Tradequip Nov - Dec 2019 by Riverland Steel

ORKSHOP PECI ALISTS W S SALE ENDS 31 DECEMBER 2019

For full details on all products go to www.tqbbrands.com.au

Transmission Lifter 500kg 2 Way Tilt

S U N BO ! R E F OFINCLUDED

TRADE

BONUS OFFER

$799

the trusted brand in equipment

2002TOD FEATURES

MADE FOR THE

Frame is constructed of high-grade steel and built to exacting standards for quality and durability. Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust. Paint is oil, grease and dirt-resistant for easy cleanup. Universal mounting cradle provides a wide fore and aft tilt range. High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to lift load. Piston-ram treated and polished to reduce wear and extend service life.

2 way tilt action

Safety chains included

Order this TradeQuip 500Kg Transmission Lifter & receive this bonus

NE W A ND IM PROVED M ODEL

Telescopic Oil Drainer 20 Litre

Breather valve

Code 1010

Valued at

$ 155 Foot-operated quicklift pump Wide wheel stability

All Prices include GST

Working height: Min. 870mm - Max. 1850mm

• Working load limit: 500kg • Working height: 870-1850mm • Cradle size: 250x362mm • 2 stage lift • 2 way tilting working head • Cradle forward tilt: 15º • Cradle backward tilt: 7º • Base: 810 x 810mm

Truck Jacks

For full details on all products go to www.tqbbrands.com.au

BONUS OFFER

Valued at

Order one of these Borum Air Actuated Jacks & receive this bonus

$ 109

Truck Wheel Nut Wrench Torque Multiplier Air Actuated Jack 2 Stage 10,000/25,000kg • First stage: 25,000kg safe working capacity • Second stage: 10,000kg safe working capacity • First stage hydraulic lift: 97mm • Second stage hydraulic lift: 95mm • Height: 185-497mm • Adaptors: 45 and 75mm • Operating air pressure: 145-175psi • Handle length: 1380mm • Chassis: 770x282x185mm

Air Actuated Jack 2 Stage 15,000/30,000kg

DEEP R EACH

BONUS OFFER!d

BTJ1025TAB

INDUSTRIAL QUALITY

FEATURES Double sealing function using XTP industry sealing. Telescopic air actuation lift (air-hydraulic pump). Long T-handle lets you easily position your jack under vehicle. Self-returning lowering and lifting switch. Internal and external cylinders hard chromed . High manoeuvrability & deep reach under vehicles. 2 extension adaptors / saddle plates. Large rubber wheels.

INDUSTRIAL QUALITY

Field Se rv ic e Ja ck

include

$2699

• First stage: 30,000kg safe working capacity • Second stage: 15,000kg safe working capacity • First stage hydraulic lift: 73mm • Second stage hydraulic lift: 66mm TH E • Height: 150-409mm ALL • Adaptors: 45 and 75mm ROUNDER • Operating air pressure: 145-175psi • Handle length: 1300mm • Chassis: 480x290x150mm

BTJ1530TAB

INDUSTRIAL QUALITY

LIFTS 25,000KG

Code 8032

BONUS OFFER!d include

$1979

LIFTS 30,000KG

Air Actuated Mobile Service Jack 2 Stage 15,000/30,000kg US

BON OFFER!d

• First stage: 30,000kg safe working capacity • Second stage: 15,000kg safe working capacity • First stage hydraulic lift: 73mm • Second stage hydraulic lift: 66mm • Height: 150-409mm • Adaptors: 45 and 75mm • Operating air pressure: 145-175psi LIGHTWEIGHT • Handle length: 500mm • Chassis: 490x275x150mm

include

24kg

BTJ1530TAMB

Lifts 30,000KG

$2199

FEATURES Mobile 24kg total weight. American made seals. Double sealing function using XTP industry sealing. Folding handle utilised for ultimate mobility. Telescopic air actuation lift (air-hydraulic pump). Long T-handle lets you easily position your jack under vehicle. Self-returning lowering and lifting switch. Internal and external cylinders hard chromed . High manoeuvrability & deep reach under vehicles. 2 extension adaptors / saddle plates. Large rubber wheels.

All Prices include GST

GARAGE JACKS • TRANSMISSION LIFTERS • FLUID HANDLING • WORKSHOP COOLING

Air Actuated Jack 3 Stage 10,000/25,000/50,000kg • First stage: 50,000kg safe working capacity • Second stage: 25,000kg safe working capacity • Third stage: 10,000kg safe working capacity • First stage hydraulic lift: 62mm • Second stage hydraulic lift: 61mm • Third stage hydraulic lift: 69mm • Height: 160-472mm • Adaptors: 45 and 75mm • Operating air pressure: 145-175psi • Handle length: 1380mm • Chassis: 825x282x160mm

BTJ102550TAB

LIFTS 50,000KG

BONUS BTJ60TAB OFFER!d BONUS include OFFER!d

INDUSTRIAL QUALITY

BTJ204060TAB

SU PE R DEEP SU PE R LOW

$3599

• First stage: 80,000kg safe working capacity • Second stage: 50,000kg safe working capacity • First stage hydraulic lift: 111mm • Second stage hydraulic lift: 102mm • Height: 230-563mm • Adaptors: 45 and 75mm • Operating air pressure: 145-175psi • Handle length: 1300mm • Chassis: 930x340x230mm

FEATURES XTP Industry double sealing function. Telescopic air actuation lift. Long T-handle positions jack under vehicle. Self-returning lowering and lifting switch. Internal & external cylinders hard chromed. High manoeuvrability & deep reach. 2 extension adaptors / saddle plates. Large rubber wheels.

LIFTS 60,000KG

LIFTS 80,000KG

$4299

Air Actuated Jack 2 Stage 25,000/50,000kg • First stage: 50,000kg safe working capacity • Second stage: 25,000kg safe working capacity • First stage hydraulic lift: 115mm • Second stage hydraulic lift: 114mm • Height: 215-564mm • Operating air pressure: 145-175psi • Adaptors: 45 and 75mm • Handle length: 1380mm • Chassis: 805x282x215mm

BONUS OFFER!d BTJ2550TAB

Air Actuated Jack 2 Stage 50,000/80,000kg

INDUSTRIAL QUALITY

$3249

include

LIFTS 60,000KG

BTJ5080TAB

420 to 1031m m Wor ki ng Ra ng e

include

• First stage: 60,000kg safe working capacity • Second stage: 40,000kg safe working capacity • Third stage: 20,000kg safe working capacity • First stage hydraulic lift: 57mm • Second stage hydraulic lift: 59mm • Third stage hydraulic lift: 61mm • Height: 150-447mm • Adaptors: 45 and 75mm • Operating air pressure: 145-175psi • Handle length: 1380mm • Chassis: 875x295x150mm

• Safe working capacity: 60,000kg • Lift range: 420 - 1031mm INDUSTRIAL • Hydraulic lift: 311mm QUALITY • Adaptors: 100mm and 200mm • Handle length: 1290mm • Operating air pressure: 145-175psi • Chassis: 910L x 420H x 300Wmm

DEEP REAC H LOW ER PROFILE

Air Actuated Jack 3 Stage 20,000/40,000/60,000kg

INDUSTRIAL QUALITY

Air Actuated High Lift 60,000kg

INDUSTRIAL QUALITY

DEEP REAC H HI GH LI FT

BONUS OFFER!d include

LIFTS 50,000KG

$3899

$3299 SU PE R DEEP SU PE R HI GH LI FT SU PE R HI GH CA PACITY

BONUS OFFER!d include

All Prices include GST

• HYDRAULIC PRESSES • CRANES • STANDS • RAMPS • BOTTLE JACKS • and more. . . .

Truck Jacks

For full details on all products go to www.tqbbrands.com.au

Air Actuated Hydraulic 35,000kg

Air Actuated 2 Stage 20,000/40,000kg

• Safe working capacity: 35,000kg • Height: 255-633mm • Hydraulic lift: 155mm • Adjustable height: 123mm • Adaptors: 21, 61, 100mm • Handle length: 1110mm • Operating air pressure: 110-125psi • Chassis: 555L x 255H x 295W

Includes Height A daptors LIFTS 35,000KG

BTJ35TA

INDUSTRIAL QUALITY

$999 INCLUDES Saddle Adaptors 19, 55 & 100mm

• Safe working capacity: 22,000kg 19mm • Lift range: 210-525mm • Hydraulic lift: 120mm • Adjustable height: 80mm • Adaptors: 19, 55, 100mm • Handle length: 1065mm • Chassis: 500L x 215H x 320Wmm

2003T

Includes Height A daptors

55mm

100mm

LIFTS 40,000KG

$1495 Air Actuated 50,000kg

LIFTS 22,000KG

No1

BEST SELLER

MADE FOR THE

TRADE

• Safe working capacity: 50,000kg • Lift range: 287-650mm • Hydraulic lift: 153mm • Adjustable screw: 110mm • Adaptors: 20, 60, 100mm • Handle length: 1230mm • Operating air pressure: 110-125psi • Chassis: 525L x 288H x 325Wmm

LIFTS 50,000KG

BTJ50TA FEATURES

Professional quality rugged steel construction. Wear-resistant quality sealing O-rings. Strong hydraulic pump. 3-position pumping handle. Temperature-resistant hydraulic oil. Treated and polished piston and ram. Built-in bypass hydraulic safety overload system. Compact design easily fits between dual tandem axles. Quick Lift lifting ram comes in contact with the load faster. Convenient & efficient height adaptors. High quality lead-free paint is oil, grease and dirtresistant finish for easy cleanup.

Includes Height A daptors

$1395

FEATURES

Pro quality rugged steel construction. Wear-resistant quality sealing O-rings. Strong hydraulic pump. 3-position pumping handle. Temperature-resistant hydraulic oil. Treated and polished piston and ram. Built-in bypass hydraulic safety overload. Compact design and Quick Lift ram comes in contact with the load faster. Convenient & efficient height adaptors. High quality lead-free paint is oil, grease and dirt-resistant finish for easy cleanup.

Includes Height A daptors

BTJ2040TA Pro quality rugged steel construction. Wear-resistant quality sealing O-rings. Strong hydraulic pump. 3-position pumping handle. Temperature-resistant hydraulic oil. Treated and polished piston and ram. Built-in bypass hydraulic safety overload system. Compact design easily fits between dual tandem axles. Quick Lift lifting ram comes in contact with the load faster. Convenient & efficient height adaptors. High quality lead-free paint is oil, grease and dirt-resistant finish for easy cleanup.

Pro quality rugged steel construction. Wear-resistant quality sealing O-rings. Strong hydraulic pump. 3-position pumping handle. Temperature-resistant hydraulic oil. Treated and polished piston and ram. Built-in bypass hydraulic safety overload. Compact design easily fits between dual tandem axles. Quick Lift lifting ram comes in contact with the load faster. Convenient & efficient height adaptors. High quality lead-free paint is oil, grease and dirt-resistant finish for easy cleanup.

the trusted brand in equipment

INDUSTRIAL QUALITY

FEATURES

Air/Hydraulic 22,000kg

• 1st stage: 40,000kg safe working capacity • 2nd stage: 20,000kg safe working capacity • Lift range: 143-360mm • 1st stage hydraulic lift: 60mm • 2nd stage hydraulic lift: 57mm • Adaptors: 8, 50, 100mm • Handle length: 1220mm • Operating air pressure: 100-120psi • Chassis: 510L x 215H x 300W

$799

INDUSTRIAL QUALITY

All Prices include GST

GARAGE JACKS • TRANSMISSION LIFTERS • FLUID HANDLING • WORKSHOP COOLING

TQ Pro Using CNC technology, TQ Pro products are constructed using superior-grade steel and built to premium TQ Pro standards for professional quality and durability. The premium quality large diameter hydraulic steel cylinders are machined with precision tolerances, then treated and polished to minimise wear and extend service life. Incorporating the latest technology in aggressive wiping lips and OD exclusion, the high capability premium quality seal systems efficiently protect internal hydraulics keeping it free from dirt, mud, water, and other contaminants. A lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting premium finish with a final coat that is oil, grease and dirt-resistant for easy cleanup.

Air Actuated 20,000kg

Truck Jack Air Actuated Single Stage 20,000kg • • • • • • • •

Working load limit: 20,000kg Working height: 215-456mm Hydraulic Lift: 141mm Adjustable screw: 85mm Adaptors: 20, 50, 100mm Handle length: 1335mm Operating air pressure: 145-175psi Chassis: 520L x 215H x 258Wmm

PREM IUM QUA L I TY SEA LS USES CNC Y PROTRJA20T G TECHNOLO latest applied R technologies O I SUPER Professional GRA DE Reputable STEEL Outstanding

FEATURES Seals made in America. Double sealing function using XTP industry sealing. Telescopic air actuation lift (air-hydraulic pump). Long T-handle lets you easily position your jack under vehicle. Self-returning lowering and lifting switch. Internal and external cylinders hard chromed. High manoeuvrability & deep reach under vehicles. 3 extension adaptors / saddle plates. Large rubber wheels. All adaptors can be properly stored for transport on each side of the jack.

$1549

• Working load limit: 20,000kg • Height: 260 - 516mm • Hydraulic lift: 257mm • Operating air pressure: 110-125psi latest applied • Air inlet fitting: 1/4” technologies • Ram travel: 150mm Professional • Screw adj: 95mm Reputable Outstanding

PROBJ20TA

20,000KG CAPACITY

THICK BASE DESIGN

$349

Air Actuated 20,000kg • Working load limit: 20,000kg • Height: 178 - 328mm • Hydraulic lift: 87mm • Operating air pressure: 110-125psi • Air inlet fitting: 1/4” • Ram travel: 85mm • Screw adj: 61mm

latest applied technologies

Professional Reputable Outstanding

PROBJ20TAS

$349

Air Actuated 30,000kg • Working load limit: 30,000kg • Height: 276 - 521mm • Hydraulic lift: 150mm • Operating air pressure: 110-125psi • Air inlet fitting: 1/4”

20,000KG CAPACITY

THICK BASE DESIGN

30,000KG CAPACITY

PROBJ30TA

Includes Height Adaptors

latest applied technologies

LIFTS 20,000KG

Professional Reputable Outstanding

THICK BASE DESIGN

All Prices include GST

$495

• HYDRAULIC PRESSES • CRANES • STANDS • RAMPS • BOTTLE JACKS • and more. . . .

Truck Equipment

Long Chassis Garage Jack 5,000kg Truck Jack Stands 15,000kg Code 15TJSSHORT 15TJS Load limit 15,000kg 15,000kg Min. Height 450mm 600mm Max. Height 750mm 1050mm Base Area 300x300mm 300x300mm

the trusted brand in equipment

2823

EXTRA HIGH LIFT

LIFTS 5,000KG

Price

TRADE

MODEL RUNOUT

$349

$389

Suitable for Buses and Trucks

Truck Jack Stands 25,000kg

$999

LIMITED STOCK

Truck Wheel Lifter 750kg INDUSTRIAL QUALITY

INDUSTRIAL QUALITY

• SOLD INDIVIDUALLY

Code 25TJSSHORT 25TJS Load limit 25,000kg 25,000kg Min. Height 385mm 660mm Max. Height 640mm 1055mm Base Area 300x300mm 300x300mm

Price

$429

$479

from

$429

10 Piece Jumbo Spanner Set the trusted brand in equipment

BTWD750

• Exact fit that won’t strip fasteners. • End is angled 15º for greater range.

TQHT10PJSM

• Sizes: 34, 36, 38, 41, 42, 44, 45, 46, 48, 50mm

$749 Combi Portable Bead Breaker 5,000kg

• Working load limit: 5,000kg • Pressure connection: 3/8”-18NPTF • Rated pressure: 10,000psi • Maximum rim size: 26” • Suits 1,2,3 pce rims (up to 26’’) with Suits pry bar / bead loosening pockets TradeQuip • Ram stroke: 90mm 20 54T & 2054-H

INDUSTRIAL QUALITY

$529

CANVAS WRA P SPANNER WALLET

the trusted brand in equipment

$219

TQHT10PJS (AF) • Sizes: 1-5/16”, 1-3/8”, 1-7/16”, 1-1/2”, 1-5/8”, 1-11/16”, 1-3/4”, 1-13/16”, 1-7/8”, 2”

Suitable for Buses and Trucks

BTBB05

from

FEATURES High-grade steel built to exacting standards for quality & durability. Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust. High strength locking pin. Controlled pin holes for easy height adjustments. Turned post slide for easy quick adjustments. Heavy-gauge steel Gusseted uprights prevent distortion or twisting. Rugged base provides plenty of stability.

MADE FOR THE

• Working load limit: 750kg • Lift arm spread: 533-635mm • Lifting range: 60-275mm • Tilt range: -2.5 to 10 degrees • 787L x 1092W x 895H mm

INDUSTRIAL QUALITY

• SOLD INDIVIDUALLY

Suitable for Buses and Trucks

Extends to over 1 metre

• Safe working capacity: 5,000kg • Height: 150-685mm • Main body width: 200mm • Saddle diameter: 150mm • Chassis: 400W x 1550Lmm

Extends to over 1 metre

For full details on all products go to www.tqbbrands.com.au

Giant Portable Bead Breaker 13,000kg • Working load limit: 13,000kg • Rated pressure: 10,000psi • Pressure connection: 3/8”-18NPTF • Suits 5-pce rims 635-1,295 mm (25’’-51’’) with pry bar / bead loosening pockets • Ram stroke: 105mm

MADE FOR THE

$219

TRADE

Air/Hydraulic Pump 10,000kg

• Maximum output pressure: 10,000psi • Usable hydraulic fluid capacity: 2.25 Litres • Operating air pressure: 90-145 psi • Air consumption: 7.5CFM @ 100 psi • Oil delivery with No Load: 49.5 cu.in/min • Oil delivery with Load: 7.6 cu.in/min • Input (Air) port thread: 1/4” -18 NPT • Output (Oil) port thread: 3/8” -18 NPT

Ideal power source for Porta Powers

2054-H available separately

the trusted brand in equipment

BTBB13 FEATURES Economical solution for earthmover wheels 25” - 51” multi-piece rims with pry bar pockets. Hydraulically clamps on wheel. Durable steel construction. Works with 10,000 PSI hydraulic pumps.

INDUSTRIAL QUALITY

Suits TradeQuip 2054T & 2054-H

$699

2054T FEATURES Made of durable light-weight corrosion-free aluminium. Built-in overload system prevents pump use beyond safe capacity. Hand or foot activation lever. Filter prevents contaminants from entering hydraulic system.

MADE FOR THE

TRADE

$579 “Requires Hydraulic Hose Kit” available separately 2054-H

GARAGE JACKS • TRANSMISSION LIFTERS • FLUID HANDLING • WORKSHOP COOLING

Workbenches 2000mm

3 Drawer Steel Workbench • 300kg load capacity • Heavy duty steel construction • High gloss enamel paint finish • Includes bottom shelf and 3 locking drawers • Each lockable drawer holds up to 50kg • 2000L x 860H x 640W mm

300kg

Load Capacity

BONUS R OFFE ded

$699

the trusted brand in equipment

1012TK

Order one of these Tradequip Workbenches & receive this bonus

3 Door Steel Wall Mounted Tool Cabinet ALSO AVAILABLE IN RED

1012TK

FEATURES

Specifically designed for professional workshop use, the TradeQuip “Made for the Trade” Steel 3-Drawer Workbench is manufactured from high quality, heavyduty steel and features a large surface for more work space and an extended lip around the surface of the table. The tough high gloss enamel paint finish is designed to provide years of protection against normal wear and tear.

300kg

Load Capacity

AVA I LA B LE I N R ED OR B LU E

BONUS OFFERd include

1012TKR

LIMITED STOCK

Code 1011T(Blue) or 1011TR(Red)

Valued at

$ 159

Steel Workbench • Capacity: 90kg • Work surface: 1500 x 700mm • Raised edge height: 50mm • 1520L x 710W x 830H mm the trusted brand in equipment

1014T

the trusted brand in equipment

1012TKR

MADE FOR THE

TRADE

• Total working load limit: 250kg • 5 Drawers: 445W x 420D x 100Hmm • Heavy duty steel construction • Power coated paint finish • 2 Shelves: 450W x 440Dmm • Extra strength rolled drawer edges • 1370W x 510D x 860Hmm 1370mm

the trusted brand in equipment

1500mm

830mm

$449

1013T FEATURES Specifically designed for professional workshop use, the TradeQuip Steel 5-Drawer Workbench has a large surface for more work space and features two large shelves for convenient storage of large parts, smooth sliding drawers store away tools and materials.

FEATURES Sturdy steel construction. High gloss enamel paint finish. Raised work surface edge.

TRADE

$699

5 Drawer Steel Workbench

50mm high raised edge

MADE FOR THE

860mm

BONUS OFFER

inclu

MADE FOR THE

TRADE

All Prices include GST

$599

• HYDRAULIC PRESSES • CRANES • STANDS • RAMPS • BOTTLE JACKS • and more. . . .

Transmission Lifter 500kg 4 Way Tilt

Transmission Lifter 1,000kg 2 Way Tilt

4 way tilt action

UNDER HOIST

Working height: Min. 855mm - Max. 1760mm

• Working load limit: 500kg • Working height: 855-1760mm • Complete with safety chains • Cradle size: 276x360mm • 2 stage lift • 4 way tilting working head • Cradle forward tilt: 23º • Cradle backward tilt: 16º • Cradle lateral tilt: 7º • Base: 690 x 780mm the trusted brand in equipment

2052

Hand release lever

MADE FOR THE

TRADE

$749

Foot pedal pump

UNDER RA M PS

TRADE

2 way tilt action

Transmission Jack 800kg • Working load limit: 800kg • Working height: 160-790mm • Adjustable tilt saddle • Chassis: 900Lx490Wmm Adjustable tilt saddle the trusted brand in equipment

Rugged full swivel castors

$989

MADE FOR THE

TRADE

Foot release

Underhoist Auxiliary Stand 680kg DE FOR THE • Working load limit: 680kg MA • Height: 1370 x 2045mm TRADE

Extends to over 2 metres

1198T FEATURES Ideal for supporting exhaust systems, shock absorbers and other vehicle components during under-vehicle repair. Heavy gauge steel frame prevents distortion or twisting. Auxiliary stands provide partial support for components they are NOT designed to support the vehicle. Quick action adjustable height mechanism. Sold individually recommended only to be used individually.

UNDER RA M PS MADE FOR THE

TRADE

No1

BEST SELLER

$149

360º rotating handle

$582

$599

the trusted brand in equipment

The adjustable head can be tilted forward, backward for alignment of transmission bolt patterns and pins. Lateral cradle adjustment improves efficiency. Hydraulic system is protected from overload damage. Safety load-restraining chain for raising & lowering safety. 2 fixed & 2 swivel castors allow easy movement & positioning.

MADE FOR THE

2081T

UNDER HOIST

2053T

Wide wheel stab ilit

• Working load limit: 1000kg • 360º rotating removable pump handle • 2 way tilt action • Working height: 205-725mm FEATURES • Chassis: 850 x 490 x 305mm the trusted brand in equipment

• Working load limit 1000kg • Working height: 860-1850mm • Saddle size: 355L x 255W • Saddle forward tilt: 15º • Saddle backward tilt: 7º • Base: 730 x 730mm

2 way tilt action

Suitable for 4WD and Trucks

Transmission Jack 1,000kg

2057T

For full details on all products go to www.tqbbrands.com.au

Working height: Min. 860mm - Max. 1850mm

Transmission Lifters

Foot pedal allows easy load movement and hand free operation

WARNING: Auxiliary stands must be used with a car lift hoist & are not intended to be used as a set of 4 to support a vehicle.

Truck Transmission Lifter 2,000kg • Working load limit: 2000kg • Working height: 210-900mm • Cradle size: min. 385-470mm • Cradle size: max. 570-470mm • Adjustable tilt cradle 900mm • Cradle forward tilt: 30° maximum • Cradle backward tilt: 30° lift height • Swivel castors: 100mm • Chassis: 1160L x 685Wmm

Suitable for 4WD and Trucks

UNDER RA M PS

BHDTJ2 360º rotating handle

INDUSTRIAL QUALITY

All Prices include GST

$1395

360º rotating handle

GARAGE JACKS • TRANSMISSION LIFTERS • FLUID HANDLING • WORKSHOP COOLING

TQ Pro TQ Pro TRANSMISSION LIFTERS FEATURE These TQ Pro “Latest Applied Technologies” 2-Stage Telescopic Transmission Lifters offer a wide range of versatility designed to help increase workshop productivity. For use with car and light truck transmissions. The universal mounting cradle provides a wide four way tilt range and the wide base is enhanced by four premium nylon swivel castors for safer maneuvering around the workshop. The convenient rapid lift without load and slow descent with load is controlled via the foot operated pump and release valve to keep the mechanic’s hands free during use. The height and cradle adjustability of these TQ Pro Telescopic Transmission Lifters make them great for any transmission installation or removal. CNC technology, ensures the chassis and frame constructed of superior-grade steel is manufactured to exacting standards that meet TQ Pro expectations for professional quality and durability.

Working height: Min. 940mm - Max. 1940mm

4 way tilt action

Transmission Lifter 500kg Working load limit: 500kg Working height: 940-1940mm Ram travel 1st stage: 490mm Ram travel 2nd stage: 510mm Saddle forward tilt: 55º Saddle backward tilt: 91º Saddle left tilt: 55º Saddle right tilt: 16º

PROTL500

latest applied technologies

PREM IUM QUA L I TY SEA LS USES CNC Y G TECHNOLO SUPERIOR GRA DE STEEL Foot operated pump and release valve

$999

Professional Reputable Outstanding

EARLY DECEMBER DELIVERY

Transmission Lifter Air Actuated 500kg

Transmission Lifter 1,000kg

• Working load limit: 500kg • Working height: 940-1940mm • Ram travel 1st stage: 490mm • Ram travel 2nd stage: 510mm • Saddle forward tilt: 55º • Saddle backward tilt: 91º • Saddle left tilt: 55º • Saddle right tilt: 16º

• Working load limit: 1,000kg • Working height: 940-1940mm • Ram travel 1st stage: 490mm • Ram travel 2nd stage: 510mm • Saddle forward tilt: 55º • Saddle backward tilt: 91º • Saddle left tilt: 55º • Saddle right tilt: 16º

latest applied technologies

USES CNC Y G TECHNOLO SUPERIOR L EE GRA DE ST

AIR ACTUATED

Professional Reputable Outstanding

$1049 All Prices include GST

Foot operated pump and release valve

Working height: Min. 940mm - Max. 1940mm

PROTL500A

4 way tilt action

No1

BEST SELLER PROTL1000

latest applied technologies

Professional Reputable Outstanding

$1449

USES CNC Y G TECHNOLO SUPERIOR L EE GRA DE ST

Working height: Min. 940mm - Max. 1940mm

• • • • • • • •

Foot operated pump and release valve

• HYDRAULIC PRESSES • CRANES • STANDS • RAMPS • BOTTLE JACKS • and more. . . .

Shop Presses

For full details on all products go to www.tqbbrands.com.au

Hydraulic Press 20,000kg 6 HEIGHT • Working load limit: 20,000kg • Work range: 50-890mm • Bed outside: 200mm • Bed inside: 96mm • Ram diameter: 105mm • 1560H x 700D x 600Wmm

Hydraulic Press 50,000kg

SETTINGS

• Working load limit: 50,000kg • Work range: 0-1035mm • Bed outside: 325mm • Bed inside: 126mm • Ram diameter: 65mm • 1600H x 800D x 1220Wmm

the trusted brand in equipment

1060T

Double spring ram

1600mm

1560mm

TRADE

2037TB Bed winch

BONUS OFFER! included

FEATURES Heavy-duty high-grade steel H-frame built for quality and durability. Welded frame prevents flexing under maximum load. Lead-free paint finish is oil, grease and dirt-resistant for easy cleanup. High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life. Piston-ram is treated and polished for extended life. High quality hydraulics oil offers better corrosion resistance and high/low temperature flexibility. Integrated overload protection valve prevents system overload. Extra-long handle included for easy pumping force.

No1

BEST SELLER

$399 600m

Hydraulic Press 20,000kg

Hydraulic Press 30,000kg

• Working load limit: 20,000kg • Work range: 130-705mm • Bed outside: 210mm • Bed inside: 106mm • Ram diameter: 105mm • 1510H x 700D x 665Wmm FULLY WELDED FRAME

• Working load limit: 30,000kg • Work range: 0-900mm • Bed outside: 315mm • Bed inside: 185mm • Ram diameter: 53mm • 1690H x 660D x 830Wmm FULLY WELDED FRAME

the trusted brand in equipment

1002

MADE FOR THE

TRADE

$2199 1220mm

9 HEIGHT SETTINGS

the trusted brand in equipment

TRADE

6 HEIGHT SETTINGS

$579 665m

1186T

1690mm

1510mm

MADE FOR THE FEATURES Heavy-duty H-frame constructed of highgrade steel and built to exacting standards for quality and durability. Welded frame prevents flexing under maximum load. Lead-free paint finish is applied after a thorough chemical wash to ensure a longlasting finish and to help prevent rust. Paint finish is oil, grease and dirt-resistant for easy cleanup. High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life. Dependable double spring return for fast ram retraction. Piston-ram is treated and polished for extended life. Reinforced head bolster for added strength. Pair of bed plates included.

100mm pressure gauge

the trusted brand in equipment

MADE FOR THE

FEATURES Heavy-duty H-frame constructed of high-grade steel and built to exacting standards for quality and durability. Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust. Paint finish is oil, grease and dirtresistant for easy cleanup. High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life. Dependable double spring return for fast ram retraction. Piston-ram is treated and polished for extended life. Reinforced head bolster for added strength. Pair of bed plates included.

6 HEIGHT SETTINGS

MADE FOR THE

TRADE

FEATURES Heavy-duty H-frame constructed of high-grade steel and built to exacting standards for quality and durability Welded frame prevents flexing under maximum load Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust Paint finish is oil, grease and dirt-resistant for easy cleanup High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life Dependable double spring return for fast ram retraction Piston-ram is treated and polished for extended life Reinforced head bolster for added strength Pair of bed plates included

All Prices include GST

$689 830mm

GARAGE JACKS • TRANSMISSION LIFTERS • FLUID HANDLING • WORKSHOP COOLING

BONUS OFFER

Press Adaptor Kit Code BPAK

Valued at

$ 155

100mm pressure gauge

9 HEIGHT SETTINGS

20,000KG CA PA CITY

Air Hydraulic Workshop Presses

• Working load limit: 50,000kg • Work range: 0-1035mm • Bed outside: 325mm • Bed inside: 185mm • Ram diameter: 60mm • 1600H x 800D x 1220Wmm AIR OPERATED

6 HEIGHT SETTINGS

100mm pressure gauge

Double spring ram

Bed winch

1600mm

Order one of these Workshop Presses & recei ve this bonus

Air Hydraulic Workshop Press 50,000kg

the trusted brand in equipment

TQHP50AB

BONUS OFFER! included $2399

MADE FOR THE

TRADE

FEATURES Heavy-duty high-grade steel H-frame. Two speed pump. Push-button air trigger ram travel control. Polished pneumatic aluminum air motor with polyurethane double seal setup. Lead-free paint finish for easy cleanup. Large diameter hydraulic steel cylinder unit results in lower oil pressure helping to reduce wear and extend service life. Piston-ram is treated and polished. High quality hydraulics oil. Integrated overload protection valve prevents system overload. Extra-long handle for easy pumping force.

9 HEIGHT SETTINGS

1220mm

100mm pressure gauge

30,000KG

20,000kg

50,000KG

CA PA CITY

BPROSP20TB

100mm pressure gauge

9 HEIGHT SETTINGS

CA PA CITY

BONUS OFFER! included $1369 760mm

50,000kg

BPROSP50TB Bed winch

Stamping Straightening Bending Pressing

BONUS OFFER! included $1979 LIMITED STOCK

BPROSP20TB BPROSP30TB BPROSP50TB Code 20,000kg 30,000kg 50,000kg Load Limit 58-1018mm 186-1126mm 88-1068mm Work Range 215mm 255mm 220mm Bed Outside 145mm 180mm 147mm Bed Inside 145mm 160mm 175mm Piston Ram Stroke 53mm 58mm 60mm Ram Diameter 1663Hx600Dx760W 1838Hx750Dx800W 1918Hx750Dx1030W Dimensions

800mm

INDUSTRIAL QUALITY All Prices include GST

1918mm

BPROSP30TB

1838mm

1663mm

30,000kg

Bed winch

BONUS OFFER! included $3299 1030mm

THESE BORUM WORKSHOP PRESSES FEATURE:

Heavy-duty high-grade steel H-frame. Integrated overload protection valve. Foot & Hand operated pump. 100mm pressure gauge. Safety mesh barrier. Lead free paint finish is oil, grease and dirt-resistant for easy cleanup. Piston-ram is fitted with backup ring, preventing bypass oil drift. High quality hydraulic oil offers better corrosion resistance and high temp flexibility.

• HYDRAULIC PRESSES • CRANES • STANDS • RAMPS • BOTTLE JACKS • and more. . . .

Shop Presses

For full details on all products go to www.tqbbrands.com.au

Air Hydraulic Press 30,000kg Working load limit: 30,000kg Working range: 25-850mm Overall height: 1800mm Overall width: 770mm Overall depth: 505mm Bed inside: 148mm Bed outside: 164mm Bed width: 600mm Screw adjustment: 75mm Ram diameter: 58mm Bed height settings: 6

PROSHPR30TA

latest applied technologies

Professional Reputable Outstanding

1800mm

6 HEIGHT SETTINGS

PREM IUM CE PERFORMA NON PRESENTA TI A ND REL IA BIL ITY

$2899

Air Hydraulic Press 50,000kg

• • • • • • • • • • •

Working load limit: 50,000kg Working range: 80-780mm Overall height: 1900mm Overall width: 930mm Overall depth: 535mm Bed outside: 220mm Bed inside: 200mm Bed width: 750mm Screw adjustment: 75mm Ram diameter: TBC Bed height settings: 6

PROSHPR50TA

Includes Foot Pedal Press Adapto rK & Parts Tray it These TQ Pro “Latest Applied Technologies” Air Hydraulic Workshop Presses are capable of bending, pressing or extruding and make light work of installing ball joints, U-joints and pulleys - making them ideal for many automotive and industrial applications. Polished inner cylinder walls extend the life of the hydraulic seals to minimize abrasion and wear, while the cylinder ram and pistons are also polished and chromed, guided by high performance seals, wear rings and dust seals. Includes a dial gauge for dual metric/tons pressure readings. The strong frames and powerful high-pressure hydraulics will provide years of dependable service in many applications. When components need to be removed or assembled, TQ Pro “Latest Applied Technologies” hydraulic presses deliver controlled power with precision and versatility! These TQ Pro hydraulic shop presses feature a fast-pump core that allows the pressure head assembly to lower and make contact with the work piece more quickly than the slow-pump core. The ram cylinder glides across the width of the upper frame allowing off-centre pressing. Includes a set of mandrill pressing attachments.

All Prices include GST

latest applied technologies

Professional Reputable Outstanding

6 HEIGHT SETTINGS

1900mm

• • • • • • • • • • •

PREM IUM CE PERFORMA NON PRESENTA TI A ND REL IA BIL ITY

$3899

GARAGE JACKS • TRANSMISSION LIFTERS • FLUID HANDLING • WORKSHOP COOLING

These “Borum Industrial” Air Hydraulic Workshop Presses are designed for automotive, truck, implement, fleet, and industrial repair shops where pressing, bending, straightening, forming, holding work requires high pressure hydraulics. Polished inner cylinder walls extend the life of the hydraulic seals to minimize abrasion and wear, while the cylinder ram and pistons are also polished and chromed, guided by high performance seals, wear rings and dust seals. Includes a dial gauge for dual metric/tons pressure readings. “Borum Industrial” Air Hydraulic Workshop Presses are available in a variety of capacities and sizes. The press frames are designed for maximum strength, reliability and durability. The strong frames and powerful high-pressure hydraulics will provide years of dependable service in many applications. When components need to be removed or assembled, “Borum Industrial” hydraulic presses deliver the controlled power to safely remove and install bearings, gears, U-joints, bushings, ball joints and pulleys with precision and versatility!

Air Hydraulic Press 75,000kg

Air Hydraulic Press 100,000kg

• Working load limit: 75,000kg • Working range: 170-884mm • Overall height: 1925mm • Overall width: 1146mm • Overall depth: 800mm • Bed inside: 279mm • Bed width: 800mm • Bed height settings: 8 • Operating air pressure: 110-125psi • Air inlet: 1/4”NPT • Nett weight: 451kg

• Working load limit: 100,000kg • Working range: 93-993mm • Overall height: 2048mm • Overall width: 1199mm • Overall depth: 990mm • Bed inside: TBCmm • Bed width: 787mm • Bed height settings: 6 • Operating air pressure: 110-125psi • Air inlet: 1/4”NPT • Nett weight: 662kg

BSP75TA

INDUSTRIAL QUALITY 100mm pressure gauge

EARLY DECEMBER DELIVERY

6 HEIGHT SETTINGS

100mm pressure gauge

2048mm

1925mm

8 HEIGHT SETTINGS

BSP100TA

INDUSTRIAL QUALITY

FEATURES

Heavy-duty H-frame constructed of highgrade steel. Foot operated air trigger ram travel control. 100mm pressure gauge. Table winch system lowers or raises the bed. Integrated overload protection valve keeps from overloading the system. Lead-free paint finish is oil, grease and dirtresistant for easy clean up. Extra tall working range for versatility. Pair of bed plates included.

FEATURES

1146mm

$5799

1199mm

All Prices include GST

$9499

• HYDRAULIC PRESSES • CRANES • STANDS • RAMPS • BOTTLE JACKS • and more. . . .

Fluid Handling

FEATURES Steel fabricated 90 Litre discharge tank. 150mm rubber wheels & 100mm swivel castors. Chrome plated dolly handle. 3 probe adaptors (2 nylon 6mm, 8mm, 1 copper 6mm). Venturi vacuum extracting system from dipstick. Easy to read vacuum gauge. Self evacuating makes emptying clean & easy.

$689 BONUS OFFER!

1046T

10 Litre vacuum chamber capacity

MADE FOR THE

BONUS OFFER

Fluid sight tube

30 Litre SPILLFIX Valued at

$ 32

TELESCOPIC COL L ECT STORE CA R RY DISCHA RGE

Code TQSPILLFIX

• Bowl capacity: 20 Litres • Bowl: 515L x 515H x 230Hmm • Height: 1175-1850mm • Size of hole in bowl to fit standard - 38ID • Bowl available separately Code:1901 • Bowl seal kit available separately Code:1902 • Other spare parts also available on request the trusted brand in equipment

1010

$155

Heavy Duty ABS drain bowl

MADE FOR THE

TRADE

FEATURES Simple waste oil & ATF disposal system. Square lightweight polymer drain bowl. Telescopic height adjustment with positive lock. Adaptor for emptying oil into bulk waste oil tanks.

205L drum drain adaptor

Telescopic height adjustment

TRADE

Fluid sight tube

TELESCOPIC COL L ECT STORE CA R RY DISCHA RGE

FEATURES Collect, transfer, evacuate used engine oils, transmission fluids, power steering fluids etc. Top quality heavy-gauge steel collection tank. Adjustable telescopic drain pan. Offset drain bowl eliminates the need to reposition the tank. Tank oil level indicator sight gauge. Air pressure relief valve prevents overpressurisation. Sturdy rubber front wheels and ball bearingmounted rear castors provide stability and easy maneuverability. Lead-free paint is oil, grease and dirtresistant for easy cleanup. Oil, heat, ozone and abrasion resistant hose. Easy to clean chrome handle.

$339

Self-Evacuating Oil Drainer Extractor 115 Litre • Capacity: 115 Litres • Working height: max. 1850mm • Discharge pressure: 12psi • Telescopic adjustment • Discharge hose length: 1940mm • Air inlet: 1/4” BSP

Suitable fo r Engines wit h or without Sump Plugs

BOD1908

SPARE PARTS & SUPPORT AVAILABL E LOCALLY

INDUSTRIAL QUALITY

Quick easy detachable fitting Positive friction telescopic lock

No1

BEST SELLER

Max. height - 1850mm

Telescopic Oil Drainer 20 Litre

• Capacity: 65 Litres • Working height: 850-1650mm • Discharge pressure: 12psi • Telescopic adjustment AIR • Fluid sight tube OPERATED • Air inlet: 1/4” BSP • Ball bearing castors the trusted brand in equipment

included

Order this TradeQuip Self-Evacuating Oil Drainer & recei ve this bonus

Self-Evacuating Oil Drainer 65 Litre

Telescopic height adjustment

TELESCOPIC COL L ECT STORE CA R RY DISCHA RGE FEATURES Telescopic steel oil pan. 150mm rubber wheels and 100mm swivel castors. Chrome plated dolly handle. 6 probe adaptors. Venturi vacuum extracting system from dipstick. Easy to read vacuum gauge. Self evacuating makes emptying clean & easy.

All Prices include GST

Working height - max. 1850mm

the trusted brand in equipment

1907TB

TRADE

Working height max. 1850mm

• Capacity: 90 Litres • Working height: max. 1850mm • Discharge pressure: 12psi • Telescopic adjustment • Discharge hose length:1940mm • Air inlet: 1/4” BSP

Suitable fo r Engines wit h or without Sump Plugs

Working height - 850 - 1650mm

Self-Evacuating Oil Drainer 90 Litre MADE FOR THE

For full details on all products go to www.tqbbrands.com.au

$879

GARAGE JACKS • TRANSMISSION LIFTERS • FLUID HANDLING • WORKSHOP COOLING

Truck Oil Drain Pan 60 Litre • Enamel steel construction • Oil and coolant resistant • Size: 1174 x 641 x 673mm • Front swivel castors

Truck Fluid Drain Pan with Hand Pump 65 Litre

ENAMEL STEEL CONSTRUCTION

Removable metal filter screen

the trusted brand in equipment

Built-in rotary hand discharge pump

the trusted brand in equipment

1146T FEATURES Enamelled steel construction. Oil and coolant resistant. Removable metal screen. Two fixed rear castors. Two front swivel castors. Drain valve. Grab handle.

• Industrial plastic • Oil and coolant resistant • Manoeuvrable 4” castors • Tank size: 1300x730x200mm

1147

$229

MADE FOR THE

TRADE

FEATURES Lightweight high-impact polypropylene. Suitable for engine oil, coolant and transmission fluid. Built-in rotary hand discharge pump. Removable metal filter screen. Smooth rolling rubber castor wheels.

Removable metal filter screen

Lightweight polyethylene tank

Front swivel castors

$599 Drum Pump 205 Litre

• Drum size: 205 litres • Flow rate: 280ml per rotation • Suction tube: 1m max. length • Adapter: 2” bung adapter • Fluid types: Diesel, Oil, Kerosene only. the trusted brand in equipment

• Hose I.D.: 13mm (1/2”) • Hose length: 10m • Max. oil pressure: 2,000PSI • Air inlet: 1/2”-18NPT • Hose colour: Black • Reel colour: Grey

Do NOT use this pump for water, chemical or corrosive solvents, acid or alkaline fluids.

INDUSTRIAL QUALITY

BHR1997

Designed to suit 205L drums and barrels. Easy to use hand-operated rotary hand pump. Quality corrosion resistant finish. Self priming with easy spin handle.

INDUSTRIAL QUALITY

the trusted brand in equipment

1.6 metre Hose

PP8805G FEATURES

Suits all 20L metal and plastic containers. Telescopic extension. Easy down stroke displacement. Spring wound kink free hose. Anti-drip nozzle and drain back nozzle holder. Ground shaft with ‘O’ ring seal. Nylon head and handle.

AUTO REWIND

$119

FEATURES

• Drum size: 20 litres • Fluid type: Suitable for oil • Strokes per litre: 16 • Hose length: 1.6m

TRADE

Oil Hose Reel 1/2” X 10 Metre

INDUSTRIAL QUALITY

RFP20C

Drum Pump 20 Litre

MADE FOR THE

$69

$399 FEATURES

Includes rubber oil resistant hose with neoprene shell. Machined brass fittings. Mounts to floor, wall or ceiling. Auto-rewind feature quickly retracts the hose. Ratchet mechanism locks hose at desired length. Reinforced guide arm provides support and stability. Heavy-duty steel construction with powder-coat finish protects against corrosion. Ball bearing swivel joint reduces friction. Four directional rollers reduce abrasion to the rubber hose.

All Prices include GST

• HYDRAULIC PRESSES • CRANES • STANDS • RAMPS • BOTTLE JACKS • and more. . . .

Cooling & Ventilation Industrial Pedestal Misting Fan 650mm

Retractable Cable Reel 15 Metre • Amperage: 10A • Cable length: 15m • Cable colour: Black • Reel colour: Blue

0 WATT • 240V/50Hz/260W 26 3 SPEED 3 speed motor MOTOR • 90º Oscillation • Water shortage protection. • Adjustable mist-Exit Vol: 0-16KG/Hr • Effective spray distance: 8-10mtr • Drop the temperature: 2-8ºC • Suitable for cooling people, stockbreeding or greenhouse applications.

$155

For full details on all products go to www.tqbbrands.com.au

Industrial Pedestal Fan 750mm 3 SPEE

D MOTOR

Cast aluminium blade

the trusted brand in equipment

1994T

A U TO RE WIND

the trusted brand in equipment

1182T

MADE FOR THE

TRADE

$659

Great Accessory Option

Industrial Wall Mounted Fan 750mm • 240V/50Hz/280W 3 speed motor • 750mm aluminium 3 blade fan • 0º to 90º oscillating angle or fixed • Heavy duty wall fixing plate • Air Flow: Up to 300m3/min • Metal oscillating gears

Cast aluminium blade

MADE FOR THE

3 SPEED MOTOR

TRADE

Chrome steel cage

Lightweight Portable Floor Fan 450mm

3 SPEED MOTOR

• 240V/50Hz/220W 3 speed motor • 450mm steel 3 blade fan • Adjustable flow angle the trusted brand in equipment

Chrome steel cage

All Prices include GST

Workshop Wall Mounted or Pedestal Fans 750mm Great • 240V/50Hz 3 speed motor Value for • 750mm cast aluminium 3 blade fan • 0º to 90º oscillating angle or fixed Money • Air flow: Up to 280m /min • Powder coated cage

TRADE

RED LABEL

Cast aluminium blade Adjustable height 1235-1760mm (Blade centre)

$139

TRADE

MADE FOR THE

3 SPEED MOTOR

MADE FOR THE

Cast iron base

$199

1026

$189

Chrome steel cage

the trusted brand in equipment

1015

the trusted brand in equipment

1045

• 240V/50Hz/280W 3 speed motor • 750mm aluminium 3 blade fan • Adjustable height: 1235-1760mm (Blade centre) • 0º to 90º oscillating angle or fixed • Air flow: Up to 300m3/min • Metal oscillating gears

RL750FAN Stable rubber base

GREAT PRICE!

$159

3 SPEED MOTOR

GREAT PRICE!

$149 Includes sturdy wall mount bracket

Cast aluminium blade

RL750WALL

GARAGE JACKS • TRANSMISSION LIFTERS • FLUID HANDLING • WORKSHOP COOLING

Portable Evaporative Cooler 550W • 240V/50Hz/550W 3 speed motor • Max. air flow: 18,000 m3 per hour • Effective cooling area: 100-150sqm • Water consumption: 12-18 litres per hour • Water tank capacity: 100 Litres • 1510H x 1120W x 680Dmm • Nett weight: 58kg

Portable Evaporative Cooler 750W

550 Watt 3 Speed Mot or 3 Blade Fan

MADE FOR THE

TRADE

EUROPEAN DESIGN SYNCHRONOUS SWING FUNCTION

STAY COOL!

the trusted brand in equipment

1027T

• 240V/50Hz/750W 3 speed motor • Max. air flow: 21,500 m3 per hour • Water consumption: 20-35 litres per hour • Effective cooling area: 200-260sqm • Cooling area: 200-260m2 • Water tank capacity: 200 Litres • 1800H x 1600W x 780Dmm • Nett weight: 128kg

1029T

STAY COOL!

ALL COOLERS FEATURE Moulded polyethylene housing will not crack and is rust and leak proof. Environmentally-friendly alternative to traditional reverse cycle A/C. Cools without chemicals or refrigerants. Long-term dependability. Near maintenance free operation. Cools where traditional cooling methods are impractical or cost-prohibitive. Easy to read water level sight tube gauge. Dual pour in refill water inlet and/or 3/4” hose fitting for automatic tap refill. Adjustable water flow and drain valve. Direct drive. LCD 24 hour timer panel. Nylon castors for easy portability. Remote control speed adjustment.

$1099

750 WATT 3 SPEED MOTOR

“Freight Rates May Apply”

Portable Evaporative Cooler 750W • 240V/50Hz/750W 3 speed motor • Max. air flow: 23,000 m3 per hour • Effective cooling area: 150-200sqm • Water consumption: 12-18 litres per hour • Water tank capacity: 130 Litres • 1730H x 1120W x 680Dmm • Nett weight: 63kg the trusted brand in equipment

MADE FOR THE

TRADE

750 Watt 3 Speed Mot or 5 Blade Fan

$4599

“Freight Rates May Apply”

Portable Ventilation Fans the trusted brand in equipment

1035T

Available separately

5m Flexible Ducting 300, 400 & 450mm diameter

10m Flexible Ducting 300mm diameter only

STAY COOL!

ALLOY MULTI-BLA DE FANS

EUROPEAN DESIGN SYNCHRONOUS SWING FUNCTION

Includes 5 metre flexible ducting (flame resistant)

$1449 “Freight Rates May Apply”

All Prices include GST

MADE FOR THE

TRADE

Code Fan Diameter Voltage Power Speed Noise Level Air Delivery Static Pressure Price

FROM

$249

1025 300mm 240V 50Hz 520W 2800rpm 52db2 (A) 60m3per minute 343Pa

1056 400mm 240V 50Hz 1100W 2800rpm 92db2 (A) 96m3per minute 700Pa

1141 450mm 240V 50Hz 1700W 2800rpm 92db2 (A) 162m3per minute 972Pa

$249

$639

$749

• HYDRAULIC PRESSES • CRANES • STANDS • RAMPS • BOTTLE JACKS • and more. . . .

Cooling & Ventilation

For full details on all products go to www.tqbbrands.com.au

TradeQuip “Made for the Trade” Portable Industrial Air Conditioners are designed for economical spot cooling in workshops, service rooms, warehouses and offices especially where other electrical equipment creates a heat load. These TradeQuip Portable Industrial Air Conditioners are completely self-contained and housed within an insulated cabinet. The unit’s exterior is constructed of galvanized steel and protected with a tough powder-coated, polyester finish. All models are equipped standard with heavy-duty castors for easy portability. TradeQuip Portable Industrial Air Conditioners bring in air from an outside source to cool its condenser, cycling hot air to an outside source. This provides a fresh cool air room temperature with high efficiency. Just wheel it in, plug it in and it goes to work immediately, giving high cooling capacity to help wherever and at whatever point you require it. Like all air conditioning systems, TradeQuip Portable Industrial Air Conditioners extract heat which must be expelled outdoors and the TradeQuip units do this through an exhaust tube which can easily be directed from the appliance to a window opening or doorway. With their compact size, these TradeQuip “Made for the Trade” Portable Industrial Air Conditioning units are perfectly suited to smaller work areas, yet still deliver an impressive amount of air output. With the substantial ‘instant’ changes in the air temperature, a portable industrial air conditioner is perfect for cooling hard working people or spot cooling of rooms, workshops, factories, laundries, schools, agricultural sheds, and more.

Portable Air Conditioner - 2.7KW MADE FOR THE • Power unit: 240V 50Hz • Rated power: 950W TRADE • Rated current: 4.2A • Cooling capacity: 2.7KW / 9200Btu • Max. air flow: 400m3 per hour • Noise level: 55dB(A) • Operating temperature: 18° - 45°C • Suction pressure: 2.5Mpa (Max.) • Discharge pressure: 4.5Mpa (Max.) • Speed control: 2-speed • Refrigerant: R410/460g • Condensation tank capacity: 5 Litres • Castor wheels: 75mm Dia (2 with brakes) • 855H x 430W x 405D the trusted brand in equipment

1031T

Portable Air Conditioner - 4.5KW MADE FOR THE • Power unit: 240V 50Hz • Rated power: 2000W TRADE • Rated current: 9.0A • Cooling capacity: 4.5KW / 15300Btu • Max. air flow: 800m3 per hour • Noise level: 60dB(A) • Operating temperature: 18° - 45°C • Suction pressure: 2.5Mpa (Max.) • Discharge pressure: 4.5Mpa (Max.) • Speed control: 2-speed • Refrigerant: R410/800g • Condensation tank capacity: 5 Litres • Castor wheels: 75mm Dia (2 with brakes) • 1035H x 520W x 480D

Portable Air Conditioner - 6.5KW MADE FOR THE • Power unit: 240V 50Hz • Rated power: 3000W TRADE • Rated current: 13.5A • Cooling capacity: 6.5KW / 22200Btu • Max. air flow: 1200m3 per hour • Noise level: 65dB(A) • Operating temperature: 18° - 45°C • Suction pressure: 2.5Mpa (Max.) • Discharge pressure: 4.5Mpa (Max.) • Speed control: 2-speed • Refrigerant: R410/800g • Condensation tank capacity: 5 Litres • Castor wheels: 75mm Dia (2 with brakes) • 1245H x 640W x 560D

the trusted brand in equipment

1032T 950 WATT 2 SPEED MOTOR

$1449

1033T 3000 WATT 2 SPEED MOTOR

2000 WATT 2 SPEED MOTOR

$2859 $3999

TradeQuip “Made for the Trade” Portable Air Conditioners offer a quick cooling solution with “plug and play” technology that tops the competition with their small size, strong air flow, and easy installation. All Prices include GST

GARAGE JACKS • TRANSMISSION LIFTERS • FLUID HANDLING • WORKSHOP COOLING

Drill Presses 3/4HP Pedestal Drill Press 16 Speed

ALL DRILL PRESSES FEATURE

Flexible worklight. Engineering style work table. Oversize micro-switch activated safety guard. Low-noise belt drive with cast iron balanced pulleys ensures low maintenance and quiet operation. Safety ON-OFF switch fitted with a dust cover and positive action push buttons plus a large (Red) self locking “Emergency Stop” hinge cover. Precision spindle bearing for long life and high accuracy. Table control via hand crank and gear rack is robust with high load capacity. Long quill stroke with easy to adjust depth stop at the capstan handle. Thick-walled, precision-ground column for extra rigidity. Powerful long-life commercial drive motor provides high reliability. Ground set-up areas on table and base plate. Solid rotating work table with diagonal clamping slots. Full range of Spare Parts available in Australia!

CH16NFT

Max. DRILL

CAPACITY • Motor: 240Volt 3/4HP 16MM • Number of speeds: 16 • Spindle taper: MT2 • Spindle speeds: 162-3000rpm • Max. drilling capacity: 16mm • Max. spindle stroke: 78mm • Max. distance spindle to table: 7810mm • Max. distance spindle to base: 1219mm • Chuck: 16mm • Swing: 535 • Size of table: 473x410mm • Diameter of column: 73mm • Size of base: 450x265mm • Overall height: 1588mm

3/4HP Bench Drill 16 Speed CH16NT • Motor: 240Volt 3/4HP • Number of speeds: 16 Max. DRILL • Spindle taper: MT2 CAPACITY • Spindle speeds: 162-3000rpm 16MM • Max. drilling capacity: 16mm • Max. spindle stroke: 78mm • Max. distance spindle to table: 4435mm • Max. distance spindle to base: 610mm • Chuck: 16mm • Swing: 350mm • Table diameter: 290mm • Diameter of column: 73mm • Size of base: 440x250mm • Overall height: 1000mm

$949

INDUSTRIAL QUALITY

The same reliable ‘Heavy Duty Industrial Quality Drill Press’ since we started manufacturing them in 1984... but with the benefit of some 21st Century features.

INDUSTRIAL QUALITY

$999

Max. DRILL CAPACITY 20MM

1HP Pedestal Drill Press 16 Speed

CH30T

CH18FT • Motor: 240Volt 1HP • Number of speeds: 16 • Spindle taper: MT2 • Spindle speeds: 200-3160rpm • Max. drilling capacity: 20mm • Max. spindle stroke: 82mm • Max. distance spindle to table: 775mm • Max. distance spindle to base: 1270mm • Chuck: 16mm • Swing: 430mm • Table diameter: 350mm • Diameter of column: 80mm • Size of base: 460x270mm • Overall height: 1625mm

INDUSTRIAL QUALITY

$1297

2HP Pedestal Drill Press 12 Speed

All Prices include GST

Max. DRILL CAPACITY 32MM

INDUSTRIAL QUALITY

• Motor: 240Volt 2HP • Number of speeds: 12 • Spindle taper: MT4 • Spindle speeds: 210-2160rpm • Max. drilling capacity: 32mm • Max. spindle stroke: 122mm • Max. distance spindle to table: 720mm • Max. distance spindle to base: 1230mm • Chuck: 16mm • Swing: 535 • Size of table: 473x410mm • Diameter of column: 92mm • Size of base: 572x495mm • Overall height: 1780mm

$2299

“Borum Industrial Drill Presses” deliver precision and power... and are designed to handle the demands of a professional workshop environment. With a powerful long-life industrial quality motor (that’s fully enclosed in a durable metal hood) double-wide spindle bearings and a precision spindle, they are very reliable drilling machines. Perfect for fabricators looking for a drill press that’s rugged enough to handle the demands of light and medium duty production work and accurate enough to consistently deliver precise results. These robust and user-friendly drill presses are ideal for a busy maintenance workshop or small production factory.

• HYDRAULIC PRESSES • CRANES • STANDS • RAMPS • BOTTLE JACKS • and more. . . .

Cooling & Ventilation Portable Evaporative Cooler 750 Watt the trusted brand in equipment

MADE FOR THE TRADE

STAY COOL!

1035T

GO TO PAGE 17 FOR FULL DETAILS

4 4 4

IGN EUROPEAN DES S SYNCHONOROU ON SWING FUNCTI OL REMOTE CONTR

NEW! Product Guid es Out Now For full details go to www.tqbbrands.com.au

750 Watt 3 Speed Mo tor 5 Blade Fan

Check out our new range of TradeQuip Portable Air Conditioners on page 18

MADE FOR THE

TRADE

Huge 150-200sqm Cooling Area 130 Litre Water Tank Massive Air Delivery of 23,000 m3 per hour

$1449 All Prices include GST

Available From

Some items may not be stocked in all stores but will be ordered as required. Prices are valid while stocks last and are subject to plus freight where applicable. Sale ends 31 December 2019.

ABN 20 932 104 369