A v a n z a Powerful. Aesthetic. Future oriented.
The Perfection of LED street lighting. Powerful. Aesthetic. Future oriented. Avanza.
Avanza 600
Avanza 450 Efficient LED-based street lighting can be so simple with the Avanza – beautiful and variable, efficient and sustainable. With two luminaire sizes and several reflector systems this product family provides solutions for a wide range of lighting tasks for streets or squares – either as a lateral mounted or pole-top fitting on a special designer pole or an existing standard pole. selux.com → EXT 27
P ow e r f u l Efficient High-Power LEDs combined with innovative freeform reflectors and sophisticated thermal management are the basis for the superior performance of the Avanza. LED clusters aligned to the primary light direction and Avanza reflectors coated with the purest aluminium ensure high luminous efficiency. Avanza provides light which conforms to industry standards, using maximum pole distances, while its low energy costs and positive CO2 footprint make for a convincing overall package.
2—3
A e s t h e t i c The Avanza incorporates a single-piece design and exploits the full possibilities of LED technology. Both the Avanza 450 for pathways and minor roads and the larger Avanza 600 for roadways with higher traffic volumes have a body height of just 103 mm. With its distinctive design language it lends a stylish touch to streets, squares, pathways and parks. The key feature however is its outstanding lighting quality which, of course, conforms to all industry standards – but above all – delivers harmonious brightness transitions, variable lighting power and many additional accessories.
4—5
High-quality materials and components plus a harmonious design make the Avanza a future-proof investment. This is why we are able to offer a five-year warranty on these luminaires. The housing is made of durable die-cast aluminium and the glass diffuser from non-reflecting safety glass. The LED module and electronic ballast boast a lifetime of 80,000 operating hours (L70). For each unit produced we test and document key lighting and electrical parameters to obtain zero-fault production. Even in case of LED upgrades the original luminaire appearance remains unchanged and is guaranteed.
F u t u r e o r i e n t e d
6—7
One luminaire concept for all application areas
A wide range of powers with two sizes
S
424
424
90°
90° 450
600 45°
0°
45°
0°
C0 C180 C90 C270
Lighting requirements for outdoor lighting are complex, but this does not mean that selecting suitable luminaires has to be complex too. Using two The Avanza’s lighting concept enables the widest variety of lighting tasks to be fulfilled, from a single design. Both sizes are suitable for various wattages lm/ W. There are two light colours to choose K). Only LEDs manufactured by renowned brands are used. This guarantees the quality of 250 K) that are the envy of the market. This is the Selux promise of quality for a uniform cityscape.
greater casting widths with constant street illumination which means that asymmetrical irradiation with a higher casting depth for the lowest possible number of luminaires yet with excellent light quality at the same time. The light emitted is entirely aligned to the usage area – enabling a luminaire with zero skyward scatter loss.
Optimal visibility and a pleasant light sensation
Homogenous, uniform lighting results
Method of operation of free-form reflectors
The combination of direct light and reflected light is why Avanza can deliver high light output with high visual comfort at the same time. The luminaire is equipped with two (Avanza 450) or four (Avanza 600) pairs of large freeform reflectors. An LED cluster aligned in the direction of the main light is integrated into each reflector. Selux Cross Beam Technology creates harmonious brightness transitions for optimal visibility and a unique appearance.
10 — 11
High level of system efficiency and visual comfort
Reflector with LED cluster
Reflector with additional comfort feature
Of course, requirements vary from one application to another and often go beyond those of a normed light. It is especially the case in access-only residential areas with low mounting heights where maximum visual comfort is a particular requirement. This is where the factory-installed comfort feature comes in. Attached directly onto the LED cluster luminous areas are widened, light densities are reduced and visual comfort is increased as a result.
Access-only areas and residential streets with a low traffic volume
Roads with a high volume of traffic
With 3,000 K warm white light the modules are particularly suitable for residential areas. The comfort feature enables reduction of subjective dazzling and measurable glare values.
Suitable luminous packages are available for various lighting classes. 4,500 K neutral white light offers very good recognisability and true colour reproduction.
10 m
20 m 0,1
0,2
0,5
5 0,1 0,2
0,5
1
2
5
10 1
10
2
5 10
20
0
0 1
- 5
- 20
- 15
- 10
- 5
0
5
10
15
20 m
Avanza 450 with comfort-feature Asymmetrical light distribution street with comfort feature · for residential streets with low volume of traffic according to the requirements of luminance intensity rating classes
12 — 13
8 Mounting height 4.5 to 6 m · ratio of Mounting height /pole distance up to 1 : 8
1
- 10
- 30
- 20
- 10
0
10
20
30 m
Avanza 600 Asymmetrical light distribution street · for streets with a high volume of traffic according to requirements of luminous density evaluation classes
6 Mounting heights up to 10 m · ratio of Mounting height /pole distance up to 1 : 6
Roadway/pavement combination for complex street profiles
Urban squares and parking spaces
Combined assembly of the Avanza 450 and Avanza 600 enables two lighting tasks to be fulfilled at once using a single pole: for example the lighting of roadway and pavement.
Dual arms enable uniform lighting of wide spaces from a single pole and the prevention of dark zones for added safety.
30 m
0,1 0,2 0,5
20 m 0,1
0,2
20
1
0,5
2
5 10 20
10 1
2
5 10
20
10 0
0 1
- 10
- 30
- 20
- 10
0
10
Avanza 600/450 Asymmetrical light distribution street
20
30 m
6 Combined light spot heights up to 10 m · Mounting height /pole distance ratio up to 1:6
- 30
- 20
- 10
0
10
20
30 m
Avanza 600 Asymmetrical light distribution flood · Lighting of city squares and parking spaces or for street conditions with requirements as per luminous intensity rating classes. Forwards-aligned light distribution with very high constancy for geometries of squares. Forward casting width: Light spot height × 1.5 Sideways pole distance: Light spot height × 3
14 — 15
1
- 10
3
Sustainable concept, easy maintenance
Consistent heat removal for a longer lifetime
Toolless replacement of parts
LED street lights will only really become innovative if they create long-term added value with sophisticated heat management. For only with consistent discharge of heat arising at the rear will LEDs obtain their greatest possible efficiency and a longer lifetime. Elbow lever lock
LED boards in the Avanza are fixed on specially designed contact areas in the luminaire housing. These conduct the heat onto the entire surface of the luminaire and ensure uniform cooling by circulating exterior air. As a result, the Avanza can be used in ambient temperatures of up to 55 °C (up to 71 W). In the rare case of the luminaire overheating, it will be dimmed via an NTC (Negative Temperature Coefficient) module automatically and, after cooling, reset to its initial power.
LED module
Electronic ballast
During installation, the open diffuser is secured by a tensioned spring.
Servicing and warranty Every luminaire that leaves our company is examined with regard to light colour, luminous flux and power. The data is stored to enable light components to be supplied later on that have the same technical parameters as the initial equipment. As a reliable partner to our customers, we are convinced of the high quality of our products. For this reason we offer an extended five-year warranty – including LED module and electronic ballast. You can find out more at www.selux.com/warranty.
16 — 17
The electronic ballast can be released and secured via a rotary lock (90°).
The LED module is secured with two eccentric levers on each side.
The Avanza is distinguished by highest-quality materials and utmost practicality. LED and electronic ballast are designed for 80,000 operating hours. Its long lifetime and the housing's dirt-resistant shape keep maintenance costs to the minimum. The Avanza complies with the IP66 protection category. For upgrades, the luminaire can be opened without any tools via an elbow lever lock. The LED boards are connected with the reflectors to form a simple-to-handle module. This can be replaced without any tools as can the electronic ballast. Electrical contact between LED module and converter is via a plug-in connector, which enables components to be replaced independently.
Save energy and costs with professional control
Avanza luminaires can be switched and dimmed via different interfaces (1–10 V, DALI). Due to the use of intelligent controls the light can be controlled individually and precisely according to requirements in a way that would not be possible with conventional luminaire technology. This usage-based control reduces energy consumption in the long term, lowers costs and optimizes the CO2 footprint.
Existing system
New system HIT
Avanza LED
HQL 125 W without control
HIT 70 W without control
LED 51 W without control
Energy consumption per year and saving potential (kWh/a)
LED 51 W Half-night control
LED 51 W dynamic control
17,388
- 6,678 (– 38 %)
Several control options are available on request:
10,710 - 10,962 (– 63 %) 6,426
100 %
- 12,697 (– 73 %)
- 13,646 (– 78 %)
4,691
3,742
Constant, low-power operation The luminaire is operated constantly using only the power required for the application.
80 %
6.30 pm – 6 am: 100%
60 %
6.30 pm – 6 am: 100%
6.30 pm – 6 am: 100%
40 % 20 % 0 % 7 pm
6 am
100 %
System power *
138 W
85 W
51 W
51 W
51 W
Total connection power
4.140 kW
2.550 kW
1.530 kW
1.530 kW
1.530 kW
Specific power
4.14 W/m
2.55 W/m
1.53 W/m
1.53 W/m
1.53 W/m
CO2-reduction
3,940 kg/a
6,468 kg/a
7,491 kg/a
8,051 kg/a
CO2-reduction over lifetime
78.80 t
129.35 t
149.82 t
161.03 t
Example of an inner-city road with a high volume of traffic and virtually constant luminous intensity on usage area. A road length of one kilometre with 30 luminaires was assumed as well as 4,200 operating hours annually over a lifetime of 20 years.
Phase-controlled half-night switching The light can be switched between two freelyselectable power levels by means of a control phase.
80 %
18.30 pm – 23 am: 100% 18.30 pm – 23 am: 100% 23 pm – 4 am: 30 % 21 pm – 23 am: 40 % 4 pm – 6 am: 100% 23 pm – 2 am: 20 % 2 pm – 4 am: 40 % 4 pm – 6 am: 100%
60 % 40 % Lamp luminous flux maintenance factor (LLMF)
100 %
20 %
80 % 0 % 7 pm
6 am
100 %
Dynamic, low-power operation The luminaire can be operated at low power with up to five individually programmed values.
80 % 60 %
0.9
20,000
0.88
35,000
0.8
50,000
0.76
65,000
0.7
80,000
0 % Time in h
80,000 *
Potential energy saving
Constant Lumen Technology (CLT)
40 %
Conventional street lights are often overdimensioned to ensure lighting consistently conforms to standards despite loss of luminous flux. At the beginning of life, this results in both an increased energy consumption and an increased luminance at the light output. This is no longer necessary with the Avanza. With optional Constant Lumen Technology (CLT) the loss in luminous flux can be compensated by an algorithm specially coordinated to the LEDs. The lighting level will therefore correspond precisely to the predefined requirements at all times. Contrary to the conventional technology, the luminance at the light output of Avanza is kept at a constant level. In this way potential for savings is fully exploited by means of an ideally configured lighting system.
20 % 0 % 7 pm
18 — 19
6 am
Percentages shown are examples
*) inc. electronic ballast power loss
Operating hours
Avanza system overview
Sophisticated design with manifold design options Avanza has been developed both for the needs of new systems and the upgrade of existing systems. The Avanza family of mounting arms combined with the pole that has been specially designed for the Avanza provides the luminaire with a harmonious overall look. Besides the Avanza arms, there is also a ”Basic“ range of mounting arms–both of which are compatible with either Avanza or standard poles.
8,000
6,000
Pole attachment adapter
Avanza designer brackets
Avanza attachment adapter, insertion depth: 100 mm
Avanza designer single bracket, long, insertion depth: 130 mm 600
Pole top
Selux Graphite or special finish
⌀ 60 mm ⌀ 76 mm
Avanza 600
roadway/pavement combination
SX 97-491-9
SX 97-497-9
SX 97-503-9
SX 97-509-9
SX 97-492-9
SX 97-498-9
SX 97-504-9
SX 97-510-9
SX 97-499-9
SX 97-505-9
SX 97-511-9
Basic double bracket, short, insertion depth: 130 mm
Basic double bracket, long, insertion depth: 130 mm
600
Avanza 450
103
Avanza 600
asymm. square
600
600
LED
Bestell-Nr.
LED
Bestell-Nr.
20 W · 3,000 K
SX 936 10-9
36 W · 3,000 K
SX 934 10-9
38 W · 3,000 K
SX 936 11-9
51 W · 3,000 K
SX 934 11-9
56 W · 3,000 K
SX 936 12-9
71 W · 3,000 K
SX 934 12-9
20 W · 4,500 K
SX 936 40-9
107 W · 3,000 K
SX 934 13-9
38 W · 4,500 K
SX 936 41-9
36 W · 4,500 K
SX 934 40-9
56 W · 4,500 K
SX 936 42-9
51 W · 4,500 K
SX 934 41-9
71 W · 4,500 K
SX 934 42-9
107 W · 4,500 K
SX 934 43-9
LED
Bestell-Nr.
36 W · 3,000 K
SX 935 10-9
LED
Bestell-Nr.
20 W · 3,000 K
SX 937 10-9
asymm. street
asymm. square
38 W · 3,000 K
SX 937 11-9
51 W · 3,000 K
SX 935 11-9
56 W · 3,000 K
SX 937 12-9
71 W · 3,000 K
SX 935 12-9
20 W · 4,500 K
SX 937 40-9
107 W · 3,000 K
SX 935 13-9
38 W · 4,500 K
SX 937 41-9
36 W · 4,500 K
SX 935 40-9
56 W · 4,500 K
SX 937 42-9
51 W · 4,500 K
SX 935 41-9
71 W · 4,500 K
SX 935 42-9
107 W · 4,500 K
SX 935 43-9
Standard colour: Selux Graphite or special finish · EVG: 120–277V/50–60 Hz, current: 350–1050 mA · 1–10 V, Dali (optional: fixed setting, HNS, Dynadimmer and CLT) · system efficiency up to 85 lm/ W · diecast aluminium, anti-reflex safety glass · lateral assembly: 60 mm, lateral attachment: 60/75/90 mm · permissible ambient temperature up to 55 °C · delivery with angled cable · when ordering comfort feature, add “CF” to order number Light distribution values and wattages as of November 2012. By the ongoing development and improvement LED technology changes are possible. Current values under www.selux.com selux.com → EXT 28
70
103
450 asymm. street
Selux Graphite or special finish
Basic brackets
Avanza attachment adapter Basic single bracket, long, Locking positions: 0°, 5°, 10°,15° insertion depth: 130 mm insertion depth: 100mm
double bracket
600
70
Selux Graphite or special finish
Joint attachment adapter Avanza 450
Avanza designer double bracket, long, insertion depth: 130 mm
Selux Graphite or special finish
⌀ 90 mm
1:66
Avanza designer double bracket, short, insertion depth: 130 mm
Selux Graphite or special finish
Selux Graphite Hot or special finish galvanised
Selux Graphite Hot or special finish galvanised
Selux Graphite Hot or special finish galvanised
⌀ 60 mm
SX 97-534-9
SX 97-494-9
SX 97-494-0
SX 97-500-9
SX 97-500-0
SX 97-506-9
SX 97-506-0
⌀ 76 mm
SX 97-535-9
SX 97-495-9
SX 97-495-0
SX 97-501-9
SX 97-501-0
SX 97-507-9
SX 97-507-0
SX 97-496-9
SX97-496-0
SX 97-502-9
SX 97-502-0
SX 97-508-9
SX 97-508-0
⌀ 90 mm
Basic wall bracket
70
Selux Graphite Hot or special finish galvanised ⌀ 60 mm
SX 97-512-9
SX 97-512-0
Avanza designer pole for pole top adapter Top ⌀ 76, 100 mm offset
for bracket Top ⌀ 76, 130 mm offset
100
130
3,000/800 mm
SX 198 50-9
3,030/800 mm
SX 198 51-9
4,000/800 mm
SX 198 40-9
4,030/800 mm
SX 198 41-9
4,500/800 mm
SX 198 30-9
4,530/800 mm
SX 198 31-9
6,000/1,000 mm
SX 198 20-9
6,030/1,000 mm
SX 198 21-9
8,000/1,200 mm
SX 198 10-9
8,030/1,200 mm
SX 198 11-9
tapered light pole made from hot galvanised steel · Standard colour: Selux Graphite or special finish · integrated buried base and set of anti-sink plates (300 × 300 mm) Choice of standard poles see www.selux.com
selux.com
Selux AG Motzener Straße 34, 12277 Berlin, Deutschland T +49 030 72001-0 · F +49 030 72001-100 · info@selux.de 522781 English version 2012