Beal pro 2017

Page 1


ROPES BEAL

LIFETIME DURABILITY OF ROPES The durability of a rope depends above all on the way it is used, but also on numerous technical factors: The quality of yarn used ; the compactness of the rope ; its suppleness ; the braiding of the filaments of the sheath ; their twist ; their number ; the number of braids… One other factor plays a particularly important role: the thickness of the sheath. You can check the quantity of sheath in BEAL ropes thanks to the percentage shown at the side of this pictogram.

LIFETIME OF BEAL METALLIC PPE The lifetime of metal PPE is not limited. ATTENTION :

This is the potential lifetime in use. A metal item of PPE may be destroyed during its very first use. It’s inspection and control which determine if the product must be scrapped earlier. Between uses, appropriate storage is essential.

LIFETIME OF BEAL PLASTIC AND TEXTILE PPE 5 YEARS STORAGE TIME In good storage conditions plastic and textile BEAL PPE may be stored for up to 5 years before first use, without affecting their future lifetime in use.

10 YEARS LIFETIME IN USE The potential lifetime of plastic and textile BEAL PPE in use is up to a maximum of 10 years.

15 YEARS LIFETIME The maximum lifetime of plastic and textile BEAL PPE is up to 15 years. Lifetime = Time in storage + time in use.

SUMMARY ROPES ROPES FOR DIFFICULT AREA ACCESS . . . . . . . . . . . . . . . . . p. 4 à 6 UNIVERSAL ROPE TO BOTH STANDARDS . . . . . . . . . . . . . . . . . p. 7 FLOATING ROPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 7 RESCUE ROPES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 8 ROPES RESISTANT TO HIGH TEMPERATURES . . . . . . . . . . . . . . . p. 9 ROPES RESISTANT TO CHEMICAL PRODUCTS . . . . . . . . . . . . . p. 10 LIGHTWEIGHT ROPES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 11 SPECIAL ROPES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 11 ROPES FOR TREE WORK . . . . . . . . . . . . . . . . . . . . . . . . . p. 12 à 13 INTERVENTION ROPES . . . . . . . . . . . . . . . . . . . . . . . . . . p. 14 à 15 INTERVENTION FAST ROPES . . . . . . . . . . . . . . . . . . . . . . . . . . p.16

LANYARDS FALL ARREST LANYARDS . . . . . . . . . . . . . . . . . . . . . . . . p. 18 à 19 DYNAMIC LANYARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 20

HARNESS FALL ARREST, ROPE ACCESS AND WORK POSITIONING . . p. 22 à 23 WORK POSITIONING AND ROPE ACCESS . . . . . . . . . . . . . p. 24 à 25 FALL ARREST AND WORK POSITIONING . . . . . . . . . . . . . . . . . . p. 26 LIFE JACKET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 27 FALL ARREST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 28 à 29

HELMET WORK AT HEIGHT, RESCUE AND FOR INDUSTRY . . . . . . . . . . . p. 30

METAL LOCKING CONNECTOR . . . . . . . . . . . . . . . . . . . . . . . . . . p. 32 à 33 TWIN GATE LOCKING CONNECTOR . . . . . . . . . . . . . . . . . . . . . p. 34 PULLEY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 36 à 37 RIGGING PLATES AND SWIVEL . . . . . . . . . . . . . . . . . . . . . . . . p. 37 FALL ARREST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 38 ROPE CLAMPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 39 DESCENDER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 40 LADDERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 41

PACKS BAGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 42 à 45

WORK STATION

. . . . . . . . . . . . . . . . . . p. 46 à 49

SLINGS / ANCHORS SLINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 50 ACCESSORY CORDS AND WEBBING . . . . . . . . . . . . . . . . . . . . p. 51

ROPE PROTECTORS LIFETIME IN USE The potential lifetime of plastic and textile BEAL PPE in use is up to a maximum of 10 years. ATTENTION :

This is the potential lifetime in use. An item of PPE may be destroyed during its very first use. It’s inspection and control which determine if the product must be scrapped earlier. Between uses, appropriate storage is essential.

KITS

. . . . . . . . . . . . p. 52 à 53

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 54

GLOVES & ACCESSORIES

. . . . . . . p. 55

LIGHTING HEADLAMPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 58 à 63 LANTERNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 64

1


SERVICES

IDENTIFICATION IDN

UNIQUE NUMBER

idN

Year of manufacture

All BEAL PPE is marked with a unique number which, in addition to providing the year of manufacture, ensures traceability of the product.

BCC

BEAL COLOR CODE

BEAL slings, pre-cut ropes and lanyards are either embroidered or have a line of stitching which -dependant on the colour useddepicts the year of manufacture of the product.

TIP

TRACEABILITY, IDENTIFICATION, PERSONALISATION The colour of the internal thread identifies the year of manufacture.

Harnesses, lanyards, energy absorbers, ropes with sewn terminations are supplied with a TIP label (traceability, identification and personalisation). TIP allows you to identify an item by writing your name and personalising the unique number of your PPE. The TIP also has a QR code and web link to instantly access the item’s logbook online, promoting its management. It equally allows for a new generation RFID chip, called NFC, to be stuck to the label as an add-on.

PPE MANAGEMENT www.beal-inspect.com is a PPE management website. By using responsive technology from whichever phone, tablet or computer (connected to the internet) it is able to store logbooks, your documents as well as user instructions in the ‘cloud’ and to share these between terminals. Regardless of the make of your PPE, you can log all inspections, become notified of their forthcoming inspections and share information between terminals (smartphone, tablet, PC and Mac) as well as other people who have been given authorisation.

ROPE

REGISTER SAVE

HARNESS

NFC

012 34

2

567 14


SERVICES

CUSTOMIZATION NFC

NEAR FIELD CONNECTION

NFC is a new standard in RFID chips, ultra compact and flat, compatible with most new generation Smartphones. By bringing your phone close to the NFC chip, information relating to the item of PPE can be accessed directly and wirelessly without the need for specific software, similar to wireless payments which are already becoming commonplace. All PPE equipped with a TIP label can accommodate a NFC chip to allow kit management via smartphone.

It is possible, through special order, to personalise certain helmets, harnesses and BEAL bags with your company’s logo or other information required for your activities. This personalisation can be made to be reflective to provide additional safety. www.beal-pro.com

NFC

YOUR LOGO HERE

SHARE

STORE

ALERT

HELMET

LOOK UP / SHARE

CONNECTOR

3


ROPES FOR DIFFICULT AREA ACCESS

ACCESS 10,5 mm

Pe r fo r m a n c e s

UNICORE

Thanks to the UNICORE Process, Access ropes reach a new level in security. In effect, the UNICORE Process integral to this 10.5 mm rope will secure most delicate operations, whilst retaining lightness and flexibility.

Type Weight per metre Breaking load % of the sheath Strength with sewn terminations

EN 1891 -

A 65 g 3000 daN (kg) 38 % 2400 daN (kg)

OPTION Sewn terminations

Standard CE

ACCESS 11 mm

EN 1891

Ref. blue: BCSA105.100.B (100m) / BCSA105.200.B (200m) / BCSA.105.500.B (500m) orange: BCSA105.100.O (100m) / BCSA105.200.O (200m) / BCSA.105.500.O (500m)

Pe r fo r m a n c e s

UNICORE

With UNICORE as standard, bonding core and sheath for maximum security in all situations.

Type Weight per metre Breaking load % of the sheath

EN 1891 -

Strength with sewn terminations

A 73 g 3200 daN (kg) 36 % 2400 daN (kg)

OPTION Standard CE

EN 1891

Sewn terminations

ANTIPODES 10,5 mm Very tough, this is the established standard rope for work at height. Same construction as the INDUSTRIE 10.5 mm.

Pe r fo r m a n c e s

Type Weight per metre Breaking load % of the sheath

EN 1891 -

Strength with sewn terminations Standard CE

ANTIPODES 11,5 mm Great abrasion resistance for the most demanding applications.

Type

Breaking load % of the sheath Strength with sewn terminations Standard CE

4

A 65 g 3000 daN (kg) 38 % 2400 daN (kg) EN 1891

Ref. white: BCS105.50 (50m) / BCS105.100 (100m) / BCS105.200 (200m) / BCS105.500 (500m)

Pe r fo r m a n c e s

Weight per metre

EN 1891 -

Ref. red: BCSA11.100.R (100m) / BCSA11.200.R (200m) / BCSA11.500.R (500m) yellow: BCSA11.100.Y (100m) / BCSA11.200.Y (200m) / BCSA11.500.Y (500m)

A 78 g 3400 daN (kg) 38 % 2600 daN (kg) EN 1891

Ref. white: BCS115.100 (100m) / BCS115.200 (200m) red: BCS115.200.R (200m)


ROPES FOR DIFFICULT AREA ACCESS

INDUSTRIE 10,5 mm This rope is specially adapted to the requirements of work at height companies.

ROPES

Pe r fo r m a n c e s

Type Weight per metre Breaking load

EN 1891 OPTION Sewn terminations Ref. white with sewn termination: BCSI105.10TERM (10m) / BCSI105.20TERM (20m) / BCSI105.30TERM (30m) / BCSI105.40TERM (40m) / BCSI105.50TERM (50m) / BCSI105.60TERM (60m)

% of the sheath Strength with sewn terminations Standard CE

INDUSTRIE 11 mm An ideal rope with no diameter restrictions for security in work at height.

Type

Breaking load OPTION Sewn terminations

Ref. white with sewn termination: BCSI11.10TERM (10m) / BBCSI11.20TERM (20m) / BCSI11.30TERM (30m) / BCSI11.40TERM (40m) / BCSI11.50TERM (50m) / BCSI11.60TERM (60m) red with sewn termination: BCSI11.10TERM.R (10m) / BCSI11.20TERM.R (20m) / BCSI11.30TERM.R (30m) / BCSI11.40TERM.R (40m) / BCSI11.50TERM.R (50m) / BCSI11.60TERM.R (60m)

% of the sheath Strength with sewn terminations Standard CE

INDUSTRIE 12 mm An ideal work at height rope when a large rope diameter is required for greater security.

Type

Breaking load % of the sheath

OPTION Sewn terminations

Strength with sewn terminations Standard CE

CONTRACT 10,5 mm Type A rope with the optimum balance quality/ price.

38 % 2400 daN (kg) EN 1891

Ref. white: BCSI105.50 (50m) / BCSI105.100 (100m) / BCSI105.200 (200m) / BCSI105.500 (500m) red: BCSI105.50.R (50m) / BCSI105.100.R (100m) / BCSI105.200.R (200m) / BCSI105.500.R (500m) blue: BCSI105.100.B (100m) / BCSI105.200.B (200m)

A 73 g 3200 daN (kg) 36 % 2400 daN (kg) EN 1891

Ref. white: BCSI11.50 (50m) / BCSI11.100 (100m) / BCSI11.200 (200m) / BCSI11.500 (500m) red: BCSI11.50.R (50m) / BCSI11.100.R (100m) / BCSI11.200.R (200m) / BCSI11.500.R (500m) blue: BCSI11.50.B (50m) / BCSI11.100.B (100m) / BCSI11.200.B (200m) / BCSI11.500.B (500m) orange: BCSI11.100.O (100m) / BCSI11.200.O (200m)

A 94 g 4200 daN (kg) 34 % 3000 daN (kg) EN 1891

Ref. white: BCSI12.200 (200m) / red: BCSI12.200.R (200m)

Pe r fo r m a n c e s

Type Weight per metre Breaking load % of the sheath Strength with sewn terminations

EN 1891 -

3000 daN (kg)

Pe r fo r m a n c e s

Weight per metre

EN 1891 -

65 g

Pe r fo r m a n c e s

Weight per metre

EN 1891 -

A

Standard CE

A 66 g 2500 daN (kg) 39 % 2200 daN (kg) EN 1891

Ref. white: BCS105C.20 (20m) / BCS105C.30 (30m) / BCS105C.40 (40m) / BCS105C.50 (50m) / BCS105C.60 (60m) / BCS105C.80 (80m) / BCS105C.100 (100m) / BCS105C.200 (200m) / BCS105C.500 (500m)

5


ROPES FOR DIFFICULT AREA ACCESS

TOP WORK 10,5 mm A rope particularly resistant to abrasion due to its higher percentage of sheath.

Pe r fo r m a n c e s

Type Weight per metre Breaking load % of the sheath

EN 1891 -

Strength with sewn terminations OPTION

Standard CE

A 64 g 2600 daN (kg) 44 % 2200 daN (kg) EN 1891 Ref. white: BCSPW105.200 (200m)

Sewn terminations

Pe r fo r m a n c e s

NORTH SEA 11 mm Type

Specially developed in collaboration with one of the principal oil companies for use in difficult conditions on oil rigs. Great handling and maximum durability.

Weight per metre Breaking load % of the sheath

EN 1891 -

Strength with sewn terminations

A 75 g 2800 daN (kg) 44 % 2200 daN (kg)

OPTION Sewn terminations

Standard CE

EN 1891 Ref. white: BCSPW11.200 (200m)

DYNAMICS ROPES

TOP GUN II 10,5 mm

Pe r fo r m a n c e s

UNICORE

Dynamic ropes cushion impacts and must be used during certain procedures to absorb the energy of possible falls.

Type Weight per metre Breaking load % of the sheath

EN 892 -

Strength with sewn terminations

68 g 2100 daN (kg) 40 % 1700 daN (kg)

OPTION Standard CE

EN 892

Sewn terminations

APOLLO 11 mm Dynamic ropes cushion impacts and must be used during certain procedures to absorb the energy of possible falls.

Pe r fo r m a n c e s

Type Weight per metre Breaking load % of the sheath Standard CE

EN 892 -

6

Ref. green: BC105T.50.G (50m) / BC105T.60.G (60m) / BC105T.70.G (70m) / BC105T.200.G (200m) blue: BC105T.50.B (50m) / BC105T.60.B (60m) / BC105T.70.B (70m) / BC105T.200.B (200m)

75 g 2300 daN (kg) 35 % EN 892 Ref. red: BC11A.50.R (50m) / BC11A.60.R (60m) / BC11A.200.R (200m) anise: BC11A.50.A (50m) / BC11A.60.A (60m) / BC11A.200.A (200m)


UNIVERSAL ROPE TO BOTH STANDARDS EN 892 & EN 1891

DYNASTAT 10,5 mm Security rope which conforms to 2 standards, both the semi-static and the dynamic rope standards. It’s thus a classic semi-static rope well adapted to various types of work on ropes, to rescue, and to tactical applications. In event of a very violent fall an internal Vectran ‘fuse’ will rupture, and the rope then becomes dynamic, with all the security that characterises dynamic ropes. The fuse will rupture under a force of around 3 kN. In addition, DYNASTAT resists a fall factor 1 drop holding 100 kg over a sharp metal edge of 0.75 mm radius. Ideal for delicate operations at height, pylon climbing, clock towers, rescue and fast technical intervention.

ROPES

Pe r fo r m a n c e s

Type Weight per metre Breaking load % of the sheath Strength with sewn terminations Standard CE

A 75 g 2500 daN (kg) 44 % 1900 daN (kg) EN 892 EN 1891

STRONG POINTS • Semi-static

and dynamic rope giving security in a wide range of circumstances. • Very low stretch of just 2 % in use. • Semi-static rope that does not shrink, and thus doesn’t stiffen up. • A rope that’s supple, with very agreeable handling.

EN 892 + EN 1891 OPTION Sewn terminations Ref. black & yellow: BCDS105.50 (50m) / BCDS105.60 (60m)

FLOATING ROPE

PRO WATER 11 mm

Pe r fo r m a n c e s

UNICORE

Floating type A semi-static rope for work at height above water (off-shore wind farms, oil rigs). It can also be used for swift water rescues. A new patented technique allows PRO WATER 11 mm to become the first floating semi-static type A rope on the market. Thanks to limited shrinking in water, its suppleness is maintained and knots remain easy to tie. In case of an operative falling into water, boat based emergency services can easily see this orange rope which, because of its floatability, is unlikely to get tangled in propellers. PRO WATER rope benefits from all the advantages of UNICORE technology thus giving it a real increase in security.

Type Weight per metre Breaking load % of the sheath Standard CE

A

Neopren Core

80 g 2500 daN (kg)

UNICORE

33 % EN 1891

EN 1891 -

Sheath

Ref. orange: BCSW11.100 (100m) / BCSW11.200 (200m)

7


RESCUE ROPES

RESCUE 10,5 mm Semi-static type A rope with a polyester sheath. Its fluorescent orange colour make it particularly suited for use in rescues.

Pe r fo r m a n c e s

Type Weight per metre Breaking load % of the sheath

EN 1891 -

Strength with sewn terminations

A 65 g 3000 daN (kg) 38 % 2400 daN (kg)

OPTION Standard CE

EN 1891

Sewn terminations

Ref. orange: BCSR105.200 (200m)

RESCUE VLS 11,3 mm The Rescue VLS is a very low stretch rope designed for technical rope rescue. VLS for Very Low Stretch. Elongation 50-150kg : 0,8%

Pe r fo r m a n c e s

Weight per metre Breaking load % of the sheath Strength with sewn terminations

CE / NFPA 1983 -

Standard NFPA OPTION

94 g 3600 daN (kg) 43 % 2800 daN (kg) Conforms to the main requirements of the NFPA 1983-2012 standard Ref. yellow Fluorescent: BCSR113.200.Y (200m) / black: BCSR113.200.BK (200m)

Sewn terminations

REACTIVE 10,5 mm A specialist rope for rescues in low light conditions. Highly visible as soon as a light source is pointed towards it thanks to a reflective yarn that is woven through the sheath.

Pe r fo r m a n c e s

Type Weight per metre

Warning

The reflective yarn is very fragile and wears rapidly when subjected to abrasion, although it maintains its reflective properties. Its wear does not affect the rope’s strength.

Breaking load % of the sheath Strength with sewn terminations

EN 1891 OPTION

Standard CE

A 67 g 3000 daN (kg) 37 % 2800 daN (kg) EN 1891 Ref. yellow Fluorescent: BCSRR105.200 (200m)

Sewn terminations

PRO WATER 11 mm

Pe r fo r m a n c e s

UNICORE

Floating type A semi-static rope for work at height above water (off-shore wind farms, oil rigs). It can also be used for swift water rescues. A new patented technique allows PRO WATER 11 mm to become the first floating semi-static type A rope on the market. Thanks to limited shrinking in water, its suppleness is maintained and knots remain easy to tie. In case of an operative falling into water, boat based emergency services can easily see this orange rope which, because of its floatability, is unlikely to get tangled in propellers. PRO WATER rope benefits from all the advantages of UNICORE technology thus giving it a real increase in security.

8

Type Weight per metre Breaking load % of the sheath Standard CE

A

Neopren Core

80 g 2500 daN (kg)

UNICORE

33 % EN 1891

EN 1891 -

Sheath

Ref. orange: BCSW11.100 (100m) / BCSW11.200 (200m)




LIGHTWEIGHT ROPES

Semi-Static type B rope, ultra light, but necessitating great care during use.

ROPES

ANTIPODES 9 mm Ref. white: BCS09.100 (100m) / BCS09.200 (200m) red: BCS09.100.R (100m) / BCS09.200.R (200m)

Pe r fo r m a n c e s

EN 1891 Type Weight per metre Breaking load % of the sheath Standard CE

9 mm : B 10 mm : A 9 mm : 51 g 10 mm : 62 g 9 mm : 1900 daN (kg) 10 mm : 2400 daN (kg) 43 % EN 1891

ANTIPODES 10 mm The lightest of the type A ropes with a margin of security sufficient for some industrial uses.

Ref. white: BCS10.100 (100m) / BCS10.200 (200m) red: BCS10.100.R (100m) / BCS10.200.R (200m)

EN 1891 -

SPECIAL ROPES

AUSTRALIS 11,5 mm Specially developed to meet the requirements of Australian standard AS4143.3, this very low stretch rope has a sheath in polyester and is constructed like the American ropes.

Pe r fo r m a n c e s

Type Weight per metre Breaking load % of the sheath

93,7 g 3490 daN (kg)

AS4143.3 -

42 %

STRONG POINTS • Reduction

in shrinkage (polyester). heat resistance (Melting point of polyester 260° C). • Better abrasion resistance due to a thick sheath. • Better

Standard AS4143.3

Ref. BCSA115.200

ERGO 12,5 mm

Pe r fo r m a n c e s

Designed to meet the needs of firefighters in their different tasks, conforming to civil security code NIT no. 129-83-92 and to the Standard EN 1891.

Type Weight per metre Breaking load % of the sheath

EN 1891 -

Strength with sewn terminations

A 101 g 3800 daN (kg) 43 % 2700 daN (kg)

OPTION Sewn terminations

Standard CE

EN 1891

Ref. white: BCSE125.30 (30m) / BCSE125.60 (60m) / BCSE125.100 (100m) / BCSE125.200 (200m)

11


ROPES FOR TREE WORK

BILOBA 11,5 mm A lightweight arborist rope specially designed for use with mechanical Prusiks. Its double braided construction makes the rope particularly supple. Fluorescent colours ensure the rope is highly visible. Materials: polyester sheath, polyamide core

Pe r fo r m a n c e s

Type Weight per metre Breaking load % of the sheath

EN 1891 -

Strength with sewn terminations

A 89 g 3000 daN (kg) 44 % 1800 daN (kg)

OPTION Standard CE

EN 1891

Compact sewn terminations

GINKGO 12 mm

Ref. orange & yellow: BCSE115.200 (200m) orange & yellow with sewn termination: BCSE115.20TERM (20m) / BCSE115.30TERM (30m) / BCSE115.35TERM (35m) / BCSE115.40TERM (40m) / BCSE115.50TERM (50m) / BCSE115.60TERM (60m) orange & yellow with two ending: BCSE115.20TERM (20m) / BCSE115.30TERM (30m) / BCSE115.35TERM (35m) / BCSE115.40TERM (40m) / BCSE115.50TERM (50m) / BCSE115.60TERM (60m)

Pe r fo r m a n c e s

Made along the same lines as the BAOBAB, its thinner diameter makes a lighter rope, more supple and easier to handle than BAOBAB. It benefits from a new, glueless procedure for bonding the sheath onto the core, preventing all slippage, but still allowing splices to be made.

Type Weight per metre Breaking load % of the sheath Strength with sewn terminations

EN 1891 -

A 92 g 2700 daN (kg) 69 % 2200 daN (kg)

OPTION Standard CE

EN 1891

Sewn terminations

BAOBAB 13,5 mm

Ref. black & yellow: BCSE12.200 (200m) black & yellow with sewn termination: BCSE12.20TERM (20m) / BCSE12.30TERM (30m) / BCSE12.35TERM (35m) / BCSE12.40TERM (40m) / BCSE12.50TERM (50m) / BCSE12.60TERM (60m) black & yellow with two ending: BCSE12.20TERM2 (20m) / BCSE12.30TERM2 (30m) / BCSE12.35TERM2 (35m) / BCSE12.40TERM2 (40m) / BCSE12.50TERM2 (50m) / BCSE12.60TERM2 (60m)

Pe r fo r m a n c e s

UNICORE

Its braiding results from the technology of American tree workers, giving it great qualities of strength, pliability and easy handling. The UNICORE process which bonds the core and sheath prevents sheath slippage during use with self-loacking loops.

Type Weight per metre Breaking load % of the sheath Strength with sewn terminations

EN 1891 OPTION

Standard CE

A 119 g 3000 daN (kg) 82 % 2300 daN (kg) EN 1891

Sewn terminations

BONSAĂ? 13 mm

red & white with sewn termination: BCSE135.20TERM2 (20m) / BCSE135.30TERM2 (30m)

Pe r fo r m a n c e s

This multi-use rope, with an excellent handling/ solidity balance, allows you to undertake all types of tree work in full security.

Type Weight per metre Breaking load % of the sheath Strength with sewn terminations

EN 1891 -

A 98 g 3400 daN (kg) 61 % 2500 daN (kg)

OPTION Standard CE Sewn terminations

12

Ref. red & white: BCSE135.200 (200m)

EN 1891

Ref. blue & white: BCSE13.200 (200m) Blue & white with sewn termination: BCSE13.20TERM (20m) / BCSE13.30TERM (30m) / BCSE13.40TERM (40m) / BCSE13.50TERM (50m) Blue & white with two sewn terminations: BCSE13.20TERM2 (20m) / BCSE13.30TERM2 (30m) / BCSE13.40TERM2 (40m) / BCSE13. 50TERM2 (50m)


ROPES FOR TREE WORK

ROPES FOR PRUSIKS

VOLCANO 8 / 10 / 12 mm

REGATE 10 mm Its double braid polyester serves to make prusik loops. This 10 mm diameter rope, with high abrasion resistance, runs perfectly.

The 10 mm VOLCANO also comes in cut lengths: - In multiples of 10 cm. - Maximum length 200 cm. - Minimum 50 pieces per length.

Pe rfo rm a n c e s

Weight per metre

Short lengths of rope with sewn terminations for constructing self-locking (prusik) loops. These ropes have a 50 % aramid construction intermixed with polyester filaments. Prusiks made from classic ropes have a very short life, because they glaze in use due to the effect of friction. The presence of 50 % of highly thermally resistant aramid fibres in VOLCANO protect it against melting and thus greatly increases its lifetime. Available in 10 and 12 mm, and 70 and 90 cm lengths, to suit different types of knots.

75 g

Diameter

8 / 10 / 12 mm

Breaking load

2200 daN (kg)

Standard CE

EN 354

Ref. black / yellow / white: BREG10.100 (100m)

Slings allowing a pulley to be fixed at height in the tree, and on the other hand the braking system at the base of the trunk.

ADJUSTABLE TRUNK SLING Manufactured from hollow braid polyester with a polyurethane coating, this adjustable sling is principally designed for the attachment of braking systems at ground level, at the base of the trunk. Its conception allows it to adapt exactly to different trunk diameters. Available in two lengths: 3 and 4 m.

Ref. yellow: BLT3 (3m) / BLT5 (5m) / BLT7 (7m)

TOP TRUNK SLING (Pulley attachment) Manufactured from hollow braid polyester with a polyurethane coating, this sling is specifically adapted to light removals up to 1100 daN(kg) WLL. Available in two lengths: 3 and 4 m.

Ref. 8 mm red & yellow: BV08.70 (70cm) / BV08.90 (90cm) 12 mm red & yellow: BV12.70 (70cm) / BV12.90 (90cm) 10 mm red & yellow: BV10.70 (70cm) / BV10.90 (90cm)

RETENTION ROPES The regulations require the application of a coefficient of 7 to all lifting ropes. Breaking load divided by 7 = WLL (Working Load Limit). The weight of the branches must not exceed the Working Load Limit for dismantling in total security. BEAL retention ropes are colour coded by diameter and thus by strength in order to avoid errors.

Ref. yellow: BLTT3 (3m) / BLTT4 (4m)

TOP TRUNK SLING DYNEEMA 5 m

GOLIATH

(High strength pulley attachment) Of identical construction to TOP TRUNK, with a Dyneema sheath which gives it exceptional breaking load and a WLL of more than 2000 daN(kg) !

Coming from the technology of American tree dismantling ropes, GOLIATH is a static double braid rope of 100 % polyester pre-stretched with a polyurethene coating for better abrasion resistance. This rope has an excellent strength/diameter ratio.

Ref. blue: BLG12 (12mm) / green: BLG14 (14mm) / red: BLG16 (16mm) / black: BLG18 (18mm)

Ref. grey: BLTTD5 (5m)

Diameter

TRUNK

TOP TRUNK

TOP TRUNK DYNEEMA

20 mm

20 mm

18 mm

Breaking load

8000 daN (kg) 8000 daN (kg) 18000 daN (kg)

Polyester

CMU

1100 daN (kg) 1100 daN (kg) 2500 daN (kg)

219 g

Polyester

260 g

Polyester

Weight per metre

240 g

240 g

160 g

Material

Polyester

Polyester

Dyneema

Diameter

Breaking load

CMU

Weight per metre

Material

GOLIATH 12

12 mm

4200 daN (kg)

600 daN (kg)

128 g

Polyester

GOLIATH 14

14 mm

5500 daN (kg)

780 daN (kg)

179 g

GOLIATH 16

16 mm

6700 daN (kg)

950 daN (kg)

GOLIATH 18

18 mm

8000 daN (kg)

1000 daN (kg)

13

ROPES

DISMANTLING SLINGS


INTERVENTION ROPES (RESISTANT TO RAPID DESCENTS)

RAIDER 10,5 mm Type B semi-static ropes specially developed for rapid descent from helicopters by special forces. Their Aramid sheath does not melt, even against a descender overheated by the descent. Whereas classic ropes in polyamide or polyester have a very limited lifetime because their sheath melts, rendering the rope stiff and useless, RAIDER ropes permit multiple descents.

Pe r fo r m a n c e s

Type Weight per metre

B 69 g Core

Breaking load % of the sheath

2300 daN (kg) 32 % Sheath Aramid

Strength with sewn terminations

EN 1891 -

Aramid

2200 daN (kg)

OPTION Standard CE

EN 1891

Sewn terminations

Ref. black: BCSK105R.200 (200m)

Pe r fo r m a n c e s

RAIDER 11 mm Type B semi-static ropes specially developed for rapid descent from helicopters by special forces. Their Aramid sheath does not melt, even against a descender overheated by the descent. Whereas classic ropes in polyamide or polyester have a very limited lifetime because their sheath melts, rendering the rope stiff and useless, RAIDER ropes permit multiple descents.

Weight per metre

OPTION

B 81 g Core

Breaking load % of the sheath Strength with sewn terminations

EN 1891 Aramid

Type

Standard CE

2600 daN (kg) 41 % 2200 daN (kg) EN 1891

Sewn terminations

Ref. black: BCSK11R.200 (200m)

Pe r fo r m a n c e s

RAIDER TACTIC 11 mm As with the 11 mm RAIDER rope, designed for multiple descents, the RAIDER TACTIC 11 mm is slightly more limited. The thickness of the Aramid sheath has been reduced, and the amount of core increased, in order for RAIDER TACTIC 11 mm to be certifiable as a Type A rope.

Type Weight per metre Breaking load % of the sheath Strength with sewn terminations

EN 1891 Aramid

A 75 g 2400 daN (kg) 30 % 2200 daN (kg)

OPTION Standard CE

EN 1891

Sewn terminations

Ref. black: BCSK11RT.200 (200m)

INTERVENTION ROPES

TOP GUN II 10,5 mm Dynamic ropes cushion impacts and must be used during certain interventions to absorb the energy of any falls.

Ref. BC105T.200.BK BC105T.50.BK BC105T.60.BK

Type Weight per metre Breaking load

EN 892 -

(DYNAMIC)

Pe r fo r m a n c e s

UNICORE

% of the sheath Strength with sewn terminations Standard CE

14

Sheath Aramid

68 g 2100 daN (kg) 40 % 1700 daN (kg) EN 892


INTERVENTION ROPES

ACCESS 10,5 mm

(SEMI-STATIC)

ROPES

Pe r fo r m a n c e s

UNICORE

Type

Thanks to the UNICORE Process, ACCESS ropes reach a new level in security. By special order only.

Weight per metre Breaking load % of the sheath

EN 1891 -

Strength with sewn terminations OPTION

Standard CE

A 65 g 3000 daN (kg) 38 % 2400 daN (kg) EN 1891

Sewn terminations

Ref black: BCSA105.200.BK (200m)

Pe r fo r m a n c e s

INTERVENTION

9 mm

Semi-static ropes are endowed with moderate stretch to facilitate interventions and abseils at moderate speed.

Type Weight per metre

Breaking load

% of the sheath

EN 1891 -

Strength with sewn terminations Standard CE

9 mm : B 10 mm : A 10,5 mm : A 9 mm : 51 g 10 mm : 62 g 10,5 mm : 65 g 9 mm : 1900 daN(kg) 10 mm : 2400 daN(kg) 10,5 mm : 3000 daN(kg) 9 mm : 43 % 10 mm : 43 % 10,5 mm : 38 % 9 mm / 10 mm : 10,5 mm / 11 mm : 2400 daN(kg)

11 mm : A 11,5 mm : A

10 mm

11 mm : 73 g 11,5 mm : 78 g 11 mm : 3200 daN(kg) 11,5 mm : 3400 daN(kg) 11 mm : 36 % 11,5 mm : 38 % 11,5 mm : 2600 daN(kg)

EN 1891

10,5 mm

Ref black: BCSN09.200 (9mm/200m) / BCSN10.200 (10mm/200m) / BCSN105.50 (10,5mm/50m) / BCSN105.60 (10,5mm/60m) / BCSN105.100 (10,5mm/100m) / BCSN105.200 (10,5mm/200m) / BCSN11.50 (11mm/50m) / BCSN11.100 (11mm/100m) / BCSN11.200 (11mm/200m) / BCSN115.200 (11,5mm/200m)

11 mm

11,5 mm

TAPES AND SLINGS

FLAT WEBBING 26 mm /

18 mm / Ref. BSP26UNI.100 (26mm / 100m) BSP18.100 (18mm / 100m)

1500 kg /

1600 kg /

ROUND SLINGS EN 565

EN 565

18 mm /

30 mm /

2200 kg / EN 566 / EN 795 B + EN 354

2200 kg /

EN 566

26 mm / Ref. PLATE 18MM 30CM : BSA30.5.BK 40CM : BSA40.5.BK 50CM : BSA50.5.BK 60CM : BSA60.5.BK 80CM : BSA80.5.BK 100CM : BSA100.5.BK 120CM : BSA120.5.BK

2200 kg / 150CM : BSA150.5.BK 175CM : BSA175.5.BK

Ref. PLATE 26MM 100CM : BSA26.100.5 120CM : BSA26.120.5 150CM : BSA26.150.5 175CM : BSA26.175.5

EN 566 Ref. PLATE 30MM 100CM : BSA30.100.5 120CM : BSA30.120.5 150CM : BSA30.150.5 175CM : BSA30.175.5

TUBULAR WEBBING Ref. BST26.100 (100m)

26 mm /

1600 kg /

EN 565

15


INTERVENTION ROPES - FAST ROPES Tested and approved by special forces around the world, BEAL FAST ROPE has been specifically developed for rapid descent from helicopters without the aid of a descender, just the friction of gloves !

SOFT FAST ROPE 40 mm Its soft and flexible construction promotes a comfortable and precise descent. FAST ROPE is available with 2 types of terminations: • EYE SPLICE: A large diameter splice, facilitating the deployment of the rope from scaffolding and larger beams, in order to simulate practice descents from helicopters. • DLT. Dynalite termination (not available in France): Lightweight textile termination, composed of a Dyneema slingspliced onto the rope end. Allows rapid fixing to most anchor points. At the moment of release the absence of metal in the termination eliminates the risk of injury to persons, or damage to boat bridges. The DLT termination must be checked before every use.

EYE SPLICE DLT. DYNALITE TERMINATION Ref. SOFT FAST ROPE + SPLICE 18m: BFR60.EP SOFT FAST ROPE + DLT 18 m : BFR60.DLT SOFT FAST ROPE + SPLICE 27,5m : BFR90.EP SOFT FAST ROPE + DLT 27,5m : BFR90.DLT

TEXTURIZED FAST ROPE 44 mm Its construction from completely textured strands makes the rope more slippery yet more durable. • Polyamide sling termination Suitable for most anchors. No metal part that can cause injury. • Metal termination A crimped metal end piece allows the rope to be fixed to a helicopter.

Ref. TEXTURIZED FAST ROPE + LOOP 18m: BFRT60.L TEXTURIZED FAST ROPE + STEEL END 18m: BFRT60.ST TEXTURIZED FAST ROPE + LOOP 27,5m: BFRT90.L TEXTURIZED FAST ROPE + STEEL END 27,5m: BFRT90.ST

16


Material

0%

65 g

38 %

62 %

2,5 %

Polyamide

3200 daN(kg) 2100 daN(kg) 2200 daN(kg) 2400 daN(kg)

20

5,1 kN

2,8 %

0%

73 g

36 %

64 %

2%

Polyamide

ANTIPODES 10,5 mm

EN 1891

CE

A

3000 daN(kg) 1950 daN(kg) 2100 daN(kg) 2400 daN(kg)

16

5,1 kN

3%

0,8 %

65 g

38 %

62 %

5%

Polyamide

ANTIPODES 11,5 mm

EN 1891

CE

A

3400 daN(kg) 2300 daN(kg) 2400 daN(kg) 2600 daN(kg)

>20

5,3 kN

2,6 %

0,5 %

78 g

38 %

62 %

5%

Polyamide

INDUSTRIE 10,5 mm

EN 1891

CE

A

3000 daN(kg) 1950 daN(kg) 2100 daN(kg) 2400 daN(kg)

16

5,1 kN

3%

0,8 %

65 g

38 %

62 %

5%

Polyamide

INDUSTRIE 11 mm

EN 1891

CE

A

3200 daN(kg) 2100 daN(kg) 2200 daN(kg) 2400 daN(kg)

20

5,1 kN

2,8 %

0,8 %

73 g

36 %

64 %

4%

Polyamide

INDUSTRIE 12 mm

EN 1891

CE

A

4200 daN(kg) 2400 daN(kg)

3000 daN(kg)

20

5,2 kN

2,5 %

0,3 %

94 g

34 %

66 %

2,4 %

Polyamide

CONTRACT 10,5 mm

EN 1891

CE

A

2500 daN(kg) 1750 daN(kg) 2000 daN(kg) 2200 daN(kg)

12

5 kN

2,9 %

0%

66 g

39 %

61 %

3,3 %

Polyamide

TOP WORK 10,5 mm

EN 1891

CE

A

2600 daN(kg) 1800 daN(kg) 2000 daN(kg) 2200 daN(kg)

15

4,6 kN

4,8 %

0,3 %

64 g

44 %

56 %

3,5 %

NORTH SEA 11 mm

EN 1891

CE

A

2800 daN(kg) 1900 daN(kg) 2000 daN(kg) 2200 daN(kg)

> 20

5,1 kN

4%

0,9 %

75g

44 %

56 %

3%

TOP GUN II 10,5 mm UNICORE

EN 892

CE

2100 daN(kg)

-

-

1700 daN(kg)

APOLLO 11 mm

EN 892

CE

2300 daN(kg)

-

-

-

-

ROPES

Shrinkage in water

3%

A

Type

Weight per metre

5,1 kN

CE

ROPES FOR DIFFICULT AREA ACCESS EN 1891 CE A

ACCESS 10,5 mm UNICORE

Sheath slippage

16

EN 1891

Breaking load

3000 daN(kg) 1950 daN(kg) 2100 daN(kg) 2400 daN(kg)

ACCESS 11 mm UNICORE

Standard

Mass of the core

% of the sheath

Extension 50/150 kg

Impact force factor 0.3

Number of fall factor 1

Strength with sewn terminations

Strength with Figure-of-9 knot

Strength with Figure-of-8 knot

Certification

Model

DYNAMIC ROPES

Factor 2 11 Factor 2 16

UNIVERSAL ROPE TO BOTH STANDARDS A 24 EN 892 DYNASTAT 10,5 mm 2500 daN(kg) 1650 daN(kg) 1700 daN(kg) 1900 daN(kg) Factor 2 EN 1891 CE 10 FLOATING ROPE

-

-

-

68 g

40 %

60 %

-

Polyamide

-

-

-

75 g

35 %

65 %

-

Polyamide

4,3 kN

2%

0,8 %

75 g

44 %

56 %

0%

Sheath: Polyamide Core: Polyamide/ Vectran

EN 1891

CE

A

2500 daN(kg) 1600 daN(kg)

-

-

5

5 kN

3,6 %

0%

80 g

33 %

67 %

0%

Polyamide / Neopren

EN 1891

CE

A

3000 daN(kg) 1950 daN(kg)

-

2400 daN(kg)

16

5,1 kN

3%

0,8 %

65 g

38 %

62 %

5%

Sheath: Polyester Core: Polyamide

NFPA

CE

A

3600 daN(kg)

94 g

43 %

57 %

RESCUE REACTIVE 10,5 mm

EN 1891

CE

A

3000 daN(kg) 1950 daN(kg)

-

2800 daN(kg)

16

5,1 kN

2,6 %

0%

67 g

37 %

63 %

1,8 %

Polyamide

PRO WATER 11 mm UNICORE

EN 1891

CE

A

2500 daN(kg) 1600 daN(kg)

-

-

5

5 kN

3,6 %

0%

80 g

33 %

67 %

0%

Polyamide / Neopren

-

2200 daN(kg)

6

4,6 kN

3,2 %

0%

69 g

32 %

68 %

0,5 %

PRO WATER 11 mm UNICORE

RESCUE ROPES RESCUE 10,5 mm RESCUE VLS 11,3 mm

-

0,8 %

Polyester

ROPES RESISTANT TO HIGH TEMPERATURES RAIDER 10,5 mm

EN 1891

CE

B

2300 daN(kg) 1800 daN(kg)

RAIDER 11 mm

EN 1891

RAIDER TACTIC 11 mm

EN 1891

CE

B

2600 daN(kg) 1900 daN(kg)

-

2200 daN(kg)

8

4,7 kN

3,3 %

0,6 %

81 g

41 %

59 %

0,5 %

CE

A

2400 daN(kg) 1800 daN(kg)

-

2200 daN(kg)

6

5,9 kN

3,2 %

0%

75 g

30 %

70 %

0,5 %

ROPES RESISTANT TO CHEMICAL PRODUCTS

Sheath: Aramid Core: Polyamide Sheath: Aramid Core: Polyamide Sheath: Aramid Core: Polyamide

HOTLINE 11 mm

EN 1891

CE

A

2500 daN(kg) 1900 daN(kg)

-

2200 daN(kg)

15

5,6 kN

3,1 %

0%

79 g

42 %

58 %

3,3 %

RAIDER 11 mm

EN 1891

CE

B

2600 daN(kg) 1900 daN(kg)

-

2200 daN(kg)

8

4,7 kN

3,3 %

0,6 %

81 g

41 %

59 %

0,5 %

Sheath: Polyamide Core: Polyamide/Aramid Sheath: Aramid Core: Polyamide

ANTIPODES 9 mm

EN 1891

CE

B

1900 daN(kg) 1350 daN(kg) 1600 daN(kg)

-

8

4 kN

3,6 %

0,3 %

51 g

43 %

57 %

4%

Polyamide

ANTIPODES 10 mm

EN 1891

CE

A

2400 daN(kg) 1700 daN(kg) 1800 daN(kg)

-

6

4,3 kN

4,4 %

0%

62 g

43 %

57 %

4%

Polyamide

ERGO 12,5 mm

EN 1891

CE

A

3800 daN(kg) 2500 daN(kg)

-

2700 daN(kg)

> 20

5,2 kN

2,9 %

0%

101g

43 %

57 %

3,7 %

Polyamide

AUSTRALIS 11,5 mm

AS4143.3

-

-

3490 daN(kg)

-

-

-

-

-

0%

93,7 g

42 %

58 %

-

LIGHTWEIGHT ROPES

SPECIAL ROPES

-

ROPES FOR TREE WORK BILOBA 11,5 mm

EN 1891

CE

A

3000 daN(kg) 1800 daN(kg)

-

2500 daN(kg)

> 15

5 kN

3,8 %

0%

89 g

44 %

56 %

2,8 %

GINKGO 12 mm

EN 1891

CE

A

2700 daN(kg) 1600 daN(kg)

-

2200 daN(kg)

>8

5,7 kN

4%

0%

92 g

69 %

31 %

2,8 %

BAOBAB 13,5 mm UNICORE

EN 1891

CE

A

3000 daN(kg) 1900 daN(kg)

-

2300 daN(kg)

> 20

5,1 kN

5%

0%

119 g

82 %

18 %

2%

Sheath: Polyester Core: Polyamide Sheath: Polyester Core: Polyamide Sheath: Polyester Core: Polyamide

BONSAI 13 mm

EN 1891

CE

A

3400 daN(kg) 1800 daN(kg)

-

2500 daN(kg)

> 20

5,3 kN

4,2 %

0%

98 g

61 %

39 %

4,5 %

Polyamide

REGATE 10 mm

-

CE

-

1700 daN(kg)

-

-

-

-

-

-

73 g

-

-

-

Polyester

RAIDER 10,5 mm

EN 1891

CE

B

2300 daN(kg) 1800 daN(kg)

-

2200 daN(kg)

6

4,6 kN

3,2 %

0%

69 g

32 %

68 %

0,5 %

RAIDER 11 mm

EN 1891

CE

B

2600 daN(kg) 1900 daN(kg)

-

2200 daN(kg)

8

4,7 kN

3,3 %

0,6 %

81 g

41 %

59 %

0,5 %

RAIDER TACTIC 11 mm

EN 1891

CE

A

2400 daN(kg) 1800 daN(kg)

-

2200 daN(kg)

6

5,9 kN

3,2 %

0%

75 g

30 %

70 %

0,5 %

Sheath: Aramid Core: Polyamide Sheath: Aramid Core: Polyamide Sheath: Aramid Core: Polyamide

ACCESS 10,5 mm UNICORE

EN 1891

CE

A

3000 daN(kg) 1950 daN(kg) 2100 daN(kg) 2400 daN(kg)

16

5,1 kN

3%

0%

65 g

38 %

62 %

2,5 %

Polyamide

INTERVENTION 9 mm

EN 1891

CE

B

1900 daN(kg) 1350 daN(kg) 1600 daN(kg)

-

8

4 kN

3,6 %

0,3 %

51 g

43 %

57 %

4%

Polyamide

INTERVENTION 10 mm

EN 1891

CE

A

2400 daN(kg) 1700 daN(kg) 1800 daN(kg)

-

6

4,3 kN

4,4 %

0%

62 g

43 %

57 %

4%

Polyamide

INTERVENTION 10,5 mm

EN 1891

CE

A

3000 daN(kg) 1950 daN(kg) 2100 daN(kg) 2400 daN(kg)

16

5,1 kN

3%

0,8 %

65 g

38 %

62 %

5%

Polyamide

INTERVENTION 11 mm

EN 1891

CE

A

3200 daN(kg) 2100 daN(kg) 2200 daN(kg) 2400 daN(kg)

20

5,1 kN

2,8 %

0,8 %

73 g

36 %

64 %

4%

Polyamide

INTERVENTION 11,5 mm

EN 1891

CE

A

3400 daN(kg) 2300 daN(kg) 2400 daN(kg) 2600 daN(kg)

> 20

5,3 kN

2,6 %

0,5 %

78 g

38 %

62 %

5%

Polyamide

EN 892

CE

-

-

-

INTERVENTION ROPES

SEMI-STATIC INTERVENTION

DYNAMIC ROPES TOP GUN II 10,5 mm UNICORE SOFT FAST ROPE 40 mm

-

2100 daN(kg)

-

-

1700 daN(kg)

Factor 2 11

-

-

-

68 g

40 %

60 %

-

Polyamide

7600 daN(kg)

-

-

-

-

-

-

-

94 kg / 100 m

-

-

-

Polyamide

-

-

-

-

-

-

-

96 kg / 100 m

-

-

-

Polyamide

Polyamide sling termination:

TEXTURIZED FAST ROPE 44 mm

-

-

-

6000 kg

Metal termination:

3000 kg Standard reference

-

Type A >2200 daN(kg)

>1500 daN(kg)

-

>1500 daN(kg) > 5/100 kg < 6kN

≤ 5%

20 mm + 10 (D-9 mm)

-

-

-

-

-

Type B

>1200 daN(kg)

-

>1200 daN(kg) > 5/80 kg

≤ 5%

< 15 mm

-

-

-

-

EN 1891 >1800 daN(kg)

< 6kN

17


FALL ARREST LANYARDS

ABSORB’AIR Webbing construction energy absorber. Energy is absorbed through the controlled tearing of the webbing’s weft during deployment. STRONG POINTS • Compact

and lightweight. to open semi-rigid pouch. • Easy to inspect in its entirety. • Easy to dry once unrolled.

• Can

be combined with a DYNAPRO lanyard to create a lanyard with energy absorber. • Marked with a unique serial number and labelled to accommodate personal markings as well as a QR code to assist traceability.

• Easy

Réf : BLDA

gr

185 g

DYNAPRO-AIR LIFE LINE Fall arrest lanyard with integral energy absorber (EN355 + EN 362) for progression on a fixed line. STRONG POINTS • ABSORB’AIR

shock absorber integrated with the DYNAPRO lanyard. with an AIR SMITH 3-MATIC steel connector for connection to a working line trolley or directly to its cable, as well as a O’LIGHT 3-MATIC connector for connection to the harness. • Sewn termination with reinforced eye to protect the rope. • Removable cover allows the inspection of termination stitches. • Supplied

• Marked

with a unique serial number and equipped with a label to accommodate personal markings as well as a QR code to assist traceability. • Length (including connectors and shock absorbers): 1.70m.

1.7 m gr

740 g

Réf : BLDPAL170

Stitching protected by a moulded cover

DYNAPRO-AIR V LIFE LINE V-shaped fall arrest lanyard with an integral energy absorber (EN355 + EN362). It is a lanyard for progression on a fixed line. It is well adapted for passing intermediate anchors on cables when there is no trolley on the working line. STRONG POINTS • ABSORB’AIR

absorber integral with V lanyard. with 2 AIR-SMITH 3-MATIC steel connectors for clipping to the cable and one O’LIGHT 3-MATIC for connecting to the harness. • Sewn termination with reinforced eye to protect the rope. • Removable cover allows the inspection of termination stitches. • Supplied

• Marked

with a unique serial number and equipped with a label to accommodate personal markings as well as a QR code to assist traceability. • Length (including connectors and shock absorbers): 1.70 m.

Réf : BLDPAVL170 gr

1150 g Stitching protected by a moulded cover 1.7 m

18


FALL ARREST LANYARDS

DYNAPRO-AIR HOOK Fall arrest lanyard with integrated energy absorber (EN355 + EN 362) designed for work environments with a fall risk. STRONG POINTS

absorber combined with DYNAPRO lanyard. with an AIR-HOOK LARGE connector to connect to the anchor point and an O’LIGHT 3-MATIC connector to connect to the harness. • Sewn terminations with reinforced eyes to protect the rope. • Removable cover allows the inspection of termination stitches. • Supplied

• Marked

with a unique serial number and equipped with a label to accommodate personal markings as well as a QR code to assist traceability. • Available in 3 lengths (including connectors and absorber): 1m / 1.5m / 2m.

LANYARDS

• ABSORB’AIR

1m gr

880 g Réf : BLDPAH100

1.5 m gr

920 g

Stitching protected by a moulded cover

Réf : BLDPAH150 gr

2m

970 g Réf : BLDPAH200

DYNAPRO-AIR V HOOK V-shaped fall arrest lanyard with integrated energy absorber (EN355 + EN362). Designed as a progression lanyard for work environments with a fall risk, it is well adapted to structures where anchor points are cables, bars or beams. STRONG POINTS • ABSORB’AIR

absorber combined with a V-shaped lanyard. lanyard with two symmetrical rope legs for progression using fall arrest techniques. • Supplied with 2 AIR-HOOK LARGE connectors to clip anchor points and an O’LIGHT 3-MATIC connector to connect to the harness. • Sewn terminations with reinforced eyes to protect the rope. • V-shaped

gr

•2

removable covers allow the inspection of termination stitches. with a unique serial number and equipped with a label to accommodate personal markings as well as a QR code to assist traceability. • Available in 2 lengths (including connectors and absorber): 1m / 1.5m • Marked

1450 g Stitching protected by a moulded cover

Réf : BLDPAVH100

1m

gr

Réf : BLDPAVH150

1530 g

1.5 m

DYNAPRO-AIR V HOOK XL V-shaped fall arrest lanyard with integrated energy absorber (EN355 + EN 362). Designed as a progression lanyard for work environments with a fall risk, the size of its connectors make it particularly suited to metal structures. STRONG POINTS • ABSORB’AIR

absorber combined with a V-shaped lanyard.

• V-shaped lanyard with two symmetrical rope legs for progression using

fall arrest techniques. Its 2 two metre legs allow fluid progression on large structures. • Supplied with 2 AIR-HOOK XL connectors that can clip anchors on large structures as well as an O’LIGHT 3-MATIC connector to connect to the harness.

• Sewn

terminations with reinforced eyes to protect the rope. removable covers allow the inspection of termination stitches. • Marked with a unique serial number and equipped with a label to accommodate personal markings as well as a QR code to assist traceability. • Available in 1 length (including connector and absorber): 2 m. •2

Stitching protected by a moulded cover

gr

2530 g

2m Réf : BLDPAVHL200

19


DYNAMIC LANYARDS

DYNAPRO Simple dynamic rope lanyard with sewn termination for work restraint. The dynamic characteristics of this lanyard are far superior to those of a traditional static lanyard. STRONG POINTS • Perfectly

adapted for work positioning at height. termination with reinforced eye to protect the rope as well as a PINCH to assist connector orientation. • Enhanced level of protection thanks to the use of a dynamic rope. • Sewn

gr

140 g

• Removable

cover allows the inspection of termination stitches. with a unique serial number and labelled to accommodate personal markings as well as a QR code to assist traceability.

• Marked

0.6 m Réf : BLDP60

gr

Stitching protected by a moulded cover

170 g Réf : BLDP100

gr

200 g Réf : BLDP150

1m

1.5 m

Strength: 2200 daN (kg)

DYNAPRO 8 Adjustable, dynamic rope lanyard with sewn terminations. The dynamic performance of this lanyard is greatly superior to that of traditional static lanyards. By making your own double fig-8 knot point of attachment to your harness you can obtain an assymetric ‘V’ lanyard adjusted to your needs. The lanyard thus made, in conformity with the notice, meets Standard EN 354. STRONG POINTS • Possible

to clip long or short. to pass intermediate anchors thanks to the 2 branches. • Sewn terminations fitted with a sleeve to protect the rope and a pinch to hold the karabiner in position. • Ability

gr

• Improved

security in the event of a fall (even of high factor) on the lanyard because of the use of dynamic rope. • Attach with a maillon rapide or directly onto the chest ring.

250 g

160 cm

Réf : BLDP8

Stitching protected by a moulded cover

1.6 m Strength: 2200 daN (kg)

DYNAPRO V Assymetric ‘V’ dynamic rope lanyard with sewn terminations. The dynamic performance of this lanyard is greatly superior to that of traditional static lanyards. STRONG POINTS • Perfectly

adapted to work at height and rescue. to clip-in short or long. • Ability to pass intermediate anchors thanks to the 2 branches. • Sewn terminations fitted with a sleeve to protect the rope and a pinch to hold the karabiner in position. • Ability

• Improved

security in the event of a fall (even of high factor)on the lanyard because of the use of dynamic rope. • Secure with a maillon rapide.

Strength: 2200 daN (kg) gr

160 g

0.3 m Stitching protected by a moulded cover

0.6 m Réf : BLDPV

20


LANYARDS

ADJUST’AIR Adjustable (EN358) work positioning lanyard in 12.5mm semi-static rope. STRONG POINTS • Ergonomic,

captive rope clamp. in 3 lengths: 2 m / 3 m / 5 m. • Sewn termination with reinforced eye to protect the rope. • Removable cover allows the inspection of termination stitches.

• Tubular

protection webbing for the rope. with a unique serial number and labelled to accommodate personal markings as well as a QR code to assist traceability.

• Marked

LANYARDS

• Available

Réf : 2m : BLSAA200 / 3m : BLSAA300 / 5m : BLSAA500

Stitching protected by a moulded cover

gr

2m 70 g

gr

3m 82 g

gr

5m 1020 g

PINCH System for securing the karabiner at the end of a rope or tape lanyard. Made out of particularly strong material, it ensures effective protection against abrasion when in contact with the rock.

Pinch Réf : BLP

BEAL_PRO_ACTION_2016©CRESPEAU

21


FALL ARREST, ROPE ACCESS AND WORK POSITIONING HARNESS

HERO PRO

EN 361 EN 358 EN 813

A fall arrest and work positioning harness. STRONG POINTS •6

mini gear loops can be used to attach AIR-LEASH or SUPER LEASH extendable tool holders or 3 tool pouches (TOOLBUCKET, GLASS-BUCKET or LONG TOOL BUCKET).

• X shaped shoulder straps increase comfort and ensure excellent

COMFORT

load distribution. • The semi-rigid leg loops and waist belt provides optimal pressure distribution where the body is in contact with the harness • The padded shoulder straps are held apart to minimise neck chafing • The waist belt, leg loops and shoulder straps are lined with breathable foam to improve comfort and to reduce perspiration.

ACCESSORIES

• The

• The

ERGONOMY

waist belt’s two lateral attachment loops can be folded back to minimise hindrance • The dorsal attachment point is made from steel. • Two opening quick release buckles (one per leg loop) enable the harness to be easily fitted even with cumbersome footwear. • Two lightweight loops on the shoulder straps allow the attachment of accessories or storage of scaffolding hooks. • 4 large, pre-shaped gear loops are positioned around the waist belt to easily accommodate all equipment.

Size

Weight (g)

TRACEABILITY

Waist belt (cm)

Leg loop (cm)

Torso circumference (cm)

Stature (cm)

Chest height (cm)

S

2065

70-90

50-65

70-100

155-175

55-70

M-L

2125

80-105

55-65

80-120

170-185

65-80

XL

2230

90-130

60-70

100-140

180-210

75-85

Ref: S : BHPH1 M-L : BHPH2 XL : BHPH3

22

rear of the waist belt contains an area to allow personal marking such as your company’s name, as well as a QR code which allows a personal identifier to be generated (your name and unique ID).


FALL ARREST, ROPE ACCESS AND WORK POSITIONING HARNESS

HERO PRO HOLD UP

EN 361 EN 358 EN 813

EN 567 : 2013 diameter 8-13mm EN 12841 : 2006-B diameter 10-13mm 100kg

A fall arrest and work positioning harness with ascender to aid rope ascents. The harness is equipped with the HOLD UP compact chest ascender that is optimised for ascending ropes. The HOLD UP is designed to stay parallel to the user’s body allowing the rope to slide easily through the device, making it particularly user friendly. STRONG POINTS

COMFORT

•A

load distribution. • The semi-rigid leg loops and waist belt provides optimal pressure distribution where the body is in contact with the harness. • The padded shoulder straps are held apart to minimise neck chafing. • The waist belt, leg loops and shoulder straps are lined with breathable foam to improve comfort and to reduce perspiration.

ACCESSORIES

• The

ERGONOMY

waist belt’s two lateral attachment loops can be folded back to minimise hindrance • The dorsal attachment point is made from steel. • Two opening quick release buckles (one per leg loop) enable the harness to be easily fitted even with cumbersome footwear. • A FLAT LINK connector allows the shoulders straps to be easily connected to the lower part of the harness and is compatible with the HOLD UP chest ascender. Its flat working surface ensures the webbing is properly seated.

removable elasticated strap helps to ensure correct positioning of the ventral ascender. • Two lightweight loops on the shoulder straps allow the attachment of accessories or storage of scaffolding hooks. • 4 large, pre-shaped gear loops are positioned around the waist belt to easily accommodate equipment. • 6 mini gear loops can be used to attach AIR-LEASH or SUPER LEASH extendable tool holders or 3 tool pouches (TOOLBUCKET, GLASS-BUCKET or LONG TOOL BUCKET).

HARNESS

• X shaped shoulder straps increase comfort and ensure excellent

Size

Weight (g)

• The

TRACEABILITY

rear of the waist belt contains an area to allow personal marking such as your company’s name, as well as a QR code which allows a personal identifier to be generated (your name and unique ID).

Waist belt (cm)

Leg loop (cm)

Torso circumference (cm)

Stature (cm)

Chest height (cm)

S

2155

70-90

50-65

70-100

155-175

55-70

M-L

2215

80-105

55-65

80-120

170-185

65-80

XL

2320

90-130

60-70

100-140

180-210

75-85

NEW

Ref: S : BHPHO1 M-L : BHPHO2 XL : BHPHO3

23


WORK POSITIONING AND ROPE ACCESS HARNESS

SHAOLIN

EN 358 EN 813 (EN361 With a torso)

A lightweight fall arrest and work positioning harness.

NEW

STRONG POINTS •

This harness benefits from new technology in the PRO range: WEB CORE technology provides exceptional levels of comfort thanks to optimal pressure distribution on hips and thighs. WEB CORE is a wide, thin and lightweight piece of webbing laser cut to the shape of the harness. This results in a more compact, lightweight and above all more comfortable harness.

SHAOLIN + AIR TOP

LIGHT • Its

ergonomic construction allows a large range of movement. The low position of the ventral attachment point yields maximum progression when ascending ropes, whilst its large diameter provides the space for multiple connection to be made i.e. ascenders, connectors, descender and lanyards. • Two ways of attaching equipment: - A large ring provides the space for multiple karabiners and lanyards to be connected and accessed easily during a rescue. - Two textile attachment points for connecting lanyards metallic devices on both sides of the ring. • 2 lateral attachment points EN 358. • 1 dorsal attachment point for winching. • A handle can be fitted at the back for rescue use. • 5 gear organisers, 4 gear loops and 6 fabric loops to connect parts of the WORK STATION range. • Replaceable rear elastics on leg loops. •

ERGONOMY

Ref: S : BHPSH1 M-L : BHPSH2 XL : BHPSH3

SHAOLIN + YPSILON

• Traceability

TRACEABILITY

via an identification area with QR code which allows a personal identifier to be generated (your name and unique ID). • Compatible with the AIR TOP and YPSILON chest harness to create a full body harness EN 361.

USES

Work at height, rescue, route setting, and high ropes course technicians.

Size

Weight (g)

Waist circumference (cm)

Leg loop circumference (cm)

S

700

60-100

42-60

M-L

760

72-120

52-70

XL

810

85-140

57-75

WEB-CORE

HERO SIT

EN 358 EN 813 (EN361 With a torso)

Work positioning and rope access harness. STRONG POINTS • The

COMFORT

semi-rigid leg loops and waist belt assure optimal pressure distribution where the body is in contact with the harness. • The waist belt and leg loops are lined with a breathable foam, increasing comfort and reducing perspiration.

HERO SIT + AIR TOP

• The

ERGONOMY

waist belt’s two lateral attachment loops are articulated to minimise hindrance. • Two double action opening quick release buckles (one per leg loop) enable the harness to be easily fitted even with cumbersome footwear. • The

rear of the waist belt contains an area to allow personal marking such as your company’s name in addition to a QR code which allows a true identifier to be generated (your name and unique ID).

TRACEABILITY

large, pre-shaped gear loops are positioned around the waist belt to easily accommodate all equipment. • 4 mini gear loops can be used to attach ‘AIR-LEASH’ extendable tool holders or 2 ‘TOOL-BUCKET’ tool pouches. ACCESSORIES

Ref: S : BHPHS1 M-L : BHPHS2 XL : BHPHS3

•3

24

Size

Weight (g)

Waist circumference (cm)

Leg loop circumference (cm)

S

1437

70-90

50-65

M-L

1478

80-105

55-65

XL

1568

90-130

60-70

HERO SIT + YPSILON


WORK POSITIONING AND ROPE ACCESS HARNESS

AIR TOP

EN 361, EN 12 277 type D

Adjustable chest harness with figure of 8 shape for use with a HERO SIT or SHAOLIN sit harness. This comfortable harness ensures the user remains in an upright position during a fall.

AIR TOP + SHAOLIN

STRONG POINTS

• Figure of 8 shape provides freedom of movement and distributes pressure around the chest evenly. SHAPE

• 2 adjustment buckles to adjust the length of the shoulder straps. • A single adjustment buckle allows the sternal attachment point to be correctly positioned in relation to the user, regardless of their physique. • A reinforced webbing fall arrest attachment point is ideal in confined spaces allowing progression without hindrance. • Can easily be fitted with an elastic positioning strap for the chest ascender. • Large elastic retainers help tidy the chest ascender’s webbing.

AIR TOP + HERO SIT

HARNESS

ERGONOMY

NEW

USES

Work at height, industry, rescue, route setting

Size

Weight (g)

Waist circumference (cm)

one size

345

60-140

Ref: BHPAT

YPSILON

EN 361

Lightweight and adjustable Y-shaped chest harness compatible with HERO SIT and SHAOLIN sit harnesses. Comfortable and easy to fit, it ensures the user remains in an upright position during a fall. YPSILON + SHAOLIN

STRONG POINTS

• Lightweight • Adjustments are made using a front buckle at shoulder height and a dorsal rear buckle.

NEW

SHAPE

ERGONOMY

• The shoulder strap slides through the sternal D-ring which provides a large range of movement and ensures ease of fitting. • A slight narrowing of the shoulder straps prevents chafing around the neck. • Multiple attachment points for the elasticated chest ascender retainer. • Two reinforced loops per shoulder strap can be used to attach scaffolding hooks.

YPSILON + HERO SIT

USES

Work at height, industry, rescue

Size

Weight (g)

Waist circumference (cm)

one size

370

60-140

Ref: BHPY

AIR SIT Stable and comfortable suspended work seat for rope access.

STRONG POINTS • Triangulation

of the 2 lateral attachment points assists stability. and breathable comfort padding. • 2 plastic lateral gear loops are pre-shaped for ease of clipping. • 4 mini gear loops are equally available on the sides to attach ‘AIR-LEASH’ extendable tool holders or 2 ‘TOOL-BUCKET’ tool pouches. • A ring under the seat can be used to attach a bag. • Durable

Ref: BSAS

25


FALL ARREST AND WORK POSITIONING HARNESS

SYNCRO

EN 358 EN 361

Particularly lightweight work positioning and fall arrest harness adapted specifically for industrial and energy related work environments. STRONG POINTS

X shaped shoulder straps increase comfort and ensure excellent load distribution. • The semi-rigid leg loops and waist belt assure optimal pressure distribution where the body is in contact with the harness. • The padded shoulder straps with well-placed retainers minimise neck chafing. • The waist belt, leg loops and shoulder straps are lined with a breathable foam, increasing comfort and reducing perspiration.

• The

COMFORT

TRACEABILITY

• Two fixed loops on the shoulder straps allow the attachment

ACCESSORIES

the lateral and dorsal attachment points consist of sewn rope rings to reduce weight, noise and damage to delicate surfaces or coatings, particularly when ascending inside a wind turbine’s tower. • The rear attachment point consists of a sewn rope ring to reduce weight and noise. Its red colour promotes efficient identification in emergencies. • Two double action opening quick release buckles (one per leg loop) enable the harness to be easily fitted even with cumbersome footwear. • The sternal webbing strap with fall arrest attachment point can be easily opened and closed to assist harness fitting. Size

Weight (g)

1 (S-M-L) 2 (L-XL)

Torso circumference (cm)

Stature (cm)

45-65

80-120

160-180

55-75

60-75

90-140

175-210

65-85

Waist belt (cm)

Leg loop (cm)

1700

65-105

1750

100-130

Ref. S1 : BHPSYN1 S2 : BHPSYN2

26

of an accessory like a radio or storage of scaffolding hooks. large, pre-shaped gear loops are positioned around the waist belt to easily accommodate all equipment. • 6 mini gear loops can be used to attach ‘AIR-LEASH’ extendable tool holders or 3 ‘TOOL-BUCKET’, ‘LONG TOOL BUCKET‘ or ‘GLASS BUCKET‘ tool pouches. •4

• Both

ERGONOMY

rear of the waist belt contains an area to allow personal marking such as your company’s name in addition to a QR code which allows a true identifier to be generated (your name and unique ID).

Chest height (cm)


LIFE JACKET

TYPHOON

ISO 12402-2 ISO 12402-3

Inflatable lifejacket designed to complete a full-body harness for industrial maintenance and work at height in risk to aquatic environments. Compatible with the BEAL PRO harnesses, it automatically inflates on contact with water, and can also be operated manually. The TYPHOON is available in two levels of buoyancy: 150 newtons or 275 newtons. SPECS

• The lifejacket gives access to the fall arrest points, suspension and positioning points of the harnesses • Easily adjustable on the harness • Easy fitting and maintenance of the jacket

• • • • •

SAFETY JACKET

USE

• In addition to BEAL PRO harness : BEAL : HERO PRO, SYNCRO, STYX, HERO SIT + AIR TOP, HERO SIT + YPSILON, SHAOLIN + AIR TOP et SHAOLIN + YPSILON, it can be used for maintenance of sewage sites, sewer workers , offshore platform operators etc …

Firing pin can be operated manually or automatically Homologation CE / ISO 12402-2 or CE / ISO 12402-3 Buoyancy 150 newtons or 275 newtons Personalisable, washable cover designed for industrial use Asymmetrical bladder (balloon) ensures the user is returned to the surface and holds their head above water.

HARNESS

COMFORT

STRONG POINTS

Size

Weight (g)

Buoyancy

Standard

U

1295

150 newtons

CE/ISO 12402-3

U

1500

275 newtons

CE/ISO 12402-2

NEW Ref. 150 newtons: BHPT 275 newtons: BHPT2

27


FALL ARREST HARNESS

STYX ERGONOMY TRACEABILITY ACCESSORIES

Lightweight and compact fall arrest harness with two attachment points: 1 sternal and 1 dorsal. STRONG POINTS • Different coloured leg loops help distinguish them from the shoulder

straps and so accelerate fitting. sleeveless jacket made from breathable materials facilitates easy fitting of the harness. • The dorsal section contains an area to allow personal marking such as your company’s name in addition to a QR code which allows a true identifier to be generated (your name and unique ID). • 4 mini gear loops can be clipped directly or used to attach ‘AIRLEASH’ extendable tool holders or 2 ‘TOOL-BUCKET’. •A

Size

Weight (g)

Leg loop (cm)

Chest height (cm)

Torso circumference (cm)

Stature (cm)

U

770

40-80

55-80

80-140

160-195

Ref. BHPST

STYX JACKET ERGONOMY TRACEABILITY

Lightweight and compact jacket style fall arrest harness with two attachment points: 1 sternal and 1 dorsal. STRONG POINTS •A

sleeveless jacket made from breathable materials facilitates easy fitting of the harness. • The dorsal section contains an area to allow personal marking such as your company’s name in addition to a QR code which allows a true identifier to be generated (your name and unique ID). .

Size

Weight (g)

Leg loop (cm)

Chest height (cm)

Torso circumference (cm)

Stature (cm)

U

1062

40-80

55-80

80-140

160-195 Ref. BHPSTJ

28


FALL ARREST HARNESS

STYX RESCUE ERGONOMY TRACEABILITY

Lightweight and compact fall arrest harness with two attachment points: 1 sternal and 1 dorsal. STRONG POINTS • Different coloured leg loops help distinguish them from the shoulder

straps and so accelerate fitting. dorsal section contains an area to allow personal marking such as your company’s name in addition to a QR code which allows a true identifier to be generated (your name and unique ID).

HARNESS

• The

Size

Weight (g)

Leg loop (cm)

Chest height (cm)

Torso circumference (cm)

Stature (cm)

U

770

40-80

55-80

80-140

160-195 Ref. BHPSTR

STYX RESCUE JACKET ERGONOMY TRACEABILITY

Lightweight and compact jacket style fall arrest harness with two attachment points: 1 sternal and 1 dorsal. STRONG POINTS • UA

sleeveless jacket made from breathable materials facilitates easy fitting of the harness. • The dorsal section contains an area to allow personal marking such as your company’s name in addition to a QR code which allows a true identifier to be generated (your name and unique ID).

Size

Weight (g)

Leg loop (cm)

Chest height (cm)

Torso circumference (cm)

Stature (cm)

U

1062

40-80

55-80

80-140

160-195 Ref. BHPSTJR

TRI-ANGEL Evacuation triangle for vertical rescues.

TRACEABILITY

STRONG POINTS • Straightforward

positioning using 2 adjustable straps. straps, which are a different colour to the rest of the triangle, assist with both the ease and speed of deployment of the TRI-ANGEL onto the casualty. • The TRI-ANGEL adjusts in size to match the casualty using a webbing positioning scale with 3 settings. • Marked with a unique serial number. • Includes an area to allow personal marking such as your company’s name in addition to a QR code which allows a true identifier to be generated (your name and unique ID). • The

Weight: 747 g Ref. BHPTA

29


HELMET FOR WORK AT HEIGHT AND RESCUE MERCURY Hybrid helmet consisting of an ABS shell complimented by a polystyrene liner to promote efficient energy absorption during an impact. STRONG POINTS • Micro-adjustable

thanks to a precise adjustment dial. shell design optimises comfort and protection. • Excellent ventilation. • 4 headlamp clips are integrated into the shell. • Side slots for ear protectors.

• Chin

strap withstands more than 50 daN to ensurethe helmet remains secured during an impact. • Magnetic chin strap buckle facilitates fitting and undoing even with gloves or a single hand. • Internal comfort padding is removable and machine washable.

• Outer

Weight (g)

Circumference mini (cm)

Circumference maxi (cm)

432

50

62

BKFM

Removable foam of comfort

Ref: BKM.O

Ref: BKM.R

Ref: BKM.W

PELTOR ADAPT Ear defender adaptors for MERCURY helmet > Ear defender adaptor with bayonet system > Compatible with MERCURY helmets

Ref: BKPAM

30


31 HELMET / METAL


LOCKING CONNECTOR O’LIGH T Symmetrical aluminium oval shaped connector for use with equipment with swivelling side plates such as pulleys, rope clamps, mobile fall arrest devices, etc… 61 mm

STRONG POINTS

lock system. • Individual serial number. • Keylock system.

111 mm

• Screw

17 mm

Major Axis Strength

Minor Axis Strength

22 kN

8 kN

Open Gate Strength

Weight

6 kN

74 g

Ref: BMCLOL

O’LIGH T 3-MATIC Symmetrical aluminium oval shaped connector for use with equipment with swivelling side plates such as pulleys, rope clamps, mobile fall arrest devices, etc… 61 mm

STRONG POINTS

action 3-MATIC locking system. serial number. • Keylock system. • Individual

111 mm

• Triple

17 mm

Major Axis Strength

Minor Axis Strength

22 kN

8 kN

Open Gate Strength

Weight

8 kN

82 g

Ref: BMCLOL3

BE LINK Asymmetrical aluminium connector for lanyards or for use with belay devices. The asymmetrical shape helps to guide the device towards the connector’s apex. 66 mm

STRONG POINTS

lock system. serial number. • Keylock system. • Individual

108 mm

• Screw

20 mm

Major Axis Strength

Minor Axis Strength

26 kN

8 kN

Open Gate Strength

Weight

7 kN

65 g

Ref: BMCLBLN

BE LINK 3-MATIC Asymmetrical aluminium connector for lanyards or for use with belay devices. The asymmetrical shape helps to guide the device towards the connector’s apex. 66 mm

STRONG POINTS

action 3-MATIC locking system. serial number. • Keylock system. • Individual

108 mm

• Triple

20 mm

Major Axis Strength

Minor Axis Strength

26 kN

8 kN

Open Gate Strength

Weight

7 kN

65 g

Ref: BMCLBLN3

BE LOCK Symmetrical aluminium screw gate connector with large capacity and opening to accommodate multiple items. Its generous loading surface and HMS shape facilitate its use with Clove and Italian hitches. 76 mm

• Screw

lock system. serial number. • Keylock system.

121 mm

STRONG POINTS 22 mm

• Individual

Major Axis Strength

Minor Axis Strength

26 kN

8 kN

Open Gate Strength

Weight

8 kN

86 g

Ref: BMCLBL

BE LOCK 3-MATIC Symmetrical aluminium screw gate connector with large capacity and opening to accommodate multiple items. Its generous loading surface and HMS shape facilitate its use with Clove and Italian hitches. 76 mm

STRONG POINTS 22 mm

121 mm

action 3-MATIC locking system. serial number. • Keylock system.

26 kN Open Gate Strength

• Triple

• Individual

Major Axis Strength

8 kN

Minor Axis Strength

8 kN Weight

100 g

Ref: BMCLBL3

FLAT LINK Symmetrical, trapezoidal shaped aluminium karabiner designed to connect the top and bottom parts of a full body harness. Its flat working surface ensures the webbing is properly seated. The FLAT LINK was designed to be compatible with the HOLD UP chest ascender. • Double

16 mm

71 mm

32

20 kN

5 kN 85 mm

action locking gate. • Individual serial number. • Keylock nose.

Major Axis Strength

Open Gate Strength

50 mm

STRONG POINTS

NEW

Ref: BMCLFL

Minor Axis Strength

10 kN Weight

81 g


LOCKING CONNECTOR O’SMITH Symmetrical oval shaped steel connector. STRONG POINTS • Screw

lock system. serial number. • Keylock system.

56 mm

• Individual

109 mm

17 mm

Major Axis Strength

Minor Axis Strength

30 kN

16 kN

Open Gate Strength

Weight

8 kN

179 g

Ref: BMCLOS

O’SMITH 3-MATIC Symmetrical oval shaped steel connector. STRONG POINTS • Triple

action 3-MATIC locking system. serial number. • Keylock system.

56 mm

• Individual

109 mm

17 mm

Major Axis Strength

Minor Axis Strength

30 kN

16 kN

Open Gate Strength

Weight

8 kN

198 g

Ref: BMCLOS3

High capacity asymmetrical steel connector with large opening to assist with connections to metal anchors. Its capacity allows it to accommodate multiple items. 73 mm

STRONG POINTS

lock system. • Individual serial number. • Keylock system.

114 mm

• Screw

25 mm

Major Axis Strength

Minor Axis Strength

52 kN

16 kN

Open Gate Strength

Weight

18 kN

251 g

METAL

AIR-SMITH

Ref: BMCLAS

AIR-SMITH 3-MATIC High capacity asymmetrical steel connector with large opening to assist with connections to metal anchors. Its capacity allows it to accommodate multiple items. 73 mm

STRONG POINTS

action 3-MATIC locking system. • Individual serial number. • Keylock system.

114 mm

• Triple

24 mm

Major Axis Strength

Minor Axis Strength

52 kN

16 kN

Open Gate Strength

Weight

18 kN

251 g

Ref: BMCLAS3

CONNECTOR AIR-HOOK LARGE Auto-locking aluminium connector with large opening. Ideal for connections to cables, bars and beams.

Major Axis Strength

22 kN 120 mm

Weight

STRONG POINTS • Individual

lock- unlocking trigger. serial number.

475 g

240 mm

• Ergonomic

60 mm

Ref: BMC60

AIR-HOOK XL Major Axis Strength

Auto-locking aluminium connector with very large opening. Ideal for connections to cables, bars and beams.

25 kN

165 mm

Weight

STRONG POINTS • Individual

lock- unlocking trigger. serial number.

110 mm

920 g

360 mm

• Ergonomic

Ref: BMC110

Working load limit

Breaking load (Kg)

Weight

1

1

STANDARD GALVA 8 mm

700

3500

77 g

BMMNZ08

2

STANDARD GALVA 10 mm

1100

5500

137 g

3

LONG OPENING GALVA 7 mm

500

2500

60 g

4

PEAR GALVA 10 mm

720

3600

185 g

5

DELTA GALVA 8 mm

550

2750

88 g

6

DELTA GALVA 10 mm

990

4500

153 g

7

MAILLON SEMI CIRCULAR 10 mm

990

4500

153 g

Name

2

3

4

BMMGOZ07

BMMNZ10

5

6

BMMDZ08

BMMPZ10

7 BMMSCZ10

BMMD10

33


LOCKING CONNECTOR TWIN GATE Twin Gate is a revolutionary concept for locking a karabiner, patented by Grivel/Simond It is incredibly simple and can be worked using just one hand. Unintentional opening is nearly impossible. In addition, the locking mechanism cannot become jammed. 2 versions are available: • A solid and wire gate combination which open in opposite directions. •Two solid gates which open in opposite directions.

TWIN AUTO BELAY Compact asymmetrical locking karabiner for use with a lanyard or belay device. Features the Twin-Gate concept with a second wire gate.

30 kN

USE

Ideal for use with a belay device or lanyard which are guided towards their correct position at the karabiner’s apex.

• TWIN

GATE Concept • High strength • KEYLOCK nose system • Excellent balance between strength and weight

Minor Axis Strength

11 kN

Open Gate Strength

9 kN

Weight 23 mm

57 g

Ref: BMCTAB

TWIN BELAY D Versatile mid-sized, asymmetrical HMS karabiner for use with single, half or twin ropes. Features the Twin-Gate concept with second wire gate. STRONG POINTS

GATE Concept strength • KEYLOCK nose system • High

Minor Axis Strength

70 mm

11 kN

Open Gate Strength

9 kN

Weight

69 g

98 mm

Belaying and abseiling

• TWIN

Major Axis Strength

NEW

EN 12275 H EN 362 B

TWIN GATE

30 kN

USE

62 mm

101 mm

STRONG POINTS

Major Axis Strength

NEW

EN 12275 B EN 362 B

TWIN GATE

24 mm

Ref: BMCTBD

TWIN BELAY PEAR

STRONG POINTS

29 kN

USE

Belaying and abseiling

• TWIN

Minor Axis Strength 71 mm

10 kN

Open Gate Strength

10 kN

Weight

83 g

20 mm

102 mm

GATE Concept • High strength • KEYLOCK nose system

Major Axis Strength

NEW

EN 12275 H EN 362 B

TWIN GATE

Versatile mid-sized, symmetrical HMS karabiner for us with single, half or twin ropes. Features the Twin-Gate concept with two gates that open in opposite directions.

Ref: BMCTBP

TWIN O An oval automatic locking karabiner designed for use with equipment with swivelling side plates such as pulleys and descenders. The TWIN O is equipped with the TWIN-GATE concept and its two opposing gates. The absence of a traditional locking barrel reduces the potential of the karabiner becoming incorrectly positioned.

Open Gate Strength

USE

Pulleys and pulley systems

• TWIN

GATE Concept • High strength • KEYLOCK nose system

Minor Axis Strength 58 mm

9 kN

8 kN

Weight 24 mm

86 g

Ref: BMTCO

TWIN GUIDE A unidirectional automatic locking karabiner. An internal wire gate prevents the karabiner from becoming inverted and means the load remains well positioned along the long axis, for example at the end of a lanyard. The TWIN GUIDE is equipped with the TWIN-GATE concept and its two opposing gates. The absence of a traditional locking barrel reduces the potential of the karabiner becoming incorrectly positioned.

Major Axis Strength

22 kN

GATE Concept strength

• KEYLOCK

nose system

Minor Axis Strength 73 mm

9 kN

Open Gate Strength

Weight

89 g

24 mm

Ref: BMTCG

TWIN SMITH CAPTIVE A large capacity and high strength (45kN) asymmetrical steel locking karabiner. The TWIN SMITH CAPTIVE features the TWIN-GATE concept with a second wire gate that opens in the opposite direction. STRONG POINTS

GATE Concept strength • KEYLOCK nose system • High

34

Particularly suited to clipping into anchors and fixed lines, or for arborist work restraint. Its removable captive bar holds the TWIN SMITH CAPTIVE in place on equipment it is clipped into.

NEW

EN 12275 H EN 362 B

Major Axis Strength

45 kN

Minor Axis Strength

18 kN

Open Gate Strength

17 kN Ref: BMCTSC

Weight

29 mm

116 mm

• TWIN

USE

117 mm

• TWIN

NEW

EN 12275 H EN 362

TWIN GATE

8 kN

STRONG POINTS • High

110 mm

STRONG POINTS

Major Axis Strength

24 kN

NEW

EN 12275 B EN 362 B

TWIN GATE

228 g 73 mm


35 METAL


PULLEY

Large single pulley with swivelling side plate. Stainless steel axle and washer. The sheave is mounted onto a bronze collar to promote a good level of efficiency. Maximum Ø ≤ 16 mm. EN12278: 1998. STRONG POINTS

Compatible diameter

Maximum load

Weight

max 16 mm

MBS 30 kN

270 g

• Unique

number. • High maximum working load.

Ref: BMP1

TRANS’FAIR 1B

bearings. serial number. • Swivelling side plate. • Individual

Intensive use in load transfers or pulley systems.

86 mm Compatible diameter

Maximum load

Weight

max 16 mm

MBS 30 kN

280 g

Ref: BMP1B

TRANS’FAIR 2

83 mm

Large double pulley with swivelling side plate well suited for use in pulley systems. Stainless steel axle and washer. The sheave is mounted onto a bronze collar to promote a good level of efficiency. Maximum Ø ≤ 16 mm. EN12278: 1998. STRONG POINTS

number. • Swivelling side plate.

Compatible diameter

Maximum load

Weight

max 16 mm

MBS 30 kN

476 g

150 mm

• Ball

USE

NEW

118 mm

Highly efficient single pulley with swivelling side plate and ball bearing mounted sheave. Its swivelling action allows the pulley to be positioned anywhere along the rope, whilst the ball bearings ensure maximum efficiency and durability. Ideal for intensive use with large rope diameters. Stainless steel axle and washers. STRONG POINTS

118 mm

83 mm

TRANS’FAIR 1

• Unique

Ref: BMP2

TRANS’FAIR 2B

• Ball

bearings serial number • Swivelling side plate • Individual

Intensive use in load transfers or pulley systems

Maximum load

Weight

max 16 mm

MBS 30 kN

500 g

Ref: BMP2B

45 mm

TRANS’FAIR FIXE Compact and lightweight pulley with fixed side plates. Stainless steel axle and washer. The sheave is mounted onto a bronze collar to promote a good level of efficiency. Maximum Ø ≤ 12 mm. EN12278: 2007. STRONG POINTS • Unique

number.

• Lightweight.

Compatible diameter

Maximum load

Weight

max 12 mm

MBS 20 kN

90 g

Ref: BMPF

TRANS’FAIR FIXE B Pulley with fixed side plates and ball bearings for optimal efficiency. Its compact and lightweight nature make it easy to handle. Allows a pulley system to be set up by adding a component such as an ascender. Maximum Ø max ≤ 13 mm. EN12278: 1998.

45 mm

Compatible diameter

Maximum load

Weight

max 13 mm

MBS 22 kN

120 g

STRONG POINTS • Unique •

36

number. Ball bearings.

150 mm

USE

83 mm Compatible diameter

82 mm

STRONG POINTS

NEW

Ref: BMPFB

82 mm

Highly efficient double pulley with swivelling side plates thanks to a ball bearing mounted sheave. Its swivelling action allows the pulley to be positioned anywhere along the rope, whilst the ball bearings ensure maximum efficiency and durability. Ideal for intensive use with large ropes diameters. Stainless steel axle and washers.


PULLEY TRANSF’AIR TWIN B

NEW

A double pulley with two inline stainless steel sheaves mounted on ball bearings. The TRAINSF’AIR Twin B is specifically designed for intensive use on rope or wire zip lines.

CABLE

STRONG POINTS

ROPE

• Two

stainless steel in-line sheaves increase stability. • Ball bearings ensure consistent efficiency regardless of the user’s weight. • Can accommodate up to 3 karabiners. • Individual serial number.

Compatible diameter

Maximum load

Weight

max 13 mm

MBS 30 kN

282 g

Compatible diameter

Maximum load

Weight

max 11 mm

MBS 20 kN

120 g

108 mm

Ref: BMPTB

USE 76 mm

Rope or wire zip lines

Compact and lightweight pulley with swivelling side plate. Stainless steel axle and washer. The sheave is mounted onto a bronze collar to promote a good level of efficiency. Maximum Ø ≤ 11 mm. EN12278: 1998. 68 mm STRONG POINTS • Unique

number. side plate.

Ref: BMPMINI

80 mm

• Swivelling

METAL

TRANSF’AIR MINI

RIGGING PLATE AND SWIVEL AIR-PORT 4 Aluminium rigging plate which can accommodate 4 connectors. 85,2 mm STRONG POINTS

mm holes allow connectors with locking barrels to be inverted easily. • Individual serial number.

85,4 mm

• 20

Compatible diameter

Maximum load

MBS 45 kN WLL 9 kN

23.5 mm 20 mm

Weight

92 g

Ref: BMAP4

AIR-PORT 8 Aluminium rigging plate which can accommodate 8 connectors. STRONG POINTS • 20

mm holes allow connectors with locking barrels to be inverted easily. • Individual serial number.

Compatible diameter

Maximum load

MBS 45 kN WLL 9 kN

23.5 mm 20 mm

Weight

188 g 173,6 mm

Ref: BMAP8

84,5 mm

TWIST’AIR B Compact aluminium swivel with ball bearings to optimise performance even when loaded. 39 mm

• Individual

serial number. • Ball Bearings.

84 mm

STRONG POINTS

Compatible diameter

Maximum load

Weight

MBS 22 kN WLL 4 kN

18 mm

88 g

Ref: BMSW

37


FALL ARREST MONITOR

stop

11 mm

Aluminium mobile fall arrest device with swivelling side plate. STRONG POINTS • Mobile

fall arrest device with camming action. Cam function reduces abrasion to the rope when activated. • Meets the requirements of the following standards: EN 353-2, EN 12841-A 100 Kg diameter 11-13 mm (EN1891). • Rescue : maximum 200 kg, ø11-13 mm. • Swivelling side plate allows for ease of installation on the rope. • A lateral brake converts the MONITOR into a rope clamp for work positioning. • Easily locks as a result of a fall. • Easily follows the operator both during ascent and descent. • Marked with a unique serial number. • The MONITOR can be complimented with a MOBILE-LANYARD and its 2 attachment points.

Ref: BMFAM

GO

MOBILE-LANYARD Lanyard with 2 attachment points. The MOBILE-LANYARD is certified to work with the MONITOR mobile fall arrest device, enabling it to be positioned away from the operator. Allows the operator to create a short or longer link dependant on their needs: Short link for work on a gentle slope or to limit the length of a fall (20 cm). Longer link to distance the rope from the operator and to gain freedom of movement (40 cm). STRONG POINTS • Includes

two PINCH’s to ensure the correct orientation of the connector at its extremity. • Marked with a unique serial number. Strength: 2200 daN (kg)

Ref: BFAL

AIR-KIT 11 MM

stop

11 mm

Specific kit to create a mobile fall arrest system (EN 353-2 and EN12841-A 100 Kg) especially adapted to vertical work or work on inclined surfaces.

KIT INCLUDES •A • •

MONITOR mobile fall arrest device. A MOBILE-LANYARD with 2 positions: 20 cm and 40 cm. 2 O’LIGHT 3-MATIC connectors to attach the lanyard to both the MONITOR and the harness. Connectors: two O’LIGHT 3-MATIC and one BE LOCK 3-MATIC.

• • •

A length of rope 10 m / 15 m / 20 m / 30 m / 50 m / 60 m with a 11 mm diameter with sewn termination protected by a reinforced eye. 1 BE-LOCK 3-MATIC connector to attach the rope to the anchor point.

STRONG POINTS • Removable

cover allows the inspection of termination stitches • Products marked with a unique serial number and equipped with a label to accommodate personal markings as well as a QR code to assist traceability. • 10 m and 30 m - Orange. • 15 m and 50 m - Blue. • 20 m and 60 m - Red.

Each length is represented by a colour for quick and efficient identification of both its length and diameter:

10 m BFAK11.10 30 m BFAK11.30

15 m BFAK11.15 50 m BFAK11.50 20 m BFAK11.20 60 m BFAK11.60

38


FALL ARREST HANDS UP

CE EN 567 : 2013, diameter 8-13mm CE EN 12841: 2006-B, diameter 10-13mm 100kg

Handled ascender with ergonomic design to aid rope ascents with one or two hands. STRONG POINTS

be used to compliment the HOLD UP chest ascender or any other ascender for rope ascents • Large lower attachment hole easily accommodates the connector for the AIR STEP foot loop. • The ascender’s shape allows it to be held with two hands when ascending rope: one on the side beneath the trigger and one above it. • The handle is reinforced to improve ergonomics and comfort. • Large lower attachment hole can accommodate multiple karabiners and maillons. • All-metal construction of the operating mechanism to increase durability • An ergonomic protruding lever facilitates cam operation.

NEW 110 mm BMBHAR

Positioning of hands

METAL

Weight: 265g

235 mm

• Can

HOLD UP

CE EN 567 : 2013 diameter 8-13mm CE EN 12841 : 2006-B diameter 10-13mm 100kg

A compact ventral ascender for ascending ropes STRONG POINTS

81,6 mm

attachment hole protrudes from the ascender’s body at a 90 degree angle. This ensures the device remains both upright and parallel to the user’s body and allows the rope to easily slide through the device. • Positioned low on the harness to maximise progression with every move. • All-metal construction of the operating mechanism to increase durability. • An ergonomic protruding lever facilitates cam operation. • Compatible with all PRO harnesses through the use of a FLAT LINK connector, which connects the harness to the ascender.

NEW

• The

74 mm

Weight: 90 g

BMHO

AIR-STEP Adjustable footloop with quick adjusting system around the foot for ascending fixed ropes with an ascender. STRONG POINTS • Quick

adjsuting system with ON / OFF function. In the ON position, the user’s foot stays locked in the footloop. In the OFF position, the adjustment system does not engage, meaning the user’s foot is not locked. • A large buckle facilitates adjustments of the footloop, even when wearing gloves. • A stiffener in the loop helps to place a foot inside it. • Reinforced with webbing to help protect against abrasion.

OFF

ON

USE • Gone

back up on rope

BSTEP

Weight: 75 g

39


DESCENDER D4 Steel auto-locking descender with anti-panic function designed for increased durability within a work at height or rescue environment. STRONG POINTS

safety features: the anti-panic function is triggered and stops the descent immediately when the user pulls the handle too abruptly; the descent is automatically stopped when the user lets go of the handle. • Thick metal in high friction areas helps to increase the device’s lifetime in high use environment. • The handle allows the rate of descent to be finely controlled and its 360 degree rotation facilitates its use. Its aluminium body is covered with a grip enhancing material. In addition, an audible clicking sound accompanies the handle’s rotation to help the user to identify the handle’s correct position. • The device is locked using a metal button which prevents it from accidentally opening whilst ascending a rope. • Movement along horizontal or low incline surfaces is made easy by simply controlling the cam with your thumb. • The D4’s maximum working load is 240 kg. It is therefore suitable for rescues with a two-man load, without having to introduce additional friction. • The D4 can be used with 10.5 to 11.5mm diameter ropes.

NEW

Handle rotation in use

•2

Initial position

Descent Moved back to original position

Anti-panic brake

Initial position Descent

USES

Ref: BMDD4

• Controlling

the descent • Easily move over horizontal or low incline surfaces • The façon instinctive refer to work positioning • Allows for short rope ascents.

Anti-panic brake

Weight

Max. load

Rope diameter

Speed of descent

Material (body)

Material (came)

Finish

Breaking load

Length (mm)

Width (mm)

Thickness (mm)

Anti-panic brake

Number of usersteurs

Operating temperature

655 g

240 kg

10,5/11,5 mm

2 m/s

Aluminum

Stainless steel

Anodisation

16kN (3597lbf)

140

82

98

Yes

2

Between -40° et +45°

AIR STOP Auto-block descender with anti panic function for a single rope. STRONG POINTS • Maximum

working load of 130 kg with 9 mm rope, and up to 200 kg with ropes from 10 to 12 mm. • Anti-panic function with 2 blocking positions. • The maximum authorised speed of descent is 2 m/s. • Useable on a wide spread of rope diametres from 9 to 12 mm (EN12841-C). • Long control lever for a more progressive feel. • Rope can be inserted into device without unclipping it. • Unique serial number. Ref: BMDAS

AIR FORCE 8 Classic, robust and easy to use belay device. It is compatible with a large range of rope diameters whether single, double or twin. The friction can easily be varied whatever the condition of the ropes (frozen, wet, different diameters…).

Ref: BMDAF8

40


LADDER LADDER Metal ladder with aluminium rungs of 12.5 mm diameter and flexible 4 mm steel wire sides. STRONG POINTS • Each

end is fitted with swaged eyes and thimbles. • They can be joined together with maillon rapides. • Rung spacing is 25 cm.

• 4mm GALVA WIRE SWAGED EYE 5 m • 4mm GALVA WIRE SWAGED EYE 10 m

Ref: GALVA WIRE (5 m): BLL405 Ref: GALVA WIRE (10 m): BLL410

METAL

LADDER POU CH Cover to store rolled-up flexible ladders.

STRONG POINTS • Cover for ladders up to 10 m in length. • Made

of very sturdy PVC. colour.

• Luminous

Ref: BLLS10Y

YS SPREADER Y Extension to anchor a flexible metal ladder to a single point.

STRONG POINTS •4

mm galvanised steel wire. 1000 kg.

• Strength

Ref: BLLY4

41


BAGS PRO WORK 35 CONTRACT 35 litre transport bag – simple and effective.

Strength 100 kg

STRONG POINTS

• HF welding. • Reinforced base. • Metal adjustment buckles. • Identification window. • Side transport handle. Identification window Capacity

Weight

Height

Width

35 L

735 g

70 cm

30 cm Ref: BSAC.PW35C

PRO WORK 35 35 litre ergonomic transport bag including a waterproof external pocket.

Strength 100 kg

STRONG POINTS

• HF welding. • Reinforced base. • Ergonomic padded back. • Comfortable carrying straps. • Metal adjustment buckles. • Identification window. • W aterproof external pocket. • Side carrying handle

Personalisation window

Capacity

Weight

Height

Width

35 L

1080 g

70 cm

30 cm

Ref: BSAC.PW35

PRO WORK 45 Large 45 litre capacity transport bag specially adapted to heavy load carrying. A comfortable belt complements the ergonomic shoulder straps and a padded back. Waterproof exterior pocket and large under-lid pocket to cater for smaller personal items as well as lifetime record sheets. A transparent window aids in identification.

Strength 100 kg

STRONG POINTS

• HF welding. • Reinforced base. • Comfortable belt and straps. • Ergonomic back padding.

• Metal adjustment buckles. • Identification window. • W aterproof exterior pocket. • Side carrying handle.

Capacity

Weight

Height

Width

45 L

1525 g

60 cm

30 cm

Personalisation window

Ref: BSAC.PW45

PRO WORK 60 Very large 60 litre capacity transport bag with wide, stiff opening well adapted to rescue and large volume carrying requirements. A large waterproof transparent window allows you to see the sac contents. 2 very strong carrying handles help with handling heavy loads.

Strength 100 kg

STRONG POINTS

• Large rigid opening. • High Frequency welding. • Comfortable shoulder straps and belt.

42

• Ergonomic padded back. • Metal adjustment buckles.

Capacity

Weight

Height

Width

60 L

1825 g

75 cm

35 cm

Ref: BSAC.PW60


43 PACKS


BAGS COMBI PRO 40 Bag for professionals who require quick and easy access to their kit. Ref: BSAC.CP40

STRONG POINTS

• Benefits from BEAL’s ‘QUICK RELEASE’ system to accelerate access to the bag’s contents via two back panel sections. • Once opened, the bag can be folded out to reveal its neatly organised contents. • Multiple internal dividers and gear loops improve the kit’s layout. • A clear, external panel can be personalised to promote identification or used to list the bag’s contents. • Ergonomic shoulder straps and waist belt. • Sternum strap with emergency whistle. • Hauling loop at the top of the bag. • 1 lateral carry handle. • Reflective and fluorescent patches. • PVC 1100 g/m².

Capacity

Weight

Height

Width

38 L

1960 g

60 cm

21 cm

Usage example (bag sold without contents)

COMBI PRO 80 Bag for professionals who require a large volume, yet maintaining quick and easy access to their kit. STRONG POINTS

• Benefits from BEAL’s ‘QUICK RELEASE’ system to accelerate access to the bag’s contents via two back panel sections. • Once opened, the bag can be folded out to reveal its neatly organised contents. • Multiple internal dividers and gear loops improve the kit’s layout. • The COMBI PRO 80’s integrated rope bag contains a large ground sheet for immediate use of the rope without it twisting. • A red buckle identifies the bottom end of the rope, whilst a green buckle identifies the top end. • Lateral carry handle. • Generously sized ground sheet 60 cm x 80 cm. • Bag stores up to 60 m of rope. • A clear, external panel can be personalised to promote identification or used to list the bag’s contents. • Ergonomic shoulder straps and waist belt. • Sternum strap with emergency whistle. • Hauling loop at the top of the bag. • 1 lateral carry handle. • Reflective and fluorescent patches. • PVC 1100 g/m².

Capacity

Weight

Height

Width

45 L

2500 g

60 cm

26 cm

Usage example (bag sold without contents)

44

Ref: BSAC.CP80


BAGS PRO RESCUE 40 Rescue bag ideal for rapid access operations. Capable of taking 30 metres 12,5 mm of rope and basic hardware. STRONG POINTS

• Lid with transparent internal pocket to list contents. • A clear, external panel can be personalised to promote identification. • Adjustable shoulder straps. • W ebbing loop under the bag to be able to guide it from the bottom via a ‘tag line’. • 1 removable, internal daisy chain gear loop. • 1 lateral carry handle. • Robust 650 g/m² PVC material.

Capacity

Weight

Height

Width

40 L

900 g

60 cm

30 cm

Ref: BSAC.PR40

PRO RESCUE 60

PACKS

Rescue bag ideal for rapid access operations. Capable of taking 60 metres 12,5 mm of rope and basic hardware. STRONG POINTS

• Lid with transparent internal pocket to list contents. • A clear, external panel can be personalised to promote identification • Adjustable shoulder straps. • W ebbing loop under the bag to be able to guide it from the bottom via a ‘Tag line’. • 1 removable, internal daisy chain gear loop. • 1 lateral carry handle. • Robust 650 g/m² PVC material.

Capacity

Weight

Height

Width

60 L

1000 g

60 cm

35 cm Ref: BSAC.PR60

COMMANDE BAG Small capacity bag to hold small volume cords and ropes. STRONG POINTS

• Made of strong PVC. • Mesh base to promote drying. • Fitted with an eyelet for fastening a rope. • Strap to wear as a bandolier. • Volume: 9 litres. Capacity

Weight

Height

Width

9L

200 g

40 cm

15 cm

Ref: BSAC.COM

45


WORK STATION

WORK STATION

KEY FEATURES

Products within the WORK STATION range provide a complete solution for attaching and organising a work station. Different products from the range can be combined in a modular way to suit the work environment and users’ needs: builders, rope access technicians, craftsmen…

• Improves posture, reducing the potential for physical injury • Improves efficiency by reducing unnecessary movement • Enhances safety by reducing the possibility of dropping work tools • Reduces costs by a reduction in loss of work tools

GENIUS SIMPLE AND GENIUS TRIPLE Bags for carrying small tools and fastenings. The clic clac express closure stops the pocket contents getting lost. A magnetic plate allows temporary storage on the outside of the pocket. Available as a single pocket and an assembly of 3 with external tool carriers.

Clic clac system

STRONG POINTS

• Express closure. • Easy to attach to the harness. Type

• Rigid opening. • Magnetic plate. magnetic plate

Capacity

Weight

Height

Width

Max. load

Simple

1,5 L

180 g

25 cm

15 cm

50 kg

Triple

4,5 L

560 g

75 cm

45 cm

150 kg

MAGNETIC

GENIUS SIMPLE Ref: BSAC.G

MAGNETIC

magnetic plate

GENIUS TRIPLE MAGNETIC

Ref: BSAC.GT

GENIUS BUCKET A 20 litre bucket for carrying tools as well as small screws and fittings thanks to the 3 GENIUS CLIC CLAC pockets attached to the inside. The large opening with stiffener allows easy access to its contents. STRONG POINTS • Rigid carrying handle, with a minimum breaking • Easy, convenient access to load of 100kg tools. • CLIC CLAC pocket closure • Waterproof pocket. system. • Reinforced base. Capacity

Weight

Height

Width

Max. load

20 L

1085 g

40 cm

40 cm

50 kg

Genius Triple inside

Ref: BSAC.GB

GENIUS BUCKET PLUS A rigid 20 litre bucket for power tools such as a hammer drill, electric screwdriver or angle grinder; constructed with a clever ‘twist and fold’ function to reduce size for storage. Small gear loops on the outside and inside edges of the bag can be used to attach small CLIC CLAC pockets (TOOL BUCKET, GLASS BUCKET, LONG TOOL BUCKET) to organise your work station as you wish.

Ref: BSAC.GTB

STRONG POINTS

• Easy, convenient access to tools • Additional BUCKETs can be added • Rigid carrying handle with a minimum breaking load of 100kg

46

• ‘twist and fold’ function to reduce size for storage • Comfortable and adjustable shoulder strap helps to carry the bucket • Waterproof pocket • Reinforced base

Example with Tool Bucket

Capacity

Weight

Height

Width

Max. load

20 L

830 g

40 cm

40 cm

50 kg

NEW


WORK STATION BUCKET HAT A removable lid for the GENIUS BUCKET PLUS. Designed to protect items inside the GENIUS BUCKET PLUS from bad weather, dust etc. and to restrain the contents during transit and whilst hauling.

NEW

Fitted using clips.

Ref: BSAC.BH

GLASS BUCKET A small transparent bucket for organising bolts, screws and other small items whilst leaving contents easily visible. The CLIC CLAC system can be used to quickly close the bag and prevents loss of contents during transport. 2 external mini karabiners are fitted to connect the GLASS BUCKET to the GENIUS BUCKET, HERO PRO, SYNCRO and STYX harness or to the AIR-SIT work seat.

Capacity

Weight

Height

Width

1,8 L

115 g

14 cm

16 cm

Clic clac system

NEW

Ref: BSAC.GLB

Large size tool organiser bucket. The CLIC CLAC system can be used to quickly close the bag and prevents loss of contents during transport. Two mini external gear loops can be used to connect another BUCKET from BEAL’s range, an ATTRAC’TOOL magnet or an AIRLEASH extendable gear holder. Two external mini karabiners can be used to connect the LONG TOOL BUCKET to the HERO PRO, SYNCRO and STYX harness or to the AIR-SIT work seat.

Capacity

Weight

Height

Width

5L

215 g

35 cm

16 cm

Clic clac system

WORK STATION

LONG TOOL BUCKET NEW

Ref: BSAC.TBL

TOOL BUCKET Medium size tool organiser bucket. The CLIC CLAC system can be used to quickly close the bag and prevents loss of contents during transport. Two mini external gear loops can be used to connect the BEAL AIRLEASH extendable gear holder. Two external mini karabiners can be used to connect the TOOLBUCKET either to the HERO PRO, SYNCRO and STYX harness or to the AIR-SIT work seat.

Capacity

Weight

Height

Width

3,4 L

180 g

25 cm

16 cm

Clic clac system

Ref: BSAC.TB

47


WORK STATION AIR LEASH An extendable gear loop allowing tools to remain attached whilst in use. CONSISTS OF TWO SECTIONS

- An extendable spiral cord that attaches to the TOOL-BUCKET, GLASS BUCKET, LONG TOOL BUCKET, to the HERO PRO, SYNCRO and STYX harness, or the AIR-SIT work seat. - A gear loop that connects to the end of the spiral cord. This is designed to attach tools by means of a girth hitch or slipknot (it is important you select an attachment method appropriate for the specific tool). A reinforced webbing loop on the gear loop allows the tool to be clipped to the harness using a karabiner between uses The gear loops are available separately. All tools equipped with gear loops can thus be independently connected to the spiral cord.

Ref: BAL

Minimum length

Weight

Max length with 500g load

Maximum weight

45 cm

55 g

150 cm

500 g

SUPER LEASH A webbing based extendable gear loop allowing tools to remain attached whilst in use. One end can be used to attach tools by means of a girth hitch or slipknot (it is important you select an attachment method appropriate for the specific tool). The other end is equipped with a screwgate mini-karabiner for attachment to a tool pouch or gear loop. Minimum length

Weight

Max length with 10 kg load

Maximum weight

70 cm

70 g

115 cm

10 kg

Ref: BALS

48

NEW


WORK STATION ATTRAC’TOOL A magnetic plate that allows you to temporarily attach a leash secured tool to an appropriate metal surface.

NEW

The ATTRAC’TOOL can be fixed to a belt or shoulder strap of the HERO PRO harness or to the small gear loops of a harness, BUCKET or TOOL BELT. When fitted to a harness’ waist belt, a strap can be clipped around the thigh to stop the magnet from lifting up when picking up the tool. The strap can also be used to hang the ATTRAC’TOOL from a railing.

MAGNETIC

The ATTRAC’TOOL is modular and can be positioned both vertically and horizontally depending on the tools used and the working environment.

magnetic plate

WORK STATION

Ref: BAAT

TOOL BELT A waist belt with small gear loops for use with the TOOL BUCKET, LONG TOOL BUCKET, GLASS BUCKET, AIR LEASH and ATTRAC’TOOL. Webbing gear loops positioned around the belt allow the tools to be secured where convenient. The belt is reinforced to help spread out the weight of the tools on the waist.

Mini waist measurement

Maxi waist measurement

Width

Weight

70 mm

130 mm

50 mm

190 g

NEW

Ref: BATB

49


SLINGS NEW

DYNALOOP

EYE LOOP

EN 566 EN 354

EN 795B EN 354

A dynamic rope sling for work restraint. The dynamic characteristics of this sling are far superior to those of a traditional static lanyard or webbing sling.

A heavy duty tubular webbing sling with connecting buckle and wear indicator.

STRONG POINTS:

STRONG POINTS:

• Perfectly adapted for work positioning at height. • The use of a dynamic rope can improve the level of safety.

• Sewn termination protected by a heat shrink cover. • Breaking load 2200 daN • Marked with a unique serial number

• Strength 30kN • Strength 22kN when used in a girth hitch configuration • Double thickness webbing with a red webbing liner. The liner acts as a wear indicator: the product should be retired when the red webbing becomes visible. • Strength of the red webbing 22kN

60 cm / 55 g Ref : BLDL60

120 cm / 105 g Ref : BLDL120

wear indicator • Width 19mm • Material: Polyamide Available in 4 lengths: • 60 cm yellow • 80 cm green • 120 cm red • 150 cm black Ref 60 cm : BSL.60 Ref 80 cm : BSL.80 Ref 120 cm : BSL.120 Ref 150 cm : BSL.150

150 cm / 135 g Ref : BLDL150

ANCHOR STROP

EN 795B

Semi-temporary anchor made from 7 mm galvanised steel cable with plastic cover and 2 swaged terminations. STRONG POINTS:

• Available in 0.5 m and 1 m lenghts. • Allows making of semi-temporary anchors. • Strength 2500 kg. • Weight: 50 cm = 260 g - 1 m = 434 g.

Ref 50 cm : BMANCH050 Ref 1m : BMANCH100

POLYAMIDE FLAT SLINGS

EN 566 - EN 795B EN 354

Flat slings 18 mm

DYNEEMA FLAT SLINGS

EN 566 - EN 795B EN 354

Flat slings 10 mm idN

Strength: 2200 daN (kg)

50 cm 100 cm

30 cm 80 cm 175 cm

Individual idN number

150 cm

50

30 cm 40 cm 50 cm 60 cm 80 cm

100 cm 120 cm 150 cm 175 cm

Width

Standard

Flats

18 mm

Dyneema Flats

10 mm

EN 566 EN 795B EN 354

Certification

CE/UIAA

Individual idN number

40 cm 120 cm 60 cm

Ref 100 cm Grey/Black : BSA100.5 Ref 120 cm Orange/Black : BSA120.5 Ref 150 cm Red/Black : BSA150.5

Ref 40 cm Orange/Black : BSA40.5 Ref 60 cm Red/Black : BSA60.5 Ref 80 cm Blue/Black : BSA80.5

Type

idN

Strength: 2200 daN (kg)

120 cm

Ref 60 cm/Grey : BSAD10.60.5 Ref 120 cm/Purple : BSAD10.120.5

180 cm

240 cm

Ref 180 cm/Red : BSAD10.180.5 Ref 240 cm/Blue : BSAD10.240.5

Length

Weight

Breaking Load

Material

Conditioning

30 / 40 / 50 / 60 / 80 / 100 / 120 / 150 / 175 cm

60 cm = 48 g

2200 daN (kg)

Polyamide

5

60 / 120 / 180 / 240 cm

60 cm = 19,8 g

2200 daN (kg)

Dyneema

4


ACCESSORY CORDS AND WEBBING ACCESSORY CORDS

EN 564

Multi-use: BEAL accessory cords from 4 to 8 mm in diameter conform to the requirements of the UIAA and European Standards.

8 mm

7 mm

6 mm

Dyneema 5,5 mm

5 mm

4 mm

Diameter

Standard Certification

Weight per meter

Breaking Load

Material

Polyamide

4 mm

EN 564

CE/UIAA 11 g

400 daN (kg)

530 daN (kg)

5 mm

EN 564

CE/UIAA 19,5g

650 daN (kg)

930 daN (kg)

Polyamide

5,5 mm Dyneema

-

CE/UIAA 20 g

1800 daN (kg)

2000 daN (kg)

Sheath: Polyamide Core: Dyneema

6 mm

EN 564

CE/UIAA 23 g

810 daN (kg)

1200 daN (kg)

Polyamide

7 mm

EN 564

CE/UIAA 31 g

1170 daN (kg)

1680 daN (kg)

Polyamide

8 mm

EN 564

CE/UIAA 40 g

1530 daN (kg)

2200 daN (kg)

Polyamide

Ref 4mm x 120m : BC04.120.Y/GY/V Ref 5mm x 120m : BC05.120.Y/R

Ref 6mm x 120m : BC06.120.O/B Ref 7mm x 120m : BC07.120.O

Ref 8mm x 200m : BC08.200.R/B Ref 5,5mmx50m : BC055DYN.50

COMMANDE 7 MM - 30 M / 40 M / 60 M 7 mm cord with a sewn termination and karabiner on each end to guide rescues during the descent.

30 m

STRONG POINTS:

Ref: BCOM07.30

• Supplied with 2 karabiners secured by pinches. • The COMMANDE has an individual number. • Available in 30, 40 and 60 m lenghts.

40 m

Ref: BCOM07.40

60 m

Ref: BCOM07.60

WEBBING

EN 565

Type

Tubular

Flat

TUBULAR - 16 mm

Standard Certification

Weight per meter

Breaking Load

BST16.R

Material

Conditioning

16 mm

EN 565

CE/UIAA 31 g

1350 daN (kg)

1800 daN (kg) Polyamide

100 m

26 mm

EN 565

CE/UIAA 38 g

1500daN (kg)

2000 daN (kg) Polyamide

100 m

18 mm

EN 565

CE/UIAA 39 g

1600 daN (kg)

1800 daN (kg) Polyamide

100 m

26 mm

EN 565

CE/UIAA 35 g

1500 daN (kg)

1900 daN (kg) Polyamide

100 m

30 mm

EN 565

CE/UIAA 37 g

1600 daN (kg)

1950 daN (kg) Polyamide

100 m

45 mm

EN 565

CE/UIAA 55 g

2200 daN (kg)

2600 daN (kg) Polyamide

100 m

FLAT SUPER - 18 mm

BST16.G

TUBULAR - 26 mm

Width

SLINGS / ANCHORS

Tubular for their flexibility or flat for their durability, webbings are specifically used in belay slings. Cut webbing must always be tied with a tape knot.

FLAT 26 mm

BSP18.B BSP26UNI.BK

BSP18.GY BSP26UNI.F BSP18.O

BST26.B

BSP26UNI.G BSP18.R

BST26.R

BSP26UNI.Y

BSP18.BK

FLAT 45 mm BST26.BK

BSP45

51


ROPE PROTECTORS PROTECTOR

HOT-PROTECTOR

A rope can wear very rapidly over a sharp edge. To protect it, use the PROTECTOR, an ultra-solid rope protector made of two layers of coated material.

Made of glass fibre and aluminium, the HOT PROTECTOR is a patented rope protector resistant to heat, welding spatter, angle grinder, or a blowlamp flame - for a short time. Placement is facilitated by a magnetic closure.

Length: 70 cm Weight: 150 g

STRONG POINTS:

• Increased resistance to heat. • Easy to close thanks to its magnets. • Can be independently positioned on hot metal surfaces.

Length: 70 cm Weight: 180 g

Ref : BPRH

Ref : BPR70

MAGNETIC

MAGNETIC PROTECTOR

ROPE ARMOUR

Rope protector reinforced on both sides by a tape for better abrasion resistance. Installation facilitated by a magnetic closure.

A patented woven metal sheath, serving to protect the rope or lanyard from edges or sharp tools. This supple armour is much more durable and effective than conventional rope protectors. The ROPE ARMOUR has to be fixed around the rope, then positioned along it where protection is necessary: metal edges, roof corners, where there could be contact with angle grinders, drills… Compact in store or when positioning on the rope, it lengthens after being put in place.

STRONG POINTS:

• Increased abrasion resistance. • Easy to close thanks to its magnets. • May be independently positioned on metallic surfaces.

Length: 70 cm Weight: 260 g

MAGNETIC

STRONG POINTS:

52

Material: No. 65 galvanised steel Length deployed: 70 cm Length retracted: 16 cm Weight: 250 g

Ref : BPRAR

Ref : BPRM

• Metallic sheath very resistant to cutting. • Very light and supple. • Concertinas to reduce in size.


ROPE PROTECTORS ROPE DEFENDER Flexible sleeve made from coiled steel which serves to protect ropes from sharp edges. Thanks to its flexibility, it adapts to all angles. The spirals that are in contact with the edge squeeze together under the rope’s movement therefore ensuring total protection. The steel sleeve is virtually indestructible. Its reinforced rubber protecting cover exists as a separate part and may be easily replaced. STRONG POINTS:

• Virtually indestructible steel sleeve. • Removable protective cover.

Ref : BPRD

Length: 50 cm Weight: 730 g

EDGE GUARD

CROCO

Rope protector in stainless steel to protect a rope moving over a sharp edge.

Universal clamp to secure different rope protectors onto a rope. The CROCO replaces the use of cord with a Prusik loop and other temporary attachment methods. Fitted with a cable and a small karabiner, it attaches easily to any rope protector on the market. Being independent of the rope protector, the CROCO can be reused when the rope protector has to be replaced.

STRONG POINTS:

• Modulable - can be linked together with maillon rapides. • Secure with 2 cords (supplied). • 2 side plates prevent the rope from leaving the rail.

Weight: 300 g

STRONG POINTS:

• Adapts to all ropes from 9 to 12 mm. • Attaches quickly to all rope rotectors on the market. • Reusable. Ref : BPREG

Length: 23 cm Weight: 40 g

ROPE PROTECTORS

Ref : BPRCROCO

53


RESCUE KIT

RESCUE KIT

LADDER KIT

Allows the evacuation of a person by the outside of a building or from a pit or a ditch, up to a height limit of 30 m. Equally useful in interventions at height or on horizontal progressions to protect against falls.

Allows the same uses as the RESCUE KIT but with a carrying limit of 60 m.

PRO RESCUE 40

PRO RESCUE 60

STYX RESCUE

PRO RESCUE 40

STYX RESCUE

PRO RESCUE 60

TRI-ANGEL

TRI-ANGEL

x2

ERGO 12,5MM

ERGO 12,5MM

COMMANDE

COMMANDE

FLATSLING

30 m

FLATSLING

30 m

60 m

60 m

COMMANDE BAG

COMMANDE BAG

x5 150 cm

x5 150 cm

FLATSLING

AIR FORCE 8 O-LIGHT

FLATSLING

AIR FORCE 8

BE LOCK 3 MATIC

O-LIGHT

BE LOCK 3 MATIC

TRANS’FAIR FIXE

x1

x6

x1

x1

TRANS’FAIR FIXE

x5 80 cm

x1

COMBI PRO 40

x9

x1

x1

2x 5 80 cm

PRO RESCUE 80

STYX RESCUE

COMBI PRO 40

STYX RESCUE

COMBI PRO 80

USAGE EXAMPLE

USAGE EXAMPLE

TRI-ANGEL

TRI-ANGEL

x2

ERGO 12,5MM

ERGO 12,5MM

COMMANDE

COMMANDE

FLATSLING

30 m

FLATSLING

30 m

60 m

60 m

COMMANDE BAG

COMMANDE BAG

x5 150 cm FLATSLING

AIR FORCE 8 O-LIGHT

x5 150 cm FLATSLING

AIR FORCE 8

BE LOCK 3 MATIC

O-LIGHT

BE LOCK 3 MATIC

TRANS’FAIR FIXE

x1

54

x6

x1

x1

TRANS’FAIR FIXE

x5 80 cm

x1

x9

x1

x1

x5 80 cm


GLOVES AND ACCESSORIES ASSURE

EN 420 EN 388

ROPE MARKER BEAL has developed a special ink for marking ropes, in the middle as well as at the ends. This ink hardly stiffens the rope, is water resistant, and stands up to abrasion well. NB: it does not affect polyamide. The container has a small roller at the tip for better inking. With one container of ROPE MARKER you can make 30 marks of 5 cm.

Mitts, entirely in leather, reinforced palms. STRONG POINTS: • Ultra

supple, natural grain leather. for attachment to harness. • Reinforced palm. • Loop for karabiner clipping. • Leaves the fingertips free. • Loop

Ref: BGA.S / BGA. M / BGA. L / BGA. XL / BGA. XXL EN 420 (2003) General requirements for protective gloves: safety, comfort and dexterity EN 388 (2003) Protective gloves against mechanical hazards

Ref : BRM

ROPE BRUSH

2122

ASSURE MAX

EN 420 EN 388

Gloves entirely in leather, with reinforced palm. STRONG POINTS:

supple, natural grain leather. for attachment to harness. • Reinforced palm. • Loop for karabiner clipping.

A brush specifically created to clean ropes. Adapts easily to different diameters. Twist the brush onto the rope then run the rope through the brush while holding it firmly under water.

• Ultra • Loop

Ref: BRB

Ref: BGAM.S / BGAM. M / BGAM. L / BGAM. XL / BGAM. XXL EN 420 (2003) General requirements for protective gloves: safety, comfort and dexterity EN 388 (2003) Protective gloves against mechanical hazards

ROPE BAND

2122

Ref : BRT

RAPPEL GLOVES

10 m

EN 420 EN 388

All-leather gloves, reinforced where the rope runs, specially adapted for descending the rope. STRONG POINTS: • Reinforced

to limit wear from the sliding rope. • Thick full grain leather • Loop to clip the gloves to the harness.

MARKING TICKET KIT

Ref: BGR.S / BGR. M / BGR. L / BGR. XL / BGR. XXL EN 420 (2003) General requirements for protective gloves: safety, comfort and dexterity EN 388 (2003) Protective gloves against mechanical hazards

3244

ROPE TECH GLOVES Hybrid gloves, half-leather palms, breathable stretch fabric on the back.

EN 420 EN 388

half

The kit consists of non-rotting labels and heat-shrink sheath to allow you to replace old rope endings, but more importantly to let you establish your own rope traceability. The label is non-tear and waterproof, the heat-shrink cover is very abrasion resistant.

Size = 20mm

Ref: BRE

(x 50) <80°

STRONG POINTS: • Thin

leather on the inside fingers for greater dexterity. • The palm is reinforced precisely where the rope runs. • The stretch textile on the back of the hand aids breathability and avoids sweating. • Loop to clip the gloves to the harness.

Ref: BGRT.S / BGRT. M BGRT. L / BGRT. XL / BGRT. XXL 3343

ROPE CLEANER Non-aggressive detergent developed to clean ropes and harnesses easily. Will not damage polyamide – water temperature < 30° C.

The kit consists of non-rotting labels and heat-shrink sheath to allow you to replace old rope endings, but more importantly to let you establish your own rope traceability. The label is non-tear and waterproof, the heat-shrink cover is very abrasion resistant.

Size = 85mm (x 25) <80°

KITS / GLOVES & ACCESSORIES

EN 420 (2003) General requirements for protective gloves: safety, comfort and dexterity EN 388 (2003) Protective gloves against mechanical hazards

MARKING TICKET KIT XL

Ref: BREP

NFC CHIP

Ref: BRC

ROPE CUTTER

Ref: BCUT Ref: BNFC

55


LIGHTING

HEADLAMPS For professionals to have effective lighting in all circumstances a simple long and straight light beam does not suffice, as in many situations a broad and homogenous beam is equally required.

BEAL’S RANGE To better respond to the needs of some of the most demanding users, from electricians to rope access technicians, BEAL’s range uses multiple independent light sources on the majority of its models. In contrast to using a single light source, this solution allows for a source to be dedicated to an intended use. As a result some headlamp models have up to 3 independent light sources!

SOURCES Source N° 1 : A central LED, known as ‘FOCUS’, emits a far reaching and precise narrow beam. Source N° 2 : Lateral LEDs, known as ‘FLOOD’, emit light to allow comfortable and uniform peripheral vision without bright spots. Source N° 3 : Red LEDs, known as ‘RED’, allow for discreet lighting or efficient signalling in flashing mode. Every light source is thus dedicated to a particular use: ‘FOCUS’ to see far, ‘FLOOD’ for immediate surroundings and ‘RED’ for discretion in its constant mode or signalling in its flashing mode.

Individual Number

BEAL HEAD LAMPS ARE SEPARATED INTO 2 RANGES which indicate the key features of each one: • The L range - light and compact head torches • The F.F range - torches with a minimum of two light sources: ‘FOCUS’ and ‘FLOOD’ L. RANGE

The number after the range indicates the maximum output in lumen: L28: Light + 28 lumens. F.F. 120: FOCUS & FLOOD + 120 lumens. F.F. RANGE

FF210 R

56


LIGHTING

HEADLAMPS - SETTINGS MODES Every light source has multiple settings; in addition to a powerful and an economic setting some models also feature medium and flashing settings. • Maximum mode: the most powerful setting, providing an effective and intense output between 2 and 4 hours. • Medium mode: the most favourable setting offering a compromise between light output and energy management. • Economic mode: this setting, with an output between 5 and 6.5 lumens, generates minimal consumption for a very long burn time. • Flashing mode: this setting works on the central light source or RED source and helps to draw attention when needed. The combination of light sources and various modes allows for perfect adjustments to suit the needs of your night vision, which at the same time results in excellent energy management. • TOTAL POWER Mode: a combination of both Flood and Focus modes, thus providing with a zoom, long reach output cumulated with a proximity wide output.

OPTICS Whether it is due to the lens or reflector, every LED is constructed from the highest quality in optical materials in order to emit an even and homogenous light beam. Swivelling optical body: all BEAL headlamps feature an articulated optical body which allows the light beam to be swivelled as required.

swivelling optical body

optical

DEPENDING ON THE LAMP, BEAL USES TWO DISTINCT TECHNOLOGIES: 1 • CLASSIC POWER : Conventional unregulated electronic circuit where output decreases over time but with the advantage of long burn times. 2 • CONTINUOUS POWER : Regulated electronic circuits allow for multiple constant output levels to suit the user’s preference. Depending on the chosen mode, constant lighting is provided between 2 and several hours.

‘SPEED-SHIFT’ BATTERY REPLACEMENT On models that feature battery compartments at the rear of the head, batteries can easily be changed with one hand by using the spare waterproof container. A clever ejection and locking system ensures waterproofness.

LIGHTING

WATER RESISTANCE All of our headlamps are water resistant to at least the IPX6 standard, guaranteeing water resistance against a 100 l/min water jet from a 3 m distance.

57


LIGHTING Ref : BEL24.BK

Ref : BEL28.TB

Ref : BEL28.W

Ref : BEL24.TR

Ref : BEL24.W

Ref : BEL24.TG

L 24

L 28

With a surprising output of 24 lumens for its small size, this is the lightest in the ‘Light’ series. This ultra-light and compact headlamp has all the advantages of a larger variant: 2 independent light sources and 5 operation modes! • Source N° 1: A powerful LED with an exterior reflector for a focused and far reaching beam. - Maximum mode: for a focused and powerful light output up to 22 m of the ‘FOCUS’ variety. - Economical mode for the maximum burn time up to 72 hours. - Flashing mode allowing efficient signalling in case of an emergency. • Source N° 2: 2 red LEDs. - Constant mode for discreet night vision (reading, mountain huts,…). - Flashing mode to draw attention. Multiple fitting methods: - Directly to the head using the 2 easily detachable elasticated cords. - To a cap using the spring-loaded clamp. - To the rear of another headtorch’s elasticated head strap for effective rear signalling in the work yard, whether it is poorly lit or not lit at all.

Light (70 g), compact but most of all very comfortable to use. - 3 LEDs with built in reflector and lens. - Maximum mode for a reach of 27 m also gives excellent peripheral vision of the ‘FLOOD’ variety. - Medium mode for comfortable use and a good compromise between light output and energy consumption. - Economical mode for a maximum burn time. - Flashing mode to draw attention where needed. - A weight of 70 g. - The elastic head strap is easily removable and washable. The L24 can be attached to the rear. Exceptional water resistance: IPX6

- The two Lithium Ion batteries may be stored up to 10 years without deterioration. - Weight 29 g including batteries. Exceptional water resistance: IPX6 FLOOD

58

FOCUS

MAX

MAX

MEDIUM

ECO

ECO


LIGHTING Ref : BEBV.Y

VISIBILITY

360°

Be Visi A lighting concept that ensures you are seen in all conditions.

STRONG POINTS:

Two WHITE and FLASHING light sources, FRONT and REAR, to which reflective side straps are added to provide 360 degrees of high visibility during night-time interventions.

• Front and rear lighting provides 360 degrees of visibility. • A flashing beam ensures you are seen, a constant beam lights up the path ahead. • Two light sources: 1 at the front and 1 at the rear. • White light for fair weather visibility. • Red light for poor weather visibility, rain or fog. • Reflective strips give side on visibility. • Burn time: 115h in front flashing mode and 80h in rear flashing mode.

It consists of two light sources: a L28 head torch at the FRONT with an L24 head torch at the rear. It also features a reflective fluorescent band for additional visibility from the sides. The WHITE and RED lighting modes can be used to adapt to any weather conditions: white for fair weather and red for fog or drizzle. A FLASHING beam ensures you are seen whilst the CONSTANT beam lights up the path ahead.

LIGHTING

With its contemporary design, the Be Visi meets all your requirements thanks to its modular nature. The L24 is separate from the headband, meaning you can also attach it to a collar, sleeve, hem of a jacket, shorts pocket, bag or belt!

Sdis 73 © Vuedici.org / BEAL

59


LIGHTING Ref : BEFF120.TBK

Ref : BEL80.Y

Ref : BEL80.GY

L 80

FF 120

With 80 lumens and 5 lighting modes, the L80 sets the standard in headlamp versatility.

A headlamp with 2 light sources weighing only 96 g. The FF120 is a headlamp highly suited to all outdoor activities, from mountaineering to trail running. It offers the choice between long, focused lighting for moving quickly or a broad beam for close proximity use. • Source N° 1 - Focus: A powerful central LED with reflector for a long and bright beam. - Maximum mode: 100 lumens and a focused lighting distance up to 100 m. - Medium Mode provides 45 lumens of ‘CONTINUOUS POWER’ for comfortable use without a drop in output over a pre-defined period of time. - Economical mode for a maximum burn time. - Flashing mode to draw attention where needed. • Source N° 2 - Flood: 2 powerful lateral LEDs each backed by a reflector for peripheral lighting. - Maximum mode: for highly comfortable peripheral vision even when moving quickly. - Medium mode: for pleasant and homogenous close proximity vision, without areas of bright spots. - The elastic head strap is easily removable and washable, and compatible with the L24 attached to the rear. - Individual number.

• Source N° 1: - A powerful LED with additional reflector. - Maximum mode of 80 lumens with a range of 40m and a very wide spread, type FLOOD. - Medium mode for comfortable use and a good compromise between light output and energy consumption. - Economical mode for a maximum burn time. • Source N° 2: - 1 red LED. - Constant mode for discreet night vision (reading, mountain huts, ...). - Flashing mode for drawing attention. - A weight of 96 g. - The elasticated head strap can be easily removed and washed, and is compatible with the L24 attached to the rear. - Individual number. Exceptional water resistance: IPX 6

Exceptional water resistance: IPX6

FLOOD

FOCUS

MAX

MAX

MEDIUM

MEDIUM

ECO

ECO

FLOOD

LUMENS

= 96 g 60g

60

36 g

= 96 g 60g

36 g

6m


LIGHTING Ref : BEFF150.Y

Ref : BEFF150.BK

FF 150 The headlamp that provides close proximity lighting as well as a long distance lighting simultaneously. Its two buttons allow a second light source to be switched on and off independently whilst maintaining the first. Long and close proximity lighting, with the output spread between the two light sources. Lighting output remains constant for the battery’s duration by using ‘Continuous Power’ in the majority of settings. With 150 lumens in Total Power mode and up to a 60m throw for only 97 grams, the FF150 is the ideal head torch for all demanding outdoor activities, mountaineering or trail running. The settings are changed easily using two dedicated buttons; one controls the ‘Focus’ beam whereas the other controls the ‘Flood’ and ‘Red’ lights: • Source N° 1 - Focus: Powerful LED for focused long distance lighting when moving quickly - Medium mode: 50 lumens of Continous Power provides a comfortable amount of light without a loss in output. - Maximum mode: 110 lumens of Continous Power with a focused beam up to 60m. - Economical mode for a maximum burn time. • Source N° 2 - Flood: Powerful lateral LED for ultra-wide and homogenous lighting - Medium mode for comfortable and uniform close proximity lighting without bright spots. - Economical mode for ultra-close proximity lighting with a maximum burn time.

• Source N° 3: A constant red light setting for discrete lighting or efficient signalling in flashing mode. - Battery gauge - Individual number - Weight 95g - Easily detachable and washable headband is compatible with the L24 fitted at the back.

Exceptional water resistance: IPX6

Total Power: combines source N°1 and N°2’s maximum settings by pressing both buttons simultaneously.

FOCUS

TOTAL POWER

MAX

MEDIUM

ECO

97 g 61 g

36 g

LIGHTING

MAX

FLOOD

61


LIGHTING Ref : BEFF170.GY

Ref : BEFF190.BK

BATTERY GAUGE

FF 170

FF 190

A 170 lumen headlamp armed with 3 independent light sources aimed at the most extreme activities, from the fastest to the longest.

An ultra-powerful 190 lumens headlamp possessing a second equally powerful independent light source armed with an ultra large reflector for incredible peripheral lighting! The ultra large beam limits eye fatigue by providing a broad, constant light eliminating the darkness.

• Source N° 1 - Focus: A powerful LED with reflecting surround to provide a strong and long light beam. - Maximum mode: a very precise beam with a lighting distance up to 160 metres. - Medium mode: an excellent compromise between light level and energy consumption. - Economic mode: for maximum burn time. - Flashing mode to draw attention where needed. • Source N° 2 - Flood: 2 powerful lateral LEDs each backed by a reflector for bright and homogenous peripheral lighting. - Maximum mode with an output of 54 lumens for excellent peripheral vision. - Medium mode for clean and homogenous close proximity lighting. • Source N° 3: 2 red LEDs. - Constant mode for discreet night vision. - Flashing mode to draw attention or when in need. - Fitted using an elasticated band, optional removable 20mm band over the top of the head. - Ease of battery changes thanks to the “Speed-Shift” concept. - Individual number. Exceptional water resistance: IPX6

FOCUS

- Exceptional water resistance: IPX7 (30 minutes of submersion under 1m of water)

FOCUS

MAX

MAX

MEDIUM

MEDIUM

ECO

ECO

FLOOD

62

• Source N° 1 - Focus: A powerful central LED with reflector giving a very long lighting distance. - Maximum mode: for a highly focused beam up to 150 metres. - Medium mode: for an excellent compromise between light output and energy consumption. - Economic mode: for maximum burn time. - Flashing mode to efficiently draw attention when needed. • Source N° 2 - Flood: A powerful LED with a very large reflector for ultra-wide and powerful lighting. - Maximum mode with an output of 170 lumens with an ultra-wide beam up to 14,5 metres. - Medium mode for clean and uniform close proximity lighting. - Fitted using an elasticated band, optional removable 20mm band over the top of the head. - Ease of battery changes thanks to the “Speed-Shift” concept. - Individual number.

FLOOD

MAX

MAX

ECO

ECO


LIGHTING Ref : BEFF210R.R

ACCU 1800 Ref : BEAC1800

Ref : BEFF210R.BK

BATTERY GAUGE

FF 210 R A powerful rechargeable headtorch able to simultaneously provide both close proximity lighting as well as long distance lighting. Your eyes no longer constantly have to adjust from close proximity to long distance vision, the FF210 R does it for you. The chance of becoming dazzled and eye fatigue is therefore significantly reduced. In the field performance: - For a 3h burn time : 210 lumen output. - For a 5h burn time : 170 lumen output. - For a 7h burn time : 76 lumen output. - For a 9h burn time : 45 lumen output. Double vision –both near and far- is achieved through the activation of both lenses – the Flood and Focus beam- by means of independent buttons. With 210 lumens in Total Power mode (by pressing 2 buttons), a throw up to 74m and weighing only 103g, the FF210 R is the ideal headlamp for the most challenging environments. This headlamp can be recharged with USB or can be used with normal batteries. - Rechargeable 1800 mAh Lithium-Ion battery using micro USB. - REFLECTIVE elasticated headband for additional visibility. Easily detachable, washable and compatible with the L24 fitted at the back. - Charge indicator light. - Minimum 300 charge cycles. - 3 AAA batteries (not included) fitted in a container (included) can be used to replace the rechargeable battery. - Micro USB cable included. - Battery gauge. - Individual number. - 103g weight.

TOTAL POWER

Water resistance: IPX5

MAX

• Source N° 1 - Focus: Powerful LED for focused long distance lighting when moving quickly. - Medium mode: 76 lumens with a focused beam up to 45m. - Maximum mode: 170 lumens with a focused beam up to 70m. - Economical mode for a maximum burn time.

FLOOD

MAX -

MEDIUM

ECO

LIGHTING

• Source N° 2 - Flood: Powerful LED with a large beam for broad, uniform lighting - Medium setting: 45 lumens for comfortable and uniform close proximity lighting without bright spots. - Economical setting: 5 lumens for ultra close proximity lighting with amaximum burn time. Total Power: combines source N°1 and N°2’s maximum settings for a 210 lumen output by pressing both buttons simultaneously.

FOCUS

• Source N° 3: A constant red light setting for discrete lighting or efficient signalling in flashing mode.

63


LIGHTING

Ref : BELT170.G

Ref : BELT190.Y

LT 170

LT 190

An extremely compact lantern with 2 lighting functions – either torch or lantern.

A very stable lantern with 2 lighting functions – either torch or lantern. Wide and stable with an output of 190 lumens.

Torch position: - A powerful LED with additional reflector for a powerful and far reaching beam. - Maximum mode: 170 lumens and a focused lighting distance of up to 130 m. - Medium mode: for an excellent compromise between light output and energy consumption. - Economic mode: for maximum burn time. - Flashing mode: for efficient signalling when needed. Lantern position: - In this position a diffuser takes the place of the reflector and allows for 360° peripheral lighting. - This position equally provides maximum, medium and economic modes. - 3 retractable feet provide extra stability. - A hanging loop helps to suspends the lantern.

Torch position: - A powerful LED backed by a reflector for a bright and far reaching beam up to 150 m. Lantern position: - In this position a diffuser takes the place of the reflector and allows for powerful and homogenous 360° lighting. In the two positions you can choose your lighting mode from most economical to most powerful by a holding down the switch. - Two hooks helps to suspend the lantern.

- Water resistance: IPX4.

- Water resistance: IPX4.

FLASH LIGHT

MAX

FLASH LIGHT

LANTERN

MAX

MEDIUM

ECO

64

ECO

LANTERN


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.