Rotonivo
®
1
Level limit switch Series RN 3000 / 6000 Technical information / Instruction manual
Introduction
2
Applications The ROTONIVO is an electromechanical Level limit switch and is used for level monitoring of bulk goods. The units can be delivered with a wide range of Ex-approvals for use in Hazardous Areas. They can be equipped for process over- and lowpressure and also for very high or low process temperatures.
The length of the probe can be up to 4 m (158") with an extension tube or up to 10 m (394“) with an extension rope.
Selected applications: • building materials industry lime, styrofoam, moulding sand, etc. • food industry milk powder, flour, salt, etc. • plastics industry plastics granules etc. • timber industry • chemical industry • mechanical engineering
RN 3002-rope RN 6002-rope
The ROTONIVO is normally screwed into the lateral container wall so that it is in level with the filling height to be registered and monitored. The device can also be mounted from the top of the container. In this case an extension piece is used to mount the probe level with the height to be registered.
The use of a sliding sleeve for the version RN 3002/ RN 6002 is recommended so that the switch point can be changed easily during operation of the device.
3
4
5
6
RN 3001 RN 6001 with pendulum shaft
RN 3002 RN 6002
optional sliding sleeve
7
RN 3001 RN 6001
8
9
RN 3004 RN 6004
10
RN 3003 RN 6003
11
12 RN 3000 / 6000
gi011016
page 3
