SRC SA Semi-Automatic Circular Saw

Machine Features

• Heavy duty construction

• Semi-automatic cutting cycle

• Downfeed pressure regulator

• Adjustable height for cutting stroke

• High quality gearbox in oil bath

• Quick set mitring 45° left and right

• Pneumatic vice operation

• Double clamping anti-burr vice

• Self centring vice to ensure cutting is in optimum position

• 2 speed motor

• Electrical coolant pump

• Coolant reservoir in base with return filter

• Adjustable length stop bar

Optional Features

• Eccentric vice (SRE range)

• Roller track and measuring systems

Models with 275, 315 and 350mm diameter blades are offered as a fast cutting semi-automatic design, with pneumatic clamping for production cutting. The eccentric vice of the SRE allows for specific applications that would otherwise be impossible on the centred vice.

Technical Specifications

Sar 400

The Sterling SAR range of circular saws are designed for working with aluminium sections and extrusions. All models feature high blade speeds and are pull down operated. These models are offered with either manual or pneumatic clamping.

These machines use TCT toothed cutting blades which are available in a range of tooth pitches depending on the material section and required finish.

We recommend that all Aluminium saws are used with an extraction system, to reduce the risk of dust related accidents and explosions.

SAR 450SA & 550SA Upcutting Aluminium Saw

Machine Features

• Heavy duty

• Fast aluminium cutting

• Large capacity

• Mitring head 45° left and right

• Flat solid bed

• Material length stop

• Bar support roller

• Mitre left and right 0, 15, 22.5, 30 and 45 degree mitre stops

• 2 x Pneumatic vertical and horizontal clamps

• Safety cutting with full blade guard

• 1 x Roller conveyor (2m right) on pneumatic models

Optional Features

• Base – stock code 15012

• Measuring conveyor right side 3, 4, 5 or 6m

• Roller conveyor left side 3, 4, 5 or 6m

• Cooling system for cutting aluminium

• Hydro-check for cutting aluminium profiles (hydraulic speed setting)

• Auto slicing feature (90° only)

• Automatic measurement conveyor

Technical Specifications

Sar 550sa

The Sterling SAR semi-automatic range of circular saws are designed for working with aluminium sections and extrusions. All models feature high blade speeds and are semi-automatic operated with a full enclosures for ultimate safety. These machines use TCT toothed cutting blades which are available in a range of tooth pitches depending on the material section and required finish. The up-stroking 550 blade has a speed of 3000RPM and comes complete with pneumatic horizontal clamps and 2m of roller track as standard.

We recommend that all Aluminium saws are used with an extraction system, to reduce the risk of dust related accidents and explosions.

SAR 450SA & 550SA

Upcutting Aluminium Saw

Machine Features

• Fast aluminium cutting

• Adjustable blade feed rate

• Twin pneumatic vertical clamps

• Mitring head to 45° left and right

• Quick mitre location points at 0°, 15°, 22.5°, 30° and 45°

• Mitre clamp for locking off at Intermediate angles

• Easy access blade change

• Flat solid bed

• Movable back fence for larger cutting capacity

• Full enclosure with interlock safety switch

• Air gun for swarf removal

Optional Features

• Base – stock code 15012

• Measuring conveyor right side 3, 4, 5 or 6m

• Roller conveyor left side 3, 4, 5 or 6m

• Cooling system for cutting aluminium

• Hydro-check for cutting aluminium profiles (hydraulic speed setting)

• Auto slicing feature (90° only)

• Automatic measurement conveyor

Technical Specifications

PEHU LMS Measuring Sysems

The Pehu LMS10 & LMS15 are manually operated measuring systems with a digital read out indicating the current stop position. The LMS10 utilises a battery to power the DRO, whereas the LMS15 and beyond are mains powered (240v)

The Pehu LMS30 to Pehu LMS80 are powered models which can be configured as either auto-measuring or auto-feeding systems*.

An auto-feeding system can be used to ensure that material to be cut, punched or drilled is measured correctly, and fed to the cutting / drilling / punching face ready for the next operation.

The operator enters the required stop positions into the NC control and the system automatically runs through the program until it is completed. Specific systems can be configured to work with saws, drills and steelworkers or punching machines.

*The LMS30 & LMS45 requires the PEHU 112 Control to become a fully automatic feeding system.

Machine Features

• PEHU LMS10 & LMS15 – Manual positioning of stop unit

• PEHU LMS30/45/60/80 – Powered programmable positioning of stop unit

• PEHU LMS30/45/60/80 – Servo motor with rotary encoder to ensure positioning accuracy

• PEHU LMS60/80 - Fully Automatic Stop / Push-Up System

• Precision linear rail guidance system

• Digital read out of stop position

• Increased cutting accuracy by eliminating measuring errors

• Increased productivity – one set up for multiple cuts at same length

• Stop runs on precision linear guidance rail

• Rotary encoder ensures positioning accuracy

• +/- 0.1mm Repeatability

• Ideal for use with saws, drills and steelworkers

• Roller track available separately

Optional Equipment

• NC servo control and can serve as both a stop and push control for length measuring systems (LMS30 & LMS45)

• Manual or powered flip up stop to allow cutting of longer material

• Pneumatic or hydraulic gripper on the feeder unit

• Gravity or powered roller track to suit

FLIP-UP STOP FOR MATERIAL FEED-THROUGH

LINEAR RAILS

DIGITAL READ OUT OF STOP POSITION

LMS10 BATTERY OPERATED MEASURING SYSTEM

Technical Specifications

*The LMS30 & LMS45 requires a PEHU 112 Control to become a fully automatic feeding system