Getting Rid of Mold The formation and growth of mold occurs when areas of a house are exposed or are constantly prone to the conditions that foster mold growth, which conditions are often met in homes and apartments in Philadelphia due to the humid weather. These conditions include surfaces or areas of the home that are warm, often left in the dark and are usually damp. These conditions are most typically prominent in geographical areas that have a humid clement such as tropical or eastern United States, including the city of Philadelphia. However there are a few problem areas for most homes across the country no matter where they are living, which should make those homeowners and renters in Philadelphia even more cautious about mold growth in their homes. Mold growth can often be found in the bathroom, specifically the tub and shower area due to this room’s necessary use of water and frequent presence of water vapor and warm humid conditions. Along with the bathroom, other areas of homes across the country that can foster mold growth include the kitchen and the garage area of the home. But those who live in Philadelphia have to watch for mold growth in more than just these areas. While the bathroom, kitchen, and garage (if you have one) can be conducive to mold growth seemingly no matter where you live, those in Philadelphia have to keep a careful eye for mold growth in other areas of the home as well, including the bedroom, in closets, and in the living room.
Health Issues with Mold The appearance of mold in a home can lead to health issues for those who live within the home and can increase in seriousness the longer the mold goes untreated. For this reason it is important for a homeowner in Philadelphia to have the means needed to remove mold and the homeowners insurance coverage in Philadelphia to help pay for mold removal if needed. To get rid of mold, a homeowner or renter can follow a few generalized procedures that will eliminate or mitigate the mold growth problem. First, a homeowner will want to identify why the mold growth is occurring. Perhaps a plumbing issue has caused mold and mildew to form or other leaks have contributed to the mold growth. Fixing these issues should be you first step to get rid of mold.
After repairing damaged pipes or identifying other problem areas, dry the entire area completely. When mold is present on hard surfaces, scrub off the mold using common detergent and water and then dry the area thoroughly. Some areas of your home may be completely ruined by the presence of mold. An example of this would be porous or absorbent constituents that make up your home such as carpet or ceiling tiles. These materials would need to be entirely replaced in order to completely remove the mold growth in your home. If you are concerned that cleaning up a mold or mildew problem could ruin a possession or section of your home, contact and consult with a professional mold removal service and then get in contact with the provider of your homeowner’s insurance in Philadelphia.
Photo Credit: http://farm2.staticflickr.com/, http://www.lawyersandsettlements.com/