CLEARSPRAY
INSTALLED ELECTRIC DISPERSANT SPRAY SYSTEM
Intelligent solutions to oil pollution problems
CLEARSPRAY Product Description The CLEARSPRAY is a range of electric dispersant spray systems with installed electric pump units for operation from Tugs, Supply Vessels and Workboats. The systems are designed for the application of diluted or concentrated dispersant from conventional Spray Arms or the new alternative to spray arms; the AFEDO™ Nozzle. CLEARSPRAY is available in three models; the CLEARSPRAY 50 which is design for small vessels operating in-shore and the CLEARSPRAY 100 which is a
CLEARSPRAY 50 pump unit
larger unit for operation for larger offshore vessels. In addition a larger capacity unit, the CLEARSPRAY 150 is available with ABS product design approval. Like all Ayles Fernie products, all CLEARSPRAY models are offered with a comprehensive range of options which means that the systems can be configured and supplied to meet specific customer requirements at competitive prices.
CLEARSPRAY 100 pump unit
Features Installed IP55 Electric Pump Units
Corrosion Resistant Materials
Neat and Dilute Dispersant Application
Comprehensive Range of Options
Bridge On/Off Control Dilute and Outlet Flow Meters for optimum control Supplied with Spray Arms or AFEDO™ Nozzles
Intelligent solutions to oil pollution problems
Technical Specification Pump Unit Motor:
Pump:
Pipework:
Baseplate:
Valves:
Std. Accessories: Spray Arms Material:
IP55, 3-Phase Motors for 50 or 60Hz power supplies
Options: 1
Dilute Spray Option (0-30%)
CS150 Centrifugal (150LPM)
3
Outlet Flow Meter
Painted Mild Steel
5
Pressure Relief Valve, Pressure Gauge
7
CS50 Roller Type Positive Displacement (70LPM)
CS100 Roller Type Positive Displacement (100LPM)
2
Gunmetal and Stainless Steel
4
8m Aluminium Spray Arms
6
WingJet Nozzles
Manual Ball Valves
Aluminium or Stainless Steel
Length:
2 No. 6m in 2 x 3m Sections
Hoses:
2 No. 5m Delivery Hoses
Support Mast:
CLEARSPRAY
2 No. in Stainless Steel with SS Gimbals
Accessories:
Nozzles, Fore/Aft Stays, SS Topping Wires, Deck and Gunwale Fittings
Documentation
2 No. Installation, Operating and Maintenance Manuals
Quality Control
Designed and Manufactured under a BS EN ISO 9001 Quality System
System Benefits •
Reliable, Cost Effective, Tried and Tested Design
•
Comprehensive Range of Options
•
Excellent Operational Performance and Flexibility
•
Good range of models
•
CLEARSPRAY 150 system design is Classification Society Approved
CLEARSPRAY
8 9
Dilute Flow Meter
Nozzle Downpipes AFEDO™ Nozzles
Motor Direct On-Line Starter with Bridge On/Off Control Panel Recommended Spares
10
Pump Spares Kit
12
UK Approved Oil Dispersant
11
13
Protective Clothing
Portable Dispersant Tanks and Suction Manifolds/Hoses
CLEARSPRAY Description of Options 1 Dilute Spray Option (0-30%) Dispersant can be applied in concentrated form ie straight from the drum or diluted with sea water. This option uses a proportioning eductor to mix dispersant at up to 30% concentration in sea water.
10 Protective Clothing We recommend that system operators (particularly when using AFEDO Nozzles) wear appropriate protective clothing. This options includes Coveralls, Goggles, Gloves and Respirator.
2 Dilute Flow Meter If the dilute option is selected, a flow meter is recommended to indicate the flow of dispersant and to set the required application rate in accordance with the Operating Manual instructions.
11 Oil Dispersant Ayles Fernie is able to supply oil dispersant chemicals in drums or 1000 Litre IBCs.
3 Outlet Flow Meter In order to set the appropriate flow rate to the spray arms, an Outlet Flow Meter is recommended. 4 8m Aluminium Spray Arms The BS100 pump unit with its higher performance can be supplied with 8m Spray Arms for larger vessel installations. 5 Nozzle Downpipes Spray Arm nozzles need to be positioned 1-2m from the water surface and Nozzle Downpipes are used to achieve this. These Downpipes are essential from most spray arm installations. 6 WingJet Nozzles The Spray Arm “Swath Width” can be extended by the use of “WingJet” Nozzles which are fitted to the outboard nozzle position. 7 AFEDO™ Nozzles The AFEDO™ Nozzle is a specially design nozzle which creates an even drop-out spray pattern and provides an effective alternative to Spray Arms with the added advantage that the nozzle can be easily stored.
9 Pump Spares Kit A pump overhaul kit is available which includes all components necessary to repair a damaged or worn pump.
For more details of other Ayles Fernie products please contact us.
Unit D5, Chaucer Business Park, Sevenoaks, Kent TN15 6YU England Tel: +44 (0) 1732 762962 Fax: +44 (0) 1732 761961 Email: sales@aylesfernie.co.uk Web: www.aylesfernie.co.uk Ayles Fernie is committed to the on-going development of its products and product details may change from time to time. This product leaflet should be used as a guide only and Ayles Fernie will be pleased to provide specific and up to date technical information as required.
2
5
7
7
July 2009
8 Recommended Spares A comprehensive range of spares is available for pump unit, spray arm and hand lance equipment.