CONNECTING DVD/VCR/TV TUNER TO WORK WITH WALL CONTROLLER
1) What you should find in the box: DVD/VCR/TV Tuner Coaxial Cable Audio/Video Cable Batteries for remote Remote Control
2) Plug the DVD/VCR/TV tuner into a working power outlet. Connect one end of the Audio/Video cable (White, Yellow, and Red pigtail cable) into the Digital Classroom wall plate. Plug the coaxial cable into the coaxial plate connector. Coaxial Cable
Audio/Video Cable 3) On the back of the DVD/VCR/TV tuner plug the other end of the Audio/Video cable into the appropriate video, left and right audio output ports. The ports should be color coded just like the cable. Coaxial Cable UHF/VHF In Audio/Video cable Output ports
4) Plug the other end of the coaxial cable into the UHF/VHF In connector on the back of the DVD/VCR/TV tuner unit. Twist the end of the coaxial cable to tighten. Make sure this is done or you may not get a picture or the picture may be fuzzy. 5) Place the DVD/VCR/TV tuner on the provided shelf or designated location in your room.
6) Use remote to power the DVD/VCR/TV tuner on.