition Market 7-37
TABLES 3.1 Common UBM Stacks For Solder And Gold Bumping 3-8 3.2 Solder Bumping Guidelines 2-10
Lithography, Deposition, and Etch Market Analysis for Flip Chip/WLP Manufacturing (From Issuu)
Page 3/6
ReportLinker
Find Industry reports, Company profiles and Market Statistics
>> Get this Report Now by email! 3.3 Gold Bumping Guidelines 3-24 3.4 Copper Bumping Guidelines 3-34 3.5 Comparison Of Solder Bumping Processes 3-43 4.1 Key Challenges For WLP Lithography 4-12 4.2 Lithography Tools By Vendor 4-15 5.1 UBM Film Etchants 5-10 5.2 Advantages Of Spin Processing 5-19 6.1 Common UBM Stacks For Gold And Solder Bumping 6-2 7.1 WLP Demand by Device (Units) 7-24 7.2 WLP Demand by Device (Wafers) 7-25 7.3 Comparison Of Mask Aligners Versus Steppers 7-28 7.4 Worldwide Lithography Forecast 7-29 7.5 Worldwide Forecast For UBM Etch Tools 7-34 7.6 Worldwide Forecast For UBM Etchants 7-36 7.7 Worldwide Forecast For Deposition Tools 7-38
FIGURES 3.1 C4 Chip Connections 3-3 3.2 Wafer Bump Technology Roadmap 3-4 3.3 Comparison Of Copper Pillar, Flip Chip, And WLP 3-5 3.4 Solder Bumping Process 3-9 3.5 Three Process Flows For Solder Bumping 3-17 3.6 Gold Bumping Process 3-23 3.7 Cost Per Gold Bumped Wafer 3-29 3.8 Copper Stud Bump 3-36 3.9 Breakdown Of Stud Bumping Costs 3-39 3.10 C4NP Process Description 3-41 3.11 Pillar-WLPCSP Process 3-51 3.12 Pad Redistribution Process 3-54 4.1 Laser-Projection Imaging 4-10 4.2 Solder Jet Technology 4-17 4.3 Principle Of Screen Printing 4-20 4.4 Principle Of Inkjet Printing 4-21 4.5 Electroless Under Bump Metallization 4-23 5.1 Electroplated Solder Bumping Process 5-3 7.1 WLP Applications By Die Size 7-4 7.2 WLP Applications 7-6 7.3 Flip Chip Market - 2012 7-21 7.4 Flip Chip Market - 2017 7-22 7.5 Historic Lithography Market Shares 7-30 7.6 Lithography Market Shares 7-31 7.7 Wet Etch Market Shares 7-35
Lithography, Deposition, and Etch Market Analysis for Flip Chip/WLP Manufacturing (From Issuu)
Page 4/6
Find Industry reports, Company profiles and Market Statistics
ReportLinker
>> Get this Report Now by email! Fax Order Form To place an order via fax simply print this form, fill in the information below and fax the completed form to: ƒ ƒ
Europe, Middle East and Africa : + 33 4 37 37 15 56 Asia, Oceania and America : + 1 (805) 617 17 93
If you have any questions please visit http://www.reportlinker.com/notify/contact
Order Information Please verify that the product information is correct and select the format(s) you require. Lithography, Deposition, and Etch Market Analysis for Flip Chip/WLP Manufacturing
Product Formats Please select the product formats and the quantity you require.
1 User License--USD 2 495.00
Quantity: _____
Contact Information Please enter all the information below in BLOCK CAPITALS
Title:
Mr
Mrs
Dr
Miss
Ms
Prof
First Name:
_____________________________ Last Name: __________________________________
Email Address:
__________________________________________________________________________
Job Title:
__________________________________________________________________________
Organization:
__________________________________________________________________________
Address:
__________________________________________________________________________
City:
__________________________________________________________________________
Postal / Zip Code:
__________________________________________________________________________
Country:
__________________________________________________________________________
Phone Number:
__________________________________________________________________________
Fax Number:
__________________________________________________________________________
Lithography, Deposition, and Etch Market Analysis for Flip Chip/WLP Manufacturing (From Issuu)
Page 5/6
Find Industry reports, Company profiles and Market Statistics
ReportLinker
>> Get this Report Now by email! Payment Information Please indicate the payment method, you would like to use by selecting the appropriate box.
Payment by credit card
Card Number: ______________________________________________
Expiry Date
__________ / _________
CVV Number _____________________
Card Type (ex: Visa, Amex…) _________________________________
Payment by wire transfer
Crédit Mutuel RIB : 10278 07314 00020257701 89 BIC : CMCIFR2A IBAN : FR76 1027 8073 1400 0202 5770 189
Payment by check
UBIQUICK SAS 16 rue Grenette – 69002 LYON, FRANCE
Customer signature:
Please note that by ordering from Reportlinker you are agreeing to our Terms and Conditions at http://www.reportlinker.com/index/terms
Please fax this form to: Europe, Middle East and Africa : + 33 4 37 37 15 56
Asia, Oceania and America : + 1 (805) 617 17 93
Lithography, Deposition, and Etch Market Analysis for Flip Chip/WLP Manufacturing (From Issuu)
Page 6/6