Furniture Portfolio | Sara Thomas by Sara Thomas

SARA THOMAS FURNITURE PORTFOLIO Professional + Personal

PROFESSIONAL

Ernst & Young Cafes Communal Table

Rounded Brass Frame with integrated linear lighting

Marble Quartz Countertop Power Outlets Blue Perforated Metal

Brass Base

OPEN CAVITY FOR POWER SOURCE AND CORD COORDINATION

1' - 0"

LINE OF COUNTERTOP ABOVE

PLUG IN FIXTURE WITH LOCAL POWER CONTROL INTEGRATED WITHIN BRASS FRAME

DEKTON FAUX MARBLE COUNTERTOP; EASED EDGE

1' - 0"

3' - 0"

BRASS BAR SET BACK FROM COUNTER EDGE. INTERNAL CAVITY FOR CORD MANAGEMENT.

- 500-600 LUMENS - 2700K - FULL DIFFUSE LENS - REMOTE DRIVER WITHIN STRUCTURE OF COUNTER - QUANTITY OF 1 - APPROX. 2" W X 2" H - FIXTURE CAN BE TALLER IF IT MEANS THE HEIGHT WILL DIFFUSE ANY DIODE IMAGING

2" 8" 2"

10' - 6"

2" 8" 2"

PERFORATED BLUE METAL

12' - 6" TYPICAL SATIN BRASS; BASE EXTRUSION TO EXTEND BEHIND MESH

FLOOR PLAN

AXON - FINSH / MATERIAL OVERVIEW

1/4"

SATIN BRASS FRAMING TO HOLD SUSPENDED LIGHT FIXTURE

LIGHT FIXTURE SUSPENDED FROM BRASS SUPPORT

1' - 10" WARDROBE HOOKS TO BE UNDERNEATH COUNTER

4' - 0"

8' - 0"

3' - 10"

1' - 10"

3' - 0"

LIGHTING FIXTURE BY LUKAS LIGHTING

BRASS PLATED POWER/USB

1' - 0"

LAPTOP HANDLE: SATIN BRASS

FRONT ELEVATION

FLOOR 9 - COMMUNAL TABLE SCALE: 1/2" = 1'-0"

2" 1' - 5"

LAPTOP HANDLE - CUSTOM BRASS FINISH

FAUX WHITE MARBLE COUNTER

3' - 0"

2' - 4 1/2"

1' - 5"

7' - 0"

2' - 4"

3 1/2"

1' - 0"

2' - 8"

SIDE ELEVATION

1' - 0"

BAG HOOK - REFER TO ELEVATION PLUG IN POWER BY JUNIPER REFER TO ELEVATION

BLUE PERFORATED METAL OVER BRASS SUPPORTS

SATIN BRASS SUPPORT BASE

SECTION

NOTES: 1. FOR DESIGN INTENT ONLY - NOT FOR CONSTRUCTION. FABRICATOR TO PROVIDE STRUCTURAL BRACING AS NEEDED. 2. SHOP DRAWINGS REQUIRED FOR GENSLER APPROVAL PRIOR TO FABRICATION. 3. SAMLPE OF CUSTOM FINISHES REQUIRED FOR GENSLER APPROVAL PRIOR TO FABRCATION.

2/18/2020 11:09:41 AM

Ernst & Young Cafes Counter

Power Outlets Marble Quartz Countertop

Brass Legs

9 1/2"

1' - 3"

STUB UP LOCATION FOR POWER TO BE LOCATED AT BACK LEG. COORDINATE DIMENSION REQUIREMENTS AS NEEDED

7' - 9"

16' - 10"

FLOOR PLAN

AXON BRASS PLATED POWER/USB

FAUX WHITE MARBLE COUNTER TOP AND BACKSPLASH

WARDROBE HOOKS TO BE UNDERNEATH COUNTER

2'-0".

3" 11"

HOOK & LAPTOP LOCK LOCATION

FAUX WHITE MARBLE COUNTERTOP AND BACKSPLASH; MITER CORNERS

3' - 0"

2" 1' - 8"

LAPTOP HOOK; SATIN BRASS

1' - 3"

1' - 0"

2' - 5"

4" 3" 4"

2'-0".

BRASS LEGS AND SUPPORTS

BRASS LEGS, VERTICAL & HORIZONTAL SUPPORTS

FRONT ELEVATION

FLOOR 9 - WINDOW COUNTER SCALE: 1/2" = 1'-0"

10" 2"

3 1/2"

SECTION

2/18/2020 11:02:57 AM

Ernst & Young Cafes Banquette

Back Cushion attached with decorative leather strap detail

Fixed Tables with metal tubing

Back Detail Tubular Metal Post

Exposed Plywood, Edges painted red

PLYWOOD BACK

2' - 11"

1' - 8"

2' - 0"

FIXED UPHOLSTERY BACK CUSHION

22' - 6"

2' - 1"

1' - 8"

1' - 10"

1' - 8"

2' - 4"

1' - 8"

2' - 1"

1' - 8"

2' - 11"

FIXED UPHOLSTERY SEAT CUSHION PAPERSTONE - SLATE FINISH WITH PLYWOOD SUBSTRATE

FLOOR PLAN

AXON

1 1/2"

BLACK POWDER COAT FASTNER

DECORATIVE LEATHER STRAP TO BE ATTACHED TO BACK CUSHION AND BACK PLYWOOD

RED POWDER COAT METAL TO MATCH BM 2003-20

5' - 3 3/4"

EQ.

1 1/2"

BLACK COVERPLY TOP W/ EXPOSED PLYWOOD EDGE

5' - 3 3/4"

1 1/2" 3" 3"

5' - 3 3/4"

1' - 8"

2' - 6"

3' - 2"

3" 4" BLACK PLATED POWER/USB

1 1/2"

10"

1' - 3"

STRIP TO HOLD POWER

1 1/2" 3"

EQ.

5 1/2" 1"

1' - 6"

RED POWDER COAT METAL TO MATCH BM 2003-20

2' - 7"

EQ.

10"

EQ.

1' - 4"

4" 1 1/2" 1 1/2"

PROVIDE PIVOT HARDWARE FOR 90 DEGREE TABLE FLEXIBILITY.

RED PAINTED FACE AND EDGE TO MATCH BM 2003-20

FRONT ELEVATION

2 LAYERS OF PLYWOOD

SIDE ELEVATION

FLOOR 13 - BANQUETTE - NOTES: 1. FOR DESIGN INTENT ONLY - NOT FOR CONSTRUCTION. FABRICATOR TO PROVIDE STRUCTURAL BRACING AS NEEDED. VERIFY ALL DIMENSIONS IN FIELD. 2. SHOP DRAWINGS REQUIRED FOR GENSLER APPROVAL PRIOR TO FABRICATION. STRAIGHT 3. SAMPLE OF CUSTOM FINISHES REQUIRED FOR GENSLER APPROVAL PRIOR TO FABRCATION. SCALE: 1/2" = 1'-0"

4. PROVIDE MOCKUP OF CUSHION CONSTRUCTION FOR SIT TEST TO BE APPROVED BY GENSLER PRIOR TO FABRICATION. 5. BACK OF BANQUETTE TO BE FINISHED PER DESIGN INTENT.

2/18/2020 11:16:35 AM

Ernst & Young Cafes Counter

Power Outlets

Exposed Plywood Countertop and Legs

Metal Foot rail and Support

1' - 6"

8 1/4" 1 1/2"

8 1/4"

METAL FOOT RAIL SUPPORT SHOWN BELOW

18' - 0"

FLOOR PLAN

AXON - FINISH & MATERIAL REFERENCE

BLACK PLATED POWER/USB

2 LAYERS OF PLYWOOD COUNTER TOP AND BACKSPLASH

PLYWOOD COUNTER TOP AND BACKSPLASH

1' - 3"

2 LAYERS OF PLYWOOD WITH EDGE EXPOSED BLACK POWDERCOAT METAL FOOT RAIL AND SUPPORT

1 1/2"

FRONT ELEVATION

FLOOR 13 - WINDOW COUNTER SCALE: 1/2" = 1'-0"

1 1/2"

5 1/4" 1 1/4"

LAPTOP LOCK HOOK

RED PAINTED PLYWOOD ON FACE ONLY TO MATCH BM 2003-20

BLACK POWDERCOAT METAL FOOT RAIL AND SUPPORT

" R7

BAG HOOKS TO BE UNDERNEATH COUNTER

3' - 0"

1' - 2"

SIDE ELEVATION

2/18/2020 11:12:02 AM

Ernst & Young Cafes Banquette

Back Cushion attached with decorative leather strap detail

Power Outlets Decorative Molding

BLACK POWDER COAT METAL SUPPORT RAIL

1/2"

1' - 10"

DECORATIVE LEATHER STRAPS ON METAL RAIL

20' - 10 3/4" FIXED UPHOLSTERED SEAT CUSHION

FLOOR PLAN DECORATIVE LEATHER STRAP WRAPPING SUPPORT METAL RAIL AND ATTACHED TO BACK CUSHION

1" 2"

4 1/2"

AXON

BLACK POWDER COAT METAL RAIL

WALL TO WALL: VERIFY IN FIELD

BACK OF PAINTED WOOD PANEL FIXED BACK CUSHION

POWDER-COATED BLACK METAL RAIL SUPPORT

5' - 2 1/4"

6' - 6 1/2"

FRONT ELEVATION

PAINTED WOOD PANEL TO MATCH BM HC-131

BLACK PLATED POWER/USB

BLACK POWDER COAT METAL BASE

PAINTED WOOD PANEL 1" TRIM TO MATCH BM HC-131

FLOOR 21 - BANQUETTE SCALE: 1/2" = 1'-0"

3 1/2"

1' - 10"

SIDE ELEVATION

FIXED UPHOLSTERED SEAT CUSHION

1' - 6"

5 1/2"

5' - 1 3/4"

3 1/2"

FIXED UPHOLSTERED BACK CUSHION

1' - 2 1/2"

5' - 1 3/4"

3' - 5"

DECORATIVE LEATHER STRAP AROUND METAL RAIL

2" 3 1/2" 1' - 11"

5' - 2 1/4"

DECORATIVE LEATHER STRAP (SEE DETAIL)

4" 10 1/2"

FIXED UPHOLSTERED BACK CUSHION

MILLWORK TRIM

PAINTED WOOD PANEL ENCLOSURE TO MATCH BM HC-131

NOTES: 1. FOR DESIGN INTENT ONLY - NOT FOR CONSTRUCTION. FABRICATOR TO PROVIDE STRUCTURAL BRACING AS NEEDED. VERIFY ALL DIMENSIONS IN FIELD. 2. SHOP DRAWINGS REQUIRED FOR GENSLER APPROVAL PRIOR TO FABRICATION. 3. SAMPLE OF CUSTOM FINISHES REQUIRED FOR GENSLER APPROVAL PRIOR TO FABRCATION. © 2019 Gensler 4. PROVIDE MOCKUP OF CUSHION CONSTRUCTION FOR SIT TEST TO BE APPROVED BY GENSLER PRIOR TO FABRICATION. 2/18/2020 11:13:43 AM 5. BACK OF BANQUETTE TO BE WOOD PANEL TO MATCH BM HC-131 W/ PANEL MOULDINGS SIMILAR TO FRONT.

The Cove Hotel Signage

AGE CONCEPT

Milky white (frosted) Lucite

Bronze metal engraved numbers, lettering & etc.

Bronze metal with waterjet cut pattern

Wall Mounted Signage - Vertical

Wall Mounted Signage - Horizontal 2.19.2020

Hyatt Morristown Retail Display Island

Quartz Waterfall Edge Countertop

Sliding Tambour Doors

Bronze Railing to hold products

Detail of sliding door, groove

Detail Joinery

Communal Table Axo Reference View

TA-404

Not to Scale

Blackened Pine

10' 10'

36"

10'

Detail Joinery Wood Reference Axo Reference View

Plan View

Not to Scale

10'

441" 941" 3" 121"

10'

8" 7"

86"

36"

42"

10"

121"

1/2” = 1’ - 0”

42"

86"

Front Elevation

Plan ViewSide Elevation

1/2” = 1’ - 0”

Wood Reference

1/2” = 1’ - 0”1/2” = 1’ - 0”

441"

10"

941"

121"

441"

Table at Site

121"

42"

Google

Communal Table Sketches Planter dividing counter height and bar height

PERSONAL

JANTE The Jante Chair embodies the bike culture in Copenhagen. Biking is seen as a quick, easy, and most environmentally friendly use of transportation amongst all social classes; this has contributed to creating an equal society since the 1920s. The chair’s form is derived from different parts of a bike. In the profile view, there are two shapes that are the same language yet are orientated differently. This represents the distinction between classes and also shows equality as the two forms come together. 21” W x 29.5” D x 27.5” H 15.5” SH