Teng Tools - June - July 2019 by Riverland Steel

TAX TIME

JUNE - JULY 2019

Get organised

12 Drawer Metric/AF Tool Kit • 1/4" 3/8" & 1/2" dr • 141 Sockets & socket accessories • 4mm-32mm & 3/16" to 1-1/4" • 20 combo

Pieces

2350

spanners 8-19mm & 5/16"-3/4" • 15 screwdrivers • Ratcheting s/driver set • 8 pliers • Metric & AF T-handle hex keys • 1/2" dr torque wrench • 1/2" dr breaker bar • 1/2" dr impact driver set • Deluxe pry bar set • Utility knife, hacksaw • Hammers, tape measure, steel rule • General tool kit & so much more.

FULL DEPTH TOP BOX

316

SEE PAGES 4, 5, 6 & 7 FOR MORE GREAT TOOL KIT BARGAINS

SBOXV

SAVE OVER $ 650

SERIES

GAS STRUT LID BALL BEARING SLIDES

1/4” 3/8” 1/2”

DRIVE

Part No. TCM316SVBK

available in RED

RATCHET COMBINATION SPANNER SET

HIP GRIP NON SLIP

1/4” DR METRIC/AF STANDARD & DEEP SOCKET SEt

• All sizes from 10-19mm • Reverse ratchet action • Supplied in a handy tool roll

• Regular 1/4”dr sockets metric sockets 4-13mm • AF 3/16”- 1/2” • Deep 1/4”dr sockets metric 6-13mm • AF 1/4”- 1/2” • Bits sockets Hex, TX, PH • Flip reverse ratchet & spinner handle with accessories • HEX, TX, Flat, PH & PZ bits with adaptor Part No. T1460

Piece

Part No. 6510RMM

149

HALF PRICE

Piece

NEW

1/4"

119

SAVE 35%

Click Lock

3 DRAWER ROLLING MECHANIC’S SEAT

• Capacity 182KG • 3 Drawer tool chest with ball bearing slides • 2 Fold-down side trays with magnetic pads • Thick padded seat cushion REAR TRAY FOR • Maximum drawer capacity 9.7Kg ADDITIONAL STORAGE

THICK PADDED SEAT

Part No. PE1020

3 DRAWERS WITH SMOOTH ROLLER BEARING

COMPACT STORAGE FOLDABLE MAGNETIC TOOL TRAYS

189

SwIVEL CASTERS SOLID PVC OVERSIZED CASTERS

BUILD YOUR TOOL KIT BUY ANY 3 TT KITS AND GET A FREE TC-3 CARRY CASE 35 pce 1/4” DR METRIC SOCKET SET

• 8-22mm, uni joint, extension bar 75mm, 10” rotating spinner handle

• Deep: 6-13mm Reg: 4-13mm, bits: TPX, HEX, PH, PZ, Flat

Part No. TT917N

• TT-MV steel blade, Flat, PH, & PZ drive heads

7 pce T-HANDLE HEX SET Part No. TTHEX7

115

Part No. TT3819

Part No. TT1435

7 pce screwdriver set

19 pce 3/8” DR METRIC SOCKET SET

7 PCE TX SCREWDRIVER SET

• Sizes: 2.5-8mm, Ball point head • Chrome-moly alloy

Part No. TT3816

• Deep: 7-22mm, 6 point • Chrome vanadium

53 pce impact BITS Part No. TTBS53

119

28 pce HEX & TX KEY SET

Part No. TTTX7

• TX/TPX10 - TX/TPX40 For internal TX heads • Chrome-moly alloy

Part No. TTXPB3

• Sizes: 300, 400 and 500mm. Round, ground point at one end - flat hook shaped pry bar at the other.

4 PCE 9” CIRCLIP PLIER SET • 2 straight, 2 bent for internal & external circlips

Part No. TTHT28

• 6 point sockets 3/16”-3/4” • Chrome vanadium

7 pce TX / TPX T-HANDLE SET

32 pce 1/4” & 3/8” DR AF STD & DEEP SOCKET SET Part No. TTAF32

• TT-MV steel blade, 2 TX & 5 TPX, for internal TX heads.

3 PCE ROLL HEAD PRY BAR SET

Part No. TTX474-9

16 pce 3/8” DR METRIC SOCKET SET

• HEX, TX, PH, PZ, ROB & PHG type, with nut setters, magnetic bits holder & quick chuck bit holder

Part No. TT917TXN

TAKE YOUR TOOLS ANYWHERE

• Sizes: MM: 1.5-10mm, AF: 5/64”-3/8”, TX: TX8-TX40.

49 Pce Quick Chuck Bits & Socket Set

Part No. TTMDQ49

• 2 long bits • Quick chuck driver • 72 teeth 1/4” DR ratchet head adaptor • HEX, TX, TPX, FLAT, PH, PZ & ROB type,

1/2” IMPACT DRIVER & BIT SOCKETS Part No. TTID20

• Adaptor 5/16” HEX 3/8”, 17 bits, Flat, PH, HEX, TX

3 PCE 'thru handle' pry bar set

Part No. TTXPB3A

• Size 12", 18", & 22" • Square shanked 'THRU HANDLES' with percussive end cap • Ergonomic handle moulded to protect hand WHACK EM WITH A HAMMER

135

41 Pce FLEXIBLE DRIVER SET Part No. TTXMD41N

• 560mm 1/4” flexible magnetic hex bit holder • 560mm 1/4” dr flexible spinner handle • 1/4” m x 1/4” hex adaptor • 1/4” dr sockets 4-13mm, bits 1/4” blade, PH, PZ, Hex & TX.

Choose Your Storage

35 pce 1/4” & 3/8” DR BITS SOCKET SET

Part No. TTBS35

• HEX, TX, PH, PZ & Flat type, 2 adaptor drive

4 pce PLIER SET Part No. TT440 -T

105

5 pce 1/2” DR RATCHET $ & ACCESSORY SET

17 pce 1/2” DR METRIC SOCKET SET

Part No. TT1205

Part No. TT1217

• 1/2” dr ratchet 5” & 10” extensions, 3/8”F:1/2”M, T bar adaptor, uni joint

110

• 10” water pump, 6” side cutter, 7” combo & 8” long nose pliers • Chrome vanadium steel

8 PCE HOOK & PIN WRENCH SET

Choose Your Tool Trays

175

Part No.TTHP08

• 3 pin adaptors and 2 spare pins • 3/4”-2”, 1 1/4”-3”, 2”-4 3/4”

4 pce 7” CIRCLIP PLIER SET

Part No. TT474-7

• 2 straight & 2 bent tip. External & internal circlips, fitted with return springs

81 pce nut rivet set Part No. TTNR81

189

11 PCE DOUBLE RING SPANNER SET Part No. TTX6311

Part No. TTX918N

• TT-MV PLUS steel blade, Flat, PH & 2 stubby screwdrivers • Two component handle with hanging hole

5 pce SELF-LOCKING $ PLIER SET Part No. TTVG05 • Release lever. 3 with serrated, adjustable jaws with pipe grip and cutters, 2 long nose

9 pce PUNCH & CHISEL SET

• 6 parallel pin punches, 2 cold chisels & a centre punch

195

• 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 24 x 27, 30 x 32mm • 12 point at each end.

8 PCE SCREWDRIVER SET

• 10-32mm socket set, 12 point • Chrome vanadium

Part No. TTPC09

• Rivnut gun, blind nuts M3, M4, M5, M6. 20 of each size.

Click Together

15 pce 1/2” DR AF SOCKET SET

Part No. TT1215AF

• 3/8”-1 1/4” socket set, 12 point • Chrome vanadium

12 pce METRIC COMBO SPANNER SET

Part No. TT1236

• 8-19mm, combination spanner 150 offset • Chrome vanadium

115

16 pce 1/2” DR IMPACT $ SOCKET SET Part No. TT9116

• Regular: 13-24mm, Deep: 13-24mm • Chrome molybdenum

7 PCE combination metric spanner set Part No. TTX2032

145

• Sizes 20-32mm, Chrome vanadium steel, 12 point ring end 150 offset. Satin finish

5 PCE FILE SET Part No. TTXF05

• 2nd cut, flat, hand, half round, round & three square • File length 250mm

EVA TOOL KITS available in RED

210

HIP GRIP NON SLIP

BEARING SLIDES

272

12 Drawer Metric EVA KIT

Pieces

• 107 sockets & socket accessories • 13 pce extension set • 22 pce combination spanners • 5 pliers • 16 pce s/driver set

FULL DEPTH TOP BOX

BALL

EVA

Part No. TCM210EVANBK

t r ay s

EVA t r ay s

FULL DEPTH TOP BOX

SERIES

BOX

1/4" 3/8" 1/2" DRIVE

GAS STRUT LID

available in black

1995

SAVE OVER $ 550 365

Pieces

FULL DEPTH TOP BOX

EVA t r ay s

SERIES BOX 1/4" 3/8" 1/2" DRIVE

GAS STRUT LID

2395

$ 12 Drawer metric/af EVA Kit • 153 sockets & accessories • Sockets: Std 4-24mm, 3/16” to 1-1/4”. Deep 4-19mm, 3/16” to 3/4” • 13 pce ext set • 2 torque wrenches 3/8” & 1/2” dr • 37 pce combo spanner set 5-32mm, 5/16” to 1-1/4” • 12 pce ratcheting metric combo spanners 8-19mm • 5 pce plier set • 27 s/drivers blade, PH, PZ, TX • 5 pce wheel nut socket set including 1/2” dr breaker bar • 3 IQ shifters and 1 extra wide opening shifter • Metric & AF hex keys, TX 6-40 keys, folding set (Hex, TX, Blade, PH & PZ) • T-handle hex keys TX/TPX/Hex • Pry bar & tyre lever set

SAVE OVER $ 800

408

Pieces

EVA FULL DEPTH TOP BOX

t r ay s

SERIES BOX 1/4" 3/8" 1/2" DRIVE

Part No. TCM365EVAN

GAS STRUT LID

available in black

available in RED

2990

3385

SAVE OVER $ 1000

SAVE OVER $ 1300

8 Series - 1 Pi - Com

8 Series Boxes - 1 Piece Chassis - Heavy gauge steel - Robust ball bearing slides - Combination locks for extra security

eces

EVA TOOL KITS

12 Drawer metric/af

• 153 sockets & accessories • 13 pce extension set • 37 pce combination spanner set • 5 pce plier set • 16 pce s/driver set

available in RED

338

Part No. TCM272EVAN

Pieces

FULL DEPTH TOP BOX

ay s

ERIES

EVA t r ay s

SERIES

12 Drawer metric/af EVA Kit

• 153 sockets & accessories • Sockets: Std 4-24mm, 3/16" to 1-1/4". Deep 4-19mm, 3/16" to 3/4" • 13 pce ext set • 2 torque wrenches 3/8" & 1/2" dr • 37 pce combo spanner set 5.5-32mm, 5/16" to 1-1/4" • 5 pce plier set • 16 pce s/driver set • 3 IQ shifters & 1 extra wide opening shifter • Metric & AF hex keys, TX 6-40 keys, folding set (Hex, TX, Blade, PH & PZ) • T-handle hex keys TX/TPX/Hex • Pry bar & tyre lever set Part No. TCM338EVANBK

BOX 1/4" 3/8" 1/2" DRIVE

ilable black

GAS STRUT LID

2650

eces

ay s

ERIES

SAVE OVER $ 900 12 Drawer metric/af EVA Kit

399

Pieces

• 153 sockets & accessories • Sockets: Std 4-24mm, 3/16” to 1-1/4”. Deep 4-19mm, 3/16” to 3/4” • 21 1/2” Dr metric impact socket set std & deep • 13 pce ext set • 2 torque wrenches 3/8” & 1/2” dr • 37 pce combo spanner set 5.5-32mm, 5/16” to 1-1/4” • 8 metric double ring spanners 6-24mm • 12 pce ratcheting metric combo spanners 8-19mm • 5 pce plier set • 27 s/driver blade, PH, PZ, TX • 5 pce wheel nut socket set including 1/2” dr breaker bar • 3 IQ shifters & 1 extra wide opening shifter • Metric & AF hex keys, TX 6-40 keys, folding set (Hex, TX, Blade, PH & PZ) • T-handle hex keys TX/TPX/Hex • 14 pce punch & chisel set • Pry bar & tyre lever set

EVA t r ay s

SERIES BOX

available in black

Part No. TCM408EVAN

9 drawer metric/af TECHNICIANS EVA Kit 53” WIDE WITH WORK BENCH TOP

4595

SAVE OVER $ 1000

• 174 sockets & accessories, Sockets: Std 4-24mm, 3/16” to 1-1/4” Deep 4-19mm, 3/16” to 3/4” • 13 pce ext set, 16 metric impact sockets 13-24mm std & deep, 4 impact accessories • 2 torque wrenches 3/8” & 1/2” dr • 37 combo spanners 5-32mm, 5/16” to 1-1/4”, 12 ratcheting metric combo spanners 8-19mm • 5 pce plier set • 14 pce punch & chisel set • 27 s/drivers blade, PH, PZ, TX • 5 pce wheel nut socket set including 1/2” dr breaker bar • 3 IQ shifters & 1 extra wide opening shifter • Metric & AF hex keys, TX 6-40 keys, folding set (Hex, TX, Blade, PH & PZ) • T-handle HEX/TX/TPX keys • Pry bar & tyre lever set Part No. TCM399EVA 5

1/4" 3/8" 1/2" DRIVE

TOOL KITS

THE

BALL

BEARING SLIDES

MONSTER MEGA MASTER TOP BOX

HIP GRIP NON SLIP

ROLL CAB

FULL DEPTH TOP BOX

9850

Spare deep drawer

SAVE OVER $ 3000

1200 Pieces

SERIES BOX

GAS STRUT LID

19 DRAWER METRIC/AF 53" wide DOUBLE STACK tool KIT

1/4" 3/8" 1/2" 3/4" DRIVE

• 1/4" 3/8" 1/2" & 3/4" dr • Sockets std, deep, TX, hex, slotted, PH, PZ, impact • 4 ratchets, 79 spanners • Ratchet combo spanners • 49 s/drivers • 74 pce ratchet s/driver set, 30 pliers • 2 torque wrenches • Nut drivers, rivet & riv-nut sets • Pry bars and roll/heel bars • Puller kit • Tap & die set, stud removers • Punch & chisel set • 5 locking pliers • 1000V pliers & s/drivers, crimping tool set • Oil service kit, files, hammers, hacksaw, shifters • General tool kit & much more. Part No. TCMONSTER03

TOP BOX

353

ROLL CAB

MIDDLE BOX

Pieces FULL DEPTH TOP BOX

SERIES BOX

1/4” 3/8” 1/2” DRIVE

715

Pieces

available in RED

SERIES BOX

GAS STRUT LID

1/4” 3/8” 1/2” 3/4” DRIVE

EXTRA DEEP DRAWER

3995

$ SAVE OVER $ 1000

2750

$ available in RED

19 drawer METRIC/AF MEGA MASTER tool kit

• 3/8” Dr TX, TPX & TX-E sockets • 1/2 dr std & deep sockets • 34 combo spanners AF/Metric 5/16” -1-1/4”, 8-32mm • 11 double ring spanners, 16 pliers, 22 s/drivers • Mini s/drivers & pliers • Ratcheting s/driver set • 14 T-handle Hex, TX / TPX keys • 13 pce extension set • 1/2” dr torque wrench • Pin punches, chisels • Impact driver, rivet gun • Nut-sert gun • Tap & die set • Pin & hook wrenches • Puller set, pry bars • Stud & nut remover set, oil service kit • Hex bits & TX bits • General tool kit & so much more Part No. TCMM715NBK 6

SAVE OVER $ 750

11 DRAWER METRIC/af tool kit

• 60 teeth ratchets • 141 Sockets & socket accessories 4mm to 32mm & 3/16" to 1-1/4" • 34 Combo spanners 8mm to 32mm & 5/16" to 1-1/4" • 15 s/drivers • 8 Pliers • Torque wrench • Breaker bar • Ratcheting s/driver kit • Impact driver set • Hex keys, 2 shifters, Locking plier • Utility knife, hacksaw • Hammers, tape measure, steel rule • General tool kit & so much more. Part No. TCMM353BK

8 Series - 1 Pi - Com

mm o

ule

8 Series Boxes - 1 Piece Chassis - Heavy gauge steel - Robust ball bearing slides - Combination locks for extra security

TOOL KITS

7 Drawer THE ‘COMMAND CENTRE’ Metric/AF Tool Kit

• 1/4”, 3/8” & 1/2” drives AF/Metric • Supplied in the new 37" roller cabinet • Wooden worktop included to create portable workstation • One drawer opening safety function • 5" castor wheels with brakes Part No. TCMM622N

3395

SERIES

622

SAVE OVER $ 1000

Pieces

DRIVE

BOX

1001 PCE

50% more space than a standard roller cabinet.

1/4” 3/8” 1/2”

TOP BOX

available in black

MEGA MASTER KIT

ROLL CAB

1001 Pieces

SERIES

19 drawer metric/af TOOL KIT

BOX

• 1/4", 3/8", 1/2" & 3/4" dr • Std, deep, flex, hex, TX, TPX, TX-E, impact sockets • 4 ratchets • 35 s/drivers • 74 pce ratchet s/driver set • 24 pliers • 2 torque wrenches • 69 spanners • Nut drivers • Rivet & riv-nut sets • Pry bars & roll heel bars • Puller kit • Tap & die set • Stud removers • Punch & chisel set • 1000V pliers & s/drivers • Crimping tool set • Oil service kit • General tool kit & so much more.

1/4” 3/8” 1/2” 3/4” DRIVE

MIDDLE BOX

Part No. TCMM1001N

4995

SAVE OVER $ 1500 SERIES

464

Pieces FULL DEPTH TOP BOX

GAS STRUT LID

BOX

1/4" 3/8" 1/2" DRIVE

available in black

4495

SAVE OVER $ 1000

14 drawer METRIC/af TOOL KIT WITH WORK BENCH TOP • 123 sockets & accessories • 34 combo spanners AF/Metric 5/16" to 1-1/4", 8-32mm • 17 pliers • 15 screwdrivers • 12 mini s/drivers • Ratcheting s/driver set • 14 T-handle hex key AF/Metric • 13 pce extension set • 1/2" dr torque wrench • 1/2" breaker bar • Deluxe pry bar set, pin punches, files, chisels, impact driver & rivet gun • General tool kit & so much more. Part No. TCMM464 7

TENG TOOLS SOCKET SETS

Piece

1/4"

CHEAPER THAN A RATCHET

Piece

1/4” DR SOCKET SET

1/4” dr FRP ratchet, 2” extn. Sizes: 4-13mm Composite carry case Part No. M1413N1

3/8

Piece

3/8” DR SOCKET SET

CHEAPER THAN A RATCHET

1/2"

1/2" DR SOCKET SET

3/8” dr FRP ratchet, 3” extn. Sizes: 8-19mm Composite carry case Part No. M3812N1

CHEAPER THAN A RATCHET

1/2" dr FRP ratchet, 5" extn. Sizes: 8-24mm Composite carry case Part No. M1212N1

315

Piece

315

1/4"

1/4” DR MINI SOCKET SET

• 72 teeth stubby ratchet with twist reverse • Sockets 5.5, 6, 7, 8, 10, 12, 13mm • Handy pocket sized click lock storage case (105x60x32mm) Part No. T1408

Piece

3/8

Click Lock

Piece

3/8" dr tool kit

FRP ratchet, socket & spanner sizes: 8-19mm, ext bars, spark plug sockets. Side cutter, combination, long nose, multigrip, locking plier, 6 s/drivers, 8" adjustable wrench. Part No. T3848

1/4"

1/4” HEX DR SET

325

Fine tooth mini ratchet, 4” adjustable wrench, 2” ext bar. Metric sockets: 4-13mm. Bits: blade, PH, PZ, TX. Part No. T1423

1/2"

Click Lock

1/2” dr tool kit

FRP ratchet. Spanners: 8-19mm. Sockets: 10-32mm, 6 s/drivers, side cutter, combination, long nose, water pump. 2-1/2” + 6” ext bars. Magnetic bits driver handle & bits Part No. T1268

455

1/4"

Piece

1/4" DR metric SET

FRP ratchet, uni joint, coupler adaptor, 3/8"F:1/4"M T-bar adaptor, 2" & 4" ext bar, std sockets: 4-13mm, deep sockets: 6-13mm. Part No. T1436

115

Piece

1/4" 1/2"

Click Lock

1/4" & 1/2" DR SOCKET SET

FRP ratchets & accessories. Spark plug sockets. PH, PZ & Flat screwdrivers & bits 8-17mm combination spanners Part No. TM095

165

$ 39

Piece

3/8

Click Lock

3/8" DR METRIC SET

FRP ratchet, uni joint, 6" ext bar, coupler adaptor 1/2"F:3/8"M T-bar adaptor, sockets: 8-22mm, deep: 8-19mm, spark plug sockets: 16 & 21mm. Part No. T3839

1/2" DR 30 PCE SOCKET SEt

Piece

111

Piece

1/4"

" 1/2"

3/8

1/4”, 3/8” & 1/2” dr SOCKET SET

FRP ratchets, uni joint, T-bar, coupler ext bars: 2”, 3”, 4”, 6”, 2-1/2” & 10” . 3 adaptors, 6” spinner handle. Bits 1/4” Hex, TX, PH, PZ, Sloted regular sockets: 4-32mm. Deep sockets: 8-17mm S/plug sockets: 16 & 21mm Part No. TM111

1/2"

Click Lock

FRP ratchet, reg sockets 10-32mm & 3/8" to 1-1/4", uni joint, 5" ext, 3/8"F x 1/2"M T-bar adaptor. Part No. T1230

Click Lock

32mm, e, s

oted mm

BUILD IT WITH TENG heavy duty aluminium 3 vial spirit levels

• 26 x 58mm heavy duty extruded frame • Crush proof, UV & temperature resistant vials • Temperature proof vial mountings • Shock absorbent end caps • 0.5mm/m accuracy standard position

600mm

FROM

800mm

Part No. slc0600 $49.00

1200mm

Part No. slc0800 $65.00

Part No. slc1200 $85.00

QUICK CLAMPS

Lever clamp has a powerful lever bar that makes it easy to put the clamping force right. Easy release button makes this clamp as fast to remove with 2 component plastic handle. Jaws have cushion FRP pads to protect working surface.

300mm Hacksaw

• Ergonomic rubber grip on both the rear & front handle • Cutting angle is adjustable on straight or 450 Part No. 701N1

Part No. CMQL150 CMQL300 CMQL450

Size 150mm 300mm 450mm

Clamping Force 1780N 1780N 1780N

2000mm

Part No. slc2000 $120.00

FROM

Span Capacity Price 80mm 150mm $35.00 80mm 300mm $39.00 80mm 450mm $49.00

18 pce 1000V SET

PISTOL TYPE QUICK CLAMPS

• S/drivers: 5 blade, 4 PH, 4 PZ • Pliers: 8" pliers, 8" combo pliers, 8" long nose plier, 6" side cutter, 8" heavy duty side cutter, 7" wire stripper

Quick action & unique lever clamp for applying the correct clamping force. Bottom mounted lever makes it comfortable to use. Easy release button for quick and easy unclamp. FRP material pads helps protect the working surfaces.

Part No. TV18N

345

FROM

27.50

shock absorbent carpenters hammer

Part No. CMQ150 CMQ300 CMQ450 CMQ600

Size Clamping Force 150mm 160kg 300mm 160kg 450mm 160kg 600mm 160kg

• Forged steel claw hammer • Shock absorbent grip • Fall protection hole (when attached to an affixed safety wire) • Head dia. 29mm, OAL 333mm Part No. HMCHM16

Price $27.50 $30.00 $35.00 $40.00

FROM

PIPE WRENCHES

Light weight aluminium pipe wrench in sturdy design. One hand operation.

Part No. PW12A PW14A PW18A PW24A PW36A

Size 39mm 47mm 63mm 76mm 127mm

Length 12” 14” 18” 24” 36”

Price $49.00 $59.00 $79.00 $119.00 $279.00

BOLT CUTTERS 4 pce wood chisel set

• Finely ground, clear lacquer coated shafts • Impact resistant, soft grip handles • Tanged thru blades with striking caps • 10, 16, 18 & 20mm blade widths Part No. WCS04S

Aluminium try squares Stainless steel blade with anodised aluminium stock. Blade 1.5 x 45mm, stock 18mm wide milled working surface. Deep etched, resistant to wear. FROM Measurement accuracy 0.03°.

Part No. BC414 BC418 BC424 BC430 BC436

Size 379mm 485mm 652mm 800mm 958mm

Hardened cutting edge compound action

Price $59.00 $69.00 $85.00 $120.00 $150.00

FROM

Part No. SQAA200 SQAA250 SQAA300

Blade Length 200mm 250mm 300mm

Price $29.00 $35.00 $39.00

safety wire

24.50

• Safety wire for tools • Locking wire with spring hook & plastic covered stainless spiral wire. Part No. SSH01 9

ALL THE TOOLS YOU NEED, LIFETIME GUARANTEED

TENG TORQUE HEAVY DUTY TORQUE WRENCHES

FROM

• Supplied with test certificate • Degree scale for after tightening of cylinder heads • Tested to meet or exceed ISO standard .

Part No. 1492AG-E 3892AG-E1 3892AG-E3 1292AG-EP 1292AG-E4 3492AG-E 3492AG-E1 3492AG-E2

DR 1/4” 3/8" 3/8" 1/2" 1/2" 3/4" 3/4" 3/4"

Nm 5-25 5-25 20-110 40-210 70-350 90-450 140-700 140-980

Ft/Lb 4-18 4-18 14-81 30-150 50-250 67-340 100-500 100-700

Price $85.00 $85.00 $95.00 $95.00 $179.00 $285.00 $695.00 $850.00

196225 CERTIFICATE

• Dual scale Nm & Ft/lb • Reverse lever on head • Supplied in storage case

REVERSIBLE TORQUE WRENCHES 1/2” & 3/4” DR

Push thru drive Part No. 1292AG-ER 1292AG-E4R 3492AG-ER

DR 1/2” 1/2" 3/4"

Nm 40-210 70-350 65-450

Ft/Lb 30-150 50-250 45-300

ADJUSTABLE Shifters

FROM

139

Price $139.00 $220.00 $350.00

TORQUE MULTIPLIERS

FROM

21.50

• 150 adjustable shifter used in narrow areas as only 300 turning is needed • Wider jaw opening increases the range of bolt sizes to be worked on • Non protruding on the movable jaw end gives better action when space is limited. Part No.

Size

Price

4001

4” 6” 8” 10” 12” 15” 18” 24”

$21.50 $22.50 $28.00 $35.00 $45.00 $89.00 $155.00 $325.00

4002 4003 4004 4005 4006 4007 4008

SEE THE LIGHT CREE LED TORCHES

• Shockproof aluminium body • Water resistance to IPX6 • Batteries not included

$ • Length 135mm • Diameter 23mm Part No. 581N

$ 3:1 Torque Multiplier 1400Nm

3:1 Torque Multiplier 2700Nm

• Incoming Dr: 1/2”, Outgoing Dr: 3/4” • Max Force: 1400Nm • Max Force: 1000 ft/lb

• Incoming Dr: 3/4”, Outgoing Dr: 1” • Max Force: 2700Nm • Max Force: 2000 ft/lb

Part No. MP1400

Part No. MP2700

595

HEX BIT DRIVERS

Part No. DR MD193 1/4" MD216 1/4”

Length 193mm 216mm

Part No. MDQ147 MDQ183 MDQ217

Length 147mm 183mm 217mm

DR 1/4” 1/4” 1/4”

Type Price Magnetic $15.00 Magnetic $15.00

Type Quick Chuck Quick Chuck Quick Chuck

Part No. 583N

695

FROM

NEW

• Length 195mm • Diameter 40mm

$ HIGH POWER CREE HEADLIGHT

• High/Low/Off function • ABS durable plastic case • Water resistant & 1 metre shockproof • Max 250 Lumen. Part No. 586C

NEW

Price $19.50 $22.50 $24.50

1/4” Dr x 1/4” Hex Flip Reverse Hex Head Adaptor Part No. RHA14

17” 1/2” Dr FLEX HANDLE BREAKER BAR • Length 450mm • Chrome vanadium steel Part No. 1201

19” 3/4” DR FLEX HANDLE BREAKER BAR

• Length 480mm • Chrome vanadium steel • Matt chromium plated • Quick release system Part No. M340070

$ 10

22.50

ALL

ALL THE TOOLS YOU NEED, LIFETIME GUARANTEED

TENG IMPACT BITS SET EACH

10 PCE IMPACT BITS SET TX

• Suitable for TORX® head screws • 30mm impact long bits • TX Bits: TX10, TX15, TX20, TX25, TX27, TX30, TX40 • Magnetic bits holder 60mm

10 PCE IMPACT BITS SET

10 PCE CONSTRUCTION IMPACT BITS SET

Part No. TM010

Part No. TMC010

• 30mm impact long bits • Bits: TX20, TX25, TX30 • ROB1, ROB2 • HEX4, HEX5 • PHG2 • PZ2 • Magnetic bits holder 60mm

Part No. TMTX10

RATCHET TYPE QUICK LEVER F-CLAMPS

For high pressure, fast action clamping purposes this ratchet type lever prevents overloading & resists vibration. Ergonomic clamp and release lever.

FROM

Part No. CMFQ20 CMFQ25 CMFQ30 CMFQ40

Span

Depth Clamping Force Price 200mm 100mm 350kg $89.00 250mm 120mm 400kg $99.00 300mm 140mm 500kg $120.00 400mm 120mm 550kg $130.00

Heavy duty PLIERS • Steel alloy with CrMo. • Bi-material handles.

EACH

8” SIDE CUTTING Part No. MB442-8T

BUY ALL 3 $90

Part No. MBCOMBO

8” COMBO

Part No. MB452-8T

8” LONG NOSE

• 2 arm pullers with quick action adjustment • Dropped forged steel • Long claws with large contact area • Internal or external pulling • Internal pulling range: 90-250mm • External pulling range: 133-325mm

ase

megabite pliers

Part No. MB461-8T

5 PCE QUICK ACTION PULLER KIT

• 30mm impact long bits • Bits: TX10, TX20, TX25, TX30 • PZ1, PZ2, PZ3 • PHG2 • PH2 • Magnetic bits holder 60mm

10” WIDE JAW MULTIGRIP PLIER

• 50mm opening • Quick adjust button • One hand operation • Serrated jaws with pipe grip Part No. MB482-10Q

Part No. DIS-SP05Q

895

10” HEAVY DUTY cable cutter

• Chrome molybdenum steel. For copper & aluminium electric cables • One hand function with pitch guard • Cuts copper cable 60mm Part No. MB445-10

5 PCE CIRCLIP PLIER

2/3 leg GEAR PULLER 4” 7”

3 legged with a special yoke for 2 legged pulling • Spread: 76-102mm • Max reach: 89mm Part No. SP11 $99.00

• Spread: 75-175mm • Max reach: 137mm Part No. SP22 $199.00

• Reversible spring loaded handle with locking pin for internal & external circlips • Internal / External Tips: 1 x 45º, 1 x 90º, 1 x Straight 1.2mm, 1 x Straight 1.5mm Part No. 480

FROM

22.50

THE RIGHT TOOL, THE RIGHT PRICE

ENGINE SERVICE Universal Funnel

• Adjustable spring clamp (28-74mm opening range) provides mess free filling of fluids into engines, drums, barrels & containers with no need to hold the funnel • Transparent lower section indicates fluid flow • For use with supplied, $ threaded funnel or most normal funnels.

Part No. RT0273

7 pce Diesel Injector Seat Cutter

NEW

159

• Reamers (1 each): 15 x 19mm flat, 17 x 17mm flat, 17 x 19mm flat, 17 x 17mm angled, 17 x 21mm angled. • Accessories: 1 x 175mm extension, 1 x 150mm T-handle • Features: Ideal for refacing & cleaning of diesel injector seats within the cylinder head • Removes built up debris, providing a clean seating surface for the injector, which can eliminate blow by • Suitable for standard & common rail diesel applications • Supplied in a blow mould storage case with foam insert for secure storage. Part No. RT4402

125

$ CHAIN BREAKING & RIVET set

• Breaks chains from numbers 35 to 630 Part No. RT6943

NOID LIGHT SET

• Check electronic fuel injection (EFI) signals • Easily checks for systems of GM PEI, FORD TBI, GEO TBI, BOSCH PFI, GM TBI & GM SCPI • Disconnect the fuel injectors, plug the Noid Light into injector wiring harness, then crank the engine.Part No. RT0160

OIL PRESSURE KIT

MASTER DIESEL COMPRESSION KIT

• Diesel compression tester with wide range of adaptors • High quality hydraulic gauge w/rubber jacket. Full glow plug and injector adaptors. Additional clamp-on adaptors provide for truck, van, bus, marine & agricultural vehicles.

100mm Gauge assembly, 70bar/1000psi, Hose length: 430mm 20-Glow plug test adaptors: 1- M8 x P1.0 (111mm), 10- M10 x P1.0 various lengths, 7- M10 m T1.25 various lengths, 1-M12 x P1.25 (8.77mm), 1-M19 x P1.0 (132mm) 5-Injector test adaptors: 1-M22 x P1.5, 87mm(L.)Dia.16.5, 1-M24 x P1.5, 75mm(L.)Dia.9 1-M20 x P1.5, 62mm(L.)Dia.9, 2-M24 x P2.0, 70mm(L.)Dia.13.7 5-Clamp-on injector adaptors: 1-M10 x P1.25: 30, 35, 40.5, 2 x 41.5mm (L) 1-Clamp-on spindle: M10 x P1.25, 175mm(L.) 3-Clamps: 1-Dia:13.3mm, Side Dia:8.2mm, 52.5mm(L.), 1-Dia:13.3mm, Slot Dia:18mm, 64.2mm(L.) 1-Dia:13.3mm, Slot Dia:24.7mm, 73.1mm(L.) Part No. RT0517M

199

$ • Tests engine oil & transmission pressure • For petrol & diesel engines • Gauge 0-150psi (0-10bar), • With oil filter clamp for piercing oil filter canister when pressure switch is difficult to access • Metric, DIN, UPT, NPT & UNF & 90° adaptors.

550

Part No. RT0118

SCREW & STUD EXTRACTORS

169

9 PCE TWIST SOCKET SET

155

SCREW & DRILL EXTRACTOR SET

• Extractor & drill sizes: 1/8", 3/16", 1/4", 5/16", 11/32" • Special drill guides make drilling centred holes easy • Suitable for screw sizes: M5 - M16 Part No. RT9921

38 BLADE FEELER GAUGE

• Steel blades 0.0015”, 0.002” to 0.035” in 0.001” increments • 3 brass blades 0.008”, 0.010”, 0.012”. Part No. RT3100

• Loosen a nut that cannot be done by a socket • Metric sizes 1/2” dr : 10-19 mm Part No. RT7504

$ NUT SPLITTER SET

• Small splitter for nuts from 1/8” to 5/8” • Large splitter for nuts from 3/8” to 1” Part No. RT1227

EACH

15.95

BUY BOTH $29 Part No. RTFG2 12

175

25 pce MULTI SPLINE EXTRACTOR SET

• Remove broken studs, screws, pipes & fittings • Hex head for use with sockets & wrenches • Fine knurled multi spline grips a large cross section compared with std extractors • Tough alloy steel 1/8” (3.2mm) to 7/8”(22.3mm) Part No. RT0305

26 BLADE ANGLE FEELER GAUGE

• 0.005” to 0.030” in 0.001” increments • Marked with thou & mm size on each blade Part No. RT3102

hs,

.)Dia.9

with multi

THE RIGHT TOOL, THE RIGHT PRICE

GIVE ME A BRAKE!

PRO DISC PAD SPREADER • Fits in brake caliper to push back pistons for new brake pads installation • Use with bar provided, 1/2” dr ratchet or 21mm Hex socket. Part No. RT5559

DOUBLE FLARING TOOL

Sizes: 5 to 16mm, 3/16" to 5/8" Part No. RT6113

11 PCE CALIPER WIND BACK KIT

129

TUBE CUTTER

• Professional set for rear wheel disc brake calipers • Suits BMW, Ford, Holden, Honda, Mazda, Mercedes Benz, Mitsubishi, Nissan, Rover, Toyota, VW & Audi.

ADJUSTABLE BRAKE CYLINDER HONE

Part No. RT5593

• Deglazing of engine cylinders • For Cylinders: 19-64mm dia • 2 medium grit stones: 28mm long • Adjustable pressure for speed honing • Replacement stone sets are available

• Hardened cutting wheel cuts bundy, copper, brass, aluminium & mild steel tubing 1/8” to 1-1/8”(3-30mm) • Wide dual roller design, can also do square cuts • Tapered burr remover, cleans burrs after cut.

Part No. RT3775

Brake Bleeder Wrench Kit

• Designed for efficiency & ease in bleeding brake & hydraulic clutch systems • Colour coded nipples for easy identification • 1.2mm transparent hose with one-way check valve • Six point socket & wrench sizes 7, 8, 9, 10 & 11mm • Supplied in blow mold case with foam tray insert.

Part No. RT5806

Part No. RT0014

$ HOSE PINCER SET

• Pinch off vacuum, fuel & brake lines without damaging the line

145

Part No. RT9035

BODY & PANEL SAND BLASTING GUN

VEHICLE FENDER EXPANDER

• Removing old paint, rust spots etc. • Steel nozzle (5.2mm) • Top mounted hopper • Sand size #46 - #100 (brown alu oxide)

• Ideal when fitting larger rims & tyres. Reforms lip without paint damage to outer lip • Universal, fits all 3, 4, & 5 stud wheels. Bolts to wheel hub and fully adjustable for front and rear wheel.

Part No. RT-201SB

Part No. RT0093

SPOT WELD CUTTER

• 1/4” arbor with retractable pilot • Use with 1/4” drill or larger Part No.RT6866

6 PCE MINI PANEL REMOVAL SET

Part No. RT5215

10-IN-1 TRIM TOOL

• Performs 10 different jobs • Door trim removal to windscreen clip removal. Part No. RT6000

11 Pce 3/8” DR AF CROWSFOOT WRENCH KIT $ • Sizes: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16”, 1” Part No. RT7390

375

• Extra slim profile & unique shape for the delicate task of removing small or fine fascia trim & bezels of; dash-boards, air vents, door panels, door locks, electronic seat controls, seat levers, gear shifter, etc.

15 PCE 3/8” dr Metric CrowsFoot $ Wrench Kit

• Sizes: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 26mm Part No. RT7391

100

THE RIGHT TOOL, THE RIGHT PRICE

ELECTRICAL & BATTERY

249

$ 3-48V CIRCUIT TESTER

BATTERY TERMINAL SPREADER

• Checks vehicle circuits between 3 to 48 Volts from passenger cars to trucks, for both electric and electronics.

• Spread terminals in one operation with the drop forged plier type tool Part No. RT1290

• For use with water based degreasers • Air pulses the submerged part to clean • Attaches to standard airline (working pressure 6-8 Bar) • Lockable lid & molded handgrips • Made from lightweight high grade plastic with internal aluminium pallet • External dimensions 600 x 450 x 270mm. * Not for use with acid or alkali cleansers Part No. RT0148

Part No. RT1427

BATTERY CARRIER

• Scissor lock jaws with serrated teeth ensure a firm grip onto top & side terminal batteries up to 190mm wide

THICK LEATHER HANDLE

Part No. RT1306

Air Pulse Parts Cleaner

HEAVY DUTY PIPE CUTTER

100

• Self Locking grip handle design, cuts pipes easily without needing to exert pressure • Adjust T Bar in handle for further force • Cut up to 2.5mm thickness & 60mm diameter. Part No. RT6108

DASHBOARD SERVICE TOOL KIT

• Kit includes: Radio removers, instrument cluster removing Hooks, ignition lock removers Part No. RT9007

Steering & Suspension 3 pce COIL SPRING COMPRESSOR SET

• Safe refurbishment of vehicle suspension units • Includes safety hooks

120

Part No. AT200

HYDRAULIC BALL JOINT SEPARATOR

• 2 stage operation suits most cars & light trucks • Tempered drop forge steel body & offset lever combined with a 1.5ton hydraulic ram provide ease of performance • Jaw openings (2 stage): 30mm & 56mm • Jaw width: 22mm. Part No. RT3982

110 PCE METRIC, METRIC ISO & METRIC FINE

Tap & Die Sets 225

• 1 each taper and intermediate taps • 1-tap wrench 1.6-11mm • 1-tap wrench 5-20mm • 1-die stock (1"/25.4mm OD) handle wrench • 1-die stock (1-1/2"/38.1mm OD) handle wrench • 1-'T' handle tap wrench • Metric: 2-18mm ISO & fine thread Part No. 748401100

110 PCE METRIC / SAE / UNF / UNC / METRIC ISO / METRIC FINE / NPT TAPER AND INTERMEDIATE TAPS

40 pce metric, METRIC ISO & METRIC FINE

• 1-tap wrench 1/8" - 1/2" (3mm-12mm) • 1-tap wrench 3/16" - 3/4" (5mm-20mm) $ • 1-die stock (1" OD) handle wrench • 1-die stock (1"-1/2" OD) handle wrench • 1-'T' handle tap wrench • Metric: 6-18mm - UNC: 3/16"-3/4" • UNF: 3/16"-3/4" - NPT: 1/8" and 1/4" • UNS: 1/4"-24 TPI and 1/4" 32 TPI

• 17 Taps 3-12mm & 1/8” NPT 27 • 1 Tap wrench 3-16mm • 1 Die stock (1”/25.4mm O.D.) handle wrench.

215

Part No. 748104040

Part No. 748401200

he ine

ic s i

THE RIGHT TOOL, THE RIGHT PRICE

MAKE AN IMPACT EACH

46 PCE 3/8" & 1/2" dr METRIC

• 10 pce 3/8" dr: 10-19mm, 10 pce 3/8" dr Deep: 10-19mm • 16 pce 1/2" dr: 10-32mm, 10 pce 1/2" dr Deep: 13-24mm Part No. DL34T46K $215.00

EACH

215

46 PCE 3/8" & 1/2" dr AF

• 10 pce 3/8" dr 5/16"-7/8" • 10 pce 3/8" dr Deep: 5/16"-7/8" • 16 pce 1/2" dr: 5/16"-1-1/4" • 10 pce 1/2" dr Deep: 3/8"-15/16" Part No. DL34T46KAF $215.00

1/2" Dr 4 PCE FLIP WHEEL SOCKET SET

1/2" Dr 9 PCE AF IMPACT HEX SOCKET SET

• 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8" & 3/4". 78mm OAL. Part No. DL409KHS $90.00

139

• Impact uni joint: 1/4", 3/8" & 1/2" dr • 8 pce impact adapter: 1/4"dr-3/8"M, 3/8"dr-1/4"M, 3/8"dr-1/2"M, 1/2"dr-3/8"M, 1/2"dr-3/4"M, 3/4"dr-1/2"M, 3/4"dr-1"M, 1"dr-3/4"M. Part No. DL234UD11K

Part No. DL404KFMS

MEASURE IT UP • Four function with auto-off. Triple read scale - 0.01mm - 0.0005” - 1/128”

• 5, 6, 7, 8, 9, 10, 12, 14 & 17mm. 78mm OAL. Part No. DL409KHM $90.00

11 PCE UNIVERSAL JOINT & ADAPTER SET

• 17 x 19mm, 21 x 22mm, 3/4" x 13/16" • 3" extn bar.

150mm (6”) TRIPLE READ VERNIER

1/2" Dr 9 PCE METRIC IMPACT HEX SOCKET SET

YES, IT EVEN READS FRACTIONS!

CLAMP MULTIMETER

• Autorange, measures DC/AC Voltage, AC current, resistance Testing diode, continuity with buzzer, datahold, battery capacity warning. • With test leads, carrying case, battery & manual. Part No. 128560109

Part No. 144550100

$ METRIC

FRACTIONS

Digital brake rotor caliper

• Reading 0.01mm. Stainless steel • Hold function • Adjustable between mm & inch • Battery type SR44 • Measuring length: 75mm, Length of jaws: 92mm

IMPERIAL

160

Part No.139490106

• Measuring distance: 50-150mm • Photo Measuring: 2.5-100,000 rpm • Contact Measuring: 2.5-20,000 rpm • Metres per minute: 0.05-2000 • Feet per minute: 0.02-6560

TELESCOPIC GAUGE SET

Part No. 52910106

• Measures: DC/AC voltage, resistance, frequency & capacitance • Diode test, continuity test with buzzer, datahold, relative mode • With test leads, battery, manual & cover Part No. 198650103

DIGITAL TACHOMETER

E • 6 Telescopic gauges, spring loaded with locking screw in shaft • Range of measurements: 8-150mm

Pocket Multimeter

Part No.132370107

295

AIR TOOLS ACCORDING TO TENG

249

1/2" DR 950Nm IMPACT WRENCH

1190Nm Peak Breaking Torque

113

28mm Low Profile

188

• Twin hammer mechanism • Durable aluminium housing • Weight: 2.5kg • One hand forward reverse button. 3 forward, 1 reverse speeds • Bolt capacity M16 • Free speed 6800RPM Part No. ARWM12

345

COMPACT IMPACT WRENCH

• 925Nm peak breaking torque. 1/2" DR 770Nm • Lightweight/aluminium housing 3: forward, 1: reverse speed • Low profile impact sockets 10-24mm • Bolt capacity M16 • Free speed 8000RPM Part No. TTDAWM13M

159

$ 3/8" Dr Stubby Air Ratchet

3/4" Dr 1830Nm COMPOSITE HOUSING Impact Wrench 2195Nm Peak Breaking Torque

• Twin hammer mechanism • Extra lightweight composite housing. • Weight: 3.5kg • One hand forward reverse button. 3 forward, • 1 reverse speeds • Bolt capacity M32 • Free speed 6000RPM Part No. ARWC34

795

• Max Torque 30ft/lb, 41Nm • Squeeze action metal trigger • 170mm overall length • Bolt capacity M10. Part No. ARRM38

6MM DIE GRINDER

1/2" Dr Air Ratchet

• Max Torque 70ft/lb, 95Nm • Squeeze action metal trigger • 275mm overall length • Bolt capacity M13. Part No. ARR12

169

AIR BLOW GUNS

• 6mm Collet 25,000rpm • Length 161mm • Weight 400g. Composite grip • Rear exhaust with silencer • Safety throttle lever Part No. ARG01

149

• Working pressure 80-150 PSI • Air Inlet 1/4" NPT• Metal thread insert

100mm Angle Tip Gun

900 DIE GRINDER

Overall Length: 212mm Part No. ARB01 $14.95 EA.

270mm Angle Tip Gun Overall Length: 360mm Part No. ARB02 $16.95 EA.

.50 BUY BOTH $ BLOW GUNS Part No. BG2

• 6mm Collet 20,000rpm • Length 165mm • Weight 500g • Composite grip • Rear exhaust with silencer • Safety throttle lever Part No. ARG02

179

EMAIL: GETYOURS@TENGTOOLS.COM.AU

Teng TOOLs Australia. P.0. Box 485 North Melbourne 3051 email: getyours@tengtools.com.au Prices shown include G.S.T. and are recommended only. There is no obligation to comply. Not all products in this brochure are available from ALL outlets. All products in this brochure were available at the time of printing. Suppliers will do everything possible, within reason, to maintain stocks of products advertised but cannot be responsible for unforeseen shortfalls beyond their control. E&OE Copyright ©. Reproduction, whole or in part is prohibited without written approval. Prices valid until July 31st, 2019. Additional freight charges may apply in some areas.