saar
EURO Shelving
EURO Shelving
Louvred Panels To carry plastic containers and spigots. These panels are suitable for frame heights of 1800mm and 2100mm high and frame widths of 300mm, 400mm and 500mm. .
Rear Cladding Made of sheet steel, perforated or unperforated or mesh and available for all frame sizes. Shelf Dividers (full height) Available in four different heights
Garment hanging Single or double coat hangers (for frame depths up to 750 mm) with clips Plastic End Caps for Frame Uprights Cupboard Doors (full height)
Perforated steel frames
Cupboard Doors (part height) Floor Trim Shelf front
Angled Bin Front Plastic Containers Available in six different sizes and four colours. These containers made of durable plastic are ideal for storing small parts.
2
Easy-glide wide Steel Drawers Available in three depths – 100mm,, 150mm and 200mm – and dividable in both directions. These steel drawer units can be pulled out to their fullest extent and combine high storage capacity with quick access..
Central Hanging Files To accommodate files and documents Plastic Drawers Light grey or graphite brown and in three sizes with dividers to form internal compartments, providing clearly arranged storage for small items.
saar EURO Shelving EURO Shelving is a clip-together shelving system that can be used in an almost limitless variety of applications. It has a wide selection of standard parts that can be used in all branches of industry and commerce, whether a single bay is needed or a high-rise installation up to 15m. The concept and stability fulfil the high demands of the ISO 9001 standard, guaranteeing lasting quality whether EURO Shelving is used whether it be office shelving, high-rise racking, multi-tier storage platforms, narrow aisle installation or mobile shelving.
In addition there is a wide range of accessories – from plastic containers and drawer units for small parts storage through to full or half-height cupboard doors. EURO Shelving can help you find a solution to your storage problems. With uprights in four different colours, graphite grey, EURO green, Suave blue or rich burgundy red and shelves and accessories in light grey EURO Shelving offers an attractive addition to the workplace, whether it be an office or a warehouse.
3
Frames, shelves and accessories Frames
Open frames
Uprights
50 mm
Diagonally braced frames
45 mm
Frames with perforated panels
50 mm
50 mm
50 mm
Standard 0.75 mm steel gauge
Clad frames
50 mm
55 mm
50 mm
50 mm
Heavy 1.15 mm gauge
Extra Heavy 1.2 mm gauge
Foot Plates
Standard / Heavy, single and double Foot plate sizes All single uprights = width 70mm, depth 76mm All double uprights = width 70mm, depth 110mm
4
Extra Heavy, single and double Material - Standard/Heavy - Steel 2mm gauge, Extra Heavy - 2mm gauge with 4mm steel base plate Finish – galvanised and passivated
Features – available for singe and double uprights Advantages – easy to install they offer lateral support for the uprights and protection for the floor
saar Shelves Unpierced shelves, depths only 750mm and 900mm
Pierced shelves, depths up to 600mm
saar lagertechnik
width mm
depth mm 40 mm
Shelf widths - 900, 1000 and 1200mm Specifications – Standard duty, Heavy duty and Extra Heavy duty
Shelf depths - 300, 400, 450, 500, 600, 750 and 900 mm
Shelf locking clips
Material - aluminium extrusion Benefits – makes shelves easily adjustable, forms shelves and
frames into an integral unit and prevents accidental shelf dislodgement.
Disc clamp brace Bolt for tensioning
Cut Single bay
upright
brace Back to back racking brace
upright
nut and bolt
Features - clips into rear uprights and is tensioned by a tensioning bolt to provide rear bracing 5
Wide range of accessories makes EURO Shelving a multi-purpose storage system Upright caps
Features – locate in top of uprights to provide capping for safety and appearance. The upright caps are flush with top. For use on all perimeter uprights.
Floor trim
Rear cladding kits
Clad frames
solid
solid
perforated
perforated
filling strips
filling strips
Features – clips, bolts or rivets to uprights to provide rear cladding. A clean joint between the steel cladding sheets is achieved by use of a steel filler strip. Supplied complete with all fixings.
Bin front
Finish – painted light grey
Angled bin front
Height
113 mm
Rolled edge ensures safety
50
85 mm
Rack
Bin Front
Floor trim
Part height dividers
150 mm
Finish – painted light grey Benefits – produces good appearance and prevents dust and debris accumulating under the rack
Rack
Height - 50 and 100mm Finish – painted light grey Benefits – turns floor into „bin“ for quick, safe order picking
Height - 200, 250, 300, 400, 450 and 600mm Finish – light grey Features – locates between shelf levels to provide sub.divisions in increments of 75mm Benefits – increases flexibility. Is easy to fit and adjust
Full height dividers
Locating plug divider height Divider Rack
Finish – light grey 6
Benefits – turns shelf into „bin“ for quick, safe order picking
Divider Rack
saar Drawer kits
Louvred panels
Height - 100, 150 and 200mm Features – Telescopic slides dividers and liners available Benefits - 100% accessibility for small paarts storage in 600, 500 and 450mm wide bays
Shelf infill panels
Features – all panels manufactured from mild steel and painted light grey. Permit plastic containers to be located at ends of shelf runs.
Rear mesh panel kits
bracket
plastic tie
Features – fill gaps between backs of shelves in back to back and spine clad installations Benefits - secures small parts stored
full height
1110 mm
2100 mm
Door configurations
part height
Material - 50mm welded mesh (3mm diameter wire) Features – clips or bolts to rear of bay. Mesh has heavy gauge frame eliminating sharp wire ends Benefits – offers goods retension with a minimum of installation time. Rear mesh kits must fitted with Disc Clamp bracing
Finish – painted light grey Features – flush doors with 3-point locking system Benefits – provides a secure storage cupboard 7
saar Head Office Saar Lagertechnik GmbH Wiesenweg 2b D-65812 Bad Soden am Taunus
phone fax web email
+49 (0) 6196 / 5605-50 +49 (0) 6196 / 5605-99 www.saar-lagertechnik.com info@saar-lagertechnik.com
Branch Office Germany West Dipl.-Ing. Gereon Fleck TechnologiePark / Friedrich-Ebert-Strasse D-51429 Bergisch-Gladbach
phone +49 (0) 2204 / 84-2386 fax +49 (0) 2204 / 84-2389 email gf@saar-lagertechnik.com
Branch Office Great Britain Chris Adams phone +44 (0) 1604 470297 mobile +44 (0) 7528 167687 email ca@saar-lagertechnik.com
Branch Office Germany South and Austria Karl Huber MildenbergstraĂ&#x;e 2b/10 A-6900 Bregenz
phone +43 (0) 5574 / 23267 fax +43 (0) 5574 / 23267 email kh@saar-lagertechnik.com
Branch Office Germany East Dieter Krailing Gewerbegebiet Zur Aue 1 D-99330 Crawinkel
phone +49 (0) 3624 / 40890-30 +49 (0) 3624 / 40890-33 fax email dk@saar-lagertechnik.com
Central Warehouse Ulrich Ruf Gewerbegebiet Zur Aue 1 D-99330 Crawinkel
phone +49 (0) 3624 / 40890-38 +49 (0) 3624 / 40890-39 fax email lager@saar-lagertechnik.com