saar
Cantilever Racking
Cantilever racking with patented locking wedge The patented system from Sipag with the special double locking wedge has several benefits. Through the double locking wedge, the cantilever arms are positively and immovably positioned. The cantilever arms are interlocked with the uprights by the specially hardened locking wedges. Furthermore, the wedge lock distributes the pressure, increasing safety, durability and stability. Standard parts are available in single or back-to-back versions. Thanks to the patented locking wedge technique, the racking is free-standing and needs neither wall nor ceiling fixation. Both sides of the rack can be independently adjusted in increments of 76mm.
2
Unloaded condition Loaded condition
Clear aisle width remains constant even under extreme loading conditions
In the Sipag System, the uprights taper towards the top, a construction that rectifies the deflection when the frame is only loaded on one side or when the uprights are not loaded uniformly. This results in safe, efficient operation because the distance between the cantilever arms remains constant so that there is no danger due to aisle widths altering. Individual, computer-controlled
calculations make it possible to have uprights up to 12m high and cantilever arms up to 3m long. Cantilever racking is constructed for extreme loads, e.g. for the metal industry. Loads of 280kN (4.3to) on each cantilever arm can be achieved, depending on the centre of gravity of the load. Every structure is calculated with a safety factor of at least 1.5 (on the yield stress of the steel), thus outperforming the demands of any standard.
Load
The patented Sipag System Optimum pressure distribution in the connection between arm/frame and double wedge
3
saar Cantilever Racing in different Variations
The patented system is suitable for all requirements. The module construction system has a cantilever rack for every type of
long, cumbersome goods. Single sided racking can be retrofitted to form a back-to-back rack.
4
5
saar Head Office Saar Lagertechnik GmbH Wiesenweg 2b D-65812 Bad Soden am Taunus
phone fax web email
+49 (0) 6196 / 5605-50 +49 (0) 6196 / 5605-99 www.saar-lagertechnik.com info@saar-lagertechnik.com
Branch Office Germany West Dipl.-Ing. Gereon Fleck TechnologiePark / Friedrich-Ebert-Strasse D-51429 Bergisch-Gladbach
phone +49 (0) 2204 / 84-2386 fax +49 (0) 2204 / 84-2389 email gf@saar-lagertechnik.com
Branch Office Great Britain Chris Adams phone +44 (0) 1604 470297 mobile +44 (0) 7528 167687 email ca@saar-lagertechnik.com
Branch Office Germany South and Austria Karl Huber MildenbergstraĂ&#x;e 2b/10 A-6900 Bregenz
phone +43 (0) 5574 / 23267 fax +43 (0) 5574 / 23267 email kh@saar-lagertechnik.com
Branch Office Germany East Dieter Krailing Gewerbegebiet Zur Aue 1 D-99330 Crawinkel
phone +49 (0) 3624 / 40890-30 +49 (0) 3624 / 40890-33 fax email dk@saar-lagertechnik.com
Central Warehouse Ulrich Ruf Gewerbegebiet Zur Aue 1 D-99330 Crawinkel
phone +49 (0) 3624 / 40890-38 +49 (0) 3624 / 40890-39 fax email lager@saar-lagertechnik.com