DIMAS SOLAR
COLLECTOR S+ SERIES
The world leading flat plate solar collector, designed for high performance in low temperature climates, mounted vertically or horizontally for both thermosifonic or pumped solar systems, certified by EN12975 1-2 European standards safety prismatic tempered glass with minimum energy transmittance of 89% high temperature resistant black silicone and double adhesive tape for perfect sealing copper tube risers perfect welded to the absorber plate integrated nut for easier mounting during the installation
blue selective absorber with high solar performance and efficiency characteristics rock wool insulation with aluminum foil for minimum heat losses
angles with internal cut for perfect sealing and fine aesthetic view, with attached male or female fittings for easier installations anodized aluminum casing and back plate for heavy corrosion resistance
TECHNICAL SPECIFICATIONS CASING: BACK INSULATION: SIDE INSULATION: ABSORBER PLATE: RISERS: COVER GLASS: SEALING:
anodized aluminum profile rockwool with aluminum foil 40mm thickness, 50kg/sq.m density rockwool of 30mm thickness, 50kg/sq.m density MIROTHERM blue selective aluminum 0.50mm thickness with absorptance 路=0.94 or SUNSELECT blue selective copper 0.20mm thickness with absorptance 路 =0.95 copper tubes 10x0.50mm or 8x0.40mm, headers 22x0.70mm safety tempered prismatic glass 4mm thickness black silicone IG type, double adhesive tape, EPDM rubber
THE S+ SERIES ARE AVAILABLE IN THE FOLLOWING DIMENSIONS: Type: Surface in sq.m: Dimensions:
S+2000 2.0m2 1000x2000x100mm
S+2500 2.50m2 1250x2000x100mm
S+2900 2.90m2 1450x2000x100mm
Potencia producida por unidad de captador (para G=1000 W/m2) Power output per collector unit (for G=1000 W/m2)
Note: due to continuous improvement of the products the manufacturer keeps all the rights to any changes of the technical specifications without any prior notice.
ISO 9001:2000
DIMAS SOLAR
THERMOSIFONIC SYSTEMS SOL+ SERIES The SOL+ Series thermosifonic systems have been designed to offer high performances in areas with low solar radiation or low temperature weather conditions, certified by EN12975 1-2 European standards
HIGH QUALITY SOLAR SYSTEM The tank ñ ñ ñ ñ ñ ñ ñ ñ
external casing of electrostatic painted aluminum internal tank with glass enameled steel 2.5mm jacketed heat exchanger of 1.5mm steel polyurethane insulation of 60mm thickness pressure relief valve, internal expansion tank magnesium rod integrated electric back up element with thermostat optional double coil heat exchanger
The collector ñ ñ ñ ñ
anodized aluminum profile heavy corrosion resistant safety prismatic tempered glass rock wool insulation with aluminum foil high temperature resistant black silicone and double adhesive tape ñ integrated nut for easier mounting during the installation
The absorber ñ blue selective absorber with high solar performance and efficiency characteristics ñ absorber’s surface available in selective aluminum or copper material ñ copper tube risers and headers ñ optional surface available in black paint aluminum or copper material
The mounting kit ñ electrostatic painted steel mounting frame ñ brass fittings ñ stainless steel tubing for the closed circuit ñ glycol antifreeze liquid ñ complete to be installed at the water network ñ for both flat or tilt roofs installations TYPES AND RECOMMENDED SIZES