ACP CNC Compact Plasma Cutting Machine

The Morgan Rushworth ACP CNC Compact Plasma cutting machines have been especially designed for simple but accurate cutting of sheet and plate material and are fitted with an operator friendly Windows based CNC controller.

Subject to initial specification, they can be either equipped with the class leading Hypertherm Powermax 105 power source utilising single gas plasma technology. Hypertherm power upgrades include the MAXPRO200 and the renowned HPR130XD providing XD Truehole technology.

The result is a high quality machine delivering low initial and operating costs, high productivity, superior cut quality and unsurpassed reliability.

Features and Benefits

Hypertherm Cutting Torch

Machine Features

• Hypertherm Powermax 105 high definition multi gas plasma source

• Windows based Hypertherm MicroEDGE Pro CNC controller

• Hypertherm Nesting Software options

• Automatic torch height control

• Torch collision protection system

• Automatic ventilation and smoke extraction system ready to be connected to a filtration system

• Positioning speed 30 m/min maximum

• Positioning accuracy +/- 0.02mm

• LMT 25 mm high accuracy linear rail

• High quality Eisele gearbox

• Mitsubishi servo motor

• Atlanta rack and pinion system

• Moveable Control Panel with gantry control joystick

Optional Equipment

• NestMaster automatic nesting software

• TurboNest nesting software and additional productivity modules

• Pronest nesting software and additional productivity modules

• Extraction/filtration system

• Automatic gas console

Technical Specifications

HDPX CNC Plasma Cutting Machine

Features and Benefits

The HDPX High Definition CNC plasma machine is the flagship model from Morgan Rushworth and is offered in a huge range of bed sizes and with many optional features. The special bridge carrier design ensures precision cutting even on extremely long bed models and allows the fitting of optional equipment such as additional plasma torches for increased productivity and single or multiple oxy torch units for cutting up to 300mm thick material.

The specifications opposite are just a selection of the potential bed sizes available for the HDPX range.

Machine Features

• Hypertherm XPR High Definition Plasma with X Definition Technology

• Hypertherm Core gas console

• Hypertherm torch height control and cutting torch

• Hypertherm Windows based EDGE Connect CNC control and ProNest software

• Virtually dross free finish typically removing the requirement for a secondary cleaning operation

• Maximised productivity and minimised operating costs

• Extremely heavy steel frame designed to withstand constant high speed production

• Bridge carrier design highly resistant to distortion suitable for multi plasma heads and oxy fuel cutting heads and allowing for precision positioning on bed lengths of up to 60 metres

• X and Y axis travel on precision linear guide rails with synchronised servo drives

• Fast positioning speed of 30 m/min with positioning accuracy to 0.05mm

• Arc voltage feedback to control optimum torch height position

• Mechanical and electronic collision avoidance system

• Marking and cutting of material performed with the same plasma torch

Optional Equipment

• Single station drilling head unit

• Three station drilling head unit

• Additional plasma systems (maximum 4 units)

• Oxy fuel cutting torches for up to 300mm Plate (maximum 8 units)

• Additional modules for ProNest software

• Tube cutting table with rotational CNC axis for cutting round or square tube

• CNC bevel cutting for flanges and arcs

• High efficiency extraction/filtration unit

SPM CNC Tube Plasma Cutting Machine

Features and Benefits

The Morgan Rushworth SPM Tube Plasma profiling system is a highly innovative machine combining the low-cost benefits of mechanised air plasma cutting with CNC automation and nesting. With the ability to profile up to 300mm diameter round tube at 12 metres long, the SPM has the capability for most common tube working requirements. Combined with the durable and recognised Hypertherm Powermax system, the SPM automates many manual processes into one seamless CNC designed and controlled cutting operation.

Machine Features

• Multi part nesting on a bar for optimized material usage

• Removes many traditional manual functions – sawing, cropping, grinding, notching, punching, drilling etc CNC accuracy; No errors or need to rework

• Tube Plasma cutting capability up to 12m length x 300mm diameter

• Hypertherm Powermax Plasma Source 45a – 105a

• Automated 4 Jaw Chuck Clamp & Feed carriage assembly from 3 to 12 metres

• Linear motion & rack & pinion movement

• Fully automated cutting process

• Centralising through-feed chuck at cutting station

• 12” Touchscreen CNC Control allowing import and storage of cut files plus design of cut parts on the control

• Fully CE protected operation cabin using Light beams

• Automatic Torch height control

• Automatic Pipe Support on infeed

• Data import by USB & network

Optional Equipment

• Marking

• Water Flush

• Support Roller – Outfeed