High performance tools by Revolutions

High Performance TOOLS

VALID TO 31ST MARCH 2018

Drilling Machines

Metal Cutting Saws

PEDESTAL DRILL

• 1HP, 240V • 4 speed • Taiwanese made machine • Round cutting capacity : 90° : 180mm, 45° : 110mm

TD1316F

BANDSAW 300mm x 180mm CAPACITY

UE712A

$1295.00

SWIVEL HEAD BANDSAW 260mm x 110mm CAPACITY • Taiwanese made machine • Hydraulic down feed • 1.5HP, 240V

WP270SH-1

$2580.00

300mm SWIVEL HEAD COLDSAW • Italian made quality • 45° Swivel head left & right • 2HP, 240V • 90mm Round cutting capacity

TRS300-1

$2195.00

Workshop Equipment

• 16mm capacity • 16mm chuck • #2MT Spindle • 3/4HP, 240V motor

$515.00

GEARED HEAD DRILLING MACHINE Quality precision machine for drilling & tapping • No. 4 Morse taper spindle • 1120W 240V motor • Micro feed precision

TGD400-1

$2849.00

HOLEMAKER PRO 35 MAGNETIC BASE DRILL • Quality European Made Machine • Lightweight, only 10kg! Ideal for onsite & overhead tasks • Capacity (diameter) 35mm • Capacity (depth) 52mm

HMPRO35

$1025.00

Air Tools

1/2" DRIVE AIR IMPACT WRENCH KIT

Span x Depth : 300 x 140mm Clamping force : 670kg • Large range available up to 1500mm span • Nickel & chrome plating

• Lightweight - Only 1.7KG! • Value For Money High quality & specs • 25mm Bolt capacity • 4.8 CFM Air consumption • Includes 13, 17, 19, 21, 22, 24, 27mm sockets, 125mm extension & oiler

EC-G30CS

M7-NC4255Q-KIT

FORGED STEEL CLAMP

$67.50

FABRICATED STEEL BENCH VICE • Offset Jaw • Extra heavy-duty • 100mm jaw width • 11.2kg weight

TM104-100

$145.00

3/8" CARBIDE BURR SET • Cylindrical Aluminium Cut • Cylindrical End Cut • Cylindrical Radius End • Ball Shape • Tree Shape Radius End

CB-SET-01

$115.00

$390.00

3/4" DRIVE AIR IMPACT WRENCH • Lightweight - Only 1.9KG! • Low noise level - Only 85DB! • Powerful - 1400ft-lb Max torque! • 25mm Bolt capacity • 4.8 CFM Air consumption

M7-NC6255Q

1200 FT-LB MAX TORQUE

1400 FT-LB MAX TORQUE

$585.00

AIR NEEDLE SCALER Blow per minute : 5500 BPM Net weight : 1.3kg Needle size : 3 x 123mm (12 per set)

M7-SN1288

$205.00

FREIGHT CHARGES MAY APPLY. PRICES INCLUDE GST

BANDSAWS TO VIEW THE FULL RANGE OF TRADEMASTER BANDSAWS VISIT:

WWW.TRADEMASTERTOOLS.COM

350MM X 220MM CAPACITY SEMI-AUTO SWIVEL HEAD BANDSAW

• 2 Way swivel head 0° to 60° WE350DSA-3 • Taiwanese made machine .00 • Semi-auto operation • 2HP, 415V • 2 Speed • Remote safety stop switch • Round cut capacity 90° : 270mm, 45°R : 240mm, 45°L : 210mm • Rectangular cut capacity 90° : 350mm x 220mm, 45°R : 240mm x 160mm, 45°L : 180mm x 180mm

$7579

Taiwanese made machines Part No.

UE712A

Features

• Swivel vice enables 0° to 45° mitre cuts • Hydraulic downfeed

WP210SH

Motor

1HP, 240V

Gearbox

4 speed belt drive

Round Cutting Capacity

90° : 180mm 45° : 110mm

90° : 170mm 45° : 120mm

90° : 227mm 45° : 150mm

Rectangular Cutting Capacity

90° : 300mm x 180mm

90° : 210mm x 95mm

Price

$1295.00

$2065.00

• Swivel head 0° to 60° • Hydraulic down feed 1HP, 240V (WP210SH-1) or 1HP, 415V (WP210SH-3) 1 speed (WP210SH-1) or 2 speed (WP210SH-3)

WP270SH

WP275DS

WP310DS-3

WE350DS-3

• Swivel head 0° to 60° • Hydraulic down feed

• 2 way swivel head 0° to 60° • Hydraulic down feed

1.5HP, 240V (WP270SH-1) 1.5HP, 240V (WP275DS-1) or or 2HP, 415V 1.5HP, 415V (WP270SH-3) 1.5HP, 415V (WP275DS-3) 1 speed (WP270SH-1) or 2 speed (WP270SH-3)

2 speed

90° : 227mm 45° : 150mm

90° : 250mm 45°(R) : 200mm 45°(L) : 150mm

90° : 270mm 45°R : 240mm 45°L : 210mm

90° : 260mm x 110mm 45° : 200mm x 145mm

90° : 260mm x 110mm 45°R : 200mm x 125mm 45°L : 160mm x 110mm

90° : 310mm x 210mm 45°R : 200mm x 140mm 45°L : 170mm x 90mm

90° : 350mm x 220mm 45°R : 240mm x 160mm 45°L : 180mm x 180mm

$2580.00

$3790.00

$5175.00

$6420.00

350mm COLD CUT T.C.T. SAW

400mm T.C.T. NON-FERROUS SAW

• Cuts through RHS steel up to 120mm x 120mm • Offers an accurate, fast & clean cold cut • 3HP, 240V motor • 90° - 45° swivel vice • Supplied with T.C.T. mild steel blade

• Italian made quality • Non-ferrous metal cutting saw (aluminium, copper, brass etc.) • Swivel head 45° right & left • Mitre head 45° left • Trigger switch operation • Double vice • 3HP, 415V motor • Single speed 3000rpm • Fully recirculating coolant system • Round cutting capacity 90° : 140mm 45° : 130mm • Blade not included

S14 2

$675.00

TA400-3

1 speed (WP275DS-1) or 2 speed (WP275DS-3)

2HP, 415V

$4025.00

400mm FRICTION SAW • Italian made quality • Swivel head 45° left & right • Trigger switch operation • Quick locking vice • 7.4HP, 415V, single speed 3800rpm • Round cutting capacity 90° : 130mm 45° : 120mm

TV400-3

$2899.00

FREIGHT CHARGES MAY APPLY. PRICES INCLUDE GST

315mm SEMI-AUTO VERTICAL COLDSAW • Italian made quality • Semi automatic operation • Swivel head 45° left & 60° right • Trigger switch operation • 2.5HP, 415V • 2 Speed • Includes blade and stand • Round cutting capacity 90° : 70mm 45° : 70mm

NTS315-3

$9525.00

MACC METAL CUTTING SAWS

HIGH QUALITY ITALIAN MADE MACHINES WITH 40 YEARS IN THE SAW MANUFACTURING INDUSTRY

View the whole range at

www.maccmachinery.com.au

Part No.

MB-280CSO • Swivel head 0° to 60° • Hydraulic down feed

Features

MB-320CSO

MB-330CSO

MB-330MS

• Swivel head 0° to 60° • Hydraulic down feed

• 2 way swivel head 0° to 60° • Hydraulic down feed

• 2 way swivel head 0° to 60° • Semi automatic operation

Motor

1.5HP, 240V (280CSO-1) or 1.5HP, 415V (280CSO-3)

1.5HP, 240V (320CSO-1) or 1.5HP, 415V (320CSO-3)

1.5HP, 240V (330CSO-1) or 1.5HP, 415V (330CSO-3)

1.5HP, 415V

Gearbox

Single Speed (280CSO-1) or 2 Speed (280CSO-3)

Single speed (320CSO-1) or 2 Speed (320CSO-3)

Single speed (330CSO-1) or 2 Speed (330CSO-3)

2 speed

Round Cutting Capacity

90° : 220mm 45° : 160mm

90° : 230mm 45° : 200mm

90° : 260mm 45°(R) : 225mm

Rectangular Capacity

90° : 250mm x 155mm 45° : 160mm x 110mm

90° : 300mm x 170mm 45° : 230mm x 180mm

90° : 330mm x 220mm 45°(R) : 225mm x 160mm

Price

$4895.00 (280CSO-1) $5095.00 (280CSO-3)

$7375.00 (320CSO-1) $7145.00 (320CSO-3)

$7755.00 (330CSO-1) $8415.00 (330CSO-3)

$10995.00

Part No.

MB-411CSO-3

MB-411MS-3

Features

• 2 way swivel head 0° to 60° • Hydraulic down feed

• 2 way swivel head 0° to 60° • Semi auto operation

Motor

2HP, 415V

Gearbox

2 speed

MB-420DI-3

MB-650DI-3

MB-380A-3

• 2 way swivel head 0° to 60° • Semi auto operation

• Full auto CNC controlled machine • Swivel head 0° to 60° • Digital control of quantity length

2HP, 415V

2.95HP, 415V

2.15HP, 415V

2 speed

Variable speed

2 speed

Round Cutting Capacity

90° : 300mm 45°(R) : 240mm 45°(L) : 180mm

90° : 400mm 45° (L & R) : 400mm

90° : 450mm 45° (L & R) : 450mm

90° : 290mm 45°(R) : 265mm

Rectangular Capacity

90° : 400mm x 200mm 45°(R) : 240mm x 130mm

90° : 550mm x 400mm 45°(R) : 410mm x 300mm

90° : 620mm x 450mm 45°(R) : 450mm x 400mm

90° : 320mm x 290mm 45° : 220mm x 220mm

Price

$10615.00

$13255.00

$20125.00

$23645.00

$22610.00

Part No.

NEW250DV

TRS300

TRS315EDV

NEW350E-3

NEW350EDV-3

NEW350S-3

Blade Size

250mm

300mm

315mm

350mm

Features

• Swivel head 45° left & right • Double vice

• Swivel head 45° left & right

• Swivel head 45° left & right • Double vice

• Swivel head 45° left & right

• Swivel head 45° left & right • Double vice

• Semi auto operation

Motor

1.2HP, 240V (NEW250DV-1) or 1.75HP, 415V (NEW250DV-3)

2HP, 240V (TRS300-1) or 3HP, 415V (TRS300-3)

2HP, 240V (TRS315EDV-1) or 3HP, 415V (TRS315EDV-3)

3.2HP, 415V

Gearbox

Single Speed (NEW250DV-1) or 2 Speed (NEW250DV-3)

Single Speed (TRS300-1) or 2 Speed (TRS300-3)

Single Speed (TRS315EDV-1) or 2 Speed (TRS315EDV-3)

2 speed

90° : 90mm 45° : 80mm

90° : 110mm 45° : 90mm

90° : 110mm 45° : 80mm

$3575.00 (TRS315EDV-1) $4389.00 $3575.00 (TRS315EDV-3)

$4895.00

$9925.00

Round Cutting Capacity

90° : 70mm 45° : 65mm

Price

$1925.00 (NEW250DV-1) $2195.00 (TRS300-1) $1815.00 (NEW250DV-3) $2195.00 (TRS300-3)

90° : 90mm 45° : 90mm

FREIGHT CHARGES MAY APPLY. PRICES INCLUDE GST

• Swivel head 45° L & R • Double vice

VIEW THE FULL RANGE OF 20 AUSTRALIAN STOCKED MODELS AT

HOLEMAKER PRO 35 AUTO

WWW.HOLEMAKER.COM

AUTOMATIC FEED MACHINE • Capacity (diameter) 35mm • Capacity (depth) 52mm • Smart control systems for excellent performance and operator’s safety • 12.5kg • European made

HMPRO35AUTO

MAGNETIC BASE DRILLING MACHINES

CUTTING TOOLS

$2375.00

HOLEMAKER PRO 40 VERSATILE MACHINE • Capacity (diameter) 40mm • Capacity (depth) 52mm • Optional 13mm twist drill chuck • Through cutter coolant system • 12.5kg • European made

HMPRO40

$1495.00

HOLEMAKER PRO 50 #2 MORSE TAPER • Capacity (diameter) 52mm • Capacity (depth) 52mm • #2 Morse taper spindle • Powerful 1260W motor & 2 spd gearbox • 16.5kg • European made

HMPRO50

$2225.00

HOLEMAKER PRO 35 QUALITY, COMPACT & ROBUST EUROPEAN MADE MACHINE • Capacity (diameter) 35mm • Capacity (depth) 52mm • Lightweight, only 10kg! Ideal for onsite & overhead tasks • Through cutter coolant system with magnetically attached coolant bottle • Dual rail slide system • Comes complete in plastic carry case

HMPRO35

$1025.00

HOLEMAKER PRO 50D

HOLEMAKER PRO 75

HOLEMAKER PRO 110

75mm DEPTH CAPACITY

#3 MORSE TAPER

• Capacity (diameter) 52mm • #2 Morse taper spindle • Powerful 1260W motor & 2 spd gearbox • 16.5kg • European made

• Capacity (diameter) 75mm • Capacity (depth) 75mm (110mm optional) • 32mm #3MT drill bit capacity • 2 spd gearbox with variable speed 80 to 160rpm; 210 to 420rpm • 1650W motor output with soft start • European made

LARGE CAPACITY HEAVY DUTY MACHINE

$2325.00

HMPRO50D

HOLEMAKER PRO 36 AD

ULTRA LOW PROFILE MACHINE • Constant working height of 176mm • Quality European made machine • Capacity (diameter) 36mm • Capacity (depth) 30mm • 9.5kg

HMPRO36AD

$2050

.00

HOLEMAKER ANNULAR CUTTER SHARPENER

• 1200w, 240v motor 2800rpm • 125mm diamond wheel • 12 - 52mm diameter cutter capacity

HMCS100-2 4

$3275.00

HMPRO75

$3300.00

HOLEMAKER 35 PNEUMATIC PNEUMATIC POWERED ANGLE DRIVE MACHINE

• Capacity (diameter) 35mm • European made • Capacity (depth) 25mm • Constant working height of 183mm • Motor certified ATEX II2G/D C IIC T6; T4 motor for areas with risk of explosion • Fully ATEX model also avilable

HMP35AD

$6700.00

HMPRO110

• Available in 1mm increments from 12 to 52mm diameter • Titanium nitride coating • M2AL high speed steel material • Step hardened process AVAILABLE IN SIZES: • Multi-cut geometry • Fully ground with internal relief • 12 - 60mm diameter • 25 to 75mm depth • Universal shank of cut Part No. Diameter Depth Price AT2025 20mm 25mm $51.00 AT2225 22mm 25mm $58.50 AT2425 24mm 25mm $63.50

FREIGHT CHARGES MAY APPLY. PRICES INCLUDE GST

$4025.00

HOLEMAKER 45 PNEUMATIC #2 MORSE TAPER, PNEUMATIC POWERED MACHINE

• Capacity (diameter) 45mm • Capacity (depth) 52mm • 23mm #2MT drill bit capacity • 2 speed 190 / 290rpm • Motor certified ATEX II2G/D C IIC T6; T4 motor for areas with risk of explosion • European made

HMP45

HOLEMAKER GOLD SERIES ANNULAR CUTTERS

Part No. Diameter Depth Price AT1225 12mm 25mm $42.50 AT1425 14mm 25mm $43.50 AT1625 16mm 25mm $47.00 AT1825 18mm 25mm $48.50

• Capacity (diameter) 110mm • Capacity (depth) 75mm (110mm with optional arbor) • 4 speed mechanical gearbox • 1650W motor output • European made

$7950.00

HOLEMAKER MAXI-CUT TCT ANNULAR CUTTERS As well as providing excellent life in mild steel, Tungsten Carbide Tipped Cutters are suitable for drilling difficult materials eg. stainless steel, Bisalloy and wear plate. AVAILABLE IN SIZES: • 12 - 90mm in 1mm increments • Available up to 150mm diameter • Available in 35, 50, 75, 100 & 150mm depth of cut Part No. Diameter Depth MAX50-18 18mm 50mm MAX50-22 22mm 50mm MAX50-32 32mm 50mm MAX50-50 50mm 50mm MAX50-60A 60mm 50mm

Price $100.00 $105.00 $150.00 $200.00 $220.00

Bench & Pedestal Drills

BELT DRIVE BENCH & PEDESTAL DRILLS Features • Quality casting, construction & componentry • Emergency stop NVR safety switch Each unit supplied with : • Chuck safety guard • Drill chuck & arbor • Drill drift (on MT models)

Part No.

TD1013

TD1316

TD1316F

TD1420F

TD1825F

TD2032F

Type

Bench Drill

Pedestal Drill

Capacity

13mm

16mm

20mm

25mm

32mm

Chuck

13mm B16

16mm B16

20mm B22

Spindle

#2MT

#3MT

#4MT

Motor

1/2HP, 240V

3/4HP, 240V

1HP, 240V

2HP, 240V

Gearbox

5 speed

16 speed

12 speed

Height

680mm

980mm

1580mm

1600mm

1710mm

Weight

27kg

50kg

60kg

80kg

120kg

145kg

Price

$275.00

$430.00

$515.00

$765.00

$1125.00

$1275.00

EXTRA HEAVY DUTY INDUSTRIAL BELT DRIVE BENCH & PEDESTAL DRILLS Quality Taiwanese machines with heavy duty casting and construction for proven lasting durability in industrial workshops Each unit supplied with : • Drill chuck & arbor • Drill drift

GEARED HEAD DRILLING MACHINE

Quality precision machine for drilling & tapping • # 4 Morse taper spindle • Micro feed precision • Geared head tilts 90° right & left • Forward and reverse operation • Accessories include arbor, drill chuck, drill sleeves

SPECIFICATIONS • 40mm capacity • 1.5HP motor, 6 speed gearbox • 1770mm height, 320kg

TGD400-1 • 240V

TGD400-3 • 415V

$2849.00 $2849.00 TGD400

GEARED HEAD DRILLING & MILLING MACHINE K1720HD

• 23mm capacity • 16mm #3 JT chuck • #2 MT Spindle • 1HP, 240V motor • 12 speed • 1010mm height, 72kg

K1720HFD

$980.00

FOOT CONTROL SAFETY SWITCH

• 23mm capacity • 16mm #3 JT chuck • #2 MT Spindle • 1HP, 240V motor • 12 speed • 1600mm height, 78kg

$1029.00

• Aluminium body • Cable not supplied • Suitable for 240V • 415V option also available • M20 cable entry

FS502

$255

.00

K2532

• 32mm capacity • 16mm #3 JT chuck • #3 MT Spindle • 1.2HP, 240V motor • 12 speed • 1752mm height, 158kg

$1750.00

All the features of the TGD400 combined with : • Milling table • Recirculating coolant system

TGMD400-1 • 240V

TGMD400-3 • 415V

$2999.00 $2999.00 AUTO FEED GEARED HEAD DRILLING & MILLING MACHINE

All the features of the TGMD400 combined with Automatic Feed

• 415V

TGMD400A-3

$3355

FREIGHT CHARGES MAY APPLY. PRICES INCLUDE GST

TGMD400

.00 5

Clamps

C CLAMPS

FORGED STEEL C CLAMPS

• Cast iron construction • Swivel Pad

Part No. TC-C075 TC-C100 TC-C150 TC-C200 TC-C250 TC-C300

Span 75mm 100mm 150mm 200mm 250mm 300mm

Depth 100mm 100mm 100mm 100mm 100mm 100mm

• Manufactured by Ehoma • Hardened Acme spindle • Swivel pad ensures even pressure is applied on angular workpieces • Tempered & hot forged steel • Nickel & chrome plating

Price $8.10 $11.00 $14.50 $18.00 $23.00 $27.50

Part No. EC-BC4 EC-BC5 EC-BC6 EC-BC8 EC-BC10 EC-BC12

F SCREW CLAMPS • Malleable cast jaws for strength and durability • Serrated slip resistant profiled rail • Rubber grip handle • Removable soft pads

Part No. TC-F200120 TC-F200120 TC-F300120 TC-F400120 TC-F500120 TC-F600120 TC-F800120

Span x Depth 200x120mm 250x120mm 300x120mm 400x120mm 500x120mm 600x120mm 800x120mm

Price $17.00 $18.50 $19.00 $20.50 $25.50 $29.00 $29.50

Span x Depth Clamping Force Price 100x50mm 900kg $48.00 125x65mm 850kg $51.00 150x75mm 1000kg $59.50 200x100mm 1000kg $74.50 250x115mm 1200kg $93.50 300x125mm 1500kg $120.00

DEEP THROAT FORGED STEEL C CLAMPS Features as per Forged Steel C Clamp, with increased depth capacity

Part No. EC-UC4 EC-UC5 EC-UC6 EC-UC8 EC-UC10

Span x Depth Clamping Force 100x160mm 650kg 125x200mm 700kg 150x250mm 800kg 200x350mm 850kg 250x400mm 1000kg

Price $75.00 $100.00 $130.00 $195.00 $255.00

GENERAL PURPOSE FORGED STEEL CLAMPS

QUICK ACTION FORGED STEEL CLAMPS

• Manufactured by Ehoma • For general purpose clamping applications • Swivel pad ensures even pressure is applied on angular workpieces Up to 1500mm span available

• Manufactured by Ehoma • Ratchet type lever prevents overloading & resists vibration. • For high pressure, fast action clamping purposes.

Part No. EC-G16CS EC-G20CS EC-G25CS EC-G30CS EC-G40CS EC-G60CS EC-G80CS

Span x Depth Clamping Force Price 160x80mm 300kg $34.00 200x100mm 450kg $43.50 250x120mm 550kg $54.50 300x140mm 670kg $67.50 400x175mm 1000kg $89.00 600x175mm 1000kg $100.00 800x175mm 1000kg $120.00

Part No. Span x Depth Clamping Force Price EC-G16L 160x80mm 300kg $72.00 EC-G20L 200x100mm 350kg $81.50 EC-G30L 300x140mm 500kg $115.00 EC-G40L 400x120mm 550kg $120.00 EC-G50L 500x120mm 550kg $125.00

HEAVY DUTY FORGED STEEL CLAMPS

EXTRA HEAVY DUTY FORGED STEEL CLAMPS

PIVOT HANDLE FORGED STEEL CLAMPS

• Manufactured by Ehoma • Larger rail sizes & acme spindle • For heavy duty applications. • Changeable clamping heads • Socket drive handle

• Manufactured by Ehoma • The comfortable pivot handle makes it easier to achieve maximum clamping pressure & allows faster clamping in restricted working areas

Part No. Span x Depth Clamping Force EC-GS30C 300x140mm 1200kg EC-GS40C 400x120mm 1200kg EC-GS50C 500x140mm 1200kg EC-GS60C 600x120mm 1200kg

Price $125.00 $135.00 $145.00 $155.00

Up to 1000mm span available

BEAM FORGED STEEL CLAMPS • Manufactured by Ehoma • U-Turn design is ideal for clamping H beam when welding • Changeable clamping heads • Socket drive handle

Part No. EC-H30U11 EC-H50U11 EC-H30U15 EC-H40U15 EC-H50U15

Span x Depth Clamping Force 300x140mm 1100kg 500x140mm 1100kg 300x175mm 2200kg 400x175mm 2200kg 500x175mm 2200kg

Price $170.00 $185.00 $290.00 $310.00 $320.00

Part No. Span x Depth Clamping Force EC-SS30C 300x175mm 2200kg EC-SS40C 400x175mm 2200kg EC-SS50C 500x175mm 2200kg EC-SS60C 600x175mm 2200kg

Price $210.00 $225.00 $240.00 $250.00

Up to 1500mm span available

Part No. EC-REG20C EC-REG30C EC-REG40C EC-REG60C

Span x Depth Clamping Force Price 200x100mm 670kg $53.00 300x140mm 670kg $76.50 400x175mm 700kg $97.50 600x175mm 700kg $115.00

CLEARANCE SPECIAL CLEARANCE SPECIAL WHILE STOCKS LAST WHILE STOCKS LAST QUICK GEAR CLAMP

CAST ALLOY BAR CLAMPS MULTI FUNCTION

• Quick gear clamping & releasing mechanism • Removable pads • 80mmm depth • 300mm span

• Cast alloy construction • 400KG clamping pressure • Head can be reversed to create a spreader • Removable soft pads • Spring loaded pressure jaw

Regular price $61.60

TC-QG12

$33.00 FREIGHT CHARGES MAY APPLY. PRICES INCLUDE GST

Part No.

Span x Depth

EC-TC-6A EC-TC-12A EC-TC-18A EC-TC-24A

150x85mm 300x85mm 450x85mm 600x85mm

Spreading Clamping Price Capacity Force 170x365mm 400kg $36.50 170x515mm 400kg $39.00 170x655mm 400kg $41.50 170x815mm 400kg $45.00

DRILL DOCTOR 500X DRILL BIT SHARPENER • Tradesman model • 2.5mm to 13mm drill bit capacity • 118° or 135° sharpening angle • Creates & sharpens split point bits • 3 year warranty

DD500X

$425.00

DRILL DOCTOR 750X DRILL BIT SHARPENER

DRILL DOCTOR 360X

• Top of the line tradesman model • 2.5mm to 19mm drill bit capacity • 115° to 140° sharpening angle • Creates & sharpens split point bits • 3 year warranty

DRILL BIT SHARPENER • Handyman model • 2.5mm to 13mm drill bit capacity • 240V motor • 1 year warranty • 118° sharpening angle

DD360X

SAVE TIME AND MONEY WITH DRILL DOCTOR, BRING THOSE OLD BITS BACK TO LIFE! www.drilldoctor.com.au

$240.00

DAREX V391 DRILL BIT SHARPENER • 3mm - 19mm drill capacity • Custom point angles 118° - 140° • Standard and split point styles • 1/4hp, 240V motor • Solid steel construction • 11kg weight

V391

$2195.00

DD750X

$529.00

DAREX XT3000I

DAREX E90I

• Sharpens standard, and split point HSS & Cobalt drills • Large range of attachments available to sharpen a range of cutting tools • Emerson 1/4hp motor - 3450 rpm • 118° - 150° point angles • 3 - 21mm diameter drill capacity

END MILL GRINDER & SHARPENER

XT3000I

$6560.00

• Sharpens 2, 3, 4, & 6 flute end mills / slot drills • Grinding capacity : 1.5mm to 52mm flute diameter, 1.5mm to 26mm shank diameter • Max flute length : 156mm • 240v,1/4hp motor, 3450rpm

E90I

$6195.00

KNIFE & TOOL SHARPENERS KNIFE & TOOL SHARPENER

KEN ONION EDITION - KNIFE & TOOL SHARPENER • The 3/4" x 12" premium, flexible engineered abrasive belts sharpen virtually any shape or type of knife • The sharpening guide is fully adjustable in 1° increments from 15° to 30° • Variable speed control 6000 to 14000rpm

• 240V Electric knife sharpener • Very fast & easy to use • Flexible abrasive sharpening belts create a superior convex grind on the blade. The edge is stronger, cuts better and stays sharper longer! • Precision guides: 2 x 25° Outdoor knife guides & 2 x 20° Kitchen knife guides for precise repeatable results • Includes 3 abrasive belts

WSKTS-I

Sharpens pocket and hunting knives, serrated knives, kitchen knives and any other shape or type of blade you own

$215.00

WSKTS-KO

GUIDED FIELD SHARPENER 2.2.1

GUIDED SHARPENER

5 STAGE SHARPENER WITH BUILT IN ANGLE GUIDES • Ceramic rod, diamond plate & leather strop all built in to 1 sharpener • 20° & 25° angle guides

Complete sharpening solution for every knife you own

Sharpens: • Standard Knives • Serrated Knives • Scissors • Broad Heads • Fish Hooks • Axes & Machetes • And So Much More!

WSGFS221

$59.00

FREIGHT CHARGES MAY APPLY. PRICES INCLUDE GST

$399.00

• 17° & 20° angle guides • Interchangeable 320 grit coarse and 600 grit fine 6" diamond plates • Angle-guided field hone with a three-position ceramic rod (coarse, fine, fish hook groove), and two small diameter ceramic rods for serrations

WSGSS

$109.00 7

Cutting Tools GENERAL ENGINEERING HOLESAW SET

JOBBER DRILLS - CARDED • M2 High speed steel • Split point • 118° Point angle Part No.

Diameter

Price

UN304-010 UN304-015 UN304-020 UN304-025 UN304-030 UN304-035 UN304-040 UN304-045 UN304-050 UN304-055 UN304-060 UN304-065 UN304-070 UN304-075 UN304-080 UN304-085 UN304-090 UN304-095 UN304-100 UN304-105 UN304-110 UN304-115 UN304-120 UN304-125 UN304-130

1mm 1.5mm 2mm 2.5mm 3mm 3.4mm 4mm 4.5mm 5mm 5.5mm 6mm 6.5mm 7mm 7.5mm 8mm 8.5mm 9mm 9.5mm 10mm 10.5mm 11mm 11.5mm 12mm 12.5mm 13mm

$6.00 $5.50 $5.00 $5.00 $4.70 $2.80 $3.20 $3.50 $4.10 $4.70 $5.30 $5.90 $6.80 $7.60 $8.20 $9.20 $10.00 $11.00 $12.00 $13.50 $15.50 $17.00 $19.50 $21.50 $23.00

Qty Per Pack 2pk 2pk 2pk 2pk 2pk

Part No.

Diameter

Price

UN306-062 UN306-078 UN306-093 UN306-109 UN306-125 UN306-140 UN306-156 UN306-171 UN306-187 UN306-203 UN306-218 UN306-234 UN306-250 UN306-265 UN306-281 UN306-296 UN306-312 UN306-328 UN306-343 UN306-359 UN306-375 UN306-390 UN306-406 UN306-421 UN306-437 UN306-453 UN306-468 UN306-484 UN306-500

1/16" 5/64" 3/32" 7/64" 1/8" 9/64" 5/32" 11/64" 3/16" 13/64" 7/32" 15/64" 1/4" 17/64" 9/32" 19/64" 5/16" 21/64" 11/32" 23/64" 3/8" 5/64" 13/32" 27/64" 7/16" 29/64" 15/32" 31/64" 1/2"

$5.20 $5.00 $5.00 $4.60 $4.70 $2.90 $3.20 $3.50 $3.90 $4.30 $4.70 $5.10 $5.70 $6.30 $7.00 $7.60 $8.20 $8.80 $9.70 $10.50 $11.00 $12.00 $13.00 $14.50 $15.50 $17.50 $19.50 $20.50 $21.50

Qty Per Pack 2pk 2pk 2pk 2pk 2pk

UN108-100

4.5mm DEPTH OF CUT • Available from 14mm to 120mm • Suitable for drilling steel, stainless steel, aluminium, FRP, PVC, plastics & fibreglass. Part No. Diameter Depth of Cut MCS16 16mm 4.5mm MCS20 20mm 4.5mm MCS22 22mm 4.5mm MCS25 25mm 4.5mm MCS32 32mm 4.5mm MCS40 40mm 4.5mm MCS50 50mm 4.5mm

Price

UN300-010 UN300-015 UN300-020 UN300-025 UN300-030 UN300-032 UN300-035 UN300-040 UN300-045 UN300-048 UN300-050 UN300-055 UN300-058 UN300-060 UN300-065 UN300-070 UN300-075 UN300-080 UN300-085 UN300-090 UN300-095 UN300-100 UN300-105 UN300-110 UN300-115 UN300-120 UN300-125 UN300-130

1mm 1.5mm 2mm 2.5mm 3mm 3.2mm 3.5mm 4mm 4.5mm 4.8mm 5mm 5.5mm 5.8mm 6mm 6.5mm 7mm 7.5mm 8mm 8.5mm 9mm 9.5mm 10mm 10.5mm 11mm 11.5mm 12mm 12.5mm 13mm

$1.20 $1.30 $1.40 $1.50 $1.50 $1.80 $1.90 $2.10 $2.80 $3.10 $3.20 $3.60 $3.60 $4.20 $4.80 $5.90 $6.50 $7.60 $8.40 $9.20 $10.00 $11.50 $12.50 $14.00 $15.00 $17.00 $18.50 $20.50

Qty Per Pack 10pk 10pk 10pk 10pk 10pk 10pk 10pk 10pk 10pk 10pk 10pk 10pk 10pk 10pk 10pk 10pk 10pk 5pk 5pk 5pk 5pk 5pk 5pk 5pk 5pk 5pk 5pk 5pk

* price per each drill bit

Part No.

Diameter

Price

UN302-062 UN302-078 UN302-093 UN302-109 UN302-125 UN302-140 UN302-156 UN302-171 UN302-187 UN302-203 UN302-218 UN302-234 UN302-250 UN302-265 UN302-281 UN302-296 UN302-312 UN302-328 UN302-343 UN302-359 UN302-375 UN302-390 UN302-406 UN302-421 UN302-437 UN302-453 UN302-468 UN302-484 UN302-500

1/16" 5/64" 3/32" 7/64" 1/8" 9/64" 5/32" 11/64" 3/16" 13/64" 7/32" 15/64" 1/4" 17/64" 9/32" 19/64" 5/16" 21/64" 11/32" 23/64" 3/8" 5/64" 13/32" 27/64" 7/16" 29/64" 15/32" 31/64" 1/2"

$1.60 $1.80 $1.90 $2.00 $2.20 $2.40 $2.80 $3.20 $3.50 $3.90 $4.20 $4.60 $5.20 $5.90 $6.60 $7.20 $7.80 $8.40 $9.20 $10.00 $10.50 $11.50 $12.50 $14.00 $15.00 $17.00 $19.00 $20.00 $21.00

JOBBER DRILL SETS 19 PCE METRIC SET • 1.0mm to 10.0mm • 0.5mm rises

$86.50

25 PCE METRIC SET

UN308-120

• 1.0mm to 13.0mm • 0.5mm rises

$170.00

21 PCE IMPERIAL SET

UN308-340

• 1/16" to 3/8" • 1/64" rises

$88.00

29 PCE IMPERIAL SET

UN308-360

• 1/16" to 1/2" • 1/64” rises 8

Qty Per Pack 10pk 10pk 10pk 10pk 10pk 10pk 10pk 10pk 10pk 10pk 10pk 10pk 10pk 10pk 10pk 10pk 5pk 5pk 5pk 5pk 5pk 5pk 5pk 5pk 5pk 5pk 5pk 5pk 5pk

25mm DEPTH OF CUT • Available from 14mm to 120mm • Suitable for drilling steel plate, stainless steel, A.C. sheeting, aluminium, FRP, PVC, fibreglass & concrete coated pipes Part No. Diameter Depth of Cut Price MCTR16 16mm 25mm $70.00 MCTR20 20mm 25mm $70.00 MCTR22 22mm 25mm $70.00 MCTR25 25mm 25mm $70.00 MCTR32 32mm 25mm $90.00 MCTR40 40mm 25mm $100.00 MCTR50 50mm 25mm $110.00

T.C.T. HOLESAW SETS 4.5mm DEPTH OF CUT Includes 6 holesaws • 16, 20, 22, 25, 32, 40mm diameter

MCS-SET1

$309.00 25mm DEPTH OF CUT Includes 6 holesaws • 16, 20, 22, 25, 32, 40mm diameter

MCTR-SET1

UN308-110

$190

.00

Price $47.00 $47.00 $53.00 $53.00 $60.00 $67.00 $79.00

T.C.T. HOLESAWS

• M2 High speed steel • Split point • 118° Point angle Diameter

$145.00

T.C.T. HOLESAWS

JOBBER DRILLS - BULK Part No.

Set includes: • 16, 19, 22, 25, 32, 35, 38, 44, 51, 57, 64, 76mm holesaws • 11/32" & 7/16" arbors • Arbor extension • 12" extension bar

• M2 High speed steel • Split point • 118° Point angle

$420.00

35mm DEPTH OF CUT Includes 6 holesaws • 20, 22, 25, 32, 40, 50mm diameter

MCTN-SET2

$550.00 FREIGHT CHARGES MAY APPLY. PRICES INCLUDE GST

Cutting Tools 3/8" CARBIDE BURR SET

CARBIDE BURRS DOUBLE CUT

CYLINDRICAL SQUARE END

CYLINDRICAL END CUT

CYLINDRICAL RADIUS END

BALL SHAPE

TREE SHAPE POINTED END

TAPERED RADIUS END

Part No. CB-SA1 CB-SA3 CB-SA5 CB-SA6

Set includes: • Cylindrical End Cut • Cylindrical Radius End • Ball Shape • Tree Shape Radius End • Cylindrical Aluminium Cut

CB-SET-01

Full range of carbide burrs available at great prices!

Part No. CB-SD1 CB-SD3 CB-SD5 CB-SD6

$115.00

Size 1/4" 3/8" 1/2" 5/8"

Price $21.00 $28.50 $43.00 $76.00

Part No. CB-SB1 CB-SB3 CB-SB5 CB-SB6

Price $20.00 $25.00 $32.50 $41.00

Size 1/4" 3/8" 1/2" 5/8"

Part No. CB-SG1 CB-SG3 CB-SG5 CB-SG6

STEP DRILLS

Size 1/4" 3/8" 1/2" 5/8"

Price $22.00 $29.00 $44.50 $82.50

Price $23.00 $29.50 $43.00 $62.50

STEP DRILL SETS

SPIRAL FLUTE

STRAIGHT FLUTE

• Titanium Nitride Coated

Part No. CB-SC1 CB-SC3 CB-SC5 CB-SC6

Part No. CB-SL1 CB-SL3 CB-SL4 CB-SL6

Size 1/4" 3/8" 1/2" 5/8"

Price $23.00 $29.50 $46.50 $69.50

Price $23.00 $37.00 $49.00 $71.50

SPIRAL FLUTE

STRAIGHT FLUTE

• 4 to 20mm • 5 to 25mm • 6 to 30mm

• 4 to 12mm • 5 to 25mm • 6 to 30mm

FROM

$30.00

FROM

$32.00

Part No. SDST4-12MM SDST4-20MM SDST5-25MM SDST6-30MM

Part No. Sizes Inc. Price SD4-20MM 4 to 20mm $32.00 SD5-25MM 5 to 25mm $50.00 SD6-30MM 6 to 30mm $88.00

Sizes Inc. 4 to 12mm 4 to 20mm 5 to 25mm 6 to 30mm

Price $30.00 $32.50 $50.00 $89.00

SDSET-1

$185.00

COUNTERSINK SETS

SDSTSET-1

$155.00

COUNTERSINK SET

3 FLUTE 90° HIGH SPEED STEEL

3mm TO 20.5mm SET

CROSS HOLE

3mm TO 20.5mm SET

3mm TO 25mm SET

• 3 to 8.4mm • 3 to 12.4mm • 3 to 20.5mm

• 3 to 10.4mm • 3 to 16.5mm • 3 to 25mm

• 3 to 6.4mm • 3 to 8.4mm • 3 to 10.4mm • 3 to 12.4mm • 3 to 16.5mm • 3 to 20.5mm

Includes 5 Countersinks • 2 to 5mm • 5 to 10mm • 10 to 15mm • 15 to 20mm • 20 to 25mm

STSET-05

$47.00

STSET-03

HAND HELD COUNTERSINKS

STSET-01

$102.00

ANNULAR CUTTER SETS GOLD SERIES

• 1/4" hex drive • 90° angle Multiple head mounting options

SHC-12 12.4MM

$65.00

SHC-25 25MM

$27.00 $47.00

• Titanium nitride coating • Step hardened process • M2AL high speed steel material • Multi-cut geometry • Fully ground with internal relief • Universal shank

ATSET-A

ATSET-B

$270.00

$485.00

SWSET-05

SHEET METAL CUTTER SET • High speed steel cutters offering speed, long life, precision & accuracy • 8, 10, 12, 14, 16, 18, 20mm Diameters • Set Includes Arbor, Pilot pin, Hex key, Centre punch, Small & large washers • Supplied in plastic carry case

• 14, 16, 18, 20, • 12, 13, 14, 16, 17, 18, 20, 22mm diameter 22, 24, 26mm diameter • 25mm depth of cut • 25mm depth of cut

FREIGHT CHARGES MAY APPLY. PRICES INCLUDE GST

$265.00

HSMC-SET

$155.00

TO VIEW THE FULL RANGE OF TRADEMASTER VENTILATORS VISIT: WWW.TRADEMASTERTOOLS.COM

PORTABLE VENTILATOR SETS

• Suitable for air/fume extraction or blowing fresh air • Large capacity motor creating a very high flow rate • Ideal ventilation for workshops and confined areas • Specially designed axial propeller • High static pressure • Includes 5 metre expandable ducting

TPV200SET

TPV300SET

TPV400SET

TPV500SET

$205.00

$235.00

$719.00

$879.00

• 300mm • 550W Motor • 60m³/min Flow Rate

• 200mm • 150W Motor • 25m³/min Flow Rate

TPV600SET

75mm BELT GRINDER

150mm BELT GRINDER

• Made in Denmark • 3KW 415V motor • 75 x 2000mm belt • Smooth, low vibration high output operation • 2860rpm belt speed • Precise belt tracking adjustment • Safety stop switch

• Made in Denmark • 3.6KW 415V motor • 150 x 2000mm belt • Smooth, low vibration high output operation • 2860rpm belt speed • Precise belt tracking adjustment • Safety stop switch

INDUSTRIAL WORKSHOP FANS • Quality robust construction designed for everyday use in industrial workshops • Zinc coated mesh • Powder coated steel frame • 240V 3 speed motor • Oscillating function

GRIMAX

$2950.00

TWF30

PLATE & PIPE BEVELLING MACHINE

• Newly designed milling head arrangement which is fast and easy to set up • Single milling head with 10 square inserts • 15 to 60° working range • 1600W induction motor • 3340rpm • 21mm maximum bevel width • 20.5kg THE DEMO

• Single milling head with 10 square inserts • Low vibration model • 0 to 60° working range • Universal guide system bevels plate & pipe Ø150 - 300mm • 1600W induction motor • 2800rpm • 21mm maximum bevel width E D E MO • 21kg TH

PRO 10 PB

E TH

DE M

BM21

$3095.00 $155.00

.com emaste

E TH

PRO10PBA

$11405.00

ABM14

$9825.00

FREIGHT CHARGES MAY APPLY. PRICES INCLUDE GST

DE M

O AT

$6930.00

$175.00

• Mill plates and pipes made of mild steel, alloy steel, stainless steel or aluminum alloys • Auto feed on large plates with optional trolley • Max bevel speed : 2.6 m/min • Maximum bevel width is 14 mm • Low noise : 70dB • Minimum pipe ID : 100mm • Weight : 65kg • Motor : 2200W

.tr ad

PRO10PBE

750mm (30") 290m³/min Flow Rate

PLATE & PIPE BEVELLING MACHINE

VIEW

.tr ad

TPF30

ABM14 BEVELLER

oo ls

• Pneumatic motor (PRO 10 PBA) or high torque electric motor (PRO 10 PBE) available • Standard pipe machining range 84mm to 269mm I.D. 38mm to 392mm I.D. with optional accessories • Maximum wall thickness 20mm • Simultaneously perform 3 of the following operations internal bevel, external bevel, J-groove bevel, face off, I.D. chamfer and counterbore

emaste

• Quality robust construction designed for everyday use in industrial workshops • Zinc coated mesh • Powder coated steel frame • 240V 3 speed motor • Oscillating function

600mm (24") 185m³/min Flow Rate

VIEW

PORTABLE PIPE BEVELLER

oo ls

.tr ad

PEDESTAL FANS

TPF24

.com

oo ls

$2325.00

BM20+

VIEW

BM21 BEVELLER

PLATE & PIPE BEVELLING MACHINE

VIEW

BM20 PLUS BEVELLER

emaste

$155.00

750mm (30") 290m³/min Flow Rate

.com

GRIMAX150

oo ls

$1875.00

.tr ad

$1200.00 WALL MOUNT FAN

GRIMAX

GRIMAX75

• 600mm • 2200W Motor • 290m³/min Flow Rate

• 500mm • 1500W Motor • 138m³/min Flow Rate

• 400mm • 1500W Motor • 128m³/min Flow Rate

r emaste

Ratchet Wrenches MINI RATCHET WRENCHES

RATCHET WRENCHES

Max torque at 5 seconds : 22 ft-lb Net weight : 0.5kg Overall length : 125mm

Max torque at 5 seconds : 60 ft-lb Net weight : 1.22kg Overall length : 265mm

M7-NE251R

M7-NE332

1/4" drive

M7-NE351R 3/8" drive

RATCHET WRENCHES Net weight : 1.3kg Overall length : 280mm

M7-NE343

M7-NE443

$215.00

• 3/8" drive • Max torque at 5 seconds : 75 ft-lb

M7-NE432

$160.00 $170.00

$160.00 $165.00

$210.00

MINI RATCHET WRENCH

3/8" DRIVE AIR RATCHET WRENCH SET

1/2" DRIVE AIR RATCHET WRENCH KIT THRU HOLE TYPE

Max torque at 5 seconds : 37 ft-lb Net weight : 0.5kg Overall length : 160mm • 3/8" drive • Rear exhaust design to reduce flying dust • Dual-use square drive for 1/4" hex shank screwdriver bits • Narrow design for reaching tight spaces

M7-NE362

$210

1/2" drive

• 1/2" drive • Max torque at 5 seconds : 100 ft-lb

3/8" drive

• 3/8" drive air ratchet wrench • 1/4" drive sockets : 4, 5, 6, 7, 8, 9, 10mm • 3/8" drive socket : 11, 12, 13, 14, 15, 17mm • 40 pcs 1/4" bits • 3/8" extension bar • 1/4" hex shank driver • Plug (adaptor)

.00

M7-NE0357

Angle Drive Impact Wrenches 3/8" ANGLE DRIVE IMPACT WRENCH

$280

Optional imperial thru-hole sockets available

.00

M7-NE0413

1/2" ANGLE DRIVE IMPACT WRENCH

180 FT-LB

MAX TORQUE

Net weight : 1.83kg • Mighty innovative, convenient forward & reverse ring control. • Mighty small, easy to reach narrow spaces.

M7-NE399

M7-NE499

$515.00

Max torque at 5 seconds : 100 ft-lb • Air ratchet wrench • 1/2" hex thru-hole sockets : 8, 9, 10, 12, 13, 14, 17, 19mm • 3" extension bar • 3/8" adaptor for standard sockets • 1/2" adaptor for standard sockets • Plug (adaptor)

250 FT-LB

MAX TORQUE

$515.00

AIR STAPLER

80 Series Capacity : 100 staples Weight : 0.96kg Suitable for : • Upholstery • Insulation • Picture framing • Labelling / wrapping • Furniture manufacturing • Bed & padding manufacturing

90 Series Capacity : 100 staples Weight : 1.10kg Suitable for : • Furniture manufacturing • Kitchen / cabinet manufacture

90 Series Capacity : 100 staples Weight : 2.18kg Suitable for : • Furniture manufacturing • Kitchen / cabinet manufacture

M7-SU8016

$170.00

9.5 - 25mm

Air Saw AIR SAW SET Stroke length : 10mm • Quick change saw blade holder • 5 piece file set and 12 saw blades are included • Adjustable guard / guide controls depth of cut precisely Contents : • 1pc Air saw tool • 6pcs 24T saw blades • 6pcs 32T saw blades • 1pc Allen key: 4mm, 3mm • 5pcs File set • 1pc Mini oiler 1/4"

Air Staplers 6 - 16mm

$455.00

9.5 - 40mm

M7-QD291N

$235.00 BI-METAL AIR SAW BLADES Specially designed blades for use in pneumatic powered saws • 5 blades per pack

M7-SU9025

$180.00

M7-SU9040

$340.00

FREIGHT CHARGES MAY APPLY. PRICES INCLUDE GST

Part No. Dimensions Teeth Per Inch BM-6982 70 x 12.5 x 0.64mm 18 BM-6984 70 x 12.5 x 0.64mm 32 BM-6985 100 x 12.5 x 0.64mm 18 BM-6986 100 x 12.5 x 0.64mm 32 BM-6987 125 x 12.5 x 0.64mm 18

Price $15.50 $15.50 $18.00 $18.00 $21.50 11

3/8" Impact Wrenches

1/4" Impact Wrenches

Part No.

M7-NC2210

M7-NC0208

Part No.

M7-NC3410

M7-NC3810

M7-NC3610Q

M7-NC3812

M7-NC3911

Torque

50 ft/lb

29 ft/lb

Torque

75 ft/lb

350 ft/lb

180 ft/lb

100 ft/lb

Bolt Capacity

3/8" (10mm)

3/8” (10mm)

1/2” (13mm)

3/8” (10mm)

Feature

Mini size

8, 9, 10, 11, 12mm sockets, universal joint, extension bar

Feature

Straight Style

Straight Style 139mm Length

Compact Size 115.5mm Length

Straight Style

Angle Drive

Weight

0.65kg

0.8kg

Weight

0.8kg

0.5kg

1.5kg

1.06kg

1.60kg

Noise

85.0 dBA

91.0 dBA

Noise

92.1 dBA

91.0 dBA

85.0 dBA

97.0 dBA

92.0 dBA

Price

$215.00

$290.00

Price

$150.00

$275.00

$320.00

$355.00

$470.00

1/2" Impact Wrenches

Part No.

M7-NC4610Q

M7-NC4630Q

M7-NC4232Q

M7-NC4255Q

M7-NC4256Q

M7-NC4811

M7-NC4255Q-2

M7-NC4236Q

Torque

500 ft/lb

450 ft/lb

550 ft/lb

1200 ft/lb

1100 ft/lb

210 ft/lb

1000 ft/lb

Bolt Capacity

5/8" (16mm)

1" (25mm)

9/16" (14mm)

1" (25mm)

Feature

115.5mm Length

97mm Length

Lightweight Composite

Composite body

Compact & Powerful

Straight Style

2” Extended Anvil

Heavy Metal Body

Weight

1.6kg

1.5kg

1.35kg

1.7kg

1.8kg

1.7kg

1.8kg

2.62kg

Noise

85.0 dBA

83.0 dBA

85.0 dBA

83.0 dBA

Price

$295.00

$320.00

$340.00

$390.00

$400.00

$405.00

$475.00

Impact Sockets Sets

3/8" DRIVE IMPACT SOCKET SETS

1/2" DRIVE IMPACT SOCKET SETS METRIC

Imperial sets also available

M7-MB34013M STANDARD METRIC

M7-MB35013M DEEP SOCKET METRIC

M7-MB44014M STANDARD METRIC

13 Pce, 6, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm

14 Pce, 10, 11, 12, 13, 10 Pce, 10, 12, 13, 14, 15, 16, 17, 18, 19, 14, 15, 17, 19, 21, 21, 22, 26, 27mm 24, 27mm

$55.00

$85.00

$83.50

M7-MB45010M DEEP SOCKET METRIC

$112.50

1/2" DRIVE IMPACT SOCKET SETS IMPERIAL

M7-MB44013S STANDARD IMPERIAL

M7-MB45013S DEEP SOCKET IMPERIAL

13 Pce, 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/8", 1-3/16", 1-1/4"

$117.50

$172.50

FREIGHT CHARGES MAY APPLY. PRICES INCLUDE GST

3/4" DRIVE IMPACT SOCKET SETS METRIC

M7-MB64008M STANDARD METRIC

M7-MB65008M DEEP SOCKET METRIC

8 Pce, 26, 27, 29, 30, 32, 33, 35, 36mm

26, 27, 29, 30, 32, 33, 35, 36mm

$185.00

$250.00

3/4" Impact Wrenches

Part No.

M7-NC6210Q

M7-NC6236Q

M7-NC6255Q

M7-NC6255Q-6

M7-NC6217

M7-NC6218

Torque

700 ft-lb

1200 ft-lb

1400 ft-lb

1500 ft-lb

Bolt Capacity

3/4” (19mm)

1" (25mm)

1-1/8" (30mm)

1-1/16" (27mm)

Feature

Low Cost

Heavy Duty, Light Weight

Light Weight, Composite, High Output

6” Extended Anvil

Extra Heavy Duty, High Output

D Handle

Weight

2.55kg

2.68kg

1.9kg

2.38kg

5.0kg

5.7kg

Noise

85.0 dBA

83.0 dBA

85.0 dBA

92.0 dBA

106 dBA

Price

$455.00

$540.00

$585.00

$600.00

$1025.00

$1275.00

1" Impact Wrenches

Part No.

M7-NC8343-8

M7-NC8217

M7-NC8237

M7-NC8252

M7-NC8262

M7-NC8382

M7-NC8382-8

Torque

1800 ft-lb

1500 ft-lb

1800 ft-lb

2400 ft-lb

2500 ft-lb

Bolt Capacity

1-3/8" (33mm)

1-1/4" (30mm)

1-3/8" (33mm)

1-7/16" (36mm)

1-7/16” (36)

1-9/16" (40mm)

1-9/16” (40mm)

Feature

8" Anvil, Low Cost

Pistol Type

Pistol Type, High Output

Low Cost, High Output 8” Anvil

High Output, Light Weight

8" Anvil

Weight

13.9kg

5kg

5.7kg

12.1kg

13.5kg

11kg

12.5kg

Noise

103.0 dBA

92 dBA

100 dBA

Price

$860.00

$1025.00

$1375.00

$1450.00

$1875.00

$2000.00

Impact Socket Kits 3/4" DRIVE IMPACT SOCKET SETS IMPERIAL

M7-MB64008S STANDARD IMPERIAL

M7-MB65008S DEEP SOCKET IMPERIAL

1", 1-1/16", 1-1/8", 1-1/4", 1-5/16", 1-3/8", 1-7/16" & 1-1/2"

$200.00

$270.00

1-1/2" Impact Wrench

M7-NC4255-KIT

M7-NC6255-KIT

1/2" DRIVE AIR IMPACT WRENCH KIT

3/4" DRIVE AIR IMPACT WRENCH KIT

1-1/2" DRIVE AIR IMPACT WRENCH

• M7-NC4255Q Impact Wrench • 13, 17, 19, 21, 22, 24, 27mm impact sockets • 125mm Extension bar locking ball type • Mini lubricator

• M7-NC6255Q Impact Wrench • 24, 27, 30, 32, 33, 34, 36mm impact sockets • 175mm Extension bar locking ball type • Mini lubricator

• 3500ft-lb Max torque! • 2" (50mm) Bolt capacity • 19.7kg Weight • 104.5 dBA Noise • Available with 8" anvil

$390.00

$710.00

$5875.00

FREIGHT CHARGES MAY APPLY. PRICES INCLUDE GST

M7-NC9223

Angle Grinders

LEVER THROTTLE AIR ANGLE GRINDERS

ROLL THROTTLE AIR ANGLE GRINDERS

EXTRA HEAVY DUTY AIR ANGLE GRINDERS

Free speed : 11000 RPM Spindle size : 3/8"-24 Net weight : 1.81kg • Safety lever throttle • 0.78HP motor for stall resistance

Free speed : 11000 RPM Net weight : 1.81kg • Roll throttle • 0.78HP motor for stall resistance

Free speed : 11000 RPM Net weight : 1.81kg • Available with imperial or metric spindle sizes • Safety lever throttle • 1.3 HP motor for stall resistance • Reversible flange suitable for use with thin cut off wheels • One piece housing reduces maintenance costs • Heavy duty air cooled spiral gears and double bearings for durability

• Grinding wheel not included

M7-QB114

100mm Diameter

M7-QB115

125mm Diameter

$340.00 $340.00 M7-QB117

• Grinding wheel not included

M7-QB144

M7-QB145

M7-QB7114

M7-QB7145

M7-QB7115

$335.00

$340.00

$405.00

$415.00

$425.00

100mm Diameter M10 x 1.5 Spindle

125mm Diameter M14 x 2.0 Spindle

M7-QB177

100mm Diameter 3/8"-24 Spindle

112mm Diameter 5/8"-11 Spindle

M7-QB197Q

180mm AIR ANGLE GRINDER

Free speed : 7000 RPM Net weight : 3.24kg • Safety lever throttle • 1.0HP motor • Spline drive system with locking bolt

Free speed : 7600 RPM M14x2.0 Spindle size : 5/8"-11 spindle version also available Net weight : 3.3kg M7-QB177M • 2.0HP motor • Safety lever throttle • 92 dBA

Free speed : 7000 RPM M14x2.0 Spindle size : 5/8"-11 spindle version also available Net weight : 3.1kg M7-QB197QM • Extra heavy duty • Safety lever throttle • 2.2HP motor • Extra quiet 77 dBA

• Grinding wheel not included

$575

$910

65mm STRAIGHT GRINDER

100mm STRAIGHT GRINDER

M7-QB2925L Safety lever

M7-QB2925 Roll throttle

$430.00 $430.00

.00

Max. wheel size : 100 x 19 x 12.7mm Free speed : 9500 RPM Spindle size : 1/2" 12UNC Max. output : 650 watt Weight : 2.3kg • Extended shaft model also available

NHG-100ALW Safety lever

NHG-100A

Roll throttle

$730.00 $665.00

125mm Diameter 5/8"-11 Spindle

75mm AIR WET GRINDER

180mm AIR ANGLE GRINDER

Max. wheel size : 65 x 13 x 9.5mm Free speed : 16000 RPM Spindle size : 3/8”-16 Max. output : 670 watt Weight : 1.39kg

Free speed : 4500 RPM Spindle size : 5/8"-11 Water hose length : 3m Air hose length : 3m Net weight : 2.2kg • Valve throttle type

$905.00

M7-QB603

125mm VERTICAL GRINDER

180mm VERTICAL GRINDER

Free speed : 12000 RPM Spindle size : 5/8"-11 Net weight : 2.8kg

Free speed : 7000 RPM Spindle size : 5/8"-11 Net weight : 4.0kg

• Grinding wheel not included

M7-QB185

M7-QB187

$995.00

$585.00

$1125.00

50mm MINI AIR ANGLE GRINDER

75mm AIR CORNER CUT OFF TOOL

100mm AIR CORNER CUT OFF TOOL

Free speed : 22000 RPM Rated power : 0.4 HP Net weight : 0.52kg • Mini size, only 160mm length • Comes with sanding pad

Free speed : 20000 RPM • Excellent for cutting rusted bolts, nuts, motor exhaust Net weight : 0.8kg clamps or hangers, sheet Motor : 0.9 HP metal, fibreglass etc. • Cutting wheel not included

Free speed : 16000 RPM Net weight : 1.59kg

M7-QB623 14

$255.00

ANGLE

• Grinding wheel not included

180mm AIR ANGLE GRINDER

.00

100°

M7-QC213

$120.00

FREIGHT CHARGES MAY APPLY. PRICES INCLUDE GST

M7-QC234

$375.00

Air Blow Guns

M7 STANDARD AIR BLOW GUNS

Part No. Nozzle Length M7-JC405 125mm M7-JC410 250mm M7-JC412 305mm M7-JC424 610mm M7-JC435 890mm

Air Inlet : 1/4"

M7-JC405

$9.00

M7-JC410

HEAVY DUTY STRAIGHT NOZZLE AIR BLOW GUN Air inlet : 1/4" metal fitting Net weight : 0.16kg Nozzle length : 100mm • Durable body

M7-JC504

$13.50

Price $9.40 $13.00 $14.50 $24.00 $28.00

M7-JC435

HEAVY DUTY STRAIGHT NOZZLE AIR BLOW GUN EXTENDED REACH

EXTENDABLE SWIVEL AIR BLOW GUN Air inlet : 1/4" metal fitting Net weight : 0.22kg Nozzle length : 165 to 305mm • Nozzle angle rotates • Tube extends and retracts for optimal positioning • Durable body

M7-JC507

$21.50

SUPER AIR BLOW GUNS Air inlet : 1/4" metal fitting • Durable body

Air inlet : 1/4" metal fitting Net weight : 0.19kg Nozzle length : 250mm • Durable body

M7-JC510

$15.50

M7-JC640

M7-JC680

$84.50

$140.00

Nozzle length : 1016mm Net weight : 0.34kg

Nozzle length : 2032mm Net weight : 0.64kg

Cleaning Guns WONDER GUN Vacuum level : 7.5mmHg Net weight : 0.67kg • Can be used as blow gun or air vacuum gun • Use for suction of dust, wood chips, metal shavings, glass etc. • 6 piece set

M7-WG202

$70.00

GRIT BLASTING GUN WITH SUCTION PIPE Steel pick up length : 600mm Hose length : 1m Net weight : 0.44kg • For removing rust, old paint and ingrained dirt etc.

M7-SX3103

$155.00

CLEANING GUN - FLEXIBLE HOSE Capacity : 1L Net weight : 0.47kg • Suitable for applying degreasant and cleaning agents • Lance with adjustable nozzle with cone

M7-SX3202

$160.00

ENGINE CLEANING GUN

GRIT BLASTING GUN

Cup capacity : 1L Net weight : 0.5kg • Composite body

Capacity : 1L Net weight : 0.57kg • For removing rust, old paint and ingrained dirt etc. • Adjustable nozzle • Hanger hook

M7-SX1615

$65.00

M7-SX3101

$70.00

UNDERSEAL GUN

CLEANING FOAM SPRAY GUN

Capacity : 1L Net weight : 0.22kg • For applying underseal and stone chip coatings • Adjustable nozzle • Hanger hook

Capacity : 1.8L Net weight : 0.22kg • Includes 2 nozzles • Adjustable air valve

M7-SX3112

$62.00

CLEANING GUN - RIGID HOSE Capacity : 1L Net weight : 0.53kg • Polyethylene tank and tube with adjustable spray / jet nozzle • Lance with adjustable nozzle with cone • Suitable for applying degreasant and cleaning agents

M7-SX3203

$70.00

FREIGHT CHARGES MAY APPLY. PRICES INCLUDE GST

M7-SX3201

$155.00

TWISTER GUN Capacity : 1L Net weight : 0.78kg • Adjustable valve for controlling detergent output volume • Twisting action to increase detergent hang time • Filling hole on container, no need to detach to fill

M7-SX2101

$190.00

Air Riveters

Part No.

M7-PA301

Traction Power 2303 lbf Alloy Rivet

M7-PA201

M7-PA211

M7-PA321

3534 lbf

3748 lbf

2612 lbf

2.4mm - 4.8mm

2.4mm - 6.4mm

2.4mm - 4.8mm

Stainless Rivet 2.4mm - 4.0mm

2.4mm - 4.8mm

2.4mm - 6.4mm

2.4mm - 4.8mm

Stroke Length

16mm

14mm

18mm

22mm

Weight

1.5kg

1.8kg

1.75kg

1.5kg

Price

$235.00

$515.00

$860.00

Part No.

M7-PA301V

Pneumatic Tools SUPPORT VALUE EXPERTISE To view the full range of M7 Air Riveters visit

www.m7tools.com.au

Belt Sanders

AIR BELT SANDER 10 x 330mm Free speed : 16000 RPM Net weight : 0.95kg

M7-QB321

$255

.00

AIR BELT SANDER 20 x 520mm Free speed : 16000 RPM Net weight : 1.40g

M7-QB322

$355.00

AIR BELT SANDER 30 x 540mm Free speed : 13000 RPM Net weight : 2.40g

M7-QB313

$555.00

AIR BELT SANDER 12.7 x 610mm Free speed : 16000 RPM Net weight : 1.10g

M7-QB324

$320.00

BELT SANDER MULTI - ARM KIT Free speed : 16000 RPM • 5 x extension bars • 5 x belts 10 x 330mm to 20 x 520mm • Adjustable belt speed • Plastic storage case

M7-QB325N 16

$475.00

Traction Power 2303 lbf Alloy Rivet

M7-PA301MV

M7-PA211TS

M7-PA111

2303 lbf

3748 lbf

4100 lbf

2.4mm - 4.8mm

2.4mm - 6.4mm

4.0mm - 8.0mm

Stainless Rivet 2.4mm - 4.0mm

2.4mm - 4.0mm

2.4mm - 6.4mm

4.0mm - 7.2mm

Stroke Length

16mm

18mm

26mm

Feature

Vacuum Type External Hose

Vacuum Type Internal Hose

For truck brake shoes

Weight

1.5kg

1.75kg

3.0kg

Price

$429.00

$1295.50

$1225.00

$2550.00

Rivet Nut Tools

AIR HYDRAULIC RIVET NUT TOOL Traction power : 3638 lbf Stroke length : 9mm Net weight : 1.5kg Comes with mandrel sizes : M4, M5, M6, M8 & M10 Suitable for use with :

• Steel M4 - M10 • Stainless steel M4 - M8

M7-PB2402

$840.00

Attachments RIVETER ATTACHMENT

• Nose Piece : 2.4mm, 3.2mm, 4.0mm, 4.8mm • Net Weight : 0.3kg • Hex Shank : 1/4" • For use with 3/8" cordless drills

AIR HYDRAULIC RIVET NUT TOOL

Traction power : 4630 lbf Stroke length : 6.5mm Net weight : 2.5kg Comes with mandrel sizes : M3, M4, M5, M6, M8, M10 & M12 • Steel & stainless steel M3 - M12

M7-PB2501

$3025.00

QUICK RELEASE AIR RIVET NUT TOOLS

M7A-PA9048P

$87.50

RIVET NUT ATTACHMENT • Nose Piece : M3, M4, M5, M6 • Net Weight : 0.28kg • Hex Shank : 1/4" • For use with 3/8" cordless drills

• Automatic mechanism to quickly push up and pull back rivet • Quick release Part No. Size Speed Price M7-PB1305 M3 & M5 1200RPM $680.00 M7-PB1308 M6 & M8 600RPM $755.00 M7-PB1310 M8 & M10 400RPM $770.00

FREIGHT CHARGES MAY APPLY. PRICES INCLUDE GST

M7A-PB9006P

$130.00

Air Sanders

Part No.

M7-QP212

M7-QP213

M7-QP113

M7-QP215

M7-QB49602

M7-QB55602

M7-QB54602

M7-QB56602

Non Vacuum Sander Random Orbital

Central Vacuum Sander Random Orbital

Self Generated Vacuum Sander Random Orbital

Type

High Speed Mini Air Dual Action Mini Air Air Pistol Sander Sander Sander

High Speed Air Sander

Non Vacuum Sander Random Orbital

Size

50mm, 75mm Ø

75mm Ø

75mm, 115mm, 125mm Ø

150mm Ø

Free Speed

18000 RPM

16000 RPM

15000 RPM

16000 RPM

10000 RPM

Feature

Mini Type

9.5mm Orbit

5mm Orbit

Weight

0.5kg

0.72kg

0.91kg

0.68kg

0.78kg

Price

$115.00

$155.00

$230.00

$145.00

$135.00

$235.00

$270.00

$325.00

Part No.

M7-QB58602

M7-QB58642

M7-QB57602

M7-QB57642

M7-QB59602

M7-QB59642

M7-QB46612

M7-QP307M

Type

Non Vacuum Orbital Air Sander 2 Handed

Central Vacuum Orbital Air Sander 2 Handed

Self Generated Vacuum Orbital Air Sander 2 Handed

Non Vacuum Orbital Air Sander

Angle Air Sander

Size

150mm Ø

178mm Ø

Free Speed

10000 RPM

900 RPM

10000 RPM

900 RPM

10000 RPM

900 RPM

10000 RPM

4500 RPM

Feature

5mm Orbit

5mm Orbit Gear Transmission

5mm Orbit

5mm Orbit Gear Transmission

5mm Orbit

5mm Orbit Gear Transmission

2.5mm Orbit

M14 Spindle size

Weight

1.2kg

1.6kg

1.2kg

1.6kg

1.2kg

1.6kg

0.79kg

2.04kg

Price

$305.00

$320.00

$295.00

$330.00

$340.00

$375.00

$265.00

$245.00

75mm MINI AIR PISTOL POLISHER

178mm AIR ANGLE POLISHER

Free speed : 5500 RPM Spindle : 5/16” - 24 Net weight : 0.5kg

Free speed : 2500 RPM Spindle : 5/8" UNC Net weight : 2.04kg

AIR RANDOM ORBITAL SANDER 100 x 110mm (Jitterbug Sander) Orbit : 2.5mm Net weight : 0.91kg • Non vacuum

M7-QP223

$170.00

M7-QP317

$270.00

M7-QB48111

75mm DUAL ACTION MINI AIR SANDER SET

75mm MINI AIR POLISHER SET

75mm HIGH SPEED MINI AIR SANDER SET

• Air mini polisher (M7-QP213) • 50mm & 75mm pads • 50mm & 75mm sandpaper #180 - #320 (60pcs) • 1/4" coupler • Oil bottle • Spanner wrenches

• Air mini polisher (M7-QP223) • 75mm pad backing pad • 75mm sponges (medium & coarse) • 75mm wool bonnet • 1/4" coupler • Spanner wrench

• Air high speed sander (M7-QP212) • 50mm & 75mm rubber pads • 50mm & 75mm abrasive & stripping discs • 1/4" coupler • Oil bottle • Spanner wrench

Free speed : 2100 RPM

M7-QP213N

$285.00

Free speed : 5500 RPM

M7-QP223N

$270.00

Free speed : 18000 RPM

M7-QP212N

$210.00

FREIGHT CHARGES MAY APPLY. PRICES INCLUDE GST

$430.00

75mm AIR SANDER SET Free speed : 15000 RPM

• Air mini polisher (M7-QB625) • 50mm & 75mm backing pads • 50mm & 75mm #80 - #300 discs (12 pcs) • Spanner wrench • Oil bottle • Air regulator • Adaptor

M7-QB0618

$260.00

Air Drills

Part No.

M7-QE323

M7-QE833

M7-QE831

M7-QE933

M7-QE633

M7-QE532

Type

Air Drill Mini Pistol

Air Drill

Air Drill Straight

90° Angle Air Drill

Air Drill

Size

1/4"

3/8"

3/8”

Free Speed

1600 RPM

1800 RPM

2600 RPM

1600 RPM

2800 RPM

Feature

164mm length, reversible

Keyed chuck, reversible, quiet operation

Keyless chuck, reversible, quiet operation

110mm head height, reversible

Keyless chuck, reversible, extra heavy duty

Weight

0.78kg

1.1kg

0.9kg

1.1kg

1.23kg

Price

$145.00

$125.00

$155.00

$200.00

$245.00

$470.00

Part No.

M7-QE843

M7-QE841

M7-QE441

M7-QE845

NRD-19RLW

M7-QE231

Type

Air Drill

Spot Weld Drill

Size

1/2"

1/2”

#2 MT

5/16"

Free Speed

800 RPM

1100 RPM

500 RPM

750 RPM

1600 RPM

Feature

Keyed chuck, reversible, quiet operation

Keyless chuck, reversible, quiet operation

Keyless chuck, reversible, extra heavy duty

Keyed chuck, reversible, quiet operation, low RPM

Safety lever throttle, reversible, Morse taper spindle

Comes with hook

Weight

1.7kg

1.73kg

1.80kg

5.5kg

2.1g

Price

$195.00

$230.00

$386.50

$230.00

$1825.00

$560.00

Air Tappers

ADJUSTABLE TORQUE AIR TAPPING CHUCK

ADJUSTABLE TORQUE AIR TAPPER

$385.00

Sand Rammers

Capacity : • Aluminium M3 - M12 • Copper M3 - M12 • Steel M3 - M10 • Stainless Steel M3 - M10 Speed : 150 RPM Weight : 2.45kg • Adjustable clutch • Reversible

M7-PC2010

Part No. M7-ZB812M M7-ZB812L M7-ZB812XL M7-ZB812XXL M7-ZB814M M7-ZB814L M7-ZB814XL M7-ZB814XXL

$990.00

SAND RAMMER

Rubber butt diameter : 40mm Stroke : 60mm Length : 337mm Weight : 2.1kg

Rubber butt diameter : 70mm Stroke : 120mm Length : 1134mm Weight : 9.0kg

B-00A 18

$830.00

ANTI VIBRATION GLOVES • Gel filled palm pad to decrease vibrations • Available in full fingered (pictured) & half fingered

Capacity : M3~6.35 Weight : 0.6kg

M7-PC901

Gloves

F-2

$1300.00

FREIGHT CHARGES MAY APPLY. PRICES INCLUDE GST

Description Size Full finger Medium Full finger Large Full finger Extra Large Full finger Extra Extra Large Half finger Medium Half finger Large Half finger Extra Large Half finger Extra Extra Large

Price $24.00 $24.00 $24.00 $24.00 $22.50 $22.50 $22.50 $22.50

Air Screwdrivers

Part No.

M7-RA801

M7-RA802

M7-RA811

M7-RA2161

M7-RA1142

M7-RA1162

Type

Air Screwdriver Pistol

Air Screwdriver Straight

Size

Free Speed

1800 RPM

800 RPM

2100 RPM

750 RPM

1700 RPM

600 RPM

Feature

Positive adjustable clutch

Positive clutch

Positive adjustable clutch

Torque

3.8 - 10.4 ft/lb

3.8 - 13.3 ft/lb

5 - 13 ft/lb

1.4 - 3.7 ft/lb

0.7 - 2.2 ft/lb

1.5 - 5.9 ft/lb

Weight

1.2kg

1.3kg

1.13kg

1.0kg

0.61kg

0.95kg

Price

$180.00

$200.00

$240.00

$410.00

$185.00

$220.00

Scalers

AIR SCREWDRIVER

AIR NEEDLE SCALER

AIR FLUX CHIPPER

Blow per minute : 5500 BPM Net weight : 1.3kg Needle size : 3 x 123mm (12 per set) Overall length : 290mm

Blow per minute : 4000 BPM Shank size : Square 0.510" (13mm) Net weight : 1.33kg

M7-SN1288

M7-SN1032

$205.00

AIR PISTOL NEEDLE SCALER Blow per minute : 3700 BPM Net weight : 2.8kg Needle size : 3 x 180mm (19 per set) Overall length : 330mm

CHISEL ATTACHMENT • For use with M7-SN1288 Air Needle Scaler • Includes nut, chisel and spring

M7A-SN1288CHKIT

$60.50

M7-SN2110

SPRING BALANCERS

FROM

$53 Travel Length M7-SP101 0.3 - 0.85kg 1.6m M7-SP102 0.6 - 1.5kg 1.6m M7-SP103 1.0 - 2.0kg 1.6m M7-SP104 1.5 - 3.0kg 1.5m M7-SP105 3.0 - 5.0kg 1.5m

M7-SN2124

$730.00

$385.00

• Shut off type • Industrial grade, excellent for long continuous operation on various mass production lines • Precise machined components • Low noise and vibration rate, high adjustable accuracy up to ±5%. • Pressing to start level, ergonomic design, compact volume, light weight, easy and comfortable to operate.

AIR PISTOL NEEDLE SCALER

M7-SN2128

$820.00

Part No. M7-RA3011 M7-RA3017 M7-RA3023 M7-RA4008 M7-RA4015 M7-RA4021 M7-RA5005 M7-RA5008 M7-RA5017

Torque Range 6.7 - 18.5 in-lb 6.2 - 13.2 in-lb 3.5 - 8.8 in-lb 14.1 - 35.4 in-lb 8.8 - 19.4 in-lb 8.8 - 13.2 in-lb 44.2 - 92.9 in-lb 26.5 - 48.6 in-lb 13.2 - 23.0 in-lb

Price $770.00 $770.00 $770.00 $815.00 $815.00 $815.00 $860.00 $860.00 $860.00

SPIRAL SPRING BALANCERS

The spring balancers will retract when released and tension will be higher the longer the wire is dragged out. The balancer is equipped with an automatic safety drum lock in case of spring failure.

Capacity

Blows per minute : 4000 BPM Net weight : 3.6kg Needle size : 3 x 180mm (24 per set) • Springless design for superior performance

Blows per minute : 3500 BPM Net weight : 2.8kg Needle size : 3 x 180mm (28 per set) • Springless design for superior performance

Spring Balancers

Part No.

$245.00

TORQUE CONTROLLED

AIR PISTOL NEEDLE SCALER

.50

Cable Price Diamater 2.5mm $53.50 2.5mm $53.50 2.5mm $53.50 3.2mm $82.50 3.2mm $100.00

• Features a sturdy metal casing

FROM

$390.00 Part No.

Capacity

M7-SP3090 M7-SP3150 M7-SP3220 M7-SP3300 M7-SP3400 M7-SP3500 M7-SP3600 M7-SP3700

5 - 9kg 9 - 15kg 15 - 22kg 22 - 30kg 30 - 40kg 40 - 50kg 50 - 60kg 60 - 70kg

FREIGHT CHARGES MAY APPLY. PRICES INCLUDE GST

Travel Length 1.3m 1.3m 1.5m 1.5m 1.5m 1.5m 1.5m 1.5m

Cable Diamater 4.0mm 4.0mm 4.8mm 4.8mm 4.8mm 4.8mm 4.8mm 4.8mm

Price $390.00 $430.00 $860.00 $945.00 $1425.00 $1500.00 $1600.00 $1725.00 19

Air Die Grinders

Part No.

M7-QA211

M7-QA313B

M7-QA315B

M7-QA141

M7-QA131

M7-QA151

Air Die Grinder

Extended Air Die Grinder

Air Die Grinder

6 & 3mm (M7-QA111A) 6 & 3mm (M7-QA211A) 1/4" & 1/8" (M7-QA211B)

1/4" & 1/8"

6mm (M7-QA141A) 1/4" (M7-QA141B)

3mm (M7-QA131A) 1/8" (M7-QA131B)

6mm (M7-QA151A) 1/4" (M7-QA151B)

Free Speed

25000 RPM

20000 RPM

25000 RPM

24000 RPM

30000 RPM

18000 RPM

Power

0.3 HP

0.9 HP

0.3 HP

0.9 HP

Feature

Metal front cap

Heavy duty model, metal front cap

235mm length

280mm length

Extra heavy duty model, Extra heavy duty model, Extra heavy duty model, roll throttle, side forged steel, roll throttle forged steel, roll throttle exhaust

Weight

0.38kg

0.65kg

0.58kg

0.63kg

0.6kg

0.80kg

Price

$110.00

$130.00

$200.00

$215.00

$380.00

$420.00

$475.00

Part No.

M7-QA651B

M7-QA611B

M7-QA632

M7-QA511

M7-QA412

M7-QA4507B

Type

Mini Pistol Air Die Grinder

90° Angle Head Air Die Grinder

97° Angle Head Air Die Grinder

Air Engraving Pen

Micro Air Die Grinder

Extended Length Micro Air Die Grinder

Collets

1/4"

1/4” & 1/8”

6 & 3mm (M7-QA632A) 1/4” & 1/8” (M7-QA632B)

1/4"

3mm (M7-QA412A) 1/8” (M7-QA412B)

1/4"

Free Speed

18000 RPM

19000 RPM

22000 RPM

60000 RPM

32000 RPM

Power

0.3 HP

0.4 HP

Type Collets

M7-QA111 Air Die Grinder 1/4" & 1/8" (M7-QA111B)

100mm Head height. Feature

Pistol shape

73mm Head height

Straight drive air motor in head so no gears to wear out

Blows per minute 13000 BPM

1500mm length

Weight

0.5kg

0.51kg

0.5kg

0.23kg

0.24kg

0.4kg

Price

$130.00

$170.00

$200.00

$160.00

$255.00

$550.00

Air Die Grinder Kit

AIR DIE GRINDER KIT

Part No.

M7-QA163LB

M7-QA143B

M7-QA1710B

NHG-65LKLW

Type

Extended Air Die Grinder

Slimline Extended Air Die Grinder

Extended Air Die Grinder

Collets

1/4"

1/4”

1/4"

Free Speed

16000 RPM

24000 RPM

18000 RPM

Power

0.9 HP

0.4 HP

0.6 HP

296mm Overall length, roll throttle

Heavy duty model, 225mm or 465mm length, safety lever throttle

538mm Overall length, safety lever throttle

Feature

350mm Overall length, safety lever throttle

Weight

1.31kg

0.9 kg

1.07kg

1.3kg

Price

$475.00

$564.00

$795.00

$610.00

Free speed : 25000 RPM Rated power : 0.3 HP • Metal front cap Kit contains : • 1pc die grinder (M7-QA111B) • 1/8" & 1/4" collets • 2x spanner wrenches • 5x 1/8" shank mounted point • 5x 1/4" shank mounted point • 1x plug

M7-QA0115B

FREIGHT CHARGES MAY APPLY. PRICES INCLUDE GST

$150.00

Air Hammers

AIR HAMMER SET

AIR CHIPPING HAMMER HEX SHANK

Blows per minute : 3200 BPM Shank : Round 10.2mm Contents: • 1pc Air hammer (M7-SC211C) • 5pcs Chisel kit • 1pc Spring retainer

M7-SC0517C

Air Brush Set

AIR BRUSH SET

0.2mm nozzle bore 7.0 c.c. colour cup capacity Spray controlled with needle adjustor

Shank size : 0.58" (15mm) Blows per minute : 2300BPM Net weight : 7.8kg • Forged steel body provides industrial level quality and durability

Contents: • Air brush • Copper cup • Mix bottle • PU air hose 4x1850mm • Pipette • 1/4" Air adaptor, M5x0.4P • Spanner • Storage bottle

Chisels supplied separately : Blade chisel (M7A-SN9201) $35.00 Point chisel (M7A-SN9203) $35.00

$165.00

M7-SN3222

Air Punch & Flange

$805.00

M7-SR1101

$150.00

Hoist

5mm AIR PUNCH & FLANGE TOOL

8mm AIR PUNCH & FLANGE TOOL

HOIST

Punch diameter : 5mm Punch capacity : 1.6mm (steel) Net weight : 1.15kg

Punch diameter : 8mm Punch capacity : 1.2mm (steel) Net weight : 1.15kg

Capacity : 500kg Lift speed : 12.6m/min Chain drop : 3m Weight : 16.0kg

M7-PN150

$170.00

M7-PN180

Air Sheet Metal Cutters AIR SHEAR - PISTOL TYPE

AIR SHEAR - STRAIGHT TYPE

Sheet cut capacity : • Aluminium : 1.6mm • Mild steel : 1.2mm • Stainless steel : 1.0mm Net weight : 1.1kg

Sheet cut capacity : • Aluminium : 1.6mm • Mild steel : 1.2mm • Stainless steel : 1.0mm Net weight : 1kg

M7-QG202

$135.00

Air Grease Guns

AIR GREASE GUN

MANUAL PULSE TYPE Capacity : 450g cartridge or 500g bulk Net weight : 1.46kg • Bulk & cartridge type

M7-SG500

$73.50

M7-QG102

$145.00

AIR GREASE GUN

CONTINUOUS FULLY AUTOMATIC TYPE

$180.00 AIR NIBBLER

Sheet cut capacity : • Aluminium : 1.6mm • Steel : 1.2mm Net weight : 1kg • Strengthened punch • Pull type cutting head for durability

M7-QG103

$145.00

Air Caulking Guns

AIR CAULKING GUN Net weight : 1.1kg • Ergonomic design for comfortable operation

Capacity : 450g cartridge or 500g bulk Working pressure : 40 - 90psi Output volume : 288ml/min Net weight : 1.6kg • Bulk & cartridge type • Heavy duty cast aluminium body for maximum durability • Includes 305mm flexible hose

M7-SG501

$170.00

M7-SK1010

$65.00

FREIGHT CHARGES MAY APPLY. PRICES INCLUDE GST

RHL-500

$3850.00

AIR SAUSAGE CAULKING GUN Capacity : 600ml sausage Net weight : 1.21kg

M7-SK1131

$240.00

Automotive Tools AIR SURFACE CLEANING TOOL KIT

AIR SURFACE CLEANING TOOL

AIR WINDSHIELD REMOVER

• Air surface cleaning tool (M7-QB802) • Rubber wheel • Steel wire wheel and hub • Coarse wire wheel • Fine wire wheel • Clean and strip wheel

Free speed : 3600 RPM • For removing vinyl, decals, pinstripes, reflective tape and adhesives quickly and easily

Net weight : 1.1kg

AIR ERASER

PADS AVAILABLE FOR USE AS SANDER • Rear exhaust & extended muffler tube • Lower vibration minimises fatigue • Blade can be mounted in 12 positions • Comes with M7A-QK11150 blade

Wheels size : Ø 90 x 15mm Free speed : 3400 RPM • Removes vinyl, decals, pinstripes, reflective tape and adhesives quickly and easily in a single operation • Suitable for metal, glass, wood and fibreglass • Small size suitable for confined spaces

Optional Accessory M7A-QB9320 Triangular sander pad

M7-QB0808

$560.00

M7-QB802

$330.00

M7-QK111

$190.00

M7-QB812

PNEUMATIC CV JOINT BOOTS FITTING TOOL

TRUCK TYRE INFLATOR

PNEUMATIC FLUID EXTRACTOR

Size range : 1" to 4-3/8" (25 to 110mm) • Suitable for cars, small vans and light duty commercial vehicles

Gauge size : 100mm Max pressure : 220 PSI Hose dimensions : 1/4" x 1000mm • Tyre valve clip nozzle

Capacity : 9L • Enables removal of vehicle fluids without requiring to jack up vehicle • Automatic shut off of extractor unit when extractor tank reaches full capacity

M7-QM1125

$425.00

DIGITAL TYRE INFLATOR Net weight : 0.32kg • PSI readout • Clip type nozzle

M7-SB201B

$78.00

Air Hose Reels

M7-SB423

$115.00

M7-SM0902

TYRE INFLATOR SERVICE STATION STYLE Range : 0 - 160 PSI Hose length : 300mm • Hold on dual angle nozzle

M7-SB501

$140.00

PNEUMATIC BRAKE EXTRACTOR & REFILL KIT Capacity : 2L • Can be used for automatic hydraulic applications such as brake, clutch and power steering systems

$255.00

M7-SM0502

TYRE BUFFER Free speed : 2500 RPM Net weight : 0.8kg • Quick change 7/16” hex shank tool holder, Includes 3/8” 24UNC thread adaptor • Safety lever throttle

M7-QT113

$170.00

$190.00

$340.00

AIR POWERED BRAKE CALIPER WIND-BACK TOOL SET • 17 Piece set

M7-SQ0217

$255.00

PLASTIC AIR HOSE REEL

METAL BODY AIR HOSE REEL

METAL AIR HOSE REEL

Hose length : 15m I.D. : 10mm O.D. : 15mm Male PT Fitting : 3/8” Net weight : 6.0kg • Wall mounted shock proof plastic case

Hose length : 15m I.D. : 8mm O.D. : 12mm Male PT Fitting : 1/4” Net weight : 6.2kg

Hose length : 20m I.D. : 10mm O.D. : 18mm Male PT Fitting : 3/8” Net weight : 24.0kg • Wall mounted open steel case

M7-SA3315 22

$255.00

• Heavy-duty hoses • Commercial grade auto-rewind air hose reels • Durable spring powered recoil • Heavy duty wall mounted steel case

M7-SA2015

$360.00

FREIGHT CHARGES MAY APPLY. PRICES INCLUDE GST

M7-SA4320

$515.00

Spray Guns S770-S SERIES Pot size : 1000ml Includes : Gun, pot, stainless steel nozzle and needle • A popular conventional high pressure spray gun that provides extremely fine atomisation for the D.I.Y. person to the professional • For applications such as automotive spraying

Part No. S770-11S S770-21S S770-31S S770-41S S770-51S

Nozzle Size 1.5mm 1.7mm 2.0mm 2.5mm 3.0mm

Spray Pattern 235mm 245mm 260mm 275mm 275mm

Price $139.00 $139.00 $139.00 $139.00 $185.00

GENERAL PURPOSE “SMP” SERIES

PROFESSIONAL “EVO T” SERIES

Pot size : 1000ml Air consumption : 11.0 - 13.0 CFM (310 - 365 LPM) Includes : Gun, pot, stainless steel nozzle and needle • Achieves large fan, premium finishing results, fast application speed and 65% transfer efficiency at 29PSI • Ideal for car refinishing, high class furniture and industrial use

Pot size : 1000ml Air consumption : 12.0 - 14.0 CFM (340 - 395 LPM) Includes : Gun, pot, stainless steel nozzle and needle • EVO-T Patented air cap design providing ultra fine finish & excellent transfer efficiency exceeding 72% at 15PSI • Improved ergonomics providing perfect body balance & handling for manoeuverability • Stronger forged body

Part No. Nozzle Size SG-SMP106FS-014 1.4mm SG-SMP106FS-016 1.6mm SG-SMP106FS-018 1.8mm SG-SMP106FS-020 2.0mm SG-SMP106FS-025 2.5mm

Spray Pattern 270-320mm 270-320mm 270-320mm 270-320mm 270-320mm

Price $245.00 $245.00 $245.00 $245.00 $245.00

Part No. SG-EVO106FS-012 SG-EVO106FS-014 SG-EVO106FS-018 SG-EVO106FS-020 SG-EVO106FS-025

Nozzle Size Spray Pattern 1.2mm 230-270mm 1.4mm 230-270mm 1.8mm 230-270mm 2.0mm 230-270mm 2.5mm 230-270mm

GRAVITY FEED SPRAY GUN

GENERAL PURPOSE “SMP” SERIES

PROFESSIONAL “EVO T” SERIES

Pot size : 600ml Includes : Gun, pot, stainless steel nozzle and needle • Provides constant paint flow at lower pressures, and extremely fine atomisation for suitable professional applications.

Pot size : 600ml Air consumption : 10.5 - 12.5 CFM (300 - 355 LPM) • 65% transfer efficiency Includes : Gun, pot, stainless steel nozzle and needle

Pot size : 600ml Air consumption : 11.5 - 13.5 CFM (325 - 380 LPM) • 72% transfer efficiency Includes : Gun, pot, stainless steel nozzle and needle

Part No. S106-141G S106-201G S106-281G

Nozzle Size 1.4mm 2.0mm 2.8mm

Spray Pattern 250mm 270mm 270mm

Price $159.00 $159.00 $159.00

Part No. Nozzle Size SG-SMP106FG-013 1.3mm SG-SMP106FG-014 1.4mm SG-SMP106FG-015 1.5mm SG-SMP106FG-018 1.8mm SG-SMP106FG-020 2.0mm SG-SMP106FG-025 2.5mm

PRESSURE POT OUTFITS

Pot size : 2L

$325.00

Price $235.00 $235.00 $235.00 $235.00 $235.00 $235.00

TOUCH UP GUN

Nozzle size : 1.2mm Spray pattern : 360mm Includes : Gun, hoses, pot, regulator, stainless steel nozzle and needle • General purpose high volume spray outfits are ideal for spraying on large surfaces and mass production. For use with all conventional enamels, lacquers and sealers.

S770-2QP

Spray Pattern 280-285mm 280-285mm 280-285mm 280-285mm 280-285mm 280-285mm

Pot size : 250ml Nozzle size : 1.4mm Spray pattern : 120mm Includes : Gun, pot, stainless steel nozzle and needle • Ideal for custom designing, auto touch-up work, detail spray work and stencil spraying

S770-10QP

Pot size : 10L

$649.00

SJ108

Part No. Nozzle Size Spray Pattern SG-EVO106FG-013 1.3mm 280-330mm SG-EVO106FG-014 1.4mm 280-330mm SG-EVO106FG-018 1.8mm 280-330mm SG-EVO106FG-020 2.0mm 280-330mm SG-EVO106FG-025 2.5mm 280-330mm

Price $270.00 $270.00 $270.00 $270.00 $270.00

Price $260.00 $260.00 $260.00 $260.00 $260.00

GRAVITY FEED TOUCH UP GUNS Includes : Gun, pot, stainless steel nozzle and needle • Ideal for custom designing, auto touch-up work, detail spray work and stencil spraying

Part No. Nozzle Size Spray Pattern Price S106T-05G 0.5mm 95mm $145.00 S106T-08G 0.8mm 95mm $145.00 S106T-10G 1.0mm 95mm $145.00

$120.00

Air Accessories AIR FILTER REGULATORS

AIR FILTER REGULATOR & LUBRICATORS With all of the features of the standard Groz air filter regulator and air lubricator • Come complete with a wall mounting bracket

ALL GROZ FILTERS FEATURE HIGH QUALITY 40 MICRON SINTERED BRONZE ELEMENTS TO GIVE YOUR TOOLS OPTIMAL PROTECTION

• 7 - 145 PSI range • Includes gauge & bracket • Large range of filters / regulators / lubricators available

GZ-60323 • Intermediate • 1/4" port

$81.50

GZ-60324 • Intermediate • 3/8" port

$81.50

GZ-60325 • Standard • 1/2" port

$120.00

GZ-60421

• Intermediate • 1/4" port

GZ-60406

• Intermediate • 3/8" port

GZ-60407

• Standard • 1/2" port

$155.00 $155.00 $215.00

FREIGHT CHARGES MAY APPLY. PRICES INCLUDE GST

DIGITAL PRESSURE GAUGE Maximum pressure : 300 PSI (20 BAR) Measuring range : 0 to 150PSI, 0 to 10 BAR, 0 to 1.0 MpA, 0 to 10 Kg/Cm2 Minimum reading : 0.1 PSI, 0.01 BAR, 0.001 MpA, 0.01 Kg/Cm2 • For use with miniature, intermediate & standard • Compared to a mechanical gauge, the digital gauge offers higher accuracy, higher pressure, better resistance to vibration & easier reading (back lit) • Square body 30mm2 with cast aluminium centre back male threads

GZ-60632

$105.00

Air Accessories AIR MANIFOLDS BARE UNIT

AIR MANIFOLDS WITH STANDARD COUPLERS

Input : 1/4" Output : 1/4"

Input : 1/4" Output : 1/4" • Includes NC20PM plug

AIR MANIFOLDS WITH QUICK ACTION COUPLERS

SINGLE ACTION COUPLERS

Input : 1/4" Output : 1/4" • Includes NC20PM plug

SMT-3B SMT-3S Part No. Description Price SML-2B 2 Way $6.50 SMT-3B 3 Way $8.00 SMM-4B 4 Way $10.00 SMX-5B 5 Way $12.00

FROM

$6.50

SAFETY LOCKOUT VALVES • 2 positions, supply or exhaust • 145 PSI Maximum pressure

SMT-3

Part No. Description Price SML-2S 2 Way $20.00 SMT-3S 3 Way $28.00 SMM-4S 4 Way $25.00 SMX-5S 5 Way $38.50

IN LINE MOUNTABLE 4 WAY AIR MANIFOLD Input : 1/2" Output : 1/4" • 2, 3 & 5 way also available

FROM

$20.00

Y INLINE 3 WAY AIR MANIFOLD Input : 1/4" Output : 1/4" • Single action couplers • Include NC20PM plug • 2 way also available

FROM

Part No. Description Price SML-2 2 Way $30.00 SMT-3 3 Way $41.00 SMM-4 4 Way $75.00 SMX-5 5 Way $59.00

FROM

$30.00

3 WAY SWIVEL AIR MANIFOLDS Input : 1/4" female Output : 1/4" • Single action couplers • Include NC20PM plug • 2 way also available

$61.00

SINGLE ACTION COUPLERS

Part No. Description Price GZ-60721 1/4" $61.00 GZ-60723 3/8" $78.50 GZ-60724 1/2" $99.00

SM4BA

$70.50

SINGLE ACTION COUPLERS

PLUG COUPLERS

MALE THREAD Part No. Thread Size NC20PM 1/4" NC30PM 3/8" NC40PM 1/2"

Price $2.50 $3.40 $4.60

FEMALE THREAD HOSE TAIL Part No. Thread Size NC20PF 1/4" NC30PF 3/8" NC40PF 1/2"

Price $3.30 $3.60 $4.60

Part No. Hose Size NC20PH 8mm NC30PH 10mm NC40PH 12mm

Price $3.30 $3.60 $4.60

SMY-3

$38.00

SRT-S13

$45.00

PREMIUM POLYURETHANE RECOIL AIR HOSE • Include single action fittings • Blue colour

FROM

$22.50

SOCKET COUPLERS

MALE THREAD Part No. Thread Size NC20SM 1/4" NC30SM 3/8" NC40SM 1/2"

Price $11.00 $11.00 $11.50

FEMALE THREAD HOSE TAIL Part No. Thread Size NC20SF 1/4" NC30SF 3/8" NC40SF 1/2"

Price $10.50 $11.00 $12.00

Part No. Hose Size NC20SH 8mm NC30SH 10mm NC40SH 12mm

Price $11.00 $11.00 $12.00

SINGLE ACTION COUPLERS

Part No. HUZ5508-05BS HUZ5508-05BS HUZ6510-05BS HUZ6510-10BS HUZ8012-05BS HUZ8012-10BS

Internal Outside Working Price Diameter Diameter Length 5.5mm 8mm 5m $22.50 5.5mm 8mm 10m $29.00 6.5mm 10mm 5m $26.00 6.5mm 10mm 10m $36.50 8mm 12mm 5m $32.50 8mm 12mm 10m $47.00

MULTIFLEX AIR HOSE

MINI LUBRICATOR

LUBRICATION KIT

AIR TOOL OIL

General Purpose Air Hose - 230PSI Diameter : 10mm Length : 20m • Complete with couplers

Thread size : 1/4" Oil capacity : 8 c.c. • Inline oiler to provide automatic lubrication of the air tool

• Includes applicator • 100ml

• Specially formulated lubricant with anti wear additives • For use in all air tools • High resistance to water contamination • Contains no zinc additives • Light viscosity (ISO 10) for max performance

NH10X20C/W 24

$52.50

M7A-SW1214

$9.40

M7-SG101

$36.50

FREIGHT CHARGES MAY APPLY. PRICES INCLUDE GST

Part No. M7-SO1005 M7-SO1010 M7-SO1050 M7-SO1200

Size 500ml 1L 5L 20L

Price $10.50 $15.50 $67.50 $205.00

Parts Cabinets

A4 SERIES 37

• Highest quality & heavy duty, robust parts cabinets designed for industrial use • Metal frame construction using 0.8mm galvanised steel • Large range of sizes and styles • Drawers come with dividers & contents description slip • Additional dividers available in packs of 10 Part No. PB-A4DIVIDER PB-A5DIVIDER PB-A6DIVIDER PB-A7DIVIDER PB-A8DIVIDER PB-HDDIVIDER

Description 10x A4 Series Dividers 10x A5 Series Dividers 10x A6 Series Dividers 10x A7 Series Dividers 10x A8 Series Dividers 10x HD Series Dividers

Price $4.80 $4.80 $4.80 $4.80 $4.80 $5.90

325 230 • Ideal for storing A4 documents • Transparent drawers • Slots for 3x dividers • 1x divider supplied per drawer

Divider

543W x 340D x 738H

$185

.00

289

PB-A5324

PB-A5336

586W x 290D x 350H

586W x 290D x 640H

586W x290D x 937H

36 DRAWERS

24 DRAWERS

$415

$505

.00

PB-A5336D

36 DRAWERS

586W x 340D x 970H with doors

$695.00

248 150

PB-A6212H

PB-A6330H

PB-A6330HD

533W x 265D x 310H

362W x 265D x 571H

533W x 265D x 937H

533W x 313D x 970H

$225

.00

12 DRAWERS

$280

• Small capacity drawers suitable for a large range of small components • ABS high strength plastic drawer. Oil, acid & impact resistant • Transparent PS plastic window • 10kg capacity per drawer • Ideal for workshop use • Slots for 3x dividers • 1x divider supplied per drawer

30 DRAWERS

$440

.00

A7 SERIES

.00

30 DRAWERS

$715.00

218 120

PB-A7448D

586W x 222D x 350H

444W x 222D x 642H

586W x 222D x 937H

586W x 270D x 970H

24 DRAWERS

$305

105 375

164

PB-A7448

$235

$635.00

• 30 drawer • 980W x 400D x 1010H mm

PB-A7324

.00

PB-THD2S

MOBILE PARTS CABINET

PB-A7416

16 DRAWERS

$185.00

Metal frame construction using 0.8mm galvanised steel • Lockable doors • 2 movable shelves • 880W x 400D x 880H

PB-A6309H

9 DRAWERS

PB-W6045

LOCKABLE CABINET

• ABS high strength plastic drawer. Oil, acid & impact resistant • Transparent PS plastic window • 10kg capacity per drawer • Ideal for workshop use • Slots for 3x dividers • 1x divider supplied per drawer

$425.00

For use with 2x PB-A7448 or 2x PB-A8560 • Load capacity 300kg • 100mm heavy duty castors - 2x swivel lockable, 2x fixed • 596W x 454D x 160H

163

A6 SERIES

30 DRAWERS

MOBILE BASE

PB-A5312

$255

285W x 340D x 483H

• Large capacity • ABS high strength plastic drawer. Oil, acid & impact resistant • Transparent PS plastic window • 10kg capacity per drawer • Ideal for workshop use • Slots for 5x dividers • 1x divider supplied per drawer

.00

PB-A4230P

10 DRAWERS

A5 SERIES

12 DRAWERS

PB-A4110P

.00

48 DRAWERS

$475

.00

48 DRAWERS

$650.00

FREIGHT CHARGES MAY APPLY. PRICES INCLUDE GST

PB-NHD530

$985.00

A8 SERIES

ST1 SERIES - 75 DRAWER

• Small capacity drawers suitable for a large range of small components • Full ABS high strength plastic drawer. Oil, acid & impact resistant • 10kg capacity per drawer • Slots for 3x dividers • 1x divider supplied per drawer

55 218 90 • Small capacity drawers suitable for a large range of small components • Full ABS high strength plastic drawer. Oil, acid & impact resistant • 10kg capacity per drawer • Slots for 3x dividers • 1x divider supplied per drawer • 586W x 222D x 937H

70 218 90

PB-A8416

PB-A8432

PB-A8560

16 DRAWERS

32 DRAWERS

60 DRAWERS

$220

$350

$520.00

466W x 222D x 350H

466W x 222D x 642H

.00

586W x 222D x 937H

ST2 SERIES - 60 DRAWER

HD SERIES

• ABS high strength plastic drawer. Oil, acid & impact resistant • Transparent PS plastic window • Anti-drop design for added safety • 25mm galvanised shelf for extra strength • 20kg capacity per drawer • Slots for 7x high impact dividers • 2x high impact dividers supplied per drawer

105

218 375

120

PB-HD515

PB-HD318

550W x 400D x 440H

880W x 400D x 440H

550W x 400D x 880H

$260

15 DRAWERS

$440

.00

18 DRAWERS

$600.00

Workshop Storage

HB SERIES PARTS BINS

Price $3.20 $5.40 $10.50 $18.50

PB-LP455455 PB-LP455610 PB-LP455914 26

• 690W x 560D x 1460H Features: • Double sided, heavy duty design • 4x Swivel castors, 2 locking • Can be expanded with more small & medium sized parts bins • Optional punched panel available for storage of other items on peg hooks (PB-HP068630) Includes: • 1x Mobile Stand (PB-MS630) • 20x Small Parts Bins (PB-HB1218) • 20x Medium Parts Bins (PB-HB1525) (colours may vary) • 9x Parts Bin Hang Panels (PB-MSHP06-5) 8x yellow PB-HB1218Y shown with raiser columns (included)

PB-MS201215

$525.00

• 1.2mm metal frame construction • 200kg total load capacity

TO SUIT HB SERIES PARTS BINS

.20 $17 Part No.

$395.00

ULTRA HEAVY DUTY TOOL CARTS

LOUVRE PANEL • Metal construction • 455W x 455H

PB-ST2460

HB SERIES PARTS BIN MOBILE STAND

• Holds up to 100kg when stacked with raiser columns • Blue colour Includes: • 1x Indication label • Back to back linker • 4x Raiser columns

Part No. Width x Depth x Height PH-HB1218B 121 x 180 x 84mm PH-HB1525B 150 x 265 x 121mm PH-HB2035B 308 x 353 x 155mm PH-HB3045B 300 x 480 x 178mm

164

PB-HD309

9 DRAWERS

$490.00

PB-ST1575

• Adjustable height of each layer • Each shelf & drawer includes a 3mm anti-slide EVA cushion

Parts bins not included

Width x Height 455mm x 455mm 455mm x 610mm 455mm x 914mm

Price $17.50 $23.50 $35.50

PB-CT5086 TOOL CART

873W x 500D x 880H

PB-CTH5086 TOOL CART WITH SIDE PANELS

PB-CTCH5086 TOOL CART WITH LOCKABLE DRAWERS

$375

$450

$755.00

.00

873W x 500D x 880H

FREIGHT CHARGES MAY APPLY. PRICES INCLUDE GST

.00

873W x 500D x 880H

Engineering Tools

OCTAGONAL COLD CHISELS WITH GRIP

Dimensions 250 x 19mm 300 x 19mm 250 x 25mm 300 x 25mm

Price $17.50 $25.00 $18.50 $28.50

OCTAGONAL COLD CHISELS

Part No. GZ-32800 GZ-32801 GZ-32802 GZ-32803 GZ-32804 GZ-32805 GZ-32818 GZ-32825 GZ-32826 GZ-32812 GZ-32823 GZ-32814

Dimensions 125 x 6mm 125 x 8mm 140 x 10mm 150 x 13mm 163 x 16mm 175 x 19mm 200 x 13mm 200 x 19mm 250 x 19mm 300 x 19mm 250 x 25mm 300 x 25mm

COLD CHISEL SET

GZ-32830

$32.00

STEEL PUNCHES

NUMBER STAMPS

Price $4.60 $4.60 $5.40 $5.80 $7.30 $9.40 $7.50 $9.50 $10.50 $11.50 $17.50 $21.50

Part No. Size GZ-25902 3mm GZ-25903 4mm GZ-25904 5mm GZ-25905 6mm GZ-25906 8mm GZ-25907 10mm GZ-25908 12mm

Price $11.50 $12.50 $16.50 $21.00 $29.50 $35.50 $64.00

Part No. Size Price GZ-26102 3mm $35.00 GZ-26103 4mm $36.50 GZ-26104 5mm $49.50 GZ-26105 6mm $63.50 GZ-26106 8mm $87.50 GZ-26107 10mm $105.00 GZ-26108 12mm $190.00

HOLLOW & ARCH PUNCHES

• High quality carbon steel • Accurately hardened to BS 3066 specification • 52 - 58 HRC cutting edge

For punching round holes in gasket material, leather, rubber, canvas, cardboard, plastic & other soft material.

HOLLOW PUNCH SET • 6 piece set including 5, 6, 8, 10, 11, 12mm

Blade Width Price 75mm $28.50 100mm $32.50

BRICK BOLSTER WITH GRIP

GZ-26391

$47

.00

Blade Width 75mm 100mm

Price $35.50 $38.00

GZ-26441

PIN PUNCHES • Hardened and tempered carbon steel • 6 piece set including 2.4mm (3/32"), 3mm (1/8"), 4mm (5/32"), 5mm (3/16"), 6mm (1/4"), 8mm (5/16")

GZ-25612

$36.00

• Cold Chisels: 150 x 13mm, 163 x 16mm, 175 x 19mm • Centre Punch: 5/32" • Pin Punches: 1/8", 3/16", 1/4" • Starting Punches: 3/16"

• Cold Chisels: 140 x 10mm, 150 x 13mm, 163 x 16mm, 175 x 19mm, 190 x 22mm • Centre Punches: 5/32", 1/4" • Pin Punches: 1/16", 1/8", 3/16" • Drift Punches: 1/8", 5/32" • Starting Punches: 5/16", 1/8"

GZ-33000

$47.00

GZ-33001

26 PIECE SET

$89.00

16 PIECE SET

• Cold Chisels: 125 x 6mm, 125 x 8mm, 140 x 10mm, 150 x 13mm, 163 x 16mm, 175 x 19mm, 190 x 22mm, 200 x 25mm, 300 x 13mm • Centre Punches: 5/32", 1/4", 3/8" • Pin Punches: 3/32", 1/8", 5/32", 3/16", 1/4", 3/8" • Starting Punches: 1/16", 1/8", 3/16", 1/4" • Drift Punches: 1/8", 3/16", 1/4" • Prick Punch: 5/32"

• Cold Chisels: 125 x 8mm, 150 x 13mm, 163 x 16mm, 175 x 19mm, 200 x 22mm • Centre Punches: 1/8", 5/32", 1/4" • Pin Punches: 1/8", 3/16", 1/4" • Drift Punches: 3/16", 1/4" • Starting Punches: 1/8", 3/16", 1/4"

GZ-33004

GZ-33002

$180.00

$100.00

24 PIECE SET

ARCH PUNCH SET • 7 piece set : 6, 10, 12, 16, 19, 22, 25mm

Part No. GZ-32621 GZ-32622

14 PIECE SET

LETTER STAMPS

BRICK BOLSTER

Part No. GZ-32601 GZ-32602

8 PIECE SET

• 6 pce, 125x6mm, 125x8mm, 140x10mm, 150x13mm, 163x16mm & 175x19mm

• High quality forged alloy steel • Available with polypropylene hand guards

Part No. GZ-32841 GZ-32843 GZ-32842 GZ-32844

Punch & Chisel Kits

• Cold Chisels: 125 x 6mm, 125 x 8mm, 140 x 10mm, 150 x 13mm, 163 x 16mm, 175 x 19mm, 190 x 22mm

$105.00

EXTRA LONG PIN PUNCHES • 200mm OAL • 5 piece set : 3mm (1/8"), 5mm (3/16"), 6mm (1/4"), 8mm (5/16"), 9.5mm (3/8")

GZ-25655

$51.00

GZ-33003

$130.00

• Starting Punches: • Centre Punches: 1/16", 1/8", 5/32", 5/64", 5/32", 1/4" 3/16”, 3/16", 1/4", • Pin Punches: 1/16", 3/32", 1/8", 5/32", 5/16" 3/16", 1/4", 5/16"

CENTRE PUNCHES

NAIL PUNCHES

• Hardened and tempered carbon steel, designed for demanding industrial use • 5 piece set : 2mm (5/64"), 3mm (1/8"), 4mm (5/32"), 6mm (1/4"), 9.5mm (3/8")

• Hardened and tempered high grade carbon steel • 9.5mm (3/8") square head • 3 piece set : 0.8mm (1/32"), 1.6mm (1/16"), 2.4mm (3/32")

GZ-25205

$37.00

FREIGHT CHARGES MAY APPLY. PRICES INCLUDE GST

GZ-25366

$14.00

Vices PROFESSIONAL MECHANICS BENCH VICES • Rugged all cast iron construction • Integrated anvil for shaping and beating • Extra heavy-duty sliding jaw Part No. Jaw Width TM100-075 75mm TM100-100 100mm TM100-125 125mm TM100-150 150mm TM100-200 200mm

Weight 7.5kg 10.0kg 15.5kg 18.0kg 31.0kg

SWIVEL BASES Part No. TM110-075 TM110-100 TM110-125 TM110-150 TM110-200

To Suit TM100-075 TM100-100 TM100-125 TM100-150 TM100-200

Price $78.50 $112.00 $162.00 $195.00 $285.00

• To suit mechanics bench vices

Price $7.50 $15.90 $16.50 $20.00 $26.50

FABRICATED STEEL BENCH VICES • Extra heavy-duty • Precise sliding jaw

• Precision machined knurled jaws with V-Groove • Large diameter screw

STRAIGHT JAW Part No. Jaw Width TM102-100 100mm TM102-125 125mm TM102-150 150mm TM102-200 200mm

Weight 10.5kg 18.5kg 22.6kg 37.0kg

OFFSET JAW Price $142.00 $240.00 $285.00 $492.00

Part No. Jaw Width TM104-100 100mm TM104-125 125mm TM104-150 150mm TM104-200 200mm

STANDARD DRILL PRESS VICES • Cast iron body • Machined steel jaws • Great for machine shops, fabrication workshops & tool rooms

Weight 11.2kg 20.3kg 25.0kg 60.0kg

HEAVY DUTY DRILL PRESS VICES

Price $145.00 $279.00 $302.00 $785.00

UNIVERSAL DRILL PRESS VICES • Unigrip • Graded cast iron

• 3 Way vice

GZ-35125 3 Way Drill Press Vice

FROM

$42.00

Part No. Jaw Width Jaw Height Capacity Weight Price VDP102 102mm 21mm 105mm 3.2kg $42.00 VDP150 150mm 28mm 150mm 7.2kg $70.00

Products imported and distributed nationally by Industrial Tool & Machinery Sales. Advertised prices include GST. Freight charges may apply on some products to some areas. Prices and specifications subject to change without notice. OFFER VALID TO 31st March 2018

FROM

$85.00 Part No. Jaw Width Jaw Height Capacity Weight Price VDPL100 100mm 30mm 92mm 6.75kg $85.00 VDPL155 150mm 36mm 140mm 13kg $130.00

Part No. Jaw Width Jaw Opening Jaw Depth Price GZ-35120 80mm 75mm 30mm $105.00 GZ-35121 100mm 92mm 30mm $130.00 GZ-35122 120mm 110mm 35mm $200.00

3 WAY DRILL PRESS VICE

Part No. Jaw Width Jaw Opening Jaw Depth Price GZ-35125 100mm 88mm 30mm $175.00