2015 VOLUME7 Buyer's Guide by Rockford Fosgate

NEW PRODUCTS

NEW POWER SUBWOOFER

AMPLIFIERS READY FOR THE ELEMENTS

POWERPUNCH

MARINE

SOURCE UNITS & REMOTES

NEW

POWER SLIM

BUYER’S GUIDE CONTENTS

MOBILE AMPLIFER FAMILIES

TECHNOLOGIES AMPLIFIER

LINE UP AMPS COMPARED

GUTS OF AN AMPLIFIER

MOBILE SUBWOOFER FAMILIES

TECHNOLOGIES SUBWOOFER

LINE UP SUBS COMPARED

ANATOMY OF A SUBWOOFER

MOBILE SPEAKER FAMILIES

TECHNOLOGIES SPEAKER

LINE UP SPEAKERS COMPARED

FRAMEWORK OF A SPEAKER

VEHICLE INTEGRATION PRODUCTS

MOTO/MARINE AMPLIFER FAMILIES

GUTS OF AN AMPLIFIER

MOTO/MARINE SUBWOOFER FAMILIES

103

ANATOMY OF A SUBWOOFER

107

MOTO/MARINE SPEAKER FAMILIES

111

FRAMEWORK OF A SPEAKER

117

MOTO/MARINE SOURCE UNITS AND WIRED REMOTES

121

DNA OF A SOURCE UNIT

127

MOTORCYCLE AUDIO PRODUCTS

117

©2015 Rockford Corporation. All Rights Reserved. ROCKFORD FOSGATE®, PUNCH®, 3SIXTY® and associated logos where applicable, are registered trademarks of Rockford Corporation in the United States and/or other countries. iPhone and iPod are trademarks of Apple Inc., registered in the U.S. and other countries. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Rockford Corporation is under license. The word Harley-Davidson® is a registered trademark of Harley-Davidson, Inc. and is for reference only. The BMW® name is a registered trademark and is for reference only. All other trademarks are the property of their respective owners. Specifications subject to change without notice. “Made for iPod” and “Made for iPhone mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance.

AMPLIFIERS SUBWOOFERS SPEAKERS

AMPLIFIERS AMPLIFIERS

UNPRECEDENTED POWER AND CONTROL

YEAR

LIMITED WARRANTY

OHMS

YEAR

dB/OCT

12/24 2 +1 2/1

CROSSOVER SLOPE

FREE* EXTENDED WARRANTY

IMPEDANCE STABILITY

HISTORY OF PERFORMANCE

dB/OCT

CROSSOVER SLOPE

YEAR

OHMS

YEAR

1 +1 4/2 LIMITED WARRANTY

FREE* EXTENDED WARRANTY

IMPEDANCE STABILITY

THE PERFECT FIRST STEP

LIMITED WARRANTY

OHMS

YEAR

dB/OCT

12 1 4/2

CROSSOVER SLOPE

IMPEDANCE STABILITY

*WITH QUALIFYING ROCKFORD FOSGATE INSTALLATION KIT PURCHASE

DELIVERING UNPRECEDENTED POWER AND CONTROL A culmination of over 30 years of pushing the envelope in amplifier design, the Power series of amplifiers takes everything that we’ve learned about power output and heat management and puts it into a single package. With technologies such as our Class AD and BD constant power circuits, Rockford engineers squeeze every drop of power out of these amps they can get. So, not only will your system be the envy of all your friends because it’s the

MODELS SHOWN | T400-2, T2500-1bdCP, T400-4, T1000-4ad

2015 BUYER’S GUIDE

loudest, but it’s going to sound amazing to boot. Heat management is always a concern. Too much heat will not only shut down your amp but may eventually kill it. We combat this by using specially designed cast aluminum heat sinks as well as our latest Dynamic Thermal Management circuitry to maximize performance while managing the heat production. Simply put, a cooler amp is a happy amp and will run for a very long time.

ALL THE POWER, HALF THE SPACE After seeing a demand in the marketplace for small chassis amplifiers, our engineers took amplifier design to the next level. They designed amplifiers that could fit in small spaces but also deliver on power and performance. The goal set was to take the elements of our larger chassis Power series amplifiers, along with our latest technology, and put them in a smaller footprint design without sacrificing power or performance. Thus, our Power small chassis amplifiers were born. These amplifiers are built on our proven Class AD and BR circuit designs allowing the amplifiers to be over 40% smaller while producing more power than the comparable full size Power version. Heat is managed with our 3-stage cooling system using forced induction air flow allowing you to really push these amps without concern of overheating.

MODELS SHOWN | T500X1br, T400X2ad

PRODUCING MORE POWER THAN EVER BEFORE Building on the legacy that began over 35 years ago, we completely redesigned our Punch series. This was not just a refresh of their look but also the perfect time to add-in the latest innovations in amplifier design. With a sleek new style thanks to our brushed, cast aluminum chassis with stealth top mount controls, these new Punch amplifiers truly grab the attention of anyone who sees them.

MODELS SHOWN | P1000X1bd, P400X2, P300X2, P1000X5

2015 BUYERâ&#x20AC;&#x2122;S GUIDE

But of course, these amps are more than just pretty, theyâ&#x20AC;&#x2122;re feature rich and powerful. One such innovation is our CLEAN setup circuit which not only tells you if and when your music is distorting, but simplifies the setup of the amp. This gets you listening to your music that much faster. Power has also been addressed in the new circuit design with all models easily exceeding their rated power which means not only is your music clear, but it can get plenty loud.

BOOSTED RAIL

IDEAL FOR ALL YOUR MOBILE TOYS Rockford’s original small chassis amplifier, the PBR series was developed with a few goals and a select group of customers vehicles in mind. We wanted a small footprint amplifier that produced a lot of power but didn’t put a strain on a vehicles electrical system. We had our eyes on the motorcycle and UTV markets knowing that audio solutions for many of these customers were few and what was available wasn’t the highest in quality.

MODELS SHOWN | PBR500X1br, PBR300X4

We developed the PBR amps to be ultra-efficient by using the vehicle’s own electrical system for a power supply and developed our patented “boosted rail” circuit that stores energy and then releases it when the demands of the music require it. This means that when you hit the road or the trails, you can enjoy your music knowing it is powered by an amplifier built to Rockford’s high standards.

MODELS SHOWN | R600X5, R1200-4D, R400-4D

2015 BUYER’S GUIDE

THE PERFECT STARTING POINT Our prime amplifiers are a great first choice to get you going. Whether you’re looking to get into your first audio system or just looking for a Rockford quality amplifier that isn’t going to break the bank, look no further than the Prime series of amplifiers. Many of the design innovations that we’ve developed over the years, from how to deal with heat to maximizing the efficiency of the power supply, have made their way into the Prime amps allowing us to create a line that is not only high quality, but also at an affordable cost to you, the customer. And, like all Rockford amplifiers, we make sure that these not only meet, but exceed their rated power to ensure that you get every watt possible that you’ve paid your hard earned money for. Incorporating features such as variable crossovers and our famous Punch EQ circuit further completes the package making the Prime amplifiers a perfect choice for your audio system.

When you make a product purchase that bears the Rockford Fosgate name, you are receiving the technology, engineering, and innovation that has taken over three decades to hone. Our constant desire to push the performance envelope has led us to develop proprietary amplifier topologies and acoustic/electrical technologies that put a spin on the normal and make it Rockford.

+20 +18 +16 +14 +12

PUNCH EQUALIZATION

+10

U.S. Patent (3,883,832)

+8 +6 +4 +2 -0 -2

100

200

500

BASS

10k 20k

TREBLE

In the early 70’s, Jim Fosgate studied the acoustical properties of automobiles by using a real time analyzer. Jim discovered multiple problems common in all vehicles; a midbass hump, a steep high frequency roll off and reduced bass response. This research lead to adding Punch EQ to Rockford Fosgate amps to help correct the acoustical deficiencies found in the automotive listening environment. The new Punch EQ2 is an on-board equalization circuit that when set to Low-Pass (LP) operation, becomes a variable Bass Boost. When set to High-Pass (HP) operation, it acts as a variable Mid-Bass and Treble Boost. When set to All Pass (AP) operation, both Bass and Treble frequencies are boosted.

Products Featuring: on-board PUNCH EQ

HEATSINK

ALUMINIUM

MOSFET

THERMAL GREASE CERAMIC

MAXIMUM EFFICIENCY HEAT SINK APPLICATION MEHSA3 heat management technology takes heat sink efficiency to a new level. The key was to create a dielectric layer between the ceramic topside and the aluminum base that retains all of the electrical isolation and capacitive coupling of the early material increasing its thermal conductivity. The higher power handling results in a 20% reduction in thermal impedance.

Products Featuring: MEHSA

4/2/1 The ability to deliver continuous total RMS rated power to the speaker(s) in any impedance ranging between 4 ohm through 1 ohm.

Products Featuring: 4/2/1

YOUTUBE.COM/ROCKFORDFOSGATE WATCH DETAILED VIDEOS ON OUR AMPLIFIER TECHNOLOGIES.

2015 BUYER’S GUIDE

T2500-1bdCP

WITH

WITHOUT

Output Power

4000

CONSTANT POWER

3500

U.S. Patent (7,994,857)

3000

2500

Frequency

240

220

200

180

160

140

120

100

2000

Music and speakers have a dynamic relationship. As the frequency of music varies, so does the impedance of the speaker. Rockford Fosgate’s Constant Power circuit design actively monitors and increases voltage and current as the speaker’s impedance rises with music. Resulting in up to a 25% increase in total amplifier power.

Products Featuring: CONSTANT POWER

DYNAMIC THERMAL MANAGEMENT THERMAL IMAGE WITHOUT

Our engineers at Rockford Fosgate have developed an award winning cooling design called Thermal Management). This patent pending design seamlessly manages the output and power supply temperatures, while evenly distributing the excess heat across the entire amplifier.

T H E R M A DTM L I M A G(Dynamic E WITH

Products Featuring: DTM

HERMAL IMAGE WITHOUT

THERMAL IMAGE WITH

NON MULTIPLYING ADVANCED DECISION Safe output protection is handled by our proprietary NOMAD circuit. NOMAD is an analog computer designed to calculate the maximum level of safe current allowable for each output device (based on their instantaneous voltage drop). This allows the protection to be much more precise than ever before; offering protection against: • Reverse Polarity • Short Circuit • Thermal • Low Impedance • Under/Over Voltage

Products Featuring: NOMAD

CEA-2006 Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier’s output power ratings are REAL POWER numbers, not inflated marketing ratings.

Products Compliant with CEA-2006

C.L.E.A.N. U.S. Patent (8,712,066 B1)

Time and sophisticated test equipment have been replaced with Rockford’s integrated level setting technology called CLEAN (Calibrated Level Eliminates Audible Noise). Using simple LED indicators to identify both signal clipping from the audio source and the output level clipping to the speakers, this precise level set-up eliminates speaker damaging distortion.

Products Featuring: CLEAN

AMPLIFIER PERFORMANCELINEUP TOPOLOGIESEXPLAINED -

Amplifier topology is the arrangement of parts in an amplifier design. These designs are broken out into ‘classes’. Each class has tradeoffs, making the various classes suited for various applications…like Class D or BD with higher RMS power, but undesirable noise in the higher frequencies making it better suited to power subwoofers.

CLASS BD

(Patent RE40550) - The Rockford Fosgate BD topology is more efficient than typical class AB and has lower distortion than class D designs. Rockford BD amplifiers are 75-80% efficient vs. 20-60% efficient class AB amplifiers. Delivering more power from your amplifier with less drain on your vehicles electrical and charging system.

CLASS AD - The Rockford Fosgate ad topology brings

our high efficiency BD amplifier design to a full range application. Using our Dynamic Frequency Switching to increase the switching frequency during lower output levels for better signal resolution. Coupled with Post Choke Feedback Filtering to compare the input signal to the output signal at the speaker connector removing any unwanted distortion. These technologies eliminate the inherent switching noise associated with typical class D designs.

CLASS D - High efficiency amplifier design that reduces current consumption from the charging system

CLASS TA -

The trans•ana topology operates the output stage with its full voltage gain, which allows the input stage to operate from a low voltage regulated supply. The signal is then shifted up in level to the high voltage section by the driver stage which forms an active node at ultrasonic frequencies. This results in a very stable, highly linear operation.

CLASS BR

(Patent 8,212,620) - To achieve higher efficiency with lower distortion, Rockford’s BR topology combines, Cycle-by-Cycle, an indirectly coupled high/ low voltage rail linear topology with a switched high/low voltage linear rail topology. This combination yields an unsurpassed power density (watts per cubic inch).

CLASS AB -

The combination of a class B power output with the class A low distortion attributes make class AB the most common amplifier topology in the electronics industry.

FULL RANGE CLASS D - High efficiency amplifier design that reduces current consumption from the charging system

EFFICIENCY

RMS

CLASS

1 CHANNEL

500-2500watts

500-1000watts

500-1200watts

85%

90%

WIDTH

2015 BUYER’S GUIDE

WIDTH

137 GRAMS WIDTH

HEIGHT

299 GRAMS

HEIGHT

326 GRAMS

HEIGHT

amplifier cross sections show the amount of heatsink material (Thermal Mass). A greater thermal mass means THERMAL MASS PER INCH - These increased play time and lower device distortion.

CLASS

70%

68% 2CH / 4CH

RMS

400-600watts

83%

85% 1CH / 2CH / 4CH

500watts

300-500watts

77%

73%

101 GRAMS WIDTH

DUAL-FAN COOLED

101 GRAMS

HEIGHT

EFFICIENCY

RMS

CLASS

EFFICIENCY

400-1000watts

WIDTH

BOOSTED RAIL

HEIGHT

RMS

150-300watts

CLASS

EFFICIENCY

300-1000watts

1CH / 2CH / 4CH

400-600watts

TH E G UT S OF AN AMPLIFIER

Organizing the combination of parts that make up the guts of an amplifier tremendously impacts its performance capabilities. A change in topology type matched with a variation of power supply components deliver a higher power output and enhanced audio quality. Rockford’s proprietary amplifier topologies and electrical technologies in our amplifier lineup will drive your system to new heights.

HEAT SINK MOSFETS

POWER SUPPLY

CIRCUIT BOARD

TERMINALS RCA

MATERIAL HIERARCHY

BESt

GOOD

2015 BUYER’S GUIDE

Heat Sink - This heavy outer shell protects the parts inside by transferring away the heat made reproducing an audio signal (music).

MOSFETs - A type of transistor used to amplify audio signal(music). You’ll see more of these guys lined up as wattage demands increase.

Circuit Board - Sometimes referred to as the PCB, is used to connect thisto-that through tiny lines of copper across multiple layers of pathways.

Power Supply - A.K.A the transformer, as the name suggests it takes the incoming voltage and converts it to a useable voltage for speakers.

Terminals - These are the connection points for the speakers or subwoofers and the power source(battery) for the amplifier.

RCA - These are the connection points for the audio signal(music) coming from the audio source (radio). RCA connectors are most commonly used.

500WATTS 1000WATTS 1500WATTS 2500WATTS

8.1”

400WATTS 600WATTS

400WATTS 600WATTS 800WATTS 1000WATTS

Die-Cast Aluminum w/DTM™ C-Clamp compression Balanced Differential

2.1”

TO-247 MOSFETs w/MEHSA™ 14.9” Ferrite Core Coated/Booted Transformer, with CONSTANT POWER™ • Superior sound quality achieved using audiophile grade components. • Proprietary Dynamic Thermal Management circuit manages heat production allowing you to play harder longer without overheating. • Select models utilize our Constant Power circuit giving you up to 25% more power where you want it when you want it.

4 layer 3 oz. Copper Circuit Board *T1500-1bdCP MODEL SHOWN

500WATTS

400WATTS

4.3”

Extruded Aluminum

7” 1.6”

Molex; Set-Screw or Pigtail Balanced Differential; High-Level Capable with Auto Turn -On TO-220 MOSFETs w/MEHSA™ Ferrite Core Coated/Booted Transformer, with CONSTANT POWER™

• Over 40% smaller than full size Power amps without sacrificing performance. • Maximizes cooling using our forced induction cooling fan system. • Simplified setup using our C.L.E.A.N. circuit technology.

4 layer 2 oz. Copper Circuit Board *T400X2ad MODEL SHOWN

300WATTS 400WATTS 500WATTS 1000WATTS

400WATTS 600WATTS

1000WATTS

7.8”

Die-Cast Aluminum w/ DTM™ C-Clamp compression Balanced Differential; High-Level Capable with Auto Turn-On

2.4”

TO-220 MOSFETs w/MEHSA™ Ferrite Core Coated/Booted Transformer 4 layer 2 oz. Copper Circuit Board *P1000X1bd MODEL SHOWN

300WATTS 500WATTS

300WATTS

13.3”

• Built on a legacy over 35 years in the making. • The C.L.E.A.N. setup circuit ensures maximum performance and undistorted output. • Signal inputs can accept either speaker level or RCA level input signals without needing a convertor.

300WATTS 4.3”

Extruded Aluminum Molex; Set-Screw or Pigtail Balanced Differential; High-Level Capable with Auto Turn -On

6.5”

1.5”

TO-220 MOSFETs w/MEHSA™ Storage Capacitor 4 layer 2 oz. Copper Circuit Board *PBR300X1 MODEL SHOWN

2015 BUYER’S GUIDE

• Small chassis, application specific amplifier design accepts speaker level or RCA level input signals. • Perfect for vehicles with low current capable electrical systems. • Three times the power of similar sized A/B models.

250WATTS 500WATTS 750WATTS 1200WATTS

6.8”

150WATTS

250WATTS 300WATTS

600WATTS

Die-Cast Aluminum Set-Screw Balanced Differential; High-Level Capable 2” TO-220 Bipolar Transistors 11.2”

Ferrite Core Transformer 2 layer 2 oz. Copper Circuit Board

• Custom engineered high mass heat sink design for maximum heat dissipation. • Top mount controls for ease of installation and setup.

*R250X4 MODEL SHOWN

400WATTS 600WATTS 6.8”

Die-Cast Aluminum Set-Screw Balanced Differential 2” TO-220 MOSFETs 11.1”

Ferrite Core Transformer 2 layer 2 oz. Copper Circuit Board

• Ultra-efficient 4-channel amplifier design using the latest full range Class D technology. • Amplifiers are optimized for 4-channel front/rear systems.

*R600-4D MODEL SHOWN

Input Sensitivity

S/N Ratio

Channel Separation

Dimensions

120x2 @ 4 ohms 200x2 @ 2 ohms 400x1 @ 4 ohms bridged

20Hz - 20kHz

<0.05%

150mV - 5V

>105dB

>50dB

H 2.14” x W 8.14” x L11.41” (Small chassis)

T600-2

200x2 @ 4 ohms 300x2 @ 2 ohms 600x1 @ 4 ohms bridged

20Hz - 20kHz

<0.05%

150mV - 5V

>105dB

>50dB

H 2.14” x W 8.14” x L13.66” (Medium chassis)

T400-4

60x4 @ 4 ohms 100x4 @ 2 ohms 200x2 @ 4 ohms bridged

20Hz - 20kHz

<0.05%

150mV - 5V

>105dB

>50dB

H 2.14” x W 8.14” x L13.66” (Medium chassis)

T600-4

100x4 @ 4 ohms 150x4 @ 2 ohms 300x2 @ 4 ohms bridged

20Hz - 20kHz

<0.05%

150mV - 5V

>105dB

>50dB

H 2.14” x W 8.14” x L14.91” (Large chassis)

150x4 @ 4 ohms 150x4 @ 2 ohms 200x4 @ 1 ohm 300x2 @ 4 ohms bridged 400x2 @ 2 ohms bridged

20Hz - 20kHz

<1.0%

150mV - 5V

>95dB

>50dB

T800-4ad

H 2.14” x W 8.14” x L13.66” (Medium chassis)

Class ad w/ Constant Power

250x4 @ 4 ohms 250x4 @ 2 ohms 250x4 @ 1 ohm 500x2 @ 4 ohms bridged 500x2 @ 2 ohms bridged

20Hz - 20kHz

<1.0%

150mV - 5V

>95dB

>50dB

T1000-4ad

H 2.14” x W 8.14” x L14.91” (Large chassis)

Class ad w/ Constant Power and 4/2/1

T500-1bdCP

300x1 @ 4 ohms 500x1 @ 2 ohms 500x1 @ 1 ohm

20Hz - 250Hz

<0.5%

150mV - 5V

>100dB

N/A

H 2.14” x W 8.14” x L11.41” (Small chassis)

Class bd w/ Constant Power

4 layer 3 oz. copper circuit board

T1000-1bdCP

700x1 @ 4 ohms 1000x1 @ 2 ohms 1000x1 @ 1 ohm

20Hz - 250Hz

<0.8%

150mV - 5V

>100dB

N/A

H 2.14” x W 8.14” x L13.66” (Medium chassis)

T1500-1bdCP

1000x1 @ 4 ohms 1500x1 @ 2 ohms 1500x1 @ 1 ohm

20Hz - 250Hz

<0.8%

150mV - 5V

>100dB

N/A

H 2.14” x W 8.14” x L14.91” (Large chassis)

1500x1 @ 4 ohms 2500x1 @ 2 ohms 2500x1 @ 1 ohm

20Hz - 250Hz

<0.8%

150mV - 5V

>100dB

N/A

H 2.14” x W 8.14” x L21.9” (X-Large chassis)

T400X2ad

200x2 @ 4 ohms 200x2 @ 2 ohms 400x1 @ 4 ohms bridged

20Hz - 20kHz

<1.0%

150mV - 12V

>110dB

>60dB

H 1.6” x W 4.3” x L7” (Compact chassis)

Class ad w/ Constant Power

4 layer 2 oz. copper circuit board

T400X4ad

100x4 @ 4 ohms 100x4 @ 2 ohms 200x2 @ 4 ohms bridged

20Hz - 20kHz

<1.0%

150mV - 12V

>110dB

>60dB

H 1.6” x W 4.3” x L8.3” (Compact chassis)

T500X1br

175x1 @ 4 ohms 300x1 @ 2 ohms 500x1 @ 1 ohm

20Hz - 220Hz

<1.0%

150mV - 12V

>110dB

N/A

H 1.6” x W 4.3” x L8.3” (Compact chassis)

Class br

P300X2

100x2 @ 4 ohms 150x2 @ 2 ohms 300x1 @ 4 ohms bridged

20Hz - 20kHz

<1.0%

150mV - 12V

>105dB

>50dB

H 2.4” x W 7.8” x L 9.9” (Mini chassis)

TRANS•ana

4 layer 2 oz. copper circuit board

P400X2

125x2 @ 4 ohms 200x2 @ 2 ohms 400x1 @ 4 ohms bridged

20Hz - 20kHz

<1.0%

150mV - 12V

>105dB

>50dB

H 2.4” x W 7.8” x L 11.0” (Small chassis)

P500X2

150x2 @ 4 ohms 250x2 @ 2 ohms 500x1 @ 4 ohms bridged

20Hz - 20kHz

<1.0%

150mV - 12V

>105dB

>50dB

H 2.4” x W 7.8” x L 13.3” (Medium chassis)

P1000X2

300x2 @ 4 ohms 500x2 @ 2 ohms 1000x1 @ 4 ohms bridged

20Hz - 20kHz

<1.0%

150mV - 12V

>105dB

>50dB

H 2.4” x W 7.8” x L 15.0” (Large chassis)

P400X4

50x4 @ 4 ohms 100x4 @ 2 ohms 200x2 @ 4 ohms bridged

20Hz - 20kHz

<1.0%

150mV - 12V

>105dB

>50dB

H 2.4” x W 7.8” x L 11.0” (Small chassis)

75x4 @ 4 ohms 150x4 @ 2 ohms 300x2 @ 4 ohms bridged

20Hz - 20kHz

<1.0%

150mV - 12V

>105dB

>50dB

H 2.4” x W 7.8” x L 13.3” (Medium chassis)

75x4 + 200x1 @ 4 ohms 125x4 + 400x1 @ 2 ohms N/A + 500x1 @ 1 ohm

20Hz - 20kHz

<1.0%

150mV - 12V

>105dB

>50dB

H 2.4” x W 7.8” x L 15.0” (Large chassis)

TRANS•ana & Class bd

4 layer 2 oz. copper circuit board

P300X1

200x1 @ 4 ohms 300x1 @ 2 ohms

20Hz - 20kHz

<1.0%

150mV - 12V

>105dB

N/A

H 2.4” x W 7.8” x L 9.9” (Mini chassis)

TRANS•ana

4 layer 2 oz. copper circuit board

P400X1

200x1 @ 4 ohms 400x1 @ 2 ohms

20Hz - 20kHz

<1.0%

150mV - 12V

>105dB

N/A

H 2.4” x W 7.8” x L 9.9” (Mini chassis)

P500X1bd

150x1 @ 4 ohms 300x1 @ 2 ohms 500x1 @ 1 ohm

20Hz - 250Hz

<1.0%

150mV - 12V

>100dB

N/A

H 2.4” x W 7.8” x L 11.0” (Small chassis)

P1000X1bd

300 @ 4 ohms 600x1 @ 2 ohms 1000x1 @ 1 ohm

20Hz - 250Hz

<1.0%

150mV - 12V

>100dB

N/A

H 2.4” x W 7.8” x L 13.3” (Medium chassis)

T2500-1bdCP

P600X4

P1000X5

2015 BUYER’S GUIDE

Circuit Board

THD+N @ Rated Power

T400-2

Topology

Frequency Response

Rated Power

[ AMPLIFIER SPECIFICATIONS [

TRANS•ana

Class bd

4 layer 3 oz. copper circuit board

Speaker Terminals

Additional Features

Focused mass die-cast heatsink / DTM™- Dynamic Thermal Management / MEHSA™- Maximum Efficiency HeatSink Application

Power Terminals

Protection NOMAD circuit • Reverse Polarity • Short Circuit • Thermal • Low Impedance • Under/Over Voltage

RCA Inputs

Impedance Stability 1 ohm stereo / 2 ohm mono stable

Heatsink Design

Variable Crossover 24 dB/oct - variable High or Low Pass and All Pass

4 Ga. c-clamp compression connector

8 Ga. c-clamp compression connector

Punch EQ variable from 0dB to +18dB @ 45Hz and/or 0dB to +12dB @ 12KHz with optional PEQ

Balanced differential RCA inputs and RCA pass thru

4 Ga. c-clamp compression connector

8 Ga. c-clamp compression connector

Punch EQ variable from 0dB to +18dB @ 45Hz with optional Punch Equalization

Balanced differential panel mount RCA and RCA pass thru

stealth proprietary 1/0 Ga. 4mm allen head set-screw cast zinc connector

stealth proprietary 8 Ga. 4mm allen head set-screw cast zinc connector

Punch EQ variable from 0dB to +18dB @ 45Hz with optional Punch Equalization and BDSync or Master/ Slave

High level capable with auto turn-on balanced differential RCA inputs

8 Ga. Quick Connect terminal

16 Ga. 4-pin Molex connector

Punch EQ variable from 0dB to +18dB @ 45Hz and/or 0dB to +14dB @ 12.5KHz with optional Punch Level Control(PLC2)

10 Ga. nickel plated Quick Connect

Punch EQ variable from 0dB to +18dB @ 45Hz with optional Punch Level Control(PLC2)

4 Ga. c-clamp compression connector

8 Ga. c-clamp compression connector

Punch EQ variable from 0dB to +18dB @ 45Hz and/or 0dB to +14dB @ 12.5KHz with optional Punch Level Control(PLC2)

Balanced differential RCA inputs and RCA pass thru

Differential RCA inputs

Differential RCA inputs and RCA pass thru Focused mass die-cast heatsink / 4-Point Thermal Monitoring / MEHSA™- Maximum Efficiency HeatSink Application

Differential RCA inputs

Differential RCA inputs and RCA pass thru

24 dB/oct - variable Low Pass

1 ohm mono rated

12 dB/oct - variable High or Low Pass and All Pass

2 ohm stereo / 4 ohm mono rated

12 dB/oct - variable Low Pass

1 ohm mono rated

12 dB/oct - variable High or Low Pass and All Pass

2 ohm stereo / 4 ohm mono rated

NOMAD circuit • Reverse Polarity • Short Circuit • Thermal • Low Impedance • Under/Over Voltage

Focused mass die-cast heatsink / DTM™- Dynamic Thermal Management / MEHSA™- Maximum Efficiency HeatSink Application

Dual fan forced induction cooling

Focused mass die-cast heatsink / DTM™- Dynamic Thermal Management / MEHSA™- Maximum Efficiency HeatSink Application

High level capable with auto turn-on balanced differential RCA inputs and RCA pass thru

High level capable with auto turn-on balanced differential RCA inputs High level capable with auto turn-on balanced differential RCA inputs and RCA pass thru 12 dB/oct - variable High or Low Pass and All Pass 12 dB/oct - fixed infrasonic

2 ohm stereo / 1 ohm mono rated

NOMAD circuit • Reverse Polarity • Short Circuit • Thermal • Low Impedance • Under/Over Voltage

Focused mass die-cast heatsink / DTM™- Dynamic Thermal Management / MEHSA™- Maximum Efficiency HeatSink Application

High level capable with auto turn-on balanced differential RCA inputs

4 Ga. c-clamp compression connector

8 Ga. c-clamp compression connector

Punch EQ variable from 0dB to +18dB @ 45Hz and/or 0dB to +14dB @ 12.5KHz with optional Punch Level Control(PLC2)

12 dB/oct - variable High or Low Pass and All Pass

2 ohm mono rated

Focused mass die-cast heatsink / DTM™- Dynamic Thermal Management / MEHSA™- Maximum Efficiency HeatSink Application

High level capable with auto turn-on balanced differential RCA inputs and RCA pass thru

4 Ga. c-clamp compression connector

8 Ga. c-clamp compression connector

Punch EQ variable from 0dB to +18dB @ 45Hz and/or 0dB to +14dB @ 12.5KHz with optional Punch Level Control(PLC2)

12 dB/oct - variable Low Pass

1 ohm mono rated

NOMAD circuit • Reverse Polarity • Short Circuit • Thermal • Low Impedance • Under/Over Voltage

THD+N @ Rated Power

Input Sensitivity

S/N Ratio

Channel Separation

Dimensions

Topology

100x2 @ 4 ohms 150x2 @ 2 ohms 300x1 @ 4 ohms bridged

20Hz - 20kHz

<0.5%

150mV - 11V

>100dB

>50dB

H 1.5” x W 4.25” x L 6.75”

Class br

75x4 @ 4 ohms

20Hz - 20kHz

<0.5%

150mV - 11V

>100dB

>50dB

H 1.5” x W 4.25” x L 6.75”

75x1 @ 4 ohms 150x1 @ 2 ohms 300x1 @ 1 ohm

20Hz - 250Hz

<0.2%

150mV - 11V

>105dB

N/A

H 1.5” x W 4.25” x L 6.75”

175x1 @ 4 ohms 300x1 @ 2 ohms 500x1 @ 1 ohm

20Hz - 20kHz

<0.1%

150mV - 11V

>105dB

N/A

H 1.5” x W 4.25” x L 8.25”

R150X2

50x2 @ 4 ohms 75x2 @ 2 ohms 150x1 @ 4 ohms bridged

20Hz - 20kHz

<1.0%

150mV - 12V

>100dB

>50dB

H 2.0” x W 6.8” x L 11.2”

R250X4

40x4 @ 4 ohms 60x4 @ 2 ohms 125x2 @ 4 ohms bridged

20Hz - 20kHz

<1.0%

150mV - 12V

>100dB

>50dB

H 2.0” x W 6.8” x L 11.2”

R300X4

50x4 @ 4 ohms 75x4 @ 2 ohms 150x2 @ 4 ohms bridged

20Hz - 20kHz

<1.0%

150mV - 12V

>100dB

>50dB

H 2.0” x W 6.8” x L 13.2”

R400-4D

75x4 @ 4 ohms 100x4 @ 2 ohms 200x2 @ 4 ohms bridged

20Hz - 20kHz

<1.0%

150mV - 5V

>90dB

>50dB

H 2.0” x W 6.8” x L 9.1”

R600-4D

100x4 @ 4 ohms 150x4 @ 2 ohms 300x2 @ 4 ohms bridged

20Hz - 20kHz

<1.0%

150mV - 5V

>90dB

>50dB

H 2.0” x W 6.8” x L 11.1”

50x4 + 200x1 @ 4 ohms 75x4 + 300x1 @ 2 ohms 150x2 + N/A @ 4 ohms bridged

20Hz - 20kHz

<1.0%

150mV - 12V

>100dB

>50dB

R600X5

R250X1

150x1 @ 4 ohms 250x1 @ 2 ohms

20Hz - 250Hz

<1.0%

150mV - 12V

>100dB

R500X1D

300x1 @ 4 ohms 500x1 @ 2 ohms

20Hz - 250Hz

<1.0%

150mV - 12V

R750-1D

250x1 @ 4 ohms 500x1 @ 2 ohms 750x1 @ 1 ohm

20Hz - 250Hz

<1.0%

R1200-1D

400x1 @ 4 ohms 800x1 @ 2 ohms 1200x1 @ 1 ohm

20Hz - 250Hz

<1.0%

PBR300X2

PBR300X4 PBR300X1

PBR500X1

2015 BUYER’S GUIDE

Circuit Board

Frequency Response

Rated Power

[ AMPLIFIER SPECIFICATIONS [ 6 layer 2 oz. copper circuit board

4 layer 2 oz. copper circuit board

Class ab

Single layer 2 oz. copper circuit board

Full Range Class d

4 layer 2 oz. copper circuit board

H 2.0” x W 6.8” x L 13.2”

Class ab & Class d

Single layer 2 oz. copper circuit board

N/A

H 2.0” x W 6.8” x L 11.2”

Class ab

Single layer 2 oz. copper circuit board

>100dB

N/A

H 2.0” x W 6.8” x L 8.5”

Class d

150mV - 4V

>100dB

N/A

H 2.0” x W 6.8” x L 9.1”

150mV - 4V

>100dB

N/A

H 2.0” x W 6.8” x L 11.1”

4 layer 2 oz. copper circuit board

12 dB/oct - variable Low Pass

12 dB/oct - variable High or Low Pass and All Pass

Power Terminals

Speaker Terminals

Additional Features

Protection • Reverse Polarity • Short Circuit • Thermal • Low Impedance • Under/Over Voltage

RCA Inputs

Impedance Stability 2 ohm stereo / 4 ohm mono rated

Heatsink Design

Variable Crossover 12 dB/oct - 80Hz fixed High or Low Pass and All Pass

Inter-locking extruded aluminum heatsinks w/ pierced metal recessed badge

RCA/Speaker level pigtailed Molex connector with auto turn-on

10 Ga. Molex connector

16 Ga. pigtailed Molex connector

Optional PEQ variable from 0dB to +18dB @ 45Hz and/or 0dB to +12dB @ 12KHz, variable high-level adjust and 6V DC offset w/ remote out

4 ohm stereo ONLY

Variable high-level adjust and 6V DC offset w/ remote out

1 ohm mono rated

Optional PEQ Variable from 0dB to +18dB @ 45Hz, variable highlevel adjust and 6V DC offset w/ remote out

2 ohm stereo / 4 ohm mono rated

• Short Circuit • Thermal

Focused mass die-cast heatsink

RCA or speaker level pigtailed Molex connector input and RCA pass thru

8 Ga. Molex connector

12 Ga. pigtailed Molex connector

4 Ga. set-screw connector

10 Ga. set-screw connector

Punch EQ variable from 0dB to +12dB @ 45Hz

RCA input or speaker level pigtailed Molex connector input

Punch EQ selectable from 0dB/+6dB/+12dB @ 45Hz

RCA input and RCA pass thru

Punch EQ variable from 0dB to +18dB @ 45Hz

12 dB/oct - variable High or Low Pass and All Pass

2 ohm stereo / 4 ohm mono rated(Front/Rear) and 2 ohm mono rated(Sub)

• Short Circuit • Thermal

Focused mass die-cast heatsink

RCA input or speaker level pigtailed Molex connector input

4 Ga. set-screw connector

10 Ga. set-screw connector

Punch EQ selectable from 0dB/+6dB/+12dB @ 45Hz(Front/ Rear) and Variable from 0dB to +12dB @ 45Hz(Sub)

12 dB/oct - variable Low Pass

2 ohm mono rated

• Short Circuit • Thermal

Focused mass die-cast heatsink

RCA or speaker level pigtailed Molex connector input and RCA pass thru

4 Ga. set-screw connector

10 Ga. set-screw connector

Punch EQ variable from 0dB to +12dB @ 45Hz and included Punch Level Control(PLC)

12 dB/oct - variable Low Pass 12 dB/oct - variable infrasonic

1 ohm mono rated

RCA input and RCA pass thru

ROCKFORDFOSGATE.COM Don’t forget to use our Woofer Wiring Wizard to properly wire woofers to your amplifier or our Amp Wire Calculator to optimize output with properly sized wire.

Punch EQ variable from 0dB to +18dB @ 45Hz and included Punch Level Control(PLC)

SUBWOOFERS

UNPRECEDENTED POWER AND CONTROL

YEAR

WATTS

3000 ” 1 5 68

UP TO RMS POWER HANDLING

LIMITED WARRANTY

VOICE COIL

XMAX PEAK TO PEAK

M M

HISTORY OF PERFORMANCE

WATTS

600 YEAR

LIMITED WARRANTY

UP TO RMS POWER HANDLING

2.5

”

M M

VOICE COIL

XMAX PEAK TO PEAK

THE PERFECT FIRST STEP

YEAR

WATTS

250 ” 1 2 20 LIMITED WARRANTY

M M

UP TO RMS POWER HANDLING

VOICE COIL

XMAX PEAK TO PEAK

2015 BUYER’S GUIDE

DESIGNED WITH THE LATEST WOOFER TECHNOLOGY The power series truly surpasses the competition as your premier woofer choice. Power series subwoofers have always been known for class leading performance, power handling and output capabilities. This year our speaker engineers went back to the drawing board trying to not only improve on the current design but create something entirely new. They far surpassed expectations by not only recreating the T2 series of woofer from the ground up, but also introducing our newest additions to the family; the T3 19” and T1 Slim series of woofers. Whether you loved the old T2 and want to finally step-up to the next level or you feel like you’re grown-up enough to handle our new T3 super woofer monstrosity, we now offer woofers to make the competition and your friends cringe in fear. If you’re tight on space and don’t want to be left out, our new T1 Slim woofer has all the performance and output of our full size T1 with an astounding 3 inch mounting depth. If you’re someone who needs to be the loudest and baddest on the block, then you need the Power series woofers in your ride.

MODELS SHOWN | T3S2-19, T2S1-16, T1D212, T0D212, T1S2-12

OPTIONAL

ENCLOSURE and / or GRILLE

Optional integrated grille available for ALL PUNCH subwoofers. Loaded enclosures available for all 10” or 12” PUNCH subwoofers and 8”, 10” or 12” PUNCH SHALLOW subwoofers.

MODELS SHOWN | P3D2-12, P2D2-12, P1S2-12, P3SD2-12

2015 BUYER’S GUIDE

A PERFECT BALANCE BETWEEN “QUALITY” & “QUANTITY” BASS Punch series woofers are ideal for the customer looking for the best of both worlds. While built on a long standing history of performance, the punch series woofers can deliver not only output to satisfy you when you want it loud but maintain a level of sound quality for when you really want to “listen” to your music. With three series within the family, covering both standard and shallow depth models alike, we have woofers to suit just about anyone’s taste in bass. Taking many design cues from the Power family of products, our speaker engineers continue to improve the series year after year making the Punch family one of the most sought after woofer lines for music and bass enthusiasts alike. With features like our Kevlar reinforced cone assemblies for high strength and anodized aluminum voice coil formers to handle heat buildup in the motor structure under full power situations, these woofers are designed to perform.

OPTIONAL ENCLOSURE Loaded enclosures available for all 10” or 12” PRIME R1 and R2 Shallow subwoofers. Optional integrated grille available for R1 subwoofers.

MODELS SHOWN | R2D2-12, R2SD2-12, R1S4-12

2015 BUYER’S GUIDE

THE PERFECT FIRST STEP INTO PERFORMANCE AUDIO Are you looking to simply add some bass to your existing audio system? Or better yet, are you wanting to design your first full audio system from the ground up? Are you looking for a woofer that is built with quality and performance in mind and has been designed by the industry’s leading car audio manufacturer? Then our Prime series of woofers are exactly what you are looking for. Offering both standard depth and shallow mount models, we’ve created a family of woofers that deserves to carry the name Rockford Fosgate. These woofers, like their Punch brethren, are built using many of the same speaker technologies that Rockford has been famous for over 30 years for and you won’t break the bank buying one. Simply put, our Prime series of woofers are held to the same standards of quality and performance as any other Rockford woofer but delivered at an affordable price.

When you make a product purchase that bears the Rockford Fosgate name, you are receiving the technology, engineering, and innovation that has taken over three decades to hone. Our constant desire to push the performance envelope has lead us to develop proprietary amplifier topologies and acoustic/electrical technologies that put a spin on the normal and make it Rockford.

VERTICAL ATTACH SURROUND TECHNIQUE Rockford’s proprietary surround technique, VAST, provides up to a 25% increase in the speaker’s effective radiating cone area without complicated installation issues. This design alters the typical design and manufacturing technique by eliminating the large flat glue surface area (the landing) which allows the surround to be shifted for increased cone area. In turn, both nominal efficiency and maximum output capabilities are dramatically improved. Products Featuring: VAST SLIM

SHALLOW

EVCC Our Patent Pending EVCC (Encapsulated Voice Coil Coupling) technology connects to the woofers voice coil from both the top and bottom and provides a more secure mounting platform for both the dual spiders and cone assembly. Products Featuring: EVCC SLIM

SHALLOW

SYMS The Patent Pending unique motor structure design allows full excursion capabilities of the woofers voice coil while allowing an overall reduction in woofer mounting depth. Products Featuring: SYMS SLIM

SHALLOW

CEA-2031 Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards. This means your speaker has the capacity to handle power under continuous demand, not instantaneous power handling that over time can damage voice coils. Products Compliant with CEA-2031 SLIM

YOUTUBE.COM/ROCKFORDFOSGATE WATCH DETAILED VIDEOS ON OUR SUBWOOFER TECHNOLOGIES.

2015 BUYER’S GUIDE

SHALLOW

FLEX FIT The slot mounted frame pattern of the Flex Fit basket utilizes slots (where feasible) instead of single screw sized holes. This allows for a slight adjustment of the speaker when mounted. Products Featuring: FLEX FIT SLIM

SHALLOW

FELX FIT 2 FLEX FIT 2 AND CAR MOUNTING SPEAKER LOCATION

The slot mounted frame pattern allows for variable adjustments to the mounting position, especially for Euro-Fit installations. Products Featuring: FLEX FIT 2 SLIM

SHALLOW

INDUCTIVE DAMPING HEAT SINK Secures directly to the top of magnet structure to improve system efficiency by reducing both distortion and back EMF (Electo-magnetic force). Also radiates heat to reduce voice coil temperature. Products Featuring: IDHS SLIM

SHALLOW

SELECTABLE WOOFER IMPEDANCE FUSED TERMINATION Removing and inverting the center plug allows nominal impedance of voice coils to quickly be configured in a Series or Parallel wiring configuration. This removable impedance selection jumper also provides fused protection in severe overload conditions. Products Featuring: SWIFT SLIM

SHALLOW

VERIFIED WITH KLIPPEL To adorn the ‘Verified with Klippel’ mark, the qualifying company’s loudspeaker engineering personnel must be trained and certified by Klippel prior to using the three separate Klippel systems to design, develop and test. • • •

Klippel DA-2 (Designed) Klippel PM-8 (Developed) Klippel QC (Tested)

Products Verified with KLIPPEL SLIM

SHALLOW

SUBWOOFER PERFORMANCE LINEUP SPL

SPL - Sound Pressure Level numbers reflect an in-car response utilizing dual subwoofers in a typical sedan size cabin at peak power.

XMAX

XMAX - The measured excursion of the subwoofer in one direction, with Peak-to-Peak covering its entire travel. The more air a woofer moves, the higher the SPL.

OUTWARD EXCURSION

PEAK POWER

2015 BUYERâ&#x20AC;&#x2122;S GUIDE

REST

INWARD EXCURSION

PEAK POWER - The maximum amount of amplifier power that can be applied to a subwoofer.

a n ato m y OF A SUBWOOFER

Variations in the anatomy of a subwoofer dramatically changes its performance characteristics. An increase in voicecoil size coupled with a stronger cone material yields a higher power handling and increased output. By combining quality materials with Rockfordâ&#x20AC;&#x2122;s proprietary acoustic technologies, our subwoofer lineup is sure to meet your systemâ&#x20AC;&#x2122;s demands.

SURROUND BASKET

CONE

SPIDER VOICE COIL MAGNET

Surround - First part in the speakers suspension, attached to the cone to maintain the centering of the voice coil in the magnetic gap.

Spider - Second part of the speakers suspension, connects the cone and voice coil to the basket and controls the travel of the cone assembly.

Cone - A.K.A the diaphragm, this is the voice of the speaker. Shape and material dramatically change tonality.

Voice Coil - The brains of the operation, directing the force from the magnet to push or pull based on the applied electrical signal.

Magnet - The heart of speaker, creating the force to push and pull cone assembly. Size, material, and design may differ, depending on performance goals.

BESt

GOOD

MATERIAL HIErARCHY

Basket - Also referred to as the frame or chassis, this is the skeletal system of the speaker. Here to keep everything in its place.

3000

WATTS

SINGLE 1Ω SINGLE 2Ω

RMS POWER RANGE

Injection Molded Foam Surround with VAST™ Specially designed to maximize control and overcome common problems stamp-formed foam surrounds encounter.

Three-Layer Glass Fiber/ Aramid Honeycomb/ Glass Fiber Cone Extremely rigid yet lightweight cone design eliminates flex under high power applications.

Dual Nomex Progressive Spiders with Integrated Lead Wires True NomexTM spiders maximize excursion capabilities while maintaining full linear cone control.

Stacked Single Layer Edge Wound Aluminum 5” Voice Coil

Dual Gap Multi‐Pole Neodymium Push/Pull Motor Structure

Single layer edge wound design allows for maximum heat dissipation versus multilayer single voice coils.

Innovative dual-gap design drives the voice coil in a custom push/pull configuration for maximum power handling. Massive Neodymium slug provides necessary magnetic force to move the voice coil/ cone assembly to full excursion.

Injection Molded Foam w/ VAST™

5” Single Layer Edge Wound Aluminum

3 Layer Glass Fiber/ Aramid/ Glass Fiber w/ Aluminum Dust Cap

Die-Cast Aluminum w/ Integrated Trim Ring

Dual NomexTM Progressive w/ Integrated Leadwires

Dual Gap Multi-Pole Neodymium Push/ Pull

*T3S1-19 MODEL SHOWN

2015 BUYER’S GUIDE

2000-2500

WATTS

SINGLE 1Ω SINGLE 2Ω

RMS POWER RANGE

Injection Molded Foam Surround with VAST™ Specially designed to maximize control and overcome common problems stamp-formed foam surrounds encounter.

Three-Layer Glass Fiber/ Aramid Honeycomb/ Glass Fiber Cone Extremely rigid yet lightweight cone design eliminates flex under high power applications. Dual Nomex Progressive Spiders with Integrated Lead Wires True NomexTM spiders maximize excursion capabilities while maintaining full linear cone control.

Triple Stack Segmented Ferrite Motor Structure Massive motor structure provides necessary magnetic force to maximize output at power handling capabilities.

Injection Molded Foam w/ VAST™

4” Single Layer Edge Wound Aluminum

3 Layer Glass Fiber/ Aramid/ Glass Fiber w/ Aluminum Dust Cap

Die-Cast Aluminum w/ FlexFit2TM

Dual NomexTM Progressive w/ Integrated Leadwires

Triple Stack Ferrite Magnet w/ IDHSTM

*T2S1-16 MODEL SHOWN

500-600

WATTS

SINGLE 1Ω SINGLE 2Ω

RMS POWER RANGE

SLIM

Three-Layer Carbon Fiber/ Rohacell/ Glass Fiber Cone

Injection Molded Foam Surround with VAST™

Extremely rigid yet lightweight cone design eliminates flex under high power applications.

Specially designed to maximize control and overcome common problems stamp-formed foam surrounds encounter.

Dual Nomex™ Progressive Spiders with Integrated Lead Wires True NomexTM spiders maximize excursion capabilities while maintaining full linear cone control. Innovative suspension design eliminates any mechanical bottoming of the voice coil assembly.

High quality, high energy neodymium magnet structure provides motor force equivalent to a full size T1 woofer.

Injection Molded Foam w/ VAST™

3” Dual Wound W/ Interior & Exterior Windings

3 Layer Carbon Fiber/ Rohacell/ Glass Fiber w/ Aluminum Dust Cap

Die-Cast Aluminum w/ FlexFit2TM

Dual NomexTM Progressive w/ Integrated Leadwires

High Energy Neodymium

*T1S1-12 MODEL SHOWN

High Temp High Energy Neodymium Motor Structure

2015 BUYER’S GUIDE

DUAL 2Ω DUAL 4Ω

Kevlar fiber cone / Hard Anodized Aluminum Dust Cap Eliminates cone distortion.

600-1000

RMS POWER RANGE

WATTS

Reduces piston flex.

Double Stacked Magnet with IDHSTM

*T1D412 MODEL SHOWN

IDHSTM increases thermal capacity and heat dissipation. This increases power handling and performance.

DUAL 2Ω DUAL 4Ω

Tall profile SantopreneTM w/ VASTTM surround Allows for linear travel. High excursion.

WATTS

550-800

RMS POWER RANGE

Tall Profile, Santoprene™ w/ VAST™ Kevlar Fiber Paper/ Hard Anodized Aluminum Dual Mirror Imaged w/ Stitched Lead Wire and Cooling Vents 3” 4-Layer High Temp.Aluminum w/ NomexTM collar Die-Cast Aluminum w/ FlexFitTM Double Stack Ferrite Magnet Die-cast aluminum frame with FlexFitTM For reduced voice coil former temperature and increase power handling. FlexFit for better mounting.

*T0D412 MODEL SHOWN

Hard Anodized Aluminum Cone & Dust Cap

DUAL 2Ω DUAL 4Ω

Premium sound quality. Reduces piston flex. Eliminates cone distortion.

WATTS

500-600

RMS POWER RANGE

Tall Profile, Santoprene™ w/ VAST™ Hard Anodized Aluminum Dual Mirror Imaged w/ Stitched Lead Wire and Cooling Vents 2.50” 4-Layer High Temp. Aluminum w/ NomexTM collar StampCastTM w/ FlexFitTM Double Stack Ferrite Magnet

Spider Cooling Vents Proprietary vents work in conjunction with the vented pole piece and vented back plate for maximum cooling & increased power handling.

*P3D4-12 MODEL SHOWN

DUAL 2Ω DUAL 4Ω

Tall profile SantopreneTM w/ VASTTM surround Increased cone area. Allows for linear travel.

WATTS

250-400

RMS POWER RANGE

Tall Profile, Santoprene™ w/ VAST™ Kevlar Fiber Paper Dual Mirror Imaged w/ Stitched Lead Wire and Cooling Vents 2.25” 4-Layer High Temp. Aluminum w/ NomexTM collar StampCastTM w/ FlexFitTM Double Stack Ferrite Magnet *P2D4-12 MODEL SHOWN

2015 BUYER’S GUIDE

High excursion.

Kevlar Reinforced semipressed Paper Cone Lightweight for efficiency. Very rigid to eliminate cone distortion.

SINGLE 2Ω SINGLE 4Ω

Half Roll, Nitrile Butadiene surround Allows for linear travel.

WATTS

200-250

RMS POWER RANGE

Half-Roll, Nitrile Butadiene Rubber Kevlar Fiber Paper Single w/ Stitched Lead Wire and Cooling Vents 2” 4-Layer High Temp. Aluminum w/ NomexTM collar StampCastTM w/ FlexFitTM

StampCastTM frame with Flex FitTM Rigid basket.

Single Stack Ferrite Magnet

Flex Fit for better mounting.

*P1S4-12 MODEL SHOWN

DUAL 2Ω DUAL 4Ω

Increased cone area. Lower profile.

Hard Anodized Aluminum Cone & Dust Cap

SHALLOW

Premium sound quality. Reduces piston flex. Eliminates cone distortion.

150-400

WATTS

M-Roll Santoprene surround w/ VASTTM

RMS POWER RANGE

M-Roll, Santoprene™ w/ VAST™ Hard Anodized Aluminum Dual Laminated w/ Embedded Lead Wire and Cooling Vents 2.50” 4-Layer High Temp. Aluminum w/ NomexTM collar StampCastTM w/ FlexFitTM Single Ferrite Magnet *P3SD4-12 MODEL SHOWN

DUAL 2Ω DUAL 4Ω

Assists in linear cone travel.

WATTS

250

Half-Roll, Sealed Polyether – Ester Foam Surround

RMS POWER RANGE

Improved excursion capabilities.

Polypropylene Cone Rigid cone reduces piston flex. Reduces cone distortion.

Half-Roll, Sealed Polyether-ester Foam Polypropylene Single w/ Stitched Lead Wire and Cooling Vents 2” 4-Layer High Temp. Aluminum w/ NomexTM collar Stamped Steel Single Ferrite Magnet *R2D4-12 MODEL SHOWN

200

WATTS

SINGLE 4Ω

RMS POWER RANGE

2015 BUYER’S GUIDE

High durability compressed foam surround

Fiber Reinforced Painted Paper-Pulp Cone w/ Aluminum Dustcap

Tear & fatigue resistant.

Rigid & lightweight.

Designed for long life use.

Improves thermal performance for higher power handling.

DUAL 2Ω DUAL 4Ω

Rigid cone design. Reduces cone distortion.

SHALLOW

200-250

WATTS

Monolithic Injection Molded Polypropylene Cone

RMS POWER RANGE

Half-Roll, Sealed Polyether-ester Foam Injection Molded Polypropylene Single w/ Stitched Lead Wire and Cooling Vents 2” 4-Layer High Temp. Aluminum w/ NomexTM collar Stamped Steel Frame

Stamped Steel

Design reduces frame flex. Improves performance.

Single Ferrite Magnet *R2SD4-12 MODEL SHOWN

Nominal Impedance

Xmax (mm)

Sensitivity

RMS Power Handling (watts)

Peak Power Handling (watts)

Mounting Diameter

Mounting Depth

Speaker

Sealed Enclosure (cu. ft.)

Ported Enclosure

T3S1-19/ T3S2-19

19"

Single 1Ω or 2Ω

90 dB

3000

6000

17.54"

15.62

0.34

N/A

8 cu. ft. Port: (1) 23"h x 3"w x 30"d

T2S1-13/ T2S2-13

13"

Single 1Ω or 2Ω

87 dB

2000

4000

12.28"

9.7"

0.34

1.85

4.0 cu. ft. Port: (1) 14"h x 3"w x 20.5"d

T2S1-16/ T2S2-16

16"

Single 1Ω or 2Ω

90 dB

2500

5000

15.04"

10.47"

0.49

2.4

5.5 cu. ft. Port: (1) 18"h x 3"w x 23"d

T1D210/T1D410

10”

Dual 2 Ω or 4 Ω

16.4

83 dB

600

1200

9.13"

6.5"

0.203

0.75

1.50 cu ft. Port: (1) 4”x11”

T1D212/T1D412

12”

Dual 2 Ω or 4 Ω

16.4

86 dB

800

1600

11.25"

6.9"

0.308

1.25

1.75 cu ft. Port: (1) 4”x9”

(cu. ft.)

Speaker Size

Displacement

[ SUBWOOFER SPECIFICATIONS [

T1D215/T1D415

15”

Dual 2 Ω or 4 Ω

16.4

88 dB

1000

2000

13.94"

8.4"

0.547

2.25

2.66 cu ft. Port: (1) 4”x10”

T1S1-10T1S2-10 SLIM

10”

Single 1 Ω or 2 Ω

85 dB

600

1200

11.22"

3.0"

0.05

0.8

1.5 cu. ft. Port: (1) 4"x13

T1S1-12/T1S2-12 SLIM

12”

Single 1 Ω or 2 Ω

83 dB

500

1000

9.13"

3.0"

0.03

1.5

2 cu. ft. Port: (1) 4"x14.25"

T0D210/T0D410

10”

Dual 2 Ω or 4 Ω

14.8

81 dB

550

1100

9.13"

6.5"

0.203

0.75

1.50 cu ft. Port: (1) 4”x11”

T0D212/T0D412

12”

Dual 2 Ω or 4 Ω

14.8

84 dB

700

1400

11.25"

6.9"

0.308

1.25

1.75 cu ft. Port: (1) 4”x9”

T0D215/T0D415

15”

Dual 2 Ω or 4 Ω

14.8

87 dB

800

1600

13.94"

8.4"

0.547

2.25

2.66 cu ft. Port: (1) 4”x10”

P3D2-10/P3D4-10

10”

Dual 2 Ω or 4 Ω

13.9

82 dB

500

1000

9.13"

6.2"

0.127

0.59

1.40 cu ft. Port: (1) 4”x14”

P3D2-12/P3D4-12

12”

Dual 2 Ω or 4 Ω

13.9

85 dB

600

1200

11.25"

6.7"

0.194

1.02

1.79 cu ft. Port: (1) 4”x10”

P3D2-15/P3D4-15

15”

Dual 2 Ω or 4 Ω

13.9

86 dB

600

1200

13.94"

7.6"

0.247

1.58

2.66 cu ft. Port: (1) 4”x10”

P3SD2-8/P3SD4-8 SHALLOW

8”

Dual 2 Ω or 4 Ω

8.4

82 dB

150

300

7.13”

2.7”

0.040

0.25

0.75 cu ft. Port: (1) 3”x9”

P3SD2-10/P3SD4-10 SHALLOW

10”

Dual 2 Ω or 4 Ω

8.4

83 dB

300

600

9.13”

3.5”

0.074

0.50

1.00 cu ft. Port: (1) 4”x12”

P3SD2-12/P3SD4-12 SHALLOW

12”

Dual 2 Ω or 4 Ω

8.4

85 dB

400

800

11.25”

3.7”

0.086

1.00

1.25 cu ft. Port: (1) 4”x12”

P2D2-8/P2D4-8

8”

Dual 2 Ω or 4 Ω

7.8

83 dB

250

500

7.13"

4.8"

0.071

0.23

0.65 cu ft. Port: (1) 2”x8”

P2D2-10/P2D4-10

10”

Dual 2 Ω or 4 Ω

84 dB

300

600

9.13"

5.9"

0.088

0.59

1.40 cu ft. Port: (1) 4”x14”

P2D2-12/P2D4-12

12”

Dual 2 Ω or 4 Ω

13.3

86 dB

400

800

11.25"

6.4"

0.170

1.02

1.79 cu ft. Port: (1) 4”x10”

P2D2-15/P2D4-15

15”

Dual 2 Ω or 4 Ω

13.3

86 dB

400

800

13.94"

7.3"

0.219

1.58

2.66 cu ft. Port: (1) 4”x10”

P1S2-8/P1S4-8

8”

Single 2 Ω or 4 Ω

7.6

83.5 dB

200

400

7.13"

4.4"

0.053

0.23

0.65 cu ft. Port: (1) 2”x6”

P1S2-10/P1S4-10

10”

Single 2 Ω or 4 Ω

9.4

85 dB

250

500

9.13"

5.3"

0.085

0.59

1.40 cu ft. Port: (1) 3”x8”

P1S2-12/P1S4-12

12”

Single 2 Ω or 4 Ω

9.4

86 dB

250

500

11.25"

6.0"

0.113

1.02

1.79 cu ft. Port: (1) 3”x6”

P1S2-15/P1S4-15

15”

Single 2 Ω or 4 Ω

9.4

87.5 dB

250

500

13.94"

7.0"

0.191

1.58

2.66 cu ft. Port: (1) 4”x8”

R2D2-10/R2D4-10

10”

Dual 2 Ω or 4 Ω

6.5

89 dB

250

500

9.13"

4.3"

0.101

0.59

1.40 cu ft. Port: (1) 4”x13”

R2D2-12/R2D4-12

12”

Dual 2 Ω or 4 Ω

6.5

87 dB

250

500

11.25"

5.1"

0.150

1.02

1.79 cu ft. Port: (1) 4”x9.3”

R2SD2-10/R2SD4-10 SHALLOW

10”

Dual 2 Ω or 4 Ω

83 dB

200

400

9.13"

3.4"

0.037

0.70

1.40 cu ft. Port: (1) 4”x13.7”

R2SD2-12/R2SD4-12 SHALLOW

12”

Dual 2 Ω or 4 Ω

85 dB

250

500

11.25"

3.6"

0.039

0.90

1.79 cu ft. Port: (1) 4”x11.8”

R1S4-10

10”

Single 4 Ω

7.0

87 dB

200

400

9.13"

4.4"

0.06

0.75

1.4 cu ft. Port: (1) 3”x8”

R1S4-12

12”

Single 4 Ω

7.0

90 dB

200

400

11.25"

4.94"

0.10

1.02

1.79 cu ft. Port: (1) 3”x6”

[ SUBWOOFER ENCLOSURE SPECIFICATIONS [ Speaker Model

Nominal Impedance

RMS Power Handling

Peak Power Handling

Dimensions (HxWxD)

P3-2X10

(2) P3D4-10

1Ω

1000 Watts

2000 Watts

13.125” x 31.125” x 15.125”

P3-1X10

(1) P3D2-10

1Ω

500 Watts

1000 Watts

P3-2X12

(2) P3D4-12

1Ω

1200 Watts

2400 Watts

P3-1X12

(1) P3D2-12

1Ω

600 Watts

1200 Watts

P2-2X10

(2) P2D4-10

1Ω

600 Watts

P2-1X10

(1) P2D2-10

1Ω

P2-2X12

(2) P2D4-12

1Ω

P2-1X12

(1) P2D2-12

1Ω

2015 BUYER’S GUIDE

Speaker Model

Nominal Impedance

RMS Power Handling

Peak Power Handling

Dimensions (HxWxD)

P1-2X10

(2) P1S4-10

2Ω

500 Watts

1000 Watts

13.125” x 31.125” x 15.125”

13.125” x 17.0” x 15.125”

P1-1X10

(1) P1S4-10

4Ω

250 Watts

500 Watts

13.125” x 17.0” x 15.125”

15.125” x 33.875” x 15.75”

P1-2X12

(2) P1S4-12

2Ω

500 Watts

1000 Watts

15.125” x 33.875” x 15.75”

15.125” x 19.125” x 15.75”

P1-1X12

(1) P1S4-12

4Ω

250 Watts

500 Watts

15.125” x 19.125” x 15.75”

1200 Watts

13.125” x 31.125” x 15.125”

R1-1X10

(1) R1S4-10

4Ω

200 Watts

400 Watts

12.0” x 15.825” x 12.25”

300 Watts

600 Watts

13.125” x 17.0” x 15.125”

R1-2X10

(2) R1S4-10

2Ω

400 Watts

800 Watts

12.0” x 30.0” x 12.25”

800 Watts

1600 Watts

15.125” x 33.875” x 15.75”

R1-1X12

(1) R1S4-12

4Ω

200 Watts

400 Watts

14.0” x 17.5” x 12.25”

15.125” x 19.125” x 15.75”

R1-2X12

(2) R1S4-12

2Ω

400 Watts

800 Watts

14.0” x 33.75” x 12.25”

400 Watts

800 Watts

Injection Molded Foam Surround with VAST™

Aluminum Dustcap

Tall profile, Santoprene™ with VAST™

Trim Ring

Aluminum Dia Cast Frame with Integrated Heat Sink Fins and Venting

Dual Gap Multi‐Pole Neodymium Push/Pull Motor Structure

Custom Push Spring Insulated 4 AWG Terminals

Integrated Die Cast Aluminum Trim Ring

Triple Stack Segmented Ferrite Motor Structure

Custom Push Spring Insulated 8 AWG Terminals

Detachable Die Cast Aluminum Trim Ring

Dual Nomex Progressive Spiders

Single Layer Edge Wound Aluminum 4" Voice Coil

Tall profile, Santoprene™ with VAST™

Terminal Connectors

Voice Coil Dual Separated Single Layer Edge Wound Aluminum 5" Voice Coils

Motor Structure

Cone Material Three Layer Glass Fiber/ Aramid Honeycomb/ Glass Fiber

Frame Structure

Dustcap Material Aluminum Dustcap

Spider

Surround Material Injection Molded Foam Surround with VAST™

Kevlar® fiber reinforced semi-pressed paper

3" 4-layer ultra-high temp. aluminum voice coil with spun-laced Nomex™ insulating reinforcement collar

Dual mirror imaged, progressive roll tear & fatigue resistant poly-cotton spider with multipoint stitched lead wire technique and proprietary spider cooling vents

Die-cast aluminum with FlexFit™

Double stack ferrite magnet with extended vented pole and bumped vented backplate with IDHS™

Dual 10 Ga. proprietary SWIFT™ terminal

Reversible die-cast aluminum w/ Soft Touch paint and integrated/ removable grille

Three Layer Carbon Fiber/Rohacell/ Glass Fiber

Dual Wound Single 3" Voice Coil with Interior and Exterior Windings

Dual Nomex Progressive Spiders

Aluminum Dia Cast Frame with Integrated Heat Sink Fins

High Temp High Energy Neodymium Motor Structure

Custom Push Spring Insulated 10 AWG Terminals

Detachable Die Cast Aluminum Trim Ring

Kevlar® fiber reinforced semi-pressed paper

3” 4-layer ultra-high temp. aluminum voice coil with spun-laced Nomex™ insulating reinforcement collar

Dual mirror imaged, progressive roll tear & fatigue resistant poly-cotton spider with multipoint stitched lead wire technique and proprietary spider cooling vents

Die-cast aluminum with FlexFit™

Double stack ferrite magnet with extended vented pole and bumped vented backplate with IDHS™

Dual 10 Ga. proprietary SWIFT™ terminal

Reversible die-cast aluminum w/ Soft Touch paint and integrated/ removable grille

Hard anodized aluminium

Tall profile, Santoprene™ with VAST™

Hard anodized aluminum

2.5" 4-layer ultra-high temp. aluminum voice coil with spun-laced Nomex™ insulating reinforcement collar

Dual mirror imaged, progressive roll tear & fatigue resistant poly-cotton spider with multipoint stitched lead wire technique and proprietary spider cooling vents

StampCast™ with FlexFit™

Double stack ferrite magnet with extended vented pole and bumped vented backplate

8 Ga. custom insulated/isolated compression style

Reversible die-cast aluminum w/ Soft Touch paint and optional integrated grille

M-roll, Santoprene™ with VAST™

Hard anodized aluminum

2.5” 4-layer ultra-high temp. aluminum voice coil with spun-laced Nomex™ insulating reinforcement collar

Dual laminated, progressive roll tear & fatigue resistant poly-cotton spiders with embedded lead wire technique and proprietary spider cooling vents

StampCast™ with FlexFit™

Ferrite magnet structure with extended vented pole and bumped vented backplate

8 Ga. custom insulated/isolated compression style

Reversible die-cast aluminum w/ Soft Touch paint and optional grille

Tall profile, Santoprene™ with VAST™

Kevlar fiber reinforced semi-pressed paper

Kevlar® fiber reinforced semi-pressed paper

2.25" 4-layer high temp. aluminum voice coil with spun-laced Nomex™ insulating reinforcement collar

Dual mirror imaged, progressive roll tear & fatigue resistant poly-cotton spider with multipoint stitched lead wire technique and proprietary spider cooling vents

StampCast™ with FlexFit™

Double stack ferrite magnet structure with extended vented pole and bumped backplate

8 Ga. custom insulated/isolated compression style

Reversible die-cast aluminum w/ Soft Touch paint and optional integrated grille

Half-roll, high density Nitrile Butadiene Rubber

Kevlar fiber reinforced semi-pressed paper

Kevlar® fiber reinforced semi-pressed paper

2" 4-layer high temp. aluminum voice coil with spun-laced Nomex™ insulating reinforcement collar

Tear & fatigue resistant polycotton spider with multipoint stitched lead wire technique and proprietary spider cooling vents

StampCast™ with FlexFit™

Ferrite magnet structure with extended vented pole and bumped backplate

8 Ga. custom insulated/isolated compression style

Reversible Acrylonitrile Butadiene Styrene with optional integrated grille

Half-roll, Sealed Polyether-ester foam

Polypropylene

2" 4-layer high temp. aluminum voice coil with spun-laced Nomex™ insulating reinforcement collar

Tear & fatigue resistant polycotton spider with multipoint stitched lead wire technique and spider cooling vents

Stamped steel

Ferrite magnet structure with extended vented pole and bumped backplate

Standard 10 Ga.

Integrated Polyvinyl Chloride trim ring

Injection molded Polypropylene

Laser-etched aluminum

Fiber re-inforced paper pulp

2" 4-layer high temp. copper voice coil with aluminum former

Integrated ABS

Speaker Model

Nominal Impedance

RMS Power Handling

Peak Power Handling

Dimensions (HxWxD)

P3S-1X10

(1) P3SD2-10

1Ω

300 Watts

600 Watts

13.5" x 19.0" x 5.3"/3.3"

P3S-1X12

(1) P3SD2-12

1Ω

400 Watts

800 Watts

13.5" x 27.4" x 5.3"/3.3"

Speaker Model

Nominal Impedance

RMS Power Handling

Peak Power Handling

Dimensions (HxWxD)

R2S-1X10

(1) R2SD4-10

2Ω

200 Watts

400 Watts

13.5” x 19.0” x 5.3”/3.3”

R2S-1X12

(1) R2SD4-12

2Ω

250 Watts

500 Watts

13.5” x 27.4” x 5.3”/3.3”

ROCKFORDFOSGATE.COM Don’t forget to use our Woofer Wiring Wizard to properly wire woofers to your amplifier or our Woofer Box Advisor for optimized enclosure bass performance.

SPEAKERS

150 1

WATTS

UNPRECEDENTED POWER AND CONTROL

UP TO RMS POWER HANDLING

YEAR

LIMITED WARRANTY

40 - 30 Hz

kHz

FREQUENCY RESPONSE

HISTORY OF PERFORMANCE

WATTS

75 1

UP TO RMS POWER HANDLING

YEAR

LIMITED WARRANTY

43 - 22 Hz

kHz

FREQUENCY RESPONSE

THE PERFECT FIRST STEP

YEAR

WATTS

65 1

UP TO RMS POWER HANDLING

LIMITED WARRANTY

47 - 20 Hz

kHz

FREQUENCY RESPONSE

MODELS SHOWN | T5652-S

MODELS SHOWN | T4652-S

MODELS SHOWN | T3652-S

MODELS SHOWN | T2652-S

2015 BUYER’S GUIDE

OUTPUT YOU EXPECT, SOUND QUALITY YOU NEVER IMAGINED If youâ&#x20AC;&#x2122;re truly serious about high quality sound, our Power family of speakers are what you need. Built on years of knowledge in acoustic engineering, Rockford Fosgate delivers a family of speakers that is industry leading. From our class leading T5 series of audiophile components down to our T1 coaxial speakers, the Power family focuses on providing you the best musical experience youâ&#x20AC;&#x2122;ve ever had.

MODELS SHOWN | T1693, T1650-S, T1650, T142

Plus, by incorporating design features such as VAST technology for up to a 25% increase in cone area, which means not only more output for you but a better overall frequency response to our Flex Fit baskets for improved mounting fitment and shorter installation times. The Power family of speakers takes top honors among even the most discerning music aficionados.

FOR THOSE WHO LIKE IT RAW AND LOUD Are you someone who really likes to “feel” your music? If so then check out the Punch family of speakers. When you’re ready to upgrade and you really want something that can deliver crisp, clear vocals and have the low end response to back them up, then you’ve found them. Using the same VAST technology found on our Power line of speakers, the Punch line is able to produce deeper bass and more volume output than the competition.

MODELS SHOWN | P1694, P1650, P165-SE, P142

2015 BUYER’S GUIDE

With a variety of coaxial and component model speakers ranging in size from 3.5 inches to 6x9 inches, the Punch series is ideal for the customer wanting to roll the windows down, crank the music up and cruise the streets with their buddies.

WHEN LOUD JUST ISN’T LOUD ENOUGH If you’re someone that really wants to pump up the level of your music to the extreme, then the Punch Pro series of speakers are for you. Rockford Engineers have found that there is a growing community of people who design their audio systems not so much towards sound quality, but more towards sound “QUANTITY”. It’s with this group in mind that led to the development of the Punch Pro speaker family. Designed with high efficiency and high power handling, these speakers are meant to take the power and play loud.

Available in a variety of tweeter and midrange sizes along with passive crossovers to compliment, Rockford has created a family of products that truly put the phrase “If it’s too loud, then you’re too old” to the test. So, if you want your audio system to not just be at the party, but “BE” the party, then you need to check them out.

MODELS SHOWN | PPS4-10, PPS4-6, PP4-NT, PP4-T

HIGH OUTPUT EXTREME LEVELS OF MID TO HIGH RANGE WILL BE EXPERIENCED

SCENARIOS TO CONSIDER WHEN USING THIS PRODUCT: A superior sensitivity yields low power (Watts) requirements. Their unique structure gives opportunity to an equally unique fitment. It is HIGHLY encouraged to incorporate a generous quantity of this product in one application for a preferred outcome.

To all the Rockford Fosgate Fanatics we would like to introduce the speakers to accompany your two strapped T2500-1bdCP pushing (2) T2 16’s… the PUNCH PRO speakers are guaranteed to provide HIGH OUTPUT full range for extreme SQL (Sound Quantity Level) systems.

AUTHENTIC SOUND AT A PRIME PRICE POINT Are you tired of listening to your factory speakers rattling away inside your doors? Do you want to turn up your factory radio and just get ”more” out of it than you have now? Then you need to check out the Prime family of speakers. Our Prime full range loudspeakers and components are a no-compromise design for that drop-in fit for your factory speaker location. Designed with an ultra-lightweight poly cone and dome tweeter, our Prime drivers are efficient enough to hook up directly to your factory head-unit for instant improvement. If you really want to improve the sound, connect them to an amplifier to increase the speaker’s output and overall performance.

MODELS SHOWN | R`169X3, R165X3, R14X2, R165-S

2015 BUYER’S GUIDE

VERTICAL ATTACH SURROUND TECHNIQUE Rockford’s proprietary surround technique, VAST, provides up to a 25% increase in the speakers effective radiating cone area without complicated installation issues. This design alters the typical design and manufacturing technique by eliminating the large flat glue surface area (the landing) which allows the surround to be shifted for increased cone area. In turn, both nominal efficiency and maximum output capabilities are dramatically improved. Products Featuring: VAST

FELX FIT 2 FLEX FIT 2 AND CAR MOUNTING SPEAKER LOCATION

The slot mounted frame pattern allows for variable adjustments to the mounting position, especially for Euro-Fit installations. Products Featuring: FLEX FIT 2

YOUTUBE.COM/ROCKFORDFOSGATE WATCH DETAILED VIDEOS ON OUR SPEAKER TECHNOLOGIES.

2015 BUYER’S GUIDE

DISCREET DUAL CLAMP Rockford’s proprietary tweeter mounting design provides concentric clamping pressure around the perimeter of the mounting hole, utilizing a single center screw. This applies balanced pressure to both faces of the mounting surface. From there, the tweeter simply snaps into place and is finished with a snap on trim ring. Products Featuring: DDC

RF LINK Rockford’s proprietary RF Link is a bus-power component connection system enabling integration and control of all RF Link equipped products. The use of this systems allows for the expansion of auxiliary controls and managed system turn on. Products Featuring: RFLINK

INTEGRATED CONCEALED CROSSOVER The Integrated Concealed Crossover hides the crossover inside the basket, creating a cleaner look and easier installation. Products Featuring: ICC

Klippel DA-2 (Designed) Klippel PM-8 (Developed) Klippel QC (Tested)

Products Verified with KLIPPEL

SPEAKER PERFORMANCE LINEUP Accuracy Score - Is derived from calculating the magnitude deviations from the speakerâ&#x20AC;&#x2122;s frequency response against a reference flat magnitude response.

ACCURACY SCORE FREQ. RESPONSE RANGE PEAK POWER

Frequency Response Range - The frequency response range or width tells you how high or low the speaker plays. BASS

MID

HIGH

Peak Power - The maximum amount of amplifier power that can be applied to a speaker prior to entering into an unsafe operating scenario.

f r a m e wo r k OF A SPEAKER

Modifications to the framework of a speaker significantly impact its sonic signature. Combining various materials will strengthen, add volume and resonate the music to a desired sound. By intertwining superior speaker designs with Rockfordâ&#x20AC;&#x2122;s proprietary acoustic technologies in our speaker lineup, we are sure to bring your music to life.

SURROUND

CONE

TWEETER

BASKET CROSSOVEr MAGNET

MATERIAL HIErARCHY

BESt

GOOD

2015 BUYERâ&#x20AC;&#x2122;S GUIDE

Tweeter - Composed of the same parts as an speaker, surround, cone, voice coil, basket and magnet. Just on a smaller scale.

Cone - A.K.A the diaphragm, this is the voice of the speaker. Shape and material dramatically change tonality.

Crossover - Works like a switch board, directing the audio signal through caps, filters and switches to the appropriate speaker.

Basket - Also referred to as the frame or chassis, this is the skeletal system of the speaker. Here to keep everything in their place.

Surround - Works in harmony with the spider, attached to the cone to maintain the centering of the voice coil in the magnetic gap.

Magnet - The heart of speaker, creating the force to push and pull cone assembly. Size, material, and design may differ, depending on performance goals.

2WAY 6.5” COMPONENTS

1”(25mm) Liquid Crystal Polymer Fiber Ring Radiator Dome, Dual Neodymium Magnets w/ IDHS™, Low Resonant Chamber and DDC™ RFLink™ Equipped External Component Crossover w/ 1% Mil-Spec Parts and I elligent Protection w/ Integrated/Remote Tuning Module Butyl Rubber w/ VAST™ Tri-laminate Liquid Crystal Polymer Fiber w/ Machined Copper Phase Plug • Designed and engineered to produce the highest level of sound quality for the most discerning audiophile. • Our custom passive/ active crossover allows you to fine tune the system to suit your taste using the integrated remote control. • The solid copper heat sink and phase plug draw heat away from the voice coil improving sound quality and increasing power handling.

Die-Cast Aluminum w/ FlexFitTM Multi-Pole™ Dual Neodymium Magnet w/ IDHS™ *T5652-S MODEL SHOWN

2WAY 6.5” COMPONENTS

1”(25mm) Liquid Crystal Polymer Fiber Ring Radiator Dome, Dual Neodymium Magnets w/ IDHS™, Low Resonant Chamber and DDC™ External Audiophile Grade ComponentCrossover w/ 5% (Tol) Parts Butyl Rubber w/ VAST™ Tri-laminate Liquid Crystal Polymer Fiber

• The T4 components are highly accurate in their frequency reproduction by utilizing the same tweeter, basket and motor structure from the T5. components combined with the cone and crossover from the T3 components. • The multi-pole Neodymium motor structure maximizes excursion capability and control under extreme output conditions. • The Liquid Crystal polymer Fiber cone is lightweight and rigid which improves sound quality and output without distorting cone flex.

Die-Cast Aluminum w/ FlexFitTM Multi-Pole™ Dual Neodymium Magnet w/ IDHS™ *T4652-S MODEL SHOWN

2WAY 6.5” COMPONENTS

1”(25mm) Liquid Crystal Polymer Fiber Dome w/ Neodymium Magnet and DDC™ External Audiophile Grade Component Crossover w/ 5% (Tol) Parts Butyl Rubber w/ VAST™ Woven Liquid Crystal Polymer Fiber Die-Cast Aluminum w/ FlexFitTM Neodymium Magnet w/ IDHS™ *T3652-S MODEL SHOWN

COMPONENTS

• Our LCP tweeter with silk surround provides clean, crisp high frequency reproduction without worrying about distortion at higher volumes. • Our components feature our discrete Dual Clamping system for the tweeters which provides for a more secure installation than other clamping designs. • The crossover network features bi-amp capabilities if your system calls for amplifying the tweeter separate from the midrange speaker.

2WAY 6.5” 5.25” Tweeter Kit

1”(25mm) Aluminum Dome w/ Neodymium Motor and DDC™ External Audiophile Grade Component Crossover w/ 5% (Tol) Parts Butyl Rubber w/ VAST™ Injection Molded Polypropylene-Carbon Fiber Blend w/ Machined Aluminum Phase Plug StampCastTM w/ FlexFitTM Neodymium Magnet w/ IDHS™ *T2652-S MODEL SHOWN

2015 BUYER’S GUIDE

• Our injection molded, carbon fiber reinforced cone assembly reduces cone flex while maintaining sound quality. • Our midrange speakers utilize our VASTTM technology, which can provide for up to 25% more cone area meaning better frequency response and increased output. • Our StampCastTM aluminum basket design provides a rigid framework and eliminates frame flex under high power applications.

2WAY 6.75” 6.5” COMPONENTS 6.0” 5.25” Tweeter Kit

1”(25mm) Treated Fabric Dome w/ Neodymium Motor and DDC™ External Audiophile Grade Component Crossover w/ 5% (Tol) Parts Butyl Rubber w/ VAST™ Injection Molded Polypropylene-Carbon Fiber Blend

• Our FlexFitTM and FlexFit 2TM mounting hole patterns improve the fitment of our speakers as well as expand the number of vehicles the speakers will fit in. (Also found on T1650 Coax). • The 1” fabric dome tweeter provides natural sounding high frequencies while the midrange delivers the lows with precision.

StampCastTM w/ FlexFitTM and FlexFit2TM Single Ferrite Magnet *T1675-S MODEL SHOWN

COAXIALS

2WAY 6.75” 6.5” 6.0” 5.25” 4.0”

2WAY 6x9” 6x8” 5x7” 4x6”

1”(25mm) Aluminum Dome w/ Neodymium Motor ICC™ Component Crossover w/ 5% (Tol) Parts Blutyle Rubber w/ VAST™ Injection Molded Mineral Filled Polypropylene w/ Carbon Fiber Blend StampCastTM w/ FlexFitTM and FlexFit2TM • Our offset cantilever mounted tweeter (select models) eliminates damaging acoustic reflections between the midrange and the rear of the tweeter. • A perfect choice to replace your factory speaker and attain high quality sound output without needing extensive modification to the vehicle.

Single Ferrite Magnet *T1650 MODEL SHOWN

3WAY 6x9”

COMPONENTS

2WAY 6.75” 6.5” 6.0” 5.25” Tweeter Kit

1”(25mm) Plated Polyether Imide (PEI) Dome w/ Neodymium Motor and DDC™ ICC™ Component Crossover w/ 10% (Tol) Parts Nitrile Butadiene Rubber w/ VAST™ Injection Molded Mineral Filled Polypropylene StampCastTM w/ FlexFitTM and FlexFit2TM

• Punch components feature both FlexFitTM and FlexFit 2TM basket designs for improved factory mounting compatibility (Also found on P1650 Coax). • Most models feature an integrated concealed crossover system so there is no additional crossover box to install.

Single Ferrite Magnet *P1675-S MODEL SHOWN

COAXIALS

2WAY 6.5” 6x9” 6.0” 5x7” 5.25” 4x6” 4.0” 3.5”

3WAY 6.75” 6x9” 6x8” 4WAY 6x9”

1”(25mm) Plated Polyether Imide (PEI) Dome w/ Neodymium Motor and DDC™ ICC™ w/ 10% (Tol) Parts Nitrile Butadiene Rubber w/ VAST™ Injection Molded Mineral Filled Polyprpylene StampCastTM w/ FlexFitTM and FlexFit2TM Single Ferrite Magnet *P1650 MODEL SHOWN

2015 BUYER’S GUIDE

• Punch coax speakers are ideal for the customer who likes to really “feel” their music. • A perfect “step-up’’ choice when looking to design an amplified speaker system to replace your worn out factory speakers.

TWEETER 1.0” 4Ω 8Ω

1”(25mm) Horn Design w/ Machined Aluminum Phase Plug Integrated High-Pass Crossover N/A N/A Die-Cast Aluminum • Our 1 inch horn loaded tweeter is designed for high SPL applications. • The Neodymium motor structure and cast aluminum housing allows for a compact design for tight spaces.

Neodymium Magnet w/ IDHSTM *PP4-NT MODEL SHOWN

TWEETER 1.5” 4Ω 8Ω

1.5”(38mm) Horn Design w/ Machined Aluminum Phase Plug Integrated High-Pass Crossover N/A N/A Die-Cast Aluminum w/ FlexFitTM

• With its oversized motor structure and high temperature voice coil our 1.5 inch Pro tweeter is designed for high SPL systems.

Single Ferrite Magnet *PP4-T MODEL SHOWN

MIDRANGE 6.0” 4Ω 8.0” 8Ω 10.0”

N/A N/A W-Style, Treated Cloth Fiber Reinforced Paper w/ Machined Aluminum Phase Plug StampCastTM w/ FlexFitTM • High efficiency driver designed for extreme output capabilities. • The fiber reinforced cone with machined aluminum phase plug creates a highly sensitive speaker that can handle plenty of power.

Single Ferrite Magnet *PPS4-6 MODEL SHOWN

CROSSOVER 4Ω 8Ω

N/A External Audiophile Grade Component Crossover w/ 5% (Tol) Parts N/A N/A N/A N/A *PP4-X MODEL SHOWN

2015 BUYER’S GUIDE

• Punch Pro crossover is designed to work with our Pro tweeters and midrange speakers. • Available in a 4 or 8 ohm model. • Allows connection of multiple midrange speakers to a single crossover.

COMPONENTS

2WAY 6.75” 6.5” 6.0” 5.25” Tweeter Kit

1”(25mm) Mylar Balanced Dome Integrated High-Pass Crossover SPE Foam Vacuum Formed Polypropylene Stamped Steel • A dedicated 2-way component system utilizing a Mica injected polypropylene cone for extended frequency response and accommodates direct OEM installation. • The Mylar balanced dome tweeter recreates crystal clear highs and comes with an in-line crossover for simplified installation.

Single Ferrite Magnet *R165-S MODEL SHOWN

COAXIALS

2WAY 6.75” 5.25” 4.0” 6x9” 6x8”

3WAY 6.5” 6x9”

1/2”(13mm) Embedded Phase Coherent Mylar Balanced Dome Integrated High-Pass Crossover Nitrile Butadiene Rubber Vacuum Formed Polypropylene Stamped Steel Single Ferrite Magnet • The basket design allows for that perfect factory replacement fit. • Their high efficiency design works great with radio or amplifier power.

*R1675X2 MODEL SHOWN

2015 BUYER’S GUIDE

Peak Power Handling (watts)

Frequency Response

Sensitivity (1W/1M)

Sensitivity (2.83V/1M)

Mounting Depth

1”

150 watts

300 watts

45Hz-40kHz

88.5dB

91.5dB

2.48”

T4652-S

6.5”

1”

150 watts

300 watts

40Hz-30kHz

89dB

92dB

2.79”

T3652-S

6.5”

1”

125 watts

250 watts

48Hz-24kHz

87dB

90dB

2.48”

T252-S

5.25”

1”

75 watts

150 watts

65Hz-22kHz

87dB

90dB

1.97”

T2652-S

6.5”

1”

100 watts

200 watts

50Hz-22kHz

88dB

91dB

2.48”

T2T-S

N/A

1”

100 watts

200 watts

3kHz-22kHz

90dB

93dB

*0.91”

T152-S

5.25”

1”

75 watts

150 watts

65Hz-22kHz

87dB

90dB

1.99”

T16-S

6.0”

1”

80 watts

160 watts

60Hz-22kHz

86dB

89dB

1.93”

T1650-S

6.5"

80 watts

160 watts

47Hz - 20kHz

88 dB

91 dB

2.52"

T1675-S

6.75”

1”

100 watts

200 watts

55Hz-22kHz

89dB

92dB

2.51”

T1T-S

N/A

1”

100 watts

200 watts

3kHz-22kHz

90dB

93dB

*0.91”

T142

4”

0.75”

40 watts

80 watts

85Hz-22kHz

86dB

89dB

1.79”

T152

5.25”

1”

60 watts

120 watts

65Hz-22kHz

86.5dB

89.5dB

1.99”

T16

6.0”

1”

70 watts

140 watts

65Hz-22kHz

88dB

91dB

1.93”

T1650

6.5"

75 watts

150 watts

44Hz - 20kHz

88 dB

91 dB

2.52"

T1675

6.75”

1”

75 watts

150 watts

50Hz-22kHz

89dB

92dB

2.51”

T1462

4”x6”

0.75”

45 watts

90 watts

75Hz-22kHz

85.5dB

88.5dB

2.00”

T1572

5”x7”

1”

70 watts

140 watts

60Hz-22kHz

87dB

90dB

2.35”

T1682

6”x8”

1”

80 watts

160 watts

55Hz-22kHz

88dB

91dB

2.60”

T1692

6”x9”

1”

100 watts

200 watts

50Hz-22kHz

90dB

93dB

3.39”

T1693

6”x9”

1”

100 watts

200 watts

50Hz-22kHz

91dB

94dB

3.39”

P152-S

5.25”

1”

50 watts

100 watts

70Hz-22kHz

87dB

90dB

1.91”

P16-S

6.0”

1”

60 watts

120 watts

60Hz-22kHz

87.2dB

90.2dB

1.93”

P165-SE

6.5"

60 watts

120 watts

43Hz - 20kHz

88 dB

91 dB

2.24"

P165-SI

6.5"

60 watts

120 watts

44Hz - 20kHz

88 dB

91 dB

2.24"

P1675-S

6.75”

1”

60 watts

120 watts

55Hz-22kHz

89dB

92dB

2.24”

P1T-S

N/A

1”

60 watts

120 watts

3.5kHz-22kHz

90dB

93dB

*0.91”

P132

3.5”

0.5”

20 watts

40 watts

120Hz-22kHz

85dB

88dB

1.46”

P142

4”

0.75”

30 watts

60 watts

100Hz-22kHz

86.5dB

89.5dB

1.75”

P152

5.25”

0.75”

40 watts

80 watts

70Hz-22kHz

87dB

90dB

1.91”

P16

6.0”

0.75”

55 watts

110 watts

65Hz-22kHz

88dB

91dB

1.93”

P1650

6.5"

0.75"

55 watts

110 watts

45Hz - 20kHz

88 dB

91 dB

2.24"

P1675

6.75”

0.75”

60 watts

120 watts

60Hz-24kHz

89dB

92dB

2.24”

P1462

4”x6”

0.75”

35 watts

70 watts

90Hz-22kHz

87.5dB

90.5dB

1.89”

P1572

5”x7”

0.75”

60 watts

120 watts

75Hz-22kHz

89dB

92dB

2.30”

P1683

6”x8”

0.75”

65 watts

130 watts

65Hz-24kHz

90dB

93dB

2.32”

P1692

6”x9”

0.75”

75 watts

150 watts

60Hz-22kHz

91dB

94dB

3.07”

Spider

RMS Power Handling (watts)

6.5”

Cone Material

Tweeter Size

T5652-S

Surround Material

Speaker Size

[ SPEAKER SPECIFICATIONS [

Butyl rubber with VAST™

Tri-laminate Liquid Crystal Polymer Fiber w/ machined copper phase plug

Nomex™ w/ balanced stitched woven embedded fiber/flat lead wires

Tri-laminate Liquid Crystal Polymer Fiber™

Nomex™ w/ balanced stitched woven embedded fiber/flat lead wires

Woven Liquid Crystal Polymer Fiber™

Nomex™ w/ balanced stitched woven embedded fiber/flat lead wires

Injection molded Polypropylene-carbon fiber blend w/ machined aluminum phase plug

Fatigue resistant polycotton linear spider w/ woven fiber reinforced lead wire

Aluminum dome w/ integral suspension & tuned chamber Injection molded Polypropylene-carbon fiber blend

Fatigue resistant polycotton linear spider w/ woven fiber reinforced lead wire

Treated fabric dome w/ integral suspension & tuned chamber Butyl rubber with VAST™

Injection molded Polypropylene-carbon fiber blend

Fatigue resistant polycotton linear spider w/ woven fiber reinforced lead wire

Nitrile Butadiene Rubber with VAST™

Injection molded mineral filled Polypropylene

Fatigue resistant polycotton linear spider w/ woven fiber reinforced lead wire

Plated Polyether Imide (PEI) dome Nitrile Butadiene Rubber with VAST™

Injection molded mineral filled Polypropylene

Fatigue resistant polycotton linear spider w/ woven fiber reinforced lead wire

Terminal Connectors

Single chassis stereo w/ audiophile 1% mil-spec components and dual micro-controller for intelligent protection w/ integrated/remote tuning module and RFLink™ equipped

3-way connection terminal

Cat 5 remote extension cable, grilles and mounting hardware

Die-cast aluminum with FlexFit™

Multi-pole™ dual neodymium magnet w/ IDHS™

1”(25mm) Liquid Crystal Polymer Fiber ring radiator dome, dual neodymium magnets w/ IDHS™, low resonant chamber and DDC™

External audiophile grade component crossover w/ 5% (Tol) parts

3-way connection terminal

Grilles and mounting hardware

Die-cast aluminum with FlexFit™

Neodymium magnet w/ IDHS™

1"(25mm) Liquid Crystal Polymer Fiber™ dome w/ neodymium magnet and DDC™

External audiophile grade component crossover w/ 5% (Tol) parts

3-way connection terminal

Grilles and mounting hardware

StampCast™ with Flex-fit™

Ferrite magnet structure

1”(25mm) aluminum dome w/ neodymium motor and DDC™

External audiophile grade component crossover w/ 5% (Tol) parts

Unified tab

Multi-OEM™ adaptor plates, grilles and mounting hardware

18 Ga. Pigtail

Flush w/ DDC™, surface and angle mounting hardware

External audiophile grade component crossover w/ 5% (Tol) parts

Unified tab

Multi-OEM™ adaptor plates, grilles and mounting hardware

External audiophile grade component crossover w/ 5% (Tol) parts

18 Ga. Pigtail

Flush w/ DDC™, surface and angle mounting hardware

Neodymium

StampCast™ with Flex-fit™

Ferrite magnet structure

1”(25mm) treated fabric dome w/ neodymium motor and DDC™

Neodymium

Accessories

1"(25mm) Liquid Crystal Polymer Fiber ring radiator dome, dual neodymium magnets w/ IDHS™, low resonant chamber and DDC™

Crossover

Motor Structure Multi-pole™ dual neodymium magnet w/ IDHS™

Tweeter

Frame Structure Die-cast aluminum with FlexFit™

StampCast™ with Flex-fit™

Ferrite magnet structure

1”(25mm) aluminum dome w/ neodymium motor and DDC™

ICC™ component crossover with 5% (Tol) parts

Unified tab

Multi-OEM™ adaptor plates, grilles and mounting hardware

StampCast™ with Flex-fit™

Ferrite magnet structure

1”(25mm) plated Polyether Imide (PEI) dome w/ neodymium motor and DDC™

ICC™ component crossover with 10% (Tol) parts

Unified tab

Multi-OEM™ adaptor plates, grilles and mounting hardware

External component crossover w/ 10% (Tol) parts

18 Ga. Pigtail

Flush w/ DDC™, surface and angle mounting hardware

ICC™ with 10% (Tol) parts

Unified tab

Multi-OEM™ adaptor plates, grilles and mounting hardware

Neodymium StampCast™ with Flex-fit™

Ferrite magnet structure

3/4”(20mm) pole mounted plated Polyether Imide (PEI) dome w/ neodymium motor

2015 BUYER’S GUIDE

Peak Power Handling (watts)

Frequency Response

Sensitivity (1W/1M)

Sensitivity (2.83V/1M)

Mounting Depth

0.75”

75 watts

150 watts

60Hz-24kHz

91dB

94dB

3.07”

PPS4-6

6.5”

N/A

100 watts

200 watts

85Hz-5kHz

92.5dB

95.5dB

2.24”

PPS8-6

6.5”

N/A

100 watts

200 watts

87Hz-5kHz

91.5dB

94.5dB

2.24”

PPS4-8

8.0”

N/A

125 watts

250 watts

80Hz-5kHz

94.5dB

97.5dB

2.91”

PPS8-8

8.0”

N/A

125 watts

250 watts

82Hz-5kHz

93dB

96dB

2.91”

PPS4-10

10.0”

N/A

350 watts

700watts

40Hz-3kHz

95dB

98dB

4.17”

PPS8-10

10.0”

N/A

350 watts

700watts

40Hz-3kHz

95dB

98dB

4.17”

PP4-NT

N/A

50 watts

100 watts

4kHz 20kHz

107 dB

110 dB

2.57"

PP8-NT

N/A

50 watts

100 watts

4kHz 20kHz

107 dB

110 dB

2.57"

PP4-T

N/A

1.5”

50 watts

100 watts

3kHz-20kHz

103dB

106dB

2.59”

PP8-T

N/A

1.5”

50 watts

100 watts

3kHz-20kHz

103dB

106dB

2.59”

R152-S

5.25”

1”

40 watts

80 watts

58Hz-20kHz

85dB

88dB

1.91”

R16-S

6.0”

1”

40 watts

80 watts

60Hz-20kHz

89dB

92dB

1.97”

R165-S

6.5”

1”

40 watts

80 watts

60Hz-20kHz

89dB

92dB

1.97”

R1675-S

6.75”

1”

40 watts

80 watts

55Hz-20kHz

89dB

92dB

2.00”

R1T-S

N/A

1”

40 watts

80 watts

2.5kHz-22kHz

72.5dB

75.5dB

*0.76”

R14X2

4”

0.5”

30 watts

60 watts

100Hz-20kHz

85dB

88dB

1.72”

R1525X2

5.25”

0.5”

40 watts

80 watts

62Hz-20kHz

88dB

91dB

1.93”

R165X3

6.5”

0.5”

45 watts

90 watts

52Hz-20kHz

91dB

94dB

2.15”

R1675X2

6.75”

0.5”

45 watts

90 watts

52Hz-20kHz

91dB

94dB

2.19”

R168X2

6”x8”

0.5”

55 watts

110 watts

51Hz-20kHz

87dB

91dB

2.54”

R169X2

6”x9”

0.5”

65 watts

130 watts

48Hz-20kHz

90dB

93dB

2.85”

R169X3

6”x9”

0.5”

65 watts

130 watts

47Hz-20kHz

90dB

93dB

2.85”

Nitrile Butadiene Rubber with VAST™

Injection molded mineral filled Polypropylene

Fatigue resistant polycotton linear spider w/ woven fiber reinforced lead wire

W-Style, Treated Cloth

Fiber reinforced paper w/ machined aluminum phase plug

Fatigue resistant polycotton linear spider w/ woven lead wire

N/A

SPE Foam

Vacuum formed PP

Fatigue resistant spider

Spider

RMS Power Handling (watts)

6”x9”

Cone Material

Tweeter Size

P1694

Surround Material

Speaker Size

[ SPEAKER SPECIFICATIONS [

Mylar balanced dome Nitrile Butadiene Rubber

Vacuum formed Polypropylene

Fatigue resistant spider

Motor Structure

Crossover

Terminal Connectors

Accessories

Ferrite magnet structure

3/4”(20mm) pole mounted plated Polyether Imide (PEI) dome w/ neodymium motor

ICC™ with 10% (Tol) parts

Unified tab

Multi-OEM™ adaptor plates, grilles and mounting hardware

StampCast™ with Flex-fit™

Ferrite magnet structure

N/A

ICC™ with 10% (Tol) parts

12 Ga. compression style

Grilles and mounting hardware

Die-cast aluminum with FlexFit™

Neodymium magnet structure

1.0” (25mm) horn design

ICC™ with 10% (Tol) parts

12 Ga. compression style

Mounting hardware

Ferrite magnet structure

1.5”(38mm) horn design

Ferrite magnet structure

1”(25mm) mylar balanced dome

Integrated high-pass crossover

Standard spade connector

Grilles and mounting hardware

18 Ga. Pigtail

Flush, surface and angle mounting hardware

Standard spade connector

Grilles and mounting hardware

Stamped steel

Ferrite magnet structure

Tweeter

Frame Structure StampCast™ with Flex-fit™

1/2”(13mm) Embedded Phase Coherent mylar balanced dome

Integrated high-pass crossover

1/2”(13mm) pole mounted mylar balanced dome

ROCKFORDFOSGATE.COM Don’t forget to use our Woofer Wiring Wizard to properly wire woofers to your amplifier or our Woofer Box Advisor for optimized enclosure bass performance.

VEHICLE INTEGRATION

DIGITAL PROCESSORS SIGNAL CONVERTERS POWERED LOADED DIRECT FIT SPEAKERS

ACCESSORIES

DIGITAL PROCESSORS / LINE DRIVER PROPRIETARY 3SIXTY TECHNOLOGY

When you make a product purchase that bears the Rockford Fosgate name, you are receiving the technology, engineering and innovation that has taken over three decades to hone. Our constant desire to push the performance envelope has lead us to develop proprietary amplifier topologies and acoustic/electrical technologies that put a spin on the normal and make it Rockford.

BLUETOOTH®

A2DP wireless audio streaming via the included dongle allows you to listen to audio from any BLUETOOTH enabled device.

RF LINK

Rockford’s proprietary RF Link is a bus-power component connection system enabling integration and control of all RF Link equipped products. The use of this system allows for the expansion of auxiliary controls and managed system turn on.

FREQUENCY NORMALIZATION OF AUDIO SIGNALS

U.S. Patent (7,778,718,B2)

Frequency normalization is achieved by characterizing the frequency response of the audio source based on a reference input signal. This reference input signal is used to establish a reference frequency response, which is stored in memory and used to select equalizer settings. The system restores missing spectral content by summing multiple input signals from the audio source. The system then normalizes the frequency response based on characterizations of the signal by utilizing equalizer settings from memory.

3SIXTY GRAPHIC USER INTERFACE (GUI)

3Sixty interactive graphic user interface allows for control of the crossover type, slope, high/low pass filter, the 248 band parametric eq, phase and time delay. 77

2015 BUYER’S GUIDE

INPUT CHANNEL CONFIGURATOR

OUTPUT CHANNEL CONFIGURATOR

CHANNEL SUMMING CONFIGURATOR

ADJUSTING INPUT GAIN

INTERACTIVE SIGNAL PROCESSOR

3SIXTY.3

The 3sixty.3 interactive signal processor is the perfect solution for those customers who want to add aftermarket equipment to their factory source unit, integrate their mobile devices, or have complete control over their audio signal. With features like Bluetooth streaming, selectable crossover types and a USB interface, the versatility is endless.

BALANCED LINE DRIVER Rockford’s 2 channel Balanced Line Driver improves the performance of any aftermarket or factory radio. Designed to eliminate system noise and compatible with high level (speaker) inputs or low level (RCA) inputs.

RF-BLD

UNIVERSAL PUNCH EQ Looking to add Rockford’s patented Punch EQ to any aftermarket audio system? Plus in need of features like high to low signal conversion, a line driver and auto turn-on.

RFPEQU

HIGH TO LOW CONVERTER What happens when your radio isn’t equipped with RCA inputs? Rockford offers high (speaker) to low (RCA) level converters in 2 or 4 channel versions.

RF-HLC4

Input/Output

AUX Inputs

Input Voltage Output Voltage

Auto Turn-On

8 Speaker/RCA Balanced/Unbalanced

Stereo/Digital (SPDIF)

2V-24V

8V RMS Unbalanced/Balanced

RF-BLD

2 Speaker/RCA Balanced/Unbalanced

N/A

650mV-10.5V

RFPEQU

2 Speaker/RCA Balanced

N/A

RF-HLC4

4 Speaker/4 RCA

RF-HLC

2 Speaker/4 RCA

3SIXTY.3

Remote

Dimensions

6V DC Offset

Master or Sub Level/PEQ/ EQ Presets/Input

H 1.75” x W 5.125” x L 9.25”

11V RMS Unbalanced 22V RMS Balanced

6V DC Offset

N/A

H 1.32” x W 5.90” x L 4.09”

600mV-10V

10V RMS Unbalanced

6V DC Offset

PEQ

H 1.1” x W 3.15” x L 4.72”

N/A

Up To 10.5v

Up To 3v

N/A

H 1” x W 1.56” x L 3.5”

N/A

Up To 10.5v

Up To 3v

N/A

H 1” x W 3” x L 3.5”

BLUETOOTH / POWERED LOADED UNIVERSAL STREAMING TO RCA

The RFBTRCA universal Bluetooth™ adapter allows you to wirelessly stream media (music library, Pandora, Rhapsody, etc) from a Bluetooth™ enabled device directly to an RCA input and is powered by a direct 12v power connection.

RFBTRCA

UNIVERSAL STREAMING TO AUXILLIARY

RFBTAUX

If your vehicle didn’t come with built-in Bluetooth, now you can easily stream music from your smart phone, tablet, or laptop directly to the vehicle’s AUX input, using our RFBTAUX Universal Bluetooth Adapter. Cable Length

AUX Output

Input Signal

USB Charging Voltage

RFBTAUX

5 ft.

1/8” Stereo Jack

BLUETOOTH V3.0+EDR

5V/1A

RFBTRCA

3 ft.

1/8” Stereo Jack

BLUETOOTH V3.0+EDR

N/A

POWERALL MOBILE DEVICE CHARGER

The Rockford Fosgate RFC-350 is the personal charging device everyone needs. Featuring a rechargeable 9000mAh battery pack, this device charger has all the needed power for the person on the go who often finds themselves without access to a charger or wall outlet. Able to charge mobile devices via a 5V micro USB connection up to 2.1 Amps, this compact unit has all the juice you need to keep your devices running. And speaking of running, this handy unit can help you even when your vehicle no longer does because of a dead or drained battery. It stores enough power to jump start a vehicle with up to 350 amps of output capability to get you back on the road. Additionally, it also features an LED flashlight with 3 modes of operation: Solid ON, Strobe and S.O.S.

RFC-350

Input Voltage

Output Voltage

5v/1A (USB)

5v /2.1A (USB) 12v/350A

2015 BUYER’S GUIDE

USB Charging Voltage

Dimensions

5V/1A

5.4”x3.3”x1”

RFC-350

PUNCH POWERED LOADED

The PUNCH PS-8 amplified subwoofer enclosure is designed for those tight spaces where most woofer enclosures won’t fit. With its low profile design and integration capabilities, this powered woofer system provides all the bass without taking up all the space, Mounting height is only 3.3” and comes with its own wiring kit!

PS-8

AVAILABLE IN 10” AND 12” POWERED LOADED SOLUTIONS

Punch Powered Loaded enclosures are the quick and easy to install bass solution to upgrade your factory or aftermarket stereo system.

P300-12

Integrated grille included.

Speaker Size

Three different automatic turn-on modes; REM (+12V), DC Offset, and Audio Signal.

Rated Power

Signal Input

Auto Turn-On

Remote

Dimensions

P300-10

10”

300 watts RMS/ 600 watts PEAK

Low-Level (RCA) or High-Level (Speaker)

12v REM, 6V DC Offset, Audio Signal

Included Punch Level Control (PLC)

H 13.3” x W 18.38” x L 9.37”

P300-12

12”

300 watts RMS/ 600 watts PEAK

Low-Level (RCA) or High-Level (Speaker)

12v REM, 6V DC Offset, Audio Signal

Included Punch Level Control (PLC)

H 14.96” x W 20.35” x L 11.5”

150 watts RMS/ 300 watts Peak

Low-Level (RCA) or High-Level (Speaker)

12v REM, 6v DC Offset, Audio Signal

Included Punch LevelControl (PLC)

H 3.3" x W 13.9" x D 9.4"

PS-8

T3 BMW DIRECT FIT SPEAKERS BMW DIRECT FIT SPEAKERS INCLUDED Optional Mounting Bezel

The included in-line crossover is equipped with OEM connectors and either a 0dB (reference) or +3dB amplitude increase to the tweeter.

Multi-purpose connector; direct fit OEM connector or aftermarket spade terminal.

Speaker Size

Tweeter Size

RMS Power Handling

Peak Power Handling

Frequency Response

Sensitivity (1W/1M)

Sensitivity (2.83V/1M)

Mounting Depth

T3-BMW1

4”

1”

50 watts

100 watts

75Hz - 20kHz

90dB

93dB

1.14”

T3-BMW2

4”

1”

50 watts

100 watts

75Hz - 20kHz

90dB

93dB

1.25”

T3-BMW3

4”

1”

50 watts

100 watts

75Hz - 20kHz

90dB

93dB

1.66”

2015 BUYER’S GUIDE

FLEXIBLE FITMENT SYSTEM Utilizing three unique OEM frame styles creates a TRUE direct fit solution for 2004 and newer BMW vehicles.

EXAMPLE 6-SERIES

This system upgrade requires using all three frame styles to be able to replace all the factory speakers.

FRAME STYLE ONE

FRAME STYLE TWO

T3-BMW1

FRAME STYLE THREE T3-BMW2

VISIT ROCKFORDFOSGATE.COM/PRODUCTS/FITMENTGUIDE FOR: Vehicle Fitment Guide

Installation Videos

Make Model Chassis

Year

T3-BMW3

RF ACCESSORIES EXCEEDING THE STANDARD

The American Wire Gauge standard was developed to rationalize selecting wire for a particular purpose. In an electronic environment, wire size can have a significant impact on performance. Rockford Fosgate products are designed and engineered to perform at a superior level. It is only fitting that the accessories linking them together perform with the same expectation.

THE AMERICAN WIRE GAUGE STANDARD The American Wire Gauge standard specifies the exact amount of copper needed to indicate a specific wire diameter or gauge. Rockford Fosgate accessories are all designed and engineered in accordance with the AWG specification.

ANATOMY OF WIRE The construction of wire is broken out into three elements, strands, clusters and bundles. Varying these combinations will directly change the wire gauge and significantly effect the flexibility of the wire.

WIRE SIZE IMPACTS SYSTEM PERFORMANCE The smaller the wire gauge (copper content) the greater the resistance which results in a loss in power to your amplifier(s) and speaker(s), thus creating a poor performing audio system!

ROCKFORDFOSGATE.COM Donâ&#x20AC;&#x2122;t forget to use our Amp Wire Calculator to optimize output with properly sized wire. 83

2015 BUYERâ&#x20AC;&#x2122;S GUIDE

4 AWG

8 AWG

RFK1D

RFK4I

RFK8I

RFK1D - Dual Amp Kit RFK1 - Power Only Kit

RFK4D - Dual Amp Kit RFK4X - Complete Kit RFK4i - Power w/ Interconnect Kit RFK4 - Power Only Kit

RFK8X - Complete Kit RFK8i - Power w/ Interconnect Kit RFK8 - Power Only Kit

Dual Twisted Pair

Twisted Pair

Coupler

RFK10I

RFI-20

RFIS

• Available 3ft - 20ft Length • Y-Adapters

• Couplers

Battery Clamps

Fuses

Terminals

Battery Post Adapters

Fuse Holders

RFT1

RFDGM

RFFANL

• ANL Style 500-100A • MAXI Style 100-50A • AGU Style 60-30A

• Set Screw - 1/0 AWG & 4 AWG • Crimp - 1/0 AWG, 4AWG & 8 AWG • Barrier Spades - 4 AWG & 8 AWG

RFDGM - GM Battery Post Adapter RFDGML - GM Battery Post Adapter for Double Stacked Terminals

1/0 AWG

4 AWG

8 AWG

Speaker Wire

RFFANL - Inline ANL or MAXI Fuse Holder RFFAGU - Inline AGU Fuse Holder RFFMAXI - Inline MAXI Fuse Holder RFFDAGU - Fused AGU Distribution Block RFD1 - 1/0 AWG Distribution Block RFD4 - 4 AWG Distribution Block

RFW4R

RFW1R-51

RFW4B

• Red or Black • 100ft Spool

Hybrid

Electrolytic

RFWP12

• 12 AWG, 16 AWG, 18 AWG • 250/1000 ft Spool or Packaged

• Red or Black • 250ft Spool Deadskin

Powerall

RFC10HB

RFC10HB - 10 Farad Hybrid Digital Capacitor RFC2D - 2 Farad Hybrid Digital Capacitor

RFC1

RFC1D - 1 Farad Digital Capacitor RFC1 - 1 Farad Capacitor

RFDS

RFDS - Sound Damping Material 20’ square feet

RFC350

POWERALL RFC-350 - Portable Charger/Car Jumper Cables

FOR ADDITIONAL INFORMATION ON ACCESSORIES, PLEASE VISIT ROCKFORDFOSGATE.COM

CAPACITORS / DEADSKIN

• Red or Black • 51ft Spool

RFW8B

POWER WIRE

RFFU30

RFDB1 - 1/0 AWG +/Battery Clamp

DISTRIBUTION

• Available 3ft - 20ft Length • Y-Adapters

RFDB1

RFK10i - Power w/ Interconnect Kit RFK10 - Power Only Kit

INTERCONNECTS

RFIT-20

10 AWG

POWER KITS

1/0 AWG

AMPLIFIERS SUBWOOFERS SPEAKERS SOURCE UNITS

Rockford’s element ready product line takes into account the effects of the environment and takes measures to ensure lasting performance.

Alternate

2015 BUYER’S GUIDE

Dust – We make sure that displays and motor structures are sealed up tight so they look as clear as possible and perform day in and day out no matter how many times you hit the trails.

Water Tested – IPX5 and IPX6 Ratings allow for the components to be directly sprayed with water without water incursion.

UV Inhibitor Materials – Centrex and ASA plastic materials are used for their UV radiation resistance and components are tested in accordance with ASTM D4329 testing and certification procedures.

Corrosion Protection (Speakers) – Components are tested for salt spray corrosion resistance and conform to ASTM B117 certification.

Thermal Shock Tested – Products are tested for extreme temperature operation as well as severe fluctuations in ambient temperature. Components are taken to both low and high temperature extremes and then tested to ensure operational capabilities.

Corrosion Protection (Electronics) – Two part epoxy coated PCB boards prevent corrosion of critical components due to exposure in moisture rich environments.

Stainless Hardware – Stainless hardware is used due to its natural resistance to corrosion and rusting. This ensures that electrical connections will not degrade over time due to exposure to the elements.

Vibration – Knowing our equipment will not be sitting still, we subject it to full vibration and shock testing to ensure that it will take abuse and keep performing to our stringent standards.

SUBWOOFERS/SPEAKERS

SUBWOOFERS/SPEAKERS Rockford knows that when you shop for speakers for your boat, UTV or motorcycle, you are looking for something that is not only going to sound amazing but stand up to the elements. We specify high grade UV resistant materials for our speaker housings and grilles and make sure that they meet ASTM testing standards. We also subject them to salt spray (fog) testing to make sure that exposure to the environment will not cause issues with corrosion, both from a hardware or electrical connection standpoint.

AMPLIFIERS

AMPLIFIERS Our Moto-marine amplifiers have not only the capabilities you expect a Rockford amp to have, but we have designed them to stand up to the environmental conditions you are likely to subject them to. With corrosion resistant stainless steel hardware and two-part epoxy coated circuit boards, these units are designed with you in mind. Whether on the lake, on the road or in the back woods these amplifiers are ready for an adventure.

SOURCE UNITS

SOURCE UNITS Rockfordâ&#x20AC;&#x2122;s PMX series of source units and remotes are fully tested against UV radiation degradation as well as tested to IPX water intrusion standards. We also fully test the units for ever changing environmental conditions such as temperature extremes, as well as vibration testing to make sure they can take a bump and keep performing like a Rockord product should.

AMPLIFIERS

UNPRECEDENTED POWER AND CONTROL

dB/OCT

CROSSOVER SLOPE

YEAR

OHMS

YEAR

2 1 2/1 LIMITED WARRANTY

FREE* EXTENDED WARRANTY

IMPEDANCE STABILITY

HISTORY OF PERFORMANCE

dB/OCT

CROSSOVER SLOPE

YEAR

OHMS

YEAR

1 1 4/2 LIMITED WARRANTY

FREE* EXTENDED WARRANTY

IMPEDANCE STABILITY

THE PERFECT FIRST STEP

LIMITED WARRANTY

OHMS

YEAR

dB/OCT

12 1 4/2

CROSSOVER SLOPE

IMPEDANCE STABILITY

*WITH QUALIFYING ROCKFORD FOSGATE INSTALLATION KIT PURCHASE

WHEN SIZE, POWER AND THE ELEMENTS ARE A CONCERN THESE AMPLIFIERS HAVE YOU COVERED Knowing your life isn’t restricted to just the highways and byways, Rockford Fosgate introduces their new series of Element Ready small chassis Power amplifiers. Building on the successful launch of the Mobile audio version of these amplifiers last year and seeing how many of our customers were also using them in their motorcycles, UTVs and boat systems, the Rockford Engineers wanted to create a version that was geared more toward a life in the elements.

MODELS SHOWN | TM500X1br, TM400X2ad

2015 BUYER’S GUIDE

Our new Element Ready series of Power amplifiers have all the same benefits and features of their Mobile counterparts, but we’ve also added additional protective components knowing these are not likely to be safe in the trunk of your car. With features like a brushed aluminum chassis with UV inhibitors added to the finish to a Marine grade two-part epoxy coating on the circuit boards, these small chassis powerhouses will let you continue enjoying your tunes while hitting the trails or cruising the lake with friends.

SAME GREAT PUNCH AMPLIFIERS IN AN ELEMENT READY PACKAGE Punch is a name that has been synonymous with car audio for over 35 years. The mobile audio enthusiast in most cases is well versed in the quality and history of the Punch family of products. When we redesigned the mobile amplifier line in 2013 we knew that this new breed of Punch products would far surpass anything we had built previously. By integrating new circuit designs and developing our C.L.E.A.N. setup technology our engineers have created an amplifier family with capabilities not seen before. With the expansion of our Moto/Marine category this year, we wanted to offer that same amplifier offering, but in an

MODELS SHOWN | PM1000X1bd, PM400X4, PM300X2, PM1000X5

Element Ready chassis. This new breed of Punch amplifier has all the amazing features as the mobile version but also now incorporates some of the necessary elements to help it withstand the off-road and on the water conditions. Featuring a brushed aluminum finish with UV inhibitors, a two-part epoxy coated circuit board and marine grade stainless steel hardware, these amplifiers are designed to give you all the performance you expect with the peace of mind that they will stand the test of time.

PRIMED TO HIT THE ROAD, TRAILS OR LAKE AND DELIVER THE TUNES Incorporating many of the technology elements that Rockford is known for, our Prime series of Element Ready amplifiers are an ideal choice if you are trying to build a system on a budget. With our high efficiency circuit design, these amplifiers are ideal for vehicles with limited electrical systems. They can easily exceed their power ratings giving you every watt you deserve and then some.

MODELS SHOWN | M1200-1D, M400-4D, M600X5

2015 BUYERâ&#x20AC;&#x2122;S GUIDE

Built with a powder coated cast aluminum heat sink with integrated UV inhibitors and two part epoxy coated circuit boards, these amplifiers have been fully tested for all kinds of environmental conditions. Along with incorporating features such as variable crossovers and our famous Punch EQ circuit further completes the package making the Prime amplifiers a perfect choice for your system.

TH E G UT S OF AN AMPLIFIER

Organizing the combination of parts that make up the guts of an amplifier tremendously impacts its performance capabilities. A change in topology type matched with a variation of power supply components deliver a higher power output and enhanced audio quality. Rockfordâ&#x20AC;&#x2122;s proprietary amplifier topologies and electrical technologies in our amplifier lineup will drive your system to new heights.

HEAT SINK MOSFETS

CONFORMAL COATED CIRCUIT BOARD

MARINE GRADE STAINLESS STEEL TERMINALS

POWER SUPPLY

RCA

MOSFETs - A type of transistor used to amplify audio signal (music). Youâ&#x20AC;&#x2122;ll see more of these guys lined up as wattage demands increase.

Conformal Coated Circuit Board Sometimes referred to as the PCB, is used to connect this-to-that through tiny lines of copper across multiple layers of pathways.

Power Supply - A.K.A. the transformer, as the name suggest it takes the incoming voltage and converts it to a useable voltage for speakers.

Marine Grade Nickel Plated Terminals These are the connection points for the speakers or subwoofers and the power source (battery) for the amplifier.

RCA - These are the connection points for the audio signal (music) coming from the audio source (radio). RCA connectors are most commonly used.

BESt

GOOD

MATERIAL HIErARCHY

Heat Sink - This heavy outer shell protects the parts inside by transferring away the heat made reproducing an audio signal (music).

500WATTS

400WATTS

400WATTS 4.3”

Extruded Aluminum w/ UV Inhibitors Molex; Marine Grade Nickel Plated Set-Screw or Pigtail

8.3”

Balanced Differential; High-Level Capable with Auto Turn -On

1.6”

TO-220 MOSFETs w/MEHSA™ Ferrite Core Coated/Booted Transformer • Our small footprint design makes these an ideal choice when space is a concern such as on a motorcycle or UTV. • Active heat management and forced air cooling ensures these amplifiers will deliver the power all day long.

4 Layer 2oz. Copper Circuit Board w/2-Part Epoxy Coating *TM400X4ad MODEL SHOWN

300WATTS 500WATTS 1000WATTS

300WATTS 400WATTS 500WATTS

400WATTS 600WATTS

1000WATTS

7.8”

Die-Cast Aluminum w/DTM™ and UV Inhibitors Marine Grade Nickel Plated C-Clamp compression 2.4”

Balanced Differential; High-Level Capable with Auto Turn-On TO-220 MOSFETs w/MEHSA™ Ferrite Core Coated/Booted Transformer 4 Layer 2oz. Copper Circuit Board w/2-Part Epoxy Coating *PM1000X1bd MODEL SHOWN

13.3”

• Using a marine grade two part epoxy coating on the circuit boards, we ensure that these amplifiers will continue to function without concern of corrosion or rust buildup. • Marine grade stainless steel hardware is used for all electrical connections making sure that they remain corrosion free so your music will sound good no matter what environment your in.

750WATTS 1200WATTS

600WATTS

6.8”

Die-Cast Aluminum w/DTM™ and UV Inhibitors Marine Grade Nickel Plated Set-Screw Balanced Differential; High-Level Capable

2”

TO-220 Bipolar Transistors 9.1” • Designed with efficiency in mind, the Element Ready Prime amplifier family produces high output power without excessively taxing your electrical system. • With a powder coated cast aluminum heat sink, epoxy coated circuit boards and stainless steel hardware these amplifiers are ready to hit the trails or the lake any time.

Ferrite Core Transformer 2 Layer 2oz. Copper Circuit Board w/2-Part Epoxy Coating *M750-1D MODEL SHOWN

400WATTS 600WATTS 6.8”

Die-Cast Aluminum w/DTM™ and UV Inhibitors Marine Grade Nickel Plated Set-Screw 2”

Balanced Differential

11.1”

TO-220 MOSFETs Ferrite CoreTransformer

• Our ultra-efficient 4-channel amplifier design uses the latest full range Class D technology to provide crisp clear sounds without taxing the electrical system. • Amplifiers are optimized for multi-channel systems layouts from simple to complex and are stable to 2 ohms per channel.

2 Layer 2oz. Copper Circuit Board w/2-Part Epoxy Coating *M600-4D MODEL SHOWN

Topology

Circuit Board 4 layer 2 oz. copper circuit board

>50dB

H 2.4” x W 7.8” x L 9.9” (Mini chassis)

TRANS•ana

4 layer 2 oz. copper circuit board

>105dB

>50dB

H 2.4” x W 7.8” x L 9.9” (Mini chassis)

150mV - 12V

>105dB

>50dB

H 2.4” x W 7.8” x L 9.9” (Mini chassis)

<1.0%

150mV - 12V

>105dB

>50dB

H 2.4” x W 7.8” x L 9.9” (Mini chassis)

20Hz - 20kHz

<1.0%

150mV - 12V

>105dB

>50dB

H 2.4” x W 7.8” x L 9.9” (Mini chassis)

75x4 + 200x1 @ 4 ohms 125x4 + 400x1 @ 2 ohms N/A + 500x1 @ 1 ohm

20Hz - 20kHz

<1.0%

150mV - 12V

>105dB

>50dB

H 2.4” x W 7.8” x L 9.9” (Mini chassis)

TRANS•ana & Class bd

PM300X1

200x1 @ 4 ohms 300x1 @ 2 ohms

20Hz - 20kHz

<1.0%

150mV - 12V

>105dB

N/A

H 2.4” x W 7.8” x L 9.9” (Mini chassis)

TRANS•ana

PM500X1bd

150x1 @ 4 ohms 300x1 @ 2 ohms 500x1 @ 1 ohm

20Hz - 250Hz

<1.0%

150mV - 12V

>100dB

N/A

H 2.4” x W 7.8” x L 9.9” (Mini chassis)

Class bd

PM1000X1bd

250x1 @ 4 ohms 500x1 @ 2 ohms 1000x1 @ 1 ohm

20Hz - 250Hz

<1.0%

150mV - 12V

>100dB

N/A

H 2.4” x W 7.8” x L 9.9” (Mini chassis)

M400-4D

75x4 @ 4 ohms 100x4 @ 2 ohms 200x2 @ 4 ohms bridged

20Hz - 20kHz

<0.1%

150mV - 4V

>90dB

>50dB

H 2.0” x W 6.8” x L 9.1”

M600-4D

100x4 @ 4 ohms 150x4 @ 2 ohms 300x2 @ 4 ohms bridged

20Hz - 20kHz

<0.1%

150mV - 4V

>90dB

>50dB

H 2.0” x W 6.8” x L 11.1”

50x4 + 200x1 @ 4 ohms 75x4 + 300x1 @ 2 ohms 150x2 + N/A @ 4 ohms bridged

20Hz - 20kHz

<1.0%

150mV - 12V

>100dB

>50dB

250x1 @ 4 ohms 500x1 @ 2 ohms 750x1 @ 1 ohm

20Hz - 250Hz

<1.0%

150mV - 4V

>100dB

M750-1D

400x1 @ 4 ohms 800x1 @ 2 ohms 1200x1 @ 1 ohm

20Hz - 250Hz

<1.0%

150mV - 4V

>100dB

M1200-1D

Channel Separation

Class br

S/N Ratio

H 1.6” x W 4.3” x L8.3” (Compact chassis)

Input Sensitivity

4 layer 2 oz. copper circuit board

THD+N @ Rated Power

Class ad w/ Constant Power

Frequency Response

H 1.6” x W 4.3” x L7” (Compact chassis)

Rated Power

Dimensions

[ AMPLIFIER SPECIFICATIONS [

TM400X2ad

200x2 @ 4 ohms 200x2 @ 2 ohms 400x1 @ 4 ohms bridged

20Hz - 20kHz

<1.0%

150mV - 12V

>110dB

>60dB

TM400X4ad

100x4 @ 4 ohms 100x4 @ 2 ohms 200x2 @ 4 ohms bridged

20Hz - 20kHz

<1.0%

150mV - 12V

>110dB

>60dB

H 1.6” x W 4.3” x L8.3” (Compact chassis)

TM500X1br

175x1 @ 4 ohms 300x1 @ 2 ohms 500x1 @ 1 ohm

20Hz - 20kHz

<1.0%

150mV - 12V

>110dB

N/A

PM300X2

100x2 @ 4 ohms 150x2 @ 2 ohms 300x1 @ 4 ohms bridged

20Hz - 20kHz

<1.0%

150mV - 12V

>105dB

PM400X2

125x2 @ 4 ohms 200x2 @ 2 ohms 400x1 @ 4 ohms bridged

20Hz - 20kHz

<1.0%

150mV - 12V

PM500X2

150x2 @ 4 ohms 250x2 @ 2 ohms 500x1 @ 4 ohms bridged

20Hz - 20kHz

<1.0%

PM400X4

50x4 @ 4 ohms 100x4 @ 2 ohms 200x2 @ 4 ohms bridged

20Hz - 20kHz

PM600X4

75 x 4 @ 4 ohms 150 x 4 @ 2 ohms 300 x 2 @ 4-Ohm Bridged

PM1000x5

M600X5

2015 BUYER’S GUIDE

Full Range Class d

4 layer 2 oz. copper circuit board

H 2.0” x W 6.8” x L 13.2”

Class ab & Class d

Single layer 2 oz. copper circuit board

N/A

H 2.0” x W 6.8” x L 9.1”

Class d

4 layer 2 oz. copper circuit board

N/A

H 2.0” x W 6.8” x L 11.1”

12 dB/oct - variable High or Low Pass and All Pass

2 ohm stereo / 4 ohm mono rated

NOMAD circuit • Reverse Polarity • Short Circuit • Thermal • Low Impedance • Under/Over Voltage

Focused mass die-cast heatsink / DTM™- Dynamic Thermal Management / MEHSA™- Maximum Efficiency HeatSink Application

Additional Features

1 ohm mono rated

Speaker Terminals

12 dB/oct - variable Low Pass

Dual fan forced induction cooling

Power Terminals

Protection NOMAD circuit • Reverse Polarity • Short Circuit • Thermal • Low Impedance • Under/Over Voltage

RCA Inputs

Impedance Stability 2 ohm stereo / 4 ohm mono rated

Heatsink Design

Variable Crossover 12 dB/oct - variable High or Low Pass and All Pass

High level capable with auto turn-on balanced differential RCA inputs

8 Ga. Quick Connect terminal

16 Ga. 4-pin Molex connector

Punch EQ variable from 0dB to +18dB @ 45Hz and/or 0dB to +14dB @ 12.5KHz with optional Punch Level Control(PLC2)

High level capable with auto turn-on balanced differential RCA inputs and RCA pass thru

4 Ga. c-clamp compression connector

10 Ga. nickel plated Quick Connect

Punch EQ variable from 0dB to +18dB @ 45Hz with optional Punch Level Control(PLC2)

8 Ga. c-clamp compression connector

Punch EQ variable from 0dB to +18dB @ 45Hz and/or 0dB to +14dB @ 12.5KHz with optional Punch Level Control(PLC2)

2 ohm stereo / 1 ohm mono rated

High level capable with auto turn-on balanced differential RCA inputs

2 ohm mono rated

High level capable with auto turn-on balanced differential RCA inputs and RCA pass thru

12 dB/oct - variable Low Pass

1 ohm mono rated

Punch EQ variable from 0dB to +18dB @ 45Hz with optional Punch Level Control(PLC2)

12 dB/oct - variable High or Low Pass and All Pass

2 ohm stereo / 4 ohm mono rated

• Short Circuit • Thermal

Focused mass die-cast heatsink

RCA input and RCA pass thru

4 Ga. set-screw connector

10 Ga. set-screw connector

Punch EQ variable from 0dB to +18dB @ 45Hz

12 dB/oct - variable High or Low Pass and All Pass

2 ohm stereo / 4 ohm mono rated(Front/Rear) and 2 ohm mono rated(Sub)

• Short Circuit • Thermal

Focused mass die-cast heatsink

RCA input or speaker level pigtailed Molex connector input

4 Ga. set-screw connector

10 Ga. set-screw connector

Punch EQ selectable from 0dB/+6dB/+12dB @ 45Hz(Front/Rear) and Variable from 0dB to +12dB @ 45Hz(Sub)

12 dB/oct - variable Low Pass 12 dB/oct - variable infrasonic

1 ohm mono rated

• Short Circuit • Thermal

Focused mass die-cast heatsink

RCA input and RCA pass thru

4 Ga. set-screw connector

10 Ga. set-screw connector

Punch EQ variable from 0dB to +18dB @ 45Hz and included Punch Level Control(PLC)

ROCKFORDFOSGATE.COM Don’t forget to use our Woofer Wiring Wizard to properly wire woofers to your amplifier or our Woofer Box Advisor for optimized enclosure bass performance.

SUBWOOFERS

HISTORY OF PERFORMANCE

YEAR

WATTS

300 ” 1 2 24

UP TO RMS POWER HANDLING

LIMITED WARRANTY

M M

VOICE COIL

XMAX PEAK TO PEAK

THE PERFECT FIRST STEP

YEAR

WATTS

200 ” 1 2 14 LIMITED WARRANTY

M M

UP TO RMS POWER HANDLING

VOICE COIL

XMAX PEAK TO PEAK

TURN YOUR BOAT INTO A “BOOMER” WITH THESE PUNCH ELEMENT READY WOOFERS Music without the low end is like eating a PB & J without the J. It’s just not the same and doesn’t feel complete. If you enjoy the full, rich sound of your audio system in your car, then why would you accept less in your boat or UTV system? This is where the Punch Family of Moto/Marine subwoofers come in. If you’ve had or heard our mobile line of Punch subs then you know that they have the capabilities of laying down the bass line and shaking the rust loose from any ride.

without again. These versatile woofers are designed to work in sealed, ported and infinite baffle applications and are built to withstand the environment. Using UV resistant materials in the cone, surround and basket assemblies ensure that they will stand up under the summer sun and our sealed motor structure with stainless steel hardware prevent any moisture intrusion or corrosion from occurring making sure the bass hits hard every time. We even offer them in a Sport or Luxury grill version to better fit the aesthetics of any boat or UTV design.

101

2015 BUYER’S GUIDE

S P ORT GRILLE

MODELS SHOWN | PM212S4X, PM212S4B, PM210S4

LUXURY GRILLE

With our Element Ready versions you are now able to take that bass with you on the lake or on the trail and never go

OPTIONAL COLOR

WHETHER OFF-ROAD OR ON THE WATER, PRIME ELEMENT READY WOOFERS HAVE YOUR BOTTOM LINE COVERED Always looking to offer our customers choices, we introduced our Prime series of Element Ready woofers. These woofers are built using many of the same technologies as our Punch woofers but with the customer who may not be looking the Punch level sound in mind. If you want the Rockford experience without breaking the bank then these woofers will deliver.

MODELS SHOWN | RM110D4B, RM112D4, RM18D4

Using ASA injection molded plastics for the baskets and grills, polypropylene cones and SantopreneTM surrounds all with integrated UV inhibitors ensures that these woofers will not break down over time due to exposure to the elements. Available in a variety of sizes and voice coil configurations, youâ&#x20AC;&#x2122;re sure to find one that will fit the application you need.

a n ato m y OF A SUBWOOFER

Variations in the anatomy of a subwoofer dramatically changes its performance characteristics. An increase in voicecoil size coupled with a stronger cone material yields a higher power handling and increased output. By combining quality materials with Rockford’s proprietary acoustic technologies, our subwoofer lineup is sure to meet your system’s demands.

SURROUND BASKET

CONE

SPIDER VOICE COIL MAGNET

MATERIAL HIErARCHY

BESt

GOOD

103

2015 BUYER’S GUIDE

Basket - Also referred to as the frame or chassis, this is the skeletal system of the speaker. Here to keep everything in its place.

Spider - Second part of the speakers suspension, connects the cone and voice coil to the basket and controls the travel of the cone assembly.

Cone - A.K.A. the diaphragm, this is the voice of the speaker. Shape and material dramatically change tonality.

Voice Coil - The brains of the operation, directing the force from the magnet to push or pull based on the applied electrical signal.

Magnet - The heart of speaker, creating the force to push and pull cone assembly. Size, material, and design may differ, depending on performance goals.

SINGLE 4Ω

Mineral Filled Polypropylene Cone with UV inhibitors

High resistance to environmental conditions.

250-300

WATTS

Increased stiffness reduces distortion.

RMS POWER RANGE

Tall Profile, Santoprene™ w/ VAST™ Injection Molded Polypropylene w/ UV Inhibitors Single Nomex Blend w/ Multipoint Stitched Lead Wire 2” 4-Layer High Temp. KaptonTM w/ NomexTM collar 100% UV Stable Centrex Injection Molded Plastic Shielded Ferrite Magnet Structure *PM212S4 MODEL SHOWN

UV Stable Centrex Injection Molded Parts High Rigidity. Outstanding UV and weather resistance.

DUAL 2Ω DUAL 4Ω

UV/ Salt Fog Resistant SantopreneTM Surround Ideal For changing environmental conditions.

150-200

WATTS

Long Life Span.

RMS POWER RANGE

UV and Salt/Fog Resistant, Santoprene™ w/ VAST™ Injection Molded Carbon Fiber Filled Polypropylene w/ UV Inhibitors Single Aramid Fiber w/ Multipoint Stitched Lead Wire 1.5/2.0” 4-Layer High Temp. Aluminum w/ NomexTM collar 100% UV Stable ASA Injection Molded Plastic Moisture, Tear and Fatigue Resistant Aramid Fiber Spider High strength. Maintains flexibility w/ changing temperatures.

Ferrite Magnet Structure *RM112D4 MODEL SHOWN

Xmax (mm)

Sensitivity

RMS Power Handling (watts)

Peak Power Handling (watts)

Mounting Diameter

Mounting Depth

Speaker Displacement (cu. ft.)

Sealed Enclosure (cu. ft.)

10"

Single 4 Ω

86 dB

250

500

9.13"

5.54"

0.154

0.75

1.25 cu. Ft. Port: (1) 4" x 8.52" Infinite Baffle Compatible

PM212S4/ PM212S4B/ PM212S4X

12"

Single 4 Ω

87 db

300

600

11.25"

6.58"

0.258

1.5 cu. Ft. Port: (1)3" x 5.74" Infinite Baffle Compatible

Dual 2 Ω or 4 Ω

85 dB

150

400

9.13"

4.4"

0.06

0.75

1.4 cu ft. Port: (1) 3”x8”

RM110D2/ RM110D2B/ RM110D4/ RM110D4B

10"

Dual 2 Ω or 4 Ω

89 dB

200

500

11.25"

5.1"

0.150

1.02

1.79 cu ft. Port: (1) 4”x9.3”

RM112D2/ RM112D2B/ RM112D4/ RM112D4B

12"

Dual 2 Ω or 4 Ω

89 dB

200

500

9.13"

4.3"

0.101

0.59

1.40 cu ft. Port: (1) 4”x13”

RM18D2/ RM18D2B/ RM18D4/ RM18D4B

105

2015 BUYER’S GUIDE

Surround Material

Nominal Impedance

PM210S4/ PM210S4B/ PM210S4X

Ported Enclosure

Speaker Size

[ SUBWOOFER SPECIFICATIONS [

Tall Profile, Santoprene with VAST

UV and Salt Fog Resistant Co-Molded Santoprene Surround

Motor Structure

Terminal Connectors

Tear & fatigue resistant Nomex blend spider with multipoint stitched lead wire technique

Centrex

Shielded ferrite magnet structure with extended vented pole and bumped backplate

Proprietary gold plated compression terminal. 8 Ga.

Water draining Centrex trim ring with integrated stainless steel grill or luxury grill option

Injection Molded Polypropylene

Injection Molded Carbon Fiber Filled Polypropylene Cone Body with UV Inhibitors

1.5" 4-layer high temp. copper voice coil with aluminum former

Tear & fatigue resistant poly-cotton spider with multipoint stitched lead wire technique and spider cooling vents

100% UV Stable ASA Injection Molded Plastic

Ferrite magnet structure with extended pole piece, vented aluminum voice coil former and bumped backplate

Proprietary Corrosion Resistant Spring Loaded Push Terminals. 12 Ga.

Water draining ASA trim ring with integrated grill

2" 4-layer high temp. aluminum voice coil with spun-laced Nomex™ insulating reinforcement collar

ROCKFORDFOSGATE.COM Don’t forget to use our Woofer Wiring Wizard to properly wire woofers to your amplifier or our Woofer Box Advisor for optimized enclosure bass performance.

Trim Ring

Frame Structure

2” 4-layer high temp, aluminum voice coil with Kapton former and spun-laced Nomex insulating reinforcement collar

Spider

Cone Material Injection Molded Polypropylene

Voice Coil

Dustcap Material Injection Molded Polypropylene

SPEAKERS

150 1

WATTS

HISTORY OF PERFORMANCE

UP TO RMS POWER HANDLING

YEAR

LIMITED WARRANTY

40 - 22 Hz

kHz

FREQUENCY RESPONSE

THE PERFECT FIRST STEP

YEAR

WATTS

75 1

UP TO RMS POWER HANDLING

LIMITED WARRANTY

49 - 20 Hz

kHz

FREQUENCY RESPONSE

BE THE ENVY OF THE CAMPSITE OR THE SANDBAR WITH OUR PUNCH ELEMENT READY SPEAKERS If you’re someone who truly enjoys their music one way and that way is all the way up then you need to look at the Punch family of Moto/Marine speaker and wake tower cans. These Element Ready speakers are designed to hold up under the harshest conditions and still belt out your music just the way you like. Using many of the same construction materials found on our Marine woofers you can rest assured they will keep on rocking regardless of a little mud or water getting on them.

If you want to really crank up the party then our wake tower speaker enclosures are just the thing you need. Available with our new horn loaded or coaxially mounted component design, these cans will make you the envy of the lake or campsite.

109

2015 BUYER’S GUIDE

DOME TWEETER

OPTIONAL COLOR

S PORT GRILLE

HORN TWEETER

OPTIONAL COLOR

S PORT GRILLE

LUXURY GRILLE

S PORT GRILLE

MODELS SHOWN | PM282W, M262-WAKE, PM282HW, PM282B, PM262, PM282X

OPTIONAL COLOR

BIG THINGS TRULY DO COME IN SMALL PACKAGES. Our new Element Ready Prime series of speakers shows that you don’t have to blow your yearly budget just to get good sound out of your audio system especially when it has to live in an environment such as your boat, UTV or even your motorcycle. We’ve designed these speakers with efficiency and output in mind. Available with two different tweeter sizes and power handlings, these speakers can belt out the tunes without needing an amplifier the size of a nuclear power plant.

OPTIONAL COLOR

RM0652

RM1652

MODELS SHOWN | RM1652B, RM0652

OPTIONAL COLOR

Using UV inhibitor based materials and corrosion resistant hardware these speakers are designed with the person who lives for the outdoors in mind. So if you’re looking for a speaker that is built with the quality and to the standards the Rockford expects of all its products and will stand up to your active lifestyle then these are the speakers for you.

f r a m e wo r k OF A SPEAKER

SURROUND

CONE

TWEETER BASKET CROSSOVEr MAGNET

MATERIAL HIErARCHY

BESt

GOOD

111

2015 BUYERâ&#x20AC;&#x2122;S GUIDE

Tweeter - Composed of the same parts as an speaker, surround, cone, voice coil, basket and magnet. Just on a smaller scale.

Cone - A.K.A the diaphragm, this is the voice of the speaker. Shape and material dramatically change tonality.

Crossover - Works like a switch board, directing the audio signal through caps, filters and switches to the appropriate speaker.

Basket - Also referred to as the frame or chassis, this is the skeletal system of the speaker. Here to keep everything in their place.

Surround - Works in harmony with the spider, attached to the cone to maintain the centering of the voice coil in the magnetic gap.

Magnet - The heart of speaker, creating the force to push and pull cone assembly. Size, material, and design may differ, depending on performance goals.

2WAY 8.0”

HORN WAKE

Coaxially mounted horn loaded tweeter w/ Neodymium motor structure High Quality 6dB High pass crossovers using Metalized Polyester Film Capacitors UV & Salt-Fog resistant TPE (Thermo Plastic Elastomer) surround w/ VAST™ Injection molded mineral filled polypropylene with UV inhibitors • Our high output horn tweeter and midrange speaker assembly with their Neodymium motor structures are designed for high volume applications. • Enclosures are constructed of high density poly-ethylene, have a paint and clear coat finish with integrated UV inhibitors and are available in black or white colors (Same as PM282W wake speakers).

High Density Poly-ethylene Enclosure with UV Inhibitors Hi power Neodymium magnet structure *PM282HW MODEL SHOWN

2WAY 8.0”

WAKE

• Our 8 inch full range cans come loaded with our PM282 speakers and produce crisp and clear full range sound for those not only in the boat but out as well. • Our 8 inch cans ship with a surface mount bracket included and an optional tubular clamp is also available for wake tower mounting. • Mounting assemblies feature security Torx hardware, safety lanyards and 359 degree rotation capabilities for directional adjustments.

High Density Poly-ethylene Enclosure with UV Inhibitors Hi power Ferrite magnet structure *PM282W MODEL SHOWN

2WAY 6.0” WAKE

Bridge mounted component grade coated aluminum alloy tweeter Integrated 6/12 dB per octave sealed crossover. UV & Salt-Fog resistant TPE (ThermoPlastic Elastomer) surround w/ VAST™ Injection molded mineral filled polypropylene with UV inhibitors High Density Poly-ethylene enclosure with UV Inhibitors Hi power Ferrite magnet structure

• Our 6 inch full range wake cans use our PM262 full range speaker and are available in black or white finishes. • The 6 inch can assemblies are shipped with both a surface mount and tubular clamp assembly for versatile mounting options.

*PM262-WAKE MODEL SHOWN

2WAY 6.0” 8.0”

Bridge mounted component grade coated aluminum alloy tweeter Integrated 6/12 dB per octave sealed crossover. UV & Salt-Fog resistant TPE (ThermoPlastic Elastomer) surround w/ VAST™ Injection molded mineral filled polypropylene with UV inhibitors 100% UV stable Centrex™ injection molded plastic Linear, high excursion matched motor magnetics and suspension design *PM262 MODEL SHOWN

113

2015 BUYER’S GUIDE

• The PM2 full range speakers incorporate a 1 inch aluminum alloy component tweeter, coaxially mounted over the midrange, to produce crisp and clear full range sound for you to enjoy while relaxing on the water. • To compliment your vehicle’s interior the PM2 full range speakers are available in both a black and white sport grill and a white luxury grill option.

2WAY 6.5”

Grill Integrated Proprietary LCP Dome Tweeter High Quality 6dB High pass crossovers using Metalized Polyester Film Capacitors UV and Salt Fog Resistant Co-Molded Santoprene Surround w/ VAST™ Injection molded Carbon Fiber filled polypropylene with UV inhibitors • Our Marine RM1 full-range speakers are perfect for anyone looking to add some FANATIC sound to their vessel or side-by-side. • With our specially designed volcano dome LCP tweeter the RM1 speakers produce crystal clear highs even when rocketing across the lake or racing up the sand dunes.

100% UV stable ASA injection molded plastic Linear, high excursion matched motor magnetics and suspension design *RM1652 MODEL SHOWN

2WAY 6.5”

Grill Integrated LCP Dome Tweeter High Quality 6dB High pass crossovers using Metalized Polyester Film Capacitors UV and Salt Fog Resistant Co-Molded Santoprene Surround w/ VAST™ Injection molded Carbon Fiber filled polypropylene with UV inhibitors • Our 2-way component system with a coaxially integrated tweeter is built using stringent marine grade weather proofing technologies to ensure the speakers will perform under the harshest conditions. • Using high grade internal crossover components ensures that both the tweeter and midrange produce high quality sound and play the frequencies they are supposed to..

100% UV stable ASA injection molded plastic Linear, high excursion matched motor magnetics and suspension design *RM0652 MODEL SHOWN

Peak Power Handling (watts)

Frequency Response

Sensitivity (1W/1M)

Sensitivity (2.83V/1M)

Mounting Depth

1.0"

75 watts

150 watts

53Hz - 22kHz

88 dB

91 dB

2.8"

PM282/ PM282B/ PM282X

1.0"

100 watts

200 watts

48Hz - 22kHz

90 dB

93 dB

3.4"

RM0652/ RM0652B

6.5"

.5"

50 watts

100 watts

52Hz - 20kHZ

88 dB

91 dB

2.5"

RM1652/ RM1652B

6.5"

1.0"

75 watts

150 watts

49Hz - 20kHz

89 dB

92dB

2.5"

Spider

RMS Power Handling (watts)

Cone Material

Tweeter Size

PM262/ PM262B/ PM262X

Surround Material

Speaker Size

[ SPEAKER SPECIFICATIONS [

UV & Salt-Fog resistant TPE (Thermo-Plastic Elastomer) Santoprene surround

Injection molded mineral filled polypropylene cone body with UV inhibitors

Moisture, tear and fatigue resistant aramid fiber spider

UV and Salt Fog Resistant Santoprene Surround

Injection molded mineral filled polypropylene cone body with UV inhibitors

Moisture, Tear and Fatigue Resistant Aramid Fiber Spider

115

2015 BUYER’S GUIDE

Dimensions (HxWxD)

WAKE CANS

Peak Power Handling (watts)

M262-WAKE/ M262B-WAKE

RMS Power Handling (watts)

PM282HW/ PM282HW-B HORN WAKE CANS

Nominal Impedance

PM282W/ PM282W-B WAKE CANS

Speaker Size

[ WAKE SPEAKER SPECIFICATIONS [

8" woofer/ 1" Aluminum Tweeter

4Ω

100 watts

200 watts

14.2" x 9.1" x 10.09"

8" woofer/ 1" Horn Tweeter

4Ω

150 watts

300 watts

14.2" x 9.1" x 10.09"

6" woofer/ 1" Aluminum Tweeter

4Ω

75 watts

150 watts

10.96" x 7.03" x 11.26"

Terminal Connectors

Crossover

Motor Structure Linear, high excursion matched motor magnetics and suspension design

1” (25mm) bridge mounted component grade coated aluminum alloy tweeter

Integrated 6/12 dB per octave sealed crossover.

Corrosion resistant gold plated polarized input terminals

100% UV Stable ASA Injection Molded Plastic Parts

Linear, high excursion matched motor magnetics and suspension design

Grill Integrated 1" Proprietary LCP Dome Tweeter

High Quality 6dB High pass crossovers using Metalized Polyester Film Capacitors

Proprietary Corrossion Resistant Spring Loaded Push Terminals

Tweeter

Frame Structure UV stable Centrex™ 814 injection molded plastic parts

Grill Integrated 0.5” LCP Dome Tweeter

ROCKFORDFOSGATE.COM Don’t forget to use our Woofer Wiring Wizard to properly wire woofers to your amplifier or our Woofer Box Advisor for optimized enclosure bass performance.

SOURCE UNITS

DESIGNED AND ENGINEERED WITH A PURPOSE AND YOU IN MIND Rockford has long recognized a person’s desire to easily connect with their music. With that in mind we set out to create a purpose built line of Moto/ Marine source units equipped with all the latest technology and features. In looking at the market, we saw that many of the source units being used in Moto/Marine applications were simply repurposed mobile audio units and know that they were not originally designed to be in a boat, UTV or motorcycle environment. This is why Rockford decided to take the ground up approach in designing this new source unit line.

MODELS SHOWN | PMX-1R, PMX-5, PMX-2, PMX-8DH, PMX-0R

119

2015 BUYER’S GUIDE

From a hardware standpoint we talked to both industry professionals and the consumers who use these products to determine what worked and more importantly what didn’t. From this we designed several units with varying capabilities to suit the needs of our customers from a simple streaming receiver to a hide-away control box with remote display. We also designed the software and menu system from the ground up making the menus easy to use and access. The last thing you want is to be shooting down the trail fumbling through a complex menu system. If you are looking for a high quality source unit with a purpose specific design to be the heart of your system then look no further.

DNA

OF A SOURCE UNIT A source unit is the heart of any good sound system and flexibility, features and ease of operation of are often at the top of the list of any customer when it comes time to decide on which one to use. Rockford has designed their new Marine grade source units from the ground up with user friendly menu designs, input and output flexibility as well as multi-zone/ multi-source controllability.

EQUALIZATION

ZONE/SOURCE CONTROL

DISPLAY

MEMORY

INPUT SIGNAL

MATERIAL HIErARCHY

BESt

GOOD

121

2015 BUYERâ&#x20AC;&#x2122;S GUIDE

MOUNTING SYSTEM DEPTH

DISPLAY - The display is how you receive information from the unit and see the settings for the internal menus. It can also display signal and song information if available.

ZONE/ SOURCE CONTROL - A unit with multi-Zone/ Source control provides for more flexibility in system designs by creating different zones of the system and allowing different sources to be played in them.

INPUT SIGNAL - The number and types of input signals a source unit can accept help determine its flexibility in a system design and help you determine if it will fit your needs.

EQUALIZATION - The equalizer allows you to tune the system to your taste via a multi-band EQ or our own proprietary Punch EQ circuit.

MEMORY - The internal circuit that retains all settings and stations when power is no longer applied to the unit.

MOUNTING SYSTEM - The system by which the unit mounts into the vehicle and depth of the chassis helps to determine where you can mount the unit.

Full Function Wired Display Head 5"

5” Ultrabright Color TFT Display, IPX6 Certified Faceplate, Optical Wet Bonded N/A N/A N/A N/A Thru-hole surface mount, Rear bolt thru mounting plate/ .625” mounting depth

*PMX-8DH MODEL SHOWN

• This full function display head is specifically designed for use with our PMX-8BB and allows total access to all its functions and features. • Its large 5 inch display makes it easy to see what’s on as well as navigate the custom menus.

Hide-Away Digital Media Receiver 5"

N/A Bluetooth, SiriusXM, Pandora, iPod iPhone, Dual USB, Aux, A/V, AM/FM/WB EEprom memory with zero current draw on power down Nitrile Rubber 4-Zone/ 2-Source 7 Band Equalization + PEQ2 Surface mount/ Hideaway Black Box w/2.2” height

PMX-8BB MODEL SHOWN

• When joined with the PMX-8DH this hide-away black box unit is a feature rich command center for your entire audio system. • Whether installing a small system or a complex multi zone system, this unit has the features and functionality you’re looking for.

2.7” Full Color TFT Display IPX6 Certified Faceplate, Optical Wet Bonded

Digital Media Receiver With Oversized Display

Bluetooth, SiriusXM, Pandora, iPod iPhone, Dual USB, Aux, A/V, AM/FM/WB EEprom memory with zero current draw on power down 2-Zone/ 2-Source 7 Band Equalization + PEQ2 Thru-hole surface mount, Rear bolt thru mounting plate/ 7.25” mounting depth *PMX-5 MODEL SHOWN

• With its oversized display and single DIN chassis this multimedia receiver is designed for ease of use with a built from the ground up GUI and menu system. • If a true multi zone/ multi source capable source unit is what you’re looking for then this unit has you covered.

Compact Digital Media Receiver 5"

2.7” Full Color TFT Display IPX6 Certified Faceplate, Optical Wet Bonded Bluetooth, Pandora, iPod/iPhone, USB, Aux, AM/FM/WB EEprom memory with zero current draw on power down 2-Zone/ 1-Source 7 Band Equalization + PEQ2 Thru-hole surface mount, Rear bolt thru mounting plate, Gauge style C-Clamp/ 3” mounting depth

*PMX-2 MODEL SHOWN

• This compact receiver is perfect when you need the functionality of a multimedia unit without the size typically associated with them. • Its multiple mounting options allow for versatility wherever you need to install it.

123

2015 BUYER’S GUIDE

Ultra Compact Digital Media Receiver 5"

N/A Bluetooth, USB, Aux N/A 2-Zone/ 1-Source N/A Thru-hole surface mount, Rear bolt thru mounting plate, Gauge style C-Clamp/ 3” mounting depth

*PMX-0 MODEL SHOWN

• This compact streaming audio receiver is ideal if you typically play music via your Bluetooth enabled device. • Its small size and mounting footprint make it ideal when real estate is tight.

Full Function Wired Remote 5"

2.7” Full Color TFT Display IPX6 Certified Faceplate, Optical Wet Bonded N/A N/A Multi-Zone/Source control via source unit N/A Thru-hole surface mount, Rear bolt thru mounting plate, Gauge style C-Clamp/ 3” mounting depth

*PMX-1R MODEL SHOWN

• This full function remote control is designed to give you access to all the same controls and settings you get on the primary receiver units. • Up to three remote units can be connected to and are designed to work with the PMX-8BB, PMX-5 and PMX-2 units.

Wired Remote 5"

N/A N/A N/A N/A N/A Thru-hole surface mount, Rear bolt thru mounting plate/ 7.25” mounting depth

*PMX-0R MODEL SHOWN

• When a compact remote unit is needed for simple control of your multimedia receiver units, the PMX-0R is ideal. • Up to three remote units can be connected to and are designed to work with the PMX-8BB, PMX-5 and PMX-2 units.

125

2015 BUYER’S GUIDE

SOURCE UNIT SPECIFICATIONS

Description

Features

Dimensions

Full Function Wired Display Head w/ 5” Hi-Res Color Display

Illuminated Waterproof Rotary Encoder Volume Control, Front Panel Sub Control, Front Panel Illumination Control, Ultra Slim Design, Tactile Inverted and Extraverted Buttons for Easy Identification, IPX6 Certification, Back Lit LED Button Illumination

H 4.63” x W 8.00”

Hide-away box Digital Media Receiver for PMX-8DH 50 watts x 4

Global AM/FM/WB Tuner, SiriusXM Ready, Full iOS/Andriod, Made for iPod, Dual USB Input w/ Video Playback, BLUETOOTH avrcp 1.5, 2-Source Zone Control, 4-Zone Volume Control, 6 Channel F/R/S 4V Zone 1&2 Preouts, 2 Channel Zone 3&4 4V Preouts, 7-Band Graphic Equalizer, Punch EQ, A/V Input, Video Output, CAN Ready, Remote Control Ready, EEPROM NonVolatile Memory,Wired Illumination Control, Steering Wheel Control Ready

H 2.20” x W 8.24” x D 6.86”

Digital Media Receiver w/ 2.7” Full-color Display 50 watts x 4

Global AM/FM/WB Tuner, SiriusXM Ready, Full iOS/Andriod, Made for iPod, USB Input, BLUETOOTH avrcp 1.4, 2-Source Zone Control, 6 Channel F/R/S 2V Zone 1 Preouts, 2 Channel Zone 2V Preouts, 7-Band Graphic Equalizer, Punch EQ, CAN Ready, Remote Control Ready, EEPROM Non-Volatile Memory, Front Panel Sub Control, Front Panel & Wired Illumination Control, Illuminated Waterproof Rotary Encoder Volume Control, IPX6 Front Panel Certification, Back Lit LED Button Illumination, Steering Wheel Control Ready

DIN size chassis w/ 1.75 DIN face H 3.50” x W 8.00”

Compact Digital Media Receiver w/ 2.7” Full-color Display 50 watts x 4

Global AM/FM/WB Tuner, Full iOS/Andriod, Made for iPod, USB Input, BLUETOOTH avrcp 1.4, 4 Channel (Front and selectable Rear/Sub Channel) 2V Preouts, 7-Band Graphic Equalizer, Punch EQ, CAN Ready, Remote Control Ready, EEPROM NonVolatile Memory, Front Panel Sub Control, Front Panel & Wired Illumination Control, Waterproof Rotary Encoder Volume Control, IPX6 Front Panel Certification, Back Lit LED Button Illumination

H 3.95” x W 4.33”

Ultra Compact Digital Media Receiver

AUX Input, BLUETOOTH avrcp 1.4, 4 Channel (Front and selectable Rear/Sub Channel) 2V Preouts, Front Panel Sub Control, Front Panel Illumination Control, Waterproof Rotary Encoder Volume Control, IPX6 Front Panel Certification, Back Lit LED Button Illumination

H 2.25” x W 4.00”

PMX-1R

Full Function Wired Remote w/ 2.7” Full-color Display for PMX-8BB, PMX-5, PMX-2

Multi Zone Control (PMX-5 & PMX8), Front Panel Sub Control, Waterproof Rotary Encoder Volume Control, Front Panel Illumination Control, IPX6 Front Panel Certification, Back Lit LED Button Illumination

H 3.95” x W 4.33”

PMX-0R

Wired Remote for PMX-8BB, PMX-5, PMX-2

Front Panel Sub Control, Waterproof Rotary Encoder Volume Control, Front Panel Illumination Control, IPX6 Front Panel Certification, Back lit LED Button Illumination

H 2.25” x W 4.00”

PMX-8DH

PMX-8BB

PMX-5

PMX-2

PMX-0

COMPLETE AUDIO KITS INSTALLATION KITS SPEAKER ADAPTERS

140 2-CH SYSTEM

[ R1-HD2-9813 ]

(1) 140 Watt 2-Channel Amplifier

COMPLETE AUDIO KIT

With 2 speakers, mounting plate and wiring harness.

160 4-CH SYSTEM

[ R1-HD4-9813 ]

(1) 160 Watt 4-Channel Amplifier

COMPLETE AUDIO KIT

With 4 speakers, mounting plate and wiring harness

129

2015 BUYERâ&#x20AC;&#x2122;S GUIDE

RF ACCESSORIES RFKHD9813

• The RFKHD9813 amplifier installation kit works with both the Power small chassis and PUNCH PBR series amplifiers. • The aluminum mounting plate adds additional thermal mass to the amplifier’s heat sink to improve performance and power output. • This complete installation kit includes an amplifier mounting plate and hardware, pre-terminated power and ground wires and pre-terminated speaker wires.

*TM400X4ad Shown

*PBR300X4 Shown

FITS HARLEY - DAVIDSON® MODELS Ultra Classic® Electa Glide®

Street Glide®

1998 Tri Glide®

2013 Road Glide®

Road Glide Ultra®

AMPLIFIER/SPEAKER INSTALLATION KIT

MOUNTING PLATE AND WIRING HARNESS

3 RECOMENDED 4-CH SYSTEM PBR300X4

(4) Speakers P1675

(1) Amplifier Mounting Plate With Wiring Kit RFKHD9813

(4) Direct Fit Front Speaker Adapters PMSA675

RECOMENDED 2-CH SYSTEM (1) 300 Watt 2-Channel Amplifier PBR300X2

(2) Speakers P1675

(1) Amplifier Mounting Plate With Wiring Kit RFKHD9813 (2) Direct Fit Front Speaker Adapters PMSA675

INTEGRATE MOUNTING KIT

SUGGESTED AUDIO SYSTEMS

(1) 300 Watt 4-Channel Amplifier

RFKHD9813

PMSA675

RECOMENDED 4-CH SYSTEM (1) 400 Watt 4-Channel Amplifier T400X4ad or TM400X4ad

(4) Speakers T1675

(1) Amplifier Mounting Plate With Wiring Kit RFKHD9813

(4) Direct Fit Front Speaker Adapters PMSA675

MOUNTING KIT

INTEGRATE

131

2015 BUYER’S GUIDE

RFKHD9813

PMSA675

RF ACCESSORIES Speaker Adapter Rings • Our PMSA Haley Davidson speaker adapter rings allow you to easily upgrade your factory speaker. • Designed for a direct fit application they perfectly align with the factory speaker mounting holes. • They allow you to install a variety of Rockford Power, Punch and Prime speaker from 6.0 to 6.75 inches.

FITMENT GUIDE

PMSA65 T16

P16

T165

P165

N/A

FITMENT GUIDE

PMSA675 T1650*

P1650

T1675*

P1675

R165X3

*T1650 and T1675 Will not fit the Road Glide ® models

FITS HARLEY - DAVIDSON® MODELS Ultra Classic® Electa Glide®

Street Glide®

1998 Tri Glide®

2013 Road Glide®

Road Glide Ultra®