IN - WALL BT AUDIO SYSTEM USAGE INSTRUCTIONS Bluetooth ON/OFF
CD/DVD Input Bluetooth Input
Audio Input
SKIP Forwards Play / Pause Track
SKIP Backwards
1. Setting the local radio station’s
Press and hold the ‘SET’ key on the remote control until you see 4 lines on the display ‘ This will store the local station in your area.
2. Setting the Clock, Date and Alarm
Press and hold the ‘ ’ key for 2 seconds to set the date, time and alarm. Use the & keys to cycle up and down then press the ‘ ’key to move to the next setting. Once all times and dates are set then hold the ‘ ’ for 2 seconds or do not press any buttons for 8 seconds to exit clock and alarm setting mode
3. Mode selection Press the ‘
’ key once then use the
&
4. Setting the radio
keys to cycle through each mode. Once
Select the FM mode by following instructions in section 2. Use the & the or keys on the remote to cycle through the radio stations.
keys or
the Tuner searches for availible radio stations. If you wish to delete a saved radio station from the memory, select the radio station and press the ‘ ’ key on the remote. The next saved station will automatically start playing.
5. Volume control &
keys. The Bass and Treble can be changed via the
Page 1/2
GB0514
remote control using the remote control only.
IN - WALL BT AUDIO SYSTEM USAGE INSTRUCTIONS Bluetooth ON/OFF Bluetooth Input ON/OFF Bluetooth SKIP Forwards SKIP Backwards
Bluetooth Indicator Light USB Port AUX Input (3.5mm Jack)
SKIP Backwards
SKIP Forwards Play / Pause Track
To MAXIMISE Volume Output press the BASS+ & TREBLE+ on the remote till volume reaches the maximum setting
6. Turn on Bluetooth (Touch Panel)
When the power is first turned ON the bluetooth Blue light will flash for 5 minutes to indicate pairing process is active. To activate Bluetooth if the Blue indicator light has turned off, hold down ‘ ’ for 3 seconds.
7. Connect Mobile Device to Bluetooth Module
Turn ON Bluetooth on your mobile Device, search for ‘Retrotouch BT ‘, click to connect. You shall be prompted to enter a password code: 0000 to pair the device. The Blue indicator will remain lit. Select ’ ‘ input on the touch display OR the remote control to be able to play through Bluetooth Note: Please check your device has connected to ‘ Retrotouch BT ’
8. Playing music via Bluetooth Play your music through your device as normal, the music shall then play through the Audio System. Using the remote control use the & to skip tracks, use the to play or pause the music.
9. Charging your mobile Device via USB
To charge your mobile device insert USB into the USB port (charging times will vary according to device) Output 5V / 1A. * USB will charge only.*
FAQs 1. Q: My Music has stopped playing or is crackled. A: The Bluetooth has a range of upto 10m, please ensure you are within the permitted range OR turn the Audio system OFF/ON to reset. 2. Q: The volume at maximum whilst playing Bluetooth is low. A: To increase the volume press the ‘ BASS + ’ & ‘ TREBLE + ’ till the volume is at a sufficient level.
Page2/2
GB0514
3. Q: I cannot connect to the Bluetooth. A: Please ensure the Bluetooth is active (Blue indicator shall flash every second), if not follow steps 6 & 7.