Product Data Sheet
When power matters, trust the Performer The ROAMIO Performer delivers power when it matters the most. Performer is designed around our Power United philosophy: Proven, reliable power that integrates and works flawlessly with existing power sources and applications. The ideal back up power source for critical applications, Performer integrates seamlessly with grid, generator, wind, or solar power. The Performer is the assurance you need and want that critical applications will run, uninterrupted, when other power sources fail. Our fuel cells are field-proven by the military, and guaranteed to work in harsh environmental conditions. The Performer is ideal power in inaccessible, remote, or hazardous locations. Powered by commercially available LP, the Performer is low maintenance: Connect it to a tank of propane and leave it to work on the side of a mountain, in a dense forest, tundra or desert, miles from civilization. The ROAMIO Performer fuel cell provides the power your applications need without any of the logistics and concerns you don’t.
Power Continuous Charge Power
250
W
12-24 Nominal
VDC
20 – 10
A
Fuel Efficiency (LHV)
20%
-
Standby Power Draw
Operating Voltage Nominal Charging Current
<0.01
W
Operational Cycles Before Overhaul
250
Cycles
Operational Hours
3000
Hours
Operating Temperature
-20 to 50
°C
Storage Temperature
-60 to 70
°C
Humidity
0%-95%*
RH
10,000
ft
23.5 (10.7)
lbs. (kg)
Noise
40
dB (A)
Max Exhaust Temperature
90
°C
Emissions CO2
0.71
lbs./Charge hour
Digital Interface
Serial RS232 9600 8N1
-
Environments
Operating Altitude
Operation Weight
User Interface
LCD
Cooling Air Consumption
90
CFM
Fuel Consumption LP
0.25
lbs/hour
Fuel Consumption CNG
0.167
m3/day
Fuel Operating Pressure
6-20
psi
APPLICATIONS
Remote security Traffic monitoring and management Telecommunications Weather stations Data collection and monitoring Pipeline monitoring and protection LiDar SCADA Rail Signals and Controls
BENEFITS
Reliable Efficient Across Its Operating Temperatures Configurable to a variety of battery types and voltages Simple installation and operation Significant power savings when paired with solar and or wind Remote System Monitoring
*non-condensing
BSS Holland BV – Daalwijkdreef 47 – 1103 AD – Amsterdam – T: 020-7162421 – E: info@bssholland.com
Product Data Sheet
System Description The goal is more time between refuel and service. Minimize logistics cost The P250i uses any commercial LP gas source to produce efficient power up to 250 Watts Our fuel cells Cycle on and off managing the battery charge with temperature compensation through the use of sensors and software Filtration of fuel, filtration of air, fuel replenish designed to meet our customers PM schedule Designed to integrate into our line of NEMA enclosures with batteries, solar controls, DC-DC converters, fused, external communications computers, modems, and our customer’s electronics
Advantages over other power sources Solar- Not available all the time in extreme environments and certain climates Generator – High maintenance cost, non-environmentally friendly exhaust, total logistics cost to fuel and maintenance Wind
Battery Tending Application TEG (Thermoelectric Generator) 10 psi Fuel Supply
Fuel Cell System
External Communications RS232, I/O
To External Load
Temperature Sense Voltage Sense
Battery Bank
Fuel Tank(s)
Application Examples Example Application Scada System Video Monitoring LiDar Cathodic Protection
Average Load 50 100 150 200
4 X 100 lbs. Tanks 4 X 100 lbs. Tanks 6 X 100 lbs. Tanks 4 X 100 lbs. Tanks
12 Months 6 Months 6 Months 3 Months
BSS Holland BV – Daalwijkdreef 47 – 1103 AD – Amsterdam – T: 020-7162421 – E: info@bssholland.com
Product Data Sheet Example of Active Battery Temperature Monitoring Calibration Smart Charging The system utilizes a remote temperature probe (supplied in main output harness) to detect the actual battery temperature. This is then used to determine the optimal battery voltage to switch the P250i on and off. This ensures maximum use of capacity, battery life, and safety. These values can be adjusted to accommodate any battery chemistry and can be configured for the application
BSS Holland BV – Daalwijkdreef 47 – 1103 AD – Amsterdam – T: 020-7162421 – E: info@bssholland.com