EnsurePass 100-105 Exam Real Dumps Interconnecting Cisco Networking Devices Part 1 v3.0 (ICND1)

The Latest 100-105 Exam ☆ Instant Download ☆ Free Update for 180 Days

Vendor: Cisco Exam Code: 100-105 Exam Name: Interconnecting Cisco Networking Devices Part 1 v3.0 (ICND1) Version: 13.08 Q & As: 663

Guaranteed Success with EnsurePass VCE Software & PDF File

Why do you choose EnsurePass.com for your exam Preparation: 1. Real Exam Questions and Answers with PDF and VCE Files.

2. Free VCE Software 3. We do provide Personal Consulting Services.

4. Money Back Guarantee.

How to buy: 100-105 Exam Questions & Answers http://www.ensurepass.com/100-105.html

The Latest 100-105 Exam ☆ Instant Download ☆ Free Update for 180 Days

QUESTION 1 Refer to the exhibit. If host A sends an IP packet to host B, what will the source physical address be in the frame when it reaches host B?

A. B. C. D. E. F.

10.168.10.99 10.168.11.88 A1:A1:A1:A1:A1:A1 B2:B2:B2:B2:B2:B2 C3:C3:C3:C3:C3:C3 D4:D4:D4:D4:D4:D4

Correct Answer: E Explanation: When packets transfer from one host to another across a routed segment, the source IP address always remains the same source IP address, and the source physical (MAC) address will be the existing router's interface address. Similarly, the destination IP address always remains the same and the destination physical (MAC) address is the destination router's interface address.

QUESTION 2 Refer to the exhibit. What kind of cable should be used to make each connection that is identified by the numbers shown?

A. 1 - Ethernet Crossover cable 2 - Ethernet straight-through cable 3 - Fiber Optic cable Guaranteed Success with EnsurePass VCE Software & PDF File

The Latest 100-105 Exam ☆ Instant Download ☆ Free Update for 180 Days

4 - Rollover cable B. 1 - Ethernet straight-through cable 2 - Ethernet straight-through cable 3 - Serial cable 4 - Rollover cable C. 1 - Ethernet rollover cable 2 - Ethernet crossover cable 3 - Serial cable 4 - Null-modem cable D. 1 - Ethernet straight-through cable 2 - Ethernet Crossover cable 3 - Serial cable 4 - Rollover cable E. 1 - Ethernet straight-through cable 2 - Ethernet Crossover cable 3 - Serial cable 4 - Ethernet Straight-through cable Correct Answer: B Explanation: When connecting a PC to a switch, a standard Ethernet straight through cable should be used.

This same cable should also be used for switch to router connections. Generally speaking, crossover cables are only needed when connecting two like devices (PC-PC, switch-switch, router-router, etc).

Routers connect to frame relay and other WAN networks using serial cables. Rollover cables are special cables used for connecting to the console ports of Cisco devices.

QUESTION 3 Refer to the exhibit. What must be configured to establish a successful connection from Host A to switch SW-A through router RT-A?

A. B. C. D.

VLAN 1 on RT-A IP routing on SW-A default gateway on SW-A crossover cable connecting SW-A and RT-A

Correct Answer: C Explanation: In order for the switch to reach networks that are not local, such as networks attached to different interfaces of the router, it will need to set its default gateway to be the IP address of the attached router.

Guaranteed Success with EnsurePass VCE Software & PDF File

The Latest 100-105 Exam ☆ Instant Download ☆ Free Update for 180 Days

QUESTION 4 Refer to the exhibit. SwitchA receives the frame with the addressing shown in the exhibit.

According to the command output also shown in the exhibit, how will SwitchA handle this frame?

A. B. C. D. E.

It will drop the frame.

It will forward the frame out port Fa0/6 only.

It will forward the frame out port Fa0/3 only.

It will flood the frame out all ports.

It will flood the frame out all ports except Fa0/3.

Correct Answer: E Explanation: When frame receives the frame, it checks the source address on MAC table if MAC address found in MAC table it tries to forward if not in MAC table adds the Address on MAC table. After checking the source address, it checks the destination address on MAC table, if MAC address found on MAC table it forwards to proper ports otherwise floods on all ports except the source port.

QUESTION 5 Refer to the topology and switching table shown in the graphic. Host B sends a frame to Host C. What will the switch do with the frame?

Guaranteed Success with EnsurePass VCE Software & PDF File

The Latest 100-105 Exam ☆ Instant Download ☆ Free Update for 180 Days

A. B. C. D. E. F.

Drop the frame Send the frame out all ports except port 0/2 Return the frame to Host B Send an ARP request for Host C Send an ICMP Host Unreachable message to Host B Record the destination MAC address in the switching table and send the frame directly to Host C

Correct Answer: B

QUESTION 6 Which network device functions only at Layer 1 of the OSI model?

A. B. C. D. E.

Option A Option B Option C Option D Option E Guaranteed Success with EnsurePass VCE Software & PDF File

The Latest 100-105 Exam ☆ Instant Download ☆ Free Update for 180 Days

Correct Answer: B Explanation: Most hubs are amplifying the electrical signal; therefore, they are really repeaters with several ports. Hubs and repeaters are Layer 1 (physical layer) devices.

QUESTION 7 Which statements accurately describe CDP? (Choose three.)

A. B. C. D. E. F.

CDP is an IEEE standard protocol.

CDP is a Cisco proprietary protocol.

CDP is a datalink layer protocol.

CDP is a network layer protocol.

CDP can discover directly connected neighboring Cisco devices.

CDP can discover Cisco devices that are not directly connected.

Correct Answer: BCE Explanation: CDP (Cisco Discovery Protocol) is a proprietary protocol designed by Cisco to help administrators collect information about both locally attached and remote devices. By using CDP, you can gather hardware and protocol information about neighbor devices containing useful info for troubleshooting and documenting the network.

QUESTION 8 At which layer of the OSI model does the protocol that provides the information that is displayed by the show cdp neighbors command operate?

A. B. C. D. E.

application transport network physical data link

Correct Answer: E Explanation: CDP is a device discovery protocol that runs over Layer 2 (the data link layer) on all Ciscomanufactured devices (routers, bridges, access servers, and switches) and allows network management applications to discover Cisco devices that are neighbors of already known devices.

With CDP, network management applications can learn the device type and the Simple Network Management Protocol (SNMP) agent address of neighboring devices running lower-layer, transparent protocols.

CDP allows devices to share basic configuration information without even configuring any protocol specific information and is enabled by default on all interfaces. CDP is a Datalink Protocol occurring at Layer 2 of the OSI model. CDP is not routable and can only go over to directly connected devices. CDP is enabled, by default, on all Cisco devices. CDP updates are generated as multicasts every 60 seconds with a hold-down period of 180 seconds for a missing neighbor. The no cdp run command globally disables CDP, while the no cdp enable command disables CDP on an interface. Use show cdp neighbors to list out your directly connected Cisco neighboring devices. Adding the detail parameter will display the layer-3 addressing configured on the neighbor.

Reference: http://computernetworkingnotes.com/cisco-devices-administration-andconfiguration/cisco-discoveryprotocol.html

Guaranteed Success with EnsurePass VCE Software & PDF File

The Latest 100-105 Exam ☆ Instant Download ☆ Free Update for 180 Days

QUESTION 9 Which statements are true regarding ICMP packets? (Choose two.)

A. B. C. D. E.

They acknowledge receipt of TCP segments.

They guarantee datagram delivery.

TRACERT uses ICMP packets.

They are encapsulated within IP datagrams.

They are encapsulated within UDP datagrams.

Correct Answer: CD Explanation: Ping may be used to find out whether the local machines are connected to the network or whether a remote site is reachable. This tool is a common network tool for determining the network connectivity, which uses ICMP protocol instead of TCP/IP and UDP/IP. This protocol is usually associated with the network management tools, which provide network information to network administrators, such as ping and traceroute (the later also uses the UDP/IP protocol).

ICMP is quite different from the TCP/IP and UDP/IP protocols. No source and destination ports are included in its packets. Therefore, usual packet-filtering rules for TCP/IP and UDP/IP are not applicable. Fortunately, a special "signature" known as the packet's Message type is included for denoting the purposes of the ICMP packet. Most commonly used message types are namely, 0, 3, 4, 5, 8, 11, and 12 which represent echo reply, destination unreachable, source quench, redirect, echo request, time exceeded, and parameter problem respectively.

In the ping service, after receiving the ICMP "echo request" packet from the source location, the destination

QUESTION 10 Refer to the exhibit. Host A is sending a packet to Host B for the first time. What destination MAC address will Host A use in the ARP request?

A. B. C. D. E. F.

192.168.0.1 172.16.0.50 00-17-94-61-18-b0 00-19-d3-2d-c3-b2 ff-ff-ff-ff-ff-ff 255.255.255.255

Correct Answer: E Explanation: For the initial communication, Host A will send a broadcast ARP (all F's) to determine the correct Guaranteed Success with EnsurePass VCE Software & PDF File

The Latest 100-105 Exam ☆ Instant Download ☆ Free Update for 180 Days

address to use to reach the destination.

ARP sends an Ethernet frame called an ARP request to every host on the shared link-layer legmen. The Ethernet header includes the source host MAC address and a destination address of all Fs representing a broadcast frame. The ARP request contains the sender's MAC and IP address and the target (destination) IP address. The target's MAC address is set to all 0s.

ARP Request Reference: http://www.technicalhowto.com/protocols/arp/arp.html

QUESTION 11 Refer to the exhibit. HostX is transferring a file to the FTP server. Point A represents the frame as it goes toward the Toronto router. What will the Layer 2 destination address be at this point?

A. B. C. D. E.

abcd.1123.0045 192.168.7.17 aabb.5555.2222 192.168.1.1 abcd.2246.0035

Correct Answer: E Explanation: For packets destined to a host on another IP network, the destination MAC address will be the LAN interface of the router. Since the FTP server lies on a different network, the host will know to send the frame to its default gateway, which is Toronto.

QUESTION 12 Which two statements describe the operation of the CSMA/CD access method? (Choose two.)

A. In a CSMA/CD collision domain, multiple stations can successfully transmit data simultaneously.

B. In a CSMA/CD collision domain, stations must wait until the media is not in use before transmitting.

C. The use of hubs to enlarge the size of collision domains is one way to improve the operation of the CSMA/CD access method.

D. After a collision, the station that detected the collision has first priority to resend the lost data.

E. After a collision, all stations run a random backoff algorithm. When the backoff delay period has Guaranteed Success with EnsurePass VCE Software & PDF File

The Latest 100-105 Exam ☆ Instant Download ☆ Free Update for 180 Days

expired, all stations have equal priority to transmit data.

F. After a collision, all stations involved run an identical backoff algorithm and then synchronize with each other prior to transmitting data.

Correct Answer: BE Explanation: Ethernet networking uses Carrier Sense Multiple Access with Collision Detect (CSMA/CD), a protocol that helps devices share the bandwidth evenly without having two devices transmit at the same time on the network medium. CSMA/CD was created to overcome the problem of those collisions that occur when packets are transmitted simultaneously from different nodes. And trust me, good collision management is crucial, because when a node transmits in a CSMA/CD network, all the other nodes on the network receive and examine that transmission. Only bridges and routers can effectively prevent a transmission from propagating throughout the entire network! So, how does the CSMA/CD protocol work? Like this: when a host wants to transmit over the network, it first checks for the presence of a digital signal on the wire. If all is clear (no other host is transmitting), the host will then proceed with its transmission. But it doesn't stop there. The transmitting host constantly monitors the wire to make sure no other hosts begin transmitting. If the host detects another signal on the wire, it sends out an extended jam signal that causes all nodes on the segment to stop sending data (think, busy signal). The nodes respond to that jam signal by waiting a while before attempting to transmit again. Backoff algorithms determine when the colliding stations can retransmit. If collisions keep occurring after 15 tries, the nodes attempting to transmit will then time out.

QUESTION 13 On a Cisco switch, which protocol determines if an attached VoIP phone is from Cisco or from another vendor?

A. B. C. D.

RTP TCP CDP UDP

Correct Answer: C Explanation: The Cisco Unified IP Phone uses CDP to communicate information such as auxiliary VLAN ID, per port power management details, and Quality of Service (QoS) configuration information with the Cisco Catalyst switch.

Cisco Discovery Protocol (CDP) is a proprietary protocol designed by Cisco to help administrators collect information about both locally attached and remote devices. By using CDP, you can gather hardware and protocol information about neighbor devices, which is useful info for troubleshooting the network.

CDP messages are generated every 60 seconds as multicast messages on each of its active interfaces.

The information shared in a CDP packet about a Cisco device includes the following: Name of the device configured with the hostname command IOS software version Hardware capabilities, such as routing, switching, and/or bridging Hardware platform, such as 2600, 2950, or 1900 The layer-3 address(es) of the device The interface the CDP update was generated on Reference: http://computernetworkingnotes.com/cisco-devices-administration-andconfiguration/cisco-discoveryprotocol.html

Guaranteed Success with EnsurePass VCE Software & PDF File

The Latest 100-105 Exam ☆ Instant Download ☆ Free Update for 180 Days

QUESTION 14 Refer to the exhibit. A network device needs to be installed in the place of the icon labeled Network Device to accommodate a leased line attachment to the Internet. Which network device and interface configuration meets the minimum requirements for this installation?

A. B. C. D. E.

a router with two Ethernet interfaces a switch with two Ethernet interfaces a router with one Ethernet and one serial interface a switch with one Ethernet and one serial interface a router with one Ethernet and one modem interface

Correct Answer: C Explanation: Only a router can terminate a leased line attachment access circuit, and only a router can connect two different IP networks. Here, we will need a router with two interfaces, one serial connection for the line attachment and one Ethernet interface to connect to the switch on the LAN.

QUESTION 15 To what type of port would a cable with a DB-60 connector attach?

A. B. C. D.

Serial port Console port Ethernet port Fibre optic port

Correct Answer: A Explanation: Serial Connection

cl_3_dte_male

Guaranteed Success with EnsurePass VCE Software & PDF File

The Latest 100-105 Exam ☆ Instant Download ☆ Free Update for 180 Days

cl_2_dce The picture on the left shows a V.35 DTE cable with a male DB60 connector and a male standard 34-pin Winchester-type connector. The right picture shows a V.35 DCE serial cable with a male DB60 connector and a female 34-pin Winchester-type connector. As you probably guessed already, the male connector of the DTE cable is attached to the DCE cable's female connector, this is depicted in the picture below. This is known as a back-to- back connection, and 'simulates' a WAN link. In a real world setup, the DTE cable's male connector typically connects to a port on a CSU/DSU provided by a service provider (i.e. telco), which in turn connects to a CSU/DSU at another location, thru a T1 link for example.

The DB60 connector connects to a Serial interface on a router.

cl_4_malefemale Reference: http://www.techexams.net/techlabs/ccna/lab_hardware.shtml

QUESTION 16 Refer to the exhibit. The output is from a router in a large enterprise. From the output, determine the role of the router.

Guaranteed Success with EnsurePass VCE Software & PDF File

EnsurePass.com Members Features: 1.

2.

3.

4.

5.

Verified Answers researched by industry experts.

Q&As are downloadable in PDF and VCE format.

98% success Guarantee and Money Back Guarantee.

Free updates for 180 Days.

Instant Access to download the Items

View list of All Exam provided: http://www.ensurepass.com/certfications?index=A To purchase Lifetime Full Access Membership click here: http://www.ensurepass.com/user/register

Valid Discount Code 20% OFF for 2019: MMJ4-IGD8-X3QW To purchase the HOT Exams: Vendors Cisco Cisco Cisco Cisco Cisco Cisco Cisco Cisco Cisco Cisco CompTIA CompTIA CompTIA CompTIA CompTIA CompTIA CompTIA CompTIA CompTIA CompTIA CompTIA Microsoft Microsoft Microsoft Microsoft Microsoft Microsoft Microsoft Microsoft ISC

Hot Exams 100-105 200-105 200-125 200-310 200-355 300-101 300-115 300-135 300-320 400-101 220-1001 220-1002 220-901 220-902 CAS-003 LX0-103 LX0-104 N10-007 PK0-004 SK0-004 SY0-501 70-410 70-411 70-412 70-740 70-741 70-742 70-761 70-762 CISSP

Download http://www.ensurepass.com/100-105.html http://www.ensurepass.com/200-105.html http://www.ensurepass.com/200-125.html http://www.ensurepass.com/200-310.html http://www.ensurepass.com/200-355.html http://www.ensurepass.com/300-101.html http://www.ensurepass.com/300-115.html http://www.ensurepass.com/300-135.html http://www.ensurepass.com/300-320.html http://www.ensurepass.com/400-101.html http://www.ensurepass.com/220-1001.html http://www.ensurepass.com/220-1002.html http://www.ensurepass.com/220-901.html http://www.ensurepass.com/220-902.html http://www.ensurepass.com/CAS-003.html http://www.ensurepass.com/LX0-103.html http://www.ensurepass.com/LX0-104.html http://www.ensurepass.com/N10-007.html http://www.ensurepass.com/PK0-004.html http://www.ensurepass.com/SK0-004.html http://www.ensurepass.com/SY0-501.html http://www.ensurepass.com/70-410.html http://www.ensurepass.com/70-411.html http://www.ensurepass.com/70-412.html http://www.ensurepass.com/70-740.html http://www.ensurepass.com/70-741.html http://www.ensurepass.com/70-742.html http://www.ensurepass.com/70-761.html http://www.ensurepass.com/70-762.html http://www.ensurepass.com/CISSP.html

Cisco Exam Dumps CCDA

CCIE Security

200-310

300-101

300-701

400-251

CCDE

CCIE Service Provider

352-001

300-501 400-201

CCDP

CCIE Wireless

300-115

300-320

400-351

CCENT

CCNA

100-105

200-301

CCIE Collaboration

CCNA Cloud

300-801

400-051

CCIE Data Center 300-601

400-151

CCIE Enterprise Infrastructure 300-401

CCIE Enterprise Wireless 300-401

210-451

210-455

CCNA Collaboration 210-060

210-065

CCNA Cyber Ops 210-250

210-255

CCNA Data Center 200-150

200-155

CCIE Routing and Switching

CCNA Industrial

400-101

200-601

CCNA Routing & Switching 100-105

200-105

CCNP Routing & Switching 300-101 300-115

200-125

300-135

CCNA Security

CCT Data Center

210-260

010-151

CCNA Service Provider

CCT Routing & Switching

640-875

640-878

640-692

CCNA Wireless

Cisco Certified DevNet Associate

200-355

200-901

CCNP Cloud

Cisco Network Programmability Design and

300-460

300-465

Implementation Specialist

300-470

300-475

300-550

CCNP Collaboration

CCNP Enterprise

300-070 300-075

300-080

300-401

300-410

300-415

300-085 300-801

300-810

300-420

300-425

300-430

300-815 300-820

300-835

CCNP Data Center

300-435

CCNP Security

300-160 300-165

300-170

300-206

300-208

300-209

300-175 300-180

300-601

300-210

300-701

300-710

300-610 300-615

300-620

300-715

300-720

300-725

300-625

300-635

300-730 300-735

CCNP Service Provider 300-501 300-510

300-515

642-883 642-885

642-887

642-889

300-535

CCNP Wireless 300-360

300-365

300-370

300-375

Cisco Certified DevNet Professional 300-435 300-535

300-635

300-735 300-835

300-901

300-910 300-915

300-920

Cisco Certified DevNet Specialist 300-435 300-535

300-635

300-735

300-835

300-901

300-910 300-915

300-920

Cisco Network Programmability Developer Specialist 300-560

Role-based Exams Dumps Azure Security Engineer Associate

Microsoft 365 Certified Fundamentals

AZ-500

MS-900

Dynamics 365 Fundamentals

Messaging Administrator Associate

MB-900

Dynamics 365 for Marketing Functional Consultant Associate MB-200

MS-200

MS-201

MS-202

Modern Desktop Administrator Associate MD-100

MD-101

MB-220

Dynamics 365 for Field Ser vice Functional

Security Administrator Associate

Consultant Associate

MS-500

MB-200

MB-240

Dynamics 365 for Finance and Operations, Financials Functional Consultant Associate MB-300

Teamwork Administrator Associate MS-300

MS-301

MS-302

MB-310

Dynamics 365 for Finance and Operations,

Azure Administrator Associate

Manufacturing Functional Consultant

AZ-103

Associate MB-300

MB-320

Dynamics 365 for Finance and Operations,

Azure AI Engineer Associate

Supply Chain Management Functional

AI-100

Consultant Associate MB-300

MB-330

Azure Data Engineer Associate DP-200

DP-201

Azure Data Scientist Associate DP-100

Microsoft Certified Azure Fundamentals AZ-900

Azure Solutions Architect Expert AZ-300

AZ-301

Azure Developer Associate

Dynamics 365 for Customer Ser vice

AZ-203

Functional Consultant Associate MB-200

MB-230

Azure DevOps Engineer Expert

Dynamics 365 for Sales Functional Consultant

AZ-400

Associate MB-200

MB-210

MCSA Exams Dumps

BI Reporting

SQL Ser ver 2012/2014

70-778

70-461

70-779

70-462 70-463

Microsoft Dynamics 365 for Operations

Universal Windows Platform

70-764

70-483

70-765

70-357

MB6-894

SQL 2016 BI Development

Web Applications

70-767

70-480

70-768

70-483 70-486

SQL 2016 Database Administration

Windows Ser ver 2012

70-764

70-410

70-765

70-411 70-412

SQL 2016 Database Development

Windows Ser ver 2016

70-761

70-740

70-762

70-741 70-742

MCSE Exams Dumps

Business Applications

Data Management and Analytics

MB2-716

70-464

MB2-718

70-465

MB2-719

70-466

MB6-895

70-467

MB6-896

70-762

MB6-897

70-767

MB6-898

70-768 70-777

Core Infrastructure

MCSE Productivity Solutions Expert

70-744

70-345

70-745

70-339

70-413

70-333

70-414

70-334

70-537

MCSD Exams Dumps

70-357

70-486

70-487

MTA Exams Dumps

Exam 98-349

Exam 98-369

Exam 98-361

Exam 98-375

Exam 98-364

Exam 98-380

Exam 98-365

Exam 98-381

Exam 98-366

Exam 98-382

Exam 98-367

Exam 98-383

Exam 98-368

Exam 98-388

CompTIA Exam Dumps CompTIA A+ 2019

220-1001

CompTIA A+ 2019

220-1002

CompTIA A+ 2019

220-901

CompTIA A+ 2019

220-902

CompTIA Advanced Security Practitioner

CAS-003

CompTIA Cloud Essentials

CLO-001

CompTIA Cloud Essentials

CLO-002

CompTIA CySA+

CS0-001

CompTIA Cloud+

CV0-002

CompTIA IT Fundamentals

FC0-U51

CompTIA IT Fundamentals

FC0-U61

CompTIA Linux+

LX0-103

CompTIA Linux+

LX0-104

CompTIA Network+

N10-007

CompTIA Project+

PK0-004

CompTIA PenTest+

PT0-001

CompTIA Security+

SY0-501

CompTIA CTT+

TK0-201

CompTIA CTT+

TK0-202

CompTIA CTT+

TK0-203

CompTIA Linux+

XK0-004