Design by for
(OFFICE USE ONLY)
CITY OF PALO ALTO
PERMIT #:
REC'D DATE:
REC'D BY:
ISSUED DATE:
ISSUED BY:
DEVELOPMENT SERVICES 285 Hamilton Ave. Palo Alto, CA 94301 (650) 329-2496
BUILDING PERMIT APPLICATION
PLEASE PRINT CLEARLY PROJECT ADDRESS:
724 Bryant St. Palo Alto California 94301
PROPERTY OWNER NAME: ADDRESS: CITY:
☐ APPLICANT
PHONE: EMAIL:
NAME:
Joette Farrand
ADDRESS:
3490 Bean Creek Rd. Scotts Valley
ARCHITECT/DESIGNER/ENGINEER
ST:
CA
ZIP:
CITY:
95066
PHONE:
831-431-6600
EMAIL:
joette.farrand@gmail.com
CONTRACTOR- LICENSE #:
☐ APPLICANT
NAME:
ADDRESS:
ADDRESS: ST:
ZIP:
PHONE:
EMAIL:
EMAIL:
DESCRIPTION OF WORK:
3490 Bean Creek Rd. Scotts Valley
ST:
ZIP:
CA
95066
650-576-3334
producer@thelastliberty.com
CITY:
PHONE:
CONSTRUCTION COST (LABOR AND MATERIALS ONLY):
Robert Ferrand
TENANT /OTHER
NAME:
CITY:
☐ APPLICANT
☐ APPLICANT
ST:
ZIP:
Labor in Months Cost $5,500+
A completely UL Compliant COB LED Lighting system consisting of 2 Circuits. One 15 amp.
circuit consisting of (1.) 120V Surge Suppressor. (2) 2 - 350-watt Power Supplies, (3) 2 - RF Dimmer
Switches that illumenates the Living Room and Dining Room with 114 linear feet of COB LED strip lights,
secure to aluminum channel on the Picture Molding. A second 12 AMP system illuminate the Kitchen. PLEASE FILL IN THE SQUARE FOOTAGES OF AREAS THAT APPLY: ADDITION (SF):
AREA OF REMODEL (SF):
(N) STRUCTURE (SF):
(N) GARAGE (SF):
(N) BASEMENT (SF):
CHECK ALL THAT APPLY: ☐ (N) RES. STRUCTURE
☐ (N) COMM. STRUCTURE
☐ RE-ROOF (ONE STRUCTURE)
☐ DEMO OF ENTIRE STRUCTURE
☐ RES. ADDITION
☐ COMM. ADDITION
☐ MECH/ELEC/PLUMB ONLY
☐ COMM. INT. NON-STRUCT. DEMO
☐ RES. REMODEL
☐ COMM. REMODEL
☐ PV/ELEC. CAR CHARGER
☐ POOL/SPA [NEW OR DEMO]
- PLEASE COMPLETE BOTH SIDES -
PROPERTY INFORMATION:
ELECTRICAL WORK:
■ IS PROPERTY IN THE FLOOD ZONE? ☐YES ☐NO DESIGNATION
AREA OF ELECTRIC WORK (SF) COB LED Lighting
IS PROPERTY HISTORIC?
SERVICE UPGRADE? AMPS OTHER:
☐YES ☐NO
■ ☐4 CATEGORY: ☐1 ☐2 ☐3
TOTAL NO. OF STRUCTURES ON PROPERTY 2
LIVING UNITS
IS THERE AN EXISTING BASEMENT? ☐YES ☐NO CONDITIONED? ☐YES ☐NO EXISTING GARAGE OR CARPORT: ☐ ATTACHED ☐ DETACHED ☐ NONE RE-ROOF PERMIT INFORMATION: NO. OF SQUARES FIRE CLASSIFICATION: ☐ A ☐ B ☐ C ☐ NONE
■ RELOCATED? ☐YES ☐NO
PLUMBING WORK: AREA OF PLUMBING WORK (SF) WATER/GAS METER RELOCATION OR UPGRADE? ☐ YES
☐NO
WATER HEATER REPLACEMENT
☐YES ☐NO
TANKLESS?
WATER/SEWER REPLACEMENT?
☐YES ☐NO
TRENCHLESS? ☐ YES ☐NO
APPLIED WEIGHT OF ROOFING MATERIAL PER SQUARE FOOT
NEW GAS APPLIANCES? ☐YES
☐NO
WILL ALL EXISTING ROOF COVERING BE REMOVED? ☐ YES ☐ NO
OTHER:
NEW ROOFING MATERIAL:
WILL NEW SHEATING BE ADDED:
☐YES
GAS LEAK REPAIR?
☐ YES ☐NO
☐ YES ☐NO
☐NO
COMMERCIAL REQUIREMENTS:
MECHANICAL WORK: AREA OF MECHANICAL WORK (SF)
TENANT NAME:
HVAC EQUIPMENT? ☐YES ☐NO
ROOF TOP? ☐YES ☐NO
IS THIS A NEW TENANT? ☐YES ☐ NO FLOOR/SUITE #
FURNACE REPLACE/RELOCATE? ☐ YES ☐ NO
NO. OF DUCTS
CO. HEALTH DEPARTMENT APPROVAL REQUIRED?
☐YES
☐NO
OTHER:
LICENSED CONTRACTORS DECLARATION
WORKERS’ COMPENSATION DECLARATION
I hereby affirm under penalty of perjury that I am licensed under provisions of Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code, and my license is in full force and effect. License Class: License Number: Date: Contractor:
I hereby affirm under penalty of perjury one of the following declarations: I have and will maintain a certificate of consent to self-insure for workers’ compensation, as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued.
OWNER-BUILDER DECLARATION I hereby affirm under penalty of perjury that I am exempt from the Contractors License Law for the following reason (Sec. 7031.5, Business and Professions Code: Any city or county which requires a permit to construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for such permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractors License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code) or that he or she is exempt therefrom and the basis for the alleged exemption. Any violation of Section 7031.5 by any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars ($500). I, as owner of the property, or my employees with wages as their sole compensation, will do the work, and the structure is not intended or offered for sale (Sec. 7044, Business and Professions code: The Contractors License Law does not apply to an owner of property who builds or improves thereon, and who does such work himself or herself or through his or her own employees, provided that such improvements are not intended or offered for sale. If, however, the building or improvement is sold within one year of completion, the owner-builder will have the burden of proving that he or she did not build or improve for the purpose of sale). I, as owner of the property, am exclusively contracting with licensed contractors to construct the project (Sec. 7044, Business and Professions Code. The Contractors License Law does not apply to an owner of property who builds or improves thereon, and who contracts for such projects with a contractor(s) licensed pursuant to the Contractors License Law), I am exempt under Sec.
Date
, B&P C for this reason:
Owner
I have and will maintain workers’ compensation insurance, as required by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. My workers’ compensation insurance carrier and policy number are: Carrier: Policy No: (This section need not be completed if the permit is for one hundred dollars ($100) or less). I certify that in the performance of the work for which this permit is issued, I shall not employ any person in any manner to become subject to the workers’ compensation laws of California and agree that if I should become just to the workers compensation provisions of Section 3700 of the Labor Code, I shall forthwith comply with those provisions. Date:
Applicant:
CONSTRUCTION LENDING AGENCY I hereby affirm under penalty of perjury that there is a construction lending agency for the performance of the work for which this permit is issued (Sec. 3097, Civ. C). Lender’s Name: Lender’s Address: I certify that I have read this application and state that the above information is correct. I agree to comply with all city and county ordinances and state laws relating to building construction, and hereby authorize representatives of this county to enter upon the abovementioned property for inspection purposes. Signature of Applicant or Agent
Date
14.
Decks not exceeding 200 square feet in area, that are not more than 30 inches above grade at ant point, are not attached to a dwelling and do not serve the exit door required by section R311.4.
CBC ELECTRICAL: Repairs and maintenance: Minor repair work, including the replacement of lamps or the connection of approved portable electrical equipment to approved permanently installed receptacles. Radio and television transmitting stations: The provisions of this code shall not apply to electrical equipment used for radio and television transmissions, but do apply to equipment and wiring for a power supply and the installations of towers and antennas. Temporary testing systems: A permit shall not be required for the installation of any temporary system required for the testing or servicing of electrical equipment or apparatus. CRC ELECTRICAL: 1. Listed cord-and-plug connected temporary decorative lighting. 2. Reinstallation of attachment plugs receptacles but not the outlets therefore. 3. Replacement of branch circuit overcurrent devices of the required capacity in the same location. 4. electrical wiring, devices, appliances, apparatus or equipment operating at less than 25 volts and not capable of supplying more than 50 watts of energy. 5. Minor repair work, including the replacement of lamps or the connection of approved potable electrical equipment to approved permanently installed receptacles. GAS: 1. Portable heating appliance. 2. Replacement of any minor part that does not alter approval of equipment or make such equipment unsafe. 3. portable-fuel-cell appliances that are not connected to a fixed piping system and are not interconnected to a power grid. MECHANICAL: 1. Portable heating appliance. 2. Portable ventilation equipment. 3. Portable cooling unit. 4. Steam, hot or chilled water piping within any heating or cooling equipment regulated by this code. 5. Replacement of any part that does not alter its approval or make it unsafe. 6. Portable evaporative cooler. 7. Self-contained refrigeration system containing 10 pounds or less of refrigerant and actuated by motors of 1 horsepower or less. 8. portable-fuel-cell appliances that are not connected to a fixed piping system and are not interconnected to a power grid. PLUMBING: 1. The stopping of leaks in drains, water, soil, waste or vent pipe, provided, however, that if any concealed trap, drain pipe, water, soil, waste or vent pipes become defective and it becomes necessary to remove and replace the same with the new material, such work shall be considered as new work and a permit shall be obtained and inspection made as provided in this code. 2. The clearing of stoppages or the repairing of leaks in pipes, valves or fixtures and the removal and reinstallation of water closets, provided such repairs do not involve or require the replacement or rearrangement of valves, pipes or fixtures.
What Where When and How Stanford University was founded in 1885. 20 years later and less than a half a mile away, 724 Bryant St was built in 1906, beside an ancient redwood tree. 50 years later, Joette Farrand, bought 724 Bryant St. in 1975. She moved in and began restoration of this historic house. Another 50 years later, Joette has decided to sell 724 Bryant St. Three blocks from Stanford University and two blocks from University Ave. This is house is the poster child for Location, Location, Location. The ancient redwood tree in the front yard shades the front of the house. Since the house was built in 1906, over 100 years old, the rooms tend to be dark. Recently, a stream of Real Estate Agents began circling offering opinions of how to present the house to get the listing. The modern solution is "Paint it White'. The expert "Decorators" proceeded to explain why the beautiful traditional wall paper should be “painted white” to "make it brighter". Of course, the beautiful wood kitchen cabinets that Joette has personally refinished were also to be painted white. Suggesting that the antique checkerboard wallpaper in the kitchen was to be painted white was the last straw. Robert Ferrand, Joette Farrand’s partner, with over a dozen patents to his name, saw there was an alternative to “white paint”: LED lighting. Robert saw that the “picture frame” molding, that has been in place for a century, on the perimeter of every room, provided a perfect place for the LED light strips to illuminate the ceiling and make every room significantly “brighter”. Further, Joette had made lovely fabric panels that were secured behind the glass of the kitchen cabinet doors. Robert saw the opportunity to light this fabric, top and bottom, with short LED strip lights to create an enchanting effect and transform the Kitchen. This LED system will brighten the house, without destroying the historic charm of THIS OLD HOUSE with white paint. This COB LED Lighting System consists of 2 Circuits. One 15 Amp circuit consists of 1. 120V Surge Suppressor, 2. 2 – 350-Watt Power Supplies, 3. 2 – RF Dimmer Switches that illuminates the Living Room and Dining Room with 114 linear feet of COB LED strip lights. The second 12 AMP circuit has the same hardware that illuminates the Kitchen with another 88 linear feet of COB LED strip lights. Both circuits are controlled through a RF to Wi-Fi Converter that can use any Wi-Fi interface such as Goggle Home. "Alexa, turn on the Living Room Lights." ALL COMPONENTS HAVE UL Certificate of Compliance, Listing or Registration.
VOICE ACTIVATED TURBO CHARGED
COB LED LIGHTING SYSTEM WITH INTELLIGENCE
UL SAFETY COMPLIANCE MAJOR COMPONENTS HAVE UL CERTIFICATE OF COMPLIANCE MINOR COMPONENTS ARE UL LISTED OR UL REGISTERED NO POWER SUPPLY OPERATING ABOVE 65% OF RATING NO 24VDC COB LED STRIP LONGER THAN 28 FEET NO SINGLE LED STRIP GREATER THAN 85 WATTS NO SINGLE STRIP AMPERAGE GREATER THAN 5 AMPS 14 AWG COLOR CODED WIRE THROUGH OUT OVER / UNDER VOLTAGE PROTECTION ALL 24 VDC CONNECTIONS ARE FERRULE/SCREW TERMINALS ¾ x 2 SQ. FT. HEAT SINKS TO LOWER TEMPERATURE REDUNDANT THERMOSTAT & COOLING FANS BACK UP PARTS FOR ALL COMPONENTS COLOR CODING PERMITS EASIER MAINTENANCE
COB LED Strip Lights Basic Wiring Diagram
4 SURGE SUPPRESSOR
COB LED LIGHTING SCHEMATIC DIAGRAM
POC: Robert Ferrand 650-576-3334 producer@thelastliberty.com
RF/WIFI
RF DIMMER #1
BLU/BLK
OUTPUT
LIVINGROOM
V+ V+ 11 22 33 44
GRN/BLK
L1 L2
7 AMP L GR N
15 AMP
SURGE SUPPRESSOR
20 AMP
8 AMP
724 BRYANT ST
RF DIMMER #2
ORG/BLK
OUTPUT
DININGROOM
V+ 5 6 7 8
PRP/BLK BRW/BLK
RF DIMMER #2
RF DIMMER #3
L THERMOSTAT SURGE SUthermddoR N
OUTPUT
KITCHEN # 1
D1 D2 D3
V+ 9 10 11 12
BRW/BLK BLU/BLK GRN/BLK
K1 K2 K3
6 AMP L GR N
12 AMP
SURGE SUPPRESSOR
20 AMP
6 AMP
RF DIMMER #4
OUTPUT
KITCHEN # 2
V+ 13 14 15 16
PRP/BLK ORG/BLK
RF DIMMER #4
PRP/BLK
K4 K5
COB LED Strip Lights Power Distribution
Dining room
Front Livingroom L1
L2
Remote RF Dimmer 24DCV in / 2 24DCv out
D1
D3
D2
Remote RF Dimmer 24DCV in / 2 24DCv out
K1
K2
120V AC 15 AMP
K3
K4
Remote RF Dimmer 24DCV in / 2 24DCv out
24V DC 15 AMP
24V DC 15 AMP 120V AC 15 AMP
Kitchen
24V DC 15 AMP 120V AC 15 AMP
Remote RF Dimmer 24DCV in / 2 24DCv out
24V DC 15 AMP 120V AC 15 AMP
1
2
3
4
L1 / 75W 4A
D1 / 75W 4A
K1 / 42W 2.2A
K4 / 54W 2.8A
L2 / 84W 4.4A
D2 / 54W 3A
K2 / 42W 2.2A
K5 / 84W 4.4A
SPARE
D3 / 54W 3A
K3 / 64W 2.7A
SPARE
57% Rating
65% Rating
45% Rating
50% Rating
159 W / 9 A
183 W / 10 A
350 W / 15 A
350 W / 15 A
126 W / 7 A 350 W / 15 A
K5
138 W / 7 A 350 W / 15 A
724 BRYANT ST COB LED LIGHTING
Upper Doors
OHMS LAW POWER CALCULATION
K1 / Z9
14’
10” 45 0
L2
90
450
D2 / Z6
75Wt/3.9A LD 4’+22’/LED 12’ +12’
L2 / Z3
45
450
Driveway / Library
Driveway / Dining 0
K1
D2
K2
GRN/BLK
52’ L/FT LED
84Wt/4.4A LD21’/LED 28’
60’ L/FT
10’
6’ Front / Entry
17.5’
4’
0
45
900
10”
L1
Load 57% of Rating
14’
Load 65% of Rating
Garden
Bryant
PRP/BLK
Load 67% of Rating
K5
54Wt/2.8A LD5’/LED 18’
54Wt/2.8A LD12’/LED 18’
12’
D1/D2/D3
68Wt/2.8A LD8’/LED16’
1 / 350-Watt UL Power Supply
BRW/BLK
ORG/BLK
900
6’
D3 / Z7
D1 / Z5
900
K1 K2 K3 K4 K5
K4
K4 / Z13
42Wt/2.2 A LD8’/LED16’
D3
53 ” 8’
Toe Kick
GRN/BLK
L1/L2 900
92’ L/FT LED
K3 / Z11
1 / 350-Watt UL Power Supply
26” 68 ”
26”
Counter
D1
1 / 350-Watt UL Power Supply
32”
K3
L1 / Z2
75W/3.9A LD 21/LED 28
96”
53”
17.5’
BLU/BLK
450
53Wt/2.2A LD10’/LED16’
12’
4’
PRP/BLK
4’
BLU/BLK
53Wt/2.2A LD10’/LED16’
300
5’
4’ 0
K2 / Z10
BRW/BLK
300
900
Lower Doors
Library / Nook
10’
K5 / Z14 ORG/BLK
84Wt/4.4A LD7’/28LED 28’ 900
11’8”
900
45’ UL Power Supply UL Dimmer
UL SAFETY COMPLIANCE MAJOR COMPONENTS HAVE UL CERTIFICATE OF COMPLIANCE MINOR COMPONENTS ARE UL LISTED OR UL REGISTERED NO POWER SUPPLY OPERATING ABOVE 65% OF RATING NO 24VDC COB LED STRIP LONGER THAN 28 FEET NO SINGLE LED STRIP GREATER THAN 85 WATTS NO SINGLE STRIP AMPERAGE GREATER THAN 5 AMPS 14 AWG COLOR CODED WIRE THROUGH OUT OVER / UNDER VOLTAGE PROTECTION ALL 24 VDC CONNECTIONS ARE FERRULE/SCREW TERMINALS ¾ x 2 SQ. FT. HEAT SINKS TO LOWER TEMPERATURE REDUNDANT THERMOSTAT & COOLING FANS BACK UP PARTS FOR ALL COMPONENTS COLOR CODING PERMITS EASIER MAINTENANCE
VOICE ACTIVATED TURBO CHARGED
COB LED LIGHTING SYSTEM WITH INTELLIGENCE DESIGN BY ROBERT FERRAND FOR JOETTE FARRAND
CONTACT ROBERT FERRAND 650-576-3334 producer@thelastliberty.com
Dining Room
Living Room
Kitchen
724 BRYANT ST COB LED LIGHTING SYSTEM
OHMS LAW CALCULATIONS
COB LED Strip Lights Power Distribution
Dining room
Front Livingroom L1
L2
Remote RF Dimmer 24DCV in / 2 24DCv out
D1
D3
D2
Remote RF Dimmer 24DCV in / 2 24DCv out
K1
K2
120V AC 15 AMP
K3
K4
Remote RF Dimmer 24DCV in / 2 24DCv out
24V DC 15 AMP
24V DC 15 AMP 120V AC 15 AMP
Kitchen
24V DC 15 AMP 120V AC 15 AMP
Remote RF Dimmer 24DCV in / 2 24DCv out
24V DC 15 AMP 120V AC 15 AMP
1
2
3
4
L1 / 75W 4A
D1 / 75W 4A
K1 / 42W 2.2A
K4 / 54W 2.8A
L2 / 84W 4.4A
D2 / 54W 3A
K2 / 42W 2.2A
K5 / 84W 4.4A
SPARE
D3 / 54W 3A
K3 / 64W 2.7A
SPARE
57% Rating
65% Rating
45% Rating
50% Rating
159 W / 9 A
183 W / 10 A
126 W / 7 A
138 W / 7 A
350 W / 15 A
350 W / 15 A
350 W / 15 A
K5
350 W / 15 A
COB LED Strip Lights Basic Wiring Diagram
09.009EA.04011
Wiring Diagram
V-
Important: Read All Instructions Prior to Installation
INPUT
V+
OUTPUT
Universal series RF Receiver
12V/24V/36V CV PSU
L AC Power 50/60Hz
N G
Function introduction V+
Learning Switch
RF Controller
CH 2:G/CW output(-)
B-
CH 3:B/WW output(-)
CH1
2
3
V+
CH 4:W/CW output(-)
4
12/36VDC
CH 1:R/WW output(-)
G-
DC INPUT
R-
W-
Learning Switch
GBW-
GBW-
If Connect with RGBW LED Strip
B-
3
RF Controller
Learning Switch
234-
VVV-
V+ WW CW
V+ WW CW
WW CW
WW CW
If Connect with Single Color LED Strip
G2
B-
3
Constant voltage
Size(LxWxH) 6.69"x2.32"x1.14"H
RF Controller
Radio Frequency : 868/915/434mhz Waterproof grade: IP20
Safety & Warnings
CH1
G2
B-
3
W4
If you use multiple receivers, you have two choices: Option 1: have all the receivers in the same zone, like zone 1 RF Controller
V+
V+
R-
V-
CH1
12/36VDC
Learning Switch
DC INPUT
12/36VDC
V+ V-
DC INPUT
• DO NOT install with power applied to device. • DO NOT expose the device to moisture.
If Connect with Dual Color LED Strip
R-
Learning Switch
G2
V+
RF Controller
B-
3
OUTPUT SIGNAL
Remarks
OUTPUT SIGNAL
4x(96-288)W
V+ V-
CH1
V+ OUTPUT SIGNAL
12/36VDC
DC INPUT
V-
Output Power
V+ 1-
R-
4
V+
4x8A
V+ R-
W-
Product Data
12-36VDC
V+ R-
2
V+
Master/Slave Learning Key: jumper Paring with RF remote
Output Current
CH1
G-
4
V-
Input Voltage
R-
W-
OUTPUT SIGNAL
Learning Switch
Common Anode Output(+)
V+ OUTPUT SIGNAL
12/36VDC
V-
DC INPUT
V+
RF Controller
OUTPUT SIGNAL
12/36VDC
V-
DC INPUT
V+
DC Power input
W-
RCH1
G2
B-
3
W-
4
4
Operation RF remote
2
Learning Switch
RF Controller
3
W-
V-
CH1
G2
Learning Switch
RF Controller
B-
3
W-
4
Zone 1
R-
V+ RCH1
G2
B-
3
W-
4
Zone 2
OUTPUT SIGNAL
V-
CH1
GB-
OUTPUT SIGNAL
OUTPUT SIGNAL
R-
V+
12/36VDC
RF Controller
V+
DC INPUT
Learning Switch
V+
12/36VDC
V-
V+
DC INPUT
MASTER/SLAVE jumper: In a group of multiple receivers, in order to get a good sync of RGB running effect, please set only 1 receiver as MASTER, the other receivers as SLAVE. After setting the Master, the Master receiver need to power off and on once to make the Master function take effect.
V+
12/36VDC
Delete the pairing: 1. Wire up the RF receiver correctly, power on. 2. Hold down the “ Learning Key” button on receiver for over 3 seconds until the connected led light on receiver flickers twice, which means well deleted.
RF remote
Option 2: have each receiver in a different zone, like zone 1, 2, 3 or 4 DC INPUT
Do wiring according to connection diagram. Pair RF Receiver with RF remote: 1. Connect and wire up the RF receiver correctly, power on. 2. Turn on the remote, click the “Learning Key” button on receiver, immediately click a zone number to pair the receiver to the specified zone if the remote is a multi-zone controller (if it is a single zone remote, this step is unnecessary), then touch the color wheel or slider bar on the remote (if the remote does not have color wheel or slider bar, click or touch any keys), the connected led light on receiver flickers twice, which means well paired. Note: one receiver can be paired with max 8 remote controls.
Zone 1
4
Zone 3
Voice Actuated Turbo Charged LED Lighting System with Intelligence.
Full Power Temperature over Time Test 2 150 V Surge Suppressors
RF – WIFI Transformer
4 / Cooling Fans
Thermostat
4 / 350 Watts Power Supplies
4 / RF Dimmers Control
All Circuits Color Coded
Product Data Sheet: DEHNrail modular DR M 2P 150 FM (953 209) ■ Two-pole surge arrester consisting of a base part and a plug-in protection module ■ High discharge capacity due to heavy-duty zinc oxide varistor / spark gap combination ■ Energy coordination with other arresters of the Red/Line product family
Figure without obligation
Basic circuit diagram DR M 2P 150 FM
Dimension drawing DR M 2P 150 FM
Two-pole surge arrester consisting of a base part and a plug-in protection module; with floating remote signalling contact. Type Part No. SPD according to EN 61643-11 / IEC 61643-11
DR M 2P 150 FM 953 209 type 3 / class III
Nominal voltage (a.c.) (UN)
120 V (50 / 60 Hz)
Max. continuous operating voltage (a.c.) (UC)
150 V (50 / 60 Hz)
Max. continuous operating voltage (d.c.) (UC)
150 V
Nominal load current (a.c.) (IL)
25 A
Nominal discharge current (8/20 µs) (In)
2 kA
Total discharge current (8/20 µs) [L+N-PE] (Itotal)
4 kA
Combination wave (UOC)
4 kV
Combination wave [L+N-PE] (UOC total)
8 kV
Voltage protection level [L-N] / [L/N-PE] (UP)
≤ 640 / ≤ 800 V
Response time [L-N] (tA)
≤ 25 ns
Response time [L/N-PE] (tA)
≤ 100 ns
Max. mains-side overcurrent protection
25 A gG or B 25 A
Short-circuit withstand capability for mains-side overcurrent protection with 25 A gG (ISCCR)
6 kArms
Operating temperature range (TU)
-40 °C ... +80 °C
Operating state / fault indication
green / red
Number of ports
1 2
Cross-sectional area (min.)
0.5 mm solid / flexible
Cross-sectional area (max.)
4 mm solid / 2.5 mm flexible
2
2
For mounting on
35 mm DIN rails acc. to EN 60715
Enclosure material
thermoplastic, red, UL 94 V-0
Place of installation
indoor installation
Degree of protection
IP 20
Capacity
1 module(s), DIN 43880
Approvals
KEMA, VDE, UL, CSA
Type of remote signalling contact
changeover contact
Switching capacity (a.c.)
250 V / 0.5 A
Switching capacity (d.c.)
250 V / 0.1 A; 125 V / 0.2 A; 75 V / 0.5 A
Cross-sectional area for remote signalling terminals Weight
2
max. 1.5 mm solid / flexible 82 g
Customs tariff number (Comb. Nomenclature EU)
85363030
GTIN
4013364109742
PU
1 pc(s)
We reserve the right to introduce changes in performance, configuration and technology, dimensions, weights and materials in the course of technical progress. The figures are shown without obligation.
© DEHN + SÖHNE GmbH + Co. KG · Hans-Dehn-Str. 1 · Postfach 1640 · D-92306 Neumarkt · Tel. +499181 906-0 · www.dehn.de 3,
te
s ted
: Tested +: New (: Discontinued Model
350W Single Output Switching Power Supply
AC/DC Power Supply • 350W MEAN WELL LRS-350 Series
L R S - 3 5 0 series
IS 13252(Part 1):2010/ IEC 60950-1:2005
R-41179035
AS/NZS62368-1
TP TC004
IEC62368-1
UL62368-1
(Note.9)
■ ‧ ‧ ‧
‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧℃ ‧O altitude up to 5000 meters (Note.8) ‧ ‧
■ ‧ ‧ ‧ ‧
■ ℃
■
TRC ELECTRONICS, INC. 1.888.612.9514
File Name:LRS-350-SPEC 2022-08-05
www.trcelectronics.com
AC/DC Power Supply • 350W MEAN WELL LRS-350 Series
L R S - 3 5 0 series
350W Single Output Switching Power Supply SPECIFICATION MODEL
OUTPUT
INPUT
LRS-350-3.3
LRS-350-4.2 LRS-350-5
DC VOLTAGE
3.3V
4.2V
5V
RATED CURRENT
60A
60A
60A
29A
CURRENT RANGE
0 ~ 60A
0 ~ 60A
0 ~ 60A
0 ~ 29A
RATED POWER
198W
252W
300W
348W
348W
RIPPLE & NOISE (max.) Note.2 150mVp-p
150mVp-p
150mVp-p
150mVp-p
150mVp-p
VOLTAGE ADJ. RANGE
LRS-350-12
LRS-350-15 LRS-350-24 LRS-350-36 LRS-350-48
12V
15V
24V
36V
48V
23.2A
14.6A
9.7A
7.3A
0 ~ 23.2A
0 ~ 14.6A
0 ~ 9.7A
0 ~ 7.3A
350.4W
349.2W
350.4W
150mVp-p
200mVp-p
200mVp-p
3.6 ~ 4.4V
4.5 ~ 5.5V
10.2 ~ 13.8V 13.5 ~ 18V
21.6 ~ 28.8V 32.4 ~ 39.6V 43.2 ~ 52.8V
VOLTAGE TOLERANCE Note.3 ±4.0%
±4.0%
±3.0%
±1.5%
±1.0%
±1.0%
±1.0%
±1.0%
LINE REGULATION Note.4 ±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
LOAD REGULATION Note.5 ±2.5%
±2.5%
±2.0%
±1.0%
±0.5%
±0.5%
±0.5%
±0.5%
88.5%
89%
2.97 ~ 3.6V
SETUP, RISE TIME
1300ms, 50ms/230VAC
HOLD UP TIME (Typ.)
16ms/230VAC
VOLTAGE RANGE
90 ~ 132VAC / 180 ~ 264VAC by switch
FREQUENCY RANGE
47 ~ 63Hz
1300ms,50ms/115VAC at full load
12ms/115VAC at full load 240 ~ 370VDC 85%
(switch on 230VAC)
EFFICIENCY (Typ.)
79.5%
AC CURRENT (Typ.)
6.8A/115VAC
3.4A/230VAC
INRUSH CURRENT (Typ.)
60A/115VAC
60A/230VAC
LEAKAGE CURRENT
<2mA / 240VAC
OVER LOAD
3.3~36V Hiccup mode, recovers automatically after fault condition is removed. 48V Shut down and latch off o/p voltage, re-power on to recover.
81.5%
83.5%
86%
88%
110 ~ 140% rated output power
PROTECTION
3.8 ~ 4.45V OVER VOLTAGE OVER TEMPERATURE
FAN ON/OFF CONTROL FUNCTION (Typ.)
4.6 ~ 5.4V
5.75 ~ 6.75V 13.8 ~ 16.2V 18 ~ 21V
28.8 ~ 33.6V 41.4 ~ 46.8V 55.2 ~ 64.8V
3.3~36V Hiccup mode, recovers automatically after fault condition is removed. 48V Shut down and latch off o/p voltage, re-power on to recover. 3.3~36V Hiccup mode, recovers automatically after fault condition is removed. 48V Shut down and latch off o/p voltage, re-power on to recover. RTH3≧50℃ FAN ON, ≦40℃ FAN OFF
WORKING TEMP.
-25 ~ +70℃ (Refer to "Derating Curve")
WORKING HUMIDITY
20 ~ 90% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85℃, 10 ~ 95% RH
SAFETY
TEMP. COEFFICIENT
±0.03%/℃ (0 ~ 50℃)
VIBRATION
10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY STANDARDS
IEC/UL 62368-1, BSMI CNS14336-1,EAC TP TC 004,KC K60950-1(for LRS-350-12/24 only), BIS IS13252(Part1): 2010/IEC 60950-1: 2005, AS/NZS62368.1 approved; Design refer to BS EN/EN62368-1
WITHSTAND VOLTAGE
I/P-O/P:3KVAC
O/P-FG:0.5KVAC
ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC / 25℃/ 70% RH EMC EMISSION
Compliance to BSMI CNS13438, EAC TP TC 020,KC KN32,KN35(for LRS-350-12/24 only)
EMC IMMUNITY
Compliance to BS EN/EN55035, EAC TP TC 020,KC KN32,KN35(for LRS-350-12/24 only)
MTBF OTHERS DIMENSION PACKING NOTE
I/P-FG:2KVAC
2099.9K hrs min.
Telcordia SR-332 (Bellcore) ; 328.6Khrs min.
MIL-HDBK-217F (25℃)
215*115*30mm (L*W*H) 0.76Kg; 15pcs/12.4Kg/0.78CUFT
℃ ℃/ (). ※ : , https://www.meanwell.com/serviceDisclaimer.aspx File Name:LRS-350-SPEC 2022-08-05
TRC ELECTRONICS, INC. 1.888.612.9514
www.trcelectronics.com
AC/DC Power Supply • 350W MEAN WELL LRS-350 Series
L R S - 3 5 0 series
350W Single Output Switching Power Supply Block Diagram RECTIFIERS & FILTER
115/230V(SW)
EMI FILTER
I/P
RECTIFIERS & FILTER
POWER SWITCHING
RECTIFIERS
FAN ON/OFF CONTROL +V -V
O.T.P. O.V.P.
FG PWM CONTROL
O.L.P.
Derating Curve
fosc : 65KHz
FAN
DETECTION CIRCUIT
Static Characteristics
100
100
90 80
70
LOAD (%)
LOAD (%)
60 40 20
-25
180 ~ 264VAC 90 ~ 132VAC
80
-20
-10
0
10
20
30
40
50
60
70
(HORIZONTAL)
AMBIENT TEMPERATURE (℃)
60 50 40 90 180
95 190
100 200
105 210
110 220
115 230
120 240
125 250
132 264
INPUT VOLTAGE (VAC) 60Hz
File Name:LRS-350-SPEC 2022-08-05
TRC ELECTRONICS, INC. 1.888.612.9514
www.trcelectronics.com
AC/DC Power Supply • 350W MEAN WELL LRS-350 Series
L R S - 3 5 0 series
350W Single Output Switching Power Supply Mechanical Specification
Case No.207A
Unit:mm
215 32.5
150
36.7
LED +V ADJ. 9 4-M4 L=3mm
7
50
6 5
47.45
4 8
115
135
9.5
8
3 32.5
2
16
1
15 32.5
150
Terminal Pin No. Assignment :
6.5 6.5
12.5
30
12.8 6.9
2 Air flow direction
4-M4(Both Sides) L=5mm
Pin No. 1 2 3
Assignment AC/L AC/N FG
Pin No. Assignment 4~6 DC OUTPUT -V 7~9 DC OUTPUT +V
File Name:LRS-350-SPEC 2022-08-05
TRC ELECTRONICS, INC. 1.888.612.9514
www.trcelectronics.com
SANDY HSU MEAN WELL ENTERPRISES CO LTD NO 28 WUQUAN 3RD RD WUGU DISTRICT NEW TAIPEI CITY 24891 TAIWAN
Date: Subscriber: PartySite: File No: Project No: PD No: Type: PO Number:
2019/05/07 710861002 74570 E183223 4788978185 19O24019 R
Subject: Procedure And/Or Report Material The following material resulting from the investigation under the above numbers is enclosed. Issue Date Vol Sec Pages Revised Date 2014/10/29
X1
A167
Revised Proc/Rpt Section
PO#Project No.: 4788978185 If there are illegible images in this package, legible images may be found online via MyHome@UL under My UL Reports/CDA. Please file revised pages and illustrations in place of material of like identity. New material should be filed in its proper numerical order. NOTE: Follow-Up Service Procedure revisions DO NOT include Cover Pages, Test Records and Conclusion Pages. Report revisions DO NOT include Authorization Pages, Indices, Section General Pages and Appendixes. Please review this material and report any inaccuracies to UL's Customer Service Professionals. Contact information for all of UL's global offices can be found at http://ul.com/aboutul/locations. If you’d like to receive updated materials FASTER, UL offers electronic access and/or delivery of this material. For more details, contact UL's Customer Service Professionals as shown above. This material is provided on behalf of UL LLC(UL) or any authorized licensee of UL. CAM File
Issue Date:
2014-10-29
Page 1 of 21
Report Reference #
E183223-A167-UL
2019-05-06
UL TEST REPORT AND PROCEDURE Standard:
Certification Type: CCN: Product: Model:
UL 60950-1, 2nd Edition, 2014-10-14 (Information Technology Equipment - Safety - Part 1: General Requirements) CAN/CSA C22.2 No. 60950-1-07, 2nd Edition, 2014-10 (Information Technology Equipment - Safety - Part 1: General Requirements) Component Recognition QQGQ2, QQGQ8 (Power Supplies for Information Technology Equipment Including Electrical Business Equipment) Switching Power Supply LRS-200-X, LRS-350-X (where X can be 3.3, 4.2, 5, 12, 15, 24, 36, 48) I/P: LRS-200-X: 100-120 Vac, 4.0 A; 200-240 Vac, 2.0 A, 50/60 Hz
Rating:
LRS-350-X: 100-120 Vac, 6.8A; 200-240 Vac, 3.4 A, 50/60 Hz O/P: see Enclosure ID 7-01 for details Applicant Name and Address:
MEAN WELL ENTERPRISES CO LTD NO 28 WUQUAN 3RD RD WUGU DISTRICT NEW TAIPEI CITY 24891 TAIWAN
This is to certify that representative samples of the products covered by this Test Report have been investigated in accordance with the above referenced Standards. The products have been found to comply with the requirements covering the category and the products are judged to be eligible for Follow-Up Service under the indicated Test Procedure. The manufacturer is authorized to use the UL Mark on such products which comply with this Test Report and any other applicable requirements of UL LLC ('UL') in accordance with the FollowUp Service Agreement. Only those products which properly bear the UL Mark are considered as being covered by UL's Follow-Up Service under the indicated Test Procedure. The applicant is authorized to reproduce the referenced Test Report provided it is reproduced in its entirety. UL authorizes the applicant to reproduce the latest pages of the referenced Test Report consisting of the first page of the Specific Technical Criteria through to the end of the Conditions of Acceptability.
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL.
Prepared by:
Hans Chen
Reviewed by: Katy Chen
Copyright © 2019
SANDY HSU MEAN WELL ENTERPRISES CO LTD NO 28 WUQUAN 3RD RD WUGU DISTRICT NEW TAIPEI CITY 24891 TAIWAN
Date: Subscriber: PartySite: File No: Project No: PD No: Type: PO Number:
2019/05/07 710861002 74570 E183223 4788978185 19O24019 R
Subject: Procedure And/Or Report Material The following material resulting from the investigation under the above numbers is enclosed. Issue Date Vol Sec Pages Revised Date 2014/10/29
X1
A167
Revised Proc/Rpt Section
PO#Project No.: 4788978185 If there are illegible images in this package, legible images may be found online via MyHome@UL under My UL Reports/CDA. Please file revised pages and illustrations in place of material of like identity. New material should be filed in its proper numerical order. NOTE: Follow-Up Service Procedure revisions DO NOT include Cover Pages, Test Records and Conclusion Pages. Report revisions DO NOT include Authorization Pages, Indices, Section General Pages and Appendixes. Please review this material and report any inaccuracies to UL's Customer Service Professionals. Contact information for all of UL's global offices can be found at http://ul.com/aboutul/locations. If you’d like to receive updated materials FASTER, UL offers electronic access and/or delivery of this material. For more details, contact UL's Customer Service Professionals as shown above. This material is provided on behalf of UL LLC(UL) or any authorized licensee of UL. CAM File
Issue Date:
2014-10-29
Page 1 of 21
Report Reference #
E183223-A167-UL
2019-05-06
UL TEST REPORT AND PROCEDURE Standard:
Certification Type: CCN: Product: Model:
UL 60950-1, 2nd Edition, 2014-10-14 (Information Technology Equipment - Safety - Part 1: General Requirements) CAN/CSA C22.2 No. 60950-1-07, 2nd Edition, 2014-10 (Information Technology Equipment - Safety - Part 1: General Requirements) Component Recognition QQGQ2, QQGQ8 (Power Supplies for Information Technology Equipment Including Electrical Business Equipment) Switching Power Supply LRS-200-X, LRS-350-X (where X can be 3.3, 4.2, 5, 12, 15, 24, 36, 48) I/P: LRS-200-X: 100-120 Vac, 4.0 A; 200-240 Vac, 2.0 A, 50/60 Hz
Rating:
LRS-350-X: 100-120 Vac, 6.8A; 200-240 Vac, 3.4 A, 50/60 Hz O/P: see Enclosure ID 7-01 for details Applicant Name and Address:
MEAN WELL ENTERPRISES CO LTD NO 28 WUQUAN 3RD RD WUGU DISTRICT NEW TAIPEI CITY 24891 TAIWAN
This is to certify that representative samples of the products covered by this Test Report have been investigated in accordance with the above referenced Standards. The products have been found to comply with the requirements covering the category and the products are judged to be eligible for Follow-Up Service under the indicated Test Procedure. The manufacturer is authorized to use the UL Mark on such products which comply with this Test Report and any other applicable requirements of UL LLC ('UL') in accordance with the FollowUp Service Agreement. Only those products which properly bear the UL Mark are considered as being covered by UL's Follow-Up Service under the indicated Test Procedure. The applicant is authorized to reproduce the referenced Test Report provided it is reproduced in its entirety. UL authorizes the applicant to reproduce the latest pages of the referenced Test Report consisting of the first page of the Specific Technical Criteria through to the end of the Conditions of Acceptability.
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL.
Prepared by:
Hans Chen
Reviewed by: Katy Chen
Copyright © 2019
Issue Date:
2014-10-29
Page 2 of 21
Report Reference #
E183223-A167-UL
2019-05-06 Supporting Documentation The following documents located at the beginning of this Procedure supplement the requirements of this Test Report: A. Authorization - The Authorization page may include additional Factory Identification Code markings. B. Generic Inspection Instructions i. Part AC details important information which may be applicable to products covered by this Procedure. Products described in this Test Report must comply with any applicable items listed unless otherwise stated in the body of this Test Report. ii. Part AE details any requirements which may be applicable to all products covered by this Procedure. Products described in this Test Report must comply with any applicable items listed unless otherwise stated in the body of each Test Report. iii. Part AF details the requirements for the UL Certification Mark which is not controlled by the technical standard used to investigate these products. Products are permitted to bear only the Certification Mark(s) corresponding to the countries for which it is certified, as indicated in each Test Report. Product Description The product is a Switching Power Supply for use in Information Technology Equipment (ITE). The product is composed of terminal block, DC fan, mainboard, and housed in a metal chassis. Model Differences Models LRS-200-X series are similar except for model designation, output rating, Transformer T1, secondary component (L100) coil number. Models LRS-350-X series are similar except for model designation, output rating, Transformer T1, secondary component (L100) coil number. Models LRS-350-X series are similar to Models LRS-200-X series, except for model designation, output rating, Fuse rating, top chassis, with DC Fan, primary component (C5, C6) rating. Technical Considerations
Equipment mobility : for building-in
Connection to the mains : to be determined in the end product
Operating condition : continuous
Access location : to be determined in the end product
Over voltage category (OVC) : OVC II
Mains supply tolerance (%) or absolute mains supply values : +10%, -10%
Tested for IT power systems : No
IT testing, phase-phase voltage (V) : N/A
Class of equipment : Class I (earthed)
Considered current rating of protective device as part of the building installation (A) : to be determined in the end product
Pollution degree (PD) : PD 2
IP protection class : IP X0
Altitude of operation (m) : up to 2000 m
Altitude of test laboratory (m) : less than 2000 meters
Mass of equipment (kg) : LRS-200-X series: 0.632; LRS-350-X series: 0.722
Issue Date:
2014-10-29
Page 3 of 21
Report Reference #
E183223-A167-UL
2019-05-06
The product was submitted and evaluated for use at the maximum ambient temperature (Tma) permitted by the manufacturer’s specification of: 50°C (for all models except for Models LRS-200-3.3, LRS-200-4.2 and LRS-200-5V); 40°C (for models LRS-200-3.3, LRS-200-4.2 and LRS-200-5V)
The means of connection to the mains supply is: To be evaluated in the end product
The product is intended for use on the following power systems: TN
The equipment disconnect device is considered to be: To be evaluated in the end product
The following accessible locations (with circuit/schematic designation) are within a limited current circuit: Secondary side of bridging capacitor C31
Engineering Conditions of Acceptability For use only in or with complete equipment where the acceptability of the combination is determined by UL LLC. When installed in an end-product, consideration must be given to the following:
The end-product Electric Strength Test is to be based upon a maximum working voltage of: PrimarySELV: 272 Vrms, 680 Vpk, Primary-Earthed Dead Metal: 240 Vrms, 440 Vpk
The following secondary output circuits are SELV: All outputs for all models
The following secondary output circuits are at hazardous energy levels: LRS-350-4.2, LRS-350-5, LRS-350-12, LRS-350-15, LRS-350-24, LRS-350-36, LRS-350-48, LRS-200-12, LRS-200-15, LRS200-36, LRS-200-24, LRS-200-48.
The following secondary output circuits are at non-hazardous energy levels: LRS-350-3.3, LRS-2003.3, LRS-200-4.2, LRS-200-5.
The following output terminals were referenced to earth during performance testing: GND
The power supply terminals and/or connectors are: Terminal block is suitable for field wiring for AC input, however the overall product has only been evaluated for factory wiring; Suitable for factory wiring only for output.
The maximum investigated branch circuit rating is: 20 A
The investigated Pollution Degree is: 2
Proper bonding to the end-product main protective earthing termination is: Required
An investigation of the protective bonding terminals has: Been conducted
The following input terminals/connectors must be connected to the end-product supply neutral: The neutral terminal (marked 'AC/N') of Terminal Block (TB1).
The following magnetic devices (e.g. transformers or inductor) are provided with an OBJY2 insulation system with the indicated rating greater than Class A (105°C): T1 (Class B)
The following end-product enclosures are required: Mechanical, Fire, Electrical
The equipment is suitable for direct connection to: AC mains supply
Additional Information Under project 4788978185: 1. Add one alternative DC Fan module model FD126015-SL1, manufactured by DOCENG TECHNOLOGY CO LTD. Markings and instructions Clause Title
Marking or Instruction Details
Power rating - Ratings Ratings (voltage, frequency/dc, current)
Issue Date:
2014-10-29
Page 8 of 21
Report Reference #
E183223-A167-UL
2019-05-06 03-1a. Insulating Tubing Hamburg Industries H-2 / Sleeving (Applied on Co Ltd. fan leads and thermal switch leads) - Alternate 03-1b. Insulating Tubing Sumitomo Electric Sumitube NHR2 / Sleeving (Applied on Fine Polymer Inc. fan leads and thermal switch leads) - Alternate 03-1c. Insulating Tubing Shenzhen Woer RSFR-H / Sleeving (Applied on Heat-Shrinkable fan leads and thermal Material Co Ltd. switch leads) - Alternate 03-1d. Insulating Tubing Dongguan Yongchao YC-15-25-40-70 / Sleeving (Applied on Insulation Material Co fan leads and thermal Ltd switch leads) - Alternate 04. Insulation Sheet (for --Models LRS-200-3.3, LRS-200-4.2, LRS-2005) 04a. Insulation Sheet (for --all models except for Models LRS-200-3.3, LRS-200-4.2, LRS-2005) - Alternate 04-1. Material of Formex,Div Of Illionis Formex GK Insulation Sheet Tool Works Inc. 04-1a. Material of Sabic Innovative FR700 Insulation Sheet Plastics Alternate 04-1b. Material of 3M Taiwan Ltd IS-250-a Insulation Sheet Alternate 04-1c. Material of Sun Delta Corp VS(f) Insulation Sheet Alternate 04-1d. Material of Sichuan Dongfang DFR117,
Rated 125°C, 600 V. Minimum 0.4 mm thick
YDPU2
UL
Rated 125°C, 600 V. Minimum 0.4 mm thick
YDPU2
UL
Rated 125°C, 600 V. Minimum 0.4 mm thick
YDPU2
UL
Rated VW-1, minimum 0.4 mm UZIQ2 thick.
UL
Provided between Chassis and -Main board, see Enclosure ID 4-03 for dimension details.
--
Provided between Chassis and -Main board, see Enclosure ID 4-04 for dimension details.
--
Rated VTM-0, 115°C, minimum QMFZ2 0.2 mm thick Rated V-0, 125°C, minimum QMFZ2 0.2 mm thick
UL
Rated V-0, 105°C, minimum 0.2 mm thick
OCDT2
UL
Rated VTM-0, 120°C, minimum QMFZ2 0.2 mm thick
UL
Rated V-0, 80°C, minimum 0.2
UL
QMFZ2
UL
Multi-zone LED Dimmer Pro Introduction This Multi-zone LED Dimmer Pro kit is highly sensitive and professional grade, suitable for any strip lighting projects. With its high wattage capacity and sleek control design, this RF (Radio Frequency) dimmer remote is easy to set up multi-zone lighting and offer optimal dimming functions for 12V and 24V DC dimmable LED strip lights, up to 4 zones, independently or synchronously. It allows to accurately adjust brightness without any flickering, creating the perfect level of ambient lighting for any occasion. Zones are ideal for home and commercial lighting where different rooms or areas in a room require a different amount of light. You can set each zone individually and create the perfect ambiance lighting. This way you can save energy by turning off the zones that are not needed. You also can save colors or scenes to be easily retrieved later. Each zone has a dedicated button for easy switching and you can save up to three scenes for each zone. On the highly sensitive touch wheel, you can fine tune the brightness level you want. This RF dimmer is a remote control designed with great flexibility. It is paired with a four channel Pro Dimmer Receiver, which supports 8 Amps at 12V - 24V DC on each channel. One remote can control unlimited receivers within the control range. The receiver is WiFi compatible. Adding a WiFi-RF gateway converter, the receivers can work as WiFi dimmers, which can be controlled by your smart phone or tablet via WiFi connection, using an application software installed with Apple IOS or Android mobile system.
By pairing multiple of these LED Dimmer Pro Receivers with the remote control, you can greatly reduce wiring work and simplify your LED strip light installation, saving labor and time. The remote comes with a magnetic holder that can be installed anywhere using 3M double-sided tape or screws. When you are done using the remote, just attach to the magnetic holder. The applicable LED strip lights that work with this Pro Dimmer include white and single colored light strips, such as warm white, neutral white, daylight cool white, red, blue, green, etc. Product Features Remote control is black finish. Receiver is UL listed. Smooth dimming and switch on/off functionality, no flickering. High capacity, 8A per channel, total 384 watts at 12 volts, or 768 watts at 24 volts. One remote can control an unlimited number of the Pro dimmer receivers within a control range of 30 meter (100 feet) radius in a benign electromagnetic environment. RF signal goes through walls. Power off memory function. When powered on next time, the lights will return to their previous brightness. Wireless remote control, with no needs to deal with extra wires. Receiver is WiFi compatible. Add a WiFi-RF gateway converter, it can become a WiFi dimmer. Multi zone (up to 4) control function. Save scenes to be recalled later. Four dedicated buttons for easily adjust the brightness level to 25, 50, 75 and 100 percent. Remote dimensions: 120x55x17mm (4.72 x 2.16 x 0.67in). Receiver dimensions: 95x37x20mm (3.74 x 1.45 x 0.79in). Magnetic holder dimensions: 97mm x 35mm x 15.5mm. 3M VHB double-sided tape and two screws are included for installing the holder.
The load capacity depends on the dimmer receiver's wattage, not the remote. If you are setting up multi zone LED lighting, you can buy multiple the Pro WattMax Dimmer Receivers. Of course, you can buy multiple the Pro remotes to place in different locations for convenience as well. One receiver can only be paired with at most 8 remote controls. If you like to see more dimmer choices, please check our LED dimmer series. Specifications Model: Type: Multi Zone: Remote Input Volt: Receiver Input Volt: Light Color: Output Channels: Output Max Amps: Output Voltage: Output Wattage: Control Range: Remote Sizes: Receiver Sizes: Waterproof: Rating: Warranty:
wattmax-dim-pro-kit RF Wireless. WiFi Compatible. 4 zones 4.5V(AAA battery x 3, NOT included) 12V or 24V DC White, or Single Colored 4 CH 8A Max / CH 12V or 24V DC 384W or 768W 100ft(30 meters) 120x75x42mm (4.72 x 2.95 x 1.64in) 168x58x28mm (6.61 x 2.28 x 1.10in) IP20 CE, RoHS, UL(receiver) 2 Years
The kit is ready for installation, items included: A Pro Touch Remote Control, multi zone (4 zones and 3 scenes/zone), touch wheel and button style A Dimmer Receiver Pro, 4 channels x 8 Amps/channel
RF UL DIMMER SWTICH
WiFi Convertor
09.288WT.04336
Operation 1.Download application from ‘app store’ or ‘google play’ by searching ‘easylighting’ or scanning below two-dimension code.
Important: Read All Instructions Prior to Installation
2.If the convertor has connected with router, then connect your cell phone
Function introduction
to your router network.If the convertor did not connect with router, then
Andriod
connect your cell phone to the convertor network directly. (Password:0123456789) 12-24VDC Power input
3. Open the easylighting application and operating according the application manual.
Wiring diagram (12-24VDC)
(12-24VDC)
ANT1
WIFI-RF Convertor
(12-24VDC)
Configure & Reset button
Click to pair with controller, press and hold down to delete the pairing
ANT1
WIFI-RF Convertor
(12-24VDC)
Configure & Reset button
Tx
Tx
ANT2
Link
12-24VDC PSU
Ready
Power normal indicator WiFi connected indicator RF connected indicator
Product Data Output
RF signal
Operation Frequency
2.4G
Power Supply
12-24VDC
Operating temperature
0-40°C
Relative humidity
8% to 80%
Dimensions
99x50x20mm
• The convertor works with RF receiver series to be controlled by IOS or Android system via WIFI. • Waterproof grade: IP20
Safety & Warnings • DO NOT install with power applied to device. • DO NOT expose the device to moisture.
AC 100-240V
Link Ready
ANT2
IOS
COB Lighting Specifications
CERTIFICATE OF COMPLIANCE Certificate Number Report Reference Issue Date
Issued to:
This is to certify that representative samples of
20180921-E482473 E482473-20160222 2018-SEPTEMBER-21
ADVANCED LIGHTING CONCEPTS INC, DBA ENVIRONMENTALLIGHTS.COM SUITE 102 11235 W BERNARDO CT SAN DIEGO, CA 92127 USA LIGHT-EMITTING-DIODE ARRAYS, MODULES AND CONTROLLERS - COMPONENT See Addendum Have been investigated by UL in accordance with the Standard(s) indicated on this Certificate.
Standard(s) for Safety: Additional Information:
See addendum page for Standards See the UL Online Certifications Directory at www.ul.com/database for additional information
Only those products bearing the UL Certification Mark should be considered as being covered by UL's Certification and Follow-Up Service. The UL Recognized Component Mark generally consists of the manufacturer’s identification and catalog number, model number or other product designation as specified under “Marking” for the particular Recognition as published in the appropriate UL Directory. As a supplementary means of identifying products that have been produced under UL’s Component Recognition Program, UL’s Recognized Component Mark: , may be used in conjunction with the required Recognized Marks. The Recognized Component Mark is required when specified in the UL Directory preceding the recognitions or under “Markings” for the individual recognitions. Recognized components are incomplete in certain constructional features or restricted in performance capabilities and are intended for use as components of complete equipment submitted for investigation rather than for direct separate installation in the field. The final acceptance of the component is dependent upon its installation and use in complete equipment submitted to UL LLC. Look for the UL Certification Mark on the product.
Bruce Mahrenholz, Director North American Certification Program UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
Page 1 of 2
CERTIFICATE OF COMPLIANCE Certificate Number Report Reference Issue Date
20180921-E482473 E482473-20160222 2018-SEPTEMBER-21
This is to certify that representative samples of the product as specified on this certificate were tested according to the current UL requirements. LED Controller; pro-4-in-1-receiver, pro-4-in-1-receiver-t, pro-4-in-1-receiver-wifi, pro-4-in-1-receiver-5A, pro-4-in-1receiver-CC-350mA, pro-4-in-1-receiver-CC-700mA, pro-4-in-1-receiver-p, pro-4-in-1-receiver-pd, pro-0-to-10-4-1, pro-0to-10-4-4, pro-0-to-10-4-4-p, pro-0-to-10-1-1, pro-DMX-4-5A, pro-DMX-4-8A, DMX-4-8A, pro-DMX-4-5A-DIN, pro-DMX-45A-p, pro-DMX-SA-4-5A-DIN, pro-DMX-SA-4-8A, pro-DMX-SA-4-5A, pro-DMX-5-5A, DMX-5-8A, pro-DMX-4-35-CC, proDMX-4-70-CC, pro-DMX, pro-DALI-4-5A, pro-DALI-4-8A, pro-DALI-4-5A-p, pro-DALI-1-8A, dim-pro-4ch-5a, dim-pro-1ch8a, dim-pro-4ch-5a-p, pro-repeat-4-8A, pro-0-to-10-4-1-wp, wpDMX-4-5A, pro-DALI-4-5A-wp, dim-pro-4ch-5a-wp, DMX12-30K-5A, DMX-24-30K-4A
Standards: UL 8750 Light Emitting Diode (LED) Equipment for Use in Lighting Products CSA C22.2 No. 250.13-14 Light Emitting Diode (LED) Equipment for Lighting Applications
Bruce Mahrenholz, Director North American Certification Program UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
Page 2 of 2
CERTIFICATE OF COMPLIANCE Certificate Number Report Reference Date Issued to:
This is to certify that representative samples of
E519810 E519810 26-May-2021 Shenzhen BTF-Lighting Technology Co Ltd 2F Factory Building C Chuangfu Tech Park No.202 Shihuan Rd. Longteng Community Shiyan St. Baoan Dist. Shenzhen , guangdong, China 518000 IFDR - Low-voltage Lighting Systems, Power Units, Luminaires and Fittings See Addendum Page for Product Designation(s). Have been investigated by UL in accordance with the Standard(s) indicated on this Certificate.
Standard(s) for Safety:
UL 2108, 2nd Ed., Issue Date: 2015-12-07, Revision Date: 2019-12-06
Additional Information:
See the UL Online Certifications Directory at https://iq.ulprospector.com for additional information
This Certificate of Compliance does not provide authorization to apply the UL Recognized Component Mark. Only the UL Follow-Up Services Procedure provides authorization to apply the UL Mark. Only those products bearing the UL Recognized Component Mark should be considered as being UL Certified and covered under UL’s Follow-Up Services. Look for the UL Recognized Component Mark on the product. UL-CA-2015352-0 E519770-20210318
Bruce Mahrenholz, Director North American Certification Program UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
CERTIFICATE OF COMPLIANCE Certificate Number Report Reference Date
E519810 E519810 26-May-2021
This is to certify that representative samples of the product as specified on this certificate were tested according to the current UL requirements Model BTF-24V-FCOB-360L-C-L, C can be W, B, Y, S or T to represent the Color of LED PWB, W=White, B=Black, Y=Yellow, S=Silver, T=transparent,
Category Description Low Voltage Lighting Systems
Bruce Mahrenholz, Director North American Certification Program UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
UL/CSA RECOGNIZED WIRE TABLE OF CONTENTS
SYNOPSIS OF UL/CSA RECOGNIZED WIRE
Page
2-1
UL RECOGNIZED WIRE UL AWM Style 1061 UL AWM Style 1006 UL AWM Style 1007 UL AWM Style 1010 UL AWM Style 1731 UL AWM Style 1569 UL AWM Style 1015
APPLIANCE WIRING MATERIAL APPLIANCE WIRING MATERIAL APPLIANCE WIRING MATERIAL APPLIANCE WIRING MATERIAL APPLIANCE WIRING MATERIAL APPLIANCE WIRING MATERIAL APPLIANCE WIRING MATERIAL
Page Page Page Page Page Page Page
2-2, 2-3 2-4, 2-5 2-6, 2-7 2-8, 2-9 2-10, 2-11 2-12, 2-13 2-14, 2-15
CSA CERTIFIED WIRE CSA AWM 1 A/B (previously S-R PVC, T2) CSA Type T-R 64 CSA TEW THERMOPLASTIC
BUSINESS MACHINE WIRE RADIO WIRE EQUIPMENT WIRE
Page Page Page
2-16, 2-17 2-18, 2-19 2-20, 2-21
NABOND* - STRANDED CONDUCTOR IN AN INSULATED WIRE BONDED STRANDED CONDUCTOR SOLID TINNED COPPER All sizes and gauges 26-12
Page
2-22, 2-23
OTHER UL LISTED OR RECOGNIZED WIRES, CABLES AND MATERIALS ASTM-B-33 SOLID TINNED COPPER HIGH VOLTAGE SILICON RUBBER LEADWIRE UL3239
Page Page
2-24, 2-25 2-26, 2-27
OLYMPIC WIRE AND CORDAGE LENGTH METERS HOW TO SPECIFY WIRE HOW TO SPECIFY PAIRS
Page Page Page
2-28 2-29 2-30
NATIONAL WIRE & CABLE custom cable manufacturing & molding • www.nationalwire.com
Order Desk 323-225-5611
U/L RECOGNIZED WIRE Thermoplastic Insulation
Wires recognized by the Underwriters’ Laboratories, Inc for operation in an air or an oil environment, U.L. File #E35793.
U.L. AWM Style 1015
• U/L Recognized Appliance Wiring Material • VW-1 Rated • 1/32” Vinyl Insulation for 24 - 10 gauge • 105ºC Service** UL Rated • 2500 Volts Electronic 600 Volts Appliance Meets MIL-W-16878/3, UL Style 1011 for 80ºC Service and UL Style 1013 for 90ºC Service except where noted. GAUGE (AWG)
24 24 24 22 22 22 20 20 20 20 18 18 18 18 16 16 14 14 12 12 10 10 10 8 6
PART NO.
N600-124U N600-732U N600-1936 N600-122U N600-730U N600-1934U N600-120U N600-728U N600-1030U* N600-1932U N600-118U N600-726U N600-1630U* N600-1930U N600-116U N600-2630U N600-114U N600-4130U N600-3728U N600-6530U N600-3726U N600-4927U* N600-10530U* N600-13329U N600-13327U
NUMBER OF STRANDS (AWG)
1 7 19 1 7 19 1 7 10 19 1 7 16 19 1 26 1 41 37 65 37 49 105 133 133
GAUGE OF STRANDS (AWG)
24 32 36 22 30 34 20 28 30 32 18 28 30 30 16 30 14 30 28 30 26 27 30 29 27
Agency Voltage Rating Factory Spark-Test Voltage Insulation Breakdown Voltage IR: Insulation Resistance, wet Nominal Dielectric Constant value Flame Properties Fungus
600 V for appliance use, 2500 V peak, for electronic use. 6000 VAC. 100% of all wire is tested at this voltage. > 8000 volts, peak. > 2900 megohm/100 mtr, metal to water bath at +20ºC 4 Self extinguishing. Meets UL VW-1 Fungus resistant
**Suitable for operation at +105ºC in air or up to 80ºC in oil.
NOM. DIAM. OF STRANDED CONDUCTOR IN. mm
.0201 .0240 .0240 .0253 .0300 .0300 .0320 .0380 .0380 .0380 .0403 .0480 .0450 .0480 .0508 .0550 .0641 .0710 .0890 .0890 .1070 .1100 .1150 .167 .210
Tinned Copper Stranded
.511 .610 .610 .643 .762 .762 .813 .965 .965 .965 1.02 1.22 1.14 1.22 1.29 1.40 1.63 1.80 2.26 2.26 2.72 2.79 2.92 4.24 5.3
NOM. FIN. WIRE DIAM. IN.
.082 .086 .086 .088 .092 .092 .094 .100 .100 .100 .102 .110 .107 .110 .113 .117 .126 .134 .156 .165 .178 .174 .179 .257 .330
mm
2.08 2.18 2.18 2.24 2.34 2.34 2.39 2.54 2.54 2.54 2.59 2.79 2.72 2.79 2.87 2.97 3.20 3.40 3.96 4.19 4.52 4.42 4.55 6.52 8.38
MAX. RESISTANCE (dc at 20º C) Ω /per 1000-ft
27.20 26.20 25.40 17.20 16.70 15.90 10.70 10.40 11.80 9.76 6.78 6.54 6.48 6.22 4.26 4.59 2.68 2.94 2.01 1.85 1.26 1.09 .98 .710 .444
Km
89 86 83 56 55 52 35 34 39 32 22 21 21 20 14 15 9 9.6 6.6 6.1 4.1 3.6 3.2 2.328 1.456
NOM. WT. LBS per 1000-ft
4.2 4.0 4.1 5.0 5.2 5.3 6.8 7.3 7.3 7.3 9.3 9.7 9.8 10.0 12.6 12.5 16.9 17.9 28.9 28.5 38.6 40.6 41.5 70.8 110
Kg/Km
6.25 5.95 6.10 7.44 7.74 7.88 10.11 10.86 10.86 10.86 13.84 14.43 14.58 14.88 18.75 18.60 25.15 26.64 43.00 42.41 57.44 60.41 61.75 106 165
Standard basic insulation color numbers are: Black: 0, Brown: 1, Red: 2, Orange: 3, Yellow: 4, Green: 5, Blue: 6, Violet: 7, Gray: 8, White: 9. The insulation color code number, may be 1, 2 or 3 digits depending on the number or absence of stripes. The 1st number is color of Insulation, 2nd number is color of first stripe; 3rd number is color of the second stripe. Example: White wire(9) + Red stripe(2) + Black stripe(0) makes a color code number of “9-2-0”. That color number, “9-2-0” is appended to the part number. Sample part number might be “xxxxxx-xxx-9-2-0” * Non-Military
NATIONAL WIRE & CABLE custom cable manufacturing & molding • www.nationalwire.com
Order Desk 323-225-5611
2-14
U/L RECOGNIZED WIRE U.L. AWM Style 1015 all RoHS products have the letter “R” written into the second position of the Part No.
RoHS COMPLIANT PRODUCTS: GAUGE (AWG)
24 24 24 22 22 22 20 20 20 20 18 18 18 18 16 16 14 14 12 12 10 10 10 8 6
PART NO.
NR600-124U NR600-732U NR600-1936 NR600-122U NR600-730U NR600-1934U NR600-120U NR600-728U NR600-1030U* NR600-1932U NR600-118U NR600-726U NR600-1630U* NR600-1930U NR600-116U NR600-2630U NR600-114U NR600-4130U NR600-3728U NR600-6530U NR600-3726U NR600-4927U* NR600-10530U* NR600-13329U NR600-13327U
NUMBER OF STRANDS (AWG)
1 7 19 1 7 19 1 7 10 19 1 7 16 19 1 26 1 41 37 65 37 49 105 133 133
GAUGE OF STRANDS (AWG)
24 32 36 22 30 34 20 28 30 32 18 28 30 30 16 30 14 30 28 30 26 27 30 29 27
NOM. DIAM. OF STRANDED CONDUCTOR IN. mm
.0201 .0240 .0240 .0253 .0300 .0300 .0320 .0380 .0380 .0380 .0403 .0480 .0450 .0480 .0508 .0550 .0641 .0710 .0890 .0890 .1070 .1100 .1150 .167 .210
.511 .610 .610 .643 .762 .762 .813 .965 .965 .965 1.02 1.22 1.14 1.22 1.29 1.40 1.63 1.80 2.26 2.26 2.72 2.79 2.92 4.24 5.3
NOM. FIN. WIRE DIAM. IN.
.082 .086 .086 .088 .092 .092 .094 .100 .100 .100 .102 .110 .107 .110 .113 .117 .126 .134 .156 .165 .178 .174 .179 .257 .330
mm
2.08 2.18 2.18 2.24 2.34 2.34 2.39 2.54 2.54 2.54 2.59 2.79 2.72 2.79 2.87 2.97 3.20 3.40 3.96 4.19 4.52 4.42 4.55 6.52 8.38
MAX. RESISTANCE (dc at 20º C) Ω /per 1000-ft
27.20 26.20 25.40 17.20 16.70 15.90 10.70 10.40 11.80 9.76 6.78 6.54 6.48 6.22 4.26 4.59 2.68 2.94 2.01 1.85 1.26 1.09 .98 .710 .444
Km
89 86 83 56 55 52 35 34 39 32 22 21 21 20 14 15 9 9.6 6.6 6.1 4.1 3.6 3.2 2.328 1.456
NOM. WT. LBS per 1000-ft
4.2 4.0 4.1 5.0 5.2 5.3 6.8 7.3 7.3 7.3 9.3 9.7 9.8 10.0 12.6 12.5 16.9 17.9 28.9 28.5 38.6 40.6 41.5 70.8 110
Kg/Km
6.25 5.95 6.10 7.44 7.74 7.88 10.11 10.86 10.86 10.86 13.84 14.43 14.58 14.88 18.75 18.60 25.15 26.64 43.00 42.41 57.44 60.41 61.75 106 165
Standard basic insulation color numbers are: Black: 0, Brown: 1, Red: 2, Orange: 3, Yellow: 4, Green: 5, Blue: 6, Violet: 7, Gray: 8, White: 9. The insulation color code number, may be 1, 2 or 3 digits depending on the number or absence of stripes. The 1st number is color of Insulation, 2nd number is color of first stripe; 3rd number is color of the second stripe. Example: White wire(9) + Red stripe(2) + Black stripe(0) makes a color code number of “9-2-0”. That color number, “9-2-0” is appended to the part number. Sample part number might be “xxxxxx-xxx-9-2-0” * Non-Military
2-15
NATIONAL WIRE & CABLE custom cable manufacturing & molding • www.nationalwire.com
Order Desk 323-225-5611
UL/CSA RECOGNIZED WIRE
SYNOPOSIS OF POPULAR UNDERWRITERS & CANADIAN STANDARDS ASSN. ELECTRONIC HOOK UP WIRES UNDERWRITERS APPLIANCE WIRING MATERIAL (AWM) HOOKUP WIRES
U.L. STYLE NUMBER
UL RATING VOLTAGE TEMP ºC
WIRE INSULATION TYPE
SIZE RANGE (AWG)
1004 1005 1006 1503 1007 1569 1008 1009 1010 1195 1208 1011 1013 1015 1015 1015 1015 1012 1014 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1316 1317 1318 1319 1320 1321 1731
none none none 150 300 300 300 300 300 300 300 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600/2500 600/2500 600 600 600 600 600 600 300
80 90 105 85 80 105 80 90 105 80 80 80 90 105 105 105 105 80 90 105 80 80 80 80 80 80 80 90 90 90 90 105 105 105 105 105 105 105 105 105
.008” PVC + nylon .008” PVC + nylon .008” PVC + nylon .010” PVC + shid + jkt 1/64” PVC 1/64” PVC 1/64” PVC + nylon 1/64” PVC + nylon 1/64” PVC + nylon .015” PVC .013” PVC 1/32” PVC 1/32” PVC 1/32” PVC 1/32” PVC 1/32” PVC 1/32” PVC 1/32” PVC + nylon 1/32” PVC + nylon 1/32” PVC + nylon 3/64” PVC 3/64” PVC 1/16” PVC 5/64” PVC 3/32” PVC 7/64” PVC 1/8” PVC 3/64” PVC 1/16” PVC 1/16” PVC 5/64” PVC 3/64” PVC 3/64” PVC + nylon .015” + nylon .020” + nylon .030” + nylon .040” + nylon .050” + nylon .060” + nylon .009” PVC (semi-rigid)
30 - 16 30 - 16 30 - 16 26 - 20 32 - 16 30 - 10 28 - 12 28 - 12 28 - 12 30 - 14 30 - 16 28 - 9 28 - 9 28 - 9 8-7 6-2 1 - 3/0 28 - 9 28 - 9 28 - 9 22 - 8 8-6 8-2 1 - 4/0 225 - 500 MCM 525 - 1M, MCM 1.1 - 2M, MCM 22 - 8 8-6 8-2 1 - 4/0 22 - 8 8-6 26 - 12 10 8-6 4-2 1 - 4/0 250 - 100 MCM 32 - 16
1061 1354 1434 10493 10493 10493
300 30 30 300 300 300
80 80 - 60 60 80 80 80
300
90
.009” PVC
30 - 16
TEW
600
105
various PVC, walls 1/32” min.
26 - 4/0
1722
600
125
.031 TPR
28 - 10
U.L. STYLE NUMBER TR-64 Radio Wire TR-32 Radio Wire and AWM 1 A/B
2-1
USAGE
General purpose appliance wiring.
600 volt rating for electronic use. Rated 300 volts for appliance usage.
Internal wiring in electric bookkeeping, accounting or time-recording machine. Rated 600 volts for general appliance use, 2500 volts for electronic use.
General purpose appliance wiring 2500 volt electronic use.
General purpose appliance wiring.
General purpose appliance wiring 2500 volts electronic use. General purpose appliance wiring. Similar to THHN. For further processing in cables for electronic equipment. Business machine and electronic equipment Coaxial cable. Flame retardant coaxial cable
.009” PVC (semi-rigid) 30 - 16 .002” - .125” P.E. 40 AWG Min. .009” - .012” F.R.P.E. + nylon 30 - 20 .008” PP 32 - 20 For further processing in cables for electronic .010” PP 18 - 16 equipment or appliances .012” PP 14 - 10 CANADIAN STANDARDS ASSOCIATION CERTIFIED HOOKUP WIRES UL RATING WIRE INSULATION SIZE RANGE USAGE VOLTAGE TEMP ºC TYPE (AWG) 300 90 1/64” PVC 28 - 14 General radio and electronic usage. Wires having both CSA and U.L. approval are 600 90 1/32” PVC 24 - 10 available. (Previously S-R PVC, T2) Internal wiring of process control computers and business machines Thermoplastic equipment wire 600V Appliance 2500V Electronic Use
NATIONAL WIRE & CABLE custom cable manufacturing & molding • www.nationalwire.com
Order Desk 323-225-5611
Issue Date:
2014-10-29
Page 15 of 21
Report Reference #
E183223-A167-UL
2019-05-06 21. Bridge Capacitor (C31) (Optional)
Murata MFG Co Ltd
KX
21a. Bridge Capacitor (C31) (Optional) Alternate 21b. Bridge Capacitor (C31) (Optional) Alternate 21c. Bridge Capacitor (C31) (Optional) Alternate 22. Optical Isolator (U2, U3)
Walsin Technology Corp
AH
TDK-EPC Corp
CD
Welson Industrial Co Ltd
WD
Cosmo Electronics Corp
K1010
22a. Optical Isolator (U2, Lite-On Technology U3) - Alternate Corp
22b. Optical Isolator (U2, Sharp Corp U3) - Alternate Electronic Components And Devices Div 23. Silicon Rubber Six Phase Co Ltd
LTV-817 may be followed by suffix M, S, S-TA, S TA1, S-TP PC123
610-610
23a. Silicon Rubber Alternate
Six Phase Co Ltd
610-620
23b. Silicon Rubber Alternate
Six Phase Co Ltd
SP-610#
Rated maximum 2200 pF, minimum 250 V, minimum 125°C Marked with Y1. Rated maximum 2200 pF, minimum 250 V, minimum 125°C Marked with Y1. Rated maximum 2200 pF, minimum 250 V, minimum 125°C Marked with Y1. Rated maximum 2200 pF, minimum 250 V, minimum 125°C Marked with Y1. Double protection optical isolated switches, providing 5000 Vac isolation. Double protection optical isolated switches, providing 5300 Vac isolation.
FOWX2
UL
FOWX2
UL
FOWX2
UL
FOWX2
UL
FPQU2
UL
FPQU2
UL
Double protection optical isolated switches, providing 5000 Vac isolation.
FPQU2
UL
Rated minimum V-2, RTI QMFZ2 105°C, minimum 0.25 mm thick, provided between Q1 body and Q2 body and chassis, see Enclosure ID 4-07 for details Rated minimum V-2, RTI QMFZ2 105°C, minimum 0.3 mm thick, provided between Q1 body and Q2 body and chassis, see Enclosure ID 4-07 for details Rated minimum V-2, RTI QMFZ2 150°C, minimum 0.25 mm thick, provided between Q1
UL
UL
UL
Issue Date:
2014-10-29
Page 16 of 21
Report Reference #
E183223-A167-UL
2019-05-06
23c. Silicon Rubber Alternate
Pioneer Material Precision Tech
PMP-P-100
23d. Silicon Rubber Alternate
Shin-Etsu Chemical Co., Ltd
KE-5612G
23e. Silicon Rubber Alternate
Ta Yang Silicone Chemical Industrial Co Ltd
TS-160FR
24. Transformer (T1) (for -output voltage 3.3V)
--
24a. Transformer (T1) (for output voltage 4.2V and 5V)
--
--
24c. Transformer (T1) (for output voltage 12V)
--
--
body and Q2 body and chassis, see Enclosure ID 4-07 for details Rated minimum V-2, RTI QMFZ2 150°C, minimum 0.28 mm thick, provided between Q1 body and Q2 body and chassis, see Enclosure ID 4-07 for details Rated minimum V-2, RTI QMFZ2 150°C, minimum 0.20 mm thick, provided between Q1 body and Q2 body and chassis, see Enclosure ID 4-07 for details Rated minimum V-2, RTI QMFZ2 150°C, minimum 1.0 mm thick, provided between Q1 body and Q2 body and chassis, see Enclosure ID 4-07 for details Open type construction. Core, -Ferrite, overall approximately maximum 40.0 mm by 28.5 mm by 20.0 mm. Copper magnet wire wound on bobbin. See Enclosure ID 4-08 and ID 7-02 for construction details. Open type construction. Core, -Ferrite, overall approximately maximum 40.0 mm by 28.5 mm by 20.0 mm. Copper magnet wire wound on bobbin. See Enclosure ID 4-09 and ID 7-02 for construction details. Open type construction. Core, -Ferrite, overall approximately maximum 40.0 mm by 28.5 mm
UL
UL
UL
--
--
--
ATLAS WIRE LLC. 9525 RIVER STREET SCHILLER PARK, ILLINOIS 60176 (847) 678-1210 (847) 678-1281 FAX www.atlaswirecorp.com
Atlas Wire, LLC Registered to ISO9001 and TS16949 Schiller Park, IL 60176 Reference No. 10000854 Tucson, AZ 85714 Reference No. 10003647
MATERIAL SPECIFICATION SHEET #14 41/30 TC 1/32" PVC RoHS COMPLIANT MACHINE TOOL WIRE 600V N.E.C. STANDARD BOAT CABLE & AWM STYLES 1015 & 1230 105C – 600V OR AWM 1032 90C – 1,000V OR AWM 1013 & 1011 & 1335 90C – 600V VW-1 CSA TEW OR AWM I A/B 105C–600V FT1 CSA OIL & WATER RESISTANT 75C FT1 CSA TR-32 90c CONDUCTOR:
#14 41/30 TC 1 1/2" BUNCHED APPROXIMATE NOMINAL O.D. .075” APPROXIMATE CIRCULAR MILL AREA 4,100 WEIGHT PER THOUSAND FEET 12.80# BASIC SPECIFICATION ASTM B 174
PVC:
TEMPERATURE RATING VOLTAGE RATING ELONGATION SPECIFIC GRAVITY DUROMETER (SHORE) TENSILE STRENGTH OXYGEN INDEX BRITTLE POINT SPARK TESTED FINISHED O.D. WEIGHT PER THOUSAND FEET
USE:
INTERNAL WIRING OF APPLIANCES; OR INTERNAL WIRING OF APPLIANCES WHERE EXPOSED TO OIL AT A TEMPERATURE NOT EXCEEDING 60c.
UL1230,1335 : UL1032 : UL 1015, 1013:
MOISTURE RATING 60c. 3,500v PEAK FOR ELECTRONIC USE ONLY 2,500v PEAK FOR ELECTRONIC USE ONLY .
105c 1,000 VOLTS 330% AVG 1.32 91 (A) 2,450 PSI AVG 28 -24c 10,000 VOLTS .137" 19.10#
info@atlaswirecorp.com Revision 03/03/17
3M Worldwide : United States : Electronics Manufacturing
Solutions for Electronic Specialty Markets (ESM) Product Catalog for Electronic Specialty Markets 3M™ Electronic Specialty Markets - New Product Releases 3M™ Abrasives 3M™ Adhesives, Cleaners & Compounds 3M™ Breadboards & Test Clips 3M™ Cable & Assemblies 3M™ Copper Interconnects 3M™ Fiber Optics 3M™ Fire Protection 3M™ Heat Shrink 3M™ Identification Systems 3M™ Occupational Health & Safety Products 3M™ Protective Bumpers 3M™ Reclosable Fasteners 3M™ Splicing, Terminating & Ducting 3M™ Static Control 3M™ Tapes 3M™ Terminals, Kits & Tools 3M™ Vacuums & Accessories 3M™ Warehousing & Packaging Supplies 3M™ Wire Connectors
Product Catalog for Electronic Specialty Markets
Electrical Wire Connectors
Printer-friendly format 3M™ Scotchlok™ T-Tap Nylon Insulated Self-
Stripping Female QuickSlide Disconnect 951X, 22-18 AWG This female disconnect accepts a 22-18 AWG and has case quantities of 500.
[click to enlarge]
GTIN(UPC/EAN) : 0 00 54007 12312 5 3M Id : 80-0140-0083-2
Additional Information Use to electrically tap into a wire in mid-span without cutting or stripping the wire. Connector then mates with a .250 inch (6.35 millimeter) male tab, making a reusable quick-connect wiring termination. T-tap disconnect. Maximum insulation O.D. diameter of 0.150 inches (3,81 mm) and a operating temperature of 221°F (105°C). The suggested application tool for this connector is the E-9BM
Learn More . . . Packaging Data 3M™ Scotchlok™ SSE Tap Connectors 951, 952, 953 Data Sheet (PDF 83.2 K) 901,951,952,953 Connection Type - Illustration/Line Art (TIFF 5.2 K) Female Disconnects - T-Tap Nylon Insulated SelfStripping - Product Selection Guide (PDF 13.3 K) Ordering Information for Scotchlok™ 951 Insulation Displaceme - Product Selection Guide (HTML 1.5 K) Terminal Stud Size Chart - Product Selection Guide (PDF 5.2 K)
Full Text . . .
Please Note: Adobe® Acrobat® Reader is required to view PDF documents.
Other Tools What's New Sales Contacts U.S. Distributors
3M™ Terminals, Kits & Tools
Scotchlok™ IDC Connectors for Electrical Applications
Characteristics
Agency Approvals
UL and CSA
China RoHS - Below MCV
Yes
CSA File Number
LR32411
Scotchlok
™
Self-Stripping Electrical Tap Connectors 951, 952, 953 Data Sheet Application
Construction
Use Scotchlok™ Tap Connectors 952, 952, or 953 to electrically tap into a wire in mid-span without cutting or stripping the wire. Connector then mates with a .250” (6.35 mm) male tab, making a reusable quick-connect wiring termination.
Element - Tin plated brass, .03 in. (.8 mm) thick Insulator - Flame retardant nylon, See table for color
Wire Ranges
3M™ Crimping Tool No. E-9BM Mechanics (slip joint) Pliers
(See table for specific connector wire range) 22-12 AWG solid or stranded tinned or untinned (.5-3.0 mm sol. or str.) copper conductors. For use with common thermoplastic insulated wires such as: T, TW, TF, TFF, TFFN, THHN, AWM, TEW, SAE-GPT with a maximum wire insulation diameter of .150 inches (3.8 mm). Maximum recommended connector current: 22 AWG - 3.0 Amps 20 AWG - 4.0 Amps 18 AWG - 7.5 Amps 16 AWG - 10 Amps 14 AWG - 15 Amps 12 AWG - 20 Amps Conn.#
Color
951
RED
952
BLUE
953
YELLOW
Wire Range (AWG-mm2) 22-18 (0,5-0,8) 18-14 (0,8-2,0) 12 (3,0)
Weight lb./gm .0023 (1.04) .0023 (1,04) .0022 (1,00)
Recommended Installation Tools
Installation Instructions
WARNING Turn power off before installing or removing terminal. All electrical work should be done according to appropriate electrical codes.
1. Do not strip run wire. 2. Place run wire in open channel. 3. Fold connector body until element contacts wire. 4. Crimp connector closed with pliers. 5. Slide completed T-Tap onto male tab. Note: Tab not included. Suitable for field or factory installation. For field wiring, a suitable UL Recognized strain relief device is required.
SPECIFICATION FOR APPROVAL
Customer Description
DC FAN
Part No.
REV. AFB0524VHD
Delta Model No.
REV.
01
Sample Issue No. Sample Issue Date
NOV.12.2007
PLEASE SEND ONE COPY OF THIS SPECIFICAITON BACK AFTER YOU SIGNED APPROVAL FOR PRODUCTION PRE-ARRANGMENT. APPROVED BY: DATE
:
DELTA ELECTRONICS, INC. TAOYUAN PLANT 252, SHANG YING ROAD, KUEI SAN INDUSTRIAL ZONE TAOYUAN SHIEN, TAIWAN, R.O.C. TEL:886-(0)3-3591968 FAX:886-(0)3-3591991
DK35N
DIN Rail Terminal Blocks > Screw Connection
Date:2023-08-06Version:1.2
The web catalog is for reference only. Dinkle remains the right of product modification and engineering change of the design. The final product is made according to engineering drawing.
Product Description M6, 600V, 150A, Beige (default)
General information Short description Category Color Connection method
DIN rail terminal blocks, Feed through terminal blocks Feed through terminal blocks Beige (default) Screw connection
Type of locking
Rail mounting
Length (mm)
56.4
Width (mm)
16
Height (mm)
60.3
Number of positions
≥1P
Level Connection points
Single level 2
Material information Insulation material
PA
Insulation material group
I
Flame retardant rating , compliant with UL94
V0
TEL: +886-2-8069-9000 / E-mail: service@dinkle.com © DINKLE ENTERPRISE CO ,LTD. ALL RIGHT RESERVED
1/4
Insulation resistance
≥500MΩ at DC 500V
Connection data-IEC Rated voltage (V)
1000
Rated current (A)
125
Rated voltage (III/3)(V)
1000
Rated impulse voltage (III/3)(KV)
8
Conductor cross section solid. min (mm²)
1.5
Conductor cross section solid.max (mm²)
35
Conductor cross section stranded. min (mm²)
1.5
Conductor cross section stranded. max (mm²)
35
Conductor cross section flexible, with min ferrule without plastic sleeve (mm²)
1.5
Conductor cross section flexible, with max ferrule without plastic sleeve (mm²)
35
Conductor cross section flexible, with min ferrule with plastic sleeve (mm²)
1.5
Conductor cross section flexible, with max ferrule with plastic sleeve (mm²)
35
2 conductors with same cross section, solid, min (mm²)
1.5
2 conductors with same cross section, solid, max (mm²)
16
2 conductors with same cross section, stranded, min (mm²)
1.5
2 conductors with same cross section, stranded, max (mm²)
10
2 conductors with same cross section flexible, with min ferrule without plastic sleeve (mm²)
1.5
2 conductors with same cross section flexible, with max ferrule without plastic sleeve (mm²)
10
2 conductors with same cross section flexible, min twin ferrules with plastic sleeve (mm²)
2.5
2 conductors with same cross section flexible, max twin ferrules with plastic sleeve (mm²)
10
Screw thread
M6
Slotted screwdriver size (Blade thickness x Width)(mm)
1.0x5.5
Philips screwdriver size
PH3
Rated torque (N.m)
3.5~6.9
Recommend tightening torque. min (N.m)
3.5
Recommend tightening torque. max (N.m)
6.9
TEL: +886-2-8069-9000 / E-mail: service@dinkle.com © DINKLE ENTERPRISE CO ,LTD. ALL RIGHT RESERVED
2/4
Stripping Length (mm)
14~16
Mounting rail
TS-35
End cover plate required
NO
Grounding connections
NO
Connection data-UL Rated voltage (UL/CUL Group B)(V)
600
Rated current (UL/CUL Group B)(A)
150
Rated voltage (UL/CUL Group C)(V)
600
Rated current (UL/CUL Group C)(A)
150
Min. solid wire connection (AWG) acc. to UL/CUL
12
Max. solid wire connection AWG acc. to UL/CUL
1/0
Min. stranded wire connection AWG acc. to UL/CUL
12
Max. stranded wire connection AWG acc. to UL/CUL
1/0
Environment & Safety Back of the hand protection (YES or NO)
YES
Finger protection (YES or NO)
YES
Operating temperature. max (°C)
120
Operating temperature. min (°C)
-40
UL Recognized Wire Range (Group B)(AWG)
12~1/0
Rated voltage (Group B)(V)
600
Rated current (Group B)(A)
150
Wire Range (Group C)(AWG)
12~1/0
Rated voltage (Group C)(V)
600
Rated current (Group C)(A)
150
CUL Recognized Wire Range (Group B)(AWG)
12~1/0
Rated voltage (Group B)(V)
600
Rated current (Group B)(A)
150
Wire Range (Group C)(AWG)
12~1/0
Rated voltage (Group C)(V)
600
TEL: +886-2-8069-9000 / E-mail: service@dinkle.com © DINKLE ENTERPRISE CO ,LTD. ALL RIGHT RESERVED
3/4
Rated current (Group C)(A)
150
VDE Approval Wire Range (mm²)
4~35
Rated voltage (V)
1000
Rated current (A)
125
Drawings
Approvals
TEL: +886-2-8069-9000 / E-mail: service@dinkle.com © DINKLE ENTERPRISE CO ,LTD. ALL RIGHT RESERVED
Powered by TCPDF (www.tcpdf.org)
4/4
Regulatory Agencies
Engineering Specification
UL Listed - Tested per UL Standard 486C UL file No. E23438
Self-Stripping T-Tap Female Quick-Slide connector (as manufactured by 3M) capable of connecting to an insulated, solid or stranded copper wire, in mid-span, without cutting or stripping the wire; and of connecting to a .250 in. x.032 in. Male Tab such as a MNG14250DMI, in a separable, reusable manner, forming a Quick Connect Wiring Termination.
Voltage rated at 600 volts maximum, building wire: 1000 volts maximum, signs and fixtures. Temperature rated at 105˚C (221˚F). Note:
UL Listed for AWG only.
CSA Certified-CSA Standard C22.2 No. 0, 188-M1983 CSA File No. LR15503 Operating Temperature: 105˚C (221˚F) Voltage Rating: 600 volts max. building wire 1000 volts max. signs and luminaires. Flammability Rating: C22.2 No. 0.6 V-2
The electrical connecting element shall be tin plated brass: the insulator body shall be molded nylon, color coded to run wire size: Part Nos. 951 Red (22-18 AWG), 952 Blue (18-14 AWG), 953 yellow (12 AWG). Connector shall be UL Listed and CSA Certified for 600 volts maximum, building wire: 1000 volts maximum, signs and fixtures, and temperature rated 105˚C (221˚F) maximum.
Federal Specification W-S-610D “Commercial Packaging” Type Class Kind Style II I Cu F
Tap Connector
3M and Scotchlok are trademarks of 3M Company. is a trademark of Underwriters Laboratories. is a trademark of Canadian Standards Association.
IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted.
Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 www.3M.com/elpd
Litho in USA ©3M 2003 78-8126-5922-1-A
Data sheet Multipin terminal strip MK 2/12
Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com
Technical data Dimensions and weights Width Height Depth Weight
15 mm 86 mm 15 mm 35.66 g
Width (inches) Height (inches) Depth (inches) Net weight
0.591 inch 3.386 inch 0.591 inch 33.6 g
-50 °C
Continuous operating temp., max.
100 °C
Polyamide 66 V-2
Colour
Beige
For the mounting rails Mounting plate
End cover plate required
No
No Direct mounting
Installation advice
Direct mounting
12400-161-162-163 10 A 300 V 24 AWG
Current size B (CSA) Voltage size B (CSA) Wire cross section max. (CSA)
10 A 300 V 12 AWG
Temperatures Continuous operating temp., min.
Material data Material UL 94 flammability rating
System specifications Version Mounting rail
Additional technical data Explosion-tested version Type of mounting
CSA rating data Certificate No. (CSA) Current size D (CSA) Voltage size D (CSA) Wire cross section min. (CSA)
Conductors for clamping (rated connection) Blade size Clamping range, min. Connection cross-section, stranded, max. Connection direction Number of connections Tightening torque, min. Type of connection Wire connection cross section AWG, min. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. Wire connection cross-section, finely stranded, min. Wire connection cross-section, solid core, min.
0.6 x 3.5 mm 0.2 mm² 2.5 mm² on side 24 0.4 Nm Screw connection AWG 24 1.5 mm² 1.5 mm² 0.5 mm²
Clamping range, max. 4 mm² Clamping screw M 2.5 Connection cross-section, stranded, min. 1.5 mm² Gauge to IEC 60947-1 A2 Stripping length 5 mm Torque level with DMS electric screwdriver 1 Wire connection cross section AWG, max. AWG 12 Wire connection cross section, finely stranded, max. 2.5 mm² Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min. 0.5 mm² Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. 0.5 mm² Wire connection cross-section, solid core, max. 4 mm²
0.5 mm²
Creation date February 7, 2018 7:59:03 PM CET Catalogue status 26.01.2018 / We reserve the right to make technical changes.
2
Data sheet Multipin terminal strip MK 2/12
Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com
Technical data Rating data Rated cross-section Rated current Standards Pollution severity
2.5 mm² 24 A IEC 60947-7-1 3
Rated voltage Current at maximum wires Rated impulse withstand voltage
125 V 24 A 2.5 kV
UL rating data Certificate No. (UR) E60693 Conductor size Factory wiring min. (UR) 24 AWG Conductor size Field wiring min. (UR) 24 AWG Current size D (UR) 10 A Voltage size D (UR) 300 V
Conductor size Factory wiring max. (UR) 12 AWG Conductor size Field wiring max. (UR) 12 AWG Current size B (UR) 10 A Voltage size B (UR) 300 V
Classifications ETIM 3.0 ETIM 5.0 UNSPSC eClass 6.2 eClass 8.1 eClass 9.1
EC001284 EC001284 30-21-18-11 27-14-11-06 27-14-11-06 27-14-11-06
ETIM 4.0 ETIM 6.0 eClass 5.1 eClass 7.1 eClass 9.0
EC001284 EC001284 27-14-11-06 27-14-11-06 27-14-11-06
Approvals Approvals
ROHS
Conform
Downloads Approval/Certificate/Document of Conformity Brochure/Catalogue Engineering Data
DE_PT1411_20160418_232_ISSUE01.pdf CAT 1 TERM 16/17 EN EPLAN, WSCAD
Safety note Safety notice
Safety Information
Creation date February 7, 2018 7:59:03 PM CET Catalogue status 26.01.2018 / We reserve the right to make technical changes.
3
Data sheet Multipin terminal strip MK 2/12
Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com
Klippon® Connect with clamping yoke Technology The high reliability and variety of designs of the terminal blocks with clamping yoke connections make planning easer and optimises operational safety. Klippon® Connect provides a proven response to a range of different requirements.
General ordering data Type Order No. Version GTIN (EAN) Qty.
MK 2/12 0241260000 Multipin terminal strip, Single- and multi-pole terminal strip, Rated cross-section: 2.5 mm², Screw connection, Direct mounting 4008190026738 50 pc(s).
Creation date February 7, 2018 7:59:03 PM CET Catalogue status 26.01.2018 / We reserve the right to make technical changes.
1