Saving Light Bulbs - The Energy Saving LED Specialists
Call us on 01420 520521 - Open 7 Days ........... PRICES INCL. VAT Free Delivery on orders over £50. NEXT DAY delivery available for orders placed before 12:00 Home :: Blog
SLB Blog
LIGHT BULB GENERAL INFORMATION, TECHNOLOGIES, UNCATEGORISED
WHY LIGHT OUTPUT SHOULD BE MEASURED IN LUMENS & NOT WATTS 4TH MAY 2018 DENNIS LEAVE A COMMENT
As light emitting diodes become the standard lighting, it is important to understand the dissimilarities between watts and lumens, as well as how to establish the right amount of lumens for achieving optimum atmosphere in a space.
Lumens vs. Watts Let’s get to understand what lumens are: The lumen is an international scienti c measurement standard for the quantity of light generated by a speci c light source or its measured brightness. On the other hand, Watts measure the required amount of energy necessary for operating a light source. The only challenge here is that there isn’t a mathematical formula to convert watts to lumens, like in converting kilograms (Kgs) to miles.
Think Lumens, and Not Watts
The advent of LED technology (which is more energy ef cient) has changed the lighting landscape. It has rendered the use of conventional bulbs meaningless. Unfortunately, this rapid change in technology has made the old-fashioned “Watt” light measurement less able to accurately indicate the bulb brightness. This does not allow for the different ef ciency in conventional types of lights (i.e. lament bulbs, halogen & uorescent) and LEDs. This is why light output should be measured in Lumens and not watts. Thus, the energy industry is now opting to use a more stable as well as widely-accurate unit to measure light intensity commonly known as Lumens.
Understanding Lumens Lumens (abbreviated as lm) is a measure of light emitted by a lamp/ bulb (but it must be visible with the naked eye). The greater the Lumens number, the brighter the light.
Understanding Watts On the other hand, watts don’t measure the brightness, rather the amount of electricity used.
Bulb Luminous Ef cacy
The effectiveness of bulbs is expressed in terms of the lumen-towatt ratio. This is the number of lumens produced for each and every watt consumed. The rate of conversion of watts to lumens by bulbs varies and is dependent on the technology used. Lighting bulbs producing more L/P (i.e. lumens-per-watt) are cheaper to run since they generate more light and use less power. LEDs possess the highest L/W ratio—what this means is that they are capable of generating a higher amount of light (from the bulb in question) for relatively little energy.
Longer-Lasting and Energy-Saving LEDs The introduction of LEDs tremendously reduced power parameter requirement for buyers. This is because you’ll be getting a bulb xture that’ll cost you 90% less as far as your electricity bills are concerned. What’s more, these bulbs are likely to last longer. Producing less heat as compared to incandescent bulbs helps LEDs to realize a 50,000 hr. lifespan. So, when shopping around for a replacement lighting bulb, think of lighting xture that’s brighter, longer-lasting, as well as more energy-ef cient—the LEDs.
Lumens vs. Candelas The two measurements can be confusing and are similar. However, they have subtle differences. Lumens are used to measure the amount of light emitted (i.e. the total visible amount of lights from a given source). This is also known as its luminous ux. On the other hand, candelas are used to measure the luminous intensity. It is also important to note that candelas are more predominant in America, while the EU prefer lumens.
LED
LEDS
LUMENS
LUMENS VS. WATTS
WATTS
PREVIOUS POST
IP Ratings Explained
LEAVE A REPLY Your email address will not be published. Required elds are marked *
Name *
Email *
Website
Comment
You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>
POST COMMENT
Search â&#x20AC;Ś
RECENT POSTS Why Light Output Should Be Measured In Lumens & Not Watts IP Ratings Explained Architectural Lighting for Buildings Buyers Guide on LED Bulbs Lighting Building Exteriors
RECENT COMMENTS saving on The 2D Compact and 2 Pin 4 Pin technical information saving on How to calculate the LUX level in a Room saving on LED Ceiling Lights: They Will Rede ne Your Living Room saving on The 2D Compact and 2 Pin 4 Pin technical information saving on How to calculate the LUX level in a Room
ARCHIVES May 2018 April 2018 March 2018 February 2018 August 2017 July 2017 June 2017 May 2017 February 2017 January 2017 December 2016 June 2016 May 2016 April 2016 March 2016 February 2016 January 2016 November 2015 September 2015 August 2015 July 2015 June 2015 March 2015 October 2014 September 2014 June 2014 April 2014 December 2012
September 2012 July 2012 April 2012 February 2012 January 2012 December 2011 October 2011 September 2011 August 2011 July 2011 May 2011 February 2011 January 2011 October 2010 September 2010 August 2010 July 2010
CATEGORIES Light Bulb General Information Lighting Design Technologies The Environment Uncategorised Uncategorized
META Log in Entries RSS
Comments RSS WordPress.org
Proudly powered by WordPress
:: Traditional Lighting
:: Eco Schools
:: The Environment
:: Lighting Design
Desktop Version Copyright © 2018 Saving Light Bulbs. Powered by Towers IT Professional Services Ltd Your IP Address is: 169.54.6.221