CUSTOMISE PERSONALISE PROTECT ACCESSORISE
ACCESSORIES Rear Disk Guard
Two piece design that prevents damage to the rear brake disk particularly when crossing obstacles such as logs or rocks | Manufactured from a combination of 6061 aluminium billet and 5083 aluminium plate | Available for CRF-X models only
RADIATOR GUARDS
CRF Racing Pivot Pegz
Case Saver
Excellent side impact protection | Front & rear brace | High quality finish
World #1 high performance pivoting foot peg | 60mm wide | Enhanced bike feel & control | Easier gear shifts & rear brake access | Adjustable height & pivot range | Made in Australia
Protection for your engine in the event of chain breaks or derailment | Machined from billet aluminium |Available with or without sprocket cover
Clutch Cover
Machined from 6061 grade aluminium billet | Finished with a black hard anodizing for greater wear resistance
Rear Master Cylinder Protector
Gear Lever Protector
Skid Plate
Tyre Lever Set
Designed to protect the stator cover from being damaged by the gear lever when the bike is dropped | Machined from 6061 aluminium billet | Anodized in either red or black.
Made from 4mm 5083 H32 aluminium | Quality stainless steel brackets | Easy, single bolt removal
Laser cut from 250 grade steel | Case hardened enough to protect them bending but no enough to make the tip brittle | Zinc passivated resulting in a silver finish | Laser engraved with the ‘CRF Racing’ logo.
Bash Plate
Speedometer Protector
Rear Caliper Protector
Clutch Cover Guard
Made from 4mm 5083 H32 aluminium | Quality stainless steel brackets | Easy, single bolt removal
The main body of the speedometer protector is machined from 6061 aluminium billet | Anodized red | Available for CRF-X 2010 ~ models only
Designed to prevent damage to the brake slave cylinder if the bike is dropped, it also prevents a loss of rear brake from having the slave cylinder depressed by obstacles | Machined from 6061 aluminium billet | Anodized red | Available for CRF-X models only
Economical alternative to replacing the clutch cover | Offers excellent protection to the stock clutch cover in its most vulnerable areas. | Machined from 6061 aluminium billet | Anodized in either red or black |Available for CRF-X models only
Designed to prevent damage to the rear master cylinder if the bike is dropped | Also provides cover to the oil sight glass | Machined from 6061 aluminium billet | Anodized in red | Available for CRF-X models only
ACCESSORIES
Rear Brake Adjuster Clevis
Front Wheel Spacer Set
Red alloy rear brake clevis | Features engraved ‘HRC’ logo
Red alloy front wheel spacer set
Oil Level Gauge
Magnesium ACG Cover
Clutch Cover
Red alloy dipstick oil filler plug
Using magnesium as the material for this ACG Cover reduces weight 190 grams compared to the standard-equipment part | The white colouring and the red Honda logo add a factory flourish
This aluminium Clutch Cover employs a three-dimensional, curved surface to create a compact feel | A tough, white coating makes it easier to remove scratches or wipe away stains | Features red ‘Honda’ logo
Front Brake Line Clamp
HRC Skid Plate Alloy Skid Plate | Features laser embossed ‘HRC’ logo into plate
Titanium/Carbon Full Exhaust System
Front Engine Hanger
Red alloy front brake hose clamp | Features engraved ‘HRC’ logo
Engine Cover Inspection Plugs Red alloy engine cover inspection plugs | Features engraved ‘HRC’ logo
Front Master Cylinder Cap
Rear Master Cylinder Cap
Red alloy front master cylinder brake cap | Features engraved ‘HRC’ logo
Red alloy rear master cylinder brake cap | Features engraved ‘HRC’ logo
Incorporates titanium for the exhaust pipe and the front of the silencer, and carbon fibre for the silencer body | Total weight reduction comes to 707 grams, cutting 227 grams from the exhaust pipe area and 480 grams from the silencer | Features ‘HRC’ logo
Rear Wheel Spacer Set Red alloy rear wheel spacer set
Improves front wheel feel and cornering | Made from duralumin, which is stronger and lighter than aluminium | Features a red aluminite finish for increased durability | Features ‘HRC’ logo
Aluminium Throttle Tube
Oil Filler Cap
Coloured Head Cover
Triple Clamp
Red alloy rear axle quick adjust block
Alloy throttle tube to replace standard plastic unit
Red alloy oil filler cap | Features engraved ‘HRC’ logo
Red coating (same as coating on engine Type R, S2000)
The use of duralumin (an alloy of aluminium that contains copper, manganese, magnesium, iron and silicon) in place of the aluminium used in the standard-equipment triple clamp effects an 80-gram weight reduction while securing equivalent strength | The facing uses black alumite treatment and wears the HRC logo
Sprocket Cover
Aluminium Fuel Tank
Radiator Brace
Made from duralumin, which is stronger and lighter than aluminium | Features a red aluminite finish for increased durability | Features ‘HRC’ logo
1.1 Litre larger than standard factory fuel tank
Increases radiator protection in case of side impact | Made from duralumin
Enviro Safe Work Mat
HONDA RACING WORK STAND
Quick Adjust Axle Blocks
Dimensions: 178 cm x 130 cm | Polyester, Honda wing / HRC branded foam padded work mat | Anti-slip material pad in the centre protects against paddock stand scuff marks | Washable and easy to store | Complies to environmental regulations
Constructed from strong, lightweight aircraft aluminium (6061 Tube / 5052 Plate) | Unique block design allows all 2010 to 2012 CRF250R & CRF450R models to sit level on the stand | Durable red powder-coated finish | Heavy duty EPDM top pad
Rear Master Cylinder Guard Alloy rear brake master cylinder guard | Embossed with ‘HRC’ logo
Oversized Handlebar Holder Kit Red Alloy | Features engraved ‘HRC’ logo | Designed to fit oversize ‘fat’ bars | Available for CRF250R & CRF450R. CRF450R set offers offset options.
For your peace of mind Honda Genuine Accessories are carefully designed, researched and stringently tested to the highest standards. And since they’re Honda approved you’ll know that they’re just as tough and well made as your Honda motorcycle.
Visit: http://www.hondacatalogue.com.au
HPA14688
All CRF Racing Accessories are proudly designed and manufactured in Australia.