Supported SFP and SFP+ modules for Cisco Catalyst 2960-X Series Switches 2017.8.10 Cisco Catalyst 2960-X series switches are fixed-configuration and stackable gigabit ethernet layer 2 and layer 3 access switches, and include configurations to fit in any enterprise network. Here I will mainly introduce the knowledge of 2960-X series switches and compatible SFP modules for it.
Cisco Catalyst 2960-X Series Switches Datasheet
Cisco Catalyst 2960-X switches feature:
● 24 or 48 Gigabit Ethernet ports with line-rate forwarding performance
● Gigabit Small Form-Factor Pluggable (SFP) or 10G SFP+ uplinks
● FlexStack Plus for stacking of up to 8 switches with 80 Gbps of stack throughput (optional)
● Power over Ethernet Plus (PoE+) support with up to 740W of PoE budget
● 24-port PoE fanless switch for deployment outside the wiring closet
● Reduced power consumption and advanced energy management features
● USB and Ethernet management interfaces for simplified operations
● Application visibility and capacity planning with integrated Full (Flexiable) NetFlow and NetFlow-Lite
● LAN Base or LAN Lite Cisco IOS software features
● Enhanced limited lifetime warranty (E-LLW) offering next-business-day hardware replacement
● Identify, classify and control of trusted internal network traffic through Domain Name System as an Authoritative Source (DNSAS)
The table below summarizes Cisco 2960X Series Switches and model numbers, with details such as Ethernet ports, uplinks, Power over Ethernet (PoE), and FlexStack stacking.
10/100/1000 Ethernet Model
FlexStack Uplinks
Feature Set
PoE+ Power
Ports
Plus Stacking
WS-C2960X-48FPD-L
48
2 SFP+
LAN Base
740W
Optional
WS-C2960X-48LPD-L
48
2 SFP+
LAN Base
370W
Optional
WS-C2960X-24PD-L
24
2 SFP+
LAN Base
370W
Optional
WS-C2960X-48TD-L
48
2 SFP+
LAN Base
-
Optional
WS-C2960X-24TD-L
24
2 SFP+
LAN Base
-
Optional
WS-C2960X-48FPS-L
48
4 SFP
LAN Base
740W
Optional
WS-C2960X-48LPS-L
48
4 SFP
LAN Base
370W
Optional
WS-C2960X-24PS-L
24
4 SFP
LAN Base
370W
Optional
WS-C2960X-48TS-L
48
4 SFP
LAN Base
-
Optional
WS-C2960X-24TS-L
24
4 SFP
LAN Base
-
Optional
LAN Base
92W (8 ports)
No
2 SFP and 2 WS-C2960X-24PSQ-L
24 1000BASE-T
WS-C2960X-48TS-LL
48
2 SFP
LAN Lite
-
No
WS-C2960X-24TS-LL
24
2 SFP
LAN Lite
-
No
Related Source: Cisco Catalyst 2960-X Series Switches Data Sheet
Supported SFP and SFP+ modules for Cisco Catalyst 2960-X Series Switches
By consulting the Cisco Transceiver Modules Compatibility Matrix, I get following supported SFP models for 2960-X series switches.
Cisco Gigabit Ethernet Transceiver Modules for Cisco 2960-X Series Switches
Minimum Software Release Required Network Device
Transceiver Model DOM Support
Software Release
15.0(2)EX
15.0(2)EX
15.0(2)EX
15.0(2)EX
15.0(2)EX
15.0(2)EX
GLC-LH-SMD GLC-SX-MMD GLC-EX-SMD WS-C2960X-24TS-LL
GLC-T
WS-C2960X-48TS-LL
GLC-TE GLC-LH-SM GLC-SX-MM GLC-GE-100FX
GLC-BX-D GLC-BX-U GLC-LH-SMD GLC-SX-MMD GLC-EX-SMD WS-C2960X-24PSQ-L
GLC-ZX-SMD GLC-T GLC-TE GLC-ZX-SM GLC-LH-SM GLC-SX-MM
WS-C2960X-24PS-L
GLC-BX-D
WS-C2960X-24TS-L
GLC-BX-U
WS-C2960X-48TS-L
GLC-LH-SMD
WS-C2960X-48LPS-L
GLC-SX-MMD
WS-C2960X-48FPS-L
GLC-EX-SMD
WS-C2960X-24TD-L
GLC-ZX-SMD
WS-C2960X-24PD-L
GLC-T
WS-C2960X-48TD-L
GLC-TE
WS-C2960X-48LPD-L
GLC-ZX-SM
Cisco Gigabit Ethernet Transceiver Modules for Cisco 2960-X Series Switches
Minimum Software Release Required Network Device
Transceiver Model DOM Support
WS-C2960X-48FPD-L
Software Release
GLC-LH-SM GLC-SX-MM CWDM-SFP GLC-GE-100FX
Cisco 10-Gigabit Ethernet Transceiver Modules for Cisco 2960-X Series Switches
Minimum Software Release Required Network Device
Transceiver Model DOM Support
Software Release
15.0(2)EX
15.0(2)EX
15.2(2)E3
15.2(2)E3
—
15.2(2)E
SFP-10G-LR SFP-10G-SR SFP-10G-LRM SFP-10G-ER SFP-10G-SR-S SFP-10G-LR-S SFP-10G-ER-S WS-C2960X-24TD-L WS-C2960X-24PD-L WS-C2960X-48TD-L
SFP-H10GB-CU1M SFP-H10GB-CU3M SFP-H10GB-CU5M
WS-C2960X-48LPD-L WS-C2960X-48FPD-L
SFP-10G-ZR SFP-10G-ZR-S DWDM SFP+
SFP-H10GB-CU1-5M SFP-H10GB-CU2M SFP-H10GB-CU2-5M SFP-H10GB-ACU7M
Cisco 10-Gigabit Ethernet Transceiver Modules for Cisco 2960-X Series Switches
Minimum Software Release Required Network Device
Transceiver Model DOM Support
Software Release
SFP-H10GB-ACU10M SFP-10G-AOC1M SFP-10G-AOC2M SFP-10G-AOC3M SFP-10G-AOC5M SFP-10G-AOC7M SFP-10G-AOC10M Related Source: Cisco Transceiver Modules Compatibility Information
Frequently asked questions about Cisco 2960X
Q. What are the notable differences between the Cisco Catalyst 2960-X and 2960-XR switches? A. The Cisco Catalyst 2960-XR switch models have the following additional capabilities in addition to the features in the 2960-X models: ●
Dual-FRU power supply with integrated fan
●
Layer 3 features with IP Lite feature set
●
Configurable 8 queues per port (standalone)
●
48 Ether channel groups
Q. What are the notable hardware differences between the LAN Base and LAN Lite switches in 2960-X switches? A. The Cisco Catalyst 2960-X switches support LAN Base and LAN Lite software feature sets. Following are the notable hardware components present only in LAN Base switches: ●
Ease of management with Cisco FlexStack-Plus
●
Power over Ethernet/Power over Ethernet Plus (PoE/PoE+) capabilities
●
Small Form-Factor Pluggable Plus (SFP+) support
Q. Do I need a software license for the Cisco Catalyst 2960-X Series Switches? A. No. Cisco Catalyst 2960-X Series Switches use the Universal image, but no license is required. The feature set is bound to the hardware model type and cannot be changed.
Q. Can LAN Base and IP Lite feature set models stack together in the Cisco Catalyst 2960-X Series? A. No, LAN Base and IP Lite feature set models cannot be stacked together. LAN Base feature set models can stack with LAN Base feature set models only. Similarly, IP Lite feature set models can stack with IP Lite feature set models only.
Q. What is the difference between the Cisco IOS Software feature sets? A. The differences between the three Cisco IOS Software feature sets are: ●
LAN Lite feature set has entry-level Layer 2 features and is targeted at midmarket deployments.
●
LAN Base feature set comes with advanced Layer 2 features and is typically targeted at enterprise customers.
●
IP Lite feature set comes with enterprise access Layer 3 features and is typically targeted at enterprise customers.
Related Source: Cisco Catalyst 2960-X Series FAQ
Original posted at http://ciscodatasheet.blogspot.com/2017/08/supported-sfp-modules-for-cisco-2960-x.html