Motor and Motor Driver Boards
•
A motor driver IC is usually used to control motors in autonomous robots. Motor driver ICs act as an interface between microprocessors in robots and the motors in the robot. Respective IC’s receive signals from the microprocessor and transmits the relative signal to the motor. This way output signal is received according to the input applied.
Motor and Motor Driver Boards •
Buy motor driver board, buy motor india, motor board, buy motor driver, motor board india, motor board price india at reasonable prices from Robomart. The Motor Board may be used to lead two 12V DC motors. Your kit contains 2 of those boards to permit you to manage up to four motors. These may be used for moving your mechanism, though do not feel you're restricted to deception them for this purpose.
•
Follow This Link: https://www.robomart.com/motor-and-motor-driverboards
• Controlling MCU power supply: 6.5~12 V or 3.5~5.5V. • Servos power supply: DC (depends on the motors, generally 5V DC). • Control channels: 32. • Communication Input: USB or UART (TTL or USART). • Signal Output: PWM (Accuracy 1us). • Servo motor resolution: 1us, 0.09 degrees. • Baud Rate: 9600,19200,28400,57600,115200,128000(recognized automatically). • Servo motors supported: Futaba, Hitec or some other Servos Motor controlled by PWM. • Dimensions: 63.5mm x 43.5mm x 1.6mm. • Control mode: USB and UART (TTL) to accept command. • Flash: onboard 512K ROM. • Dimension: 63.5mm x 43.5mm x 1.6mm
B5, C Block First floor C-Block, Above IOB Bank, Sec-31, Noida-201301 (Uttar Pradesh) India 0120-4317229 +91-8744000555 admin@robomart.com https://www.robomart.com