MINDRILL
Construction and
Mining tools
www.mindrill.com
RELIABILITY UNPARALLELED POWER UNMATCHED
Sinker Drills
Sinker Drills Mindrill carries a wide range of Sinker Drills. The streamlined design incorporates smooth contours, a side exhaust and “a flat back” that makes Mindrill rock drills easy to handle in quarries, mines and general excavation work. The high power-to-weight ratio and compactness of the rock drills result high penetration rate which means the job gets done quickly for maximum productivity.
Features • Forged steel housings withstand rugged use. • Low weight • High torque
MH505L
• Very reliable and resistant to wear • Large sliding face • Long stroke machine • High impact energy • Good penetration in hard and soft rock • Low spare parts consumption • Blower for deep hole cleaning • Robust kick-latch type retainers
MH505L
This air flushed, medium heavy duty rock drill is a top performer in its class and MH505L is highly effective in general excavation work, quarry drilling, bench drilling, secondary drilling and other jobs requiring a sinker of its class. It is capable of drilling 27-40 mm diameter holes with H22 integral/extension steels up to depth of 6 meter.
www.mindrill.com
Sinker Drills
MH502A
MH505FR
MH505FR
MH502A
It is another version of MH505L for dry drilling with footrest to provide extra comfort and easier operation to drillers.
MH502A Sinker Drill’s robust design makes them easy to handle in quarry, mine and general excavating work. The design also provides a main valve and cylinder porting concept that helps to maintain constant drilling speed throughout a long service life. Working parts are constantly protected with an effective lubrication system.
MH625
MH501L
MH625
MH501L
MINDRILL MH625 sinker drill delivers high frequency penetration. Standard operating controls are located on the drill back head. It has light weight balance handling and comes with “T” handle with spring which reduces the vibration transfer from rock drill to operator.
The light weight MH501L is perfect for smaller jobs. All models are equipped with T-handles for a solid and comfortable grip. Its built in air flushing gives faster blasting cycles. This drill is particularly helpful where the air supply is limited and light weight is critical factor.
Weight
Model
Length
Air Consumption
Piston Dia
Stroke Length
Shank Size
Kg
lb
mm
inch
l/s
cfm
mm
inch
mm
inch
18
40
510
20 1/16"
39
83
55
2 5/32"
60
2 11/32"
22 X 108 7/8 X 4 ¼"
6
87
2100
MH502A
26
57.3
575
23"
48
102
67
2 5/8"
51
2 1/64"
22 X 108 7/8 X 4 ¼"
6
87
2100
MH505L
24
53
565
22 7/32 "
58
123
65
2 17/32"
59
2 5/16"
22 X 108 7/8 X 4 ¼"
6
87
2040
MH505FR
25
55
565
22 7/32 "
58
123
65
2 17/32"
59
2 5/16"
22 X 108 7/8 X 4 ¼"
6
87
2040
25.6
56.3
540
21 ¼"
55
117
68
2 11/16"
54
2 9/64"
22 X 108 7/8 X 4 ¼"
5
72
2175
www.mindrill.com
inch
Bar
Blows Per Minute
MH501L
MH625
mm
Working Pressure psi
Jackleg & Stoper Drills Jackleg Drills MINDRILL pneumatic Jackleg Drills are characterized by low spare parts consumption and minimum maintenance requirements. They are robust but simply designed with high impact energy and low air consumption. The uniform high quality of materials and manufacturing processes contribute to the long service life of the drills. Together with the Pusher Legs the Rock Drills form an attractive and cost effective drilling unit.
Features • • • • • • • • •
M610
M610 is a very popular drill for blast hole drilling in narrow vein stoping operations. Its low weight and high capability makes this drill perfectly suited to both drilling and manipulation in low stopping height condition. It is highly suitable for mechanical rock bolt. This drill has efficient lubrication system and noise reducing muffler.
Forged steel housings withstand rugged use. High penetration rate High torque Convenient operating controls located at back head Push button air leg retraction Positive lubrication and front-end-blow Sustained high penetration to the bottom of the hole Sufficient torque to install mechanical rock bolts Automatic water pressure regulation
M625
This light weight drill delivers fast penetration and strong torque. Throttle handle control is placed at the backhead of the drill with a motorcycle grip type feed control mounted on the pusherleg for smooth work. Grooved rubber grips given on spring loaded handles provide firm stability without transmission of vibration to the operator’s hand.
M610
M625
M630
This machine is designed to meet the mining industry’s need for one rock drill that is capable of both stopping and developing applications as well as shaft sinking. Its versatility also allows it to be rig mounted for dimensional stone and quarrying applications. It is smooth running with high penetration speed and low maintenance costs.
Stoper Drills M720 This stoper drill is perfect for production, raise driving and bolting in soft to medium hard rock. It has Ratchet Wheel rotation mechanism. Diameter of piston is large & makes this drill highly capable even at low air pressure.
M630 Model
M720
M720 Weight
Length retracted
Length extracted
Rock Drill Piston Bore
Air Consumtion
Stroke Length
Feed Piston Bore
Kg
lb
mm
inch
mm
inch
mm
inch
l/s
cfm
mm
inch
mm
inch
39
86
1435
56 15/32"
2205
86 25/32"
75
2 15/16"
75
159
45
1 ¾"
75
2 15/16"
www.mindrill.com
Jackleg & Stoper Drills M640
MH504W
This is the most popular jack-leg drill in the U.S.A and Mexico. Its dependability and low maintenance cost have made it the favorite of both drillers and management. It is available with a 1" or 7/8" chuck and a variety of feed legs to adapt this drill to your specific needs.
This drill has maintained its reputation of being one of the most economical and reliable rock drill for underground mines and tunnels because of its dependable design which includes Rifle Bar rotation and flushing system with double concentric tubes. This drill is used for horizontal or inclined drilling in conjunction with a pusher leg in underground mines and tunnel. For underground applications, MH504W drill is most reliable because of its low air consumption and a very high drill rate in relation to weight of the Drill.
M640
MH504W
M670
M680
All round rock drill, made to suit maximum drilling applications. It has strong Rifle Bar rotation mechanism. Long stroke and good penetration rate makes it highly efficient rock drill in medium to hard rock. Control of pusher leg is placed at the backhead of the rock drill.
High efficient rock drill for soft to hard rock. Its Ratchet Wheel rotation mechanism, short stroke and high impact rate makes it perfect for soft rock. Diameter of piston is large & makes this drill highly capable even at low air pressure. Control of pusher leg is placed at pusher leg.
M680
M670
Model
Weight
Length
Air Consumption
Piston Dia
Stroke Length
Shank Size mm
inch
Working Pressure Bar
Blows Per Minute
Kg
lb
mm
inch
l/s
cfm
mm
inch
mm
inch
MH504W
22
48.4
658
25 29/32"
48
102
65
2 17/32"
59
2 5/16"
22 x108 7/8 x 4 ¼"
6
psi 87
2040
M610
22
48.5
460
18"
55
116.5
68
2.67"
55
2.15"
22 x108 7/8 x 4 ¼"
5
72
2175
M625
44
97
600
23"
56
117
68
2.67"
55
2.15"
22 x108
7/8 x 4¼"
5
72
2175
M630
31
68.2
584
23"
88
186.5
79
3.11"
70
2.75"
22 x108 7/8 x 4 ¼"
5
72
2000
M640
32.4
72
655
27 ¼"
52
110
76
3"
64
2.5"
22 x108
7/8 x 4¼"
7
90
2200
M670
28.5
63
705
27 ¾"
69
146
70
2 ¾"
55
2 ¾"
22 x 108 7/8 x 4 ¼"
6
87
2340
M680
31
68.2
670
26 3/8"
97
206
90
3 17/32"
45
1 3/4"
22 x108 7/8 x 4 ¼"
6
87
3300
PUSHER LEGS Model
Length Retarcted
Length Extracted
Kg
lb
mm
inch
mm
inch
mm
inch
mm
inch
MMT51
15
33
1658
65"
2958
116.5”
60
2 ¼"
1300
51"
M670
MMK62S
17
37
1815
71.5"
3115
123"
53
2.5"
1300
51"
MH504W
MLF72D
19
42
1970
77.5"
3270
129"
70
2 ¾"
1300
51"
M680
www.mindrill.com
Weight
Piston Bore
Feeding Length
Suitable for Rock Drill Model
Demolition Tools
Paving Breaker
Demolition Tools Mindrill demolition tools are robust, reliable and popular for its power and durability, necessary for a variety of construction and plant maintenance applications. Typical example includes breaking reinforced concrete, heavy road works, and tarmac demolition work. Mindrill demolition hammers are the best power and performance possible in their class. All MB series breakers are available with a choice of different shank to accommodate needs from different markets and customers.
Demolition Tools Paving Breakers
Pick Hammers
Rotary Hammers
Paving Breakers MB800 MB800 Demolition Hammer is designed for the customer who looks for more traditional breaker. With their relatively low air consumption yet powerful blow, MB800 find their use in the heavy end of breaker application. MB800 breakers are hard hitting with somewhat lower impact rate.
MB803
MB800
MB803 has four-bolt back head which withstands rugged use. Its heavy duty front head springs reduce reaction back to operator and reversible piston reduces maintenance cost. It has air inlet swivel for easy maneuverability.
MB803
MB804
MB804 MB804 is designed to deliver power and durability. MB804 is used for breaking heavy & reinforced concrete. Integral oiler provides continuous lubrication and reversible piston reduces maintenance cost.
MB801 MB801 demolition tool is light weight yet robust designed for lightto-medium construction and plant related works. These tools are very popular for light deck jobs. It is 35 pound class demolition tools with improved swivel design for increased maneuverability. Lubrication grooves on the piston to increase wear properties of the impact mechanism.
MB805 MB805 offers optimum ratio between energy output and weight. This demolition tool is the most reliable in its class with no side bolts, long piston giving proper guidance and anvil block that prevents dirt from coming into the cylinder.
MB805
MB801
Model
Weight
Length
Air Consumption
Blows Per Minute
Chuck Size
Kg
lb
mm
inch
l/s
cfm
mm
inch
MB800
35
77
740
29 ¼"
35
75
32 x 160
1 ¼ x 6"
1080
MB801
20
44
540
21"
26.5
56.15
25 x 108
1 x 4¼"
1400
MB803
29.5
65
680
26 ¾"
32
68
32 x 160
1 ¼ x 6"
1300
MB804
37.5
82.5
735
29"
40
85
32 x 160
1 ¼ x 6"
1150
MB805
37
81.4
729
28 ¾"
35
74
32 x 160
1 ¼ x 6"
1200
www.mindrill.com
Demolition Tools
Pick Hammer / Rotary Hammer
Features • Alloy steel forgings - Excellent durability • Integral oiler - Continuous lubrication • Heavy duty front head springs Reduces reactive forces back to the operator • Reversible piston - Reduces maintenance cost • Air inlet swivel - For easy maneuverability • Available with/without mufflers
MP410P
Pick Hammers
MP410P is a small tool for lighter works. Ideal tool for wide variety of lighter chipping and scaling jobs. These tools are suitable for renovation and structural alteration work.
MP420P MP420P with D-type handles, are the most prolific medium-weight hammers in their class. These hammers are very reliable machines.
MP430PS MP430PS is a light & compact machine. With its long piston stroke and relatively low frequency allows you to work quickly and effectively in concrete, hard brick and other hard materials.
MP422 The most powerful pick hammer in the range, weighing 24-31 lbs. They are particularly suitable for working with realtively hard concrete in demolition, pile-capping or bridge deck applications.
MP420P
MP410P
Rotary Hammers MR314 MINDRILL make MR314 is suitable for drilling operation. It has high power-to-weight ratio. Six spline piston provides ample load-bearing surfaces for long life. Spring retainer and “D” handle is with outside trigger. Integral,large-capacity oil chamber in handles provides continuous lubrication. Teasing throttle for precise control.
MP422
MP430PS Model
Weight Kg
Length lb
mm
inch
Air Consumption l/s cfm
MR314
Shank Size
Blows Per Minute
mm
inch
MR314
6.5
14
470
19"
22
47
22 X 82.5
7/8 x 3 ¼"
MP410P
5.5
12
380
14 15/16"
9.5
20
19 x 50
¾ x 2"
2750
MP420P
9.2
20
500
19 21/32"
18.5
39
22 x 82.5
7/8 x 3 ¼"
1790
MP420PS
9.6
21
500
19 21/32"
18.5
39
22 x 82.5
7/8 x 3 ¼"
1800
MP422
11
24
565
22"
22
47
22 X 82.5
7/8 x 3 ¼"
1380
10.2
22
520
20 15/32"
17
36
22 x 82.5
7/8 x 3 ¼"
1350 1350
MP430PS
2520
MP430PSKL
10.7
23.5
500
19 21/32"
17
36
22 x 82.5
7/8 x 3 ¼"
MP440PS
10.5
23
550
21 21/32"
21.3
45
22 x 82.5
7/8 x 3 ¼"
1600
MP440PSKL
12.5
27.5
545
21 7/15"
21.3
45
22 x 82.5
7/8 x 3 ¼"
1600
www.mindrill.com
Drills with carrier
Crawler Drill
MC1030 1. Proven pneumatic drill rig with great performance 2. Trusted and lesser maintenance 3. Compact in size and easy mechanical pneumatic control system MC1030 is made for construction, quarrying and open pit mining.
TECHNICAL SPECIFICATIONS Carrier Tramming speed Traction force
3.2 km/h
2mph
17 kN
3821 lbf
Track oscilation
±20°
Ground clearance
225 mm
Hill climbing ability
8.9"
30 deg max (W/O compressor)
Steel Feed Pneumatic -driven chain feed Feed extension
750 mm
29.4"
Feed rate, max
0.3 m/s
59 ft/min
Feed force, max
21 kN
4720 lbf
Tractive pull, max
15 kN
3372 lbf
Total length
5130 mm
202"
Travel length
3565 mm
140.4"
Hydrulic oil tank
22 l
5.8 us gal
Hydrulic system, total
22 l
5.8 us gal
Traction gear
2l
0.53 us gal
7.6 l
2 us gal
Volumes
Lubrication tank (HECL)
HOLE RANGE
Capacity: DTH Drilling : 105 - 115mm (4 1/8”-4 ½”) dia hole with 5 h.p air motor piston driven rotary head of adequate torque while drilling in difficult formation.
Drifter Drilling: Pipe size
76 mm
The main components are: • Strong construction • Heavier feed chain • Fast drilling capabilities • Structural designed for extra rigidity • Versatility-option of Down-The-Hole and Top Hammer • Centralized controls with auto-feed arrangement ensure easy operation and reduction of operators fatigue. • Boom is provided with a heavy-duty lift and swing cylinders to provide rigidity while drilling. • Heavy-Duty radial piston type Air Propelling Motor with self breaking arrangement. • Pneumatic-operated hydraulic power pack for hydraulic cylinders • Air-powered traction motors with gear and chain drive • Track chain with 204 mm track shoes • De-clutching crawler drive mechanism • Air-operated chain feed for 3000mm (10ft) drill tubes • Manual drill steel support • Feed extension • Feed repining for toe hole drilling • Extra air outlet for cleaning or running air tools
Recommended hole range 3"
102-115 mm
4" - 4 1/2"
48 - 64mm (1 7/8”- 2 1/2”) dia hole with model MDS120F pneumatic drifter.
www.mindrill.com
Simba Junior
Drills with carrier
SIMBA JUNIOR Simba Junior drilling rig is a high productive long hole drilling arrangement at a low investment. This is a simple; one man operated rig, patterned to produce blast holes around 360 degrees. Hole patterns may be drilled vertically or inclined, as required. The complete Simba Junior includes M920 Drifter, complete Remote Control system, MDS10 Drill Steel Support, MDS46 Feed Beam and feed motor.
Features of Simba Junior Rock Drill •
Rotation possibility of 360 degree for easier drilling at your desired angle
•
Capable of drilling up to length of 25 mtr with hole dia of 48 to 57 mm
•
Just takes approx. 4 mins for drilling 1 mtr
•
Heavy Duty Pneumatically operated Rod Catcher
•
Feed Mechanism - Material Steel graded casting for long life & less wear and tear and less thread failing length: 1760 mm; equivalent to BMS-4 model to accommodate 1.2 meter of R 32 mm dia Drill rods.
• •
•
•
Guide Rail - Steel single piece 'F' type design with bolt & nuts Lateral movement (optional) by manual feed screw of 54 mm to travel the feed beam in either direction up to 550 mm from centre. For doing upward hole at 3 positions without shifting the complete machine. Mounting - Crad Hollow MS Pipe collapsible type mounting. Easy to assemble & dissemble in underground mines. Remote - Equipped with Remote Control
www.mindrill.com
Detail
Metric
Imperial
Diameter of hole
48-57 mm
1.88" - 2.24"
25 Mtr Max
82 ft
Hole Depth Hole direction same hole
Verticaly upward & capable of doing same hole in 360 degree direction by help of graduated ring frame M920
Comptibale drifter Air connection for drifter
38 mm
1.49"
Air connection for reverse / forward
12 mm
0.47"
Air connection for water flushing
20 mm
1/4"
Air connection for rod catcher
10 mm
0.39"
Air consumption
400 cfm
189 l/s
Air pressure
7 kg/cm2
99.4 psi
Standard
1200 kg
2646 lb
Lateral
1500 kg
3307 lb
1780 X 1550 X 2600 mm
70" X 61" X 102"
Net weight
Dimensions (LXWXH) Column bar height Closed
2200 mm
87"
Open
3700 mm
146"
1500 mm
59"
Ring Size
Drills with carrier
Wagon Drill
MW1025 Down-the-hole version Equipped with pneumatic DTH hammer ML40 the MW1025 DTH is powerful & high productivity wagon drill. There are two primary benefits: higher penetration rates & lower fuel consumption. Together with a steady & reliable pneumatic rotation unit MDS4, the wagon drill offers a wide selection of drill hole sizes from 105mm to 115mm. The MW1025 DTH is ideal for bench drilling, anchor drilling, grout hole drilling etc.
Top-hammer version
M920 Pneumatic Drifter
The Top-hammer version of versatile MW1025 TH is equipped with pneumatic rock drill M920 which is well known for its simplicity & reliability. It consumes less air & delivers all round performance and is suitable for hole size 48-76mm. Top-hammer version is the first choice for quarrying, trenching & consolidation jobs.
Essential Features • Rugged chassis • Rigid setup • Flexibility • Easy portability
GENERAL Models
MW1025 (DTH)
MW1025 (TH)
Version
DTH
Top Hammer
Weight(Aprox) Drill Bit Dia Rock Drill
Chain Feeds
MDS 35k 157
MDS 35k 257-01
1350 kg
1270 kg
105-115 mm
48-76 mm
ML40
M920
MDS 35k 859-01
Feed Length (mm)
3740
3810
3810
Total Length (mm)
5430
5430
5430
Feed Retract Force (kg)
800
800
1250
www.mindrill.com
MC590
Drills with carrier
MC590 MINDRILL MC590 drill is ideal for the use of cutters working on all type of rocks. The best balance between number of blows and rpm allows the machine a high rotation torque and high speed drilling in deep holes.
MC590
Weight
Model
MC590
Piston Diameter
Air Connection
Water Connection
Chuck Size
Air Consumption at 6 Bar
Kg
lb
mm
inch
mm
inch
mm
inch
mm
inch
l/s
cfm
35
77
90
3½"
25
1"
13
½"
22 X 108
7/8 X 4¼"
69.4
147
www.mindrill.com
Blows Per Minute
2000
Pneumatic Drifter Pneumatic Drifter M920 A popular all-round machine, M920 has earned a reputation of economy and reliability. The powerful M920 has a moderate weight and this facilities manual handling of the unit which can be mounted on simple and light rigging structures. The M920 rock drills are assembled from components in a sectional system. The complete assembly can easily be dismantled for service and inspection of internal parts. All wear parts are easy to replace. Regular inspections will hold operating cost at a minimum. The M920 is intended for operation with remote control. The rotation is reversible, a necessary feature to use with extension steel in long-hole drilling. The rotation mechanism can also be disengaged and the impact action used to rattle a tight joint of a jammed bit. M920 is a pneumatic rock drill intends for use on drill rigs in the following areas: Underground Mining
-
Long Hole Drilling
Surface Quarrying
-
Bench Drilling
Construction Grout
-
Hold Drilling
Metallurgical industry
-
Top Hole Drilling Furnaces
M920
Detail
Metric
Weight
69 Kg
Length
780mm
31"
6 bar
87 psi
Working pressure, max.
Imperial 152 lb
Impact power, max.
7.2 kW
-
Piston Dia
120mm
4.72"
Stroke Length
65mm R32, R38, T38
Adopter Type Hole Diameter Air Consumption Rotation speed
2.56" 2100 blows/min
Impact 48 - 76 mm
1 57/64" - 3"
167 I/s
354 cfm . 0 - 180 rpm
www.mindrill.com
Top Hammer Accessories
Shank Adapters The shank adapters are manufactured from specially selected alloy steels followed by heat treatment through carburizing which withstands the high impact power of drilling. This product line has been recently introduced by Mindrill and the quality is highly appreciated by the end users. Presently we maintain stock of few selected fast moving categories but we can undertake manufacturing of the same as per customer’s requirement, if
Shank Adapters
quantity permits.
Coupling Sleeves
Coupling Sleeve
Coupling Sleeves, other name is coupling, when using rock drills with male shank adapters and a conventional drifter rod, a coupling is required to join the adapter to the rod ensuring the ends touch for efficient energy transmission.
Thread size: R22, R25, R28, R32, R38, T38,T45, T51; Coupling sleeve design: full bridge coupling sleeve, semi-bridge coupling sleeve.
Top Hammer Bits Top Hammer Bit sizes are relative to both drill steel and the application being performed.
Button bit diameter : 38mm to 152mm; Button bit thread : R22, R25, R28, R32, R35, R38, T38, T45,T51, 0T60, ST58, ST68, 5R32, 5R35;
Button bit face design : flat face, dome face, drop center face; Button bits carbides style : hemi-spherical(round), Parabolic(semi-ballistic), Ballistic(conical). www.mindrill.com
Top Hammer Bits
DTH Hammer & Accessories
DTH Button Bits
DTH Hammers MINDRILL DTH hammers are designed to achieve high penetration rates with long lasting feature and low operational cost. We manufacturer DTH Hammers from hole range 3� to 8�, 75mm to 200mm. These DTH hammers are manufactured with best quality Alloy Steel, machined to high precision and heat-treated in most modern, fully process-controlled heat treatment furnace.
DTH button bit diameter: 76mm to 311mm DTH button bit shank style: More than 50 various shanks as per customer requirement including DHD3.5, DHD340, DHD350, DHD360, DHT380, COP34, COP44, COP84, SD5, 506, SD8, QL40, QL50, QL60, QL80, Mission 40, Mission 50, Mission 60, BR2, BR3, Mach33 etc. DTH button bit face design: Flat face, convex face, concave face.
DTH Button Bits
DTH Hammers
www.mindrill.com
Drilling Accessories Mindrill Air Line Accesories ensure 100% reliability and maximum output from Pneumatic Breakers and Rock Drills. Precise machining and attention to the smallest details give high performance, reliability and very low maintenance requirements. Maximum power output depends on the entire system. Poor quality Air Line Accessories may reduce the performance of Pneumatic tools drastically.
ML30 Lubricator ML30 is recommended for Pneumatic Breakers and Rock Drills. Its simple lightweight design means low pressure drop, reliable dosage and easy operation. ML30 doses the lubricant in proportion of the air flow after the oil supply is set. ML30
Mindrill Large Capacity Lubricators – 2Ltrs To 30 Ltrs Mindrill Large Lubricators are specially designed for heavy duty applications. Wide range is available from 2 ltrs to 30 ltrs. Its rugged and reliable design makes it favorite for both drillers and managers.
Hose Clamp
Mindrill Large Capacity Lubricators
Claw Coupling
Breaker Accesssories Pneumatic Moil and Chisel Points
Hydraulic Moil Points
Mindrill manufactures a wide range of high quality pneumatic breaker’s Moil and Chisel Points. Available in standard shank sizes to suit any brand of Pneumatic Paving Breakers.
MINDRILL Moil Point is tough and reliable for hard hitting hydraulic hammers. Various points, shapes and shank sizes available to suit various manufacturer’s equipment and models.
Pneumatic Moil and Chisel Point
www.mindrill.com
Hydraulic Moil Point
MINDRILL
Worldwide Presence Established in 1971, Mindrill is a leading manufacturer of various pneumatic tools for construction and mining industries. Our more than 41 years of core competences with latest manufacturing infrastructure including VMC, CNC machining and grinding with modern heat treatment facilities and product engineering department has made us one of the most popular and trusted manufacturer in domestic and international market spread over 27 countries.
|
|
Australia
Peru
|
|
Poland
Bangadesh |
Russia
|
Bolivia
|
Saudi Arabia
|
Brazil |
Canada
|
Chile
|
Denmark
South Africa
|
|
Spain
|
Srilanka
Mindrill Systems & Solutions Pvt. Ltd.
| |
Ecuador Uganda
| |
Egypt UK
|
|
Finland
Ukraine
|
|
Iran
USA
|
|
India
|
Lebanon
Zambia
|
Zimbabwe
C/0002 Š copyright 2013.xx.xx Mindrill Systems & Solutions Pvt.Ltd. This catalogue is the exclusive property of MINDRILL and cannot be copied or reproduced without written permission.
Argentina Mexico
Distributed By:
Sadananda Industrial Estate | Howrah Amta Road P.O. Baltikuri | Howrah - 711 113 Phone: Sales: Fax:
+91-33-26537610, +91-33-26538638 +91-33-65366838, +91-9830300946 +91-33-26534214
Email: marketing@mindrill.com Website: www.mindrill.com
www.mindrill.com