2015
Power Tools
PT 2014_UK-version 5.8.indd 1
05.08.14 16:25
PT 2014_UK-version 5.8.indd 2
05.08.14 16:25
CONTENTS / KEY | 3
At Ryobi® we’ve built a solid and enviable reputation by developing a real knowledge of exactly what people need from their power tools. CONTENTS New from Ryobi® 18V ONE+™ Battery Technology ONE+™ 18V Cordless Power Tools ONE+™ 18V Cordless Lawn & Garden Tools 12V Tools 4V Tools Batteries & Chargers Corded Drills Corded Angle Grinders Corded Saws Corded Woodworking Tools Heat Gun Mitre Saws / Table Saw Work Benches Accessory Sets & Accessories
4 – 5 / 14 6 – 7 8 – 19 20 – 25 26 – 27 28 – 29 30 – 31 33 – 34 34 – 35 35 – 36 37 – 40 40 40 – 41 42 43 – 48
KEY XX
Blade width shear
Keyless chuck
Safety clutch
Magnet
Variable speed control
Tool bag
Auxiliary handle
Forward/reverse operation
Carry case
Music / MP3
Electronic brake
Wet vac
Spray
Hammer action
Dry vac
SDS
Telescoping shaft
Hedge trimmer diamond ground
Orbital stroke action
Blower function
Quick blade / bit change
Tool-less shear
Tool-less pruner
Spindle lock
Laser light
LED
Dust extraction
2 gears
Wet blade
Electronic ’Soft Start’
Soft Grip
Torque setting
Charging time
XXcm
XXcm
Cutting path diameter
Low noise
XXcm
Cutting line diameter
Anti-vibration
XXcm
Chainsaw bar length
XXcm XXcm
Hedge trimmer cutting capacity
XXcm
Blade length shear
XXcm
Blade length hedge trimmer
Auto Feed
XXcm
Blade length pruner
3 positions
XX m3/min
Air volume
Weight with battery pack stated are based on the RB18L13 1.3Ah battery pack We continue to offer a 2 year warranty on all our products, including the new products that we have introduced for 2014/2015* *Excluding spares and accessories.
PT 2014_UK-version 5.8.indd 3
All products shown are in compliance with the appropriate European regulations. Warning: All warranties are country/region specific. Tools purchased e.g. in the USA or via the internet, and imported into Europe, which are not CE approved, not only violate EU legislation, but will not be supported/serviced in Europe by Ryobi® as a result. Only tools bought in the European Union (incl. Switzerland) are covered by an European warranty. Ryobi® reserves the right to revise product specifications at any time without notice.
05.08.14 16:25
4 | NEW FROM RYOBI®
New from Ryobi®
The Next Generation: Ryobi® J The new range of Ryobi® jigsaws offers class leading cutting performance, accuracy and ease of use... Accuracy & Performance PROSTROKE PROSTROKE
•
23mm Stroke Length deliver market leading cutting performance
•
49% improvement on cutting accuracy*
•
30% Reduced vibration*
•
4 stage pendulum
•
Powerful 680W Motor 500-3,100spm
•
Depth of Cut: Wood 105mm Steel 12mm
LINEASSIST
49%
LINEASSIST •
•
IMPRO V ON CU EMENT T ACCUR TING ACY
Flip down cut guide provides better line-up with marked line Splinter shield minimises splintering during cutting
FLUSHCUT •
Increased visibility of cut
•
Cut flush to front of tool
•
Aid straight line cutting
STRAIGHTFIN STRAIGHTFIN
•
Aids straight line cutting by up to 65%*
•
Retractable design for convenient storage * RJS1050 model only
RETRAC FIN IMPRTABLE STRAIG OVES H CUTTIN T LINE G BY UP TO
*vs previous Ryobi models PT 2014_UK-version 5.8.indd 4
65%
*
05.08.14 16:25
NEW FROM RYOBI® | 5
bi® Jigsaws 46%
IMPRO V TO VIE EMENT W ANGLEING *
Cut Line Visibility MAXVIEW •
•
46% Improvement to viewing angle and wider visible angle of blade Better control of cut
AIRFORWARD •
•
•
Improved air management allows bevel cutting without dust blown up into face/eyes Re-directs the exhaust air to clear the dust away from cutting area Provides better line of sight
Comfort & Control Ergonomic Handle Up to 30% Smaller* • Micro texture overmould • Detachable Vacuum Port • •
SPEEDCONTROL
30% UP TO
SMALL ER
Variable speed control dial (RJS850-k
•
and RJS1050-K only) •
Easy to reach;
•
Optimised for both left & right-handed users
SURELOCK Single finger blade-clamp operation
•
Sure-lock Indicator (RJS850-k
•
and RJS1050-K only)
Quick & Secured
•
SURELOCK
EASYBEVEL •
Tool-less base bevel adjustment (RJS1050-K only)
•
Larger lever actuation for secured locking
•
Easy access for Quick Bevel Adjustment
Also ava ilab Ryo le... bi's
new DC ji R18 gsaw, t J h cord S-0 wit e h l e ss con v and enience perf corded orm anc e.
*vs previous Ryobi models PT 2014_UK-version 5.8.indd 5
05.08.14 16:25
6 | 18V ONE+™ BATTERY TECHNOLOGY
Intelligent Battery Technology Improved Durability
Improved Performance
Power Management
Longer Run Time
Improved Durability Tough pack design with built in impact protection for long term durability.
Improved Performance Ryobi IntelliCell technology monitors and balances individual cells to maximise run-times, storage life and safety, whilst improving tool performance by up to 10%.
Longer Run Time The Ryobi® 4.0Ah battery is a first in the consumer market and offers up to 95% longer run-times versus our previous technology [BPL1820].
Fuel Guage
Power Management The Ryobi® fuel guage is the simplest way for the user to manage their workload.
PT 2014_UK-version 5.8.indd 6
05.08.14 16:26
18V ONE+™ BATTERY TECHNOLOGY | 7
Longer Run time UP TO
95% MORE
Ryobi® is the only consumer brand offering a 4.0Ah battery pack, which gives the user un-paralleled run time.
Improved Durability
Improved
Performance
Power Management
UP TO
UP TO
ON BOARD
MORE
MORE
MONITORS BATTERY LIFE
50%
10%
FUEL GAUGE
Improved Performance
Run time
put to the test Drilling 16mm holes into 47mm thick timber*
1.5Ah Competitor Battery
Wasted Battery Capacity
1.5Ah Competitor B
1.2Ah Competitor A Number of holes drilled on one battery charge
60
115
135
300
Ryobi’s IntelliCell™ technology monitors and balances individual cells taking away the need for wasteful buffers. This technology ensures every cell is fully charged to maximise run times, storage life and safety, while providing up to 10% more usable power.
* Results dependent on tool, battery and application
PT 2014_UK-version 5.8.indd 7
05.08.14 16:26
CORDLESS POWER TOOLS ONE+™ 18V Tools ONE+™ 18V Cordless Lawn & Garden Tools 12V Tools 4V Tools Battery & Charger Options
PT 2014_UK-version 5.8.indd 8
9 – 18 19 – 24 26 – 27 28 – 29 30 – 31
05.08.14 16:26
18V ONE+™ SYSTEM | 9
Start
Choose a kit…
With ONE+™ buying your first tool is just the beginning…
We offer a range of starter kits with different tools, batteries and charger.
Or Battery and charger… Select a battery & charger and then the tool you want from the range as individual items.
Choose from over 35 garden & power tools Ryobi’s unique ONE+™ system consists of range of over 35 tools for both home and garden that can all be powered using one battery and charger. Buy the tools you want at the time you need them and avoid paying over the odds for excess batteries and chargers. With everything from drills to radios, trimmers to paint sprayers the choice is there for you to grow your family of tools in whatever direction you want.
Save... Buy any tool then expand your family for less. Buy additional tools without batteries and chargers, as a cost effective way to grow your collection.
PT 2014_UK-version 5.8.indd 9
05.08.14 16:26
10 | ONE+™ 18V TOOLS
LLCDI18022
18V 2-Speed Hammer Drill/Driver ● ● ● ●
STARTER KIT
x2
Battery Batterie Batterie Batería Batterij
Combination tool for hammer drilling and screwdriving applications 13mm metal keyless chuck Automatic spindle lock for one-handed bit change Electronic variable speed, reverse and brake for total control
2x BATTERY KIT
Voltage (V) No. of batteries supplied Charger supplied Max. torque (Nm) Chuck capacity (mm) No load speed gear 1 (rpm) No load speed gear 2 (rpm) Max. drilling wood (mm) Max. drilling steel (mm) Max. drilling masonry (mm) Torque settings Weight with battery pack (kg) Supplied in Article Number EAN Code
18 ≠2 45 min 50 13 0-400 0-1550 38 13 13 24 1.93 Tool bag 5133001955 4892210124609
Included as standard 2 x 18V 1.3Ah Compact Lithium-Ion batteries, 1 hour super charger, 1 x double ended screwdriver bit, tool bag
RCD18021L
18V 2-Speed Drill/Driver ● ●
● ● ● ●
STARTER KIT
x1
Battery Batterie Batterie Batería Batterij
x0
Battery Batterie Batterie Batería Batterij
13mm keyless chuck for greater accessory compatibility Electronic variable speed, reverse and brake for total control Automatic spindle lock for one-handed bit change 2 gears for most materials and applications Quick adjustment 24 torque settings Magnetic bit holder and LED light
Also available without battery as: RCD1802M
1x
Voltage (V) No. of batteries supplied Charger supplied Max. torque (Nm) Chuck capacity (mm) No load speed gear 1 (rpm) No load speed gear 2 (rpm) Max. drilling wood (mm) Max. drilling steel (mm) Torque settings Weight with battery pack (kg) Supplied in Article Number EAN Code
18 1 60 min 50 13 0-440 0-1600 38 13 24 1.6 Tool bag 5133001954 4892210124593
Voltage (V) No. of batteries supplied Max. torque (Nm) Chuck capacity (mm) No load speed gear 1 (rpm) No load speed gear 2 (rpm) Max. drilling wood (mm) Max. drilling steel (mm) Max drilling masonry (mm) Torque settings Weight with battery pack (kg) Supplied in Article Number EAN Code
18 ≠0 54 13 0-440 0-1600 38 13 13 24 1.6 – 5133000246 4892210110145
BATTERY KIT
Included as standard 1 x 18V 1.3Ah Compact Lithium-ion battery, 1 hour super charger, 1 x double ended screwdriver bit, tool bag
LCDI1802M
18V 2-Speed Hammer Drill/Driver ●
● ●
●
Combination tool for hammer drilling and screwdriving applications 13mm metal keyless chuck Automatic spindle lock for one-handed bit change Electronic variable speed, reverse and brake for total control
Included as standard 1 x double-ended screwdriver bit, depth stop, auxiliary handle
PT 2014_UK-version 5.8.indd 10
05.08.14 16:26
ONE+™ 18V TOOLS | 11
CDC1802M
18V 2-Speed Drill/Driver ● ●
● ● ● ● ●
x0
Battery Batterie Batterie Batería Batterij
x0
Battery Batterie Batterie Batería Batterij
x0
Battery Batterie Batterie Batería Batterij
10mm keyless chuck Electronic variable speed, reverse and brake for total control Spirit level for precise drilling 2 gears for most materials and applications Quick adjustment 24 torque settings Magnetic screw and bit holder GripZone™ overmould technology for improved comfort with a positive grip
Voltage (V) No. of batteries supplied Charger supplied Max. torque (Nm) Chuck capacity (mm) No load speed gear 1 (rpm) No load speed gear 2 (rpm) Max. drilling wood (mm) Max. drilling steel (mm) Torque settings Weight with battery pack (kg) Supplied in Article Number EAN Code
18 ≠0 – 42 10 0-350 0-1300 32 10 24 1.7 – 5133001057 4892210106292
Voltage (V) No. of batteries supplied Charger supplied Impact rate (ipm) Blow energy (J) No load speed gear 1 (rpm) Max. drilling wood (mm) Max. drilling steel (mm) Max. drilling masonry (mm) Weight with battery pack (kg) Supplied in Article Number EAN Code
18 0 − 0-4000 1.5 0-1000 16 13 12 2.94 − 5133001058 4892210108609
Voltage (V) No. of batteries supplied Charger supplied Chuck capacity (mm) No load speed gear 1 (rpm) Max. drilling wood (mm) Max. drilling steel (mm) Weight with battery pack (kg) Supplied in Article Number EAN Code
18 0 − 10 0-1100 38 10 1.83 − 5133001167 4892210118585
Included as standard 1 x double-ended screwdriver bit
CRH1801M
18V SDS+ Hammer Drill ●
●
●
●
●
●
Pneumatic hammer mechanism delivers 1.5J of impact energy ideal for drilling holes in stone and concrete SDS+ chuck for fast drilling and easy accessory bit changes Powerful 18V motor for maximum performance 2 modes for extra versatility (hammer drill, rotary drill) Non-hammer setting ideal for drilling holes in wood and metal Variable speed, forward and reverse for total control
Included as standard 360° Auxiliary Handle, Depth Stop
RAD1801M
18V Right Angle Drill ● ● ● ● ●
10mm keyless chuck Variable speed, reverse and brake for total control Automatic spindle lock for one-handed bit change LED for illuminated work piece Magnetic drill bit tray for easy storage and access to drill bits
Included as standard 1 x double-ended screwdriver bit
PT 2014_UK-version 5.8.indd 11
05.08.14 16:26
12 | ONE+™ 18V TOOLS
RID1801M
18V Impact Driver ● ● ●
● ● ●
x0
Battery Batterie Batterie Batería Batterij
x0
Battery Batterie Batterie Batería Batterij
x0
Battery Batterie Batterie Batería Batterij
Powerful 220Nm of torque Keyless 6.35mm (1 ⁄4˝) hex drive Impact mechanism designed to drive long screw and lag bolts 3 x LED lights for better visibility Die-cast front gear housing for durability Variable speed, reverse and brake for total control
Voltage (V) No. of batteries supplied Charger supplied Max. torque (Nm) No load speed (rpm) Weight with battery pack (kg) Supplied in Article Number EAN Code
18 0 − 220 0-3200 1.63 − 5133001169 4892210118608
Voltage (V) No. of batteries supplied Charger supplied Max. torque (Nm) No load speed gear 1 (rpm) Impact rate (ipm) Weight with battery pack (kg) Supplied in Article Number EAN Code
18 0 − 265 0-3,000 0-3500 2.09 − 5133000214 4892210108791
Voltage (V) No. of batteries supplied Charger supplied Oscilation angle Oscilation rate (opm) Weight with battery pack (kg) Supplied in Article Number EAN Code
18 0 − 3 Degrees 0-20,000 1.33 − 5133001633 4892210120335
Included as standard 1 x impact bit, 1 x 5⁄8 inch socket adpator
BIW180M
18V Impact Wrench ●
● ● ●
● ●
Up to 265Nm Torque (Max) for heavy duty bolt/nut driving Variable trigger speed for ultimate control Keyless ½˝ Drive Impact mechanism designed to drive long screws and lag bolts LED light for working in dimly lit areas GripZone™ overmould technology for improved comfort with a positive grip
Included as standard ½˝ to ¼˝ adaptor
RMT1801M
18V Multi Tool ● ●
● ●
●
A versatile multi purpose tool with both sanding and cutting heads Quick change attachments for hassle free transition between sanding and sawing LED for illuminated work piece Variable speed for ultimate control across a range of applications Universal accessory adaptor makes the product compatible with any brand of accessories
Included as standard 1 x flush cutting blade, 1 x wood/metal blade, 1 x sanding pad, 6 x sanding sheets, hex key, universal accessory adaptor
PT 2014_UK-version 5.8.indd 12
05.08.14 16:27
ONE+™ 18V TOOLS | 13
RWSL1801M
x0
18V Circular Saw ● ●
● ● ● ●
Battery Batterie Batterie Batería Batterij
Large 45mm cutting depth at 90° Ultra thin TCT Kerf blade reduces power drain and increases cutting performance Ideal for laminate worktops, boards and sheet material Bevel capacity up to 50° Spindle lock for easy blade change Laser guide for accurate cutting
Voltage (V) No. of batteries supplied Charger supplied Blade diameter (mm) Bore size (mm) No load speed (rpm) Max. cutting depth 45˚ (mm) Max. cutting depth 90˚ (mm) Bevel capacity (°) Weight with battery pack (kg) Supplied in Article Number EAN Code
18 0 − 150 10 0-4,700 32 45 50 2.93 − 5133001165 4892210118561
Ideal with:
Included as standard Hex key, 150mm TCT circular saw blade and edge guide
RRS1801M
x0
18V Reciprocating Saw ● ● ● ● ● ●
Battery Batterie Batterie Batería Batterij
Universal saw for cutting a variety of materials Tool-less blade clamp for quick and easy blade changes Variable speed and brake 22mm stroke length Anti vibration technology Adjustable shoe increases blade life
Voltage (V) 18 No. of batteries supplied 0 Charger supplied − Stroke length (mm) 22 No load speed (rpm) 0-3100 Max. cutting capacity wood (mm) 180 Weight with battery pack (kg) 2.33 Supplied in − Article Number 5133001163 EAN Code 4892210118707
Ideal with:
Included as standard 1 x metal blade, 1 x wood blade
R18JS-0
18V Jigsaw ●
●
● ● ● ● ●
25mm stroke length and up to 3,000 strokes per minute give excellent cutting performance 1 handed speed control for easy speed adjustment to suit different applications 4 stage pendulum action for enhanced cutting performance Tool-less blade clamp for quick and easy blade change Lock on switch reduces fatigue LED worklight illuminates the cut line Easy base adjustment for 0° to 45° bevel settings
NEW
x0
Battery Batterie Batterie Batería Batterij
Voltage (V) 18 No. of batteries supplied 0 Charger supplied − Stroke length (mm) 25 No load stroke rate (spm) 1,100 - 3,000 Max. cutting capacity wood (mm) 101 Weight with battery pack (kg) 2.53 Supplied in − Article Number 5133002158 EAN Code 4892210128010 Flush cut blade available: RAK05JSBFC
Included as standard 1 x 10 TPI wood blade, 1 x 14 TPI scrolling blade
PT 2014_UK-version 5.8.indd 13
05.08.14 16:27
14 | NEW FROM RYOBI®
New from Ryobi®
Introducing Air Strike Airstrike Technology provides cordless convenience, eliminating the need for a compressor and bulky air hose. R18N16G-0
16G Finish nailer
The finishing nailer is your best all-around nailer for indoor trim and similar jobs. This is used for mouldings around windows and doors, baseboards, chair rails, furniture & cabinets.
Applications:
• Fencing • Architraves • Baseboards/Heavy Skirting Boards • Light skirting • Door Sets • Staircases • Tile battens • Panelling Mouldings • Dado rails
R18N18G-0
18G Brad nailer
UP TO
60
The brad nailer is lightweight and usually used for precision work and for smaller wood projects, upholstery. While the brads are small, and leave a fairly tiny hole to fill, they hold really well.
NAILS PER MINUTE
Applications: • Trellis • Architraves • Light skirting • Beading • Panelling • Dado rails
R18N16G-0
R18N18G-0
Power 18V Nail length 19 – 65mm Firing Modes Bump & Sequential Angle or Straight straight
Power 18V Nail length 16 – 51mm Firing Modes Bump & Sequential Angle or Straight straight
PT 2014_UK-version 5.8.indd 14
05.08.14 16:27
ONE+™ 18V TOOLS | 15
R18N18G-0
18V 18 Gauge Nailer ●
●
●
● ● ●
● ●
NEW
x0
Battery Batterie Batterie Batería Batterij
x0
Battery Batterie Batterie Batería Batterij
x0
Battery Batterie Batterie Batería Batterij
AirStrike™ Technology provides cordless convenience, eliminating the need for a compressor and bulky air hose Super compact cordless nail gun requires no compressor, air hoses, gas cartridges or maintenance 2 firing modes, sequential mode for precision and bump mode for rapid fastening Fires 18 Gauge (1.2mm head) nails from 16 to 51mm long Maximum fire rate of up to 60 nails per minute Fires up to 600 nail per charge with RB18L15 and 1600 with RB18L40 (based on 50mm nails into pine) Grip-Light technology engages twin LED's by grasping the handle Tool-less depth-of-drive adjustment helps protect work surface and allows proper setting of nail heads
Voltage (V) No. of batteries supplied Charger supplied Magazine capacity brads Nail type (mm) Weight with battery pack (kg) Article Number EAN Code
18 0 − 105 1.2 2.93 5133002093 4892210128058
Voltage (V) No. of batteries supplied Charger supplied Magazine capacity brads Nail type (mm) Weight with battery pack (kg) Article Number EAN Code
18 0 − 100 1.6 3.2 5133002222 4892210128898
Voltage (V) No. of batteries supplied Charger supplied Bore size (mm) No load speed (rpm) Wheel size (mm) Weight with battery pack (kg) Supplied in Article Number EAN Code
18 0 − 22 7500 115 2.58 − 5133001903-DS 4892210123657
Included as standard 500 x 32mm nails, 2 x no mark shoes, reversible belt hook
R18N16G-0
18V 16 Gauge Nailer ●
● ●
● ●
● ● ● ●
NEW
AirStrike™ Technology provides cordless convenience, eliminating the need for a Nosy compressor, bulky air hose or expensive gas cartridges Fires 16 Gauge (1.6mm) nails from 19 to 65mm long 2 firing modes, full sequential mode for precision and contact actuation mode for rapid fastening Grip-Light technology engages LED by grasping the handle Tool less depth of drive adjustment helps protect work surface and allows proper setting of nail heads Dry-fire lockout prevents the tool working without nails loaded Tool-less jam release for easy removal of clear nails Low nail indicator to quickly and easily see when it is time to re-load Belt hook mounts left or right side for added convenience
Included as standard 500 x 50mm nails, 2 x no mark shoes, reverseable belt hook
R18AG-0
18V Angle Grinder ● ● ● ●
3 position handle for easy grinding or cutting Tool-less wheel guard adjustment Spindle lock for easy accessory changing GripZone over-mould for positive control
Ideal with:
Included as standard Auxiliary handle, wrench,wheel guard, 1 x grinding disc
PT 2014_UK-version 5.8.indd 15
05.08.14 16:27
16 | ONE+™ 18V TOOLS
EMS190DCL
18V Mitre Saw ●
●
●
●
●
x0
Battery Batterie Batterie Batería Batterij
Aluminium base provides a good cutting surface Exactline laser guide for improved accuracy Gripzone over mould technology for an improved positive grip Pre-select mitre angles at 0, 15, 22.5, 30 and 40⁰ Up to 100 cuts in 100 x 25mm white pine (using fully charged 18V 4.0Ah battery)
Voltage (V) No. of batteries supplied Charger supplied Blade diameter (mm) Mitre capacity left (˚) Mitre capacity right (˚) Bevel capacity left (˚) Weight with battery pack (kg) Supplied in Article Number EAN Code
18 0 − 190 45 45 45 7.43 − 5133000932 4892210116895
Ideal with:
Included as standard 1 x 24 TCT blade, 1 x clamp, dust bag, wrench
R18I-0
18V Inflator ● ● ● ●
●
x0
Battery Batterie Batterie Batería Batterij
Voltage (V) No. of batteries supplied Charger supplied Hose length (m)
Fast inflation of tyres and large inflatables On board accessory storage Quick deflation mode Digital readout with auto shut off when desired pressure is reached Wrap around hose storage
18 0 − High pressure hose 711mm, High volume hose 756mm
Max. pressure (bar) Weight with battery pack (kg) Supplied in Article Number EAN Code
10.3bar, 150psi 1.71 − 5133001834 4892210122780
Voltage (V) No. of batteries supplied Charger supplied No load speed (rpm) Wheel size (mm) Arbor size (mm) Max. cutting depth 45˚ (mm) Max. cutting depth 90˚ (mm) Weight with battery pack (kg) Supplied in Article Number EAN Code
18 0 − 4500 102 16 16 22 2.6 − 5133000417 4892210110671
Included as standard High pressure hose, high volume hose, 3 x air accessories
LTS180M
18V Tile Saw ● ● ●
● ●
● ● ●
Powerful 18V motor cuts through ceramic, granite, marble and masonry Steel base includes oversized knobs for easy adjustments 102mm (4˝) continuous rim diamond cutting wheel offers precision cutting and prevents chipping Spindle lock for easy cutting wheel changes GripZone™ overmould technology for improved grip and reduced vibration Wrench storage Diamond wheel included Water bottle included
x0
Battery Batterie Batterie Batería Batterij
Included as standard Hex key, water bottle
PT 2014_UK-version 5.8.indd 16
05.08.14 16:27
ONE+™ 18V TOOLS | 17
CPL180M
18V Planer ●
● ● ● ●
●
x0
Battery Batterie Batterie Batería Batterij
x0
Battery Batterie Batterie Batería Batterij
x0
Battery Batterie Batterie Batería Batterij
Chamfering groove in die-cast front shoe for added precision Positive depth adjustment 0 - 0.4mm Additional front handle for greater control Side fence included for precision planing DustTech™ Integrated dust technology for maximum pick-up efficiency GripZone™ overmould technology for improved comfort with a positive grip
Voltage (V) No. of batteries supplied Charger supplied Planing width (mm) Planing depth (mm) Rebate depth (mm) No load speed (rpm) Weight with battery pack (kg) Supplied in Article Number EAN Code
18 0 − 50 0-0.4 13 10,000 2.13 − 5133000195 4892210109149
Voltage (V) No. of batteries supplied Charger supplied Oscilation rate (opm) Sanding pad size (mm) Diameter of orbit (mm) Weight with battery pack (kg) Supplied in Article Number EAN Code
18 0 − 10000 125 (5˝) diameter 2 1.71 − 5133000197 4892210109163
Voltage (V) No. of batteries supplied Charger supplied No load speed (rpm) Weight with battery pack (kg) Supplied in Article Number EAN Code
18 0 − 11000 1.26 − 5133001045 4892210109170
Included as standard side fence, dust bag, wrench, 2 x reversible TCT blades
CRO180M
18V 125mm Random Orbit Sander ● ● ● ● ●
Sanding pad size: 125mm (5") diameter Lock on switch for continuous use Quick-fix hook and loop sanding sheet attachment Body grip design for increased comfort GripZone™ overmould technology for improved comfort with a positive grip
Included as standard 3 x sanding pads
CCC1801M
18V Corner Sander ● ● ● ●
Sanding pad size: 140 x 100mm Lock on switch for continuous use Quick-fix hook and loop sanding sheet attachment GripZone™ overmould technology for improved comfort with a positive grip
Included as standard Assortment of sanding papers
PT 2014_UK-version 5.8.indd 17
05.08.14 16:27
18 | ONE+™ 18V TOOLS
CCG1801M
18V Caulking Gun ● ● ●
●
● ● ●
x0
Battery Batterie Batterie Batería Batterij
x0
Battery Batterie Batterie Batería Batterij
x0
Battery Batterie Batterie Batería Batterij
200+ tubes of latex per charged battery Switch lock helps prevent accidental start-ups Variable speed adjustment lever for flow control Easy release manual push rod for quick reloading Durable gears and carriage frame help ensure tool longevity On-board puncture tool to brake tube seal if needed GripZone™ overmould technology for improved comfort with a positive grip
Voltage (V) No. of batteries supplied Charger supplied No load speed high (mm/s) No load speed low (mm/s) Max. ouput force (kg) Weight with battery pack (kg) Supplied in Article Number EAN Code
18 0 − 6 1 225 2.13 − 5133000192 4892210109200
Voltage (V) No. of batteries supplied Charger supplied Container capacity (ml) Weight with battery pack (kg) Supplied in Article Number EAN Code
18 0 − 173 1.39 − 5133001030 4892210106322
Voltage (V) No. of batteries supplied Charger supplied Speaker diameter (mm) Speaker output (W) Frequency (Hz) Weight with battery pack (kg) Supplied in Article Number EAN Code
18 0 − 90 3 87.5 - 108 FM 1.05 − 5133000614 4892210114051
Included as standard None
CHV182M
18V Hand Vac ● ● ● ● ●
Cleans up dry spills Go-anywhere, fast cleaner Quick-change replacement filter Easy-clean dust cup GripZone™ overmould technology for improved comfort with a positive grip
Included as standard Crevice and brush attachment
CDR180M
18V MP3 Compatible Radio ● ● ● ● ● ● ● ●
Auxiliary jack - compatible with MP3, CD players, etc Convenient mode selector from FM to auxiliary input On/off switch via volume control dial 10 preset stations Manual and automatic tuning Fold out flexible antenna Low battery indicator 90mm speaker
Included as standard 2 x AAA batteries
PT 2014_UK-version 5.8.indd 18
05.08.14 16:27
ONE+™ 18V TOOLS | 19
RFL180M
18V Flashlight ● ● ● ●
x0
Battery Batterie Batterie Batería Batterij
x0
Battery Batterie Batterie Batería Batterij
Pivoting head for perfect illumination for all tasks Flat base for added stability Soft touch trigger for comfort 4000 Lux for high illumination
Voltage (V) No. of batteries supplied Charger supplied Bulb type Weight with battery pack (kg) Article Number EAN Code
18 0 − Halogen 0.72 5133001637 4892210120199
Voltage (V) No. of batteries supplied Charger supplied Container capacity (ml) Paint coverage sprayer (m²/min) Flow rate (l/h) Weight with battery pack (kg) Supplied in Article Number EAN Code
18 0 − 1000 10 20 2.36 − 5133000155 4892210110589
ting Pivo ad he
Included as standard Spare bulb
P620
18V Speed Sprayer ●
●
●
● ●
● ●
The sprayer's flexible intake tube lets you spray at any angle and use the last remaining paint in the container minimizing wastage Innovative and patented delivery system also minimizes the need for dilution Choose between three spray patterns, horizontal, vertical or round, to provide you with the best coverage whilst minimizing overspray Quick lock container for easy set-up Ideal for exterior walls, garage doors and outbuildings Suitable for use with any brand of paint GripZone™ overmould technology for improved comfort with a positive grip
Included as standard Vertical tip, horizontal fan tip, viscosity & measuring cup, cleaning kit
PT 2014_UK-version 5.8.indd 19
05.08.14 16:27
RLM18X40H240
18V Lithium Fusion™ Lawnmower ●
●
●
● ●
●
The performance of 36V as the Fusion creates 36V performance through two 18V batteries Aerodynamically optimised cutting deck with 40cm metal blade for excellent cutting and mulching performance Vertebrae™ handle design for extended fatigue-free use with drive-by-wire built-in controls Assembles in 5 minutes or less out of the box Quick-release fold-down handle and collapsible grass catcher which stores flat on top of mower As part of the 18V ONE+™ system, the battery is compatible with over 35 tools for the home and garden
NEW
Voltage (V) Battery pack capacity (Ah) No. of batteries supplied Decksize (cm) Blade speed (rpm) Charger supplied Drive mechanism Mulching capable Weight with battery pack (kg) Article Number EAN Code
20 mm-70 mm
Included as standard 4.0Ah 18V battery and charger, 50 litre hard top grass bag, mulching plug
PT 2014_UK-version 5.8.indd 20
40cm
x 2
36 4.0 2 40 3550 2 hr Push Yes 20 5133002099 4892210820815
50L
2hr
4.0Ah
05.08.14 16:27
ONE+™ 18V CORDLESS LAWN & GARDEN TOOLS | 21
OLT1831S
18V Line Trimmer ●
● ●
● ●
NEW
Powerful, easy cutting with 1.6mm cutting line and a 30cm cut capacity Vertebrae™ design for improved comfort during use EasyEdge™ feature offers quick transition between edging and trimming modes Auto feed line advance for added convenience This line trimmer is sold as a bare tool, allowing you to build on your ONE+™ collection without spending additional money on batteries and chargers with each tool purchase
x0
Battery Batterie Batterie Batería Batterij
Voltage (V) Required battery capacity (Ah) No. of batteries supplied Charger supplied Cutting path width (cm) Cutting line diameter (mm) Line feed system Weight with battery pack (kg) Article Number EAN Code
18 1.3 0 – 25-30 1.6 Auto feed 2.14 5133002162 4892210821195
Included as standard 25–30cm
Auto feed spool
RHT1851R15
18V Hedge Trimmer ● ● ●
● ● ● ● ●
NEW
Excellent run time, ideal for gardens of up to 300 square metres in size Powerful cutting performance due to the high-torque motor Lightweight and perfectly balanced unit thanks to the battery's central location in the tool Rotating rear handle offers ease of use in multiple positions Excellent cutting quality through precision diamond ground blade Anti-jamming system prevents accidental blocking HedgeSweep™ attachment offers easy removal of clippings As part of the 18V ONE+™ system, the battery is compatible with over 35 tools for the home and garden
Voltage (V) Battery pack capacity (Ah) No. of batteries supplied Charger supplied Max. cutting capacity (mm) Blade speed (rpm) Blade length (cm) Battery type Weight with battery pack (kg) Article Number EAN Code
PT 2014_UK-version 5.8.indd 21
18 1.5 1 60 min 18 2700 50 Li-ion 3.15 5133002110 4892210820754
1hr
Included as standard 1.5Ah 18V battery and charger, auto feed spool, HedgeSweep™ attachment, blade sheath
1.6mm XXcm
50cm
18mm
18 Ah
05.08.14 16:28
PT 2014_UK-version 5.8.indd 22
05.08.14 16:28
ONE+™ 18V CORDLESS LAWN & GARDEN TOOLS | 23
RLT1830H13
18V Hybrid Line Trimmer ●
●
● ●
● ● ●
Innovative 18V Hybrid power, offers the choice of seamlessly changing between corded and cordless power in the same tool Powerful cutting with 1.6mm line and adjustable cutting width from 25-30cm for great versatility and run time optimisation Vertebrae™ design for improved comfort during use EasyEdge™ feature allows the user to quickly transition between edging and trimming modes Auto feed line advance for added convenience Battery charges in 45 minutes As part of the 18V ONE+™ system, the battery is compatible with over 35 tools for the home and garden
NEW
Voltage (V) Required battery capacity (Ah) No. of batteries supplied Charger supplied Cutting path width (cm) Cutting speed (rpm) Line feed system Weight with battery pack (kg) Article Number EAN Code
18 1.3 1 45 min 25-30 9000-8000 Auto feed 2.8 5133002103 4892210820792
45 min
Included as standard 25–30cm
1.3Ah 18V battery and charger, auto feed spool, 8m cable
RLT1825Li
18V Line Trimmer ● ● ● ● ●
Two handle design for improved user comfort EasyEdge for quick transition to edging mode 25cm cutting path for efficient cutting rate Auto-feed line advance for added convenience As part of the 18V ONE+™ system, the battery is compatible with over 35 tools for the home and garden
Voltage (V) Battery pack capacity (Ah) No. of batteries supplied Charger supplied Line feed system Cutting path width (cm) Cutting line diameter (mm) Weight with battery pack (kg) Article Number EAN Code
PT 2014_UK-version 5.8.indd 23
18 1.3 1 3 hr Auto feed 25 1.6 1.65 5133001807 4892210818430
3hr
Included as standard 1.3Ah 18V battery and charger, auto feed spool
1.6mm XXcm
25cm
1.6mm XXcm
18 Ah
05.08.14 16:28
24 | ONE+™ 18V CORDLESS LAWN & GARDEN TOOLS
OHT1855R
18V Hedge Trimmer ● ●
● ● ● ● ● ●
NEW
x0
Battery Batterie Batterie Batería Batterij
Powerful cutting performance due to the high-torque motor Lightweight and perfectly balanced unit thanks to the battery's central location in the tool Rotating rear handle offers ease of use in multiple positions Excellent cutting quality through precision laser cut, diamond ground blade Anti-jamming system prevents accidental blocking HedgeSweep™ attachment included offers easy removal of clippings Auto feed line advance for added convenience This hedge trimmer is sold as a bare tool, allowing you to build on your ONE+™ collection without spending additional money on batteries and chargers with each tool purchase
Voltage (V) Required battery capacity (Ah) No. of batteries supplied Charger supplied Max. cutting capacity (mm) Blade speed (rpm) Blade length (cm) Battery type Weight with battery pack (kg) Article Number EAN Code
18 1.3 0 − 22 2700 55 − 2.8 5133002161 4892210821249
Included as standard 55cm
HedgeSweep™ attachment, blade sheath
OHT1850X
x0
18V Long Reach Hedge Cutter ●
● ● ●
na itio os
Voltage (V) Required battery capacity (Ah) No. of batteries supplied Charger supplied Max. cutting capacity (mm) Blade speed (rpm) Blade length (cm) Weight with battery pack (kg) Article Number EAN Code
rticulatin
gh
18 1.3 ≠0 – 16 2400 50 3.73 5133001249 4892210815439
e
ad
4- p
●
4-position articulating head and rotating rear handle for optimum reach in all cutting applications Central trigger for easy use in extended reach position HedgeSweep debris sweeper for easy removal of clippings Auto feed line advance for added convenience This long reach hedge cutter is sold as a bare tool, allowing you to build on your ONE+™ collection without spending additional money on batteries and chargers with each tool purchase
Battery Batterie Batterie Batería Batterij
22mm
Included as standard HedgeSweep™ blade sheath
PT 2014_UK-version 5.8.indd 24
50cm
16mm
05.08.14 16:29
ONE+™ 18V CORDLESS LAWN & GARDEN TOOLS | 25
OPP1820
18V Pole Saw ● ● ● ● ●
x0
Battery Batterie Batterie Batería Batterij
In-line motor for pruning in tight places Extendable shaft for a reach of up to 4 meters 30 degree angled cutting head for safer and easy cutting Auto feed line advance for added convenience This pole saw is sold as a bare tool, allowing you to build on your ONE+™ collection without spending additional money on batteries and chargers with each tool purchase
Voltage (V) Required battery capacity (Ah) No. of batteries supplied Charger supplied Chain bar length (cm) Chain speed (m/s) Weight with battery pack (kg) Article Number EAN Code
18 1.3 ≠0 – 20 5 4.1 5133001250 4892210815446
Included as standard 20cm
Bar and chain oil, scabbard, strap
OBL1802
18V Blower ● ● ● ● ● ● ● ● ●
Accepts 18V ONE+™ NiCad or Lithium-Ion batteries Powerful but quiet blower / sweeper 120mph (193km/h) airflow speed Light weight for easy operation Ergonomic flick switch High speed nozzle design with debris scraper GripZone™ overmould for comfortable grip Auto feed line advance for added convenience This blower is sold as a bare tool, allowing you to build on your ONE+™ collection without spending additional money on batteries and chargers with each tool purchase
x0
Battery Batterie Batterie Batería Batterij
Voltage (V) Required battery capacity (Ah) No. of batteries supplied Charger supplied Airflow speed (l/min) Weight with battery pack (kg) Article Number EAN Code
18 1.5Ah 0 − 120mph (193km/h) 1.6 5133000731 4892210812605
Included as standard 1 x nozzle
PT 2014_UK-version 5.8.indd 25
193km/h
05.08.14 16:29
RCD12011L
12V Drill Driver ● ● ● ● ●
10mm keyless chuck 22 torque settings for perfect screwdriving every time Light and compact - ideal for use throughout the house LED to illuminate the work piece Fuel gauge to indicate power levels
x1
Battery Batterie Batterie Batería Batterij
Voltage (V) No. of batteries supplied Charger supplied Max. torque (Nm) Chuck capacity (mm) No load speed gear 1 (rpm) Max. drilling wood (mm) Max. drilling steel (mm) Torque settings Weight with battery pack (kg) Supplied in Article Number EAN Code
12 1 60 min 25 10 0-715 25 10 22 1.08 Tool bag 5133001157 4892210118509
1x BATTERY KIT
Included as standard 1 x double ended bit, and charger
PT 2014_UK-version 5.8.indd 26
05.08.14 16:29
12V TOOLS | 27
RMT12011L
12V Multi tool ● ● ● ● ●
x1
Battery Batterie Batterie Batería Batterij
A versatile and compact mulit purpose tool with both sanding and cutting heads Quick change attachments for hassle free transition between sanding and sawing LED to illuminate the work piece Fuel gauge to indicate power levels Universal accessory adaptor makes the product compatible with any brand of accessories
Voltage (V) No. of batteries supplied Charger supplied Oscilation angle Oscilation rate (opm) Weight with battery pack (kg) Supplied in Article Number EAN Code
12 1 60 min 3 Degrees 0-20,000 1.07 Tool bag 5133001772 4892210121431
1x BATTERY KIT
Included as standard 1 x flush cutting blade, 1 x wood/metal blade, 1 x sanding pad, 6 x sanding sheets, hex key, universal accessory adaptor, and charger
R12PS-L13S
12V Palm Sander ●
● ● ● ●
x1
Battery Batterie Batterie Batería Batterij
x1
Battery Batterie Batterie Batería Batterij
MicroFiltration Integrated dust technology system for maximum pick up efficiency Unique integrated finger to access hard to reach places Triangular pad design for sanding up to the edge in tight corners Light and compact design fuel gauge to indicate power levels
Voltage (V) No. of batteries supplied Charger supplied No load speed (rpm) Diameter of orbit (mm) Sanding pad size (mm) Weight with battery pack (kg) Supplied in Article Number EAN Code
12 1 60 min 20,000 1.2 124 CM2 0.76 Tool bag 5133002239 4892210129215
1x BATTERY KIT
Included as standard 6x finger sanding sheets, 3x delta sanding sheets, and charger
RRS12011L
12V Multi Purpose Saw ●
● ● ● ●
2-in-1 saw with inter-changeable blade to enable the saw to be used in either reciprocating or jigsaw modes, making it ideal for a range of tasks Variable speed for optimum control in all applications LED to illuminate the work piece Fuel gauge to indicate power levels Safety lock off switch to avoid accidental starting
Voltage (V) 12 No. of batteries supplied 1 Charger supplied 60 min No load speed (rpm) 0-3200 Stroke length (mm) 13 Max. cutting capacity wood (mm) 60 Weight with battery pack (kg) 1.17 Supplied in Tool bag Article Number 5133001161 EAN Code 4892210118523
1x BATTERY KIT
Included as standard 1 x wood blade, 1 x metal blade, 1 x jigsaw blade, and charger
PT 2014_UK-version 5.8.indd 27
05.08.14 16:29
PT 2014_UK-version 5.8.indd 28
05.08.14 16:29
4V TOOLS | 29
CSD4107BG
4V Lithium-Ion Screwdriver ● ● ● ●
●
12 Torque settings LED light for working in dimly lit areas Overmould switch for added comfort GripZone™ overmould technology for improved comfort with a positive grip Secure QuickChange™ chuck with automatic spindle lock for one handed bit changing
Voltage (V) No. of batteries supplied Charger supplied Max. torque (Nm) No load speed gear 1 (rpm) Tool reception Torque settings Weight with battery pack (kg) Supplied in Article Number EAN Code
4 1 10 hr 5 180 1 ⁄4˝ Hex 12 0.47 Tool bag 5133000605-DS 5034716008765
Voltage (V) No. of batteries supplied Charger supplied Max. torque (Nm) Tool reception Torque settings Weight with battery pack (kg) Supplied in Article Number EAN Code
4 1 10 hr 5 1 ⁄4˝ Hex 12 0.47 Kitbox 5133001037 4892210108234
Included as standard 6 piece bit set, and charger
CSD4130GN
4V Lithium-Ion Screwdriver ● ● ● ●
●
●
12 Torque settings LED light for working in dimly lit areas Overmould switch for added comfort GripZone™ overmould technology for improved comfort with a positive grip Secure QuickChange™ chuck with automatic spindle lock for one handed bit changing One screwdriver included per product
Included as standard Gripcase with 30 screwdriver bits, and charger
PT 2014_UK-version 5.8.indd 29
05.08.14 16:29
30 | BATTERY & CHARGER SUMMARY
BATTERY & CHARGER OPTIONS 18V LITHIUM-ION COMPACT BATTERIES
Specification
RB18L13
RB18L15
RB18L40
Description
1 x 18V (1.3Ah) Lithium-ion Battery
1 x 18V (1.5Ah) Lithium-ion Battery
1 x 18V (4.0Ah) Lithium-ion Battery
5133001904 4892210124074
5133001905 4892210124081
5133001907 4892210124104
Specification
RBC18L13
RBC18LL13
RBC18L15
Description
1 x 18V (1.3Ah) Lithium-ion Battery & Super Charger
2 x 18V (1.3Ah) Lithium-ion Battery & Super Charger
1 x 18V (1.5Ah) Lithium-ion Battery & Super Charger
5133001909 4892210124166
5133002065 4892210126870
5133001911 4892210124180
System Battery Chemistry Nr. Code EAN Code
18V LITHIUM-ION BATTERIES & CHARGER KITS
System Battery Chemistry Nr. Code EAN Code
PT 2014_UK-version 5.8.indd 30
05.08.14 16:29
BATTERY & CHARGER SUMMARY | 31
CHARGERS
Specification
BCL14181H
BCS618
Description
Super Charger for both Lithium-ion & NiCad Batteries
6 Port Battery Main足tenance System suitable for Lithiumion & NiCad Batteries
5133001128 4892210117984
5133001033 4892210106001
System Battery Chemistry Nr. Code EAN Code
12V BATTERIES
Specification
BSPL1213
Description
1 x 12V (1.3Ah) Battery
System Battery Chemistry Nr. Code EAN Code
PT 2014_UK-version 5.8.indd 31
5133001732 4892210120687
05.08.14 16:30
CORDED POWER TOOLS Percussion Drills & Rotary Hammer Drill Angle Grinders Saws Multi Tool Sanders, Planers, Router & Heat Gun Mitre Saws / Table Saw Work Benches
PT 2014_UK-version 5.8.indd 32
33 – 34 34 – 35 35 – 36 37 37 – 40 40 – 41 42
05.08.14 16:30
PERCUSSION DRILLS | 33
RPD1200-K
1200W Percussion Drill ● ● ●
● ● ● ●
NEW
Variable speed forward & reverse for total control Compact & lightweight for easy drilling GripZone™ overmould for positive grip and improved comfort Metal gear housing Metal chuck with auto-spindle lock 2-Speed LED
Power input (W) Chuck capacity (mm) No load speed gear 1 (rpm) No load speed gear 2 (rpm) percussion rate gear 1 percussion rate gear 2 Max. drilling wood (mm) Max. drilling steel (mm) Max. drilling masonry (mm) Weight (kg) Supplied in Article Number EAN Code
1200 13 0-1,200 0-3,200 0-19,200 0-51,200 25/50 8/16 18/22 3.15 Kitbox 5133002068 4892210126771
Power input (W) Chuck capacity (mm) No load speed gear 1 (rpm) Max. percussion rate (bpm) Max. drilling wood (mm) Max. drilling steel (mm) Max. drilling masonry (mm) Weight (kg) Supplied in Article Number EAN Code
800 13 0-3,000 0-51,000 34 13 16 1.8 Kitbox 5133002019 4892210125903
Power input (W) Chuck capacity (mm) No load speed gear 1 (rpm) percussion rate gear 1 Max. drilling wood (mm) Max. drilling steel (mm) Max. drilling masonry (mm) Weight (kg) Supplied in Article Number EAN Code
500 13 0-3,000 0-50,000 25 13 13 1.6 − 5133002244 4892210129284
Included as standard 360° Auxiliary handle, depth stop
RPD800-K
800W Percussion Drill ● ● ●
● ●
NEW
Variable speed forward & reverse for total control Compact & lightweight for easy drilling Gripzone™ overmould for positive grip and improved comfort Single sleeve (auto spindle lock) chuck LED
Included as standard 360° Auxiliary handle, depth stop
RPD500-G
500W Percussion Drill ●
●
●
The most compact percussion drill in its class - up to 30% lighter than competition Variable speed forward & reverse for total control GripZone™ overmould for positive grip and improved comfort
NEW
Included as standard 360° Auxiliary handle, depth stop
PT 2014_UK-version 5.8.indd 33
05.08.14 16:30
34 | ROTARY HAMMER DRILL & ANGLE GRINDERS
ERH710RS
NEW
710W SDS-Plus Rotary Hammer Drill ● ● ●
●
●
●
Variable speed forward & reverse for total control Rotation stop for light chiselling Hammer stop for drilling into wood, steel, ceramics and screwdriving applications Electronic variable speed, reverse and brake for total control Safety clutch to protect operator if bit jams Livetool Indicator™ glows blue when plugged into the power supply
Power input (W) Chuck type No load speed gear 1 (rpm) Max. percussion rate (bpm) Blow energy (J) Max. drilling wood (mm) Max. drilling steel (mm) Max. drilling masonry (mm) Weight (kg) Supplied in Article Number EAN Code
710 SDS 0-1,100 0-4,000 2 32 13 24 3 Kitbox 5133000527 4892210111593
Power input (W) Disc diameter (mm) Bore size (mm) Spindle size No load speed (rpm) Weight (kg) Supplied in Article Number EAN Code
2000 230 22 M14 6,000 6.0 Kitbox 5133000551 4892210111814
Power input (W) Disc diameter (mm) Bore size (mm) Spindle size No load speed (rpm) Weight (kg) Supplied in Article Number EAN Code
750 115 22 M14 11,000 2.4 − 5133000543 4892210111753
Included as standard 360° Auxiliary handle, depth stop
EAG2000RS
Large Angle Grinder ● ●
●
●
●
●
Full length trigger switch with overmould 180° multi-directional rotating back handle for improved comfort and control Tool-less wheel guard for quick and easy adjustment Two position Auxiliary Handle with wrench storage Spindle Lock for easy wheel changing Livetool Indicator™ glows blue when plugged into the power supply
180°
Included as standard Wrench (x1), wheel guard (x1), auxiliary handle, grinding wheel (x1)
EAG750RS
Small Angle Grinder ● ●
● ● ●
Lock on switch for continued use Tool-less wheel guard for quick and easy adjustment Two position Auxiliary Handle Spindle Lock for easy wheel changing Livetool Indicator™ glows blue when plugged into the power supply
Included as standard Grinding Wheel (x1), Wrench (x1), Wheel Guard, Auxiliary Handle
PT 2014_UK-version 5.8.indd 34
05.08.14 16:30
ANGLE GRINDER & JIGSAWS | 35
EAG600RS
Small Angle Grinder ● ●
●
●
Lock on switch for continued use Powerful 600W motor with a high torque gear box 2 position handle for left or right handed operation Spindle lock and adjustable guard for easy wheel and accessory changing
Power input (W) Disc diameter (mm) Bore size (mm) Spindle size No load speed (rpm) Weight (kg) Supplied in Article Number EAN Code
600 115 22 M14 12,000 2.0 − 5133001153 4892210118424
Included as standard Grinding wheel (x1), wrench (x1), wheel guard, auxiliary handle
RJS1050-K
680W Jigsaw ●
●
● ●
● ●
NEW
Most visible cut line delivered by slim profile, LED and AIRFORWARDS to remove dust High accuracy achieved through PRO STROKE mechanism, 4-stage pendulum action and LINEASSIST SPEEDCONTROL thumb activated speed regulation SURELOCK blade clamp with colour coding makes it clear when the blade is fitted correctly FLUSHCUT blade allows user to cut up to the guard Retractable fin helps straight line accuracy
Power input (W) 680 Stroke length (mm) 23 No load speed (rpm) 500-3,100 Max. cutting capacity wood (mm) 105 Max. cutting capacity steel (mm) 12 Weight (kg) 2.2 Supplied in Kitbox Article Number 5133002220 EAN Code 4892210128362
Flush cut blade available: RAK05JSBFC
Included as standard x1 wood blade, x1 flush cut blade, x1 dust port
RJS750-G
500W Jigsaw ●
●
●
●
NEW
Most visible cut line delivered by slim profile and AIRFORWARDS to remove dust High accuracy achieved through PRO STROKE mechanisms and LINEASSIST Quick Lock one finger blade clamp allows user to change blade easily Most compact and comfortable jigsaw wtih ergonomic handle and detachable vacuum port
Power input (W) 500 Stroke length (mm) 19 No load speed (rpm) 0-3,000 Max. cutting capacity wood (mm) 75 Max. cutting capacity steel (mm) 6 Weight (kg) 1.8 Supplied in − Article Number 5133002216 EAN Code 4892210128300
Flush cut blade available: RAK05JSBFC
Included as standard 1 x wood blade, 1 x hex key, x 1 dust port
PT 2014_UK-version 5.8.indd 35
05.08.14 16:30
36 | RECIPROCATING SAW & CIRCULAR SAWS
ERS80VHG
Reciprocating Saw ● ● ● ●
Variable speed trigger for ultimate control Metal gear box for strength and durability Tool-less, fast and easy blade change Livetool Indicator™ glows blue when plugged into power supply
Power input (W) 800 Stroke length (mm) 28 No load speed (rpm) 500 – 3,000 Max. cutting capacity wood (mm) 150 Max. cutting capacity aluminium (mm) 12 Max. cutting capacity steel (mm) 10 Weight (kg) 2.8 Supplied in Kitbox Article Number 5133000368 EAN Code 48922101112316
Included as standard 3 x reciprocating blades
RWS1250-G
66mm Circular Saw ●
● ● ● ●
Compact, lightweight and ergonomic design for comfortable, repetitive cutting Adjustable base for 0°-45° bevel settings Adjustable depth setting for efficient cutting Onboard wrench storage Livetool Indicator™ glows blue when plugged into power supply
Power input (W) Blade diameter (mm) Bore size (mm) Max. cutting depth 90˚ (mm) Max. cutting depth 45˚ (mm) Bevel capacity (°) No load speed (rpm) Weight (kg) Supplied in Article Number EAN Code
1250 190 16 66 50 45° 5,000 3.7 − 5133002243 4892210129314
Power input (W) Blade diameter (mm) Bore size (mm) Max. cutting depth 90˚ (mm) Max. cutting depth 45˚ (mm) Bevel capacity (°) No load speed (rpm) Weight (kg) Supplied in Article Number EAN Code
1150 170 20 55 38 45° 5,600 4.7 − 5133000553 4892210111470
Included as standard 1 x 20-tooth TCT blade, parallel fence, wrench
EWS1150RS
55mm Circular Saw ● ● ● ● ●
Adjustable base for 0° to 45° bevel settings Spindle lock for easy blade change Adjustable depth setting for efficient cutting Onboard wrench storage Livetool Indicator™ glows blue when plugged into power supply
Included as standard 12-tooth TCT blade, parallel fence
PT 2014_UK-version 5.8.indd 36
05.08.14 16:30
WOODWORKING | 37
RMT200-S
200W Multi Tool ●
●
●
●
UNIVERSAL
A versatile multi purpose tool with both sanding and cutting heads Quick change attachments for hassle free transition between sanding and sawing Variable speed for ultimate control across a range of applications GripZone™ overmould for a positive grip and improved comfort
Power input (W) Oscilation rate (opm) Oscilation angle Weight (kg) Supplied in Article Number EAN Code
200 10,000-20,000 3 Degrees 1.6 Tool bag 5133001819 4892210122636
Power input (W) No load speed (rpm) Diameter of orbit (mm) Sanding pad size (mm) Weight (kg) Supplied in Article Number EAN Code
300 7,000-12,000 2.4 125 1.7 − 5133001145 4892210118332
Power input (W) Oscilation rate (opm) Diameter of orbit (mm) Sanding pad size (mm) Weight (kg) Supplied in Article Number EAN Code
180 0–12,000 2 1.4 Tool bag 5133000531 4892210111692
Included as standard 1 x flush cutting blade, 1 x wood/metal blade, 1 x sanding pad, 6 x sanding sheets, hex key, universal accessory adaptor
ROS300
Random Orbit Sander ● ●
●
● ●
●
Powerful 300W motor Large 2.4mm random orbital base for high levels of stock removal Random orbital action for high levels of stock removal Compact palm grip handle for added comfort Cyclonic action dust box for effective dust collection Livetool Indicator™ glows blue when plugged into power supply
Included as standard 5 x quick fix sanding sheets
EMS180RV
Multi Pad Sander ●
● ●
●
●
●
DustTech™ Integrated dust technology system for maximum pick-up efficiency 3 unique operational base options (Delta, 1⁄3 sheet & finger) Unique Integrated Finger to access hard to reach places Triangular pad design for sanding up to the edge in tight corners 1⁄3 Sheet option to sand large areas quickly (use either hook and loop or standard paper in clamp) Livetool Indicator™ - Glows blue when plugged into the power supply
3 - i n -1
Included as standard 5 x delta hook & loop pads, 5 x third-sheet hook & loop pads, 5 x finger hook & loop pads
PT 2014_UK-version 5.8.indd 37
05.08.14 16:30
38 | WOODWORKING
EPS80RS
Palm Sander ● ●
● ●
●
Compact palm grip handle for added comfort DustTech™ Integrated dust technology system for maximum pick-up efficiency Integrated Finger to access hard to reach places Triangular pad design for sanding up to the edge in tight corners Livetool Indicator™ glows blue when plugged into the power supply
Power input (W) Oscilation rate (opm) Diameter of orbit (mm) Sanding pad size (mm) Weight (kg) Supplied in Article Number EAN Code
80 12,000 1.6 99 x 149 0.9 Tool bag 5133000529 4892210111678
Power input (W) Oscilation rate (opm) Diameter of orbit (mm) Sanding pad size (mm) Weight (kg) Supplied in Article Number EAN Code
280 7,000-12,000 2 93 x 185 1.7 Tool bag 5133000535 4892210111739
Power input (W) Oscilation rate (opm) Diameter of orbit (mm) Sanding pad size (mm) Weight (kg) Supplied in Article Number EAN Code
200 12,000 2 93 x 185 1.5 − 5133002245 4892210129277
Included as standard 5 x delta sander hook & loop pads, 5 x finger hook & loop pads
ESS280RV 1
⁄ 3 Sheet Sander
●
● ●
● ● ●
Powerful cyclonic action technology for maximum dust pick-up efficiency Quick-fix hook and loop sanding sheet attachment Clamping Sheet attachment to maximise sanding paper choice Low Vibration for smoother control and finishing Variable Speed for total sanding control Livetool Indicator™ glows blue when plugged into the power supply
Included as standard 2 x 60, 1 x 100 and 1 x 150 grit sanding sheets
ESS200RS 1
⁄ 3 Sheet Sander
●
●
●
●
●
Powerful cyclonic action technology for maximum dust pick-up efficiency Quick-fix hook and loop sanding sheet attachment Clamping Sheet attachment to maximise sanding paper choice Low Vibration for smoother control and finishing Livetool Indicator™ - Glows blue when plugged into the power supply
Included as standard 2 x 60, 1 x 100 and 1 x 150 grit sanding sheets
PT 2014_UK-version 5.8.indd 38
05.08.14 16:30
WOODWORKING | 39
EOS2410NHG 1
⁄4 Sheet Palm Sander
● ●
●
●
● ●
●
Powerful 240W motor Quick-fix hook and loop sanding sheet attachment with paper clamps Die-cast aluminium base for strength and durability Overmould ON/OFF switch for durability and ease of use Compact palm grip handle for added comfort DustTech™ Integrated dust technology system for maximum pick-up efficiency Livetool Indicator™ glows blue when plugged into power supply
Power input (W) Oscilation rate (opm) Diameter of orbit (mm) Sanding pad size (mm) Weight (kg) Supplied in Article Number EAN Code
240 14,000 1.6 110 x 114 1.6 Kitbox 5133000349 4892210111081
Power input (W) Belt speed (rpm) Belt width (mm) Sanding pad size (mm) Weight (kg) Supplied in Article Number EAN Code
800 150-320 76 76 x 533 3.3 Kitbox 5133001147 4892210118295
Power input (W) Planing depth (mm) Planing width (mm) Rebate depth (mm) No load speed (rpm) Weight (kg) Supplied in Article Number EAN Code
750 2 82 0-12 16,000 3.2 Kitbox 5133000353 4892210111128
Included as standard 2 x 60, 2 x 100 and 2 x 150 grit sanding sheets, paper punch pad, dust bag
EBS800V
76mm (3˝) Belt Sander ●
●
●
● ●
Powerful 800W motor with variable speed for rapid stock removal Quick change belt system for easy tracking set-up Cyclonic action dust box for effective dust collection 4 position adjustable handle Livetool Indicator™ glows blue when plugged into power supply
Included as standard 1 x 60 grit sanding sheet, 1 x 100 grit sanding sheet, 1 x 120 grit sanding sheet, 2 x G-clamps, sanding frame, stopper, sanding frame
EPN7582NHG
750W Planer ●
● ●
●
●
●
3 chamfering grooves (0.5,1,1.5mm) in die-cast front shoe for added precision Double sided fence for precision planing Overmould dust extraction switch for left or right port Full length trigger with overmould for greater control DustTech™ Integrated dust technology system for maximum pick-up efficiency Livetool Indicator™ glows blue when plugged into power supply
Included as standard 2 x TCT blades, dust bag, side fence, wrench
PT 2014_UK-version 5.8.indd 39
05.08.14 16:30
40 | WOODWORKING
ERT1400RV
6.35mm (1 ⁄4˝) 1400W Router ●
● ●
●
●
Fine height adjustment for precision control and repeatable cutting Height adjustment control in table mode Powerful 1,400 Watt motor with soft start and variable speed to give user ultimate control Transparent chip deflector allows you to safely see line of cut Livetool Indicator™ - Glows blue when plugged into the power supply
Power input (W) No load speed (rpm) Collet capacity (mm) Plunge capacity (mm) Weight (kg) Supplied in Article Number EAN Code
1400 14,000 – 31,500 6, 6.35 & 8 55 – Kitbox 5133000555 4892210111838
Power input (W) Air flow (l/min) Weight (kg) Supplied in Article Number EAN Code
2000 250/500 l/min 0.7 − 5133001138 4892210118158
Power input (W) Blade diameter (mm) Blade type No load speed (rpm) Mitre capacity left (˚) Mitre capacity right (˚) Bevel capacity left (˚) Bevel capacity right (˚) Weight (kg) Supplied in Article Number EAN Code
2000 254 48-tooth TCT 4,500 50 50 47 2 16.2 − 5133001203 4892210119155
Included as standard Parallel guide, template guide, dust port, 1 x 6mm collet, 1 x 6.35mm collet, 1 x 8mm collet, 1 x wrench, 1 x parallel guide, 1 x template guide
EHG2000
Heat Gun ●
● ● ● ●
Removable front heat shield allows easy access to change accessories Overheat protection sensor Two air flow settings Two heat settings 60 / 600°C Convenient hanging hook
Included as standard 2 x nozzles
EMS254L
254mm (10˝) Compact Slide Mitre Saw with Laser ● ● ● ● ● ● ●
Exactline Laser Technology™ for cutting accuracy 2 LED's for maximum work area illumination Forward sliding bars allow users to work up against a wall Easily stored and transported thanks to ultra compact design Powerful 2000 Watt motor, producing 4.500rpm Extra wide side extensions to support large timber 50 degree left and right mitre capacity
Included as standard 24-tooth TCT blade, extensions, 1 x clamp, dust bag, wrench
PT 2014_UK-version 5.8.indd 40
Max cutting . 90° mitre capacity: / 90 300 x 90 ° bevel 90° mitre mm / 45° beve l 300 45° mitrex 58mm / 90° beve l 200 45° mitrex 90mm / 45 200 x 58m° bevel m
05.08.14 16:30
WOODWORKING | 41
EMS216L
216mm (71 ⁄ 5˝) Compact Slide Mitre Saw with Laser ● ● ●
●
● ● ●
Exactline Laser Technology™ for cutting accuracy 2 LED’s for maximum work area illumination Forward sliding bars allow users to work up against a wall Easily stored and transported thanks to ultra compact design Powerful 1500 Watt motor, producing 4,500rpm Extra wide side extensions to support large timber 50 degree left and right mitre capacity
Power input (W) Blade diameter (mm) Blade type No load speed (rpm) Mitre capacity left (˚) Mitre capacity right (˚) Bevel capacity left (˚) Bevel capacity right (˚) Weight (kg) Supplied in Article Number EAN Code
1500 216 48-tooth TCT 5000 50 50 47 2 13 − 5133001257 4892210119377
Max cutting . 90° mitre capacity: / 90 70 x 270m° bevel m 90° mitre / 45 48 x 270m° bevel m 45° mitre / 90° beve l 70 x 45° mitre 185mm / 45 48 x 185m° bevel m
Included as standard 48-tooth TCT blade, extensions, 1 x clamp, dust bag, wrench
RTS1800EF-G
1800W Table Saw ● ● ● ●
●
●
●
●
●
●
●
NEW
Poweful 1800W motor for easy cutting Die cast aluminium table for perfect support and accurate cutting Extendable side fence allows increased material support up to 510mm Front and rear locking side fence for accurate and precise cutting Dual purpose handle for quick and easy height and/ or bevel adjustment Overload protection ensures long term durability and added safety Soft start ensures the product is easy to use and protects long term durability Mitre gauge allows precise angle to be cut quickly and easily between +60° and -60° Built in tool box for additional accessory storage Deluxe collapsible stand with wheels for easy storage and transportation LiveTool Indicator™ glows blue when plugged into the power supply
Power input (W) No load speed (rpm) Blade width (mm) Blade type Bore size (mm) Max. cutting depth 45˚ (mm) Max. cutting depth 90˚ (mm) Table dimensions with extensions (mm) Weight (kg) Supplied in Article Number EAN Code
1,800 4,500 254 48-tooth TCT 30 58 84 560 x 710 26.8kg − 5133002026 4892210126009
Included as standard 48-tooth TCT blade, Deluxe collapsible stand
PT 2014_UK-version 5.8.indd 41
05.08.14 16:30
42 | WORK BENCHES
RWB02
Adjustable Folding Work Bench ●
●
● ●
●
Quality bamboo provides a great and naturally durable work surface Pivoting boards for heavy duty clamping Quick guide measurements Foldable for easy storage and portability Multiple clamp settings
Dimensions (mm) Weight (kg) Supplied in Article Number EAN Code
605 x 120 x 180 6.5 − 5133001779 4892210121721
Dimensions (mm) Weight (kg) Supplied in Article Number EAN Code
600 x 570 x 760 tbc − 5133001780 4892210121738
Included as standard 4 x clamps, spanner
RWB03
Adjustable Metal Folding Work Bench ● ●
● ●
●
●
Four position tiliting work surface (0°, 25°, 50°, 80°) Seven level height adjustment to suit all applications Steel and aluminium work surface Quick release lift boards for increased clamping area Sliding clamping system for maximum versatility Foldable work bench for easy storage and portability
Included as standard 4 x clamps, spanner
PT 2014_UK-version 5.8.indd 42
05.08.14 16:31
ACCESSORY SETS | 43
NEW RAK16FP
RAK17SDC
RAK22QC
16pcs Flat Pack Furniture Accessory Kit
17pcs Colour Coded Screwdriver Accessory Kit
22 Piece Quick-Change Set
Contains
Contains ●●
●●
25mm screwdriver bits x 15 Hex 4 x 2, Hex 5 x 2, Hex 6 x 1, PH1 x 1, PH2 x 1, PH3 x 1 PZ1 x 1, PZ2 x 2, PZ3 x 2, SL4 x 1, SL5 x 1
6 x 25mm Screwdriver Bits 3 x Philips (PH1 – PH3) 3 x Slotted (4mm – 6mm)
●●
7 x 50mm Screwdriver Bits 3 x Philips (PH1 – PH3) 1 x Pozidrive (PZ2) 3 x Slotted (4mm – 6mm)
●●
1 x Quick Change Chuck
●●
3 x Masonry Drill Bits (Hex Shank) 1 x 5mm, 2 x 6mm
●●
1 x 80mm Stubby Screw Guide
●●
4 x HSS Drill Bits (2 – 5mm)
Contains ●●
Mini Quick Change Chuck x 1
●●
25mm screwdriving bits x 13 Hex 3 x 1, Hex 4 x 1, Hex 5 x 1, PH1 x 1, PH2 x 1, PH3 x 1 PZ1 x 1, PZ2 x 1, PZ3 x 1, SL3 x 1, SL4 x 1, SL5 x 2
Magnetic Bit holder (60mm) x 1
Art.-No.: 513200267 EAN Code: 4892210126849
●●
●●
25mm Security bits x 3 TR-15 x 1, TR-20 x 1, TR-25 x 1
Art.-No.: 5132002682 EAN Code: 4892210127198
Art.-No.: 5132002253 EAN Code: 4892210113368
RAK30MIX
RAK40SD
RAK40SDI
30 Piece Mixed Set
40 Piece Driving Set
40pcs Impact Rated Screwdriving Accessory Kit
Contains
Contains
●●
9 x 25mm Screwdriver Bits 3 x Philips (PH1 – PH3) 3 x Pozidrive (PZ1 – PZ3) 3 x Slotted (4mm – 6mm)
●●
1 x 60mm Magnetic Bit Holder
●●
4 x Non Magnetic Nut Drivers 1 x 6mm, 1 x 8mm, 1 x 10mm, 1 x 12mm
●●
5 x Wood Boring Brad Point Drill Bits 1 x 3mm, 1 x 4mm, 1 x 5mm, 1 x 6mm, 1 x 8mm
●●
5 x Masonry Drill Bits 1 x 5mm, 1 x 5,5mm, 1 x 6mm, 1 x 6,5mm, 1 x 7mm
●●
6 x HSS Drill Bits 1 x 2mm, 1 x 2,5mm, 1 x 3mm, 1 x 4mm, 1 x 5mm, 1 x 6mm
Art.-No.: 5132002254 EAN Code: 4892210113375
PT 2014_UK-version 5.8.indd 43
●●
●●
●●
3 2 x 25mm Screwdriver Bits 4 x Philips (PH1 – PH3) 6 x Pozidrive (PZ1 – PZ3) 4 x Hex (3mm – 6mm) 4 x Slotted (5mm – 7mm) 14 x Torx® (TX6 – TX40) 7 x 50mm Screwdriver Bits 2 x Philips (PH1 – PH2) 2 x Pozidrive (PZ1 – PZ2) 3 x Torx® (TX10 – TX20)
Contains ●●
agnetic bit holder x 1 M 60mm x 1
●●
25mm impact driving bits x 32 Hex 3 x 1, Hex 4 x 1, Hex 5 x 1, Hex 6 x 1, PH1 x 1, PH2 x 2, PH3 x 1, PZ1 x 2, PZ2 x 2, PZ3 x 2, SL5 x 1, SL6 x 2, SL7 x 1, TX-6 x 1, TX-7 x 1, TX-8 x 1, TX-9 x 1, TR-10 x 2, TR-15 x 2, TR-20 x 2, TR-25 x 2, TX-30 x 1, TX-40 x 1
●●
50mm impact driving bits x 7 PH1 x 1, PH2 x 1, PZ1 x1, PZ2 x 1, TX-10 x 1, TX-15 x 1, TX-20 x
1 x 60mm Magnetic Bit Holder
Art.-No.: 5132002257 EAN Code: 4892210113337
Art.-No.: 5132002683 EAN Code: 4892210127204
05.08.14 16:31
44 | ACCESSORY SETS RAK08SDS
RAK19HSS
RAK10MB
8 Piece SDS-Plus Masonary Bit Set
19 Piece HSS Bit Set
10 Piece Masonary Bit Set
Contains
Contains
Contains
1 x 5mm SDS Bit 2 x 5,5mm SDS Bit ●● 1 x 6mm SDS Bit ●● 1 x 7mm SDS Bit ●● 1 x 8mm SDS Bit ●● 1 x 10mm SDS Bit ●● 1 x 12mm SDS Bit
●●
●● ●●
1 9 x HSS Drill Bits 1 x 2mm, 2 x 2,5mm, 2 x 3mm, 2 x 3,5mm, 2 x 4mm, 2 x 4,5mm, 2 x 5mm, 2 x 6mm, 1 x 7mm, 1 x 8mm, 1 x 9mm, 1 x 10mm
Art.-No.: 5132002258 EAN Code: 4892210113290
●●
1 0 x Masonry Drill Bits 1 x 4mm, 1 x 5mm, 1 x 5,5mm, 2 x 6mm, 1 x 7mm, 2 x 8mm, 1 x 9mm, 1 x 10mm
Art.-No.: 5132002260 EAN Code: 4892210113283
Art.-No.: 5132002262 EAN Code: 4892210113276
RAK08BP
RAK08QRB
RAK07SB
8 Piece Brad Point Bit Set
10 Piece Router Bit Set
7 Piece Spade Bit Set
Contains ●●
8 x Wood Boring Brad Point Drill Bits (1 – 10mm)
Art.-No.: 5132002259 EAN Code: 4892210113306
Contains 1 x 1⁄4˝ (6,4mm) Straight Cutter ●● 1 x 1⁄2˝ (12,7mm) Straight Cutter ●● 1 x 3⁄4˝ (19,05mm) Straight Cutter ●● 1 x 1⁄2˝ (12,7mm) Core Box Cutter ●● 1 x 1⁄4˝ (6,4mm) Roundover Cutter ●● 1 x 3⁄8˝ (9,5mm) Roundover Cutter ●● 1 x 1⁄2˝ (12,7mm) Dovetail Cutter ●● 1 x 5⁄32˝ (3,97mm) Roman Ogee Cutter ●● 1 x Allen key ●● 1 x 3⁄8˝ Bearing Washer ●●
Contains ●●
7 x Flatwood Spade Bits 1 x 10mm, 1 x 13mm, 1 x 16mm, 1 x 20mm, 1 x 22mm, 1 x 25mm, 1 x 32mm
Art.-No.: 5132002252 EAN Code: 4892210113351
Art.-No.: 5132002255 EAN Code: 4892210113344
PT 2014_UK-version 5.8.indd 44
05.08.14 16:31
ACCESSORY SETS | 45 RAK46MIX
RAK86MIX
RAK69MIX
46pcs Mixed Accessory Kit
86pcs Mixed Accessory Kit
69pcs Mixed Accessory Kit
Contains ●●
Masonry Drill bits x 3 3mm x 1, 6mm x 1, 8mm x 1
●●
HSS Drill Bits (titanium) x 11 1.5mm x 1, 2mm x 1, 2,5mm x 1, 3mm x 1, 3.5mm x 1, 4mm x 1, 4.5 x 1, 5mm x 1, 5.5mm x 1, 6mm x 1, 6.5mm x 1
●●
Magnetic bit holder x 1 60mm x 1
●●
25mm screwdriving bits x 25 Hex 3 x 1, Hex 4 x 1, Hex 5 x 1, PH0 x 1, PH1 x 2, PH2 x 3, PH3 x 1, PZ0 x 1, PZ1 x 2, PZ2 x 3, PZ3 x 1, SL3 x 1, SL4 x 1, SL5 x 1, SL6 x 1, TR-20 x 1, TR-25 x 1, TX-10 x 1, TX-15 x 1, TX-20 x 1, TX-25 x 1, TX-30 x 1, TX-40 x 1, SQ1 x 1, SQ2 x 1
Art.-No.: 5132002686 EAN Code: 4892210127464
Contains Masonry Drill Bits x 9 3mm x 1, mm x 1, 5mm x 2, 6mm x 2, 8mm x 2, 10mm x 1 ●● Wood-boring bradpoint drill bits x 9 3mm x 1, mm x 1, 5mm x 2, 6mm x 2, 8mm x 2, 10mm x 1 ●● HSS Drill Bits (Titanium) x 11 1.5mm x 1, 2mm x 1, 2,5mm x 1, 3mm x 1, 3.5mm x 1, 4mm x 1, 4.5 x 1, 5mm x 1, 5.5mm x 1, 6mm x 1, 6.5mm x 1 ●● Flatwood Spade Bits x 2 16mm x 1, 22mm x 1 ●● Magnetic Bit Holder x 1 60mm x 1 ●● 25mm Screwdriving Bits x 54 Hex 1.5 x 1, Hex 2 x 1, Hex 2. x 1, Hex 3 x 1, Hex 4 x 1, Hex 5 x 1, Hex 5.5 x 1, Hex 6 x 1, PH0 x 1, PH1 x 2, PH2 x 3, PH3 x 2, PZ0 x 1, PZ1 x 2, PZ2 x 4, PZ3 x 2, SL3 x 1, SL4 x 2, SL5 x 1, SL6 x 1, SL7 x 2, TR-10 x 1, TR-15 x 1, TR-20 x 1, TR-25 x 1, TR-27 x 1, TR-30 x 1, TR-40 x 1, TX-10 x 1, TX-15 x 2, TX-20 x 2, TX-25 x 2, TX-27 x 2, TX-30 x 2, TX-40 x 1, SQ1 x 1, SQ2 x 1, SQ3 x 1 ●●
Art.-No.: 5132002688 EAN Code: 4892210127488
Contains ●●
Masonry Dril Bits x 6 3mm x 1, 4mm x 1, 5mm x 1, 6mm x 1, 8mm x 1, 10mm x 1
●●
Wood-boring bradpoint drill bits x 6 3mm x 1, 4mm x 1, 5mm x 1, 6mm x 1, 8mm x 1, 10mm x 1
●●
HSS Drill Bits (Titanium) x 11 1.5mm x 1, 2mm x 1, 2,5mm x 1, 3mm x 1, 3.5mm x 1, 4mm x 1, 4.5 x 1, 5mm x 1, 5.5mm x 1, 6mm x 1, 6.5mm x 1
●●
Flatwood Spade Bits x 2 16mm x 1, 22mm x 1
●●
Magnetic Bit Holder x 1 60mm x1
●●
25mm screwdriving bits x 43 Hex 1.5 x 1, Hex 2 x 1, Hex 2.5 x 1, Hex 3 x 1, Hex 4 x 1, Hex 5 x 1, Hex 6 x 1, PH0 x 1, PH1 x 2, PH2 x 3, PH3 x 2, PZ0 x 1, PZ1 x 2, PZ2 x 5, PZ3 x 2, SL3 x 1, SL4 x 1, SL5 x 1, SL6 x 1, SL7 x 1, TR-10 x 1, TR-15 x 1, TR-20 x 1, TR-25 x 1, TX-10 x 1, TX-15 x 1, TX-20 x 1, TX-25 x 1, TX-30 x 1, TX-40 x 1, SQ1 x 1, SQ2 x 1, SQ3 x 1
Art.-No.: 5132002687 EAN Code: 4892210127471
PT 2014_UK-version 5.8.indd 45
05.08.14 16:31
46 | ACCESSORY SETS RAK06RB
RAK07HS
RAK05JSBFC
6 Piece Recip Blade Kit
7 Piece Hole Saw Kit
5 Piece Jigsaw Blade Kit
Contains
Contains
●●
1 x 100mm Thin Recip Saw Blade Medium-thick metal cutting 14TPI
●●
6 x 6˝ (152mm) Recip Saw Blade 1 x Wood cutting 10TPI, 1 x Metal cutting 24TPI 1 x Metal cutting 14TPI, 1 x Pruning blade 4 – 5TPI 1 x Universal cutting 10TPI
5 x Hole saws 1 x 1–1⁄4˝ (32mm), 1 x 1–1⁄2˝ (38mm), 1 x 1–3⁄4˝ (45mm), 1 x 2˝ (50mm), 1 x 2–1⁄8˝ (54mm) ●● 1 x Mandrel ●● 1 x Allen key ●●
Art.-No.: 5132002548 EAN Code: 4892210119292
NEW
Contains ●● ●● ●●
1 x 102mm Flush Cut (10 TPI) 2 x 102mm Reverse Cut (10 TPI) 2 x 102mm Scroll Cut (14 TPI)
Art.-No.: 5132002697 EAN Code: 4892210128966
Art.-No.: 5132002547 EAN Code: 4892210119285
RAK13MT
RAK02MT
RAK10MT
13 Piece Multi Tool Accessory Set
2 Piece Multi Tool Blade Set
10 Piece Multi Tool Sanding Set
Contains
Contains
Contains
●●
1 x Flush Cut Wood / Metal Blade 3-1⁄2˝ (~89mm)
●●
1 x Flush Cut Wood / Metal Blade 3-1⁄2˝ (~89mm)
●●
1 x 1- ⁄8˝ Plunge Cut Wood / Metal Blade 1-1⁄8˝ (~29mm)
●●
1 x 1- ⁄8˝ Plunge Cut Wood / Metal Blade 1-1⁄8˝ (~29mm)
●●
1 x Scraper Blade 2˝ (~50mm)
Art.-No.: 5132002595 EAN Code: 4892210120816
●●
Sanding Paper (for wood) 3 x Grit 60, 3 x Grit 80, 4 x Grit 120
1
1
●●
Sanding Paper (for wood) 3 x Grit 60, 3 x Grit 80, 4 x Grit 120
Art.-No.: 5132002600 EAN Code: 4892210120823
Art.-No.: 5132002599 EAN Code: 4892210120809
PT 2014_UK-version 5.8.indd 46
05.08.14 16:31
ACCESSORY SETS | 47 BSS76A2
RO125A10
2 Piece 3˝ Sanding Belt Set
10 Piece 125mm Sanding Discs for Random Orbit Sanders
Contains ●●
Contains ●●
2 x 3˝ (~76mm) Sanding Belt 1 x Grit 60, 1 x Grit 80
10 x 125mm RO Sanding Disc 2 x Grit 100, 3 x Grit 120, 3 x Grit 240, 2 x Grit 320
Art.-No.: 5132002596 EAN Code: 4892210120847
Art.-No.: 5132002608 EAN Code: 4892210121257
PB82A2
PB50A2
RAK03SR
2 Piece 82mm Planer Blade Set
3 Piece 50mm Planer Blade Set
3 Piece Saw Rail
Contains
Contains
Contains
●●
2 x 82mm (length) Planer Blade
Art.-No.: 5132002597 EAN Code: 4892210120861
●●
3 x 50 Replacement Planer Blades Fits: CPL180M / CPL180MHG
Art.-No.: 5132002602 EAN Code: 4892210120878
●●
3 x Guide Rail Assembly ~408mm (length)
●●
2 x Clamp Assembly
Art.-No.: 5132002674 EAN Code: 4892210125071
For further Ryobi® product information, please go online to www.ryobitools.co.uk
PT 2014_UK-version 5.8.indd 47
05.08.14 16:31
48 | ACCESSORY SETS
Blades Model No.
Description
SB254T48A1 254mm 48 tooth TCT Mitre Saw Blade SB254T24A1 254mm 24 tooth TCT Mitre Saw Blade SB216T48A1 216mm 48 tooth TCT Mitre Saw Blade SB216T24A1 216mm 24 tooth TCT Mitre Saw Blade CSB150A1 150mm circular saw blade (18-tooth, 10mm bore) CBS170A1 170mm circular saw blade (12-tooth, 20mm bore) CSB190A1 190mm circular saw blade (18-tooth, 16mm bore) TSBA1 4Ë? (102mm) tile saw blade PB82A2 2 pack 82mm planer blades PB50A2 2 pack 50mm planer blades RAK-0001PB 2 pack 50mm planer blades
Fits Models EMS254L / ETMS1825HG / ETS1825HG / ETS1525SCHG / ETS1526ALHG / ETS1526HG EMS254L / ETMS1825HG / ETS1825HG / ETS1525SCHG / ETS1526ALHG / ETS1526HG EMS216L EMS216L LCS180 / RWSL1801 EWS1150RS EWS1266HG / RWS1250 / RWS1400 / RWS1600 LTS180M EPN7582NHG / EPN6082CHG CPL180MHG CPL180MHG
Tool Bags Model No.
Dimensions
Description
UTB2 UTB4
Size: 355 x 203 x 279mm Size: 460 x 305 x 305mm
ONE+ Canvas Tool Bag Medium Heavy Duty Contractors Tool Bag
Sanding Accessories Model No.
Description
Fits Models
ASP00102 SMS30A SPS20A
10 x assorted sanding sheets 30 piece multi sand sheets 20 piece palm sand sheets
CCC180M EMS180RV EPS80RS
PT 2014_UK-version 5.8.indd 48
05.08.14 16:31
INDEX | 49
Index Contents / Key New from Ryobi® 18V ONE+™ Battery Technology
3 4 – 5 / 14 6 – 7
Cordless Power Tools
8 – 31
ONE+™ 18V Tools
9 – 19
12V Tools
26 – 27
RCD12011L
12V Drill Driver
26
RMT12011L
12V Multi tool
27
R12PS-L13S
12V Palm Sander
27
RRS12011L
12V Multi Purpose Saw
27
4V Tools
28 – 29
CSD4107BG
4V Lithium-Ion Screwdriver
29
CSD4130GN
4V Lithium-Ion screwdriver
29
LLCDI18022
18V 2-Speed Hammer Drill/Driver
10
RCD18021L
18V 2-Speed Drill/Driver
10
RCD1802M
18V 2-Speed Drill/Driver
10
LCDI1802M
18V 2-Speed Hammer Drill/Driver
10
CDC1802M
18V 2-Speed Drill/Driver
11
CRH1801M
18V SDS+ Hammer Drill
11
RAD1801M
18V Right Angle Drill
11
RID1801M
18V Impact Driver
12
RPD1200-K
1200W Percussion Drill
33
BIW180M
18V Impact Wrench
12
RPD800-K
800W Percussion Drill
33
RMT1801M
18V Multi Tool
12
RPD500-G
500W Percussion Drill
33
RWSL1801M
18V Circular Saw
13
ERH710RS
710W SDS-Plus Rotary Hammer Drill
34
RRS1801M
18V Reciprocating Saw
13
EAG2000RS
Large Angle Grinder
34
R18JS-0
18V Jigsaw
13
EAG750RS
Small Angle Grinder
34
R18N18G-0
18V Gauge Nailer
15
EAG600RS
Small Angle Grinder
35
R18N16G-0
18V Gauge Nailer
15
RJS1050-K
680W Jigsaw
35
R18AG-0
18V Angle Grinder
15
RJS750-G
500W Jigsaw
35
EMS190DCL
18V Mitre Saw
16
ERS80VHG
Reciprocating Saw
36
R18I-0
18V Inflator
16
RWS1250-G
66mm Circular Saw
36
LTS180M
18V Tile Saw
16
EWS1150RS
55mm Circular Saw
36
CPL180M
18V Planer
17
RMT200-S
200W Multi Tool
37
CRO180M
18V 125mm Random Orbit Sander
17
ROS300
Random Orbit Sander
37
CCC1801M
18V Corner Sander
17
EMS180RV
Multi Pad Sander
37
CCG1801M
18V Caulking Gun
18
EPS80RS
Palm Sander
38
CHV182M
18V Hand Vac
18
ESS280RV
1
⁄3 Sheet Sander
38
CDR180M
18V MP3 Compatible Radio
18
ESS200RS
1
⁄3 Sheet Sander
38
RFL180M
18V Flashlight
19
EOS2410NHG
1
⁄4 Sheet Palm Sander
39
P620
18V Speed Sprayer
19
EBS800V
76mm (3˝) Belt Sander
39
EPN7582NHG
750W Planer
39
ERT1400RV
6.35mm (1⁄4˝) 1400W Router
40 40
ONE+™ 18V Cordless Lawn & Garden Tools
20 – 25
Battery & Charger Summary
30 – 31
Corded Power Tools
32 – 42
EHG2000
Heat Gun
RLM18X40H240 18V Lithium Fusion™ Lawnmower
21
EMS254L
254mm (10˝) Compact Slide Mitre Saw with Laser
40
RLT1830H13
18V Hybrid Line Trimmer
22
EMS216L
216mm (71⁄5˝) Compact Slide Mitre Saw with Laser
41
RLT1825Li
18V Line Trimmer
22
RTS1800EF-G
1800W Table Saw
41
OLT1831S
18V Line Trimmer
23
RWB02
Adjustable Folding Work Bench
42
RHT1851R15
18V Hedge Trimmer
23
RWB03
Adjustable Metal Folding Work Bench
42
OHT1855R
18V Hedge Trimmer
24
OHT1850X
18V Long Reach Hedge Cutter
24
OPP1820
18V Pole Saw
25
OBL1802
18V Blower
25
PT 2014_UK-version 5.8.indd 49
Accessories
43 – 48
05.08.14 16:31
50 | NOTES
PT 2014_UK-version 5.8.indd 50
05.08.14 16:31
NOTES | 51
PT 2014_UK-version 5.8.indd 51
05.08.14 16:31
NEW
ryobitoolsuk
Ryobi Technologies (UK) Limited 1st Floor Unit 3 Globeside Business Park, Fieldhouse Lane, Marlow, Bucks, SL71HZ Tel: +44 (0) 1628 894 400 Fax: +44 (0) 1628 894 401 Email: Sales@tti-uk.com Web: www.ryobitools.co.uk Technical helpline: +44 (0) 800 389 0305 For your nearest local service centre please contact customer services on: +44 (0) 1628 894 400
PT 2014_UK-version 5.8.indd 52
Dealer stamp:
Content of the catalogue is correct at time of going to print. Ryobi reserve the right to change images and prices without prior notice. The use of the trademark RYOBI® is pursuant to a license granted by Ryobi Limited. 5139000539
05.08.14 16:31