6 reasons to buy from the best in the business. WE’RE AUSTRALIA’S LARGEST RETAILER OF WOOD HEATERS
REVOLUTIONARY CLEAN BURN SYSTEM IN EVERY HEATER
We have a national network of stores that support our huge range of premium quality heaters.
It ensures maximum heat output and reduced smoke emissions to care for the environment.
OVER 30 YEARS OF HEATING EXPERIENCE
10 YEAR FIREBOX WARRANTY ON MOST HEATERS
Our fully trained staff are available in store to offer you better advice at no extra price ensuring you are getting the perfect heater for your home.
Our guarantee of better quality to give you peace of mind.
100% AUSTRALIAN OWNED Barbeques Galore proudly supports the activities of Landcare Australia through its membership of the AHHA. *Inbuilt wood heaters are not zero clearance appliances, which means they must not be installed in timber stud walls or within an enclosure made of combustible materials. Inbuilt heaters can only be installed into an existing masonry fireplace or a full masonry enclosure. Installation specifications are a guide only and are subject to change. All inbuilt heaters must be installed in a full masonry cavity and to AS/NZS 2918:2001 specifications. In general - no combustible material should be closer than 600mm above the hot air outlet or 300mm from the sides of the outer side of the heater box. Refer to the appliance installation manual for all clearances and procedures prior to installation. Heating performance may reduce as a result of vaulted ceilings, drafts, large glassed areas or poor insulation. At Barbeques Galore we are continually striving to improve our range of heaters, accessories and spare parts. We reserve the right to change specifications without notice. Some products may not be available at all stores. ABN 93 001 354 454. Jan 2014. POSBW14
For your nearest store: barbequesgalore.com.au
WIN T E R WA R M E R S
AUSTRALIA’S LARGEST RETAILER OF WOOD HEATERS.
NOTHING BEATS THE WARMTH OF A WOOD FIRE
No other form of heating can match sitting in front of a roaring wood fire. Thanks to the technological breakthroughs of
Choosing a wood heater The four major factors to consider when it comes to choosing a wood heater are: • Size of your home
the past few years, wood heaters are now as
• Building layout
efficient as they are pleasurable. Today’s clean
• Number of rooms you’d like to heat
burning heaters use less fuel and create more
• Your priorities between aesthetics and efficiency
through the top of the heater. A good clean burn convection heater can produce over 3 cubic metres of heated air per minute.
INBUILT HEATERS Inbuilts are the perfect way to convert an existing open fireplace into a far more efficient and user friendly heat source. All inbuilts feature an outer shell which ensures that heat is transferred into the room rather than absorbed into the brickwork. They all feature fans which force the hot air out rather than allowing it to travel up the flue.
Barbeques Galore offers many different options to satisfy every one of
heat than ever before.
Barbeques Galore – Australia’s one-stop wood heating shop Australia’s largest wood heating retailer, Barbeques Galore, has been manufacturing wood heaters for over 25 years!
these needs.
DO I NEED A FAN?
RADIANT HEATERS
Fans will help circulate larger volumes of warm air, breaking down the
Radiant wood heaters have all sides of the firebox exposed. They are designed for heating large open areas where heat can travel in straight
Shop around, you’ll find our staff are fully trained in all aspects of wood heating and can advise you on the size and output you require, as well as organising installation and finance should you require it. Once your heater is installed, you can be sure that Barbeques Galore will always be there with any accessories, advice and maintenance you may need. So put your feet up, pour a cup of coffee and have a look at how a
2
wood heater will make a wonderful, practical and stylish addition to your home.
with a fan will heat a room faster than a conventional heater.
lines. Ideal for rumpus room areas or large open plan homes.
OTHER POINTS TO CONSIDER
CONVECTION HEATERS
Check the construction quality of the firebox, as this is the engine of any
Convection heaters are designed with an air cavity between the firebox
WE OFFER A WOOD HEATER TO SUIT EVERY REQUIREMENT AND MOST OF OUR HEATERS ARE BACKED BY A 10 YEAR FIREBOX WARRANTY
layers of hot air that collect at ceiling level. Consequently a wood heater
and the outer skin. This means that the air in the cavity heats up, expands and rises, drawing more air in from below and forcing the hot air out
wood heater. All Norseman and Austwood heaters feature high grade 6mm steel fireboxes while our Saxon heaters are fitted with super strong 8mm steel fireboxes.
Stylish warmth for a cold night matched with low emissions and remarkably efficient designs makes the Maxiheat range of wood heaters fit comfortably into any home.
5
MANOR 10 1000 00 Capacity up to 150 squa square are m metres. Metallic black hi temp finish Clearances
Rear Wall
Side Wall
kit 420 Maxiheat decromesh flue u ki
675
400
300
420
675
400
300
350
675
400
300
Maxiheat flue kit with single shield Maxiheat flue kit with double shield
Corners Hearth
Depth: 480 Height: 645 Width: 695 De (1m x 1m) Recommended Hearth: MXTH1BLK/GRY MXT REAR OF HEATER TO FL FLUE LUE C CENTRE = 152mm
MANOR MAN NOR N OR 2000 Capacity up to 220 square metres. Metallic black hi temp finish Clearance
Rear Wall Maxiheat decromesh flue kit 150
Side Wall 400
Corners Hearth 75 450
Height: 730 Width: 670 Depth: 565 Recommended Hearth: MXTH12BLK/GRY (1.2m x 1.2m) REAR OF HEATER TO FLUE CENTRE = 196mm
3
From compact wood heaters to inbuilts, Norseman has a heater for every need and every family. Incredibly well built and remarkably efficient, the Norseman range has been designed to fit comfortably into either contemporary or traditional dĂŠcor. Like all our wood heaters the Norseman range is backed up by our 10 year firebox guarantee.
LUMBERJACK LU
NEVADA N
Capacity up to 150 square metres. Ironbark hi temp finish Cap
Capacity up to 180 square metres. Ironbark hi temp finish Capa
Clea Clearances
Clea Clearances
Rear Wall Side Wall Corners Hearth
Rear Wall Side Wall Corners Hearth
Max Maxiheat flue kit (no shield) 475
750
525
300
Max Maxiheat flue kit (no shield)
425
400
225
300
Max Maxiheat flue kit with sing single shield (MXRSISS)
300
750
525
300
Max Maxiheat flue kit with sing single shield (MXRSISS)
175
400
175
300
Max Maxiheat decromesh flue kit 300
750
525
300
Max Maxiheat decromesh flue kit
175
400
175
300
300
Max Maxiheat flue kit with double shiel shield (MXRSISS & MXRSOB) 100
400
175
300
Max Maxiheat flue kit with double shie shield (MXRSISS & MXRSOB) 225
750
525
Heig Height: 750 Width: 560 Depth: 500
*Optional fan available *Opt
Rec Recommended Hearth: MXTH1BLK/GRY (1m x 1m)
Height: 750 Width: 620 Depth: 500 Heig Recommended Hearth: MXTH12BLK/GRY (1.2m x 1.2m) Reco
REAR OF HEATER TO FLUE CENTRE = 175mm REA
REAR OF HEATER TO FLUE CENTRE = 175mm R REA
LEGEND
FORESTER Capacity up to 180 square metres. Ironbark hi temp finish
Clearances
Clearances
Maxiheat flue kit (no shield)
Maxiheat flue kit (no shield)
4
Capacity up to 250 square metres. Ironbark hi temp finish
Rear Wall Side Wall Corners Hearth 475
800
525
Rear Wall Side Wall Corners Hearth earth 300
200
400
125
300
200
400
125
300
90
400
125
300
250
800
525
300
Maxiheat decromesh flue kit
250
800
525
300
Maxiheat flue kit with double shield (MXRSISS & MXRSOB)
525
250
Maxiheat flue kit with single shield (MXRSISS) Maxiheat decromesh flue kit
800
400
300
Maxiheat flue kit with single shield (MXRSISS)
Maxiheat flue kit with double shield (MXRSISS & MXRSOB) 150
400
300
*Optional fan available
Height: 730 Width: 560 Depth: 600
Height: 790 Width: 680 Depth: 600
Recommended Hearth: MXTH1GRY/GRY (1m x 1m)
Recommended Hearth: MXTH12BLK/GRY (1.2m x 1.2m)
REAR OF HEATER TO FLUE CENTRE = 175mm
REAR OF HEATER TO FLUE CENTRE = 175mm
Sleek curves and smooth flowing lines give ve the Norseman Silhouette uette an ultra u contemporary lo look. With a long burn time, integral three speed fan and massive heat at output, the Silhouette tte perform performs as well as it looks looks. The range is available in two finishes, Ironbark and Pewter and like ke all our wood heaters, rs, comes with w a 10 year firebox firebo guarantee.
SILHOUETTE GL SI
Getting the most from your Norseman Silhouette.
Cle Clearances
The Norseman Silhouette range features our unique full flow fan air circulation system – a revolutionary feature that provides you with a number of benefits when heating your home:
Height: Hei 730 Width: 790 Depth: 580
Capacity up to 280 square metres. Hi temp finish Cap
Ma Maxiheat decromesh flue kit wit outer shield (MXRSOB) 50 with
Pewter
SILHOUETTE GLX
SILHOUETTE GLI INBUILTT
Capacity up to 350 square metres. Hi temp finish
Capacity up to 240 square metres. Hi temp finish
350
50
Maxiheat chimney kit Cabinet Fascia
3000
Height: 770 Width: 830 Depth: 670
Width
Depth ptth
600 700
687 980
456 56 6 105 05 5
VE
HEA
A MA S
SI
TS
U
AR
R
ES
SQ
Ironbark
Height
Ironbark
Colours:
REAR OF HEATER TO FLUE CENTRE = 185mm
Pewter
300
REAR OF HEATER TO FLUE CENTRE = 151mm
Recommended Hearth: MXTH12BLK/GRY (1.2m x 1.2m)
Colours:
75
Colours:
• Maximum heat output is distributed gently and evenly into your home.
Maxiheat decromesh flue kit with outer shield (MXRSOB) 75
350
REAR OF HEATER TO FLUE CENTRE = 172mm REA
• Additional vents allow for greater heat circulation, unlike some heaters that force air in only one direction.
Rear Side th Wall Wall Corners Hearth
Side Wall Corners Hearth
Rec Recommended Hearth: MXTH12BLK/GRY (1.2m x 1.2m)
• Air is circulated over the entire surface area of the heavy duty firebox, unlike some manufacturers who only direct fan air across some parts of the firebox.
Clearances
Rear Wall
E MET
Pewter
Ironbark
*See inbuilt installation disclaimer on back page.
5
The Austwood range of wood heaters have been designed to provide you with maximum heat and minimum fuss. They’re stylish, efficient, low maintenance and incorporate a large glass door to ensure you get all the pleasure that a wood heater offers. They also feature a 3 speed fan, a hot air wash to keep the glass viewing area clean and are expertly constructed from solid 6mm steel.
BLAXLAND Capacity up to 180 square metres. Ironbark hi temp finish Clearances
Rear Wall
Side Wall Corners Hearth
Maxiheat decromesh flue kit
200
300
100
300
Maxiheat decromesh flue kit with outer shield (MXRSOB)
150
300
100
300
Height: 687 Width: 630 Depth: 492 Recommended Hearth: MXTH12BLK/GRY (1.2m x 1.2m) REAR OF HEATER TO FLUE CENTRE = 193mm
WENTWORTH
BLAXLAND INBUILT
Capacity up to 260 square metres. Ironbark hi temp finish
Capacity up to 150 square metres. Ironbark hi temp finish Height
6
Maxiheat chimney kit Cabinet Fascia
574 705
Width 543 870
Clearances
Rear Wall
Side Wall Corners Hearth
Depth
Maxiheat flue kit (no shield)
300
400
100
400
386
Maxiheat decromesh flue kit with outer shield (MXRSOB)
100
400
50
400
Height: 736 Width: 690 Depth: 542 Recommended Hearth: MXTH12BLK/GRY (1.2m x 1.2m) *See inbuilt installation disclaimer on back page.
REAR OF HEATER TO FLUE CENTRE = 193mm
LAWSON INBUILT Capacity up to 280 square metres. Ironbark hi temp finish
Maxiheat chimney kit Cabinet Fascia
Height
Width
Depth
674 805
703 1031
438
WENTWORTH W N W INBUILT N
*See inbuilt installation disclaimer on back page.
Capacity up to 220 square metres. Ironbark hi temp finish Height Width Depth Maxiheat chimney kit Cabinet Fascia
624 755
603 931
438
REAR OF HEATER TO FLUE CENTRE = 138mm *See inbuilt installation disclaimer on back page.
LAWSON Capacity up to 320 square metres. Ironbark hi temp finish Clearances
Rear Wall
Side Wall
Maxiheat flue kit (no shield)
375
525
200
670
Maxiheat decromesh flue kit with outer shield (MXRSOB) 250
525
125
670
Corners Hearth
Height: 886 Width: 790 Depth: 542 Recommended Hearth: MXTH12BLK/GRY (1.2m x 1.2m) REAR OF HEATER TO FLUE CENTRE = 193mm
7
The award winning team at Saxon has achieved excellence in wood heater design with their range of heaters. The range combines massive heat output, high efficiency, a heavy duty 8mm steel firebox, self cleaning glass doors and genuine good looks. All Saxon heaters have also been tested and approved for both safety and efficiency when fitted with a Maxiheat flue system.
ROSEWOOD Capacity up to 250 square metres. Ironbark hi temp finish Clearances Clear Maxiheat decromesh flue kit Maxi Maxiheat decromesh flue kit with outer shield (MXRSOB) Maxi Maxiheat decromesh flue kit with inner shield (MXRSISS) Maxi located between the active flue and decromesh locat Height: 775 Width: 690 Depth: Heig epth: 560
Rear Side Wall Wall Corners Hearth 250 500 150 500 150 500 50 500 100
500
50
500
*Includes *Include es 3 speed fan
Recommended Hearth: MXTH12BLK/GRY Reco TH12BLK/GRY (1.2m x 1.2m) REAR OF HEATER TO FLUE CENTRE = 174mm
VE
HEA
A MA S
SI
TS
U
R
ES
SQ
AR
E MET
MAHOGANY Capacity up to 350 square metres. Ironbark hi temp finish Clearances
WALNUT Capacity up to 170 square metres. Ironbark hi temp finish Clearances
8
Rear Wall
Maxiheat decromesh flue kit with inner shield (MXRSISS) located between the active flue and decromesh 75 Height: 650 Width: 606 Depth: 500
Corners Hearth rth
Side Wall 450
Maxiheat decromesh flue kit with outer shield (MXRSOB)
150
450
150
500
Maxiheat decromesh flue kit with inner shield (MXRSISS) located between the active flue and decromesh 100
450
150
500
Height: 830 Width: 775 Depth: 600
350
50
00 300
REAR OF HEATER TO FLUE CENTRE = 180mm
Corners Hearth 150 500
*Includes 3 speed fan
Recommended Hearth: MXTH12BLK/GRY (1.2m x 1.2m)
*Includes 3 speed fan
Recommended Hearth: MXTH12BLK/GRY (1.2m x 1.2m) REAR OF HEATER TO FLUE CENTRE = 171mm
Side Wall
Maxiheat decromesh flue kit
Rear Wall 250
R
BLACKWOOD Capacity up to 250 square metres. Ironbark hi temp finish C Clearances C M Maxiheat decromesh flue kit
Rear Wall SideWall Corners Hearth 100
250
Height: 740 Width: 700 Depth: 530 H
50
300
*Includes 3 speed fan
Recommended Hearth: MXTH12BLK/GRY (1.2m x 1.2m) R
E FIR
OX
mm
BL
B
8 DU
8
A
L
M STEE M
E
Warm your home, winter after winter
R REAR OF HEATER TO FLUE CENTRE = 162mm
Saxon wood heaters have been designed in Tasmania for the unique Tasmanian conditions. Saxon wood heaters set the standard in wood heating technology and durability by providing the first 8mm steel firebox available in Australia. This thick firebox doesn’t need firebricks and comes with a 10 year warranty that will give you peace of mind that your Saxon wood heater will last winter after winter. Therefore, when buying a Saxon wood heater you will have a clean burning and efficient method of keeping your home warm throughout winter.
Saxon wood heaters have been tested in Australia, on Australian grown hardwood and to Australian standards.
BLACKWOOD INBUILT Capacity up to 230 square metres. Ironbark hi temp finish Maxiheat chimney kit Fascia Cabinet
Height
Width
Depth
700 600
900 635
434
REAR OF HEATER TO FLUE CENTRE = 145mm
9
*Includes 3 speed fan
*See inbuilt installation disclaimer on back page.
MAKE SURE YOU’RE GETTING THE RIGHT WOOD HEATER FOR YOUR HOME.
What do I need to know when buying a wood heater?
Five most common forms of installation. Once you have selected your wood heater it is just as important to ensure you have selected the right location within your home and that the heater is installed correctly. A qualified professional
should carry out installation as a number of serious problems can occur. The diagrams below show the five most common forms of installation. • Consider the position of your wood heater • After the wood heater’s position has been decided on, the flue system is then installed
What is the size of the area you need to heat? Is it open plan or small rooms connected by hall-ways?
• The flue system must be flashed (sealed) at the point where it exits the roof lining
What is the height of the room the wood heater will be in? Are your ceilings flat or at an angle? What type of floor coverings are in the room? What material is the roof made from? Tiled, metal, pitched, flat etc. Where will the heater be located? Internal or external wall, corner or flat against the wall or in an existing chimney. What materials are the walls made from? Do you have curtains nearby? What is the height of the gap in the roof space, are there any obstructions such as beams that may require an offset? What is the distance from the peak of the roof to the point where the flue will exit?
10
Are there power points located nearby for the fan? Is your home single or double storey?
Most common form of installation: Single Storey Installation
45 Degree Wall Penetration
Cathedral Ceiling Installation
FloorPenetration
InbuiltInstallation
Common installation considerations. While most heaters are installed without issue there are always exceptions to the rule. The diagram on the right illustrates the most common issue; getting the flue height correct to avoid issues such as down drafts. All wood heater installations must meet the Australian Installation Standards. Theminimumheightforthewoodheaterinstallationis4.6metres from the bottom of the heater to the top of the flue. However, there are circumstances that require the flue to be extended.
If less than 3 metres: Flue is too low If less than 3 metres: Flue is too low
Discover our huge range of heating accessories.
Flue termination point 1Mt Min
• The flue needs to extend from the exit point of the roofline by a minimum of 1 metre
4.6Mts Minimum
• If the flue is within 3 metres of the roof’s peak then it needs to be extended beyond that point by a minimum of 1 metre
Window
• If the flue is within 3 metres of the neighbour’s roof then it needstobeextendedbeyondthehighestpointbyaminimum of 1 metre By ensuring that these simple measures are taken you can enjoy the use of your wood heater without the hassle of down drafts or annoying your neighbours with smoke from the flue. Installation requirements are adhered to by professional installers and therefore to avoid any issues it is best to use a qualified installer.
Neighbours Property
It won’t surprise you to know that we carry an extensive range of heating accessories. From pokers and tongs right through to wood and fire lighters. Whatever you require, just ask our staff for better advice on the right accessories.
We’ll find the right flue for you. Choosing the right flue system is as important as the choice of wood heater. To extract maximum performance from your Barbeques Galore wood heater we strongly recommend the use of Maxiheat flue systems. Maxiheat flue systems are designed, tested and approved to
11 Australian Standards. Maxiheat flue systems and components have been manufactured to high standards from quality materials for over 25 years and are the market leaders in flue technology.
Checklist.
Wood heating quote.
Store Name:
Heater Model (inc Colour) Qty Code
Cost
Address: Flue Kit Phone: Date:
$ $ $ $
MXDCP MXRSISS MXRSOB
$ $ $
MXSL1000SS MXSL1000K MXDCP…
$ $ $
1m x 1m 1m x 1.2m 1.2m x 1.2m
MXTH1BLK/GRY TH12SL MXTH12BLK/GRY
$ $ $
1200mm
MXTHCNRBLK/GRY
$
Heat Shield
Installation Date:
Decromesh – Club Design Inner S/S Outer Black
Sales Person: Standard
Over 8’
Cathedral
2 Storey
Drop Box
Ceiling Tiled
Metal
Pitched
Flat
Other
Roof
Extension Lengths Stainless 1m x 6” diam Painted 1m x 6” diam Decorative Casing
Hearth Plaster
Timber
Brick
Internal
External
Walls
Corner Slab
Timber
Carpet
Tiles
Other
Floor
Firescreen Carpet Guard
Cust. Built
Existing
Nil
Other
Hearth
$
Decorative/Child Guard
Fan - 3 speed
MXFAN933
$
Single
Double
Dec. Mesh
Nil
Other
Toolset/Wood Bucket
$
High walls
High trees
Windy area
Nil
Other
Delivery Charge
$
Shield
Nearby
Installation Charge Power Point
Other
MXFKT1MB MXFKT1SS MXFKDEC1 MXFKCH1
Metallic Black Stainless Decromesh Chimney
Remove Old Heater
Permit
Smoke Detectors
Standard Single Story Wall Penetration Installation
Total package price including GST
$
Quotes are completed on information provided in store. Additional costs may be incurred at installation upon site inspection if information is incorrect.