W I NW ATR EM ERR S
AUSTRALIA’S LARGEST MANUFACTURER AND RETAILER OF WOOD HEATERS.
From compact wood heaters to inbuilts, Norseman has a heater for every need and every family. Incredibly well built and remarkably efficient, the Norseman range has been designed to fit comfortably into either contemporary or traditional dĂŠcor. Like all our wood heaters the Norseman range is backed up by our 10 year firebox guarantee.
LUMBERJACK
NEVADA
Capacity up to 15 sqs. Ironbark hi temp finish
Capacity up to 18 sqs. Ironbark hi temp finish
Clearances
Clearances
Rear Wall Side Wall Corners Hearth
Maxiheat flue kit (no shield)
475
750
525
Rear Wall Side Wall Corners Hearth
300
Maxiheat flue kit (no shield)
425
400
225
300
175
400
175
300
300
750
525
300
Maxiheat flue kit with single shield (MXRSISS)
Maxiheat decromesh flue kit 300
750
525
300
Maxiheat decromesh flue kit
175
400
175
300
300
Maxiheat flue kit with double shield (MXRSISS & MXRSOB)
100
400
175
300
Maxiheat flue kit with single shield (MXRSISS)
Maxiheat flue kit with double shield (MXRSISS & MXRSOB) 225
750
525
*Optional fan available
Height: 750 Width: 560 Depth: 500
Height: 750 Width: 620 Depth: 500
LEGEND
FORESTER
Capacity up to 25 sqs. Ironbark hi temp finish
Capacity up to 18 sqs. Ironbark hi temp finish
Clearances
Clearances
Maxiheat flue kit (no shield)
400
400
250
300
Maxiheat flue kit with single shield (MXRSISS)
200
400
125
300
Rear Wall Side Wall Corners Hearth
Maxiheat flue kit (no shield)
2
475
800
525
300
Rear Wall Side Wall Corners Hearth
Maxiheat flue kit with single shield (MXRSISS)
250
800
525
300
Maxiheat decromesh flue kit
200
400
125
300
Maxiheat decromesh flue kit
250
800
525
300
Maxiheat flue kit with double shield (MXRSISS & MXRSOB)
Maxiheat flue kit with double shield (MXRSISS & MXRSOB)
90
400
125
300
150
800
525
300
*Optional fan available
Height: 730 Width: 560 Depth: 600
Height: 790 Width: 680 Depth: 600
Sleek curves and smooth flowing lines give the Norseman Silhouette an ultra contemporary look. With a long burn time, integral three speed fan and massive heat output, the Silhouette performs as well as it looks. The range is available in two finishes, Ironbark and Pewter and like all our wood heaters, comes with a 10 year firebox guarantee.
S I L H O U E T T E
SILHOUETTE GL
Getting the most from your Norseman Silhouette.
Capacity up to 28 sqs. Hi temp finish Clearances
Rear Side Wall Wall Corners Hearth
Maxiheat decromesh flue kit with outer shield (MXRSOB)
The Norseman Silhouette range features our unique full flow fan air circulation system – a revolutionary feature that provides you with a number of benefits when heating your home:
50
350
75
300
Height: 730 Width: 790 Depth: 580
• Air is circulated over the entire surface area of the heavy duty firebox, unlike some manufacturers who only direct fan air across some parts of the firebox.
Colours:
• Additional vents allow for greater heat circulation, unlike some heaters that force air in only one direction.
Pewter
Ironbark
• Maximum heat output is distributed gently and evenly into your home.
SILHOUETTE GLX
SILHOUETTE GLI INBUILT
Capacity up to 35 sqs. Hi temp finish
Capacity up to 24 sqs. Hi temp finish
Clearances
Rear Side Wall Wall Corners Hearth
Maxiheat decromesh flue kit with outer shield (MXRSOB)
75
350
50
300
Height: 770 Width: 830 Depth: 670
Colours:
A MAS
SQ
S
E
35
35
VE
HEA T
S
SI
Ironbark
600 687 456 700 980 105
REAR OF HEATER TO FLUE CENTRE = 151mm
Colours: Pewter
Height Width Depth
Maxiheat chimney kit Cabinet Facia
UAR
Pewter
Ironbark
*See inbuilt installation disclaimer on back page.
3
R
mm
BL
OX
DU
8
A
B
8
M STEE M
L
The award winning team at Saxon has achieved excellence in wood heater design with their 2010 range of heaters. The range combines massive heat output, high efficiency, a heavy duty 8mm steel firebox, self cleaning glass doors and genuine good looks. All Saxon heaters have also been tested and approved for both safety and efficiency when fitted with a Maxiheat flue system.
E FIR
E
WALNUT Capacity up to 17 sqs. Ironbark hi temp finish Rear Side Wall Wall Corners Hearth 50
300
*Includes 3 speed fan
Height: 775 Width: 690 Depth: 560
4
Rear Side Wall Wall Corners Hearth 250 500 150 500 150 500 50 500 100
500
50
500
Rear Side Wall Wall Corners Hearth 250 450 150 500
Maxiheat decromesh flue kit with outer shield (MXRSOB)
150
450
150 500
Maxiheat decromesh flue kit with inner shield (MXRSISS) located between the active flue and decromesh
100
450
150 500
Height: 830 Width: 775 Depth: 600
BLACKWOOD INBUILT
BLACKWOOD
Capacity up to 23 sqs. Ironbark hi temp finish
Capacity up to 25 sqs. Ironbark hi temp finish
Height Width Depth Maxiheat chimney kit Facia 700 900 Cabinet 600 635 434
Clearances
*Includes 3 speed fan
*See inbuilt installation disclaimer on back page.
UAR
Clearances Maxiheat decromesh flue kit
*Includes 3 speed fan
REAR OF HEATER TO FLUE CENTRE = 145mm
35
SQ
Capacity up to 35 sqs. Ironbark hi temp finish
Capacity up to 25 sqs. Ironbark hi temp finish Clearances Maxiheat decromesh flue kit Maxiheat decromesh flue kit with outer shield (MXRSOB) Maxiheat decromesh flue kit with inner shield (MXRSISS) located between the active flue and decromesh
A MAS
VE
ROSEWOOD
35
MAHOGANY
S
SI
HEA T
Height: 650 Width: 606 Depth: 500
350
S
Maxiheat decromesh flue kit with inner shield (MXRSISS) located between the active flue and decromesh 75
E
Clearances
Maxiheat decromesh flue kit
Rear Wall SideWall Corners Hearth 100
Height: 740 Width: 700 Depth: 530
250
50
300
*Includes 3 speed fan
*Includes 3 speed fan
The Austwood range of wood heaters have been designed to provide you with maximum heat and minimum fuss. They’re stylish, efficient, low maintenance and incorporate a large glass door to ensure you get all the pleasure that a wood heater offers. They also feature a 3 speed fan, a hot air wash to keep the glass viewing area clean and are expertly constructed from solid 6mm steel.
WENTWORTH
LAWSON
Capacity up to 26 sqs. Ironbark hi temp finish
Capacity up to 32 sqs. Ironbark hi temp finish
Clearances
Rear Side Wall Wall Corners Hearth
Clearances
Rear Side Wall Wall Corners Hearth
Maxiheat decromesh flue kit
175
300
Maxiheat decromesh flue kit
270
350
175
450
300
Maxiheat decromesh flue kit with outer shield (MXRSOB) 180
350
175
450
Maxiheat decromesh flue kit with outer shield (MXRSOB)
150
330 330
100 100
Height: 790 Width: 690 Depth: 590
Height: 840 Width: 790 Depth: 590
WENTWORTH INBUILT
LAWSON INBUILT
Capacity up to 22 sqs. Ironbark hi temp finish
Capacity up to 28 sqs. Ironbark hi temp finish
Maxiheat chimney kit Cabinet Facia
Height Width Depth
Maxiheat chimney kit Cabinet Facia
600 608 440 730 930
REAR OF HEATER TO FLUE CENTRE = 138mm
*See inbuilt installation disclaimer on back page.
Height Width Depth
5
650 708 440 780 1030
REAR OF HEATER TO FLUE CENTRE = 138mm
*See inbuilt installation disclaimer on back page.
MAKE SURE YOU’RE GETTING THE RIGHT WOOD HEATER FOR YOUR HOME.
What do I need to know when buying a wood heater?
Five most common forms of installation. Once you have selected your wood heater it is just as important to ensure you have selected the right location within your home and that the heater is installed correctly. A qualified professional
should carry out installation as a number of serious problems can occur. The diagrams below show the five most common forms of installation. • Consider the position of your wood heater • A fter the wood heater’s position has been decided on, the flue system is then installed
What is the size of the area you need to heat? Is it open plan or small rooms connected by hall-ways?
• T he flue system must be flashed (sealed) at the point where it exits the roof lining
What is the height of the room the wood heater will be in? Are your ceilings flat or at an angle? What type of floor coverings are in the room? What material is the roof made from? Tiled, metal, pitched, flat etc. Where will the heater be located? Internal or external wall, corner or flat against the wall or in an existing chimney. What materials are the walls made from? Do you have curtains nearby? What is the height of the gap in the roof space, are there any obstructions such as beams that may require an offset? What is the distance from the peak of the roof to the point where the flue will exit?
6
Are there power points located nearby for the fan? Is your home single or double storey?
Most common form of installation: Single Storey Installation
45 Degree Wall Penetration
Cathedral Ceiling Installation
Floor Penetration
Inbuilt Installation
Common installation considerations. While most heaters are installed without issue there are always exceptions to the rule. The diagram on the right illustrates the most common issue; getting the flue height correct to avoid issues such as down drafts. All wood heater installations must meet the Australian Installation Standards. The minimum height for the wood heater installation is 4.6 metres from the bottom of the heater to the top of the flue. However, there are circumstances that require the flue to be extended. • T he flue needs to extend from the exit point of the roofline by a minimum of 1 metre
If less than 3 metres: Flue is too low If less than 3 metres: Flue is too low
Discover our huge range of heating accessories.
Flue termination point 1Mt Min
4.6Mts Minimum
• I f the flue is within 3 metres of the roof’s peak then it needs to be extended beyond that point by a minimum of 1 metre
Window
• I f the flue is within 3 metres of the neighbour’s roof then it needs to be extended beyond the highest point by a minimum of 1 metre By ensuring that these simple measures are taken you can enjoy the use of your wood heater without the hassle of down drafts or annoying your neighbours with smoke from the flue. Installation requirements are adhered to by professional installers and therefore to avoid any issues it is best to use a qualified installer.
Neighbours Property
It won’t surprise you to know that we carry an extensive range of heating accessories. From pokers and tongs right through to wood and fire lighters. Whatever you require, just ask our staff for better advice on the right accessories.
We’ll find the right flue for you. Choosing the right flue system is as important as the choice of wood heater. To extract maximum performance from your Barbeques Galore wood heater we strongly recommend the use of Maxiheat flue systems. Maxiheat flue systems are designed, tested and approved to Australian
7 Standards. Maxiheat flue systems and components have been manufactured to high standards from quality materials for over 25 years and are the market leaders in flue technology.
Checklist.
Wood heating quote.
Store Name:
Heater Model (inc Colour)
Qty
Code
Cost
MXFKT1SS MXFKET1… MXFKDEC1
$ $ $
MXDCP… MXRSISS MXRSOB
$ $ $
MXSL1000SS MXEL1000… MXDCP…
$ $ $
1m x 1m 1m x 1.2m
TH1BLK/TH1SL TH12BLK/TH12SL
$ $
THCNRBLK/ THCNRSL
$
1200mm
Address: Flue Kit Stainless Vitreous Decromesh
Phone: Date:
Heat Shield Decromesh – Club Design Inner S/S Outer Black
Installation Date: Sales Person:
Extension Lengths Standard
Over 8’
Cathedral
2 Storey
Drop Box
Tiled
Metal
Pitched
Flat
Other
Ceiling Roof Plaster
Timber
Brick
Internal
External
Walls
Hearth Slate Slate
Corner Slate
Slab
Timber
Carpet
Tiles
Other
Carpet Guard
Cust. Built
Existing
Nil
Other
Single
Double
Dec. Mesh
Nil
Other
High walls
High trees
Windy area
Nil
Other
Floor
Hearth
Stainless 1m x 6” diam Vitreous 1m x 6” diam Decorative Casing
Firescreen $
Decorative/Child Guard
Fan - 3 speed
MXFAN933
$
Toolset/Wood Bucket
$
Delivery Charge
$
Shield Installation Charge
Nearby
Other
Standard Single Story Wall Penetration Installation Power Point
Remove Old Heater
Permit
Smoke Detectors
Total package price including GST
$
Quotes are completed on information provided in store. Additional costs may be incurred at installation upon site inspection if information is incorrect.
6 reasons to buy from the best in the business. WE’RE AUSTRALIA’S LARGEST MANUFACTURER AND RETAILER OF WOOD HEATERS
Our wood heaters are made right here ensuring better quality and better heating.
OVER 30 YEARS OF HEATING EXPERIENCE
Our fully trained staff are available in store to offer you better advice at no extra price ensuring you are getting the perfect heater for your home.
10 YEAR FIREBOX WARRANTY ON ALL HEATERS
Our guarantee of better quality to give you peace of mind.
REVOLUTIONARY CLEAN BURN SYSTEM IN EVERY HEATER
It ensures maximum heat output and reduced smoke emissions to care for the environment.
MEMBER OF THE AUSTRALIAN HOME HEATING ASSOCIATION
Our membership is your guarantee of the highest ethical standards and product quality.
SUPPORTER OF LANDCARE AUSTRALIA
Their tree planting efforts help to provide a renewable heating resource for your home.
*Inbuilt wood heaters are not zero clearance appliances, which means they must not be installed in timber stud walls or within an enclosure made of combustible materials. Inbuilt heaters can only be installed into an existing masonry fireplace or a full masonry enclosure. Installation specifications are a guide only and are subject to change. All inbuilt heaters must be installed in a full masonry cavity and to AS/NZS 2918:2001 specifications. In general - no combustible material should be closer than 600mm above the hot air outlet or 300mm from the sides of the outer side of the heater box. Refer to the appliance installation manual for all clearances and procedures prior to installation. Heating performance may reduce as a result of vaulted ceilings, drafts, large glassed areas or poor insulation. At Barbeques Galore we are continually striving to improve our range of heaters, accessories and spare parts. We reserve the right to change specifications without notice. Some products may not be available at all stores. ABN 93 001 354 454. Mar 2010. BBQ8280
1300 BARBEQUES
barbequesgalore.com.au For your nearest store call 1300 227 237