Installation, general

Vacuumarator positioning

For installation of a single toilet, the Vacuumaratoren should be positioned immediately behind the toilet, if possible. See next page. The pipe between the toilet and the Vacuumaratoren can however be extended to allow locating the Vacuumarator in an adjoining room, basement, outbuilding, etc. Protect from frost.

Vertical Lift, Vacuumarator

No fall (gravity feed) is necessary between toilet and Vacuumarator. The vertical lift (the max. height the pump can propel sewage) on the vacuum side for a Jets Vacuumarator is approx. 80 cm (Models 10NT and 15MB). On the pressure side (after the Vacuumarator), max. vertical lift for model 10NT is 2m. For model 15MB the max. vertical lift is 5m.

Setting running time, Vacuumarator

When the toilet is activated, the Vacuumarator starts and creates a vacuum in the pipe between toilet and Vacuumarator. In its standard confi guration, this takes 1 second. If the pipe is extended, the Vacuumarator running time has to be increased by approx. 1 second for every 2 metres of pipe length. (See chapter on adjustment of running time.)

Several toilets/grey water tanks on one system

Up to 10 toilets/grey water tanks can be connected to a single Vacuumarator. In such instances, the total pipe length will determine the setting required for the Vacuumarator running time.