Futaba Transmitter
Futaba Transmitter Futaba transmitter is a simple AC powered Futaba r/c charger. Most of the futaba radio system includes this charger. This simple charger uses any 110 volt AC wall outlet and has 6 foot charging leads. With this Futaba charger, it is possible for you to charge both NiCad and NiMH batteries; it will charge both your transmitter and receiver battery simultaneously.Futaba transmitter can use receivers of these types. R127DF, R138DF, R138DP, R148DF, R148DP, R149DP. You can have a variety of Futaba transmitter from various websites. Futaba Transmitter and receiver Combo 6CH 2.4 GHz is now available at www.frbiz.com. It based on Futaba 6EX and is specially designed for 3D helicopters. It is more convenient for operation with some of the specification like 6ch 2.4G Transmitter and receiver, 2 stick, 6ch system operation system etc.
Futaba 6EX The case of the Futaba 6EX is unquestionably plastic, typical of sport level systems. It is black with a chrome gimbal surround. It is comfortable to hold, but with the short antenna, it does have a slightly bottom heavy balance point when using a neck strap. The program screen is located at the bottom of the case. The switch and buttons are very well labeled and easy to actuate. The programming buttons consist of two push buttons and a data input “up and down� selection switch. The stick gimbals and switches are comfortably placed. The gimbals have firm spring tension (my preference) and the sticks have heavy knurling on the knob tops. The standard switch placement is welcomingly familiar with the transmitter - flap on the right side and gear on the left. The switches trigger with a positive audible click and have a solid feel to them. They are short, stout and placed in such a way that I found them easy to actuate and hard to break.