Certified Training in iClone and CrazyTalk
1 de 16
http://iclonecertifiedtraining.wordpress.com/
Certified Training in iClone and CrazyTalk Just another WordPress.com weblog
Home Portfolio content Background information iClone and CrazyTalk Certified Training Services Training Testimonials
The Puppeteering Panel Explained in CrazyTalk 5.1 Pro 25 09 2008
Use the Puppeteering Panel to perfect your 2D and 3D facial animation for both CrazyTalk and iClone Hello CrazyTalkers, todays tip focuses on a feature in CrazyTalk Pro known as the Puppeteering Panel. The addition of this feature to CrazyTalk 5.0 was a God-send for animators everywhere 2D and 3D alike, Why? Because the Puppeteering Panel literally allows users to gain control over every facial feature, or muscle if you will, and animate them in the same way you would animate a puppet. For example, you can select just the eyes and click to blink, or grab, click and drag the brows to scowl or lift the eyebrows, or of course, click and drag the Jaw to open and shut the mouth. You get the idea, but for perfecting facial animation for either your 2D CrazyTalk models or for your 3D iClone avatars, mastering the Puppeteering Panel is a must. But don’t worry, it’s really a lot less complicated than it appears to be. The other aspect that lends the Puppeteering Panel a great deal of power when perfecting your facial animation is the fact that CrazyTalk allows you to make as many animation passes or recordings as you like will getting your lip-sync and emotion juussst right. So imagine this, you simply focus on individual areas one at a time to get each facial feature animated exactly the way you wish for your character to emote. Reallusion encourages the use of the Puppeteering Panel so much in fact, that when you click on the Timeline Tab it will automatically open the panel ready for you to use, this tip will explain how to open and edit a few features and their range of animation, while all the time creating and refining your final lip-sync output. Follow the steps below to become more familiar with the Puppeteering Panel or watch the high-speed video. Load a Model in CrazyTalk Select the Script button Click the Timeline Tab Place an Audio Track onto the Timeline either by recording or importing The Puppeteering Panel should already be active, but if not, click the Puppeteering button Click a Facial Feature you wish to begin editing Select the Preview button to see how the feature will be affected before recording
27-09-2008 23:02
Certified Training in iClone and CrazyTalk
2 de 16
http://iclonecertifiedtraining.wordpress.com/
Strike the Spacebar to begin the preview During the preview Click and Drag to animate the feature Strike the Spacebar to end the preview If the animation range is to high click the Edit Property button, for example if the Jaw is the feature you have selected and the mouth opens wider than you would like then use Edit Property to solve that Input a new higher or lower Value to edit the range of the facial feature, then close the window Click the Record button to create an animation pass for that feature Strike the Spacebar to begin recording While recording Click and Drag to animate the feature once again in relation to the wav file Strike the Spacebar again to end the recording Click the Clear Selection button to deactivate the feature Click the next facial feature or features you wish to edit Repeat the recording process and make multiple passes if you like, just use Hotkey: Ctrl + Z to undo the recording after striking Spacebar to end the pass Use the Puppet Profile to quickly select multiple areas to edit at once Click on a Full Face Controller to edit facial and Head Orientation as well Again, Repeat the recording process and make multiple passes if you like Click on either the Head Movement or Camera Movement tools to create animation passes of head movement as well, Note* these movements will not apply to iClone avatar facial animation Right Click the Timeline data Choose Ungroup to edit motion clips on the Timeline after making passes Click and Drag a selection around areas you may wish to save as individual Motion Clips that can later be applied to other models Click the Add button under the Custom Script Tab .ame and Save your CTS file Select the Output button Choose your Media Type Click the Export button from the bottom to render your animation The Puppeteering Panel in CrazyTalk 5.1 Pro is the gateway to great facial animation output in both CrazyTalk and iClone. It should be viewed as the not-so-secret weapon in your facial animation arsenal. There is a CrazyTalk artist out there that I read quoted as saying that, “Sure, you can animate something in 30 seconds with CrazyTalk, but if you spend 2 days refining the animation then it will be perfect.” I thought about that as a Pro CT user, and that guy was spot on. No matter how high you consider your skill level of being in relation to CrazyTalk, the Puppeteering Panel will always help to make your lip-sync and emotion that much better with every additional second you choose to put into your animation. Don’t be hasty, take time and get it right the first time through. Any other notion is well…crazy talk. Below is a high-speed video example of the Puppeteering Panel in action, making multiple animation passes, refining them, saving a custom motion clip and rendering a puppeteered CrazyTalk animation. Now that’s a mouthful. Almost forgot, I use Daz 3D’s Victoria Model in this showcase and there’s also a little something in there for you Leonard Cohen heads by way of Concrete Blonde, you can thank Christian Slater for it. Enjoy!
27-09-2008 23:02
Certified Training in iClone and CrazyTalk
3 de 16
http://iclonecertifiedtraining.wordpress.com/
Comments : No Comments » Categories : CrazyTalk Tip of the Day
Design and Export Web Banners using iClone 3.0 24 09 2008
iClone can be used for all kinds of creative outlets such as Web Banners Hello iCloners, that’s right you read it correct, I said create Web Banners in iClone 3.0. Sorry for the hiatus as well Cloners, but I am back and ready to tackle your real-time issues, and today’s tip focuses on creating Web Banners with your iClone projects by designing custom output sizes at the beginning of your session. I have always viewed iClone as a multifaceted tool capable of producing things beyond awesome movies. For example, iClone is perfect for producing abstract motion graphic backgrounds similar to those the likes of Digital Juice. Don’t believe me? Well, just open up some default particle systems and play around with the camera. Or, there are users out there that only use iClone to create panels for online comics, using only single image output, no video. These are both one of many paths an artist can walk down in the real-time environment when iClone is viewed in this versatile light, and single image output is what creating custom Web Banners in iClone is all about. There are 4 common sizes that are normally used to create and compose banners, they are a Vertical Banner 120×240, a Full Banner 468×60, Large Banner 780×95 and Vertical Tower 160×600. Follow the steps below to see just how to work from the Export Tab first in iClone instead of last or view the high-speed video example. Go to the Export Tab Choose the Image Format, for this example I use JPG Choose the Image Size, for this example I am creating a Large Banner 780×95
27-09-2008 23:02
Certified Training in iClone and CrazyTalk
4 de 16
http://iclonecertifiedtraining.wordpress.com/
Select Assets to place into your image such as Characters, Terrains, Atmospheres, Props, Particles…etc Scrub the Play-head if you have active elements in scene such as Particles or Atmosphere to find a frame you are happy with to render in the final image Return to the Export Tab Click the Export button to render the image .ame and Save the image in a location where you will retrieve it later for use on a website Resize the Image Size to correspond with a new banner size Arrange the assets in scene to compose a new layout and Web Banner design Repeat the rendering and resizing process for as many designs as you like Creating Web Banners in iClone 3.0 is a quick and easy solution to market or showcase your iClone content on your or a friends or business’s website. There are a couple of steps you should also take to ensure you have everything you want exposed in your custom Web Banners, the first is to open your Preferences and turn off MitMap if you are planning on including text in your banner. Sometimes when you use Diffuse and Opacity maps to create text in iClone you will notice a blurred edge, this is because MitMap is checked in the on position, just turn it off and your good to go. Also, using the Diffuse and Opacity maps technique to create text from an external editor is a fast and easy way to include logos or branding in your iClone Web Banners. Below is a high-speed video showcasing the customization and layout of creating Web Banners in iClone 3.0
Comments : No Comments » Categories : iClone Tip of the Day
Animate .on-vehicular objects with Vehicle Helpers in iClone 3.0 20 09 2008
27-09-2008 23:02
Certified Training in iClone and CrazyTalk
5 de 16
http://iclonecertifiedtraining.wordpress.com/
R2D2 astromech droid animated with Arrow Helper in iClone 3.0 Greetings iCloners, you’ve done well to make it this far…sorry, I guess all the Force Unleashed is starting to get to me a bit. Now go and do my bidding….sorry…sorry. Today’s tip focuses on Animating .on-vehicular objects with Vehicle Helpers in iClone 3.0. I know you are all already familiar with the Vehicle Helpers in iClone 3.0 and how they can quickly and easily benefit your productions, but for those that don’t, let me bring ya up to speed, so check it out. There are 4 basic Vehicle Helpers that you can attach objects to, they are a Plane, Helicopter, Car and Arrow Helpers. The difference between them is how they function according to their animation keys in Director Mode. For example, the Helicopter Helper will bank with the function key to go right or left, the Car Helper will curve as it turns left or right, however today we are focused on the Arrow Helper. Why you ask? Because today I want to point out how Helper objects can help you to animate anything…anything that is that you wish to move and function how the helper functions. The Arrow Helper functions kind of like a Tank, it gives models the ability to move forward and backward and pivot on the objects center access…hmm, which would make it perfect for animating those pesky droids…especially astromech driods. For this example I am going to link a Arrow Helper to an R2D2 3D model and animate it in Director mode. To accomplish this on your own, follow the steps below or watch the high-speed video build. Click the Set tab Select the Props button Choose the Custom tab Load the model you wish to animate Click the Template Tab Locate and click the Vehicle Helper folder Double click the Arrow Helper to bring it into the scene Right Click the model you want to link to the and select Link Click Link To Click the Arrow Helper in the scene (A bounding box should flash indicating the link) Locate and select the Link to Sub .ode box (indicated by a [...] icon) Check on Align Position to Parent Select the Arrow Helper again and hide it by clicking Visibility Off Click Director Mode switch out of Editor Mode Place your camera angle Strike space bar to begin recording Use the Arrows to begin moving your model in the scene, notice the pivot function as you turn Animating .on-Vehicular object with Vehicle Helpers in iClone 3.0 will save you time, and might just be more fun than you think once you get the hang of it. Director Mode allows you to Play-to-Create, and Vehicle Helpers can play a big part in that. You can control the speed of each Vehicle Helper by using the + and - keys, this way the droid or any other object you may wish to animate in this fashion, actually moves at the proper speed. Once you are done messing around while traversing a terrain model, (with Follow or Snap To turned on) you then have a bank of footage you then can render and cut into pieces, creating a nice selection of shots that will convey your character has moved along a long distance when using traditional film-making techniques. Below as always is a high-speed video build of this process in action and a bit of a Star Wars throwback Machinima, oh yeah and by now if you haven’t figured out at this blog that iClone is the ultimate Star Wars Fan film production station, well then, go watch some more Star Trek. Long live the DarkSide and Force Grab those droids everybody. As for me I got some neon Rancors to slay! Enjoy!
27-09-2008 23:02
Certified Training in iClone and CrazyTalk
6 de 16
http://iclonecertifiedtraining.wordpress.com/
Comments : 1 Comment » Categories : iClone Tip of the Day
Atmosphere in iClone 3.0 and how to create your own 19 09 2008
Foggy night Atmosphere customized in iClone 3.0 with Sky, Lighting, Fog and Particles Hello iCloners of the blog-o-sphere and beyond, todays tip is a tidbit about Atmosphere in iClone 3.0, what it is and how to create your own. Atmosphere in iClone 3.0 consists of 3 or 4 things, which are Sky, Lighting, Fog and Particles if you so choose. Here’s how it breaks down, let’s say you want to create a generic night scene, the common elements that would be shared such as a dark scene and sky, deep blue perspective and starlight would be the elements that after edited to fit the project, could be saved together as a custom Atmosphere. You see the dark sky would obviously cover the Sky portion, and the darkness would be partially created with custom colored Lighting, the deep blue perspective that makes night appear dark would be developed using Fog, and the starlight itself would be represented by a Particle system. Particles are optional when creating a new Atmosphere, they can be included by checking on the include Emitter to Atmosphere checkbox, but are not included by default, however the other 3 aspects of Atmosphere will be. Once a new collection of settings have been edited and saved, then custom Atmosphere may be applied to any and all terrains to quickly swap out or add a new feel to the entire scene. To create and save your own custom Atmosphere follow the steps below or view the high-speed video build. Load a Terrain model into the scene Go to the Sky button Choose a Sky template that best fits your desired Atmosphere
27-09-2008 23:02
Certified Training in iClone and CrazyTalk
7 de 16
http://iclonecertifiedtraining.wordpress.com/
In the Modify panel Edit the Sky’s default settings to suit your project Select the Stage button Choose the Fog option Check the Fog On box Adjust the Color and Distance Click the Light button Adjust the Light Color Adjust the Ambient Light Color as well Again click the Set button Select the Particle button Particles are optional to include in your Atmosphere but if you wish to you must check on the Add to Atmosphere check box Choose a particle template to place in the scene if you want, for this example I am using a Fog particle Edit the particle emitter settings to fit the Atmosphere you wish to create Click the Play button to review the new collective Atmosphere Once you are pleased with the outcome, click the Stage Tab Select the Atmosphere button Click the Add button in the Content Manager .ame the custom Atmosphere Once you have created a custom Atmosphere in iClone 3.0, you have the awesome ability to swap out the Atmosphere to any terrain you choose, so for example if we have created a night time Atmosphere, you can recall those settings for the Sky, Lighting, Fog, and Particles that you have combined to make the new style. This is great because you can begin to develop multiple versions of Atmospheres, like a misty morning, or a foggy night, or an active volcanic, make any combination you like. Once you have lots to choose from you will always have a 2 click solution to any scene that will allow you to add something that often times seems to be missing, even in some of the best 3D productions out there…proper Atmosphere. Below is a high speed video example of the process of combining the 4 elements and saving custom Atmospheres in iClone 3.0 Enjoy!
Comments : 2 Comments » Categories : iClone Tip of the Day
Lightning Effect by editing Particles in iClone 3.0 17 09 2008
27-09-2008 23:02
Certified Training in iClone and CrazyTalk
8 de 16
http://iclonecertifiedtraining.wordpress.com/
Use a real photo of lightning to create custom particles with only 2 image maps Hello iCloners, today’s tip deals with Editing Particles in iClone 3.0. Particle effects in iClone are image based emitters that have customizable parameters allowing users to make fire burn as high as they like, or fog roll as slow as they want, or in this case I am going to create a Lightning Particle to accompany a rainy scene. This is also a image editing process so you will need to use an external image editor such as Photoshop. A Particles appearance in iClone is based on two image maps, a Diffuse and an Opacity map. I will show you how to customize these images to fit a bolt of lightning using only I photo of a real bolt. Using this method will help you to become more comfortable with createing your own particles and give you a better understanding of how the emitters work, so you can make them work for you. To open, and edit a particle system follow the steps below or watch the high-speed video example. Go to the Set Tab Click the Particle button Select the Template folder Double click the Basic 01particle template Click the Play button to review the default particle animation In the Modify Panel locate and click the Diffuse map to activate it Click the Launch button to open the default image into an external image editor, for this example I use Photoshop Open a custom image to create the new particle design with, for this tip I use a regular photo of lightning Place and Edit the image to suit your needs Save over the temporary file in a JPG format Return to iClone Click the Update button to apply the new image Click the Opacity map to activate it Click the Launch button to open the default opacity image into your external image editor Use the new edited Diffuse map image to create a Black and White Opacity file Save over the temporary opacity file in a JPG format Return to iClone Click the Update button to apply the new opacity image Click the Play button to review the edited particle images Begin to Edit the particle settings in the Modify panel, note that all the following settings may be adjusted to suit your desired particle output Adjust the Start and End Color to fit the lightning, extremely pale blue is best for this Change the Width and Height settings to 5 times higher than wide to ensure your lightning reaches from the sky to the ground in your scene, for this example I use a Width of 300 and Height of 1500 Edit the Life setting to a Minimum value of 3 and Maximum of 124, this is to give the lightning particle the “flicker” it will need by setting a very low Life span Set the Quota to 10 and the Emit Rate to 1 to enhance the “flicker” as well Then give the Emit Volumes for the X and Y axis large values to help spread out the lightning, for this example I use a value of 200 for both Adjust the Position value, but only the Z axis in order to place the particle higher or lower in the scene Set the Spread to the highest value of 179 to help randomly place the Lightning Particle Click Add in the Content Manager to save the custom particle Editing Particle Effects in iClone 3.0 seems to some users to be a little too complicated for their taste, but I can assure them that particles are easy and fun to customize. When you become comfortable with creating new settings and
27-09-2008 23:02
Certified Training in iClone and CrazyTalk
9 de 16
http://iclonecertifiedtraining.wordpress.com/
appearances for particle effects, then you can develop incredible things such as lightning, tornadoes, swarms of creatures, projectiles, motion graphic backgrounds and most anything else you can imagine. The options are limited only to the bounds of your creativity, these are powerful tools that can provide powerful output if you take the time to become familiar with their functionality. Below is a high-speed video build of the production of the Lightning Particle and a rendered showcase example of it in action. Enjoy!
Comments : 2 Comments » Categories : iClone Tip of the Day
iClone 3.03 Patch released, don’t miss it! 16 09 2008
Hey iCloners out there, just a heads up on the new patch available now for your iClone needs. Make sure you upgrade to stay on top of your real-time game, just takes a few seconds and you’ll be set with 3.03 Here’s the link http://www.reallusion.com/iclone/ic_upgrade.asp so pop over and grab it today! Upgrades This upgrade page contains details of the latest release version. Available below are upgrade patches and packs to ensure you have the latest version of iClone3 product installed. A version history is included so you can better understand the new features added or issues solved within a specific release.
Official Release Version: iClone v3.03 Release Date: 15th September, 2008 *Check out the System Requirement and Full Feature Matrix.
27-09-2008 23:02
Certified Training in iClone and CrazyTalk
10 de 16
http://iclonecertifiedtraining.wordpress.com/
Comments : No Comments » Categories : Upgrade Information
Creating 3D Alien Avatars in iClone 3.0 16 09 2008
Alien Avatar created in iClone 3.0 using default content along with the Bone Scale and Head Morphing abilities Greetings iCloners, I come in peace…of mind, the peace of mind that one receives from creating 3D Alien characters for animation and film-making earth purposes in iClone 3.0. In the not so distant past, iClone avatars did not have the ability to Bone Scale and Head Morph, now they do, but still to achieve a nude base 3D Alien you must use the Converging G2 Bodies with G3 Heads technique along with the Bone Scale and Head Morph abilities. The outcome is stellar and a perfect new solution to implanting extra-terrestrial actors into your next sci-fi Machinima feature. To create this style of Alien Avatar inside of iClone 3.0 follow the steps below or watch the high-speed video build of the custom character. Go to the Actor tab Click the Avatar button Select the G2 Jane .ude Human Base model from the Custom folder Go to the Head tab Click the Faces button Select the Violet head from the Template folder Go to the Actor tab again Again in the Faces menu, locate and click the Head option in the Facial Feature portion of the Modify panel Choose the Alien option Adjust the Weight slider to suit the character Click the Eyes button Choose and Edit an eye template to suit your character,for this example the Whites of the eyes have been darkened Click the Teeth button Choose and Edit a teeth template for your character Again click the Faces button and edit each Facial Feature to appear more “Alien-like” Select the Actor Tab and click the Skin button Locate and edit the Hue slider in the Modify panel to customize the color of the skin Click the Avatar button Edit the Bone Scale to fit the character Use the Width, Length and Depth sliders to give the characters features a more “Alien-like” proportion Creating 3D Alien Avatars in iClone 3.0 is a whole other style of characters at your access which in turn opens the door to countless science fiction productions that may have been to much trouble before due to the Alien meshes that would’ve had to have been created in an outside modeling source like Maya or 3D Max. The modeling and rigging alone of the characters would have taken a great deal of time and effort to even get to a starting point for the production, this is no longer an issue by using the new character creation features in iClone 3.0. Now Machinimators and traditional 3D film-makers alike can really shoot and produce in an Alien Nation if they so choose. An entirely new race, an completely new culture, a sci-fi of epic size and scale, nothing is beyond the real-time iClone Galaxy now. All that’s left to do is for
27-09-2008 23:02
Certified Training in iClone and CrazyTalk
11 de 16
http://iclonecertifiedtraining.wordpress.com/
you to choose where in the universe your next story takes place. Below as always is a high speed video of the character build and rendered output of this close encounter of the “Clone-kind.” Enjoy!
Comments : No Comments » Categories : iClone Tip of the Day
The Image Layer and why you’re not using it yet in iClone 3.0 13 09 2008
Tie Fighter cockpit created using the new Image Layer option in iClone 3.0 Hello iCloners, today’s tip unveils the true power of the new Image Layer feature in iClone 3.0. This is exactly what it sounds like it is, it’s a Image Layer that is now available to users who wish to add something in front of the camera to create a 1st person feel to their shot. For example, Reallusion provides 4 preset Image Layers that can be applied by default, they include the dashboard of a car, the cockpit of a jet, the scope of a gun, and a TV set. These are a good variety of examples of what the Image Layer can provide to your shot, however, with the right Image Layer you can unlock the door to a whole scene that otherwise just would not be as visually effective. For this example I have revised Reallusions cockpit idea to one that is a little more my speed, that is the cockpit of a Tie Fighter from Star Wars. Image Layers are super easy to create and take almost no time to set up the two image files needed to customize and save your own layer. A Diffuse Map and an Opacity Map are all you need and this can be the make-or-break effect that pushes your audiences sense of disbelief exactly where you want it to go. To master this technique follow the steps below or watch the high speed showcase video. Go to the Stage Tab
27-09-2008 23:02
Certified Training in iClone and CrazyTalk
12 de 16
http://iclonecertifiedtraining.wordpress.com/
Click the Camera button In the Modify Panel locate and click the Add button Click the Image Layer button Open Photoshop (or other image editor of your choice) Open an image you want to convert to an Image Layer, for this example I am using a screen shot of a Tie Fighter cockpit .ame and Save in the JPG format for use as the Diffuse Map Use the same image and create a Opacity Map based on where you would like the image to be transparent .ame and Save in the JPG format for use as the Opacity Map Return to iClone Click the Diffuse Map to make it active in the Modify Panel Click the Open button .avigate to the Diffuse image Click the Opacity Map to make it active in the Modify Panel Click the Open button .avigate to the Opacity image Select the Add button under the Content Manager .ame and Save the new Image Layer The Image Layer is a very simple feature with powerful 1st person implications and lots of creative options when used with a bit of imagination. Why your probably not using it yet is because just that, it seems to be such a simple little solution, so simple it gets passed over a bit, but you should not let this one go by the wayside, it can really come in handy. I can’t help but to think of that famous scene where a certain Jedi sinks that faithful “whomp-rat” shot to devastate a certain galactic death machine. Remember how the camera would switch back and forth between Vader and the angle of the X-Wings back end, well there’s a great example of the cockpit 1st person shot when used properly. It worked for George, why not you? In the example below you can see a high-speed showcase of an Image Layer being customized, saved and used to chase some Rebel scum. Enjoy!
Comments : No Comments » Categories : iClone Tip of the Day
Develop your Facial Animation in CrazyTalk 5.1 Pro for iClone 3.0 11 09 2008
27-09-2008 23:02
Certified Training in iClone and CrazyTalk
13 de 16
http://iclonecertifiedtraining.wordpress.com/
Are you ready for a change in the way you create detailed Facial Animation for your actors? Hey CrazyTalkers, that’s right, today’s tip focuses on Developing Facial Animation in CrazyTalk 5.1 for iClone 3.0. Using CrazyTalk and iClone together is as natural as Peanut Butter and Jelly, or Bo and Luke Duke. Sure, either one alone is pretty cool, but put the two together and you’ve got a tasty sandwich, some crazy Hill-Billies and a total real-time facial animation solution for your avatars. Here’s how it works, you can create facial animation in iClone alone without CrazyTalk, but when you use CrazyTalk to create your facial animation for iClone you are opened up to a whole new set of editing tools focused only on the facial movement and emotion. With tools like the Puppeteering Panel and the Emotive Library, getting that lip sync and special kind of body language that only ones face can portray is totally possible and fun to develop inside of CrazyTalk. You can use an image of your avatar from iClone as your model in CrazyTalk and then you have an accurate representation of how your avatar will react once the CTS or (CrazyTalkScript) file is applied. For this tip I will show you how to generate this image from iClone, fit it for animation in CrazyTalk, create and edit facial animation using the Timeline in CrazyTalk and then Save the animation for further application in iClone. To do this follow the steps below or watch the high speed video. Load and Avatar into iClone you want to create detailed facial animation for Strike HotKey: J to activate the Face Cam position Go to the Export Tab Click the Image button Click the Format arrow to choose the JPG format Go to the Export button from the bottom to render the image .ame and Save your image Open CrazyTalk Pro Click the Model button Select the Import Image icon from the left hand navigation Navigate to your JPG image exported from iClone Click Open to import the image to CrazyTalk Crop your image according to the guide Click .ext Align the 4 Feature Points according to the guide Click .ext Choose a Face Profile, use the sliders to adjust levels of Profile and Motion Strength Select OK to apply Open the Advanced fitting mode Refine the Feature points to make sure the Eyes and Mouth are properly aligned Got to the Script Tab Click the Timeline Tab Select the Sound Record button to record your voice with a microphone Click Record to start recording Click Stop to end recording Then either choose Play to review the wav or OK to apply it to the Timeline for editing Or use the Import Wav button to import a sound file, in this example I use a portion of a great speech Use the Puppeteering Panel and Emotive Library to customize the facial animation Make sure the Script tab is selected from the right hand menu and click Add
27-09-2008 23:02
Certified Training in iClone and CrazyTalk
14 de 16
http://iclonecertifiedtraining.wordpress.com/
.ame and Save the new CTS file Return to iClone With the actor selected, go to the Animation Tab Click the Facial Animation button Choose the Custom Folder Double click your new CTS file to apply the custom Facial Animation to your actor Developing your facial animation in CrazyTalk is not only fun and hands down the best way to create quality lip sync in minutes using your own voice or TTS technology, but it is also where iClone facial animation was truly meant to be created. And I’m gonna just go out on a limb and say it, everyone knows that facial animation is usually the first thing some animators are willing to let slide a bit in quality just because of the time it takes to get it right. End result…good character animation and action, great cameras, terrible lip sync, sound familiar? Well, it doesn’t have to be that way and I say, Enough! Down, with poor facial animation, we can do better…with CrazyTalk. There I said it, now prove me right, go make great facial animation faster and more effectively than ever before, if you haven’t seen or used CrazyTalk, I promise you it will bring change to the way you think about facial animation. Below as always is a high speed video showcasing this technique in action. Enjoy!
Comments : No Comments » Categories : CrazyTalk Tip of the Day
Do your characters have anything to Look At in iClone 3.0? 9 09 2008
The new Look At feature in iClone can save you countless hours with just 2 clicks
27-09-2008 23:02
Certified Training in iClone and CrazyTalk
15 de 16
http://iclonecertifiedtraining.wordpress.com/
Hey iCloners, first let me start by saying there is some hullabaloo out there about this blog on the feed today and I just want to say thanks to everyone who are enjoying these tips. I am having a lot of fun producing them. Today’s tip is a pretty quick and easy one but is insanely powerful, it focuses on the new Look At feature in iClone 3.0. This little number is amazing, it’s a two click solution to what used to amount to a ton of painstaking camera work and key-frame character animation. You can simply click the Look At option and then choose your target, which can be another character, or any camera in scene as well as any object. Sound too good to be true? I know it does, but it’s a reality in iClone now, so you should make great use of it for sure. There is also Head and Eye orientation sliders in the Look at Weight and Eye Convergence section that allow you to adjust the position of the Head and Eyes in relation to the targets animation. These functions are something that must be used in conjunction with the Look At feature in order to ensure a desired Look At animation. Think about it, the cameras, actors and objects in your project can really move anywhere you can imagine, so using a little discretion and fine tuning with the Eye and Head and Inward Outward sliders when utilizing this feature and it will make all the difference. To see where to find and how to use this awesome new tool, follow the steps below or see the high speed video. Load an Avatar into your project Add a custom camera or prop to your scene Animate the camera or object in the scene Select your avatar by double clicking it In the Modify panel scroll down and locate the Look At portion of the menu To Look At the Camera select the Look at Cam option To Look At the animated Prop select the Pick Target button Then Click on the Prop in the scene, notice a bounding box will flash indicating the link was a success Scrub your animation to review the characters Look At animation Use the Look at Weight and Eye Convergence sliders to edit the animation if you see that the Head or Eyes are reacting in an unwanted fashion Click the Set Free button at any point in the animation to allow the character to Look At multiple objects or cameras The new Look At feature in iClone 3.0 is the perfect way to create lots of interesting crowd reactions, individual character recognition, first person fight scenes, and I could go on and on. The time saved by using this option allows you to animate scenarios that just would have been too much work otherwise just to get your characters all to Look At something. But those days are long gone, and another limitation just became a thing of the past thanks to this innovative solution provided only in iClone 3.0. Below as always is a high speed video showcasing this method in action, one for the kid in us all. Notice how the emotion of the child is in a very real way translated by Look At. Enjoy!
Comments : No Comments » Categories : iClone Tip of the Day
27-09-2008 23:02
Certified Training in iClone and CrazyTalk
16 de 16
http://iclonecertifiedtraining.wordpress.com/
« Previous Entries
Archives September 2008 August 2008
Blogroll Creators of iClone and CrazyTalk Custom Avatar Designer iClone Fan Community Machinima Animation Studio
Recent Posts The Puppeteering Panel Explained in CrazyTalk 5.1 Pro Design and Export Web Banners using iClone 3.0 Animate Non-vehicular objects with Vehicle Helpers in iClone 3.0 Atmosphere in iClone 3.0 and how to create your own Lightning Effect by editing Particles in iClone 3.0
Recent Comments jamescmartin on Background information Michele Yorkman-Rame… on Background information rgrove on Animate Non-vehicular objects … jamescmartin on Atmosphere in iClone 3.0 and h… Ricky Grove on Atmosphere in iClone 3.0 and h… Blog at WordPress.com. • Theme: Freshy by Jide
27-09-2008 23:02