Ri2016 product range construction en by Rudolf Group

www.rudolf.construction

CONSTRUCTION CHEMICALS

Product Range 2016

Product Range Construction Chemicals Additives for paste-like masonry coatings

Match-Codes

RUCOSIL

B-TF, B-TF 60

RUCOSIL

B-MS

RUCOSIL

B-HA, B-LS, B-LF, B-OZ

RUCOSIL

B-WX

RUCOSIL

B-SL, B-MK

Silicone Resin Binders

Silicone Resin high-temperature resistant

Silicone Hydrophobizing Additives

Wax Emulsion

Defoamer

Silicone Impregnating Agents

Match-Codes

RUCOSAN

B-SR 100, B-SB 100

RUCOSAN

B-WB

RUCOSAN

B-SK

RUCOSAN

B-CM 80, B-CM 40

RUCOSAN

B-GO

Impregnation solvent-based

Impregnation water-based

Microemulsion Concentrate

Impregnating Creams

Anti-graffiti Coatings

Fluorocarbon Impregnating Agents

Match-Codes

RUCOTEC

B-FL 6, B-FO 6, B-FI 6

RUCOTEC

B-FW 6, B-FA 6, B-FN 6

RUCOTEC

B-FS 6, B-FS solv.

RUCOTEC

B-CM FL

Impregnation solvent-based

Impregnation water-based

Fluoro-Silicone Impregnations

Fluoro-Silicone-Impregnation-Cream

Powdery Additives

Match-Codes

Silicone Hydrophobizing Powder

RUCOMIN

B-PW

Powder Defoamer

RUCOMIN

B-PM

Additives for paste-like masonry coatings

Produkt

RUCOSIL

速

Match-Code

RUCOSIL

速

B-TF

B-TF 60

B-MS

Silicone Resin Binder

Silicone Resin Binder high-temperature resistant

Application

Co-binder in silicone resin emulsion

paints and plaster

paints and plaster and in high-temperature resistant coatings

Characteristics

excellent water repellency

high-temperature resistant

high water vapour permeability

excellent water repellency

high early water resistance

high water vapour permeability

low soiling tendency

high early water resistance

film forming

low soiling tendency

solvent free

film forming

also effective with very low

solvent free

addition level

resistant to alkali

Addition level and

Silicone resin paint: 2 - 10 %

Silicone resin paint: 2 - 8 %

Silicone resin paint: 4 - 10 %

application

Silicone resin plaster: 2 - 6 %

Silicone resin plaster: 2 - 5 %

Silicone resin plaster: 2 - 6 %

SiSi-plaster: 2 - 4 %

SiSi-plaster: 2 - 3 %

(calculated on total formulation)

Chemical

Emulsion of a modified polysiloxane

Emulsion of a methyl silicone resin

description

resin

Approx. 50 %

Approx. 60 %

Approx. 50 %

Solvent

Water

Appearance

Milky, white, liquid

Active substance

- 息 RUDOLF GROUP - Product Range Construction Chemicals - 2016-01-14 - Page 2 -

Additives for paste-like masonry coatings

Produkt

RUCOSIL

Match-Code

Application

RUCOSIL

B-HA

B-LS

B-LF

Silicone-Hydrophobizing-

Fluorocarbon resin

Additive

Hydrophobizing additive for water

“Beading booster“ for strongly

based masonry coatings for

and solvent based masonry

water-beading Lotus paints and

example

coatings for example

plaster in combination with silicone

silicone resin paints and plaster,

water hydrophobizing additives,

acrylic paints and plaster,

such as RUCOSIL B-HA or B-LS

silicate paints and plaster

silicate paints and plaster, paints and plaster with a strong beading effect

Characteristics

excellent water repellence

water-repellent

does not influence permeability to

no influence on the water vapour

water vapor

permeability

high early water resistance

creates a beading effect

creates a strong beading effect

creates a very strong beading effect

solvent free

solvent-free low tendency to soil

Addition level and

Silicone resin paint/plaster:

beading paint:

application

0.5-1.5 %

0.5 - 1.5 % RUCOSIL B-LF;

Acrylic paint/plaster: 1 - 3 %

1.0 - 3.0 % RUCOSIL B-HA or

Silicate paint/plaster: 1 - 3 %

0.5 - 2.0 % RUCOSIL B-LS

Beading paint/plaster: 3 - 5 %

beading plaster: 0.5 - 1.5 % RUCOSIL B-LF;

(calculated on total formulation)

1.0 - 3.0 % RUCOSIL B-HA or 0.5 - 2.0 % RUCOSIL B-LS (calculated on total formulation)

Chemical

Emulsion of a functional

description

polysiloxane

Functional polysiloxane

Aqueous fluorocarbon polymer

Approx. 50 %

Approx. 100 %

Approx. 25 %

Solvent

Water

Solvent free

Water

Appearance

Milky, white, liquid

Clear, liquid

Milky, yellowish, liquid

Active substance

Additives for paste-like masonry coatings

Produkt

RUCOSIL

Match-Code

Application

RUCOSIL

B-OZ

B-WX

Silicone-Additive

Wax-Emulsion

Solvent-free additive for aqueous

Hydrophobizing additive for water

construction coating systems for the

based masonry coatings, mainly

interior, particularly interior paints.

acrylic plaster;

It improves processing as well as

also used as exsiccation barrier

wetting and flow properties. The hydrophobic character of the first coat prolongs the open time for the second coat Characteristics

prolongs the open time

water repellent

longer, invisible re-touch possible

no influence on the water vapour

increases the hydrophobic proper-

permeability

ties of the first coat

high early water resistance

easier application of the second

prevents a too strong water

coat

absorption of the subsequent coating solvent free

Addition level and

Interior Paint: 1.0 - 3.0 %

application

Acrylic plaster: 0.5 - 1.5 % Exsiccation barrier: 0.5 - 1.5 %

(calculated on total formulation)

Chemical

Emulsion of a functional

Emulsion of paraffins

description

polysiloxane

Active

Approx. 34%

Approx. 40 %

Solvent

Water

Appearance

Clear, yellowish, liquid

Milky, white, liquid

substance

Additives for paste-like masonry coatings

Produkt

RUCOSIL

Match-Code

Application

Characteristics

RUCOSIL

B-SL

B-MK

Defoamer

Defoamer for water based

coatings, for example masonry

paints and plaster, industrial and

wood coatings, printing inks

highly effective

well dispersible

well dispersible silicone free

Addition level and

0.1 - 0.5 %

(calculated on total formulation)

The defoamer is typically added

undiluted at the beginning of pro-

duction

Chemical

Blend of polysiloxanes and emulsi-

Blend of liquid hydrocarbons,

description

fiers

hydrophobic silica and emulsifiers

Approx. 28 %

Approx. 100 %

Solvent

Water

Solvent free

Appearance

Milky, white, liquid

Brownish, turbid

application

Active substance

Silicone Impregnating Agents

Produkt

RUCOSAN

Match-Code

Application

RUCOSAN

B-SR 100

B-SB 100

Silicone Impregnating Agent

Masonry water repellent for the

formulation of solvent based im-

pregnations and primers for mineral

substrates

substrates; chemical damp-proofing agent to combat rising damp in masonry.

Characteristics

excellent water repellence

does not influence permeability to

water vapor

high early water resistance

pressure-free application possible

creates a strong beading effect

highly penetrating

solvent free

horizontal barrier against rising

low soiling tendency

damp

good depth of penetration

prevents salt blooming and

efflorescence

Addition level and

The product can be diluted with ali-

application

phatic und aromatic hydrocarbons

or isoparaffin hydrocarbons.

A dilution of 5 - 20 % on solid con-

tent is recommended.

Chemical

Blend of silanes and modified

description

poysiloxanes

Approx. 100 %

Solvent

Solvent free

Appearance

Light turbid

Clear, liquid

Active substance

Silicone Impregnating Agents

Produkt

RUCOSAN

Match-Code

Application

RUCOSAN

B-WB

B-SK

Silicone Impregnating Agent

Masonry water repellent for the

Masonry water repellent

formulation of water based impreg-

concentrate for the formulation of

nations and primers for mineral

water based impregnations and

substrates

primers for mineral substrates. Chemical damp-proofing agent to combat rising damp in masonry.

Characteristics

excellent water repellence

excellent water repellency

does not influence permeability to

microemulsion concentrate

water vapor

dilutable simply by pouring into

high early water resistance

water

creates a strong beading effect

dilutions must be used within 1 - 2

solvent free

days

low soiling tendency

good depth of penetration

horizontal barrier against rising

prevents salt blooming and

damp

efflorescence

prevents salt blooming and efflorescence

Addition level and

The product is to be diluted with

application

water.

water. For impregnations and damp-

A dilution of 5 - 20 % on solid

proofing agent it is recommended to

content is recommended

dilute the product 1:9 with water.

Chemical

Emulsion of silanes and modified

Blend of silanes and modified poly-

description

polysiloxanes

siloxanes

Approx. 50 %

Approx. 100 %

Solvent

Water

Solvent free

Appearance

Milky, white, liquid

Clear, yellowish to brownish, liquid

Active substance

Silicone Impregnating Agents

Produkt

RUCOSAN

Match-Code

Application

RUCOSAN

B-CM 80

B-CM 40

B-GO

Silicone Impregnating Cream

Anti-Graffiti-Coating

Water repellent in cream form to

Water repellent cream for

Impregnating agent for the

use as a horizontal barrier against

impregnation of mineral substrates

formulation of water based,

rising damp;

like brick, limestone, sandstone but

sacrificial anti-graffiti-coatings

also suitable for impregnation of

also concrete

mineral substrates mainly concrete

Characteristics

very high active content

excellent water repellence

facilitates the removal ofsprayed

highly water-repellent

does not influence permeability to

lacquers (Graffitis)

does not influence permeability to

water vapor

water repellent

water vapor

high early water resistance

influences permeability to

pressure-free application possible

creates a strong beading effect

water vapour marginally

highly penetrating

solvent free

horizontal barrier against rising

good depth of penetration

damp

prevents salt blooming and

efflorescence

Addition level and

The product is used undiluted.

The product is to be diluted 1:1 with

application

It can easily be applied by manual

It is applied by the airless technique

water. It is applied by the airless

injection guns against rising damp

or with brushes, rollers or spatulas

technique or with brushes, rollers to

in walls. The cream is brought

up to 100 - 200 g/m² to the mineral

the mineral substrate.

pressure-free into horizontal

substrate.

The cleaning will be made with hot

drillings.

water.

Chemical

Blend based on silanes and modi-

description

fied polysiloxanes

Approx. 80 %

Approx. 40 %

Solvent

Isoparaffine hydrocarbons

Water

Appearance

White, creamy

Milky, white, liquid

Active substance

Emulsion based on paraffines

Fluorocarbon Impregnating Agents

Produkt

RUCOTEC

Match-Code

Application

Characteristics

RUCOTEC

速

RUCOTEC

速

B-FL 6

B-FO 6

B-FI 6

Fluorocarbon Impregnating

Agent

Water and oil-repellent for the

formulation of solvent-based

impregnations and stain repellents

for natural or artificial stones

water-repellent

oil and grease-repellent

breathable

creates a visible beading effect

good penetration

for all absorbent natural or

artificial stones, such as marble,

travertine, Solnhofen slabs, sand-

stone, concrete blocks, terrazzo,

granite, cotto coverings

virtually invisible after drying

PFOA and PFOS-free

PFOA and PFOS-free dilutable in isopropyl alcohol

Addition level and

The product is diluted by adding

application

polar solvents, such as isopropyl

non-polar solvents, such as white

polar solvents, such as isopropyl

acetate.

spirit or isoparaffins.

alcohol.

For impregnations we recommend

to dilute the product 1:4 to 1:9 with

solvents

solvents.

solvents

Chemical

Fluorocarbon resin in combination

description

with silanes / polysiloxanes

PFOA and PFOS-free

Approx. 25 %

Approx. 20 %

Approx. 27 %

Solvent

Isopropyl acetate

Isoparaffin

Isopropyl alcohol

Appearance

Clear, yellowish, liquid

Active substance

- 息 RUDOLF GROUP - Product Range Construction Chemicals - 2016-01-14 - Page 9 -

Fluorocarbon Impregnating Agents

Produkt

RUCOTEC

Match-Code

Application

RUCOTEC

速

RUCOTEC

速

B-FW 6

B-FA 6

B-FN 6

Fluorocarbon Impregnating Agent

Water and oil-repellent for the

formulation of aqueous

impregnations and stain repellents

for natural or artificial stones

water-repellent

oil and grease-repellent

breathable

creates a visible beading effect

good penetration

for all absorbent natural or

artificial stones, such as marble,

travertine, Solnhofen slabs, sand-

stone, concrete blocks, terrazzo,

granite, cotto coverings

virtually invisible after drying

PFOA and PFOS-free

cationic

anionic

non-ionic

Addition level and

The product is diluted by adding

application

water.

For impregnations we recommend

to dilute the product 1:4 to 1:9 with

water.

Chemical

Fluorocarbon resin

description

PFOA and PFOS-free

Approx. 27 %

Approx. 28 %

Approx. 25 %

Solvent

Water

Appearance

Milky, yellowish, liquid

Characteristics

Active substance

- 息 RUDOLF GROUP - Product Range Construction Chemicals - 2016-01-14 - Page 10 -

Fluorocarbon Impregnating Agents

Produkt

RUCOTEC

Match-Code

Application

Characteristics

RUCOTEC

B-FS 6

B-FS solv.

B-CM FL

Fluorocarbon Impregnating

Agent

Water and oil-repellent for the

Water and oil-repellent in cream

formulation of aqueous

formulation of solvent-based

form;

impregnations and stain repellents

stain repellent for natural or artificial

for natural or artificial stones

stones

improved water-repellence

oil and grease-repellent

breathable

creates a visible beading effect

good penetration

for all absorbent natural or

artificial stones, such as marble,

travertine, Solnhofen slabs, sand-

stone, concrete blocks, terrazzo,

granite, cotto coverings

virtually invisible after drying

PFOA and PFOS-free

cationic

Addition level and

The product is diluted by adding

The product is used undiluted.

application

water.

non-polar solvents, such as white

It is applied by the airless technique

For impregnations we recommend

spirit or isoparaffins.

or with brushes, rollers or spatulas

to dilute the product 1:4 to 1:9 with

For impregnations we recommend

up to 100 - 200 g/m² to the mineral

water.

to dilute the product 1:4 to 1:9 with

substrate

solvents.

Chemical

Fluorocarbon resin in combination

description

with silanes / polysiloxanes

PFOA and PFOS-free

Approx. 38 %

Approx. 44 %

Approx. 40 %

Solvent

Water

Isoparaffin

Appearance

Yellowish, liquid

Clear, yellowish, liquid

White, creamy

Active substance

Powdery Additives

Produkt

RUCOMIN

B-PW

B-PM

Silicone-Hydrophobizing-Powder

Powder Defoamer

Match-Code

Application

Characteristics

Silicone water repellent additive in

Defoamer in powder form for min-

powder form for mineral construc-

eral construction material mixes,

tion material mixes, e.g. premixed

e.g. premixed plasters, mortars,

plasters, mortars, grouts and

joint fillers, screeds and powder

powder paints

paints

water soluble

highly effective

excellent water repellence

silicone free

does not influence permeability to water vapor high early water resistance creates a beading effect low soiling tendency

Addition level and

Required quantity: 0.1 - 0.5 %

(calculated on total formulation)

Chemical

Silanes / Polysiloxanes on a water-

Blend of liquid hydrocarbons and

description

soluble carrier

emulsifiers on an inorganic carrier

100 %

30 %

Solvent

Water

Water-insoluble

Appearance

Yellowish powder

White powder

application

Active substance

- ÂŠ RUDOLF GROUP - Product Range Construction Chemicals - 2016-01-14 Page - 14 -

The following Rudolf Information are separately available in the division construction chemicals: RUCOSIL Silicone additives for pasty masonry coatings

Due to their pore and capillary structure, mineral backgrounds take up moisture when in contact with water. Taken-up water can cause damage. In addition, disintegrating pollutants and micro-organisms penetrate into the building fabric together with the water. A value-maintaining preservation of structures is achieved by high-performance coating systems. These are, first of all, paints and plasters which resist weather, absorb as little water as possible and maintain the breathability of masonry. Under the name ®RUCOSIL RUDOLF offers waterproofing additives that confer optimum protection. Silicone resin binders for paints and plasters as well as silicone waterproofing additives for the most diverse types of coatings increase water repellency and maintain or even improve water vapour permeability.

RUCOSAN Silicone impregnations for mineral substrates

Moisture in masonry, bridges or other architectural buildings is one of the essential factors of structural damage. A precautionary measure against damage caused by moisture is the impregnation with silicones. Silicones attach particularly tight to mineral substrates and can be effective for decades. Silicone impregnations are colourless, do not form films, prevent the penetration of water and maintain the water vapour permeability of construction materials. Silanes, above all, readily spread on surfaces and penetrate very well into the substrate. Silicones are irreplaceble for damp proofing masonry by means of chemical injection. Here silicone impregnating agents are injected into damp walls via boreholes. A hydrophobic zone forms – the capillary rising damp in a wall is stopped and the masonry can dry. Under the trade name ®RUCOSAN RUDOLF develops and produces construction chemicals for protecting and restoring buildings.

RUCOTEC Fluorocarbon Stain-repellent Impregnations

Recently, critical reports on PFTs (perfluorinated surfactants) have been frequently published. The best known representatives of this group are perfluorooctane sulfonic acid (PFOS*) and perfluorooctanoic acid (PFOA*). These substances are watched because they are not degraded in the environment and, as far as toxicity is concerned, have not been thoroughly examined yet. Although, due to their origin (telomerisation), our fluorocarbon polymers do not contain PFOS* and are PFOA*-optimised (perfluorooctanoic acid <1 ppm), they are not completely PFOA*-free. Therefore, we have further optimised our ® RUCOTEC range and have complemented it with new products based on the so-called C6 technology. Perfluorocarbon monomers from telomerisation with a chain length of 6 carbon atoms are used for this purpose. The fluorocarbon polymers made from C6 monomers are PFOS* and PFOA*-free. With the new C6 product range the RUDOLF GROUP is a worldwide leader in the field of ecological stain-repellent impregnations of natural and artificial stones. To distinguish them from standard fluorocarbon polymers, the match-code of the C6-based products includes the figure 6. *) Please visit http://www.rudolf.de/en/ecology/information-on-pfos-and-pfoa/ for further information.

Silicone Resin Coatings based on ®RUCOSIL B-TF or ®RUCOSIL B-MS - Perfect protection and aesthetics The outer walls of most buildings consist of mineral-based construction materials. However, they absorb water very easily due to their pore and capillary structure. Absorbed water can cause severe damages and is a transportation vehicle for pollutants, particularly salts and microorganisms. It forms an ideal breeding ground on which algae grow, salt efflorescence and cracks arise or the coating peels off. But there exists adequate measures to prevent those damages: coatings on the basis of silicone resin binders. Silicone resin coatings are ideally used for the construction and renovation of buildings. This system is proving very popular because of its simple handling, its variety of colour shades and especially because of its persistence and its consistency.

www.rudolf.construction RUDOLF GmbH AltvaterstraĂ&#x;e 58 - 64 82538 Geretsried / GERMANY Tel: +49 8171/53-0 Fax: +49 8171/53-191 E-mail: rudolf@rudolf.de Website: www.rudolf-group.com