Industrial catalogue design by sahar khajeh

International Pipeline

pa Our ny Co m

International-Pipeline is an international piping material procurement agent for Power, oil, Gas and Petrochemical industries. Our comprehensive range of products and services provide cost effective and efficient one stop solution for all your piping requirements. We have combined technology with our extensive hand-on industry experience and commitment to teamwork to deliver adding value products and services to our customers all around the globe. We provide total piping solution to meet and surpass our clientsâ&#x20AC;&#x2122; expectation allows our customers to focus on their core competencies enabling them to maximise their efficiency. International-Pipeline has worked hard to build a global network of international partners to ensure that our clients experience rapid deliveries, no matter where they might be on the globe. With a storage capacity of over two million square meters across our network, International Pipeline has ensured availability of vast quantity of materials to our clients. From carbon and stainless steel to super duplex and titanium materials, our products meet all the relevant standards and are available or immediate order and speedy delivery.

United as a team At International-Pipelione we believe good service starts with a exceptional team of employees, that is why at every branch we have a unique and talented team of individuals with broad range of expertise and a strong knowledge of local manufacturers. Inaddition many of our employees have been involved in the oil and gas sector many years which has equiped us with the experience and the technical knowledge that can add value for our customers.

Good Service Starts with good people. Our continous investment in our people is to make sure they deliver best customer service, first time everytime.

Tailored to Your Needs Our extensive experience and commitment to procuring a range of high-quality piping supplies has made us the preferred piping material procurement agent for Power, Oil, Gas and Petrochemical Industries worldwide. In addition to our range of stockpiled products International-Pipeline also offers customization services to our clients. Our Products can be made-to-order in our manufacturing plants in an efficient manner, due to vast stock of raw resources and semi-finished materials. our team will ensure that your order is created to meet your standard requirements.

International Pipeline

Water

Oil and Gas

Power

Petrochemical

Our business is established around four specific markets all of which are focused on fluid transportation. Other than supplying generic products that are all focused within the fluid transportation we also work with specialist suppliers that are focused only within one market which design and produce products to satisfy the industry and environmental requirements of each specific market.

International Pipeline

Pipe and Tube Fitting Flange Fastener Valve Strainer Steam Trap Expansion Joint Gasket Plates and Bar Instrument

International Pipeline

s uct od Pr

International-Pipeline provided aone-stop solution for all of your piping material requirements. Our strong procurement capability and technical know-how allow us to be the right partner for our clients. Equipped with a strong insight in every level of supply chain right from raw material production all the way to matching and testing of finished product allows us to respond to our client requirement efficiently and effectively. Our stock products have been sourced with a great care to make sure that they can withstand even the most demanding environments. Pipes, fittings, flanges and fasteners from our basic piping material stock program are accompanied with our range of valves, strainers, steam trap as well as expansion joints form our total solution piping material, additionally we supply the complete range of precision measurement instrument instruments including pressure and flow meter, tempreture and level guages. Our range of steel piping products is sourced only from carefully selected manufacturers. Our inventories contain the widest selection of low temperature, high yield and high temperature carbon steel to low alloy, stainless steel, duplex and super duplex and nickel alloys. All stock materials are ordered with enhanced purchasing specification covering the most critical applications. In addition to products with standard dimensions we also stock a large selec-tion of forging and semi-finished products for any specialised requirements or made-to-measure products you might need. Our in-house production fa-cilities provide quick turn around times, even for products with tight tolerances. We are constantly investing on improving our processes to make sure we are well equipped to supply the most demanding requirements our client have.

Commitment to Quality At International Pipeline, we take product quality very seriously. Our team of experienced experts take great care when selecting resources for our products; additionally, every manu-facturing location we use is measured against the strictest of quality control requirements. All vendor approvals are vetted through individual international pipeline service centres to ensure total quality and service standards. Customers can be confidant that all international pipeline products conform to relevant BS or international standards. Certification is available to our customers upon request. All suppliers are ISO 9001 and PED approved and regular audits are perform before implementing prod-ucts orders. Inspection includes witness testing and certification by Lloyds Register, D.N.V and SGS among other organisations. In addition to these certifications, International Pipeline has also been approved by several leading companies in the oil and gas industries as well as the nuclear industry. These companies including Shell, BP Exploration, Exxon Mobil, Total, Statoil, Aramco amongst others.

Certificates

International Pipeline

al rk

ne Gl twoob

Our global network has been established to provide us with the global presence that can add value and a competitive edge over our competitors. At International-Pipeline, we work hard to ensure that our global network provides you with the personalised customer experience. Our local offices can provide you with all the information and support you need, from your initial enquiry to your final order documentation. All of our offices have a strong presence within the local market. This means that our customers can continue to enjoy our knowledge, reliability, and superior quality, at very competitive prices all around the world. At International Pipeline, we are committed to shipping our products all over the globe. No matter where you are located International Pipeline can ship standards piping materials or custom-made orders to you via our warehouse or direct from the manufacturer itself. In addition, the export teams at International Pipeline will take care of exportation and documentation so you can get your materials as quickly and efficiently as possible.

Globally on your side At International Pipeline, we work hard to ensure that our global network pro-

International Pipeline

Brands At International-Pipeline we have established collaboration with some of the best known brands within the Power, Oil, Gas and Petrochemical industry worldwide.

Globally on your side At International Pipeline, we work hard to ensure that our global network pro-

International Pipeline

es rvic Se Whether our clients are involved in oil production, drilling or petrochemical processing we can help them source, inspect, finance and deliver highest quality products at the most competitive prices.

Procurement Through long-standing global alliances and networks, International Pipeline is able to efficiently source products and services globally from highly trusted sources. We can help our clients with cost reduction by offering best-in-class sourcing and procurement services, combined with our in-depth industry knowledge and expertise. At International Pipeline, our procurement team will negotiate daily with our suppliers to present you with the lowest possible prices that suit your requirements.

International Pipeline

Finance Doing business abroad can be at times a complicated, frustrating and risky endeavour. Having an experienced team of trade finance specialists on your side can help you ensure that your international transactions proceed faster, easier and trouble-free. We provide a full range of trade finance products and services to our clients through our global branch network. International Pipeline has been providing international trade finance for over a century. With branches around the globe we can offer you a full range of specialised international trade services â&#x20AC;&#x201C; including business financing, foreign exchange, and access to the worldâ&#x20AC;&#x2122;s largest funding sources, letters of credit and document collection. We have also assembled international teams backed by local staff. Their first-hand knowledge, skills and presence in their home market enables us to remove many of the obstacles inherent in international trade and provide you with fast and efficient global trade services, and easy access to overseas markets.

International Pipeline

Logistics Whether by sea, air or road International Pipeline has the experience and expertise to move all type of cargo with the same individual care and attention. We are proud to be able to offer our customers a first-class delivery service tailored to their needs, ensuring a smooth, hassle-free procurement experience. We provide fast, reliable and safe logistics to all of our contacts, through effective communication between all parties. In addition to organising the despatch of your goods, we offer a comprehensive range of services: Documentation Pre-shipping inspection Insurance Risk analysis. International Pipeline has proven experience in export and logistic services for clients worldwide. We fully understand that logistics planning is the key for the timely and cost-effective delivery of products, which has a major effect in the success of the project.

International Pipeline

Pre-shipping inspection from International Pipelineâ&#x20AC;&#x192; Ensure your products meet quality standards, technical specifications and contractual requrements.

Testing and inspection International Pipeline is a trusted partner for providing inspection services compliant with purchase ordering, customer and company requirements. Our inspection services team provides effective inspection, task planning, efficient testing and reporting methods and offers the assurance to our customers that the product meets their requirements. We organise, plan, execute, control and verify the product quality in accordance with customersâ&#x20AC;ş requirements and take action to identify, report, correct and prevent non-conformity.

Our pre-shimpping inspection services include: Dimensional inspection Documentation review Packing and marking checks Visual inspection Witness tests Witness sample measurements in factory Verifying the number of packing cases and marking against contractual specification Cheking for appropriate handling during loading Checking the stowing, fastening and welding on the means of transport. Technical inspection services include: Magnetic particle testing (MT) Penetrating testing (PT) Radiography testing (RT) Ultrasonic testing (UT) Eddy current testing (ET) Leak testing (LT).

International Pipeline

be tu d an pe Pi International Pipeline is specialized in supply of large variety seamless and welded pipes and tubes in a wide range of sizes and grades for oil, gas and petrochemical industry. We constantly review our stock availability to make sure we can supply our customers with minimum lead time. Seamless and Welded Pipe is available in accordance with dimensional specification ANSI/ASME B36.19M and ANSI/ ASME B36.10M materials standard ASTM A312 in grade 316/316L and 304/304L. Comprehensive stocks of seamless and welded pipe included 6 NB (8/1â&#x20AC;?) to 600 NB (16â&#x20AC;?) in SCH 10S to SCH 40S. Seamless Pipe is also available ex-stock in heavier schedules such as SCH 80, SCH 160 and XXS. Larger Sizes of both seamless and welded pipe are readily available through our worldwide network of suppliers. All pipe are fully traceable and available in 6m Lengths.

International Pipeline

n at io ifi c Sp ec

Thinking ahead

Our success comes from a very simple principle; Think ahead, we are committed to constantly review our products and services to make sure they well suited for ever expanding customers

Our tubes are dual graded 316/316L and dual specified A269/A213 to not only cover instrumentation applications but also boiler, superheater and heat ex-changer applications as well. All the tube in sizes 4/3( 4.76”) to1( 25.40”) OD inclusive are dual specified, containing % 2.5 minimum molybdenum to provide maximum corrosion protection to a maximum hardness of RB 80. Tubes Seamless to ASTM A2969, Imperial Sizes from 8/1” O/D x 24 swg to 4” O/D x 4/1” Wall in grade 316L Seamless to ASTM A2969, Grades 304L & 316L, in metric sizes 6mm O/D x 0.5mm wall to 38mm O/D x 4mm Wall Sizes from 1( 25.4”) to 50.8 mm (2”) are supplied to ASTM A269 TP316. High quality seamless tube from International Pipeline is fully certifiable and available in standard 6m lengths. PIPES Seamless and welded to ASTM A312 from 8/1” to 24” in grades 304L & 316L Seamless and Welded: ASTM A312: Seamless and straight-seam welded austenitic pipe intended for high temperature and general corrosive service. Filler metal not permitted during welding. Welded Tube: International Pipeline supplies tubes in a variety of finishes to suit customer requirements. These include “welded”, “welded Polished”, ”welded bright annealed”, “welded annealed polished” and others on request. Our standard size range covers 2/1( 12.7”) to 152.4mm (6”) OD in 1.6mm WT (16 SCH) and 203.2 mm (8”) OD in 2.00 mm WT (14 SCH). Identification: The full identification of the Pipe should be continuously marked down its whole length including: Nominal Pipe Size (Nominal Bore) Schedule (Wall thickness) Specification Grade Method of Manufacture (Seamless or Welded) Heat Number Manufacturers Name or Symbol Dimensional Standard requirements Material Standard Requirement:

International Pipeline

Types Seamless Welded

Sizes 2’’ and above

Wall Thickness 5 to xxx

Pressure Rating 150 to 2500

Material Grade Stainless Steel: A312 304/L/H, 310/H, 316/L/H, 321/H, 347/H,410, 440, 904L.

Carbon Steel: A106Gr.B/C, API 5L Gr.B.

Low Temperature: ASTM A333Gr.6/3.

Alloy Steel: A335 P1, P5, P9, P11, P12, P22, P91.

High Yield: API 5L X42, 52, 60, 65, 70.

Duplex and Super Duplex: UNS S31254, UNS S31803, UNS S32760. 31254 (6MO)

Nickel Alloys: 200, 400, 600, 625, 800, 825.

Alloys: ALLOY 20, ALLOY C, ALLOY C276, ALLOY B2.

Unusual Grades: Bronze, Brass, Copper, Cupro Nickel, Titanium, Monel 400, Inconel 600/625

Standards Dimensional: ASME ANSI B36.90, ASME ANSI B36.10,

Material: ASTM A312, ASTM A358, ASTM A249, ASTM A409, ASTM A790, ASTM A928

Made and Controlled to the relevant standards such as: ASME, ASTM, BS AND DIN/ WERKSTOFFE

Please contact thea Technical support team for addition information: Support@international-pipeline.com

International Pipeline

at a lD hn ica Te c

ASTM Pipe Size / ANSI I ASME B36.19M nominal pipe size

SCHEDULE 5S MM

SCHEDULE 10S KG/M

KG/M

SCHEDULE 40S

SCHEDULE 80S

KG/M

1/8

0.405

10.3

0.049

1.24

0.28

0.068

1.73

0.37

0.095

2.41

0.47

1/4

0.540

13.7

0.065

1.65

0.49

0.088

2.24

0.63

0.119

3.02

0.80

3/8

0.675

17.1

0.065

1.65

0.63

0.091

2.31

0.84

0.126

3.20

1.10

1/2

0.840

21.3

0.065

1.65

0.80

0.083

2.11

1.00

0.109

2.77

1.27

0.147

3.73

1.62

3/4

1.050

26.7

0.065

1.65

1.03

0.083

2.11

1.28

0.113

2.87

1.69

0.154

3.91

2.20

1.315

33.4

0.065

1.65

1.30

0.109

2.77

2.09

0.133

3.38

2.50

0.179

4.55

3.24

1 1/4

1.660

42.2

0.065

1.65

0.109

2.77

2.70

0.140

3.56

3.39

0.191

4.85

4.47

1 1/2

1.900

48.3

0.065

1.65

1.91

0.109

2.77

3.11

0.145

3.68

4.05

0.200

5.08

5.41

2.375

60.3

0.065

1.65

2.40

0.109

2.77

3.93

0.154

3.91

5.44

0.218

5.54

7.48

2 1/2

2.875

73.0

0.083

2.11

3.69

0.120

3.05

5.26

0.203

5.16

8.63

0.276

7.01

11.41

3.500

88.9

0.083

2.11

4.51

0.120

3.05

6.45

0.216

5.49

11.29

0.300

7.62

15.27

3 1/2

4.000

101.6

0.083

2.11

5.18

0.120

3.05

7.40

0.226

5.74

13.57

0.318

8.08

18.63

4.500

114.3

0.083

2.11

5.84

0.120

3.05

8.36

0.237

6.02

16.07

0.337

8.56

22.32

5.563

141.3

0.109

2.77

9.47

0.134

3.40

11.57

0.258

6.55

21.77

0.375

9.53

30.97

6.625

168.3

0.109

2.77

11.32

0.134

3.40

13.84

0.280

7.11

28.26

0.432

10.97

42.56

8.625

219.1

0.109

2.77

14.79

0.148

3.76

19.96

0.322

8.18

42.55

0.500

12.70

64.64

10.75

273.1

0.134

3.40

22.63

0.165

4.19

27.78

0.365

9.27

60.31

0.500

12.70

96.01

12.75

323.9

0.156

3.96

31.25

0.180

4.57

36.00

0.375

9.53

73.88

0.500

12.70

132.1

14.00

355.6

0.156

3.96

34.36

0.188

4.78

41.30

16.00

406.4

0.165

4.19

41.56

0.188

4.78

47.29

18.00

457

0.165

4.19

46.81

0.188

4.78

53.26

20.00

508

0.188

4.78

59.25

0.218

5.54

68.61

22.00

559

0.188

4.78

65.24

0.218

5.54

75.53

24.00

610

0.218

5.54

82.47

0.250

6.35

94.45

30.00

762

0.250

6.35

118.31

0.312

7.92

147.36

Notes: Dimensions and weights per meter - Stainless steel pipe Schedules 5S and 10S wall thickness do not allow threading in accordance with ANSI/ASME B1.20.1 Although this specification is applicable to stainless steel, quoted weights are for carbon steel pipe and should be multiplied by 1.014 for austenitic and duplex steels, or by 0.985 for ferritic and martensitic steel.

International Pipeline

ASTM Pipe Size / ANSI I ASME B36.10M nominal pipe size

OD IN

762 MM

KG/M

SCHEDULE 30

KG/M

SCHEDULE 40

KG/M

1/8

0.405

10.3

0.057

1.45

0.32

0.068

1.73

0.37

1/4

0.540

13.7

0.073

1.85

0.54

0.088

2.24

0.63

3/8

0.675

17.1

0.073

1.85

0.70

0.091

2.31

0.84

1/2

0.840

21.3

0.095

2.41

1.12

0.109

2.77

1.27

3/4

1.050

26.7

0.095

2.41

1.44

0.113

2.87

1.69

1.315

33.4

0.114

2.90

2.18

0.133

3.38

2.50

1 1/4

1.660

42.2

0.117

2.97

2.87

0.140

3.56

3.39

1 1/2

1.900

0.125

3.18

3.53

0.145

3.68

4.05

2.375

60.3

0.125

3.18

4.48

0.154

3.91

5.44

2 1/2

2.875

73.0

0.188

4.78

8.04

0.203

5.16

8.63

48.3

SCHEDULE 20

KG/M

3.500

88.9

0.188

4.78

9.92

0.216

5.49

11.29

3 1/2

4.000

101.6

0.188

4.78

11.41

0.226

5.74

13.57

4.500

114.3

0.188

4.78

12.91

0.237

6.02

16.07

5.563

168.3

0.258

6.55

21.77

6.625

219.1

0.280

7.11

28.26

8.625

273.0

0.250

6.35

0.277

7.04

36.81

0.322

8.18

42.55

10.750

323.8

0.250

6.35

41.77

0.307

7.80

51.03

0.365

9.27

60.31

12.750

355.6

0.250

6.35

49.73

0.330

8.38

65.20

0.406

10.31

79.73

14.000

406.4

0.250

6.35

54.69

0.312

7.92

67.90

0.375

9.53

81.33

0.438

11.13

94.55 123.30

33.31

16.000

457

0.250

6.35

62.64

0.312

7.92

77.83

0.375

9.53

93.27

0.500

12.70

18.000

508

0.260

6.35

70.57

0.312

7.92

87.71

0.438

11.13

122.38

0.562

14.27

155.80

20.000

559

0.250

6.35

78.55

0.375

9.53

117.15

0.500

12.70

155.12

0.594

15.09

183.42

22.000

610

0.250

6.35

86.54

0.375

9.53

129.13

0.500

12.70

171.09

24.000

660

0.250

6.35

94.53

0.375

9.53

141.12

0.562

14.27

209.64

26.000

660

0.312

7.92

127.36

0.500

12.70

202.72

28.000

711

0.312

7.92

137.32

0.500

12.70

218.69

0.625

15.88

30.000

762

0.312

7.92

147.28

0.500

12.70

234.67

0.625

15.88

0.688

17.48

255.41

271.21

292.18

Notes: Dimensions and weights per meter - steel pipe This specification is applicable to all steel pipe including stainless steel. quoted weights are for carbon steel pipe and should be multiplied by 1.014 for austenitic and duplex steel, or by 0.985 for ferritic and martensitic steels.

International Pipeline

ASTM Pipe Size / ANSI I ASME B36.10M nominal pipe size

OD IN

SCHEDULE (STD) MM

KG/M

SCHEDULE 60 IN

SCHEDULE (XS)

KG/M

SCHEDULE 80

1/8

-0.405

10.3

0.068

1.73

0.73

0.095

2.41

0.47

0.095

2.41

0.47

KG/M

1/4

0.540

13..7

0.0088

2.24

0.63

0.119

3.02

0.80

0.119

3.022

0.80

3/8

0.675

17.1

0.091

2.31

0.84

0.126

3.20

1.10

0.126

3.20

1.10

1/2

0.840

21..3

0.109

2.77

1.27

0.147

3.73

1.62

0.147

3.73

1.62

3/4

1.050

26.7

0.113

2.87

1.69

0.154

3.91

2.20

0.154

3.91

2.20

1.315

33.4

0.113

3.38

2.50

0.179

4.55

3.24

0.179

4.55

3.24

1 1/4

1.660

42.2

0.140

3.56

3.39

0.191

4.85

4.47

0.191

4.885

4.47 5.41

1 1/2

1.900

48.3

0.145

3.68

4.05

0.200

5.08

5.41

0.200

5.08

2.375

60.33

0.154

5.16

5.44

0.218

5.54

7.48

0.218

5.544

7.48

0.276

7.01

11.41

0.276

7.01

11.41

0.300

7.62

15.27

0.300

7.62

15.27

2 1/2

2.875

73.0

0.203

5..49

8.63

3.500

88.9

0.216

5.74

11.29

3 1/2

4.000

101..6

0.226

6.02

13.57

0.318

8.08

18.63

0.318

8.08

18.63

4.500

114.3

0.237

6.55

16.07

0.337

8.56

22.32

0.337

8.56

22.32

5.563

141.3

0.258

7.11

21.77

0.375

9.53

30.97

0.375

9.53

30.97

6.625

168.3

0.280

8.18

28.26

0.432

10.97

42.56

0.432

10.97

42..56

8.625

219.1

0.3322

9.27

42.55

0.41

10.31

53.08

0.500

12.70

64.64

0.500

12.70

64.64

10.75

273.0

0.365

9.53

60.31

5E-01

12.70

81.55

0.500

12.70

81.55

0.594

15..09

96.01

12.75

323.8

0.375

9.53

73.88

0.56

14.27

108.96

0.500

12.70

97.46

0.688

17.48

132.1

81.33

0.594

15.09

126.71

0.500

12.70

107.39

0.750

19.05

158.10

14.00

355.6

0.375

9.53

16.00

406.4

0..375

9.53

93.27

0.66

16.66

160.12

0.500

12.70

123.30

0.844

21.44

203.5

105.16

0.75

19.05

205.74

0.500

12.70

139.15

0.999

23.83

254.6

18.00

257

0.375

9.53

20.00

508

0.375

9.53

117.15

0.812

20.62

247.83

0.500

12.70

155.12

1.031

26.19

311.17

22.00

559

0.375

9.53

129.13

0.875

22.23

294.25

0.500

12.70

171.09

1.125

28.58

373.8

24.00

610

0.3778

9.53

141.12

0.97

24.61

355.3

0.500

12.70

187.06

1.219

30.96

442.1

0.500

12.70

202.72

26.00

660

0.375

9.53

152.87

28.00

711

0.375

9.53

164.85

0.500

12.70

2188.7

9.53

176.84

0.500

12.70

234.67

9.53

188.82

0.500

12.70

250.64

30.00

762

0.375

32.00

813

0.375

Notes: Dimensions and weights per meter - steel pipe Schedules 5S and 10S wall thickness do not allow threading in accordance with ANSI/ASME B1.20.1 Although this specification is applicable to stainless steel, quoted weights are for carbon steel pipe and should be multiplied by 1.014 for austenitic and duplex steels, or by 0.985 for ferritic and martensitic steel.

International Pipeline

ASTM Pipe Size / ANSI I ASME B36.10M nominal pipe size

SCHEDULE 100 MM

KG/M

SCHEDULE 140

SCHEDULE 160

KG/M

0.840

21.3

0.1888

4.78

1.95

3/4

1.050

26.7

0.219

5.56

2.90

1.315

33.4

0.250

6.35

4.24

11/4

1.660

42.2

0.250

6.35

5.6111

11/2

1.900

48.3

0.281

7.14

7.25

2.375

60.3

0.344

8.74

11.11

21/2

1/2

SCHEDULE 120

KG/M

2.875

73.0

0.375

9.53

14.92

3.500

88.9

0.438

11.13

21.35

31/2

4.000

101.6

4.500

114..3

0.438

11.13

28.32

0.531

13.49

33.54

5.563

141.3

0.500

12.70

40.28

0.625

15.88

49.11

0.719

6.625

168.3

14.27

54.20

18.26

67.56

8.625

219.1

0.594

15.1

75.92

0.719

18.26

90.44

0.812

20.67

100.9

0.906

23.01

111.27

10.75

273.0

0.719

18.26

114.75

0.844

21.44

133.06

1.000

25.4

155.15

1.125

28.58

172.3

12.75

323.8

0.844

21.44

159.91

1.000

25.40

186.97

1.125

28.58

208.14

1.312

33.32

283.8

14.00

355.6

0.938

23.83

194.96

1.094

27.79

224.7

1.250

31.75

253.6

1.406

35.71

281.70

16.00

406.4

1.031

26.19

245.56

1.219

30.96

286.6

1.438

36.53

333.19

1.594

40.49

365.3

0.562

18.00

457

1.1156

29.36

309.62

1.378

34.93

363.6

1.562

39.67

408.3

1.781

45.24

459.4

20.00

508

1.281

32.54

381.53

1.500

38.10

441.5

1.750

44.45

508.11

1.969

50.01

564.8

22.00

559

1.375

34.93

451.42

1.625

41.28

527.02

1.875

47.63

600.6

2.125

53.98

672.3

24.00

610

1.531

38.89

547.71

1.812

46.02

640

2.062

52.37

720.15

2.344

59.54

808.2

nominal pipe size

OD IN

Double Extra Strong MM

KG/M

nominal pipe size

Double Extra Strong MM

KG/M

1/2

0.840

21.3

0.294

7.47

2.55

2 1/2

2.875

73.0

0.552

14.02

20.39

3/4

1.050

26.7

0.308

7.82

3.64

3.500

88.9

0.600

15.24

27.68

1.315

33.4

0.358

9.09

5.45

3 1/2

4.000

101.6

1 1/4

1.660

42.2

0.382

9.70

7.7 7

4.500

114.3

0.674

17.12

41.03

1 1/2

1.900

48.3

0.400

10.15

9.56

5.563

141.3

0.750

19.05

57.43

2.375

60.3

0.436

11.07

13.44

6.625

168.3

0.864

21.95

79.22

International Pipeline

ng Fitti ed rg Fo International Pipeline supplies high quality forged fittings available in an array of classes and material grades suitable for oil, gas and petrochemical applications. Our carefully selected manufacturers take advantage of the latest technologies including the latest die sinking technology. Automated production lines and next generation machining systems deliver high volume capabilities with uncompromising quality, tested to the most stringent standards. International Pipeline offers the most comprehensive product line in the industry and an extensive inventory that makes all our products readily available, however, whenever necessary fittings can be specially manufacturer to suit customers requirements in a variety of stainless and special alloys. Making us the ideal source for the oil, gas and petrochemical industry. To complement the extensive stock range of stainless steel ANSI Pipes, Fittings and Flanges, International-Pipelines supplies a complete range of High pressure pipe fittings. We hold a large range of pipe Fittings according to ANSI B16.11 manufacturing standards in a wide range of pressure rantings. The range includes Socket Weld as well as Threaded fittings in grade including but not limited to 304L and 316L. The fittings are suitable for the application if the wall thickness of the selected is equale or less than ASME 36.10 and ASME 36.19 schedule No. or wall designation pipe wall thickness corre

International Pipeline

n at io ifi c Sp ec

Thinking ahead

Our success comes from a very simple principle; Think ahead, we are committed to constantly review our products and services to make sure they well suited for ever expanding customers

Our fittings come in variety of classes and material grades suitable for any application. Socket Weld Fittings are available in Class 3000, 6000 and 9000. Threaded fittings are avilable in classes 2000, 3000, 6000. Identification: The full identification of the Pipe should be continuously marked down its whole length including: Nominal Pipe Size (Nominal Bore) Fitting Type: Classification: Grade Method of Manufacture Connection Type: Manufacturers Name or Symbol Dimensional Standards requirements: Material Standard Requirement:

International Pipeline

Types Crosses 90° Elbow 45°Elbow Reducer Ebow Tees Reducer Tees Coupling Half couplingreducer Coupling Caps Hek Bushing Union Hex Head Plugs Round Head Plugs Swages Outlets Nipples Laterals Street Elbow Insert

Sizes 1/4” to 24”

Wall Thickness 5 to xxs

Pressure Rating 2000 lb, 3000 lb, 6000 lb, 9000 lb

Connection Socket Weld, Threaded, Seamless, Welded

Material Grade Stainless Steel: A182, F304L/H, F316L/H, F310H, F321/H, F347/H, F410, F440, 904L

Carbon Steel: A105

Low Temperature Steel: A350, LF2, LF3

Alloy Steel: A182 F1, F5, F9, F11, F12, F22, F91

High Yield: A694 F42, F52, F60, F65, F70

Duplex and Super Duplex: A182 F51, F44, UNS S32760

Nickel Alloys: 200, 400, 600, 625, 800, 825

Alloys: ALLOY 20, ALLOY C, ALLOY C276, ALLOY B2

Unusual Grades: Bronze, Brass, Copper, Cupro Nickel, Titanium, Monel 400

Standards Dimensional: ASME ANSI b16.11, BS 3799, BS1740

Material: ASTM A182

High quality Fittings all made and controlled to the relevant standard such as: ASME, ASTM, BS AND DIN/ WERKSTOFFE, ISO AND PED.

Please contact thea Technical support team for addition information: Support@international-pipeline.com

International Pipeline

at a lD hn ica So ck

W el

Fit tin

Te c

90° Elbow 1/8” - 4” In Classes: 3000, 6000, 9000

45° Elbow 1/8” - 4” In Classes: 3000, 6000, 9000

Equal Tee 1/8” - 4” In Classes: 3000, 6000, 9000

End Cap 1/8” - 4” In Classes: 3000, 6000, 9000

Half Coupling 1/8” - 4” In Classes: 3000, 6000, 9000

Full Coupling 1/8” - 4” In Classes: 3000, 6000, 9000

Cross 1/8” - 4” In Classes: 3000, 6000, 9000

International Pipeline

g Fit tin de d Th re a

90° Elbow 1/8” - 4” In Classes: 3000, 6000, 9000

45° Elbow 1/8” - 4” In Classes: 3000, 6000, 9000

Equal Tee 1/8” - 4” In Classes: 3000, 6000, 9000

End Cap 1/8” - 4” In Classes: 3000, 6000, 9000

Half Coupling 1/8” - 4” In Classes: 3000, 6000, 9000

Full Coupling 1/8” - 4” In Classes: 3000, 6000, 9000

Cross 1/8” - 4” In Classes: 3000, 6000, 9000

International Pipeline

90-Ů?deg Elbow

Cross

Tee

ASTM Pipe Size /ANSI 1 ASMEB16.11M Table 1 / Socket- Welding Fitting

Nominal Pipe Size

Socket Bare Diame ter B

[Note (1)]

1/8

1/4

3/8

1/2

3/4

1 1/4

1 1/2

2 1/2

Bare Diameter of FittingD [Note (1)]

Socket Wall Thickness, C [Note (2)]

Body Wall

Class Designation

Class Designation 3000

6000

11.2

7.6

6.8

10.8

6.1

3.2

14.6

10.0

7.1

14.2

8.5

5.6

18.0

13.3

9.9

17.6

11.8

8.4

22.2

16.6

12.5

21.8

15.0

11.0

27.6

21.7

16.3

27.2

20.2

14.8

34.3

27.4

21.5

33.9

25.9

19.9

43.1

35.8

30.2

42.7

34.3

28.7

9000

6000

3000 Avg.

Min.

9000

Avg.

Min.

3.18

3.96

3.43

3.78

3.30

4.60

4.01

3.50

5.03

7.2 5.6

4.67

4.9

5.97

5.18

9.35

8.18

4.90

4.27

6.96

6.04

9.78

8.56

6.93

11.38

9.96

7.92

6.93

12.14

10.62

8.92

7.80

12.70

10.92

9.50

13.84

11.8 10.3 16.0 14.4

5.69

4.98

23.5 22.0

6.07

5.28

28.7 27.2

6.35

38.1 37.4

6.93

49.2

41.6

34.7

48.8

40.1

33.2

61.7

53.3

43.6

61.2

51.7

42.1

74.4

64.2

73.9

61.2

90.3

79.4

89.8

76.4

115.7

103.8

115.2

100.7

5.54

6.04

7.92

4.37

Min.

Avg.

9000

Min.

2.41

3.15

3.02

3.68

3.20

3.73

4.01

9.5

7.47

9.5

5.56

7.82

12.5

6.35

9.09

12.5

6.35

9.70

12.5

11.12 5.08

7.14

10.15

12.5

12.12

8.74

11.07

16.0

7.67

9.52

8.30

10.69

9.35

6000

Min.

4.78

8.76

International Pipeline

3000

Mi. Depth of Socket J

3.91

4.55

4.85

5.54

7.01

7.62

16.0

8.56

19.0

45-Ů?deg Elbow

Coupling

Half-Coupling

Cap

ASTM Pipe Size /ANSI 1 ASMEB16.11M Table 1 / Socket- Welding Fitting (contineous) Center to Bottom of Socket. A Nominal Pipe Size

90-drg Elbow, Tees & Crosses

Laying Lengths

45-deg Elbows

Class Designation

3000

6000

9000

1/8

11.0

1/4

11.0

13.5

3/8

13.5

15.5

1/2

15.5

19.0

3/4

19.0

3000

6000

9000 -

8.0

11.0

25.5

11.0

12.5

22.5

28.5

13.0

22.5

27.0

32.0

27.0

32.0

Half Couplings Couplings E F

End Wall Thickness kmin.

Tolerances, +_

Class Designation 3000

6000

9000 -

6.5

16.0

1.0

1.5

1.0

4.8

6.4

6.5

16.0

1.0

1.5

1.0

4.8

6.4

6.5

17.5

1.5

3.0

1.5

4.8

6.4

15.5

9.5

22.5

1.5

3.0

1.5

6.4

7.9

11.2

14.0

19.0

9.5

24.0

1.5

3.0

1.5

6.4

7.9

12.7

14.0

17.5

20.5

12.5

28.5

2.0

4.0

2.0

9.6

11.2

14.2

35.0

17.5

20.5

22.5

12.5

30.0

2.0

4.0

2.0

9.6

11.2

14.2

38.0

20.5

25.5

12.5

32.0

2.0

4.0

2.0

11.2

12.7

15.7

38.0

41.0

54.0

25.5

28.5

19.0

41.0

2.0

4.0

2.0

12.7

15.7

19.0

2 1/2

41.0

28.5

19.0

43.0

2.5

5.0

2.5

19.0

57.0

19.0

44.5

2.5

5.0

2.5

19.0

22.4

19.0

48.0

2.5

5.0

2.5

22.4

28.4

1 1/4

1 1/2

66.5

32.0

41.0

15.7

Notes: Dimensions are in millimetres. Upper and lower values for each size are the respective maximum and minimum dimensions. Average of socket wall thickness around periphery shall be no less than listed values. The minimum values are permitted in localized areas.

International Pipeline

Tee

90-ِdeg Elbow

Cross

45-ِdeg Elbow

ASTM Pipe Size /ANSI 1 ASMEB16.11M Table 2 / Forged / Threated Fitting Nominal Pipe Size

Center-to-end Elbows, Teed, Crosses, A 2000

3000

1/8

1/4

3/8

1/2

3/4 1

Center-to-end 45deg Elbow C

6000

2000

3000 17

Outside diameter of Band, H

6000

2000

22 25

3000

6000

Min. Wall thickness G 2000 3.18

3000 3.18

6000

Min. Length of thread [Note(1)]

6.35

6.4

6.7

3.18

3.30

6.60

8.1

10.2

3.18

3.51

6.98

9.1

10.4

3.18

4.09

8.15

10.9

13.6

3.18

4.32

8.53

12.7

13.9

3.68

4.98

9.93

14.7

17.3

3.89

5.28

10.59

17.0

18.0

1 1/2

4.01

5.56

11.7

17.8

18.4

102

4.27

7.14

12.09

19.0

19.2

2 1/2

102

121

5.61

7.65

15.29

23.6

28.9

106

109

121

146

5.99

8.84

16.64

25.9

30.5

106

114

146

152

6.55

11.18

18.67

27.7

33.0

1 1/4

Notes: Dimensions are in millimeters Dimention B is minimum length of perfect thread. The lenght of useful thread (B plus threads with fully formed roots and flat crests) shall not be less than L2 (effective lenght of external thread) required by American National Standard for Pipe Thread (ASME B1.20.1). See para. 6.3.

International Pipeline

Half-Coupling

Coupling

Cap

ASTM Pipe Size /ANSI 1 ASMEB16.11M Table 3 / Threated Fitting Nominal Pipe Size

End-to-End Coupling W 3000

6000

End-to-End Caps P 3000

1/8

1/4

3/8 1/2 3/4

6000 -

Outside Diameter D 3000

3000

6000

16 27

Min. Wall Thickness G

[Note(1)]

6000

6.4

6.7

4.8

6.4

8.1

10.2

4.8

6.4

9.1

10.4

Min. Length of Thread

4.8

6.4

7.9

10.9

13.6

6.4

7.9

12.7

13.9

11.2

14.7

17.3

9.7

1 1/4

9.7

11.2

17.0

18.0

1 1/2

11.2

12.7

17.8

18.4

12.7

15.7

19.0

19.2

108

15.7

19.0

23.6

28.9

108

127

19.0

22.4

25.9

30.5

121

140

159

22.4

28.4

27.7

33.0

2 1/2

Notes: Dimensions are in millimeters Class 2000 and NPS 1/8 Class 6000 couplings, half couplings, and caps are not include in this Standard. The wall thickness away from the threated ends shall meet the minimum wall thickness requirements of Table 5 for the appropriate NPS and Class Designation fitting. Dimention B is minimum length of perfect thread. The lenght of useful thread (B plus threads with fully formed roots and flat crests) shall not be less than L2 (effective lenght of external thread) required by American National Standard for Pipe Thread (ASME B1.20.1). See para. 6.3. Diameters as the uniform size fitting corresponding to the largest size end connection of the reducing fitting. Concentric within a tolerance of 1.5 mm (0.06 in.) for all sizes.

International Pipeline

ng Fitti d el W tt Bu International-Pipeline Is a leading Supplier of Butt weld fittings in the Uk and West Europe. Customers from the Oil, Gas and Petrochemical Industries rely on our products and services to supply their piping material requirements, whether a local business or a large international corporation benefit from a cost-effective one stop solution for all of their piping material requirements. Our manufacturers use some of the largest cold extrusion presses in western Europe, producing professionally manufactured fittings made from metals of the highest standard. We supply cold formed butt-weld Fittings, Extruded outlets and Manifolds in Austenitic, Duplex, Super Duplex Stainless Steel, Nickel alloys, 6Moly, Titanium, Copper Nickel and various Aluminum Grades for the Oil, Gas and Petrochemical Industry. We hold a large range of Butt-weld Fittings according to Material Standard ASTM A403 Manufactured according to Manufacturing Standard ASME ANSI B16.9 in a wide range of pressure rantings. The range includes Seamless as well as welded fittings in grades including but not limited to 304L and 316L. Fittings can be specially manufactured to suit customers requirements in a variety of stainless and special alloys.

International Pipeline

n at io ifi c Sp ec

Concentric and Eccentric reducers, strain and reducing outlet tees, 45째 and 90째 elbows, Caps and stud ends are all part of the comprehensive range of butt weld fittings supplied by International-Pipeline The text coud be continued to some more sentences

International Pipeline

Types 45° Long Radius Elbows 90° Long Radius Elbow 90° Short Radius Elbow 180° Return Concentric Reducer Eccentric Reducer End Cap Equal Tees Reducing Tees Manifolds Special Pieces Swages Stud Ends Crosses Y Pieces

Sizes 1/4” to 130”

Wall Thickness 5 to xxs

Pressure Rating Up to 9000 lb

Connection Socket Weld, Threaded, Seamless, Welded

Material Grade Stainless Steel: A403WP 304/L/H, 310/H, 316/L/H, 321/H, 347/H, 410, 440, 904L

Carbon Steel: A234 WPB, WPC

Low Temperature Steel: A420 WPL6, WPL3

Alloy Steel: A234 WP1, WP5, WP9, WP11, WP12, WP22, WP91

High Yield: WPHY42, 52, 60, 65, 70

Duplex and Super Duplex: A815 UNS31803, UNS31254, UNS S32760

Nickel Alloys: 200, 400, 600, 625, 800, 825

Alloys: ALLOY 20, ALLOY C, ALLOY C276, ALLOY B2

Unusual Grades: Bronze, Brass, Copper, Cupro Nickel, Titanium

Standards Dimensional: ANSI - ASME B16.9 - B16.28 - B16.25 - BS 1640, BS 16.9, BS 1965, B16.28, MSS SP 43 & 75

Material: High quality Fittings all made and controlled to the relevantstandard s uch as: ASME, ASTM, BS AND DIN/ WERKSTOFFE, ISO AND PED.

Please contact thea Technical support team for addition information: Support@international-pipeline.com

International Pipeline

at a lD hn ica

Pi pe

Fit tin

Te c

45째 Long Radius Elbow

90째 Long Radius Elbow

90째 Short Radius Elbow

Equal Cross

180째 Long Radius Return

Straight Tee

Reducing Outlet Tee

International Pipeline

g )

Fit tin

co un tin eo us

Pi pe (

Cap

Concentric Reducer

Eccentric Reducer

Lap Joint Stud End

Reducing Outlet Crosses

Long Radius Reducing Elbow

180째 Short Radius Return

International Pipeline

ASTM Pipe/ Dimentions - ANSI / ASME 16.9 Table 1 / Dimensions of straight Tees and Crosses Nominal Pipe Size

Out side Diameter at Bevel

Run C

Outlet M

Nominal Pipe Size

[Notes (1) and (2)]

Out side Diameter at Bevel

Run C

Outlet M [Notes (1) and (2)]

1/2

0.84

1.00

18.00

13.50

3/4

1.05

1.12

20.00

15.00

1.32

1.500

22.00

16.50

1 1/4

1.66

1.88

24.000

17.00

1 1/2

1.90

2.25

26.00

19.550

2.38

2.50

28.00

20.50

2 1/2

2.88

3.00

30.00

22.000

3.550

3.38

32.00

23.50

3 1/2

4.00

3.75

34.00

25.00

4.50

4.12

36.00

26.50

5.56

4.88

38.00

28.00

6.62

5.62

40.000

29.50

8.62

7.00

42.00

30.00

10.75

8.50

44.000

32.00

12.75

10.00

46.00

33.50

14.00

11.00

48.00

35.00

16.00

12.00

Notes: All dimensions are in inches. steel pipe Outlet Dimension M for NPS 26 and larger is recommended but not required. Dimensions applicable to crosses NPS 24 and Smaller

International Pipeline

ASTM Pipe/ Dimentions - ANSI / ASME 16.9 Table 2 / Dimentions of reducing Outlet tees and Reducing Outlet Crosses Nominal Pipe Size

OD at Bevel Run C

Outlet

Run C

Nominal Pipe Size

Outlet M

OD at Bevel Run C

Outlet

Run C

Outlet M

1/2 x 1/2 x 3/8

0.84

0.68

1.00

4x4x3

4.50

3.50

4.12

3.88

1/2 x 1/2 x 1/4

0.84

0.54

1.00

4 x 4 x 2 1/2

4.50

2.88

4.12

3.75

3/4 x 3/4 x 1/2

1.05

0.84

1.12

4x4x2

4.50

2.38

4.12

3.50

3/4 x 3/4 x 3/8

1.32

1.05

1.50

1.12

4 x 4 x 1 1/2

4.50

1.90

4.12

3.38

1 x 1 x 3/4

1.32

0.84

1.50

5x5x4

5.56

4.50

4.88

4.62

1 x 1 x 1/2

1.66

1.32

1.88

1.50

5 x 5 x 3 1/2

5.56

4.00

4.88

4.50

1 1/4 x 1 1/4 x 1

1.66

1.05

1.88

5x5x3

5.56

3.50

4.88

4.38

1 1/4 x 1 1/4 x 3/4

1.66

0.84

1.88

5 x 5 x 2 1/2

5.56

2.88

4.88

4.25

1 1/4 x 1 1/4 x 1/2

1.90

1.66

2.25

1.88

5x5x2

5.56

2.38

4.88

4.12

1 1/2 x 1 1/2 x 1 1/4

1.90

1.32

2.25

6x6x5

6.62

5.56

5.62

5.38

1 1/2 x 1 1/2 x 1

1.90

1.05

2.25

6x6x4

6.62

4.50

5.62

5.12

1 1/2 x 1 1/2 x 3/4

1.90

0.84

2.25

6 x 6 x 3 1/2

6.62

4.00

5.62

5.00

1 1/2 x 1 1/2 x 1/2

2.38

1.90

2.50

2.25

6x6x3

6.62

3.50

5.62

4.88

2 x 2 x 1 1/2

2.38

1.66

2.50

2.38

6 x 6 x 2 1/2

6.62

2.88

5.62

4.75

2 x 2 x 1 1/4

2.38

1.32

2.50

2.25

8x8x6

8.62

6.62

7.00

6.62

2x2x1

2.38

1.32

2.50

2.00

8x8x5

8.62

5.56

7.00

6.38

2 x 2 x 3/4

2.38

1.05

2.50

1.75

8x8x4

8.62

4.50

7.00

6.12

7.00

6.00

2 1/2 x 2 1/2 x 2

2.88

2.38

3.00

2.75

8 x 8 x 3 1/2

2 1/2 x 2 1/2 x 1 1/2

2.88

1.90

3.00

2.62

10 x 10 x 8

10.75

8.62

4.00 8.62

8.50

8.00

2 1/2 x 2 1/2 x 1 1/4

2.88

1.66

3.00

2.50

10 x 10 x 6

10.75

6.62

8.50

7.62

2 1/2 x 2 1/2 x 1

2.88

1.32

3.00

2.25

10 x 10 x 5

10.75

5.56

8.50

7.50

3 x 3 x 2 1/2

3.50

2.88

3.38

3.25

10 x 10 x 4

10.75

4.50

8.50

7.25

3x3x2

3.50

2.38

3.38

3.00

12 x 12 x 10

12.75

10.75

10.00

3 x 3 x 1 1/2

3.50

1.90

3.38

2.88

12 x 12 x 8

12.75

8.62

10.00

9.00

3 x 3 x 1 1/4

3.50

1.66

3.38

2.75

12 x 12 x 6

12.75

6.62

10.00

8.62

3 1/2 x 3 1/2 x 3

4.00

3.50

3.75

3.62

12 x 12 x 5

12.75

10.00

8.50

3 1/2 x 3 1/2 x 2 1/2

4.00

2.88

3.75

3.50

14 x 14 x 12

14.00

12.75

11.00

10.62

5.56

9.50

3 1/2 x 3 1/2 x 2

4.00

2.38

3.75

3.25

14 x 14 x 10

14.00

10.75

11.00

10.12

3 1/2 x 3 1/2 x 1 1/2

4.00

1.90

3.75

3.12

14 x 14 x 8

14.00

8.62

11.00

9.75

4 x 4 x 3 1/2

4.50

4.00

4.12

4.00

14 x 14 x 6

14.00

11.00

9.38

6.62

To be continued

International Pipeline

Nominal Pipe Size 16 x 16 x 14 16 x 16 x 12

OD at Bevel Run C

Outlet

16.00

14.00

16.00

Run C 12.00

Nominal Pipe Size

Outlet M 12.00 11.62

30 x 30 x 26

OD at Bevel Run C

Outlet

30.00

26.00

Run C 22.00

Outlet M 21.50

12.75

12.00

30 x 30 x 24

30.00

24.00

16 x 16 x 10

16.00

10.75

12.00

11.12

30 x 30 x 22

30.00

22.00

20.50

16 x 16 x 8

16.00

8.62

12.00

10.75

30 x 30 x 20

30.00

20.00

22.00

20.00

22.00

21.00

16 x 16 x 6

16.00

6.62

12.00

10.38

30 x 30 x 18

30.00

18.00

22.00

19.50

18 x 18 x 16

18.00

16.00

13.50

13.00

30 x 30 x 16

30.00

16.00

22.00

19.00

18 x 18 x 14

18.00

14.00

13.50

13.00

30 x 30 x 14

30.00

14.00

22.00

19.00

18 x 18 x 12

18.00

12.75

13.50

12.62

30 x 30 x 12

30.00

12.75

22.00

18.62

18 x 18 x 10

18.00

10.75

13.50

12.12

30 x 30 x 10

30.00

10.75

22.00

18.12

18 x 18 x 8

18.00

8.62

13.50

11.75

32 x 32 x 30

32.00

30.00

23.50

23.00

20 x 20 x 18

20.00

18.00

15.00

14.50

32 x 32 x 28

32.00

28.00

23.50

22.50

20 x 20 x 16

20.00

16.00

15.00

14.00

32 x 32 x 26

32.00

26.00

23.50

22.50

20 x 20 x 14

20.00

14.00

15.00

14.00

32 x 32 x 24

32.00

24.00

23.50

22.00

20 x 20 x 12

20.00

12.75

15.00

13.62

32 x 32 x 22

32.00

22.00

23.50

21.50

20 x 20 x 10

20.00

10.75

15.00

13.12

32 x 32 x 20

32.00

20.00

23.50

21.00

20 x 20 x 8

20.00

8.62

15.00

12.75

32 x 32 x 18

32.00

18.00

23.50

20.50

22 x 22 x 20

22.00

32 x 32 x 16

32.00

16.00

23.50

20.00

16.50

16.00

22.00

18.00

16.50

15.50

32 x 32 x 14

32.00

14.00

23.50

20.00

22 x 22 x 16

22.00

16.00

16.50

15.00

34 x 34 x 32

34.00

32.00

25.00

24.50

22 x 22 x 14

22.00

16.50

15.00

34 x 34 x 30

34.00

30.00

25.00

24.00

22 x 22 x 12

22.00

16.50

14.62

34 x 34 x 28

34.00

28.00

25.00

23.50

22 x 22 x 18

14.00 12.75

22 x 22 x 10

22.00

10.75

16.50

14.12

34 x 34 x 26

34.00

26.00

25.00

23.50

24 x 24 x 22

24.00

22.00

17.00

34 x 34 x 24

34.00

24.00

25.00

23.00

24 x 24 x 20

24.00

20.00

17.00

34 x 34 x 22

34.00

22.00

25.00

22.50

24 x 24 x 18

24.00

18.00

17.00

16.50

34 x 34 x 20

34.00

20.00

25.00

22.00

24 x 24 x 16

24.00

16.00

17.00

16.00

34 x 34 x 18

34.00

18.00

25.00

21.50

24 x 24 x 14

24.00

14.00

17.00

16.00

34 x 34 x 16

34.00

16.00

25.00

21.00

24 x 24 x 12

24.00

12.75

17.00

15.62

36 x 36 x 34

36.00

34.00

26.50

26.00

24 x 24 x 10

24.00

10.75

17.00

15.12

36 x 36 x 32

36.00

32.00

26.50

25.50

26 x 26 x 24

26.00

24.00

19.50

19.00

36 x 36 x 30

36.00

30.00

26.50

25.00

26 x 26 x 22

26.00

22.00

19.50

18.50

36 x 36 x 28

36.00

28.00

26.50

24.50

26 x 26 x 20

26.00

20.00

19.50

18.00

36 x 36 x 26

36.00

26.00

26.50

24.50

26 x 26 x 18

26.00

18.00

19.50

17.50

36 x 36 x 24

36.00

24.00

26.50

24.00

26 x 26 x 16

26.00

16.00

19.50

17.00

36 x 36 x 22

36.00

22.00

26.50

23.50

26 x 26 x 14

26.00

14.00

19.50

17.00

36 x 36 x 20

36.00

26 x 26 x 12

26.00

12.75

19.50

16.62

36 x 36 x 18

36.00

20.00 18.00

26.50

23.00

26.50

22.50

28 x 28 x 26

28.00

26.00

20.50

36 x 36 x 16

36.00

16.00

26.50

22.00

28 x 28 x 24

28.00

24.00

20.50

20.00

38 x 38 x 36

38.00

36.00

28.00

28 x 28 x 22

28.00

22.00

20.50

27.50

19.50

38 x 38 x 34

38.00

34.00

28.00

28 x 28 x 20

28.00

20.00

20.50

19.00

38 x 38 x 32

38.00

32.00

28.00

27.00

28 x 28 x 18

28.00

18.00

20.50

18.50

38 x 38 x 30

38.00

30.00

28.00

26.50

28 x 28 x 16

28.00

16.00

20.50

18.00

38 x 38 x 28

38.00

28.00

25.50

28 x 28 x 14

28.00

14.00

20.50

18.00

38 x 38 x 26

38.00

26.00

28.00

25.50

28 x 28 x 12

28.00

12.75

20.50

17.62

38 x 38 x 24

38.00

24.00

28.00

25.00

30 x 30 x 28

30.00

28.00

22.00

21.50

38 x 38 x 22

38.00

22.00

28.00

24.50

To be continued

International Pipeline

Nominal Pipe Size

OD at Bevel Run C

38 x 38 x 20

38.00

38 x 38 x 18 40 x 40 x 38 40 x 40 x 36

Outlet

Run C

Nominal Pipe Size

Outlet M

OD at Bevel Run C

Outlet

Run C

Outlet M

20.00

28.00

24.00

44 x 44 x 30

44.00

30.00

32.00

28.00

38.00

18.00

28.00

23.50

44 x 44 x 28

44.00

28.00

32.00

27.50

40.00

38.00

29.50

44 x 44 x 26

44.00

26.00

32.00

27.50

44 x 44 x 24

44.00

24.00

32.00

27.50

40.00

36.00

29.50

29.00

40 x 40 x 34

40.00

34.00

29.50

28.50

44 x 44 x 22

44.00

22.00

32.00

27.00

40 x 40 x 32

40.00

32.00

29.50

28.00

44 x 44 x 20

44.00

20.00

32.00

27.00

40 x 40 x 30

40.00

30.00

29.50

27.50

46 x 46 x 44

46.00

44.00

33.50

31.50

40 x 40 x 28

40.00

28.00

29.50

26.50

46 x 46 x 42

46.00

42.00

33.50

31.00

40 x 40 x 26

40.00

26.00

29.50

26.50

46 x 46 x 40

46.00

40.00

33.50

30.50

40 x 40 x 24

40.00

24.00

29.50

26.00

46 x 46 x 38

46.00

38.00

33.50

30.00

40 x 40 x 22

40.00

22.00

29.50

25.50

46 x 46 x 36

46.00

36.00

33.50

30.00

40 x 40 x 20

40.00

20.00

29.50

25.00

46 x 46 x 34

46.00

34.00

33.50

29.50

40 x 40 x 18

40.00

18.00

29.50

24.50

46 x 46 x 32

46.00

32.00

33.50

29.50

42 x 42 x 40

42.00

40.00

30.00

28.00

46 x 46 x 30

46.00

30.00

33.50

29.00

42 x 42 x 38

42.00

38.00

30.00

28.00

46 x 46 x 28

46.00

28.00

33.50

29.00

42 x 42 x 36

42.00

36.00

30.00

28.00

46 x 46 x 26

46.00

26.00

33.50

29.00

42 x 42 x 34

42.00

34.00

30.00

28.00

46 x 46 x 24

46.00

24.00

33.50

28.50

42 x 42 x 32

42.00

32.00

30.00

28.00

46 x 46 x 22

46.00

22.00

33.50

28.50

42 x 42 x 30

42.00

30.00

28.00

48 x 48 x 46

48.00

46.00

35.00

33.00

42 x 42 x 28

42.00

28.00

30.00

27.50

48 x 48 x 44

48.00

44.00

35.00

33.00

42 x 42 x 26

42.00

26.00

30.00

27.50

48 x 48 x 42

48.00

42.00

35.00

32.00

42 x 42 x 24

42.00

24.00

30.00

26.00

48 x 48 x 40

48.00

40.00

35.00

32.00

42 x 42 x 22

42.00

22.00

30.00

26.00

48 x 48 x 38

48.00

38.00

35.00

32.00

42 x 42 x 20

42.00

20.00

30.00

26.00

48 x 48 x 36

48.00

36.00

35.00

31.00

42 x 42 x 18

42.00

18.00

30.00

25.50

48 x 48 x 34

48.00

34.00

35.00

31.00

42 x 42 x 16

42.00

16.00

30.00

25.00

48 x 48 x 32

48.00

32.00

35.00

31.00

44 x 44 x 42

44.00

42.00

32.00

30.00

48 x 48 x 30

48.00

30.00

35.00

30.00

44 x 44 x 40

44.00

40.00

32.00

29.50

48 x 48 x 28

48.00

28.00

35.00

30.00

44 x 44 x 38

44.00

38.00

32.00

29.00

48 x 48 x 26

48.00

26.00

35.00

30.00

44 x 44 x 36

44.00

36.00

32.00

28.50

48 x 48 x 24

48.00

24.00

35.00

29.00

44 x 44 x 34

44.00

34.00

32.00

28.50

48 x 48 x 22

48.00

22.00

35.00

29.00

44 x 44 x 32

44.00

32.00

28.00

Notes: All dimensions are in inches. Outlet Dimension M for run Sizes 14 and larger is recommended but not required.

International Pipeline

ASTM Pipe/ Dimentions - ANSI / ASME 16.9 Table 3 / Dimensions of Long Radius Elbows Nominal Pipe Size

Out side Diameter at Bevel

90째 Elbow

45째 Elbow

Nominal Pipe Size

Out side Diameter at Bevel

90째 Elbow

45째 Elbow

1/2

0.84

1.50

0.62

18.00

27.00

11.25

3/4

1.05

1.50

0.75

20.00

30.00

12.50

1.32

1.50

0.88

22.00

33.00

13.50

1 1/4

1.66

1.88

1.00

24.000

36.00

15.00

1 1/2

1.90

2.25

1.12

26.00

39.00

16.00

2.38

3.00

1.38

28.00

42.00

17.25

2 1/2

2.88

3.75

1.75

30.00

45.00

18.50

3.550

4.50

2.00

32.00

48.00

19.75

3 1/2

4.00

5.25

2.25

34..00

51.00

21.00

4.50

6.00

2.50

36.00

54.00

22.25

5.56

7.50

3.12

38.00

57.00

23.62

6.62

9.00

3.75

40.000

60.00

24.88

8.62

12.00

5.00

42.00

63.00

26.00

10.75

15.00

6.25

44.000

66.00

27.38

12.75

18.00

7.50

46.00

69.00

28.62

14.00

21.00

8.75

48.00

72.00

29.88

16.00

24.00

10.00

Notes: All dimensions are in inches.

International Pipeline

ASTM Pipe/ Dimentions - ANSI / ASME 16.9 Table 4 / Dimensions of Short Radius Elbows Nominal Pipe Size (NPS)

Out side Diameter at Bevel

Center to End A

Nominal Pipe Size (NPS)

Out side Diameter at Bevel

Center to End A

1.32

1.00

8.62

8.00

1 1/4

1.66

1.25

10.75

10.00

1 1/2

1.90

1.50

12.75

12.00

2.38

2.00

14.00

2 1/2

2.88

2.50

16.00

3.50

3.00

18.00

3 1/2

4.00

3.50

20.00

4.50

4.00

22.00

5.56

5.00

24.00

6.62

6.00

Notes: All dimensions are in inches.

International Pipeline

ASTM Pipe/ Dimentions - ANSI / ASME 16.9 Table 5 / Dimensions of Long Radius Reducing Elbows Nominal Pipe Size (NPS)

Large End

2 x 1 1/2

2.38

1.90

3.00

8x5

8.62

5.56

12.00

2 x 1 1/4

2.38

1.66

3.00

8x4

8.62

4.50

12.00

2.38

2x1

OD at Bevel Small End

Center to End A

Nominal Pipe Size (NPS)

OD at Bevel Large End

Small End

Center to End A

1.32

3.00

10 x 8

10.75

8.62

15.00

2 1/2 x 2

2.88

2.38

3.75

10 x 6

10.75

6.62

15.00

2 1/2 x 1 1/2

2.88

1.90

3.75

10 x 5

10.75

5.56

15.00

2 1/2 x 1 1/4

2.88

1.66

3.75

12 x 10

12.75

10.75

18.00

3 x 2 1/2

3.50

2.88

4.50

12 x 8

12.75

8.62

18.00

3x2

3.50

2.38

4.50

12 x 6

12.75

6.62

18.00

3 x 1 1/2

3.50

1.90

4.50

14 x 12

14.00

12.75

21.00

3 1/2 x 3

4.00

3.50

5.25

14 x 10

14.00

10.75

21.00

3 1/2 x 2 1/2

4.00

2.88

5.25

14 x 8

14.00

8.62

21.00

3 1/2 x 2

4.00

2.38

5.25

16 x 14

16.00

14.00

24.00

16.00

12.75

24.00

4 x 3 1/2

4.50

4.00

6.00

16 x 12

4x3

4.50

3.50

6.00

16 x 10

16.00

10.75

24.00

4 x 2 1/2

4.50

2.88

6.00

18 x 16

18.00

16.00

27.00

4x2

4.50

2.38

6.00

18 x 14

18.00

14.00

27.00

5x4

5.56

4.50

7.50

18 x 12

18.00

12.75

27.00

5 x 3 1/2

5.56

4.00

7.50

18 x 10

18.00

10.75

27.00

5x3

5.56

3.50

7.50

20 x 18

20.00

18.00

30.00

5 x 2 1/2

5.56

2.88

7.50

20 x 16

20.00

16.00

30.00

6x5

6.62

5.56

9.00

20 x 14

20.00

14.00

30.00

6x4

6.62

4.50

9.00

20 x 12

20.00

12.75

30.00

6 x 3 1/2

6.62

4.00

9.00

20 x 10

20.00

10.75

30.00

6x3

6.62

3.50

9.00

24 x 22

24.00

22.00

36.00

8x6

8.62

6.62

12.00

Notes: All dimensions are in inches.

International Pipeline

Short Radius 180°Return

Long Radius Return

ASTM Pipe/ Dimentions - ANSI / ASME 16.9 Table 6 / Dimensions of Reduce Return Short Radius 180°Return

Long Radius Return Nominal Pipe Size (NPS) 1/2 3/4 [Note (2)]

Outside Diameter at Bevel 0.84

O 3.00

Nominal Pipe Size (NPS)

Outside Diameter at Bevel

1.88

1.05

3.00

2.00

1.32

3.00

2.19

1.32

2.00

1.62

1 1/4

1.66

3.75

2.75

1 1/4

1.66

2.50

2.06

1 1/2

1.90

4.50

3.25

1 1/2

1.90

3.00

2.44

2.38

6.00

4.19

2.38

4.00

3.19

2 1/2

2.88

7.50

5.19

2 1/2

2.88

5.00

3.94

3.50

9.00

6.25

3.50

6.00

4.75

3 1/2

4.00

10.50

7.25

3 1/2

4.00

7.00

5.50

4.50

12.00

8.25

4.50

8.00

6.25

5.65

15.00

10.31

5.56

10.00

7.75

6.62

18.00

12.31

6.62

12.00

9.31

8.62

24.00

16.31

8.62

16.00

12.31

10.75

30.00

20.38

10.75

20.00

15.38

12.75

36.00

24.38

12.75

24.00

18.38

14.00

42.00

28.00

14.00

28.00

21.00

16.00

48.00

32.00

16.00

32.00

24.00

18.00

54.00

36.00

18.00

36.00

27.00

20.00

60.00

40.00

20.00

40.00

30.00

22.00

66.00

44.00

22.00

44.00

33.00

24.00

72.00

48.00

24.00

48.00

36.00

Notes: All dimensions are in inches. Dimension A is equal to one-half of dimension O. O and K dimensions of 2.25” and 1.69” respectively may be furnished for NPS 3/4 at the manufacturers’s option.

International Pipeline

Inlarged section of Lap

ASTM Pipe/ Dimentions - ANSI / ASME 16.9 Table 7 / Dimensions of Lap Joint Stud Ends Nominal Pipe Size (NPS)

OD at Bevel MAX

MIN

Long Patern Lenght F

Short Patern Lenght F

Radius of filet R

Diameter of lap G

1/2

0.869

0.809

3.00

2.00

0.12

1.38

3/4

1.106

1.019

3.00

2.00

0.12

1.69

1.376

1.284

4.00

2.00

0.12

2.00

1 1/4

1.716

1.629

4.00

2.00

0.19

2.50

1 1/2

1.965

1.869

4.00

2.00

0.25

2.88

2.456

2.344

6.00

2.50

0.31

3.62

2 1/2

2.966

2.844

6.00

2.50

0.31

4.12

3.596

3.469

6.00

2.50

0.38

5.00

3 1/2

4.096

3.969

6.00

3.00

0.38

5.50

4.593

4.469

6.00

3.00

0.44

6.19

5.683

5.532

8.00

3.00

0.44

7.31

6.743

6.594

8.00

3.50

0.50

8.50

8.743

8.594

8.00

4.00

0.50

10.62

10.913

10.719

10.00

5.00

0.50

12.75

12.913

12.719

10.00

6.00

0.50

15.00

14.170

13.969

12.00

6.00

0.50

16.25

16.180

15.969

12.00

6.00

0.50

18.50

18.190

17.969

12.00

6.00

0.50

21.00

20.240

19.969

12.00

6.00

0.50

23.00

22.240

21.969

12.00

6.00

0.50

25.25

24.240

23.969

12.00

6.00

0.50

27.25

Notes: All dimensions are in inches. Service conditions and joint construction often dictate stub end length requirements. Therefore, the purchaser must specify long or short pattern fitting when ordering. Gasket face finish shall be in actcordance with ASME 16.5 for raised face flanges.

International Pipeline

ASTM Pipe/ Dimentions - ANSI / ASME 16.9 Table 8 / Dimensions of Caps Outside Diameter at Bevel 18.00

Outside Diameter at Bevel 0.84

1.00

0.18

1.00

8.00

0.50

9.00

3/4

1.05

1.00

0.15

1.00

20.00

9.00

0.50

10.00

1.32

1.50

0.18

1.50

22.00

10.00

0.50

10.00

1 1/4

1.66

1.50

0.19

1.50

24.00

10.50

0.50

12.00

1 1/2

1.90

1.50

0.20

1.50

26.00

10.50

2.38

1.50

0.22

1.75

28.00

10.50

Nominal Pipe Size (NPS) 1/2

Lenght E

Thickness E

Lenght E1

Nominal Pipe Size (NPS) 18

Lenght E

2 1/2

2.88

1.50

0.28

2.00

30.00

10.50

3.50

2.00

0.30

2.50

32.00

10.50

3 1/2

4.00

2.50

0.32

3.00

34.00

10.50

4.50

2.50

0.34

3.00

36.00

10.50

5.56

3.00

0.38

3.50

38.00

12.00

6.62

3.50

0.43

4.00

40.00

12.00

8.62

4.00

0.50

5.00

42.00

12.00

10.75

5.00

0.50

6.00

44.00

13.50

12.75

6.00

0.50

7.00

46.00

13.50

14.00

6.50

0.50

7.50

48.00

13.50

16.00

7.00

0.50

Thickness E

Lenght E1

8.00

Notes: All dimensions are in inches. The Shape of these caps should be ellipsoidal and shall conform to the shape requirements as given in the ASME boiler and pressure vessel Code. Length E applies for thickness not exceeding that given in column “Limiting Wall Thickness for Length, E”. Length E1 applies for thickness greater than that given in column “Limiting Wall Thickness” for NPS 24 and Smaller. For NPS 26 and larger, length E1 shall be by arrangement between the manufacturer and purchaser.

International Pipeline

ASTM Pipe/ Dimentions - ANSI / ASME 16.9 Table 9 / Dimensions of Reducer Nominal Pipe Size (NPS)

OD at Bevel Small End

End to End H

Nominal Pipe Size (NPS)

Large End

OD at Bevel Large End

Small End

End to End H

3/4 x 1/2

1.05

0.84

1.50

4 x 2 1/2

4.50

2.88

4.00

3/4 x 3/8

1.05

0.68

1.50

4x2

4.50

2.38

4.00

1 x 3/4

1.32

1.05

2.00

4 x 1 1/2

4.50

1.90

4.00

1 x 1/2

1.32

0.84

2.00

5x4

5.56

4.50

5.00

1 1/4 x 1

1.66

1.32

2.00

5 x 3 1/2

5.56

4.00

5.00

1 1/4 x 3/4

1.66

1.05

2.00

5x3

5.56

3.50

5.00

1 1/4 x 1/2

1.66

0.84

2.00

5 x 2 1/2

5.56

2.88

5.00

1 1/2 x 1 1/4

1.90

1.66

2.50

5x2

5.56

2.38

5.00

1 1/2 x 1

1.90

1.32

2.50

6x5

6.62

5.56

5.50

1 1/2 x 3/4

1.90

1.05

2.50

6x4

6.62

4.50

5.50

1 1/2 x 1/2

1.90

0.84

2.50

6 x 3 1/2

6.62

4.00

5.50

2 x 1 1/2

2.38

1.90

3.00

6x3

6.62

3.50

5.50

2 x 1 1/4

2.38

1.66

3.00

6 x 2 1/2

6.62

2.88

5.50

2x1

2.38

1.32

3.00

8x6

8.62

6.62

6.00

2 x 3/4

2.38

1.05

3.00

8x5

8.62

5.56

6.00

2 1/2 x 2

2.88

2.38

3.50

8x4

8.62

4.50

6.00

2 1/2 x 1 1/2

2.88

1.90

3.50

8 x 3 1/2

8.62

4.00

6.00

2 1/2 x 1 1/4

2.88

1.66

3.50

10 x 8

10.75

8.62

7.00

2 1/2 x 1

2.88

1.32

3.50

10 x 6

10.75

6.62

7.00

3 x 2 1/2

3.50

2.88

3.50

10 x 5

10.75

5.56

7.00

3x2

3.50

2.38

3.50

10 x 4

10.75

4.50

7.00

3 x 1 1/2

3.50

1.90

3.50

12 x 10

12.75

10.75

8.00

8.62

8.00

6.62

8.00

3 x 1 1/4

3.50

1.66

3.50

12 x 8

12.75

3 1/2 x 3

4.00

3.50

4.00

12 x 6

12.75

3 1/2 x 2 1/2

4.00

2.88

4.00

12 x 5

12.75

5.56

8.00

3 1/2 x 2

4.00

2.38

4.00

14 x 12

14.00

12.75

13.00

3 1/2 x 1 1/2

4.00

1.90

4.00

14 x 10

14.00

10.75

13.00

3 1/2 x 1 1/4

4.00

1.66

4.00

14 x 8

14.00

8.62

13.00

4 x 3 1/2

4.50

4.00

14 x 6

14.00

6.62

13.00

4x3

4.50

3.50

4.00

16 x 14

16.00

14.00

To be continued

International Pipeline

Nominal Pipe Size (NPS)

OD at Bevel Large End

Small End

End to End H

Nominal Pipe Size (NPS)

OD at Bevel Large End

Small End

End to End H

16 x 12

16.00

12.75

14.00

26 x 18

26.00

18.00

24.00

16 x 10

16.00

10.75

14.00

28 x 26

28.00

26.00

24.00

16 x 8

16.00

8.62

14.00

28 x 24

28.00

24.00

18 x 16

18.00

16.00

15.00

28 x 20

28.00

20.00

24.00

18 x 14

18.00

14.00

15.00

28 x 18

28.00

18.00

24.00

18 x 12

18.00

12.75

15.00

30 x 28

30.00

28.00

24.00

18 x 10

18.00

10.75

15.00

30 x 26

30.00

26.00

24.00

20 x 18

20.00

18.00

20.00

30 x 24

30.00

24.00

20 x 16

20.00

16.00

20.00

30 x 20

30.00

20.00

24.00

20 x 14

20.00

14.00

20.00

32 x 30

32.00

30.00

24.00

20 x 12

20.00

12.75

20.00

32 x 28

32.00

28.00

24.00

32.00

26.00

24.00

22 x 20

22.00

20.00

32 x 26

22 x 18

22.00

18.00

20.00

32 x 24

32.00

24.00

22 x 16

22.00

16.00

20.00

34 x 32

34.00

32.00

24.00

22 x 14

22.00

14.00

20.00

34 x 30

34.00

30.00

24.00

24 x 22

24.00

22.00

20.00

34 x 26

34.00

26.00

24.00

24 x 20

24.00

20.00

34 x 24

34.00

24.00

24 x 18

24.00

18.00

20.00

36 x 34

36.00

34.00

24.00

24 x 16

24.00

16.00

20.00

36 x 32

36.00

32.00

24.00

26 x 24

26.00

24.00

36 x 30

36.00

30.00

24.00

26 x 22

26.00

22.00

24.00

36 x 26

36.00

26.00

24.00

26 x 20

26.00

20.00

24.00

Notes: All dimensions are in inches. while the figure illustrated a bell-shaped reducer, the use of conical reducer is not prohibited

International Pipeline

s ge an Fl Mauris egestas lacus sit ame Vivamus pulvinar, purus ultricies ultrices ullamcorper, dolor diam euismod nisl, vel consectetuer eros mi sit amet lorem. â&#x20AC;˘ Quisque Massa

International Pipeline

n at io ifi c Sp ec

A flange is is designed to connect sections of pipe or tube, or to join the pipe or tube to an assembly such as a pressure vessel valve or pump. Flanges are joined by bolting, and sealing is completed with the use of gaskets and other sealing methods, and fixed to the piping system by welding or threading. A flange is is designed to connect sections of pipe or tube, or to join thepipe or tube to an assembly such as a pressure vessel valve or pump. Flanges are joined by bolting, and sealing is completed with the use of gaskets and other sealing methods, and fixed to the piping system by welding or threading. Larger sizes are available through our worldwide network of quality approved mills and stockiest.Standard Stocks include 304L and 316L stainless steel, With Many other materials available on request including, Low temperature steel, High yield steel, Duplex and Super Duplex and nickel alloys.

International Pipeline

Types Weld Neck Blind Slip-on Lap Joint Theaded Socket Welding Reducing Flanges Long Welding Necl Orifice Flanges Screwed Spectabcle Blinds Spade Spacer Swivel-ring Cross-over Adaptor

Sizes 1/4” to 64”

SCH 5s to xxs

Classes 150 lb TO 25,000 lb

Joint faces Flat Face, Male/Female Face, Tongue/GrooveRaised Face, Ring Type Joint

Material Grade Stainless Steel: A182 F304/L/H, F310/H, F316/L/H, F321/H, F347/H, F410, F440, 904L

Carbon Steel: A105, C22.8

Low Temperature Steel: A350, LF2, LF3, LF6

Alloy Steel: A182 F1, F5, F9, F11, F12, F22, F91

High Yield: A694, F42, F52, F60, F65, F70

Duplex and Super Duplex: A182 F51, F44, UNS S32760

Nickel Alloys: 200, 400, 600, 625, 800, 825

Alloys: ALLOY 20, ALLOY C, ALLOY C276, ALLOY B2

Unusual Grades: Bronze, Brass, Copper, Cupro Nickel, Titanium

Standards Dimensional: ASME ANSI B16.9, ASME ANSI B16.28, MSS SP 43 & 75, BS 16.9, BS 1640, BS 1965,

Material: High quality Fittings all made and controlled to the relevantstandard such as: ASME, ASTM, BS AND DIN/ WERKSTOFFE, ISO AND PED.

Please contact thea Technical support team for addition information: Support@international-pipeline.com

International Pipeline

at a lD hn ica

I/ASME

Ty pe s

ANS

Te c

Socket Weld / 150-2500

Weld Neck

Sllip On

Ring Type Joint

Slip On

Screwed/Threaded

Lap Joint

International Pipeline

I/ASME Fa ce 1 6. 5

ANS

Type A Flat Face

Type B Raised Face

Type C Tongue Face

Type D Groove Face

Type E Spigot

Type F Recess

Type G ‘O’ Ring recess

Type H ‘O’ Ring Groove

International Pipeline

Threaded Class 150

Socket Welding 1/2’’-3’’

Slip-On Welding

Dimentions - ANSI / ASME 16.5 Size DN mm

Outside Thickdiameter ness of of Nominal Flange Flange PipeSize Min. O inch C

1/2

88.9

9.7

Bore Hub Length Through Hub Thickdiameter ness of diameter beginning Slip_On/ threaded Lap of of Welding Neck/ Slip_On/ lapped Welding Socket Lapped Joint Hub Chamfer Neck Welding Min. B Socket Welding socket Min. X welding welding Y Y Min. B1 C neck A B Y 11.2

30.2

21.3

14.2

15.7

46.0

22.4

22.9

diameter height of of raised raised face face R f 35.1

1.6

3/4

98.6

11.2

12.7

38.1

26.7

14.2

15.7

50.8

27.7

28.2

42.9

1.6

108.0

12.7

14.2

49.3

33.5

15.7

17.5

53.8

34.5

35.1

50.8

1.6

1-1/4

117.3

14.2

15.7

58.7

42.2

19.1

20.6

55.6

43.2

43.7

63.5

1.6

1-1/2

127.0

15.7

17.5

65.0

48.3

20.6

22.4

18.00

49.5

50.5

73.2

1.6

152.4

17.5

19.1

77.7

60.5

23.9

25.4

20.00

62.0

62.5

91.9

1.6

2-1/2

177.8

20.6

22.4

90.4

73.2

26.9

28.4

22.00

74.7

75.4

104.6

1.6

190.5

22.4

23.9

108.0

88.9

28.4

30.2

24.00

90.7

91.4

127.0

1.6

3-1/2

215.9

22.4

23.9

122.2

101.6

30.2

31.8

26.00

103.4

104.1

139.7

1.6

100

228.6

22.4

23.9

134.9

114.3

31.8

33.3

28.00

116.1

116.8

125

254.0

22.4

23.9

163.6

141.2

35.1

36.6

30.00

143.8

144.5

157.2

1.6

185.7

1.6

150

279.4

23.9

25.4

192.0

168.4

38.1

39.6

32.00

170.7

171.5

215.9

1.6

200

342.9

26.9

28.4

246.1

219.2

42.9

44.5

34.00

221.5

222.3

269.7

1.6

250

406.4

28.4

30.2

304.8

273.1

47.8

49.3

36.00

276.4

277.4

323.9

1.6

To Be Specified By the Purchaser

300

482.6

30.2

31.8

365.3

323.9

53.8

55.6

38.00

327.2

328.2

381.0

1.6

350

533.4

33.3

35.1

400.1

355.6

55.6

79.2

40.00

359.2

360.2

412.8

1.6

400

596.9

35.1

36.6

457.2

406.4

62.0

87.4

42.00

410.5

411.2

469.9

1.6

450

635.0

38.1

39.6

505.0

457.2

66.5

96.8

44.00

461.8

462.3

533.4

1.6

500 600

698.5

41.1

42.9

558.8

508.0

71.4

103.1

46.00

513.1

514.4

584.2

1.6

812.8

46.0

47.8

663.4

609.6

81.0

111.3

48.00

616.0

692.2

1.6

International Pipeline

Blind

Welding Neck

Lapped

Dimentions - ANSI / ASME 16.5 (contineous) corner radius of bore of Nominal lapped PipeSize Flange inch Pipe

Size DN mm

Bolt Information Depth of of Diameter Number Diameter length stud Socket Diameter of of bolts of Bolt of D 1.6mm Bolt Bolt circle Bolts raised inch Holes face

Approximate Piece Weight in Kilograms length of machine bolts 1.6mm raised face

Blind

weld Neck

Slip-On Lap Joint socket weld threaded

1/2

3.0

9.7

60.5

15.9

1/2

57.2

50.8

0.47

0.51

0.47

0.51

0.47

3/4

3.0

11.2

69.9

15.9

1/2

63.5

50.8

0.63

0.73

0.58

0.64

0.59

0.58

3.0

12.7

79.2

15.9

1/2

63.5

57.2

0.94

1.07

0.86

0.93

0.87

0.86

1-1/4

4.8

14.2

88.9

15.9

1/2

69.9

57.2

1.23

1.40

1.08

1.16

1.11

1.08

1-1/2

6.4

15.7

98.6

15.9

1/2

69.9

63.5

1.62

1.81

1.41

1.51

1.45

1.41

7.9

17.5

120.7

19.1

5/8

82.6

69.9

2.64

2.59

2.26

2.38

2.33

2.26

2-1/2

7.9

19.1

139.7

19.1

5/8

88.9

76.2

4.06

4.28

3.43

3.60

3.55

3.43

9.7

20.6

152.4

19.1

5/8

88.9

76.2

4.90

5.18

3.87

4.04

4.02

3.87

3-1/2

9.7

177.8

19.1

5/8

88.9

76.2

5.90

5.45

4.99

100

11.2

190.5

19.1

5/8

88.9

76.2

7.41

7.32

5.75

5.96

5.75

125

11.2

215.9

22.2

3/4

95.3

82.6

8.76

8.91

6.22

6.44

6.22

150

12.7

241.3

22.2

3/4

101.6

82.6

11.31

11.26

7.38

7.59

7.38

200

12.7

298.5

22.2

3/4

108.0

88.9

19.92

17.68

12.36

12.66

12.36

250

12.7

362.0

25.4

7/8

114.3

101.6

29.39

24.79

17.10

16.78

17.10

300

12.7

431.8

25.4

7/8

120.7

101.6

43.70

38.98

27.68

28.30

27.68

350

12.7

476.3

28.6

133.4

114.3

59.42

51.71

35.20

41.50

35.20

400

12.7

539.8

28.6

133.4

114.3

77.11

64.41

42.18

52.98

42.18

450

12.7

577.9

31.8

1-1/8

146.1

127.0

94.80

74.84

49.71

59.00

49.71

12.7

635.0

31.8

1-1/8

158.8

139.7

123.38

89.36

65.50

72.12

65.50

12.7

749.3

34.9

1-1/4

171.5

152.4

188.24

119.66

90.50

99.02

90.50

500 600

Notes: Flanges Raised Face Diameter and Height are based on a standard Raised Face, other flange facing types will change to ‘‘R’’ and ‘‘f’’ dimensions. For Threaded Flanges in this class a counter bore is not required. All dimensions are converted from the ASME B16.5 inch system to millimetres using 1’’ = 25.4 mm and rounded to one decimal point, except where noted. All weights are approximate only.

International Pipeline

Threaded Class 300-2500

Socket Welding 1/2’’-3’’

Slip-On Welding

Dimentions - ANSI / ASME 16.5 / Class 300 hub diameter outside thickness thickness lap diameter beginnominal diameter of flange of ning of hub joint pipe size of flange Min. of X Min. inch C O chamfer C welding neck A

Size DN mm 15

1/2

95.3

12.7

14.2

38.1

21.3

Length Through Hub threaded Slip_On/ lapped socket Y welding Y 20.6

22.4

Bore

Welding Slip_On/ Welding Socket Lapped Neck/ Socket Neck Welding Min. Welding Y Min. B B1 B 50.8

22.4

22.9

diameter of raised face R

height of raised face f

corner radius of bore of lapped flange pipe

35.1

1.6

3.0

3/4

117.3

14.2

15.7

47.8

26.7

23.9

25.4

55.6

27.7

28.2

42.9

1.6

3.0

124.0

15.7

17.5

53.8

33.5

25.4

26.9

60.5

34.5

35.1

50.8

1.6

3.0

1-1/4

133.4

17.5

19.1

63.5

42.2

25.4

26.9

63.5

43.2

43.7

63.5

1.6

4.8

1-1/2

155.4

19.1

20.6

69.9

48.3

28.7

30.2

66.8

49.5

50.5

73.2

1.6

6.4

165.1

20.6

22.4

84.1

60.5

31.8

33.3

68.3

62.0

62.5

91.9

1.6

7.9

2-1/2

190.5

23.9

25.4

100.1

73.2

36.6

38.1

74.7

75.4

104.6

1.6

7.9

209.6

26.9

28.4

117.3

88.9

41.4

42.9

77.7

90.7

91.4

127.0

1.6

9.7

3-1/2

228.6

28.4

30.2

133.4

101.6

42.9

44.5

79.5

103.4

104.1

139.7

1.6

9.7

100

254.0

30.2

31.8

146.1

114.3

46.2

47.8

84.3

116.1

116.8

157.2

1.6

11.2

125

279.4

33.3

35.1

177.8

141.2

49.3

50.8

97.0

143.8

144.5

185.7

1.6

11.2

150

317.5

35.1

36.6

206.2

168.4

50.8

52.3

97.0

170.7

171.5

200

381.0

39.6

41.1

260.4

219.2

60.5

62.0

109.7

221.5

222.3

To be specified by the purchaser`

215.9

1.6

12.7

269.7

1.6

12.7

250

444.5

46.0

47.8

320.5

273.1

65.0

95.3

115.8

276.4

277.4

323.9

1.6

12.7

300

520.7

49.3

50.8

374.7

323.9

71.6

101.6

128.5

327.2

328.2

381.0

1.6

12.7

350

584.2

52.3

53.8

425.5

355.6

74.7

111.3

141.2

359.2

360.2

412.8

1.6

12.7

400

647.7

55.6

57.2

482.6

406.4

81.0

120.7

144.5

410.5

411.2

469.9

1.6

12.7

450

711.2

58.7

60.5

533.4

457.2

87.4

130.0

157.2

461.8

462.3

533.4

1.6

12.7

774.7

62.0

63.5

587.2

508.0

93.7

139.7

160.5

513.1

514.4

584.2

1.6

12.7

914.4

68.3

69.9

701.5

609.6

104.9

152.4

166.6

616.0

692.2

1.6

12.7

500 600

International Pipeline

Blind

Welding Neck

Lapped

Dimentions - ANSI / ASME 16.5 / Class 300 (contineous) cornerBolt Information bore of diameter of nominal Depth length of length threaded Diameter Diameter Number Diameter stud pipe size Socket bolts machine bolts flange D 1.6mm of Bolt of Bolt of Bolt inch of 1.6mm Min. raised Holes circle inch Bolts raised face Q Face

Approximate Piece Weight in Kilograms

Size DN mm

Blind

weld Neck

Slip-On Lap Joint socket weld threaded

1/2

23.6

9.7

66.5

15.9

1/2

63.5

57.2

0.62

0.78

0.62

0.61

0.62

3/4

29.0

11.2

82.6

19.1

5/8

76.2

63.5

1-16

1.34

1.15

1.19

1.15

35.8

12.7

88.9

19.1

5/8

76.2

63.5

1-42

1.64

1.39

1.38

1.44

1.39

1-1/4

44.5

14.2

98.6

19.1

5/8

82.6

69.9

1-79

2.06

1.67

1.66

1.73

1.67

1-1/2

50.3

15.7

114.3

22.2

3/4

88.9

76.2

2.68

3.06

2.53

2.52

2.62

2.53

63.5

17.5

127.0

19.1

5/8

88.9

76.2

3.09

3.40

2.80

2.79

2.94

2.80

2-1/2

76.2

19.1

149.4

22.2

3/4

101.6

82.6

4.75

5.31

4.25

4.22

4.49

4.25

92.2

20.6

168.1

22.2

3/4

108.0

88.9

6.79

7.32

5.81

5.78

6.20

5.81

3-1/2

104.9

184.2

22.2

3/4

108.0

95.3

9.53

8.17

7.72

100

117.6

200.2

22.2

3/4

114.3

95.3

12.00

11.30

10.13

10.07

10.13

125

144.5

235.0

22.2

3/4

120.7

108.0

15.96

15.12

12.58

12.52

12.58

120.7

108.0

21.20

19.68

16.04

15.95

16.04

30.48

24.50

24.37

24.50

34.16

39.92

34.16 51.26 72.12

150

171.5

269.7

22.2

3/4

200

222.3

330.2

25.4

7/8

139.7

120.7

34.60

250

276.4

387.4

28.6

158.8

139.7

55.34

43.74

300

328.7

450.9

31.8

1-1/8

171.5

146.1

78.90

64.41

51.26

58.70

350

360.4

514.4

31.8

1-1/8

177.8

158.8

107.05

88.30

72.12

83.46

90.40

400

411.2

571.5

34.9

1-1/4

190.5

165.1

139.25

112.94

90.40

106.14

450

462.0

628.7

34.9

1-1/4

196.9

171.5

176.90

138.34

109.00

133.95

109.00

512.8

685.8

34.9

1-1/4

203.2

184.2

223.17

167.37

136.00

157.65

136.00

614.4

812.8

41.3

1-1/2

228.6

203.2

342.00

235.41

204.00

240.40

204.00

500 600

Notes: Flanges Raised Face Diameter and Height are based on a standard Raised Face, other flange facing types will change to ‘‘R’’ and ‘‘f’’ dimensions. For Threaded Flanges in this class a counter bore is required. NPS Sizes 50 and smaller will have a 6.4 counter bore and NPS sizes 65 and larger will have a 9.5 counter bore. All dimensions are converted from the ASME B16.5 inch system to millimetres using 1’’ = 25.4 mm and rounded to one decimal point, except where noted. All weights are approximate only.

International Pipeline

Threaded Class 300-2500

Socket Welding 1/2’’-3’’

Slip-On Welding

Dimentions - ANSI / ASME 16.5 / Class 600 Size DN mm

hub Length Through Hub diameter outside thickness diameter beginning nominal diameter Slip_On/ threaded of flange of hub of pipe size of flange Slip_On/ lapped Welding Socket Min. X chamfer socket inch Welding Neck C O Y welding welding Min. Y neck A B Y

Bore Lapped Min. B

Welding Neck/ Socket Welding B1

diameter of raised face R

height of raised face f

corner radius of bore of lapped flange pipe

1/2

95.3

14.2

38.1

21.3

22.4

52.3

22.4

22.9

35.1

6.4

3.0

3/4

117.3

15.7

47.8

26.7

25.4

57.2

27.7

28.2

42.9

6.4

3.0

124.0

17.5

53.8

33.5

26.9

62.0

34.5

35.1

50.8

6.4

3.0

1-1/4

133.4

20.6

63.5

42.2

28.4

66.5

43.2

43.7

63.5

6.4

4.8

1-1/2

155.4

22.4

69.9

48.3

31.8

69.9

49.5

50.5

73.2

6.4

165.1

25.4

84.1

60.5

36.6

73.2

62.0

62.5

91.9

6.4

7.9

2-1/2

190.5

28.4

100.1

73.2

41.1

79.2

74.7

75.4

104.6

6.4

7.9

209.6

31.8

117.3

88.9

46.0

82.6

90.7

91.4

127.0

6.4

9.7

3-1/2

228.6

35.1

133.4

101.6

49.3

85.9

103.4

104.1

139.7

6.4

9.7

157.2

6.4

11.2

185.7

6.4

11.2

To be specified by the purchaser

100

273.1

38.1

152.4

114.3

53.8

101.6

116.1

116.8

125

330.2

44.5

189.0

141.2

60.5

114.3

143.8

144.5

150

355.6

47.8

222.3

168.4

66.5

117.3

170.7

171.5

215.9

6.4

12.7

133.4

221.5

222.3

269.7

6.4

12.7

152.4

276.4

277.4

323.9

6.4

12.7

200

419.1

55.6

273.1

219.2

76.2

250

508.0

63.5

342.9

273.1

85.9

111.3

300

558.8

66.5

400.1

323.9

91.9

117.3

155.4

327.2

328.2

381.0

6.4

12.7

350

603.3

69.9

431.8

355.6

93.7

127.0

165.1

359.2

360.2

412.8

6.4

12.7

400

685.8

76.2

495.3

406.4

106.4

139.7

177.8

410.5

411.2

469.9

6.4

12.7

450

743.0

82.6

546.1

457.2

117.3

152.4

184.2

461.8

462.3

533.4

6.4

12.7

812.8

88.9

609.6

508.0

127.0

165.1

190.5

513.1

514.4

584.2

6.4

12.7

939.8

101.6

717.6

609.6

139.7

184.2

203.2

616.0

692.2

6.4

12.7

500 600

International Pipeline

Blind

Welding Neck

Lapped

Dimentions - ANSI / ASME 16.5 / Class 600 (contineous) cornerBolt Information bore length of nominal Depth of diameter pipe size Socket threaded Diameter Diameter Number Diameter stud bolts flange D of Bolt of Bolt of of Bolt 6.4 mm inch Min. Holes circle raised Bolts (inch) Q face

Approximate Piece Weight in Kilograms

Size DN mm

Blind

weld neck Slip-On Lap Joint

socket weld

threaded

0.91

1/2

23.6

9.7

66.5

15.9

1/2

76.2

3/4

29.0

11.2

82.6

19.1

5/8

88.9

1.40

1.59

1.40

1.36

1.40

35.8

12.7

88.9

19.1

5/8

88.9

1.81

1.90

1.70

1.59

1.81

1.70

1-1/4

44.5

14.2

98.6

19.1

5/8

95.3

2.40

2.49

2.27

2.04

2.60

2.27

1-1/2

50.3

15.7

114.3

22.2

3/4

108.0

3.40

3.63

3.10

2.96

3.18

3.10

63.5

17.5

127.0

19.1

5/8

108.0

4.40

4.54

3.63

3.90

3.63

2-1/2

76.2

19.1

149.4

22.2

3/4

120.7

6.80

6.35

5.44

4.99

5.90

5.44

0.91

0.90

0.91

0.80

92.2

20.6

168.1

22.2

3/4

127.0

8.90

8.10

7.26

6.35

7.40

7.26

3-1/2

104.9

184.2

25.4

7/8

139.7

13.17

11.80

9.53

9.08

9.53

100

117.6

215.9

25.4

7/8

146.1

18.60

16.78

14.97

14.06

14.97

125

144.5

266.7

28.6

165.1

13.84

30.87

28.50

27.50

28.50

36.32

35.38

36.32 44.00 76.20

150

171.5

292.1

28.6

171.5

38.00

36.77

200

222.3

349.3

31.8

1-1/8

190..5

62.20

50.80

44.00

50.80

250

276.4

431.8

34.9

1-1/4

215.9

102.00

86.26

76.20

74.00

300

328.7

489.0

34.9

1-1/4

222.3

132.00

102.51

97.52

108.56

97.52

350

360.4

527.1

38.1

1-3/8

235.0

158.00

121.56

102.00

111.00

102.00

400

411.2

603.3

41.3

1-1/2

254.0

224.73

177.06

149.82

165.71

149.82

450

462.0

654.1

44.5

1-5/8

273.1

285.00

215.65

180.10

194.00

180.10

512.8

723.9

44.5

1-5/8

285.8

365.00

267.86

231.54

258.78

231.54

614.4

8382

50.8

1-7/8

330.2

533.45

372.00

330.00

362.00

330.00

500 600

Notes: Flanges Raised Face Diameter and Height are based on a standard Raised Face, other flange facing types will change to ‘‘R’’ and ‘‘f’’ dimensions. For Threaded Flanges in this class a counter bore is required. NPS Sizes 50 and smaller will have a 6.4 counter bore and NPS sizes 65 and larger will have a 9.5 counter bore. All dimensions are converted from the ASME B16.5 inch system to millimetres using 1’’ = 25.4 mm and rounded to one decimal point, except where noted. All weights are approximate only.

International Pipeline

Threaded Class 300-2500

Socket Welding 1/2’’-3’’

Slip-On Welding

Dimentions - ANSI / ASME 16.5 / Class 900 hub Length Through Hub diameter outside thickness beginning threaded Slip_On/ diameter of flange diameter of hub of Slip_On/ lapped Welding Socket nominal of flange Min. X chamfer socket Welding Neck pipe size O C Y welding Min. welding Y inch neck A B Y

Size DN mm 15

1/2

120.7

22.4

38.1

21.3

31.8

60.5

22.4

Bore Lapped Min. B

Welding Neck/ Socket Welding B1

22.9

diameter of raised face R

height of raised face f

corner radius of bore of lapped flange pipe

35.1

6.4

3.0

3/4

130.0

25.4

44.5

26.7

35.1

69.9

27.7

28.2

42.9

6.4

3.0

149.4

28.4

52.3

33.5

41.1

73.2

34.5

35.1

50.8

6.4

3.0

1-1/4

158.8

28.4

63.5

42.2

41.1

73.2

43.2

43.7

63.5

6.4

4.8

1-1/2

177.8

31.8

69.9

48.3

44.5

82.6

49.5

50.5

73.2

6.4

215.9

38.1

104.6

60.5

57.2

101.6

62.0

62.5

91.9

6.4

7.9

2-1/2

244.3

41.1

124.0

73.2

63.5

104.6

74.7

75.4

104.6

6.4

7.9

241.3

38.1

127.0

88.9

53.8

101.6

90.7

91.4

127.0

6.4

9.7

100

292.1

44.5

158.8

114.3

69.9

114.3

116.1

116.8

157.2

6.4

11.2

125

349.3

50.8

190.5

141.2

79.2

127.0

143.8

144.5

185.7

6.4

11.2

150

381.0

55.6

235.0

168.4

85.9

139.7

170.7

171.5

215.9

6.4

12.7

200

469.9

63.5

298.5

219.2

101.6

114.3

162.1

221.5

222.3

269.7

6.4

12.7

250

546.1

69.9

368.3

273.1

108.0

127.0

184.2

276.4

277.4

323.9

6.4

12.7

300

609.6

79.2

419.1

323.9

117.3

142.7

200.2

327.2

328.2

381.0

6.4

12.7

6.4

12.7

To be specified by the purchaser

350

641.4

85.9

450.9

355.6

130.0

155.4

212.9

359.2

360.2

412.8

400

704.9

88.9

508.0

406.4

133.4

165.1

215.9

410.5

411.2

469.9

6.4

12.7

450

787.4

101.6

565.2

457.2

152.4

190.5

228.6

461.8

462.3

533.4

6.4

12.7

857.3

108.0

622.5

508.0

158.8

109.6

247.7

513.1

514.4

584.2

6.4

12.7

1041.4

139.7

749.3

609.6

203.2

166.7

292.1

616.0

692.2

6.4

12.7

500 600

International Pipeline

Blind

Welding Neck

Lapped

Dimentions - ANSI / ASME 16.5 / Class 900 (contineous) cornerBolt Information bore Depth of length of nominal diameter Socket Diameter Diameter Number Diameter stud bolts pipe size threaded D flange of Bolt of Bolt of of Bolt 6.4 mm inch Min. Holes circle Bolts raised (inch) Q face

Approximate Piece Weight in Kilograms

Size DN mm 15

1/2

23.6

9.7

3/4

29.0

35.8

1-1/4

44.5

1-1/2

50.3

Blind

weld neck Slip-On Lap Joint

82.6

22.2

3/4

108.0

1.90

2.10

11.2

88.9

22.2

3/4

114.3

2.72

12.7

101.6

25.4

7/8

127.0

4.08

14.2

111.3

25.4

7/8

127.0

15.7

124.0

28.6

139.7

socket weld

threaded

1.80

1.81

0.91

2.72

2.27

2.81

1.40

3.86

3.40

3.61

1.70

4.30

4.54

4.10

4.09

4.99

2.27

5.90

5.45

5.40

6.76

3.10

63.5

17.5

165.1

25.4

7/8

146.1

11.30

10.89

10.50

9.53

10.89

3.63

2-1/2

76.2

19.1

190.5

28.6

158.8

16.00

16.34

15.80

13.15

16.34

5.44

92.2

190.5

25.4

7/8

146.1

13.17

15.00

11.80

11.34

7.26

100

117.6

235.0

31.8

1-1/8

171.5

24.50

23.13

23.20

22.60

14.97

125

144.5

279.4

34.9

1-1/4

190.5

39.46

38.50

37.65

36.74

28.50

150

171.5

317.5

31.8

1-1/8

190.5

51.50

49.89

48.30

47.50

36.32

200

222.3

393.7

38.1

1-3/8

222.3

89.00

79.45

75.00

86.00

44.00

250

276.4

469.9

38.1

1-3/8

235.0

131.54

118.04

111.13

125.64

76.20

300

328.7

533.4

38.1

1-3/8

254.0

187.00

157.00

146.00

167.00

97.52

350

360.4

558.8

41.3

1-1/2

273.1

224.07

181.60

172.36

180.07

102.00

400

411.2

616.0

44.5

1-5/8

285.8

272.40

224.73

192.95

211.11

149.82

450

462.0

685.8

50.8

1-7/8

323.9

385.90

308.72

272.40

295.10

180.10

512.8

749.3

54.0

349.3

488.00

376.62

331.42

367.74

231.54

614.4

901.7

66.7

2-1/2

438.2

905.00

685.00

632.00

700.00

330.00

500 600

Notes: Flanges Raised Face Diameter and Height are based on a standard Raised Face, other flange facing types will change to ‘‘R’’ and ‘‘f’’ dimensions. For Threaded Flanges in this class a counter bore is required. NPS Sizes 50 and smaller will have a 6.4 counter bore and NPS sizes 65 and larger will have a 9.5 counter bore. All dimensions are converted from the ASME B16.5 inch system to millimetres using 1’’ = 25.4 mm and rounded to one decimal point, except where noted. All weights are approximate only.

International Pipeline

Threaded Class 300-2500

Socket Welding 1/2’’-3’’

Slip-On Welding

Dimentions - ANSI / ASME 16.5 / Class 1500 Size DN mm

1/2

120.7

22.4

38.1

21.3

31.8

60.5

Bore Lapped Min. B

Welding Neck/ Socket Welding B1

diameter of raised face R

height of raised face f

corner radius of bore of lapped flange pipe

22.4

22.9

35.1

6.4

3.0

3/4

130.0

25.4

44.5

26.7

35.1

69.9

27.7

28.2

42.9

6.4

3.0

149.4

28.4

52.3

33.5

41.1

73.2

34.5

35.1

50.8

6.4

3.0

1-1/4

158.8

28.4

63.5

42.2

41.1

73.2

43.2

43.7

63.5

6.4

4.8

1-1/2

177.8

31.8

69.9

48.3

44.5

82.6

49.5

50.5

73.2

6.4

215.9

38.1

104.6

60.5

57.2

101.6

62.0

62.5

91.9

6.4

7.9

2-1/2

244.3

41.1

124.0

73.2

63.5

104.6

74.7

75.4

104.6

6.4

7.9

266.7

47.8

133.4

88.9

0.0

73.2

117.3

0.0

91.4

127.0

6.4

9.7

100

311.2

53.8

162.1

114.3

0.0

90.4

124.0

0.0

116.8

157.2

6.4

11.2

125

347.7

73.2

196.9

141.2

0.0

104.6

155.4

0.0

144.5

185.7

6.4

11.2

150

393.7

82.6

228.6

168.4

0.0

119.1

171.5

0.0

171.5

215.9

6.4

12.7

To be specified by the purchaser

200

482.6

91.9

292.1

219.2

0.0

142.7

212.9

0.0

222.3

269.7

6.4

12.7

250

584.2

108.0

368.3

273.1

0.0

177.8

254.0

0.0

277.4

323.9

6.4

12.7

300

673.1

124.0

450.9

323.9

0.0

218.9

282.4

0.0

328.2

381.0

6.4

12.7

350

749.3

133.4

495.3

355.6

0.0

241.3

298.5

0.0

360.2

412.8

6.4

12.7

400

825.5

146.1

552.5

406.4

0.0

260.4

311.2

0.0

411.2

469.9

6.4

12.7

450

914.4

162.1

596.9

457.2

0.0

276.4

327.2

0.0

462.3

533.4

6.4

12.7

500

984.3

177.8

641.4

508.0

0.0

292.1

355.6

0.0

514.4

584.2

6.4

12.7

600

1168.4

203.2

762.0

609.6

0.0

330.2

406.4

0.0

616.0

692.2

6.4

12.7

International Pipeline

Blind

Welding Neck

Lapped

Dimentions - ANSI / ASME 16.5 / Class 1500 (contineous) cornerBolt Information bore length of nominal diameter Depth of pipe size threaded Socket Diameter Diameter Number Diameter stud bolts flange D of Bolt of Bolt of of Bolt 6.4 mm inch Min. Holes circle raised Bolts (inch) Q face

Approximate Piece Weight in Kilograms

Size DN mm

Blind

weld neck Slip-On Lap Joint

socket weld

threaded

82.6

22.2

3/4

108.0

1.90

2.10

1.80

1.81

1.80

11.2

88.9

22.2

3/4

114.3

2.72

2.27

2.81

2.27

12.7

101.6

25.4

7/8

127.0

4.08

3.86

3.40

3.61

3.40

14.2

111.3

25.4

7/8

127.0

4.30

4.54

4.10

4.09

4.99

4.10

15.7

124.0

28.6

139.7

5.90

5.45

5.40

6.76

5.45

63.5

17.5

165.1

25.4

7/8

146.1

11.30

10.89

10.50

9.53

10.89

10.50

76.2

19.1

190.5

28.6

158.8

16.00

16.34

15.80

13.15

16.34

15.80

1/2

23.6

9.7

3/4

29.0

35.8

1-1/4

44.5

1-1/2

50.5

2-1/2

203.2

31.8

1-1/8

177.8

21.79

17.24

100

241.3

34.9

1-1/4

196.9

33.11

31.30

29.00

125

292.1

41.3

1-1/2

247.7

60.00

59.02

54.00

150

317.5

38.1

1-3/8

260.4

75.00

74.91

62.00

200

393.7

44.5

1-5/8

292.1

136.98

123.83

129.73

250

482.6

50.8

1-7/8

336.6

229.97

205.93

220.19

300

571.5

54.0

374.7

316.00

306.00

286.02

406.4

421.00

416.00

404.06

444.5

559.00

567.50

522.10

350

635.0

60.3

2-1/4

400

704.9

66.7

2-1/2

450

774.7

73.0

2-3/4

495.3

761.00

736.00

669.65

500

831.9

79.4

539.8

967.00

929.00

805.85

600

990.6

92.1

3-1/2

616.0

1568.00

1504.00

1285.55

Notes: Flanges Raised Face Diameter and Height are based on a standard Raised Face, other flange facing types will change to ‘‘R’’ and ‘‘f’’ dimensions. For Threaded Flanges in this class a counter bore is required. NPS Sizes 50 and smaller will have a 6.4 counter bore and NPS sizes 65 and larger will have a 9.5 counter bore. All dimensions are converted from the ASME B16.5 inch system to millimetres using 1’’ = 25.4 mm and rounded to one decimal point, except where noted. All weights are approximate only.

International Pipeline

Threaded Class 300-2500

Socket Welding 1/2’’-3’’

Slip-On Welding

Dimentions - ANSI / ASME 16.5 / Class 2500 Size

Length Through Hub hub diameter diameter beginning of hub of chamfer Welding threaded lapped X Neck welding Y Y Y neck A

Bore

diameter of raised face R

height of raised face f

22.9

35.1

6.4

79.2

28.2

42.9

6.4

88.9

35.1

50.8

6.4

DN mm

nominal pipe size inch

outside diameter of flange O

thickness of flange Min. C

1/2

133.4

30.2

42.9

21.3

39.6

73.2

3/4

139.7

31.8

50.5

26.7

42.9

158.8

35.1

57.2

33.5

47.8

1-1/4

184.2

38.1

73.2

42.2

52.3

95.3

43.7

63.5

6.4

1-1/2

203.2

44.5

79.2

48.3

60.5

111.3

50.0

73.2

6.4

Lapped Min. B

235.0

50.8

95.3

60.5

69.9

127.0

62.5

2-1/2

266.7

57.2

114.3

73.2

79.2

142.7

75.4

Welding Neck/ Socket Welding B1

To be specified by the purchaser

91.9

6.4

104.6

6.4

304.8

66.5

133.4

88.9

91.9

168.1

91.4

127.0

6.4

100

355.6

76.2

165.1

114.3

108.0

190.5

116.8

157.2

6.4

125

419.1

91.9

203.2

141.2

130.0

228.6

144.5

185.7

6.4

150

482.6

108.0

235.0

168.4

152.4

273.1

171.5

215.9

6.4

200

552.5

127.0

304.8

219.2

177.8

317.5

222.3

269.7

6.4

250

673.1

165.1

374.7

273.1

228.6

419.1

277.4

323.9

6.4

300

762.0

184.2

441.5

323.9

254.0

463.6

328.2

381.0

6.4

International Pipeline

Blind

Welding Neck

Lapped

Dimentions - ANSI / ASME 16.5 / Class 2500 (contineous) Size

corner radius of cornerbore diameter bore of threaded lapped Diameter flange flange of Bolt Min. pipe circle Q

Diameter of Bolt Holes

Number of Bolts

88.9

22.2

Bolt Information

Approximate Piece Weight in Kilograms

Diameter of Bolt (inch)

length of stud bolts 6.4 mm raised face

Blind

weld neck

Lap Joint

threaded

3/4

120.7

3.18

3.00

3.18

DN mm

nominal pipe size inch

1/2

3.0

23.6

3/4

3.0

29.0

95.3

22.2

3/4

127.0

4.54

4.08

3.63

4.08

3.0

35.8

108.0

25.4

7/8

139.7

5.44

5.45

4.99

5.44

1-1/4

4.8

44.5

130.0

28.6

152.4

8.16

9.07

7.26

8.16

1-1/2

6.4

50.5

146.1

31.8

1-1/8

171.5

10.44

11.35

9.99

11.00

7.9

63.5

171.5

28.6

177.8

17.71

19.07

16.80

17.25

2-1/2

7.9

76.2

196.9

31.8

1-1/8

196.9

25.42

23.61

24.06

24.97

9.7

228.6

34.9

1-1/4

222.3

39.04

42.68

36.32

100

11.2

273.1

41.3

1-1/2

254.0

60.38

64.00

54.48

125

11.2

323.9

47.6

1-3/4

298.5

101.15

110.68

92.53

150

12.7

368.3

54.0

342.9

156.63

176.46

143.01

200

12.7

438.2

54.0

381.0

240.62

261.27

213.38

539.8

66.7

2-1/2

489.0

465.36

484.43

408.60

619.3

73.0

2-3/4

539.8

664.06

692.35

572.95

250

12.7

300

12.7

Notes: Flanges Raised Face Diameter and Height are based on a standard Raised Face, other flange facing types will change to ‘‘R’’ and ‘‘f’’ dimensions. For Threaded Flanges in this class a counter bore is required. NPS Sizes 50 and smaller will have a 6.4 counter bore and NPS sizes 65 and larger will have a 9.5 counter bore. All dimensions are converted from the ASME B16.5 inch system to millimetres using 1’’ = 25.4 mm and rounded to one decimal point, except where noted. All weights are approximate only.

International Pipeline

r ne te fa s We provide our clients with the highest quality bolts ranging from Hexagonal Square head Normal to heavy series etc to the following: ANSI B18.2.1, BS: 1083, 1768, 3692, DIN 931, 933, 960 and 961, nuts : Hexagonal, Selflocking, Bihexagonal 12 point, Normal & heavy series etc according to ANSI B.18.2.2. BS: 1083, 1768, 1769, 3692, DIN 934, 2510, 6915, etc, washers of flat, tab and spring/lock type obeying regulation standards of NFE, BS, DIN, ANSI etc. Socket Cap screws, Socket Countersunk Screws / Socket Setscrews in line with standards of BS4168 , BS2470 , Din 912 , ANSI / ASME B18.3 , ISO 4762 etc,

International Pipeline

n at io ifi c Sp ec

Bolts: Provide for clamping of the flange and gaskets components and many more products.

Stud bolts: Threaded at both ends or for the whole length

Nuts: Normal and heavy series, lock nuts etc.

Washers: flat washers and many more

Our fasteners are made from range of materials such as carbon & alloy steel, stainless steel, super alloys and duplex steel, nonferrous material etc to products which would meet your requirements. As with our other products, we are also able to provide our customers with nonstandard, tailored fasteners.

International Pipeline

Types Bolts Stead bolts Nuts Washers

Sizes

series Normal, Heavy

Coal Tin byellow, Glavanised, Sheradised, PTFE, Rilsan

Material Stainless Steel: 304, 304L, 316, 316L, 320S31

Carbon Steel: Alloy Steel: 4s99, l00Crb, 1.0301

Nickel Alloys: HastelloyB2, N1MO N1C90

Aliminium Alloy: HE1STF ALUM

Copper, Brass, Bronze and Cupronickel Alloy: PB104, C101, Ct114

Standards Dimensional: D1N931, ISO 4014, DIN 933, DIN 912, DIN 7984, ISO 7380, ASTM A193/A320

Material: ASTM A193 B7, B8

Please contact thea Technical support team for addition information: Support@international-pipeline.com

International Pipeline

at a lD hn ica Te c

Step Bolts Nominal Size1 or Basic Bolt Diameter

Body Diameter

Head Diameter

Head Height

Square Width

Square Depth

Q Corner Radius on Square

R Fillet Radius

Max.

Min.

Max.

Min.

Max.

Min.

Max.

Min.

Max.

Min.

Max.

No.10

0.199

0.182

0.656

0.625

0.114

0.094

0.199

0.185

0.125

0.094

0.031

1/4

0.260

0.237

0.844

0.813

0.145

0.125

0.260

0.245

0.156

0.125

0.031

5/16

0.324

0.298

1.031

1.000

0.176

0.156

0.324

0.307

0.187

0.156

0.031

3/8

0.388

0.360

1.249

1.188

0.208

0.188

0.388

0.307

0.219

0.188

0.047

0.031

7/16

0.452

0.421

1.406

1.375

0.239

0.219

0.452

0.431

0.250

0.219

0.047

0.031

1/2

0.515

0.483

1.594

1.563

0.270

0.250

0.515

0.492

0.281

0.250

0.047

0.031

Notes: Where specifying nominal size in decimals, zeroes preceding decimal and in the fourth decimal place shall be omitted.

International Pipeline

Elavator Bolts Nominal Size1 or Basic Bolt Diameter

E Body Diameter

A Head Diameter Min. Edge Sharp

Min. Edge Flat

Max.

Min.

Max. Edge Sharp

No.10

0.199

0.182

0.790

0.750

F C Flat on Head Dia. CAngle Min. Head

H Head Height

O Square Width

F Square Depth

Q Corner Radius on Square

R Fillet Radius

Ref.

Max.

Min.

Max.

Min.

Max.

Min.

Max.

0.740

0.025

0.082

0.062

0.210

0.185

0.125

0.094

0.031

1/4

0.260

0.237

1.008

0.969

0.938

0.035

0.098

0.078

0.280

0.245

0.219

0.188

0.031

5/16

0.324

0.298

1.227

1.188

1.157

0.035

0.114

0.094

0.342

0.307

0.250

0.219

0.031

3/8

0.388

0.360

1.352

1.312

1.272

0.040

0.145

0.125

0.405

0.368

0.250

0.219

0.047

0.031

7/16

0.452

0.421

1.477

1.438

1.397

130

0.040

0.176

0.156

0.468

0.431

0.281

0.250

0.047

0.031

1/2

0.515

0.483

1.602

1.562

1.532

120

0.040

0.176

0.156

0.530

0.492

0.281

0.250

0.047

0.031

Notes: Where specifying nominal size in decimals, zeroes preceding decimal and in the fourth decimal place shall be omitted.

No. 3 Head Plow Bolt Nominal Diameter of Bolt

3/8

A Diameter of Head Max. 0.708

Min. Sharp

Abs. Min. With Flat

0.671

0.656

F Free Thickness

S Depth of Square and Head

B Width of Aquare

Max.

Min.

Max.

Min.

0.031

0.312

0.281

0.387

0.375

7/16

0.826

0.781

0.766

0.036

0.364

0.328

0.450

0.438

1/2

0.945

0.890

0.875

0.042

0.417

0.375

0.515

0.500

5/8

1.147

1.094

1.063

0.050

0.506

0.456

0.640

0.625

Notes: Where specifying nominal size in decimals, zeroes preceding decimal and in the fourth decimal place shall be omitted.

International Pipeline

Hex Socket Head Cap Screw Nominal Size1 or Basic Screw Diameter

D Body Diameter

A Head Diameter

H Head Height

S head Side Height

J hexagon Socket Size

T Key Engage ment

F Fillet Extension Above D

LT Thread Length

Max.

Min.

Max.

Min.

Max.

Min.

Max.

Nom.

Min.

Max.

Min.

0.050

0.025

0.007

0.003

0.50

0.0600

0.0568

0.096

0.091

0.060

0.057

0.054

0.0730

0.0695

0.118

0.112

0.073

0.070

0.066

1/6

0.062

0.031

0.007

0.003

0.62

0.0860

0.0822

0.140

0.134

0.086

0.083

0.077

5/64

0.078

0.038

0.008

0.004

0.62

0.0990

0.0949

0.161

0.154

0.099

0.095

0.089

5/64

0.078

0.044

0.008

0.004

0.62

0.1120

0.1075

0.183

0.176

0.112

0.108

0.101

3/32

0.094

0.051

0.009

0.005

0.75

0.1250

0.1202

0.205

0.198

0.125

0.121

0.112

3/32

0.094

0.057

0.010

0.006

0.75

0.1380

0.1329

0.226

0.218

0.138

0.134

0.124

7/64

0.109

0.064

0.010

0.006

0.75

0.1640

0.1585

0.270

0.262

0.164

0.159

0.148

9/64

0.141

0.077

0.012

0.007

0.88

0.1900

0.1840

0.312

0.303

0.190

0.185

0.171

5/32

0.156

0.090

0.014

0.009

0.88

1/4

0.2500

0.2435

0.375

0.365

0.250

0.244

0.225

3/16

0.188

0.120

0.014

0.009

1.00

5/16

0.3125

0.3053

0.469

0.457

0.312

0.306

0.281

1/4

0.250

0.151

0.017

0.012

1.12

3/8

0.3750

0.3678

0.562

0.550

0.375

0.368

0.337

5/16

0.312

0.182

0.020

0.015

1.25

7/16

0.4375

0.4294

0.656

0.642

0.438

0.430

0.394

3/8

0.375

0.213

0.023

0.018

1.38

1/2

0.5000

0.4919

0.750

0.735

0.500

0.492

0.450

3/8

0.375

0.245

0.026

0.020

1.50

5/8

0.6250

0.6163

0.938

0.921

0.625

0.616

0.562

1/2

0.500

0.307

0.032

0.024

1.75

3/4

0.7500

0.7406

1.125

1.107

0.750

0.740

0.675

5/8

0.625

0.370

0.039

0.030

2.00

7/8

0.8750

0.8647

1.312

1.293

0.875

0.864

0.787

3/4

0.750

0.432

0.044

0.034

2.25

1.0000

0.9886

1.500

1.479

1.000

0.988

0.900

3/4

0.750

0.495

0.050

0.040

2.50

1/4

1.2500

1.2336

1.875

1.852

1.250

1.236

1.125

7/8

0.875

0.620

0.060

0.050

3.12

1 1/2

1.5000

1.4818

2.250

2.224

1.500

1.485

1.350

1.000

0.745

0.070

0.060

3.75

International Pipeline

Hex Socket Button Head Cap Screw Nominal Size1 or Basic Screw Diameter

A Head Diameter

H Head Height

S head Side Height

J hexagon Socket Size

T Key Engage ment

F Fillet Extension Above D

LT Thread Length

Max.

Min.

Max.

Min.

Max.

Nom.

Min.

Max.

Min.

0.0860

0.164

0.154

0.046

0.038

0.010

0.050

0.028

0.010

0.005

1/2

0.0990

0.188

0.176

0.052

0.044

0.010

1/16

0.062

0.035

0.010

0.005

1/2

0.1120

0.213

0.201

0.059

0.051

0.015

1/16

0.062

0.035

0.010

0.005

1/2

0.1250

0.238

0.226

0.066

0.058

0.015

5/64

0.078

0.044

0.010

0.005

1/2

0.1380

0.262

0.250

0.073

0.063

0.015

5/64

0.078

0.044

0.010

0.005

5/8

Min.

0.1640

0.312

0.298

0.087

0.077

0.015

3/32

0.094

0.052

0.015

0.010

3/4

0.1900

0.361

0.347

0.101

0.091

0.020

1/8

0.125

0.070

0.015

0.010

0.75

1/4

0.2500

0.437

0.419

0.132

0.122

0.031

5/32

0.156

0.087

0.020

0.015

0.88

5/16

0.3125

0.547

0.527

0.166

0.152

0.031

3/16

0.188

0.105

0.020

0.015

0.88

3/8

0.3750

0.656

0.636

0.199

0.185

0.031

7/32

0.219

0.122

0.020

0.015

1/4

1/2

0.5000

0.875

0.851

0.265

0.245

0.046

5/16

0.312

0.175

0.030

0.020

1.12

5/8

0.6250

1.000

0.970

0.331

0.311

0.062

3/8

0.375

0.210

0.030

0.020

1.25

International Pipeline

Va lv e Here at International Pipeline we present our clients the distinct advantage by providing the widest valve requirement range through our multiple ranges of manufacturers. Being renowned worldwide supplier of valves for the oil and gas sector, chemical, petrochemical and mining industry, we provide our clients with a variety of valves produced from exotic material grades and capable of operating in various conditions. We appreciate essentiality of the technical requirements and accountability of project deadlines, to this end; we are committed to providing the finest range of valves available in todayâ&#x20AC;&#x2122;s market to our clients in the minimum delivery time. As part of our commitment to excellence in customer service, International Pipeline provides the expertise and technology of the worldâ&#x20AC;&#x2122;s premier valve brands into one single, industry leaing entity. Through our committed sales team and engineers we are committed to providing valuable support to our clients from the initial specification through to on site delivery. Our valves conform to the standard pressure and temperature ratings specified by ASME, API, ASTM,ANSI/AWWA and many more.

International Pipeline

n at io ifi c Sp ec

We can provide the following types of valves to our clients Ball Gate Globe Butterfly Plug Diverter Check Needle Actuated Controled Relief Solenoid Rotary Gate Double Block & Bleed Valve Diaphragm

International Pipeline

Types Gate Globe Check Ball Butterfly Wafer check Diverter Needle Belief Solenoid Choke Rotary gate Diaphragm Manifold Plug Wedge gate

Sizes 1/2 ‘‘

Classes 150 lb - 9000 lb

connection Threaded, Flanged, Screwed, Butt weld

Material Stainless Steel: Carbon Steel: Duplex Stainless steel: Inconel & Morel: Aluminium: Bronze:

Standards Dimensional: API 600, API 603, ANSI B16.34, BS 1873, BS 1868, DN 40, DN 2 400, BS 5352, A182

Material: ASME 1.4901, ASME 1.0460, ASME 1.5415, BS1400, ASTM A194, ASTM A105, ANSI 416, UNI 18734

Please contact thea Technical support team for addition information: Support@international-pipeline.com

International Pipeline

er in ra St

A pipeline strainer is a device which provides a means of mechanically removing solids from a flowing fluid. This is accomplished by utilizing a perforated metal, mesh or wedge wire straining element. The most common range of strainer particle retention is 1â&#x20AC;? to 40 micron (0.0016â&#x20AC;?). International Pipeline is committed to providing you with all types of strainers made from the highest caliber of material. We provide all types of strainers ranging from Y-strainers to basket, duplex/twin, temporary, automatic self cleaning strainer, plate/expanded cross section strainer, high differential strainer, micronic strainer, high capacity (volume) basket strainer, magnetic strainer, wash down/manual fixed or rotary sprat etc. International pipeline can supply you with a full range of manual and automatic strainers. All products are manufactured and tested to ASME and CSA standards. Most product lines are available in sizes up to 60â&#x20AC;? in diameter and pressures up to 10, 000 PSIG. We are committed to providing our clients with the best rang of strainers available in the market, to this end, we maintain our excellent relationships with established manufacturers which use high quality materials such as cast and ductile iron, bronze, carbon steel, stainless steel and duplex in pressure classes 125 lb through 2500 lb.

International Pipeline

n at io ifi c Sp ec

We can provide the following types of strainers to our clients Y Strainer Basket Double/Twin Temporary Wash-Down, Manual, Fixed or Rotary spray Automatic Self Cleaning High Differential Micronic High Capacity Basket Magnetic Offset Reducing Jacketed

International Pipeline

Types Y strainer Duplex/Twin Temporary (geometry) Wash down Manual Automatic self-cleaning High capacity Reducing Simple Tee Cone FRP Basket

Sizes 1/2 ‘‘ to 40’’

coating Kel-F, Epoxy, Teflon, Zac, Vinyl, Nickel, Zinc, Asphalt

end connection Threaded, Flanged, Weld ends, Special ends

Material Stainless Steel: 3162, 304, 304L, 316

Carbon Steel: WCB, B7, 2H

Alloy Steel: WC9, Gr 7

Mild steel: M20

Standards Dimensional: ASME 16.11, BS3799, ASME 16.25, ASME B1.20.1 – B16.34

Material: ASTM A277, DIN 1691EE20, ASTM A216, ASTM A193, ASTM A197, ZN 10 213, 1.7379

Please contact thea Technical support team for addition information: Support@international-pipeline.com

International Pipeline

ap tr m ea St

Steam traps are a type of automatic valve that filters out condensate (i.e. condensed steam) and non-condensable gases such as air without letting steam escape. In industry, steam is used regularly for heating or as a driving force for mechanical power. Steam traps are used in such applications to ensure that steam is not wasted. Here at International Pipelines, we offer our clients the best ranges of steam traps available on the market. Our excellent manufacturing partners practice and procedure, including 100% testing for all our traps before dispatch, have been the key to our success. Another aspect of our success is a continuous improvement process built around our Engineering Services division. It is focused on creating new and improved products as well as assisting our clients in finding ways to reduce their total cost of production. The steam traps provided with abide by international standards such as DIN, EN, BS, ASME etc.

International Pipeline

n at io ifi c Sp ec

The range of Steam Traps we provide our listed below: Steam Trap Performance Monitoring Balanced Pressure Steam Traps Thermodynamic Steam Traps Inverted Bucket Steam Traps Ball Float Steam Traps Fixed Temperature Discharge Steam Traps Bimetallic Steam Traps

International Pipeline

Types Balanced pressure Bimetallic Fixed temperature discharge Inverted Bucket Thermo dynamic Sealed Swivel Membrane

Sizes 3/8 ‘‘ and above

Maximum allowable pressure & temperature: 3350 psig, 50 – 1000* F

connection NPT, SW, BSP, Flanged

Material Stainless Steel: F22, 304, 304L, 316, 316L, 660, 651, 420, 420F, 303, 416

Cast iron: A126

Standards Dimensional: ASME 16.11, BS3799, ASME 16.25, ASME B1.20.1 – B16.34

Material: ASTM A277, D1N 1691EE20, ASTM A216, ASTM A193, ASTM A197, ZN 10 213, 1.7379

Please contact thea Technical support team for addition information: Support@international-pipeline.com

International Pipeline

nt joi n sio pa n ex When misalignment, vibration, or thermal expansion produces problem forces in a piping system, International Pipeline can provide the expansion joint solution. Whether the application requires a standard or special joint, as small as 1â&#x20AC;? or as large as 240â&#x20AC;? diameter, we can supply quality metal bellows products at competitive prices and deliveries. The units are packless, all metal fabrication in single, universal, hinged, gimbaled, pressure balanced, rectangular and externally pressurized guided types. Design factors such as bellows wall thickness, number of convolutions, corrugation height, and number of plies can all be varied to meet specifications for original or replacement joints. We also offer bellows pump connectors, braided pump connectors, expansion compensators, flexible metal hose and alignment guides.

International Pipeline

n at io ifi c Sp ec

We provide variety of Expansion joint such as Metallic Expansion Joint 1) Single 2) Universal 3) Elbow Pressured Balance 4) Inline Pressure Balanced 5) Hinged 6) Gimbal 7) Externally Pressurized 8) Toroidal 9) Thick Wall 10) Slip 11) Rectangular 12) Refractory Lined 13) Tied Universal 14) Dual 15) Victailic Groove 16) Full Flow Fabric Expansion Joints Rubber Expansion Joints 1) Wrapping fabric reinforced ruber sheets 2) Molded rubber We can also provide our clients expansion joints with various deflection types such as: Axial Compression Axial Extension Lateral Angular Combined Torsional Cyclic

International Pipeline

Types Metalic Expansion Joints Rubber Bellows Fabric Bellows PTFE Bellows

Sizes

coating 150 to 2500

End Fitting Flange, Pipe Ends, Threaded Unions

Rubber Type: Nitrile Buna AP/ Keltan Hypalon Neoprene, Baypren Teflon Bellows Materials: 304 S/S 304 L S/S** 316 S/S 321 S/S Monel 400 Inconel 600 Inconel 625 Incoloy 800/800H Incoloy 825 Hastello C-276

Standards ASME Section Vlll, ANSI B313, ANSI B31.1, API 620, AISI AISC MIL-Q-9858A, MILL-STD-276, MIL-STD-271, MIL-STD-410 AMCS DNMEJ (FSA), EJMA

Please contact thea Technical support team for addition information: Support@international-pipeline.com

International Pipeline

et sk ga Gaskets are used to create a static seal between two stationary members of a mechanical assembly and to maintain that seal under operating conditions which may vary dependent upon changes in pressures and temperatures. If it were possible to have perfectly mated flanges and if it were possible to maintain an intimate contact of those perfectly mated flanges throughout the extremes of operating conditions, a gasket would not be required. This is virtually an impossibility because of: 1. The size of the vessel and/or the flanges 2. The difficulty in maintaining such extremely smooth flange finishes during handling and assembly 3. Corrosion and erosion of the flange surfaces during operations The gaskets provided to you are within the international standards of DIN, API 6A, BS 3381, BS 4865, ASME B16.20/21 etc.

International Pipeline

n at io ifi c Sp ec

We can provide with variety of gaskets such as: Metallic and Semi metallic gaskets 1. Corrugated metal Gasket system 2. Metal Jacketed Gaskets 3. Camprofile (Grooved) Gaskets 4. Ring Joints 5. Spiral Wound Gaskets Non-Metallic Gaskets 1. Eyelet 2. Fiber Reinforced Gaskets 3. Graphite Gaskets 4. PTFE Gaskets 5. Rubber Gaskets

International Pipeline

Types Metallic, Non Metallic, Semi metall i.e. Corrugated and metal, Metal Jacketed, Camprofile (grooved), Ring joint, Spiral, Eyelet, Fibre reinforced, Graphite, PTEF, Rubber

Sizes 3/8 â&#x20AC;&#x2DC;â&#x20AC;&#x2DC; and above

categories Metallic, Semi metallic, Non metallic

Material Aramid fibre Carbone fibre Gloss fibre Silicone Natural rubber Chlor butadiene rubber

Standards Dimensional: ANSI B16.20, ASME B16.21

Material:

Please contact thea Technical support team for addition information: Support@international-pipeline.com

International Pipeline

r ba d an at e pl International Pipelines is one of the most well known suppliers of panel flat sheet, plate, blanks, bars and pipes. In order to supply todayâ&#x20AC;&#x2122;s sophisticated sheet metal working equipment, we offer a comprehensive range from 0.6mm and above in all popular mild steel grades, processed to stringent panel flat tolerances. International Pipeline holds the widest ranges of sizes and specifications in stainless and carbon steel plate products, Our product range includes stainless steel, Duplex and Super Duplex, HIC Steel plate, Boiler plate, pressure vessel steel plate, Abrasion resistant and structural steel plate, chrome molybdenum and ultra-high yield plate etc. Extensive and successful relationship with major stock holders and manufacturers of plates plays an essential role in the success of the company. We are committed in using our long standing partnerships with the stock holders and manufacturers to assist our customers in reaching their targets, satisfaction and requirements.

International Pipeline

n at io ifi c Sp ec

We provide the following types to our clients Welded pipe Threaded Seamless We can provide the following coating protections Layer Polyethylene Coating (3 LPE) Layer Polypropylene Coating (3 LPP) Rubberized Asphalt (RA) FBE and multilayer coatings Internal and external applications Plural component applications

International Pipeline

100

Types Bar Plate Tube Sheet

Sizes 2 and above

Production Condition: Hot Rolled, Forged, Quenched & Tempered, Annealed,

Material Grade Stainless Steel: A312 304/L/H, 310/H, 316/L/H, 321/H, 347/H,410, 440, 904L.

Carbon Steel: A106Gr.B/C, API 5L Gr.B.

Low Temperature: ASTM A333Gr.6/3.

Alloy Steel: A335 P1, P5, P9, P11, P12, P22, P91.

High Yield: API 5L X42, 52, 60, 65, 70.

Duplex and Super Duplex: UNS S31254, UNS S31803, UNS S32760. 31254 (6MO)

Nickel Alloys: 200, 400, 600, 625, 800, 825.

Alloys: ALLOY 20, ALLOY C, ALLOY C276, ALLOY B2.

Unusual Grades: Bronze, Brass, Copper, Cupro Nickel, Titanium, Monel 400, Inconel 600/625

Standards

Made and Controlled to the relevant standards such as: ASTM, ASME, FEDERAL, AMS, CASTLE, NACE MR01-75

Please contact thea Technical support team for addition information: Support@international-pipeline.com

International Pipeline

101

t en m ru st in

International Pipeline has the privilege of having a network of instrument suppliers and manufacturers specializing in meeting the unique measurement and instrumentation needs of the Oil & Gas Industry. Our portfolio of products offers solutions for the upstream, midstream and downstream segments of the industry. From instruments and equipment for production to petroleum product testing equipment for terminals and consumers, International Pipeline offers many technologies, systems and solutions that are unique to our member companies. We strive to provide the highest level of support and service our customers expect from us. We are capable of delivering top of the range products from Foxboro Invensys, Emerson Rosemount and Fisher, Ametek, Wika, Pulsar, Invensys Eurotherm, M.System and many more.

International Pipeline

102

International Pipeline

103

n at io ifi c Sp ec

We can provide the following types of instruments to our clients Pressure Differential Gauge Manifold Temperature Sensors Thermo wells Transmitter Level Transmitters Flow Indicator

International Pipeline

104

Types Gauge Indicator Pneumatic Digital Recorder Transmitter Control Monitor Tester

Sizes 2 ‘‘ and above

Accuracy Range: 0.10% span, ASME B.40.1 GA, (+_ 1 ?? span), ASME B40.1 GB (+_ 0.5)

Pressure and temperature ranges: Vacuum to 100000 psi and above, 150*c and above

Brands: Fibre / Rosemount Foxboro Masoneilan Honeywell Ashcroft Delta Moore FMC Magnetrol Meci A.O.Smoth Siemens Klinger Phonix

Test Standards ASTM D5191, AD6378, ASTM D6377, ASTM D323, DNV OS D202, EEMU189, ANSI 1IEEE std 1008

Please contact thea Technical support team for addition information: Support@international-pipeline.com

International Pipeline

105