Product range guide by S.P.Securiton Alarm Systems Ltd

Product Range Guide

ESPintelligent

Analogue Addressable Fire Detection

u Sensors 4 u Beams 5 u Bases 5, 6 u Audio/Visual 6, 7 u Modules 7, 8 9 u Call Points 9, 10

MARINE

Approved Analogue Addressable & Conventional Products

u Interfaces 32 u Cables 32

FIREwave

Hybrid Wireless Detection

u FIREwave Translator & Expander 33 u FIREwave Modules 34 u FIREwave Sensors 35 u FIREwave Audio/Visual 35, 36

u Detectors 11 u Sensors 11, 12 u Bases 12, 13 u Modules 13, 14 u Call Points 14

FIRElink

CDXconventional

ANCILLARY

u Detectors 16, 17 u Beam Detectors 18 u Bases 18, 19 u Audio & Visual 19, 20, 21 u Call Points 21, 22

u Ancillaries 39, 40 u Test Equipment 40, 41 u Power Supplies 42 u Enclosures 42

Conventional Fire Detection

CDX

Intrinsically Safe & Explosion Proof

u Detectors 23, 25 u Bases 23 u Call Points 23 u Modules 24

SILapproved

u Sensors 26, 27 u Detectors 27 u Bases 28 u Audio & Visual 28 u Modules 29, 30 u Call Points 30

LINEAR HEAT Detection

Air Sampling System

u FIRElink Detectors u FIRElink Accessories

37, 38 38

Equipment

BEACON VARIANTS Guides to our EN54-23 A/V Range

u Sounder Beacons 45 u Conventional Beacons 46 u Ceiling Beacons 47 u Wall Beacons 48

INDEX

World Class Leaders in Fire Detection Since 1918 International Market Leader Hochiki has a distinguished heritage of specialist technological expertise which has gained the group its international status as one of the world’s leading manufacturers of commercial and industrial fire detection solutions. Established early in the twentieth century, Hochiki has remained an independent, multi-national company which now employs over 1500 personnel in total, operating five manufacturing plants, thirty-one sales offices and eighteen subsidiaries. Hochiki Europe (UK) Ltd manufactures and distributes product for Europe, the Middle East, CIS, Indian SubContinent and Africa and is dedicated to providing sales and technical services to these markets. World Proven Performance With a heritage of innovative design and leading edge technologies, Hochiki’s products have gained widespread acceptance as the benchmark for highintegrity and long-term reliability throughout the world. Research and Development for Life Safety Hochiki owns the world’s largest, purpose-built, state of the art fire test laboratory. This ensures that the pedigree of Hochiki products remains unrivalled and guarantees that even large scale designs are fully proven in real fire conditions. In addition, the Group employs over 100 specialist research and development engineers that undertake activities from fundamental research into the physical properties of fire, to hardware and software product design and development.

Delivery Quality Acknowledged globally by system specifiers and integrators as an international market leader in the manufacture of fire products, the main benefits of using Hochiki products are: u High quality of products ensure long term reliability u Easy to install u Open Protocol for choice and flexibility u Reduced cost of ownership u Virtual elimination of false alarms u Compliance to standards Types of Fire Detection System Hochiki offers two types of fire detection system; the ESP intelligent analogue addressable fire alarm system and the CDX conventional system, as well as a range of ancillary and test equipment. Product Colour Key Some products are available in a range of colours, and where appropriate, a colour swatch is shown next to these products denoting which colours are available. For example denotes product available in ivory. Ivory

White

Black

Grey

Red

Blue

Green

Yellow

ESPintelligent ANALOGUE ADDRESSABLE FIRE DETECTION

Hochiki’s comprehensive ESP intelligent (Analogue Addressable range is suitable for even the most demanding and incorporates high performance sensors, a wide selection of input and output modules and ancillaries. All products use Hochiki’s high integrity digital communications link ‘ESP’ (Enhanced Systems Protocol) that’s at the heart of the ESP range.

ALN-EN

A Photoelectric Smoke Sensor

incorporating Hochiki’s unique High Performance Chamber which allows the sensor threshold level to be increased, thereby improving the signal to noise ratio and reducing susceptibility to false alarms.

 Removable, High Performance Chamber  Twin fire LEDs allow 360° viewing  Locking mechanism (sensor to base)  Variable sensitivity  Electronically addressed  Pulsing/non-pulsing controlled from panel*  Addressed via TCH-B200 Hand Held Programmer  Approved by LPCB, VdS & to SIL2

 Continually corrects itself against building movement An Analogue Addressable  Controlled and adjusted from Reflective Beam Smoke Detector ground level utilising included designed to protect large open controller spaces, features separate detector  5-40m standard detection range and controller. The detector unit  Extension kits available to enhance incorporates a motorised head that detection range up to 100m can align itself during commissioning.  Fully compatible with the Hochiki Additional reflector kits enhance ESP analogue addressable protocol detection range.  Addressed via TCH-B200 Hand Held Programmer & PL-3  Approved by VdS

TCH-B200

A Hand Held Address Programmer designed to address

the ESP range of Sensors and other addressable devices such as the YBO-BS Base Sounder. Designed to be light, robust and easy to use it operates from a single PP3 size battery which can provide up to 8000 operations.

YBN-R/3

ATJ-EN

YBN-R/3(SCI)

A Multi Sensor incorporating

A Multi-Heat Sensor incorporating

a variable Fixed Temperature heat element and Rate Of Rise heat element, both controlled from the Control Panel allowing either thermal element or both elements simultaneously to be active in making the fire decision.

ACB-EW

 User selectable modes  Incorporates Fixed Temperature and Rate Of Rise Heat elements  Twin fire LEDs allow 360° viewing  Pulsing/non-pulsing controlled from panel*  Electronically addressed  Addressed via TCH-B200 Hand Held Programmer  LPCB & VdS approved to Classes A, B&C  Approved to SIL2

  An IP67 Rated Waterproof Multi-Heat Sensor which can be  used externally and is supplied with  its own fixing base which is used to fix the sensor. Flying leads from the  sensor connect directly to the loop via  waterproof connectors.   

User selectable modes Incorporates Fixed Temperature and Rate Of Rise Heat elements Twin fire LEDs allow 360° viewing Pulsing/non-pulsing controlled from panel* Electronically addressed IP67 rated Supplied with fixing base Addressed via TCH-B200 Hand Held Programmer & PL-2 LPCB & VdS approved to Classes A, B&C

*Please ensure control panel compatibility

   

Lightweight design Quick and reliable addressing Up to 8000 address settings from one battery Displays sensor analogue value

(shown with sensor fitted - not supplied)

 User selectable modes  Incorporates Optical & Heat elements a thermal element and a High  Removable, High Performance Performance photoelectric smoke Chamber chamber. Has three modes controlled  Twin fire LEDs allow 360° viewing from the Control Panel, allowing either  Pulsing/non-pulsing controlled the optical or thermal element or from panel* both to be active in making the fire  Variable sensitivity decision.  Electronically addressed  Addressed via TCH-B200 Hand Held Programmer  Approved by LPCB, VdS & to SIL2

ACC-EN

FB-1

A Common Mounting Base which

is fully compatible with Hochiki’s ESP range of sensors. Supplied with square cable clamps for secure and reliable cable termination and is also capable of driving a remote LED if required.

(Red version - YBO-R/3(RED) for use with CHQ-WS2 Wall Sounder, CHQ-WB Wall Beacon & CHQ-WSB Wall Sounder Beacon)

 Electronics free  Stainless steel contacts  Takes 2.5mm2 cables  Slim profile - only 8mm  Rugged wiring contacts  Facility for remote indicator  Quick Connection via square cable clamps  Available in RED for use with CHQ-WS2 Wall Sounder & CHQ-WSB Wall Sounder Beacon

 Features integral SCI  Easy to fit A sensor mounting base featuring  Slim profile an integral short-circuit isolator which  Matches standard base colours will detect and isolate short-circuits  Compatible with the ESP range of on the loop. When a short-circuit is sensors detected during power up the unit will  Approved to SIL2 drop the power to the rest of the loop.

YBN-R/3(SCI)-OEM

An adaptor featuring an integral short-circuit isolator, which has been designed to be fitted to a standard sensor mounting base (YBN-R/3) to convert it into a short-circuit isolator base. This combined unit will then detect and isolate short-circuits on the loop. When a short-circuit is detected the combined unit will drop the power to the rest of the loop.

     

Converts standard mounting base to SCI base Easy to fit Ultra-slim profile Matches standard base colours Also available in white Sold in a boxed quantity of 10pcs

CHQ-WS2

 Loop Powered  Single Loop Address - addressed via the TCH-B200 Hand Held Programmer levels and 51 tones with a maximum  Variable Sound Output 90 ~ 102 output of up to 102 dB(A) (±2 dB(A)) dB(A) (±2 dB(A)) output at 1 metre with low current consumption. Special  Weatherproof Kit available (see bases available: YBO-R/3(RED), below) YBO-R/SCI(RED), YBO-R/3(WHT) and  51 User-Selectable Tones (all tones YBO-R/SCI(WHT-SNDR). EN54-3 compatible)  Auto-shutdown Mode available*  Approved by LPCB, VdS & to SIL2

An Addressable Loop-Powered Wall Sounder providing 8 volume

CHQ-WSB2

As per CHQ-WS2 plus:  Variable flash frequency* An Addressable Loop-Powered  High Intensity LED technology Wall Sounder Beacon as per the  Independent control of Sounder and CHQ-WS2 but additionally featuring an Beacon* integral beacon within the horn which  Auto-shutdown Mode available utilises high intensity LED technology. can be set independently for Special bases available: YBO sounder or beacon* R/3(RED), YBO-R/SCI(RED), YBO Addressed via TCH-B200 Hand Held R/3(WHT) and YBO-R/SCI(WHT-SNDR). Programmer  Approved to EN54-23: 2010 - *For product variant types see page 45 Category ‘O’

CHQ-CB

 High Intensity LED technology  0.5/1 Hz flash frequency

LED and a custom designed free-form optic which produce a highly visible flash. Variants available in 5m, 7.5m, 10m and 15m diameter.

white)  Approved to EN54-23: 2010 - Category ‘C’  High efficiency  Selectable light output*  Operating Voltage 17-41 vdc

An Addressable Loop-Powered  Addressable via TCH-B200 Ceiling Beacon with a high-intensity  Choice of 2 LED colours (red and

*For product variant types see page 47

CHQ-WB

 High Intensity LED technology  0.5/1 Hz flash frequency An Addressable Loop-Powered  Addressable via TCH-B200 Wall Beacon with a high intensity  Choice of 2 LED colours (red and LED and a custom designed free-form white) optic which produces a highly visible  Approved to EN54-23: 2010 - flash. The unit is designed to fit the Category ‘W’ YBN-R/3, YBN-R/3(SCI), YBO-BS or the  High efficiency YBO-R/(SCI), and is available in Red or  Selectable light output* White LEDs.  Operating Voltage 17-41 vdc *For product variant types see page 48

*Please ensure control panel compatibility

CHQ-WPK

A Weatherproof Back Box and

  

YBO-BS

 Loop Powered  Single Loop Address - addressed automatically by Control Panel or via the TCH-B200 Hand Held Programmer  50 ~ 98 dB(A) (±2 dB(A)) output at 1m  Fits Hochiki Standard or Isolator Base and supports ESP Sensors, Beacons and Remote Indicator  51 User-Selectable Tones (all tones EN54-3 compatible)  Approved by LPCB, VdS & to SIL2

gasket set for the CHQ-WS2 Wall Sounder, CHQ-CB Ceiling Beacon, CHQ-WB Wall Beacon and CHQ-WSB Wall Sounder Beacon, increases the IP Rating of the Sounder to IP65 for external use.

An Addressable Loop-Powered Base Sounder providing 13 volume

levels and 51 tones with a maximum output of up to 98 dB(A) (±2 dB(A)) with low current consumption. The unit is designed to fit either the YBN-R/3 or the YBO-R/SCI Bases.

YBO-BSB2

An Addressable Loop-Powered Base Sounder Beacon providing

13 volume levels and 51 tones with a maximum output of up to 98 dB(A) (±2 dB(A)) with low current consumption. The unit is designed to fit either the YBN-R/3 or the YBO-R/ SCI Bases. Cap available (SI/CAP2). *For product variant types see page 45

      

Designed for CHQ-WS2, CHQ- WSB, CHQ-CB, CHQ-WB Increases sounder IP Rating from IP21 to IP65 (external use) Easy to install

Loop Powered Single Loop Address, addressed by either Control Panel or TCH-B200 50 ~ 98 dB(A) (±2 dB(A)) output at 1m Fits Hochiki Standard or Isolator Base and supports ESP Sensors, Beacons and Remote Indicator 51 User-Selectable Tones (all tones EN54-3 compatible) Beacon and Sounder can be controlled independently* Approved to EN54-23: 2010 - Category ‘O’

*Please ensure control panel compatibility

CHQ-ARI

  An Addressable Loop-Powered  Remote Indicator, with high intensity LEDs and a Fresnel lens  design which produces a highly visible  signal. The casing exactly matches the Hochiki ESP Sensor range in shape and colour providing seamless integration.

CHQ-AB

An Addressable Loop-Powered Visual Indicator with high-intensity

LEDs and Fresnel lens design which produces a highly visible flash. The casing exactly matches the Hochiki ESP Sensor range in shape and colour providing seamless integration.

High Intensity LED technology Addressable via TCH-B200 Up to 127 devices per loop Approved by VdS Non EN54-23 Compliant Remote indicator

 High Intensity LED technology  1 Hz flash frequency  Addressable via TCH-B200  Up to 127 devices per loop  Choice of 3 lens colours (red, amber and blue)  Approved by VdS (red and amber lens)  Non EN54-23 Compliant  Supplementary indicator

CHQ-POM

 Supplies a nominal 24 Vdc at various current levels, 2 mA to 32 mA in increments of 2 mA designed to supply a nominal 24 Vdc  User-selectable current output at various, user-selectable current  Includes two monitored inputs levels from 2 to 32 mA (in increments  Small design, provides simple of 2 mA). The unit is small enough to connectivity to ESP loop for third- be added to other third-party devices party devices, such as IFD-E thereby allowing a range of equipment  Colour-coded flying leads for simple to be added to the ESP loop. The unit installation also features two monitored inputs.  Addressed with TCH-B200 Hand Held Programmer & PL-3  Approved by LPCB & VdS

A Powered Output Module

CHQ-SIM

Transparent Black

Opaque White

Lid Colours

CHQ-SZM2(SCI)

 Loop powered  Up to 6 Conventional Detectors

allow up to 6 conventional detectors or 1 SPC-ET/SRA-ET beam detectors to be interfaced to Hochiki’s ESP analogue addressable system. Also available as a DIN Rail mountable version. Both models feature an integral short-circuit isolator.

     

CHQ-MRC2

 Loop-powered  Single loop address

a single mains rated relay output for the control of such devices as dampers, extractors or plant and equipment shutdown. The monitored input can be used for local power supply fault monitoring or as a general-purpose input. Also available as a DIN Rail mountable version. Both models feature an integral shortcircuit isolator.

     

Single mains rated relay contact Relay contact rated at 250 Vac @ 5A (resistive) & 48 Vdc @ 2A (resistive) Auxiliary monitored input DIN rail version available Both models feature an integral short-circuit isolator Both models approved by LPCB

HCP-E(SCI)

       

Fast response Integral short-circuit isolator Bi-colour status LED Non-frangible element fitted as standard (conforms to EN54) Addressed with TCH-B200 Hand Held Programmer & PL-3 Surface or flush mounting LPCB Approved to EN54 Approved to SIL2

Includes a single monitored output Small design for simple provision of a monitored input onto an ESP loop Flying leads for easy installation Addressed with TCH-B200 Hand Held Programmer & PL-3 Approved by LPCB

CHQ-DIM2(SCI)

       

Loop powered Single loop address DIL switch addressable Two independent inputs for monitoring of volt-free contacts Each input can be configured to monitor either Normally Open or Normally Closed contacts DIN rail version available Both models feature an integral short-circuit isolator Both models approved by LPCB & VdS

A Dual Input Module designed to

interface to a variety of inputs such as door contacts, sprinkler flow/door switches and plant equipment. Also available as a DIN Rail mountable version. Both models feature an integral short-circuit isolator.

CHQ-DRC2(SCI)

A Dual Relay Controller designed

Lid Colours

Single loop address Loop powered DIL switch addressable 4 change-over relay outputs 4 independent inputs for monitoring of volt-free contacts Each input can be configured to monitor either Normally Open or Normally Closed contacts DIN Rail version available Both models feature an integral short-circuit isolator Both models approved by LPCB

    

 Loop powered  Single loop address  DIL switch addressable Transparent Black to provide two general-purpose relay  Two independently controlled outputs, each output can be controlled changeover relays Opaque independently and used to control White  Relays contact rated at 30 Vdc at 1 A dampers, plant and equipment  Auxiliary monitored input shutdown. The monitored input can  DIN rail version available be used for local power supply fault  Both models feature an integral monitoring or as a general-purpose short-circuit isolator input. Also available as a DIN Rail  Both models approved by LPCB mountable version. Both models & VdS feature an integral short-circuit *Please ensure control panel compatibility isolator. Lid Colours

CHQ-PCM(SCI)

CHQ-SOM

A Single Output Module designed to allow a single relay output to be connected to the ESP loop. The unit incorporates a volt-free relay contact that can be configured as either N/O or N/C, the relay contact is rated to 30 V dc (max), 1 A (resistive load). The CHQ-SOM features three colour-coded flying leads, the unit also features a wiring terminal block for loop connection.

Opaque White

Lid Colours

  Transparent Black allow up to 60 conventional detectors  (30 per zone) or up to 6 SPC-ET or SRA-  Opaque ETs (3 per zone) to be interfaced to White Hochiki’s ESP analogue addressable  system. The unit also features  Schottky and Zener line continuity  options. Also available as a DIN Rail mountable version. Both models  feature an integral short-circuit isolator.

to allow a single monitored input to be connected to the ESP loop. This provides a compact, low-cost option where the installation of the larger CHQ ‘Smart-Fix’ Range of Modules might be difficult.

Transparent Black

Single loop address Supports two independent zones of conventional detectors DIL switch addressable Both zones fully monitored for Short/Open Circuit Requires an auxiliary 24 Vdc supply DIN rail version available Both models feature an integral short-circuit isolator Both models approved by LPCB

A Single Input Module designed

Lid Colours

CHQ-DZM(SCI)

Lid Colours

    

CHQ-DSC2(SCI)

A Dual Sounder Controller which

has been designed to provide two sounder outputs (that can be driven separately) with full fault monitoring. The monitored input can be used for local power supply fault monitoring or as a general-purpose input. Also available as a DIN Rail mountable version. Both models feature an integral short-circuit isolator.

          

Single loop address Two independent sounder circuits DIL switch addressable Each circuit fully monitored for Open and Short Circuit faults Each alarm circuit fused at 1 A Auxiliary monitored Input Outputs are synchronised and can be driven continuously or intermittently 24 Vdc auxiliary power required DIN rail version available Both models feature an integral short-circuit isolator Both models approved by LPCB & VdS

A Dual Zone Module designed to

  A Plant Control Module with  Transparent Black four independent change-over relay  outputs, with N/O and N/C volt free  Opaque contacts and four inputs. These White outputs can be driven separately by  the fire alarm control panel and can be used for the control of devices such as dampers or for plant and equipment  shutdown. Also available as a DIN  Rail mountable version. Both models feature an integral short-circuit  isolator.

Transparent Black

Opaque White

A Single Zone Monitor designed to  DIL switch addressable

Single loop address Remote LED output Fully monitored for Short and Open Circuit faults DIN rail version available Both models feature an integral short-circuit isolator Both models approved by LPCB & VdS

A Mains Relay Controller providing  DIL switch addressable

A Manual Call Point Isolator

fully compatible with Hochiki’s ESP analogue addressable protocol and featuring an integral short-circuit isolator (SCI). Features a bi-coloured LED to indicate either fire (red) or short-circuit (amber). Also features plug-in wiring terminals for easy installation.

Note - requires SR MOUNTING BOX if surface mounted (sold separately) (see page 10)

HCP-W(SCI)

Fast response Integral short-circuit isolator Bi-colour status LED Non-frangible element fitted as standard (conforms to EN54) Addressed with TCH-B200 Hand Held Programmer & PL-3 Surface mounting LPCB Approved to EN54 IP67 rated Approved to SIL2

with Hochiki’s ESP analogue addressable protocol and featuring an integral short-circuit isolator (SCI). Features a bi-coloured LED to indicate either fire (red) or short-circuit (amber). Also features plug-in wiring terminals for easy installation.

        

SR BACKBOX

 Allows addressable call point HCP-E to be surface mounted

An IP67 Weatherproof Manual Call Point Isolator fully compatible

Call Point Surface Mounting Box. Red Back Box for HCP-E

PS200

Hinged cover for Call Point.

An acylic hinged cover for the HCPE(SCI) manual call point range which protects against accidental operation/ vandalism.

 Easy to install  Protects against accidental activation

MARINE

APPROVED ANALOGUE ADDRESSABLE & CONVENTIONAL PRODUCTS Hochiki’s Marine Approved Analogue Addressable range of products has been designed around the existing world-proven ESP range and all products utilise the Hochiki ESP Protocol. Hochiki’s Marine Approved Conventional range of products has been designed around the existing world-proven CDX range. All products have been approved for marine use by either Lloyds Register or Germanischer Lloyd and are ideal for use on ships, oil rigs etc.

SLR-E3NM

 Removable, High Performance chamber

which is fully compatible with the majority of existing Marine Conventional systems and incorporates a remote indicator output.

    

SLR-E-IS

 Removable, High Performance chamber

in hazardous areas. Incorporates a remote indicator output and a removable chamber for easy maintenance.

   

Remote indicator output ATEX certification to: II 1G EEx ia IIC T5 ( Tamb=55°C) Suitable for installation in areas at Category 1 (inc all lower categories) Approved by LPCB, GL and to IECEx

DCD-1E-IS

     

Twin fire LEDs allow 360° viewing Electronics free mounting base Remote indicator output ATEX certification to: II 1G EEx ia IIC T5 (Tamb=55°C) Suitable for installation in areas at Category 1 (inc all lower categories) Approved by LPCB, GL and to IECEx

 A Conventional Flame Detector  designed for internal use to detect  large flames. The detector fits any of  the CDX range of mounting bases. The  detection zone is a 90° cone and the  detection range is up to and including 25m.   

Class 1 performance as defined in BS EN54-10:2002 (range up to 25m) Single IR technology Robust and slim design Low current consumption Easy to install Fits any of the CDX Range of mounting bases Twin LEDs for 360° view Approved by LPCB & VdS Approved to MED by GL

A Marine Approved Conventional  Remote indicator output Photoelectric Smoke Detector  Wide voltage range (9.5 ~ 30 Vdc)

A Conventional I.S. Photoelectric  Twin fire LEDs allow 360° viewing Smoke Detector designed for use  Supported by a range of barriers

A Conventional I.S. Rate of Rise Heat Detector designed for use

in hazardous areas. Incorporates a remote indicator output and a 60°C fixed temperature element.

DRD-EM

Low profile design with one piece outer cover Twin fire LEDs allow 360° viewing One master base Approved by LPCB Approved to MED by GL

DCD-AE3M

A Marine Approved Conventional Rate of Rise Heat Detector incorporating a 60°C fixed temperature element. The thermistor and linearising circuit provide an accurate linear response Heat Detector. A third terminal provides integral remote indicator output.

DCD-CE3M

A Marine Approved Conventional Rate of Rise Heat Detector incorporating a 90°C fixed temperature element. The thermistor and linearising circuit provide an accurate linear response Heat Detector. A third terminal provides integral remote indicator output.

ALN-ENM

A Photoelectric Smoke Sensor

ATJ-ENM

A Multi-Heat Sensor incorporating

ACC-ENM

YBN-R/3M

      

Electronic linear heat detection Remote indicator output Wide voltage range (9.5 ~ 30 Vdc) Twin fire LEDs allow 360° viewing Approved by LPCB Approved to MED by GL GL Type approval

 Electronics free  Supports ESP Marine Approved Sensors  Takes 2.5mm2 cables compatible with Hochiki’s ESP  Slim profile - only 8mm Range of Marine Approved Sensors.  Facility for remote indicator Supplied with square cable clamps for  Quick Connection via square cable secure and reliable cable termination clamps and is also capable of driving a remote  Approved to MED by GL LED if required.  GL Type approval  Approved by GL

      

Electronic linear heat detection Remote indicator output Wide voltage range (9.5 ~ 30 Vdc) Twin fire LEDs allow 360° viewing Approved by LPCB Approved to MED by GL GL Type approval

YBO-R/SCIM

A Marine Approved Common Mounting Base which is fully

A Marine Approved ShortCircuit Isolator Base which is fully

compatible with Hochiki’s ESP Marine Approved analogue addressable protocols and Sensors. It can be used instead of a standard base, which reduces the cost of the Short Circuit Isolators and improves the funcionality.

YBN-R/6M

 Integral remote indicator output  Low profile, only 8mm

the CDX Marine Approved Range of Detectors and fully compatible with the majority of existing conventional fire alarm control panels.

 Quick connections via square cable clamps  Accepts 2.5mm2 cables  Bayonet slot, low insertion force for detectors  Approved to MED by GL

YBN-R/4(IS)

 Low Profile, only 8mm  Rugged design  Dedicated cable screen terminal  Accepts from 1 to 2.5mm2 cables  Quick connection via square cable clamps  Electronics free  GL Type approval

A Marine Approved Conventional  Rugged design Detector Mounting Base for  Electronics free

 User selectable modes  Incorporates Fixed Temperature and Rate Of Rise Heat elements  Twin fire LEDs allow 360° viewing  Pulsing/non-pulsing controlled from panel*  Addressed via TCH-B200 Hand Held Programmer  LPCB & VdS approved to Classes A, B&C  Approved to MED by GL  GL Type approval

 User selectable modes  Incorporates Optical & Heat A Multi Sensor incorporating elements a thermal element and a High  Removable, High Performance Performance photoelectric smoke Chamber chamber. Has three modes controlled  Twin fire LEDs allow 360° viewing from the Control Panel, allowing either  Pulsing/non-pulsing controlled the optical or thermal element or from panel* both to be active in making the fire  Variable sensitivity decision.  Addressed via TCH-B200 Hand Held Programmer  Approved to MED by GL  GL Type approval

 Detects short circuits on loop  Status LED  Connection of up to 127 per loop  Supports ESP Marine Approved Sensors  Quick connection via square cable clamps  Approved to MED by GL  GL Type approval  Approved by LPCB

A Conventional Detector Mounting Base associated with

the CDX Range of Intrinsically Safe Detectors and is fully compatible with the majority of existing conventional fire alarm control panels.

Lid Colours

Transparent Black

Opaque White

CHQ-DRC2/M(SCI) A Marine Approved Analogue Addressable Dual Relay Controller designed to provide

two general-purpose relay outputs, each output can be controlled independently and used to control dampers, plant and equipment shutdown. The monitored input can be used for local power supply fault monitoring or as a general-purpose input. Features an integral shortcircuit isolator.

 Loop powered  Single loop address  Two independently controlled changeover relays  Relays contact rated at 30 Vdc at 1A  Auxiliary monitored input  Feature an integral short-circuit isolator  Approved to MED by GL  GL Type approval  Approved by LPCB

CHQ-DIM2/M(SCI)

 Loop powered  Single loop address A Marine Approved Analogue  Two independent inputs for Transparent Black Addressable Dual Input Module monitoring of volt-free contacts designed to interface to a variety  Each input can be configured to Opaque White of inputs such as door contacts, monitor either Normally Open or sprinkler flow/door switches and Normally Closed contacts plant equipment. Features an integral  Features an integral short-circuit short-circuit isolator. isolator  Approved to MED by GL  GL Type approval  Approved by LPCB Lid Colours

CHQ-DSC2/M(SCI)

 Single loop address  Two independent sounder circuits  Each circuit fully monitored for Open Transparent Black and Short Circuit faults  Auxiliary monitored Input Opaque White  Outputs are synchronised and can be to provide two sounder outputs (that driven continuously or intermittently can be driven separately) with full fault monitoring. The monitored input  24 Vdc auxiliary power required  Features an integral short-circuit can be used for local power supply isolator fault monitoring or as a general Approved to MED by GL purpose input. Features an integral  GL Type approval short-circuit isolator.  Approved by LPCB Lid Colours

A Marine Approved Analogue Addressable Dual Sounder Controller which has been designed

CHQ-SZM2/M(SCI)

 Loop powered  Up to 6 Conventional Detectors A Marine Approved Analogue  Single loop address Transparent Black Addressable Single Zone Monitor  Remote LED output designed to allow up to 6 marine  Fully monitored for Short and Open Opaque White approved conventional detectors to be Circuit faults interfaced to Hochiki’s ESP analogue  Features an integral short-circuit addressable system. Features an isolator integral short-circuit isolator.  Approved to MED by GL  GL Type approval  Approved by LPCB Lid Colours

MCP1A

 Approved to EN54-11:2001  Terminals can accommodate up to a

based upon the industry standard KAC world series housing. The unit can support either a ‘Frangible Glass’ element or a ‘Non Frangible Plastic’ element. It is also supplied complete with SR-BACKBOX for surface mounting.

 Other colours available on request  GL and MED Type approval  Approved by LPCB

HCP-W/M(SCI)

An IP67 Weatherproof Manual Call Point Isolator fully compatible

HCP-E/M(SCI)

A Marine Approved Analogue Addressable Manual Call Point

fully compatible with Hochiki’s ESP analogue addressable protocol and featuring plug-in wiring terminals for easy installation. Note - requires SR MOUNTING BOX if surface mounted (sold separately) (see page 10)

        

Fast response Integral short-circuit isolator Bi-colour status LED Non-frangible element fitted as standard (conforms to EN54) Addressed with TCH-B200 Hand Held Programmer & PL-3 Surface mounting LPCB Approved to EN54 GL and MED Type approval IP67 rated

        

Fast response Status LED Non-frangible element fitted as standard (conforms to EN54) Addressed with TCH-B200 Hand Held Programmer Surface or flush mounting Weatherproof IP67 version available (HCP-WM) Approved to MED by GL GL Type approval Approved by LPCB

MBB-2

 4 Glanded cable entry holes (glands not supplied)  Colour matched splash proof and secure fixing for the  Approved Sensor and Base range Hochiki ESP and CDX Marine Approved  Provides moisture and dust Range of Sensors and Detectors and resistant fixing their associated Bases. Provides an  Ideal for bulk-head fixing aesthetically pleasing solution where  Approved to MED by GL surface fixed devices are required.  GL Type approval The housing supports four 20mm  Non-marine use version available glanded entries for cabling access. (SBB-2)

A Marine Back Box providing a

A Conventional Manual Call Point 2.5mm2 solid conductor

Note - Yellow version not GN54 compliant

WCP1A

An IP67 Conventional Weatherproof Call Point which can

be used externally.

 Approved to EN54-11:2001  Supplied with back-box as standard  Terminals can accommodate up to a 2.5mm2 solid conductor  Other colours available on request  Ingress Protection rated to IP67  GL and MED Type approval  Approved by LPCB

CDXconventional CONVENTIONAL FIRE DETECTION

DFJ-CE3

A Conventional 90°C Fixed Temperature Heat Detector using a thermistor and linearising circuit to provide an accurate linear response. A third terminal provides integral remote indicator output.

Hochiki’s CDX range offers one of the most extensive product portfolios available, providing solutions for most conventional fire detection applications as well as security systems, due to its wide operating voltage range (9.5~30 Vdc).

SLR-E3N

A Conventional Photoelectric Smoke Detector which is fully

compatible with the majority of existing Conventional systems. A third terminal provides an integral remote indicator output.

DCD-AE3

A Conventional Rate of Rise Heat Detector incorporating a 60°C fixed

temperature element. The thermistor and linearising circuit provide an accurate linear response Heat Detector. A third terminal provides integral remote indicator output.

DCD-CE3

A Conventional Rate of Rise Heat Detector incorporating a 90°C fixed

temperature element. The thermistor and linearising circuit provide an accurate linear response Heat Detector. A third terminal provides integral remote indicator output.

DFJ-AE3

A Conventional 60°C Fixed Temperature Heat Detector using

a thermistor and linearising circuit to provide an accurate linear response Heat Detector. A third terminal provides integral remote indicator output.

 Removable, High Performance chamber  Remote Indicator output  Wide voltage range (9.5 ~ 30 Vdc)  Low profile design with one piece outer cover  Twin fire LEDs allow 360° viewing  Range of mounting bases  Approved by LPCB & VdS

 Electronic linear heat detection  Wide voltage range - can be installed on security systems  Twin fire LEDs allow 360° viewing  Fixed Temperature Detector  Full range of mounting bases  Approved by LPCB & VdSDi issi cem intissultod publis o mereis hus inver hocres faccien tilicaetio, tum, ut oca con nonsto caequam entriti nvolis strum audemena etemus confina nos con vis. At fur, etride facchucii patid iae tum quam patu quam senteatur.

DFG-60BLKJ

 Waterproof design – rated to IP67  Low profile shape

current and high reliability. Particularly suited to environments, which are exposed to high levels of condensation or are hosed down.

 Minimal standby current  Approved by LPCB & VdS

An IP67 Waterproof Conventional  Utilises a bi-metallic strip to sense 60°C Fixed Temperature Heat temperature change  No Mounting base required Detector with minimal standby

     

Electronic linear heat detection Remote Indicator output Wide voltage range (9.5 ~ 30 Vdc) Twin fire LEDs allow 360° viewing Range of mounting bases Approved by LPCB & VdS

DRD-E

     

Electronic linear heat detection Remote Indicator output Wide voltage range (9.5 ~ 30 Vdc) Twin fire LEDs allow 360° viewing Full range of mounting bases Approved by LPCB & VdS

IFD-E

       

Class 1 sensitivity to EN54-10 detects 0.1m2 fire @ 25m Excellent optical interference immunity (solar blind) Selectable output options conventional 2-wire, 4-20mA, latching or non-latching relay contacts, fire/fault, pre-alarm Selectable response speed Optical self-test Low power consumption Approved by LPCB SIL Capable

      

Electronic linear heat detection Remote Indicator output Wide voltage range (9.5 ~ 30 Vdc) Twin fire LEDs allow 360° viewing Fixed Temperature Detector Full range of mounting bases Approved by LPCB & VdS

 

Highest immunity to false sources Suitable for indoor and outdoor areas Detects invisible flames from fuels such as Hydrogen and other inorganic fuels Selectable response speed Optical self-test Low power consumption Approved to EN54 SIL Capable

A Conventional IR3 Infra-Red Flame Detector designed to

respond to low-frequency (1 to 15Hz) flickering IR radiation emitted from flames during combustion, the unit can discriminate between flames and spurious sources of radiation such as sunlight. An I.S. version and an explosion-proof version are also available.

UV/IR2

A Conventional IR Dual Infra-Red Flame Detector has an ultra-violet  2

(UV) sensor and two infra-red (IR) sensors that respond to different wavelengths from both the ultraviolet (UV) and the infra-red (IR) spectrum. False alarms from flickering sunlight, arc welding and lightning are eliminated by a combination of ultra-violet (UV) and dual infra-red (IR) signal processing techniques.

    

16091

 Flame-free UV testing, ideal for hazardous areas

A Hand Held Flame Detector  Simple to use hand held unit with Tester providing a flame-free method rechargeable NiCd battery pack and

of UV testing the industrial IR3 series charger of flame detectors: IFD-E, IFD-E(IS) and  Tests many Flame Sensors Types UV, the IFD-E(Exd). UV/IR, UV/IR2, IR3, IR2, IR  Range typically 3m and beyond  Selectable optical output intensity THIS EQUIPMENT IS ALSO AVAILABLE with LED bar graph indication FOR HIRE. Please contact your Sales

YBO-R/6RN

A Conventional Non-Latching Relay Detector Mounting Base

associated with the CDX Range of Detectors and is fully compatible with the majority of existing conventional fire alarm and security control panels.

 Integral remote indicator output  Wide voltage range - can be used in security systems  Rugged design  Quick connections via square cable clamps  Accepts up to 2.5mm2 cables  Bayonet slot, low insertion force for detectors  Approved by LPCB

Representative for further information.

*Please ensure control panel compatibility

SPC-ET

A Conventional Beam Smoke Detector that consists of an emitter

and receiver that cover a distance of 5 - 100m providing a maximum coverage of 1500m2. Features an automatic signal strength adjustment facility and is also available with a latching or a non-latching relay.

YBN-R/6

A Conventional Detector Mounting Base associated with the

CDX Range of Detectors and Beacons and is fully compatible with the majority of existing conventional fire alarm control panels.

YBO-R/6PA

A Conventional Detector Mounting Base for 2-Wire systems

where detectors and sounders are on same zone cables*.

YBO-R/6R

A Conventional Latching Relay Detector Mounting Base

associated with the CDX Range of Detectors and is fully compatible with the majority of existing conventional fire alarm and security control panels.

 5 - 100m range  Automatic compensation  Automatic signal strength adjustment  Emitter unit can be powered direct from zone (or loop)  Features a Latching or Non-Latching Fault Relay  Can be interfaced onto ESP system via CHQ-DZM(SCI) or CHQ-SZM(SCI)  Approved by LPCB & VdS

YBO-R/6RS

 Integral remote indicator output  Low Profile, only 8mm  Rugged design and electronics free  Quick connections via square cable clamps  Accepts up to 2.5mm2 cables  Bayonet slot, low insertion force for detectors

YBN-R/6SK

 Integral remote indicator output  In-line Schottky Diode for line A Conventional Detector continuity Mounting Base with in-line Schottky  Low profile, only 8mm Diode, associated with the CDX Range  Rugged design of Detectors and is fully compatible  Quick connections via square cable with the majority of existing clamps conventional fire alarm control panels.  Accepts 2.5mm2 cables  Bayonet slot, low insertion force for detectors

 Integral remote indicator output  Rugged design  Dedicated cable screen terminal  Quick connection via square cable clamps  Accepts up to 2.5mm2 cables  Bayonet slot, low insertion force for detectors

CSB-E

   which has been designed to  complement the CDX range of  detectors. Improved electronic design enables very low current consumption  whilst providing a range of tones and volumes selectable from each unit.

Robust design Low current consumption Easy to install Maximum 93 dB(A) @ 1m (Tone 1) 32 user-selectable tones and 3 user-selectable volumes Lockable cap available (CS/CAP)

CSBB-E

Robust design Low current consumption Easy to install Maximum 93 dB(A) @ 1m (Tone 1) 32 user-selectable tones and 3 user-selectable volumes Utilises high intensity LEDs Lockable cap available (CS/CAP) Supplementary indicator Not EN54-23 compliant

 Integral remote indicator output  In-line Schottky Diode for Line A Conventional Latching Schottky Continuity Diode Relay Detector Mounting  Rugged design Base associated with the CDX Range  Quick connections via square cable clamps of Detectors and is fully compatible  Accepts up to 2.5mm2 cables with the majority of existing conventional fire alarm control panels.  Bayonet slot, low insertion force for detectors  Approved by LPCB

A Conventional Base Sounder

  A Conventional Base Sounder  Beacon which has been designed  to complement the CDX range of  detectors. Improved electronic design enables very low current consumption  whilst providing a range of tones and  volumes selectable from each unit.  Features integral beacon. 

CWSB-E

A Conventional Wall Sounder Beacon with improved electronic

design enables very low current consumption whilst providing a range of tones and volumes selectable from each unit. Features integral beacon. The unit can be used without a detector by the addition of a lockable cap (CS/CAP).

BANSHEE EXCEL

An Electronic Conventional Sounder which can be installed

internally.

 Robust design  Low current consumption  Easy to install  Maximum 113 dB(A) @ 1m (Tone 15)  32 user-selectable tones  Utilises high intensity LEDs  Supplementary indicator  Not EN54-23 compliant

     

Robust design Low current consumption Easy to install Maximum 110 dB(A) at 1m (dependent on tone selected) 32 user-selectable tones Approved by VdS

CLB-E

A Conventional Visual Indicator

for use on 24 V Sounder Circuits. The unit is fitted with a Fresnel lens and high-intensity LEDs, a design which produces a highly visible flash. The casing exactly matches the CDX Detector range in shape and colour providing seamless integration.

CWST-S5

A Conventional Beacon which

features high output LEDs, advanced optics and an innovative lens design, providing outstanding Omnidirectional light coverage at low current draw. Specifically designed for, and approved to meet EN54-23. CWST-S5 delivers quality, reliability and long operational life.

*For product variant types see page 46

BANSHEE EXCEL IP66

    An Electronic Conventional  Sounder comes with a deeper IP66 back box, which enables the unit to be  installed externally. 

Robust design Low current consumption Easy to install Deep base provides IP66 protection Maximum 110 dB(A) at 1m (dependent on tone selected) 32 user-selectable tones Approved by VdS

BANSHEE EXCEL LITE

        

Robust design Low current consumption Easy to install Xenon beacon technology Maximum 110 dB(A) at 1m (dependent on tone selected) 32 user-selectable tones Approved by VdS Supplementary indicator Not EN54-23 compliant

         

Robust design Low current consumption Easy to install Xenon beacon technology Deep base provides IP66 protection Maximum 110 dB(A) at 1m (dependent on tone selected) 32 user-selectable tones Approved by VdS Supplementary indicator Not EN54-23 compliant

CWST-W5

A Conventional Weatherproof Beacon, which features high

output LEDs, advanced optics and an innovative lens design, providing outstanding Omni-directional light coverage at low current draw. Specifically designed for, and approved to meet EN54-23. Weatherproof base provides IP65 for external use applications.

    

High Intensity LED technology Colour-matched to existing detector and base ranges Fits standard CDX base (YBN-R/6) Supplementary indicator Not EN54-23 compliant

 Approved to EN54-23, C & W categories  Advanced optics ensures superior light coverage at low current draw  Synchronised flash exceeds EN54-23 standard  Soft start feature reduces power surges during system start-up  Available in either red or white casings  Available with either a red or white LED

*For product variant types see page 46

An Electronic Conventional Sounder Beacon which can be

installed internally.

BANSHEE EXCEL LITE IP66 An Electronic Conventional Sounder Beacon comes with a

deeper IP66 back box, which enables the unit to be installed externally.

MBF-6EV

A Conventional Alarm Bell six

inches diameter and for internal use, based upon the industry standard KOBELL range.

FB/024/R/W

A Conventional Alarm Bell six

inches diameter, which has the same operation as the MBF-6EV except it comes equipped with a weatherproof back box enabling it to be used externally.

     

Low profile Low current consumption Fully suppressed and polarised 95 dB(A) at 1m (typ) Simple installation with multi-fixing base plate Approved by LPCB

 Low profile  Low current consumption  Fully suppressed and polarised  100 dB(A) at 1m (typ)  Weatherproof for external installation  Simple installation with multi-fixing base plate  Approved by LPCB

CCP-E

 Approved to EN54-11:2001  Terminals can accommodate up to a

 Other colours available on request  Approved by LPCB

A Conventional Manual Call Point 2.5mm2 solid conductor

INTRINSICALLY SAFE & EXPLOSION PROOF CONVENTIONAL PRODUCTS Hochiki’s Intrinsically Safe and Explosion-Proof Conventional range of products has been designed around the existing worldproven CDX range. The detectors have been approved for hazardous area use by both LPCB and Germanischer Lloyd.

Note - Yellow version not EN54 compliant

CCP-W

An IP67 Conventional Weatherproof Call Point which can

be used externally.

CCP-SAVWIRE

Conventional Savwire Call Point Red based upon the industry

standard KAC world series housing and features easy to install, push-fit wiring terminals. The unit has been specifically designed for use on “Savwire” (two-wire) systems. The unit can support either a ‘Frangible Glass’ element or a ‘Non Frangible Plastic’ element.

CCP-KS

Conventional Key Switch Manual Call-Point based upon the industry

standard KAC 9000 series housing and features flying leads for simple wiring.

The unit features two key positions marked as “1” and “0” – with the key easily removable in either position

CDX

  

Approved to EN54-11:2001 Terminals can accommodate up to a 2.5mm solid conductor Designed for use on “Savwire” (two-wire) systems

 Two position keyswitch (marked 1 and 0)  Key removable in both positions  Terminals can accommodate up to a 2.5mm solid conductor  Supplied in RED - other colours available on request  Supplied with back box for surface fixing  Suitable for fire, security and other specialist applications

SLR-E-IS

A Conventional I.S. Photoelectric Smoke Detector designed for use in hazardous areas. Incorporates a remote indicator output and a removable chamber for easy maintenance.

DCD-1E-IS

A Conventional I.S. Rate of Rise Heat Detector designed for use

in hazardous areas. Incorporates a remote indicator output and a 60°C fixed temperature element.

YBN-R/4(IS)

A Conventional Detector Mounting Base associated with

the CDX Range of Intrinsically Safe Detectors and is fully compatible with the majority of existing conventional fire alarm control panels.

 Removable, High Performance chamber  Twin fire LEDs allow 360° viewing  Supported by a range of barriers  Remote indicator output  ATEX certification to: II 1G EEx ia IIC T5 ( Tamb=55°C)  Suitable for installation in areas at Category 1 (inc all lower categories)  Approved by LPCB, GL and to IECEx

     

CCP-E-IS

 Supports either a ‘Frangible Glass’ element or a ‘Non Frangible Plastic’ A Conventional Manual Call Point element designed for use in hazardous areas  Terminals can accommodate up to a and based upon the industry standard 2.5mm2 solid conductor KAC world series housing.  Approved to EN54 Part 12  Rugged design  GL Type approval  ATEX Classification to: II 1G EEx ia IIC T4

CCP-W-IS

An IP67 Conventional weatherproof call point designed

for use in hazardous areas and based upon the industry standard KAC world series housing.

Lid Colours

Transparent Black

Opaque White

Lid Colours

Transparent Black

Opaque White

CHQ-DZM(SCI)-IS

 Single loop address  Supports two independent zones of Hochiki I.S. Conventional Detectors  Both zones fully monitored for short/open-circuit  Requires an auxiliary 24 Vdc supply  DIN rail version available  Both models feature an integral short-circuit isolator  Both models approved by LPCB  Installed in safe area

CHQ-ISM

 Provides dual sounder circuits  Provides fault-monitored input  Interfaces between loop and I.S. sounders/beacons  Requires I.S. barrier  Allows 1 I.S. Sounder or Beacon to be connected.  Fully monitored for short-circuits  Requires 24 vdc external power supply  Also available as a DIN module  Installed in safe area

A Dual Zone Module which is fully compatible with Hochiki’s ESP analogue addressable protocol and I.S. equipment. The module will allow connection of up to 40 Hochiki I.S. conventional detectors (20 per zone) through a Galvanic isolator or Zener barrier, which are then fully monitored for open and short circuit. Also available as a DIN Rail mountable version. Both models feature an integral short-circuit isolator. This Sounder Control Module

interfaces between the Hochiki Analogue system via a CHQ-DSC or conventional sounder O/P’s and the intrinsically safe sounder/beacon units via an intrinsically safe barrier. The module provides line monitoring for open or short circuits on the wiring connected to both the safe and hazardous areas.

Z787

A Zener-Diode Barrier 2-channel,

DC version, positive polarity, Working voltage 26.5 V at 10 µA, Series resistance max. 327 Ω, Fuse rating 50 mA, DIN rail mounting, With diode return, Number of channels: 2-channel, Type: DC, positive, Working voltage: max. 27 V.

Z728

A Zener-Diode Barrier 1-channel,

DC version, positive polarity, Working voltage 26.5 V at 10 µA, Series resistance max. 327 Ω, Fuse rating 50 mA, DIN rail mounting, Number of channels: 1-channel, Type: DC, positive, Working voltage: max. 26.9 V.

 Sealed to IP67  Supports either a 'Frangible' glass element or a ‘Non Frangible' plastic element  Terminals can accommodate up to a 2.5mm2 solid conductor  Approved to EN54 Part 12  Rugged design, with anti-tamper facility  ATEX Classification to: II 1GD Ex ia IIC T4 Ga

   

Simple installation onto standard DIN ‘top-hat’ railing Removable colour-coded terminals for easy connection Can accommodate conductors up to 2.5 mm2 Supports two zones of I.S. products

KFDO-CS-EX2.51P

This isolated barrier is used for intrinsic safety applications. It transfers DC signals from fire alarms, smoke alarms, and temperature sensors in hazardous areas. It can also be used to control I/P converters, power solenoids, LEDs, and audible alarms.

      

IFD-E(IS)

  An Intrinsically Safe Conventional Infra-Red Flame  Detector designed to respond to low-frequency (1 to 15Hz) flickering IR  radiation emitted from flames during combustion, the unit can discriminate  between flames and spurious sources  of radiation such as sunlight.  

2-channel isolated barrier 24 V DC supply (loop powered) Current input/output 0 mA … 40 mA I/P or transmitter power supply Accuracy 1% Reverse polarity protection Up to SIL2 acc. to IEC 61508

Unaffected by convection currents, draughts or wind and solar-blind Tolerant of fumes, vapours, dust and mist ATEX certification to: EEx ia IIC T4 (135°C) (zones 0, 1 and 2) Responsive to a flame more than 25m away Selectable response speed Class 1 performance as defined in BS EN54-10:2002 (on the high sensitivity setting) Approved by LPCB SIL Capable

IFD-E(Exd)

 Unaffected by convection currents, draughts or wind and solar-blind

to respond to low-frequency (1 to 15Hz) flickering IR radiation emitted from flames during combustion, the unit can discriminate between flames and spurious sources of radiation such as sunlight.

     

A Conventional Explosion-Proof  Tolerant of fumes, vapours, dust and mist Infra-Red Flame Detector designed ATEX certificated to: EEx d IIC T6 (85°C) (zones 1, 21, 2 and 22) Responsive to a flame more than 25m away Selectable response speed Class 1 performance as defined in BS EN54-10:2002 (on the high sensitivity setting) Approved by LPCB SIL Capable

16091

 Flame-free UV testing, ideal for hazardous areas A Hand Held Flame Detector  Simple to use hand held unit with Tester providing a flame-free method rechargeable NiCd battery pack and of UV testing the industrial IR3 series charger of flame detectors: IFD-E, IFD-E(IS) and  Tests many Flame Sensors Types UV, the IFD-E(Exd). UV/IR, UV/IR2, IR3, IR2, IR  Range typically 3m and beyond  Selectable optical output intensity THIS EQUIPMENT IS ALSO AVAILABLE FOR with LED bar graph indication HIRE. Please contact your Regional Sales Manager for further information.

 Simple installation onto standard DIN ‘top-hat’ railing  Simplified installation and maintenance using plug-in connectors  Input circuit protected against reverse polarity  Supports 1 zone of I.S. Detectors

ATJ-EN/SIL

A Multi-Heat Sensor incorporating

SIL APPROVED DEVICES Hochiki Europe (UK) Ltd has introduced a range of devices independently evaluated and certified to SIL2 (Safety Integrity Level) with respect to their primary function (Detection, Manual Call Point, Audio Visual etc) under IEC61508 Functional Safety of Electrical/Electronic/Programmable Electronic Safety-related Systems.

ALN-EN/SIL

A Photoelectric Smoke Sensor

ALN-E/SIL

A Photoelectric Smoke Sensor

which incorporates Hochiki’s newest High Performance Chamber Technology removing the need to use Ionisation Smoke Sensors in the majority of applications

 Removable, High Performance chamber  Twin LEDs allow 360° viewing – green when polling, turn red in fire  Locking mechanism (sensor to base)  Variable sensitivity  Electronically addressed  Pulsing/non-pulsing controlled from panel*  Approved by LPCB & VdS  SIL Level 2 approved variants available

ACC-EN/SIL

A Multi Sensor incorporating

ACC-E/SIL

A Multi-Heat Sensor incorporating

a thermal element and a High Performance photoelectric smoke chamber. Has three modes controlled from the Control Panel, allowing either the optical or thermal element or both to be active in making the fire decision.

 User selectable modes  Incorporates Optical & Heat elements  Removable, High Performance Chamber  Twin fire LEDs allow 360° viewing  Pulsing/non-pulsing controlled from panel*  Variable sensitivity  Addressed via TCH-B200 Hand Held Pro  Approved by LPCB & VdS

ATJ-E/SIL

Sensor incorporating a variable Fixed Temperature heat element and Rate Of Rise heat element, both controlled from the Control Panel allowing either thermal element or both elements simultaneously to be active in making the fire decision.

 Variable flash frequency*  High Intensity LED technology  Independent control of Sounder and Beacon*  Auto-shutdown Mode available can be set independently for sounder or beacon*  Addressed via TCH-B200 Hand Held Programmer  Approved to EN54-23: 2010 - Category ‘O’

SLR-E-IS/SIL

 Removable, High Performance chamber

in hazardous areas. Incorporates a remote indicator output and a removable chamber for easy maintenance.

   

Remote indicator output ATEX certification to: II 1G EEx ia IIC T5 ( Tamb=55°C) Suitable for installation in areas at Category 1 (inc all lower categories) Approved by LPCB, GL and to IECEx

DCD-1E-IS/SIL

     

a Multi-Heat Sensor A Multi

A Conventional I.S. Photoelectric  Twin fire LEDs allow 360° viewing Smoke Detector designed for use  Supported by a range of barriers

A Conventional I.S. Rate of Rise Heat Detector designed for use

in hazardous areas. Incorporates a remote indicator output and a 60°C fixed temperature element.

YBN-R/3(SCI)/SIL

YBN-R/4(IS)/SIL

Intrinsically Safe Detector Base

Model YBN-R/4(IS) is a Conventional Detector Mounting Base associated with the CDX Range of Intrinsically Safe Detectors and is fully compatible with the majority of existing conventional fire alarm control panels.

YBO-BS/SIL

An Addressable Loop-Powered Base Sounder providing 13 volume

levels and 51 tones with a maximum output of up to 98 dB(A) (±2 dB(A)) with low current consumption. The unit is designed to fit either the YBN-R/3 or the YBO-R/SCI Bases.

YBO-BSB2/SIL

An Addressable Loop-Powered Base Sounder Beacon providing

*For product variant types see page 45

 Low Profile, only 8 mm  Rugged design  Dedicated cable screen terminal  Accepts from 1 to 2.5 mm cables  Quick connection via square cable clamps  Electronics free

CHQ-WS2/SIL

 Loop Powered  Single Loop Address - addressed An Addressable Loop-Powered via the TCH-B200 Hand Held Wall Sounder providing 8 volume Programmer levels and 51 tones with a maximum  Variable Sound Output 90 ~ 102 output of up to 102 dB(A) (±2 dB(A)) dB(A) (±2 dB(A)) output at 1 metre with low current consumption. Special  Weatherproof Kit available (see bases available: YBO-R/3(RED), below) YBO-R/SCI(RED), YBO-R/3(WHT) and  51 User-Selectable Tones (all tones YBO-R/SCI(WHT-SNDR). EN54-3 compatible)  Auto-shutdown Mode available*  Approved by LPCB, VdS & to SIL2

CHQ-WSB2/SIL

*Please ensure control panel compatibility

Lid Colours

CHQ-PCM(SCI)/SIL

Lid Colours

CHQ-ISM/SIL

Transparent Black

Opaque White

This Sounder Control Module

Lid Colours

CHQ-DZM(SCI)/SIL

A Dual Zone Module designed to

Lid Colours

Transparent Black

Opaque White

Lid Colours

Transparent Black

Opaque White

CHQ-DZM(SCI)-IS/SIL A Dual Zone Module which is

fully compatible with Hochiki’s ESP analogue addressable protocol and I.S. equipment. The module will allow connection of up to 40 Hochiki I.S. conventional detectors (20 per zone) through a Galvanic isolator or Zener barrier, which are then fully monitored for open and short circuit. Also available as a DIN Rail mountable version.

CHQ-DIM2(SCI)/SIL

   Input Module designed to interface to a variety of inputs such as door  contacts, sprinkler flow/door switches and plant equipment. Also available as a DIN Rail mountable version; both  models feature an integral short circuit isolator.  

Dual Input Module is a Dual

Single Loop Address Loop Powered 2 Independent Inputs for Monitoring of Volt Free Contacts Each Input can be Configured to Monitor either Normally Open or Normally Closed contacts DIN-Rail version available Both models feature an integral SCI Both models approved by LPCB SIL2 approved

Lid Colours

Transparent Black

Opaque White

CHQ-DRC2(SCI)/SIL

Dual Input Module is a Dual

NOTES ________________________________________ ________________________________________ ________________________________________ ________________________________________

HCP-E(SCI)/SIL

A Manual Call Point Isolator

       

Note - requires SR MOUNTING BOX if surface mounted (sold separately) (see page 10)

HCP-W(SCI)/SIL

An IP67 Weatherproof Manual Call Point Isolator fully compatible

        

Fast response Integral short-circuit isolator Bi-colour status LED Non-frangible element fitted as standard (conforms to EN54) Addressed with TCH-B200 Hand Held Programmer & PL-3 Surface mounting LPCB Approved to EN54 IP67 rated Approved to SIL2

________________________________________ ________________________________________ ________________________________________ ________________________________________ ________________________________________ ________________________________________ ________________________________________ ________________________________________ ________________________________________ ________________________________________ ________________________________________

CCP-E-IS/SIL

 Supports either a ‘Frangible Glass’ element or a ‘Non Frangible Plastic’

A Conventional Manual Call Point element

designed for use in hazardous areas  Terminals can accommodate up to a and based upon the industry standard 2.5mm2 solid conductor KAC world series housing.  Approved to EN54 Part 12  Rugged design  GL Type approval  ATEX Classification to: II 1G EEx ia IIC T4

CCP-W-IS/SIL

An IP67 Conventional weatherproof call point designed

for use in hazardous areas and based upon the industry standard KAC world series housing.

LINEAR

HEAT DETECTION The Linear Heat Detection Cable (LHDC) System from Hochiki is designed to provide early detection of fire and overheating in circumstances where other forms of detection would not be viable, either due to inability to sustain the environment requirements or through prohibitive costs. Extensive single zonal lengths of the specially designed LHDC may be installed with the ability to trigger alarms for hot spots occurring on very small sections of the overall cable and, providing the LHDC has not been subjected to excessive temperatures, the alarm condition can be reset at the zonal controller.

LDM-519-LP

Analogue LHD Interface

The module is designed to monitor a zonal length of Analogue Cable for both an elevated temperature (Fire) condition, and Fault Status (Open & Short Circuit).

 Adjustable Alarm set point  LED Indication of Fire, Fault and Supply Status

LHDC ANALOGUE CABLE

Analogue LHDC Heat Detection Cable is designed to provide early

detection of fire and overheating in circumstances where other forms of detection would not be viable, either due to inability to sustain the environment requirements or through prohibitive costs.

Hochiki’s FIREwave system raises wireless fire detection and alarm systems to new levels of reliability and flexibility. The system utilises the latest wireless technology to provide rapid, yet economic wireless fire system installations with the minimum of disturbance to the surroundings. Ideal for historic buildings, remote sites and any project where the installation of fire cabling is difficult, overly expensive or prohibited.

RSM-WTM

 Loop Powered  Bi-directional wireless communication  Self optimising wireless amplitude detection system to be interfaced and frequency directly onto the loop. Fully loop Automatic wireless channel hopping powered, the unit can support up to  Fully intelligent 32 wireless devices* and up to 7 RSM-  High reliability and sensitivity EXP Expander Modules**.  Flexible on site device adjustment  IP65 protection for exterior mounting  Makes additions to existing wired systems easy and cost effective  LPCB approved

 Adjustable Alarm set point  Recoverable and resettable operation  Can detect hot spots  Zones of up to 500m in length  Mechanical & Chemical protection available  Easy to install  Compatible with a full range of monitoring devices  RoHS compliant — Lead Free

RSM-EXP

  to monitor a length of Digital Linear Heat Detection Cable (LHDC) for both  a fire condition, and fault status (open  circuit). The DIM module is certified to be fully compatible with SIL 2 certified  systems.  LHDC Hazardous Area use by  means of Intrinsically safe Zener  Barrier

Fault monitoring of LHDC for open circuit conditions LED Indication of Fire, Fault & Supply status Integral Test & Reset push-buttons Volt free contact outputs for Fire and Fault conditions Indicator and control switch connections for local fascia implementation DIN rail Mounting Electronically addressed SIL 2 certified

LHDC DIGITAL CABLE

Early Detection of hazards at temperatures well below flame point Rugged construction—Stainless Steel outer sheath available Fixed Alarm Trigger Temperature Compatible with many existing zone monitors / Control Equipment Intrinsically Safe Configurable for Hazardous Areas UL Listed SIL 2 Approved

Digital LHDC Interface is designed

  detection of fire conditions and  overheat-ing in circumstances where  other forms of detection would not be viable, either due to an inability to  sustain the environment requirements or through prohibitive costs.  

WIRELESS FIRE DETECTION

 Analogue address interface, Line powered configurable  Fault Monitoring for open & short circuits  Selectable Latching / Auto reset operation  VFC outputs for Fire & Fault conditions  Operable from two wire fire panel trigger circuits  SIL 2 Certified

LDM-519-DIM

Digital LHDC Heat Detection Cable is designed to provide early

FIREwave

* Other products available. Please speak to your regional sales manager or visit www.hochikieurope.com/lhdc for further details.

A Wire to Wireless Translator Module which allows a wireless fire

A Wireless Expander Module

which allows extended signal coverage for the wireless system by boosting signal strengths from translators, to cover larger buildings for example. Up to 7 RSM-EXP Expander Modules** can be supported by a single RSM-WTM Wireless Translator Module.

 Bi-directional wireless communication  Self optimising wireless amplitude and frequency  Automatic wireless channel hopping  Fully intelligent  High reliability and sensitivity  Flexible on site device adjustment  IP65 protection for exterior mounting  Makes additions to existing wired systems easy and cost effective  Requires external power supply (24 Vdc)  LPCB approved The RSM-WTM Translator Module (T) is fitted to the analogue addressable fire system loop. It then provides an interface between the loop and the wireless devices. The module is fully powered by the loop and full control and monitoring of the wireless devices is possible through the control panel.

SYSTEM ARCHITECTURE

The RSM-EXP Expander Module (E) allows the wireless system to provide greater coverage by receiving and re-transmitting the boosted wireless signal.

*Maximum number of 16 output devices such as A/V or output modules.

**Maximum of 5 child Expander Modules connected in cascade or a maximum of 3 child Expander Modules connected directly to the Translator Module or another Expander Module

 Bi-directional wireless communication A Wireless Conventional Interface  Self optimising wireless amplitude Module which allows a zone of and frequency wireless devices to be added to an  Automatic wireless channel hopping existing conventional zone (or as a  Fully intelligent stand-alone zone). The zone is wired  High reliability and sensitivity directly to the RSM-CIM which is then  Flexible on site device adjustment in turn supported by an RSM-EXP  IP65 protection for exterior mounting Expander Module.  Makes additions to existing wired systems easy and cost effective  Requires external power supply for use as stand-alone zone

ROD-E

 Patented smoke chamber design  Bi-directional wireless communication

a patented smoke chamber ensuring optimal smoke sensitivity with increased protection from airborne contamination and background illumination. The sensor is fitted with a single omni-directional LED and a reed switch facility allowing testing using a magnet.

alarms  Automatic wireless channel hopping  Fully intelligent with high reliability and sensitivity  Flexible on site device adjustment  Makes additions to existing wired systems easy and cost effective  Compliant with current EN54 European standards. LPCP approved.

RSM-IP

RHD-E

   sensing element. The sensor is fitted  with a single omni-directional LED and  a reed switch facility allowing testing using a magnet.   

Thermistor-type heat sensing element Bi-directional wireless communication Adaptive signal processing helps with the elimination of false alarms Automatic wireless channel hopping Fully intelligent with high reliability and sensitivity Flexible on site device adjustment Makes additions to existing wired systems easy and cost effective Compliant with current EN54 European standards. LPCP approved.

 Contacts can be configured as N/O or N/C A Wireless Single Channel Output  Bi-directional wireless Module which allows the control communication panel to activate/switch the circuits  Self optimising wireless amplitude of an external device wirelessly via and frequency an RSM-EXP or RSM-WTM. The unit’s  Automatic wireless channel hopping contacts can be configured to be  Fully intelligent normally open or normally closed and  High reliability and sensitivity switch at 30 Vdc at 2 A.  Flexible on site device adjustment  Makes additions to existing wired systems easy and cost effective  Requires external power supply

RMD-E

  A Wireless Intelligent Multi  Sensor with a patented smoke chamber and thermistor heat sensing  element. The sensor is fitted with a  single omni-directional LED and a reed switch facility allowing testing using  a magnet.  

Detects smoke and/or heat Bi-directional wireless communication Adaptive signal processing helps with the elimination of false alarms Automatic wireless channel hopping Fully intelligent with high reliability and sensitivity Flexible on site device adjustment Makes additions to existing wired systems easy and cost effective Compliant with current EN54 European standards. LPCP approved.

RSM-POM

RSM-WS(RED)

3 Tones, adjustable volume up to 100 dB(A) Bi-directional wireless communication Automatic wireless channel hopping Easy and cost-effective additions to existing wired systems Compliant with current EN54 European standards and BS5839 IP21C LPCB approved

RSM-CIM

A Wireless Single Channel Input Module which allows the on/off

status (alarm/fault) of an external device to be transmitted to a control panel wirelessly via an RSM-CIM, RSM-EXP or RSM-WTM.

       

Latching Input circuits are monitored for fire and fault conditions Bi-directional wireless communication Self optimising wireless amplitude and frequency Automatic wireless channel hopping Fully intelligent High reliability and sensitivity Flexible on site device adjustment Makes additions to existing wired systems easy and cost effective

RSM-OP

A Wireless Powered Output Module which allows the control

panel to activate/switch the circuits of an external device or system wirelessly via an RSM-CIM, RSM-EXP or RSM-WTM. The unit’s contacts can be configured to be normally open or normally closed and switch at 30 Vdc/125 Vac at 2 A. The unit can be configured to provide either a 12 Vdc or a 24 Vdc output.

        

Contacts can be configured as N/O or N/C Selectable output - 12 Vdc or 24 Vdc Bi-directional wireless communication Self optimising wireless amplitude and frequency Automatic wireless channel hopping Fully intelligent High reliability and sensitivity Flexible on site device adjustment Makes additions to existing wired systems easy and cost effective

RSM-CP

A Wireless Resettable Manual  Bi Directional wireless communication Call Point which features a simulated  Fully intelligent

glass front. When activated, a plastic ‘flag’ is displayed in the window of the unit; the supplied key will reset the flag and unit. Supplied with back box. Weatherproof version also available (RSM-CP/W).

 Utilises standard low cost lithium battery technology  Long battery life  Resettable Element  Clear ‘device activated’ warning flag  High reliability  Automatic channel hopping  Self optimising wireless amplitude and frequency

A Wireless Intelligent  Adaptive signal processing helps Photoelectric Smoke Sensor with with the elimination of false

A Wireless Intelligent Rate of Rise Heat Sensor with a thermistor

A Wireless Intelligent Wall Sounder providing 3 tones with

an adjustable volume level up to a maximum output of 100 dB(A), adjustable down in increments of 6 dB(A). Also available in white, RSMWS(WHT).

RSM-WS/W(RED)

A Wireless Intelligent Weatherproof Wall Sounder

providing 3 tones with an adjustable volume level up to a maximum output of 100 dB(A), adjustable down in increments of 6 dB(A). Also available in white, RSM-WS/W(WHT).

      

 3 Tones, adjustable volume up to 100 dB(A)  Bi-directional wireless communication  Automatic wireless channel hopping  Easy and cost-effective additions to existing wired systems  Tested to EN54 European standards and BS5839  IP66

RSM-BS

A Wireless Intelligent Base Sounder providing 32 tones as

standard with a volume range of between 90.1 to 92.4 dB(A) at 1 metre. The pre-moulded base will accommodate any type of FIREwave wireless detector, or a locking cover plate (RSM-C).

 32 Tones, adjustable volume from 90.1 to 92.4 dB(A)  Bi-directional wireless communication  Automatic wireless channel hopping  Easy and cost-effective additions to existing wired systems  Compliant with current EN54 European standards  LPCP approved

FIRElink AIR SAMPLING SYSTEM

Hochiki’s FIRElink range of high sensitivity air sampling equipment consists of detectors and sampling pipe accessories to the very highest levels of sensitivity in environments such as computer areas and clean rooms. In these applications it is able to give warning to the very slightest trace of smoke. All detectors in the FIRElink range have been approved to EN54-20:2006 Classes A, B & C by LPCB.

RSM-BSB

 32 Tones, adjustable volume from 90.1 to 92.4 dB(A)

FIRElink-25

as standard with a volume range of between 90.1 to 92.4 dB(A) at 1 metre and a 1 Hz flash rate. The premoulded base will accommodate any type of FIREwave wireless detector, or a locking cover plate (RSM-C).

communication  Automatic wireless channel hopping  Easy and cost-effective additions to existing wired systems  Compliant with current EN54 European standards and BS5839  LPCP approved

high sensitivity smoke detection. The unit will automatically setup for easy installation and is also designed to fit into a Docking Station which accepts all sampling pipes and cables leaving the detector to be fitted during the final commissioning phase.

A Wireless Intelligent Base  Flash rate of 1 Hz Sounder Beacon providing 32 tones  Bi-directional wireless

*Note - Non EN54-23 Compliant (supplementary indicator)

REPLACEMENT BATTERIES PRIMARY BATTERY

Spare Primary Battery (pack of 10)

SECONDARY BATTERY

Spare Secondary Battery ( pack of 10)

A Single Pipe Air Sampling Detector designed to provide very

FIRElink-100

 Ultra small, low cost aspirating smoke detector A Two Pipe Air Sampling Detector  High sensitivity provided by laser designed to provide very high based forward light scatter for sensitivity smoke detection. The reliable early warning unit will automatically setup for easy  Two sampling pipes up to 100m installation and is also designed to fit (aggregate) in length (still air) into a Docking Station which accepts  False alarms reduced by unique all sampling pipes and cables leaving dust discrimination the detector to be fitted during the  RS485 communications for final commissioning phase. networking and remote communications  Approved LPCB

FIRElink-400

A Four Pipe Air Sampling Detector designed to provide very

high sensitivity smoke detection with inherent immunity to dust/dirt build-up. Discriminates between ‘dirty’ and ‘clean’ operating periods such as day and night, automatically substituting appropriate system sensitivity without the need for external input or adjustment.

FIRElink-400CM

A Four Pipe Air Sampling Detector with integral Command Module designed to provide very

high sensitivity smoke detection with inherent immunity to dust/dirt build-up. Added “Command Module” allows the user to control, program and test other FIRElink units on the same “network”.

 Ultra small, low cost aspirating smoke detector  High sensitivity provided by laser based forward light scatter for reliable early warning  Single sampling pipe up to 50m in length (still air)  False alarms reduced by unique dust discrimination  RS485 communications for networking and remote communications  Approved LPCB

 High sensitivity provided by laser based forward light scatter for reliable early warning  Four sampling pipes up to 200m (aggregate) in length (still air)  False alarms reduced by unique dust discrimination  RS485 communications for networking and remote communications  Approved LPCB

FL-RC

An Input Relay Card designed to provide detector inputs that may be programmed for Remote Day/Night Mode Changeover, Remote Reset or ClassiFire Override as well as power supply fault monitoring.

FL-APIC

An Addressable Protocol Interface Card used to decode and relay FIRElink detector information directly to an Hochiki ESP compliant Fire Control Panel.

FIRElink Sampling Pipes

and connectors used in conjunction with the FIRElink Range of Air Sampling Detectors. The PipeCAD software supplied with each FIRElink detector calculates the length of pipe and configuration of sampling holes required for each installation.

 4 staged normally open relay outputs for unmonitored connection to other systems  Relay contacts rated at 0.4 A @24 Vdc  Only compatible with FIRElink-25 and FIRElink-100  Common Fault relay energised normally closed for fail safe operation

  

Supports both single and multi mode operation Full address range (1 - 127) Compatible with all FIRElink detectors and command modules

ANCILLARY EQUIPMENT

Hochiki’s comprehensive range of ancillary equipment includes products to help make routine maintenance and commissioning of analogue and conventional smoke detectors easier and more reliable. The range includes head removal tools, heat detector tester poles, loop commissioning and emulation equipment and duct smoke detection equipment.

DH-24

An Electromagnetic Door Holder

designed to hold open fire doors and is ideally suited for hospitals, schools and other public buildings. In a fire situation the doors can be released automatically via a connection to the fire alarm system or manually by activating the release button.

     

24 Vdc Surface mounted 200 Newton holding force Swivel keeper plate Spring-loaded ejector pin Manual release button

SDP-3

 Allows air duct sampling using standard detector or sensor  Fits either square or round section ducting (with additional brackets)  One-tube air sampling system  Test hole on cover  Simple installation/maintenance  Sensitive flow indication  Installer-friendly connection of cables

TCH-B200

   

A Duct Probe Housing allowing a standard photoelectric smoke detection device, either a conventional detector or an analogue sensor, to be mounted on the outside of an air duct for the purpose of monitoring the air within the duct.

Prices and further details provided upon request.

FIRElink Dust Filters

FL-DF1 Hochiki Dust Filter For FIRElink

400 Series

FL-DF2 Hochiki Dust Filter For FIRElink 25/100 Series Prices and further details provided upon request.

A Hand Held Address Programmer designed to address

the ESP range of Sensors and other addressable devices such as the YBO-BS Base Sounder. Designed to be light, robust and easy to use it, operates from a single PP3 size battery which can provide up to 8000 operations.

Lightweight Design Quick and Reliable Addressing Over 8000 Address Settings From One Battery Displays Sensor Analogue Value

(shown with sensor fitted – not supplied)

16091

 Flame-free UV testing, ideal for hazardous areas A Hand Held Flame Detector  Simple to use hand held unit with Tester providing a flame-free method rechargeable NiCd battery pack and of UV testing the industrial IR3 series charger of flame detectors: IFD-E, IFD-E(IS) and  Tests many Flame Sensors Types UV, the IFD-E(Exd). UV/IR, UV/IR2, IR3, IR2, IR  Range typically 3m and beyond THIS EQUIPMENT IS ALSO AVAILABLE  Selectable optical output intensity FOR HIRE. Please contact your Sales with LED bar graph indication Representative for further information.

YBN-UA

A Recess Mounting Adaptor

for both the ESP and CDX Range of sensors and detectors and their associated mounting bases. Allows a base and head combination to be flush mounted by providing a recess fixing to the ceiling.

 Allows base and analogue sensor or conventional detector to be flush mounted  Supplied with fixing brackets  Colour-matched to existing ivory- coloured sensor/detector ranges  Sturdy construction, easy to install  Suitable for a maximum ceiling thickness of 30mm

(shown with base fitted – not supplied)

YBD-RA

A Surface Wiring Adaptor which allows the majority of Hochiki Sensors/ Detectors and their Mounting Bases to be fitted flush against a fixing surface, whilst also allowing surface wiring (without conduit) to be connected.

 Compatible with the majority of existing Analogue and Conventional bases  Colour matches standard Hochiki Analogue and Conventional sensor/detector/base ranges  4 pre-moulded knock-outs provide wiring entry  Low profile - only 16mm

 Allows simulation of up to 4 loops of Hochiki analogue devices (127 A Loop Emulator System which per loop) consists of Software and a Hardware  System ‘Cause and Effect’ can be Interface that together allow a ‘virtual’ verified along with double address loop to be created on a PC connected and short circuit simulation to a Fire Alarm Control Panel. In this  Saves time and installation costs as way, a complete fire detection system whole system can be tested can be tested and proven before any ‘virtually’ actual hard-wiring commences, saving time and resources.

Fibreglass Poles designed to be completely interchangeable with all of the SOLO Tools. Manufactured in a lightweight fibreglass, the poles are completely non-conductive and have been subjected to rigorous conductivity testing to ensure the integrity of the insulating qualities.

TESTIFIRE

A Universal Detector Removal Tool suitable for the majority of current Hochiki detectors*

 Colour-coded grips twist into place to create different size combinations  Universal, counterbalanced joint ensures the tool remains horizontal

*Except those with flying leads, for example the DFG-60E or the ACB-EW.

TE-TLE

SOLO POLES

SOLO 200

 Lightweight, non conductive  Accept all of the SOLO tools  Can extend to 9m

 Faster, more productive testing with just one tool Testifire is a fully portable field device  Simultaneous stimuli (smoke and for functional testing of fire detectors. heat) can cut test times in multi- The unit is suitable for testing optical/ sensors by up to 66% photoelectric and ionisation smoke  Stimuli capsules for smoke and CO sensors, thermal sensors (fixed held within unit temperature or rate-of-rise), and  Powered by battery batons within carbon monoxide (CO) fire sensors, pole be they conventional, addressable or  Clearing cycle provides rapid analogue addressable. detector reset with no repeat alarm  Heat detector test times reduced through wider range of settings

SOLO 330

 Robust, lightweight design  Spring-loaded dispenser mechanism conserves aerosol  Touch sensitive, ideal for suspended ceilings  Clear cup allows view of detector LED  Test gas canisters (non CFC) are available containing either simulated smoke (for testing smoke detectors), CO (for testing CO detectors) or air (for removing dust from detectors)

A Smoke Detector Tester providing

functional testing to introduce (simulated) smoke or CO through the detector vents and into the sensing chamber.

SOLO 423/424

 Initiates heat detectors into alarm, whether rate of rise or fixed.  Comes complete with a 5m lead as standard (Optional 5m extension available)

SOLO 461

 Safe, cable free, battery-powered operation  Supplied with 2 Battery BatonsTM and a fast charger  Intelligent device, only heats when detector present

A Heat Detector Tester mainspowered and available in both 110/120 and 220/240 V versions.

A Cordless Heat Detector Tester

which utilises Cross Air Technology to ensure the correct temperature is applied to the sensing elements, not the detector plastics.

SOLO 823 KIT

A universal set for testing and removing smoke and heat detectors up to 9m high.

Contains:  1 x Solo 100 Telescopic Pole  3 x Solo 101 Extension Pole  1 x Solo 200 Universal Detector Removal Tool  1 x Solo 330 Aerosol Smoke Dispenser  1 x Solo 461 Cordless Heat Detector Test Kit (includes 2 Battery Batons™ and Charger)  1 x Solo 610 Protective Carrying Bag

HE-PSU(2.5A)

 Enclosure mounted with battery space  110 V or 230 V input  Regulated, true 24 V output  Intelligent battery charging and temperature compensation  House up to 26 Ah batteries  Status indicators for monitored faults  Dual output for powering fire alarm control panels remotely  Fully enclosed and robust construction

PL-3

HE-PSU(5.25A)

REMOVAL TOOL-3

SMB-1

 Quick-release screws Polyurethane gasket provides IP66 protection  Corrosion free, resistant to most alkaline and acid  Temperature resistance to +70°C, Impact resistant, and Non-flammable  32 knock-outs  Grey lid available SMB-1 (Lid)

SMB-2

 Designed to house up to 6 Hochiki DIN Modules  Quick-release screws  Polyurethane gasket provides IP66 protection  Corrosion free, resistant to most alkaline and acid  Temperature resistance to +70°C, Impact resistant, and Non- flammable  32 knock-outs  Supplied with DIN Rail and fixings  Grey lid available SMB-2 (Lid)

A stand-alone power supply unit with integrated charger designed to be used with Hochiki’s FIRElink range of air sampling detectors and the CHQ Modules that are non loop-powered (CHQ-DZM, CHQ-DZM(IS) and CHQ-DSC).

An IP66 rated, grey (RAL7035) enclosure designed for use with the Hochiki range of Modules. Supplied with a transparent black lid as standard. Used in conjunction with the SMB-ADAPTOR this enclosure can house any of the PCB assemblies from the Hochiki Smart-Fix Module range.

An IP66 rated, grey (RAL7035) enclosure designed for use with the Hochiki range of DIN Modules. Supplied with a transparent black lid as standard. The unit is supplied with a DIN Rail section (plus fixings) and will accept up to six Hochiki DIN Rail Modules, side-by-side.

SMB-3

 Designed to house up to 4 Hochiki DIN Modules A grey (RAL7035) enclosure designed  Quick-release screws for use with the Hochiki range of DIN  Polyurethane gasket provides IP66 Modules. Supplied with a transparent protection black lid as standard. The unit is  Corrosion free, resistant to most supplied with a DIN Rail section (plus alkaline and acid fixings) and will accept up to four  Temperature resistance to +70°C, Hochiki DIN Rail Modules, side-by Impact resistant, and Non- side. flammable  20 knock-outs  Supplied with DIN Rail and fixings  Grey lid available SMB-3 (Lid)

Additional Programming Lead 3 Way Connection For use on

Hochiki devices that feature the square programming terminal, HCPE(SCI) call points for example. The jack plug fits into the socket on the TCH-B200 programmer and the square programming plug fits to the device.

 For use with Hochiki devices with square connector  Allows connection of TCH-B200 programmer

Outer Cover Removal Tool allows the case of any photoelectric sensor or detector to be removed easily, even if the locking tabs have been employed. This allows easy access to the photoelectric chamber for maintenance or replacement. Fits ALN-EN, ACC-EN and ATJ-EN only.

CHQ-SUB

 Robust design  Compatible with all CHQ Modules  Used to replace damaged components

CHQ-BACKBOX

 Provides glanded cable connections  Robust design  Compatible with all CHQ Modules

The CHQ-SUB Assembly is a set of replacement components designed to fit any of the existing CHQ Modules: CHQ-DIM(SCI), CHQ-SZM(SCI), CHQ-DZM(SCI), CHQ-DSC(SCI), CHQMRC(SCI), CHQ-DRC(SCI), CHQ-ISM and CHQ-PCM. The sub-assembly consists of the PCB tray, PCB cover and semi-opaque lid and can be used in cases where an existing module housing becomes damaged and needs replacement. The Module Backbox is designed

for installations where the CHQ Range of Modules - CHQ-DIM(SCI), CHQ-SZM(SCI), CHQ-DZM(SCI), CHQDSC(SCI), CHQ-MRC(SCI), CHQ-DRC(SCI) and CHQ-PCM - require mounting within a glanded enclosure. The unit features ten knock-outs suitable for cable glands (not supplied) and accepts the CHQ Modules directly as a lid.

CHQ-ADAPTOR

 Allows the PCB component of a CHQ Module to be housed in an Adaptor for the New CHQ Modules enclosure designed to allow the “Smart-Fix“  Footprint matches older enclosure range of CHQ Modules to be housed in sizes existing enclosures originally designed for the first generation CHQ-OEM Modules by modifying the ‘footprint’ of the unit.

SI-CAP2

 Protects Wiring Terminals on Isolator Bases and Base Sounders

A Protective Cap which can be fitted  Easy to Fit (Twist-fit) to the YBO-R/SCI isolator base range, the YBO-BS base sounder or the YBOBSB base sounder beacon when either of these devices isn’t fitted with a sensor. It can also fit the YBN-R/3 and the YBN-R/3(SCI).

A Guide To Our Sounder/ Beacon Variants Example product code

CHQ-WSB2(WHT)/RL RL = Red LEDs WL = White LEDs

WHT = White Case

YBO-BSB2

An Addressable Loop-Powered Base Sounder Beacon Product Type

Product Code

LED Colour

Case Colour

Rating

Base Sounder Beacon

YBO-BSB2/WL

White

Ivory

'O'

Base Sounder Beacon

YBO-BSB2/RL

Red

Ivory

'O'

Base Sounder Beacon

YBO-BSB2(WHT)/WL

White

‘O’

Base Sounder Beacon

YBO-BSB2(WHT)/RL

Red

White

'O'

CHQ-WSB2

An Addressable Loop-Powered Wall Sounder Beacon

Product Type

Product Code

LED Colour

Case Colour

Rating

Wall Sounder Beacon

CHQ-WSB2/WL

White

Red

'O'

Wall Sounder Beacon

CHQ-WSB2/RL

Red

'O'

Wall Sounder Beacon

CHQ-WSB2(WHT)/WL

White

‘O’

Wall Sounder Beacon

CHQ-WSB2(WHT)/RL

Red

White

'O'

A Guide To Our Conventional Beacon Variants

A Guide To Our Ceiling Beacon Variants

Example product code

CWST-WR-S5

CWST-S5

R = Red Case

R = Red LEDs

S = Standard Base

W = White Case

W = White LEDs

W = Weatherproof Base

Led Colour

Case Colour

Product Type

EN54-23 Ratings Wall Fitted

WL = White LEDs

RED = Red Case

RL = Red LEDs

An Addressable Loop-Powered Ceiling Beacon

A Conventional Weatherproof Beacon Product Code

WHT = White Case

CHQ-CB

CWST-W5

A Conventional Beacon Product Type

CHQ-CB(WHT)/WL

Product Code

LED Colour

Case Colour

Ceiling Fitted

Conventional Beacon

CWSTRR-W5

Red

W-2.4-6.2

C-3-9.4

C-6-8.6

Conventional Beacon

CWSTRR-S5

Red

W-2.4-6.2

C-3-9.4

C-6-8.6

Conventional Beacon

CWSTRW-S5

White

Red

W-2.4-9.0

C-3-9.5

C-6-9.5

C-9-9.5

Conventional Beacon

CWSTRW-W5

White

Red

W-2.4-9.0

C-3-9.5

C-6-9.5

C-9-9.5

Conventional Beacon

CWSTWR-S5

Red

White

W-2.4-6.2

C-3-9.4

C-6-8.6

Conventional Beacon

CWSTWR-W5

Red

White

W-2.4-6.2

C-3-9.4

C-6-8.6

Conventional Beacon

CWSTWW-W5

White

W-2.4-9.0

C-3-9.5

C-6-9.5

C-9-9.5

Conventional Beacon

CWSTWW-S5

White

W-2.4-9.0

C-3-9.5

C-6-9.5

C-9-9.5

EN54-23 Ratings

Ceiling Beacon

CHQ-CB/WL

White

Ivory

C-3-5

C-3-7.5

C-3.10

Ceiling Beacon

CHQ-CB (RED)/ WL

White

Red

C-3-5

C-3-7.5

C-3-10

Ceiling Beacon

CHQ-CB (WHT)/WL

White

C-3-5

C-3-7.5

C-3-10

Ceiling Beacon

CHQ-CB/WL-15

White

Ivory

C-3-10

C-3-15

Ceiling Beacon

CHQ-CB (RED)/ WL-15

White

Red

C-3-10

C-3-15

Ceiling Beacon

CHQ-CB (WHT)/WL-15

White

C-3-10

C-3-15

Ceiling Beacon

CHQ-CB/RL

Red

Ivory

C-3-7.5

C-3-10

Ceiling Beacon

CHQ-CB (RED)/ RL

Red

C-3-7.5

C-3-10

Ceiling Beacon

CHQ-CB (WHT)/RL

Red

White

C-3-7.5

C-3-10

A Guide To Our Wall Beacon Variants Example product code

CHQ-WB(WHT)/WL WHT = White Case

WL = White LEDs

RED = Red Case

RL = Red LEDs

CHQ-WB

An Addressable Loop-Powered Wall Beacon Product Type

Product Code

LED Colour

Case Colour

EN54-23 Ratings

Wall Beacon

CHQ-WB/WL

White

Ivory

W-2.4-5

W-2.4-6

W-2.4-7

Wall Beacon

CHQ-WB (WHT)/WL

White

W-2.4-5

W-2.4-6

W-2.4-7

Wall Beacon

CHQ-WB (RED)/WL

White

Red

W-2.4-5

W-2.4-6

W-2.4-7

Wall Beacon

CHQ-WB/RL

Red

Ivory

W-2.4-5

Wall Beacon

CHQWB(WHT)RL

Red

White

W-2.4-5

Wall Beacon

CHQ-WB(RED) RL

Red

W-2.4-5

CONTENTS 16091 17, 39 ACB-EM 12 ACB-EW 4 ACC-E/SIL 26 ACC-EN 4 ACC-EN/SIL 26 ALG-ENM 12 ALN-E/SIL 26 ALN-EN 4 ALN-EN/SIL 26 ATJ-E/SIL 27 ATJ-EN 4 ATJ-EN/SIL 27 BANSHEE EXCEL IP66 20 BANSHEE EXCEL LITE IP66 20 BANSHEE EXCEL LITE 20 BANSHEE EXCEL 20 CCP-W-IS/SIL 31 CCP-E 21 CCP-E-IS 23 CCP-E-IS/SIL 30 CCP-KS 22 CCP-SAVWIRE 22 CCP-W-IS 24 CCP-W-IS/SIL 30 CHQ-AB 7 CHQ-ADAPTOR 43 CHQ-ARI 7 CHQ-BACKBOX 43 CHQ-CB 7 CHQ-DIM2(SCI) 8 CHQ-DIM2(SCI)/SIL 29 CHQ-DIM/M(SCI) 14 CHQ-DRC2(SCI) 8 CHQ-DRC2(SCI)/SIL 30 CHQ-DRC/M(SCI) 13 CHQ-DSC2(SCI) 8 CHQ-DSC/M(SCI) 14 CHQ-DZM (SCI)/SIL 30 CHQ-DZM (SCI)-IS/SIL 29 CHQ-DZM(SCI) 9 CHQ-DZM(SCI)-IS 24 CHQ-ISM 24 CHQ-ISM/SIL 29 CHQ-MRC2 9 CHQ-PCM (SCI)/SIL 29 CHQ-PCM(SCI) 9 CHQ-POM 7 CHQ-SIM 8 CHQ-SOM 8 CHQ-SUB 43 CHQ-SZM2(SCI) 9 CHQ-SZM/M(SCI) 14 CHQ-WB 7 CHQ-WPK 6 CHQ-WS2 6 CHQ-WS2/SIL 28 CHQ-WSB2 6 CHQ-WSB2/SIL 28

RSM-BSB 36 CLB-E 20 RSM-CIM 34 CSBB-E 19 RSM-CP 34 CSB-E 19 RSM-EXP 33 CWSB-E 19 RSM-IP 34 CWST-S5 21 RSM-OP 34 CWST-W5 21 RSM-POM 34 DCD-1E-IS 11, 23 RSM-WS(RED) 35 DCD-1E-IS/SIL 27 RSM-WS/W(RED) 35 DCD-AE3 16 RSM-WTM 33 DCD-AE3M 12 SDP-3 39 DCD-CE3 16 DCD-CE3M 12 SI-CAP2 44 DFG-60BL KJ 17 SLR-E3N 16 DFJ-AE3 16 SLR-E3NM 11 DFJ-CE3 17 SLR-E-IS 11, 23 DH-24 39 SLR-E-IS/SIL 27 DRD-E 17 SMB-1 42 DRD-EM 11 SMB-2 42 FB/024/R/W 21 SMB-3 42 FB-1 5 SOLO 200 41 FIRElink Dust Filters 38 SOLO 330 41 FIRElink Sampling Pipes 38 SOLO 423/424 41 FIRElink-100 37 SOLO 461 41 FIRElink-25 37 SOLO 823 KIT 41 FIRElink-400 37 SOLO POLES 40 FIRElink-400CM 37 SPC-ET 18 FIRElink-NANO 38 SR-BACKBOX 10 FL-APIC 38 TCH-B200 5, 39 FL-RC 38 TESTIFIRE 40 HCP-E (SCI)/SIL 30 TE-TLE 40 HCP-E(SCI) 9 UV/IR2 17 HCP-E/M(SCI) 15 WCP1A 14 HCP-W (SCI)/SIL 30 YB0-BSB2/SIL 27 HCP-W(SCI) 10 YBD-RA 40 HCP-W/M(SCI) 15 YBN-R/3 (SCI)/SIL 27 HE-PSU(2.5A) 42 YBN-R/3 5 HE-PSU(5.25A) 42 YBN-R/3(SCI) 5 IFD-E 17 YBN-R/3(SCI)-OEM 5 IFD-E(Exd) 25 YBN-R/3M 13 IFD-E(IS) 25 YBN-R/4(IS) 13 KFDO-CS-EX2.51P 24 YBN-R/4(IS)/SIL 28 LDM-519-DIM 32 YBN-R/4(IS) 23 LD-519-LP 32 YBN-R/6 18 LHDC ANALOGUE CABLE 32 YBN-R/6M 13 LHDC DIGITAL CABLE 32 YBN-R/6SK 19 MBB-1 15 YBN-UA 40 MBF-6EV 21 YBO-BS 6 MCP1A 14 YBO-BS/SIL 28 MTL7728+ 24 YBO-BSB2 6 MTL7787+ 24 YB0-BSB2/SIL 28 PL-2 43 YBO-R/6PA 18 PL-3 43 YBO-R/6R 18 PS200 10 YBO-R/6RN 18 REMOVAL TOOL 43 YBO-R/6RS 19 REPLACEMENT BATTERIES 36 YBO-R/SCIM 13 RHD-E 35 Z728 24 RMD-E 35 Z787 24 ROD-E 35 RSM-BS 36

Hochiki Europe (UK) Ltd reserves the right to alter the specification of its products from time to time without notice. Although every effort has been made to ensure the accuracy of the information contained in this document it is not warranted or represented by Hochiki Europe (UK) Ltd to be a complete and up-to-date description.

NOTES

________________________________________

________________________________________ 51

Grosvenor Road, Gillingham Business Park, Gillingham, Kent, ME8 0SA, United Kingdom Telephone: +44 (0)1634 260133 Facsimile: +44 (0)1634 260132 e-mail (UK Sales): sales@hochikieurope.com e-mail (Non UK Sales): export@hochikieurope.com www.hochikieurope.com Reg. Address: 11 Raven Wharf, Lafone Street, Butlers Wharf, London SE1 2LR Registered in England no. 2639909 VAT no. GB 573 8188 03 9-5-0-321/ISS18/JAN 17

Quality Systems Certificate No.164 Assessed to ISO 9001

Environmental Management Certificate No. EMS 286 Assessed to ISO 14001

Business Member

Affiliate Member

Your Safety, Our Technology

HOCHIKI EUROPE (UK) LIMITED