The Ultrawash Sink. Powerful Water Flow.
FRAME & STRUCTURE • System custom configurable as per plans & specifications. (L or U-shaped designs available upon request.) • Type 304 #4 stainless steel construction.• 14-gauge stainless steel tanks and drain boards. • Pre-configured lengths from 96” to 120” in 6”increments, 34” front to back depth. • 9-1/2” high x 2-1/2” wide backsplash. SINK • Sink front trim panel. • 1-1/2” Ø drains, pre-rinse sprayer and faucets included. • 2 or 3 HP wash pump motor with stainless steel impeller, pump housing and wash manifold. • Stainless steel wash pump housing fully self-draining with no use of drain line or valve. • Stainless steel wash pump intake to run full length of the rear of the wash tank below wash jets. • Dual liquid high and low water level sensors.
Ultra-Standards • Inherent motor overload protection, automatic reset. • 2kw - 7kw wash tank heater maintains wash tank temperature at 115 ̊ +/- 0.5 F ̊ • Auto fill LEGS • 1-5/8” Ø stainless steel legs and cross rails. • Stainless Steel Bullet feet. WARRANTY • 3-year parts and labor warranty INSTALLATION REQUIREMENTS • Single point 208-240V/60Hz/3Phase electrical connection (pre-wired by factory). • 1/2“ Ø Hot and cold water connections. • 3/4“ Ø Hot water connection (auto fill). • 1-1/2” Ø Drain connections. CONTROLS Time washed cycle, sanitizer tank cycle monitoring, wash tank heat. Controls Include: • Main disconnect breaker on main panel
• 4-hour wash timer with reset • Controls - Red (OFF)/Green (ON)/ Selector Switch • Auto wash water temperature control • Sanitizer and wash tank liquid monitoring sensor
• 24V power supply to all sensors and operators. OPTIONS • 480V/60Hz/3 Phase electrical connection • Wash sink heater with high temperature and low water protection. • Utensil Basket • Sheet pan racking system • Table mounted over and under shelf • Pot and pan overhead shelf w/ hooks • Flanged feet DIRECTION FROM SOILED TO CLEAN • Left to Right • Right to Left
Continuous Motion Wash System by TragenFlex
2022 ULTRAWASH | 1-855-363-0335 | sales@tragenflex.com ANSI/NSF 2 Sanitation 04/2022
ULTRAWASH_Brochure.indd 1
2022-04-01 1:10 PM
The Ultrawash System.
Engineered for customization, cost savings and efficiency. Ultrawash delivers operation flexibility, ROI from labor costs and an intense wash system that is suited for sheets, pots, pans and utensils. Numerous water jets provide a forceful, continuous wave of hot and soapy water from back to front, that removes baked-on foods and provides clean dishware for today’s commercial kitchens. Its quiet, gentle action stems from its superior efficiency and the unit will be a valuable addition to your dish room.
1. CONTROLS
2. CONSTRUCTION
Pro Logic Controls (PLC) puts the controls in your hands – wash run times, can be adjusted in the field to suit your specific kitchens needs. Sanitize tank cycle monitoring sensor with visual alarm. UL listed panel with built in main disconnect.
Superior quality heavy duty construction. Ultrawash table-top and sinks are fabricated with heavy duty 14 GA finished stainless steel. All sinks are fully welded with ¾” radius corners. Understructure is 1-5/8” stainless steel tubular support legs & cross braces, fully welded.
LABOR SAVINGS Over 50% labor cost savings making a fast return on investment when compared to a traditional 3 compartment sink.
OPTIONAL UPPER SHELF SHOWN
Ultra Configurations. ULTRAWASH SYSTEM – INLINE A centralized scrap area and sink allows for easy transfer of ware into a conveyor rack dishmachine with a large clean table area Featuring: Powered pre-scrap collector overhead pre-rinse faucet 32” powered wash sink 24” wash & sanitize sink w/removable rack guides conveyor rack dish machine clean dish roller table for maximum clean rack capacity
ULTRAWASH SYSTEM – CORNER UNIT Great for tight spaces, the Ultrawash sink system and clean table easily connect to corner door type dish machines Featuring: 36” powered wash sink 24” wash & sanitize sink w/removable rack guides corner door type dish machine large clean table with undershelf
3
4
2
1
OPTIONAL UNDER SHELF SHOWN
5
A large pre-scrap staging and work area
3. WASH JETS
4. PUMP MOTOR
5. HEATER
The wash jets are strategically located in the back of sink to provide maximum air and water flow to remove the heavy soiled and grease off the pots and pans.
Powered by an energy efficient pump motor, the water discharged from stainless steel impeller creates a powerful whirling effect to meet your most demanding application.
Custom designed heating element to maintain the water at correct operating temperature, giving you consistent and optimum results.
ULTRAWASH_Brochure.indd 2
ULTRAWASH SYSTEM – W/DISPOSER
Featuring: Disposer & pre-rinse faucet 40” powered wash sink 18” wash & sanitize sink spacious clean ware storage area w/heavy duty undershelf
2022-04-01 1:11 PM
The Ultrawash System.
Engineered for customization, cost savings and efficiency. Ultrawash delivers operation flexibility, ROI from labor costs and an intense wash system that is suited for sheets, pots, pans and utensils. Numerous water jets provide a forceful, continuous wave of hot and soapy water from back to front, that removes baked-on foods and provides clean dishware for today’s commercial kitchens. Its quiet, gentle action stems from its superior efficiency and the unit will be a valuable addition to your dish room.
1. CONTROLS
2. CONSTRUCTION
Pro Logic Controls (PLC) puts the controls in your hands – wash run times, can be adjusted in the field to suit your specific kitchens needs. Sanitize tank cycle monitoring sensor with visual alarm. UL listed panel with built in main disconnect.
Superior quality heavy duty construction. Ultrawash table-top and sinks are fabricated with heavy duty 14 GA finished stainless steel. All sinks are fully welded with ¾” radius corners. Understructure is 1-5/8” stainless steel tubular support legs & cross braces, fully welded.
LABOR SAVINGS Over 50% labor cost savings making a fast return on investment when compared to a traditional 3 compartment sink.
OPTIONAL UPPER SHELF SHOWN
Ultra Configurations. ULTRAWASH SYSTEM – INLINE A centralized scrap area and sink allows for easy transfer of ware into a conveyor rack dishmachine with a large clean table area Featuring: Powered pre-scrap collector overhead pre-rinse faucet 32” powered wash sink 24” wash & sanitize sink w/removable rack guides conveyor rack dish machine clean dish roller table for maximum clean rack capacity
ULTRAWASH SYSTEM – CORNER UNIT Great for tight spaces, the Ultrawash sink system and clean table easily connect to corner door type dish machines Featuring: 36” powered wash sink 24” wash & sanitize sink w/removable rack guides corner door type dish machine large clean table with undershelf
3
4
2
1
OPTIONAL UNDER SHELF SHOWN
5
A large pre-scrap staging and work area
3. WASH JETS
4. PUMP MOTOR
5. HEATER
The wash jets are strategically located in the back of sink to provide maximum air and water flow to remove the heavy soiled and grease off the pots and pans.
Powered by an energy efficient pump motor, the water discharged from stainless steel impeller creates a powerful whirling effect to meet your most demanding application.
Custom designed heating element to maintain the water at correct operating temperature, giving you consistent and optimum results.
ULTRAWASH_Brochure.indd 2
ULTRAWASH SYSTEM – W/DISPOSER
Featuring: Disposer & pre-rinse faucet 40” powered wash sink 18” wash & sanitize sink spacious clean ware storage area w/heavy duty undershelf
2022-04-01 1:11 PM
The Ultrawash Sink. Powerful Water Flow.
FRAME & STRUCTURE • System custom configurable as per plans & specifications. (L or U-shaped designs available upon request.) • Type 304 #4 stainless steel construction.• 14-gauge stainless steel tanks and drain boards. • Pre-configured lengths from 96” to 120” in 6”increments, 34” front to back depth. • 9-1/2” high x 2-1/2” wide backsplash. SINK • Sink front trim panel. • 1-1/2” Ø drains, pre-rinse sprayer and faucets included. • 2 or 3 HP wash pump motor with stainless steel impeller, pump housing and wash manifold. • Stainless steel wash pump housing fully self-draining with no use of drain line or valve. • Stainless steel wash pump intake to run full length of the rear of the wash tank below wash jets. • Dual liquid high and low water level sensors.
Ultra-Standards • Inherent motor overload protection, automatic reset. • 2kw - 7kw wash tank heater maintains wash tank temperature at 115 ̊ +/- 0.5 F ̊ • Auto fill LEGS • 1-5/8” Ø stainless steel legs and cross rails. • Stainless Steel Bullet feet. WARRANTY • 3-year parts and labor warranty INSTALLATION REQUIREMENTS • Single point 208-240V/60Hz/3Phase electrical connection (pre-wired by factory). • 1/2“ Ø Hot and cold water connections. • 3/4“ Ø Hot water connection (auto fill). • 1-1/2” Ø Drain connections. CONTROLS Time washed cycle, sanitizer tank cycle monitoring, wash tank heat. Controls Include: • Main disconnect breaker on main panel
• 4-hour wash timer with reset • Controls - Red (OFF)/Green (ON)/ Selector Switch • Auto wash water temperature control • Sanitizer and wash tank liquid monitoring sensor
• 24V power supply to all sensors and operators. OPTIONS • 480V/60Hz/3 Phase electrical connection • Wash sink heater with high temperature and low water protection. • Utensil Basket • Sheet pan racking system • Table mounted over and under shelf • Pot and pan overhead shelf w/ hooks • Flanged feet DIRECTION FROM SOILED TO CLEAN • Left to Right • Right to Left
Continuous Motion Wash System by TragenFlex
2022 ULTRAWASH | 1-855-363-0335 | sales@tragenflex.com ANSI/NSF 2 Sanitation 04/2022
ULTRAWASH_Brochure.indd 1
2022-04-01 1:10 PM