TECHNICAL SPECIFICATIONS

HSP 50 Hydraulic Single Station Punch

The new Morgan Rushworth HSP50 hydraulic punching machine comes with 45 tonne of punching power, a stroke length of 60mm and a 300mm throat. Capable of punching 38mm holes with the standard configuration, and optionally up to 110mm, it’s compact size makes it ideal for small workshops that need basic punching requirements.

Features and Benefits

HSP & HSPD Single & Dual Station Hydraulic Punches

Features and Benefits

The Morgan Rushworth hydraulic punching machines are available in models from 70 tonne up to 175 tonne capacity. All double punch models are equipped with a 625mm deep throat one end and a 305mm the other as standard configuration. The heavy-duty support table with adjustable backstop, universal die holder for the punching of plate, flat bar, angle iron and flange of channel and beam are all included in the standard execution.

The punching machines are also available in single-ended configuration. The standard machine allows punching of up to 57mm diameter without additional equipment. The front section of the support table can be removed in order to punch angle-iron leg down. A wide range of options are available including bar bending, sheet bending and corner notching.

Slug Collector

Machine Features

• Double punching stations

• Deep throat one end – 625mm

• Standard throat one end – 305mm (Double) / 300mm (HSP50)

• Full stroke adjustment

• Low power inching

• Punch table with multi-purpose bolster – Removable table block for overhang channel/joist flange punching

• Low maintenance

• Overload relief on hydraulic system

• Swing away punch stripper unit

• Easy change punch holder

• Punch table with guides

• Work station guard

Optional Equipment

• Large hole attachments

• Bending units

• Special tooling & accessories

Foot Pedal Controller

Technical Specifications

The Promotech portable punching machines are ideal for the punching of I beams that are too large and heavy to be processed with fixed steelworkers and punching machines. There are also considerable time savings and consumable cost savings compared to traditional magnetic drilling machines as well as the advantage of being able to punch square and slot holes.

PRO-60 / PRO-110 Portable Punches

Machine Features

• Fast clean punching of holes

• Almost noiseless operation

• Double action fully automated punching and return

• Intelligent control system with inching capability and automatic load detection

• Adjustable depth stop

• 5M hydraulic hose

• Wide range of punches and dies available in round, square and slot

Optional Equipment

• Bench top stand

• Foot pedal control

• Hoist set with adjustable height and balancer

• Beam slide with adjustable depth

PORTABLE HYDRAULIC POWER PACK WITH SHELF

BENCH TOP STAND (OPTIONAL)

(OPTIONAL) FOOT PEDAL CONTROL

WHEEL PUNCHER SLIDE (OPTIONAL)

HOIST AND TROLLEY (OPTIONAL)