BIM 3D Models For Elevators & Escalators: Nowadays, many Architects design new building projects in a 3D environment, using Building Information Modeling [BIM] technology. The space planning is not just by defining lines which are only 2-dimensional but by defining each element of the building in a 3-dimensional environment, along with inputting appropriate design data related to each element. Such design data built into the model elements are very useful all throughout the design process. Design data behind each element can be queried, verified, consolidated and used for further coordination, clash detection, conflict resolution, cost assessment and supply chain identification. VTME Elevator Consultants are able to provide completed and ready-to-insert 3D models for various elevator and escalator types. The models have the requisite design and product data for the Architects to instantly access the various technical parameters of the elevators/escalators in a project. VTME also includes further detail design data such as Motor power, Heat rejection, Structural loads, associated special design bases within the parameter list. Such detailed design data provides instant information not only for the Architects but to the complete design team providing essential design information to structural engineers, MEP engineers and interior designers. VTME completes its BIM models for the Architects to directly insert an elevators/escalator model into their Architectural model. VTME's BIM models are developed to LOD 300 level which includes visual representation of landing doors and entrances, elevator cars, signal fixtures, guide rails and machinery space general arrangement. The model is developed to fit an exact elevator shaft and machinery space defined by the Architects following the project's dimensions and elevation heights.
Typical elevator BIM Model parameters include: Safety Code
Wheelchair Rotation
Yes
Use
Pass
Over run - mm
4850
Capacity – Kgs
1275
Pit Depth - mm
2000
Machinery Space
MRL
Speed – m/s
EN-81
2.0
Car Shape
Wide
M/C room Height - mm
Car Width – mm Car Depth – mm
2000
No
1400
Firefighter’s Use Seismic Design
Car Height – mm
2500
Motor Capacity – kW
22
Door Type
CO
Heat Rejection - kW
4
Door Width – mm
1100
Machinery Load - kN
295
Door Height – mm
2100
Pit Load - kN
139
Door Str. Opening (W) - mm
1300
Usable Space Below Pit
No
2200
ID Weight - kg
600
Door Str. Opening (H) - mm Front Openings
G,1,2,3
Rear Openings
-
ID Thickness - mm Budget Price –AED
Contact us for your BIM Elevator/Escalator project requirements. VTME VERTICAL TRANSPORTATION SYSTEMS CONSULTANTS Post Box: 18806 Dubai, UAE Tel : +971 4 2636647 Fax: +971 4 2636674 E-mail : info@vtmeconsulting.com Website: www.vtmeconsulting.com
2A
18 200K