HP
HP0-J23 Implementing MSA Storage Solutions
http://killexams.com/exam-detail/HP0-J23
QUESTION: 184
What is an advantage of iSCSI when compared to Fibre Channel?
A. Less protocol overhead B. No additional customer knowledge required C. Easily provisioned through HP Storage Essentials SRM D. Existing Ethernet infrastructure can be used to create a SAN
Answer: D
QUESTION: 185 DRAG DROP Match each MSA2000 RAID level with its description?
Answer:
QUESTION: 186 DRAG DROP Match each customer requirement with the appropriate HP StorageWorks solution?
65
Answer:
Explanation:
QUESTION: 187
Where is the parity data stored in RAID 5 array?
A. On the spare disk B. On the first disk of the array
66
C. Across all disks of the array D. On a dedicated parity disk
Answer: C
QUESTION: 188
What is an MSA2000 virtual disk?
A. A group of disk drives configured as any RAID set B. A group of disk drives with a maximum capacity of 2TB C. A logical unit created from a storage pool of contiguous blocks D. A logical unit consisting of up to eight drives in a RAID 5 configuration
Answer: A
QUESTION: 189 DRAG DROP Match each data protection method with its description?
Answer:
67
Explanation:
QUESTION: 190
What are four components of a SAN? (Select four)
A. NIC B. MSA C. NSR D. FCA HBA E. SCSI HBA F. Smart array 4200 G. Brocade switch 2/32
Answer: B, C, D, G
QUESTION: 191
What is needed to connect an Ultrim tape device to the SAN?
68
A. OID B. NSR C. FCIP D. SCSI hub E. iSCSI bridge
Answer: B
QUESTION: 192
Which business advantage does Storage Virtual Replicator offer?
A. Online volume growth B. Dynamic disk utilization C. Automatic defragmentation D. Volume configurations across controllers
Answer: A
QUESTION: 193
You are using Storage Virtual Replicator. When is the size of a segment determined?
A. When a virtual disk is created B. When a storage unit is created C. When a storage pool is created D. When physical disks are combined to form any array
Answer: C
QUESTION: 194
In Storage Virtual Replicator, what is grouped togather to form segments?
A. Frames B. Partitions C. Disk block numbers D. Logical block numbers
Answer: A
69
QUESTION: 195
Which configurations are supported in an MSA2012i storage solutions? (Select Three)
A. One topology B. 1 Gbit/sec Ethernet C. Various link speeds D. Choice of topologies E. Direct attachment to hots F. No host port interconnects
Answer: B, D, F
QUESTION: 196
What are key features of the MSA2012fc? (Select Three)
A. Dual-ported SATA drives B. Supported for up to 64 hosts C. Support for upt to 64 drives D. Snapshot and clone capability E. Controller-based replication capability F. Ability to mix SAS and SATA drives within the same drive enclosure
Answer: B, D, F
70
For More exams visit https://killexams.com/vendors-exam-list
Kill your exam at First Attempt....Guaranteed!