FI ND U S:
T E C H N I C A L
T E C H N I C A L S P E C I F I C AT I O N S
250
350
357
D A T A 450
457
CONTROLS: Progressive Cable Control Oil Remote Joystick Control
Standard Standard Standard Standard Standard Optional Optional Optional Optional Optional
HYDRAULICS: Standard Power Oil Capacity Independent Hydraulics ARM FEATURES: Parallel Boom Geometry Boom Type Hydraulic Slew Arm Break Back Head Float
T E C H N I C A L S P E C I F I C AT I O N S
R E Y N O L D S
H E D G E 250
350
357
450
T R I M M E R
457
FLAIL HEAD FEATURES: Twin ‘v’ Belt Head System
Standard Standard Standard Standard Standard
1.2m Head
Standard Standard Standard Standard Standard
170 litres 170 litres 170 litres 170 litres 170 litres Standard Standard Standard Standard Standard
Drive System Flow
75 I/min 75 I/min 75 I/min 75 I/min 75 I/min
Drive System Pressure
250 bar
250 bar
250 bar
250 bar
250 bar
N/A Standard Standard Standard Standard Fixed Fixed Fixed Fixed Fixed Fixed Fixed Fixed 900 900 Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard
Head Angling
257
257
257
257
2570
101mm
101mm
0
0
0
101mm
Roller Diameter
101mm
Hydraulic Roller
Optional Optional Optional Optional Optional
T E C H N I C A L S P E C I F I C AT I O N S
250
101mm
0
350
357
450
457
450 IN TRANSPORT POSITION
350 IN TRANSPORT POSITION
C D
WEIGHTS: Machine Weight inc Head & Oil 1080kg 1130kg 1160kg 1190kg 1220kg Min Tractor Weight 3250kg 3250kg 3500kg 3500kg 3500kg Min Tractor 75hp 75hp 80hp 80hp 85hp MOUNTING SYSTEM: 3pt Mounting Axle Mounting
Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional
ACCESSORIES: Road Lights
Standard Standard Standard Standard Standard
F
I
450
R E A C H D I M E N S I O N S
250
350
357
450
457
Max Reach (A) Head Horizontal
5.16mt
5.16mt
5.84mt
5.16mt
5.84mt
4.54mt
4.54mt
5.27mt
4.54mt
5.27mt
Max Height (C) Head Vertical
6.04mt
6.25mt
6.72mt
6.25mt
6.72mt
Max Height (D) Head Horizontal Max Reach (E) Head Downwards
4.52mt
4.52mt
5.28mt
4.52mt
5.28mt
3.30mt
3.30mt
4.11mt
3.30mt
4.11mt
Max Reach (F) At 450 Up
5.02mt
5.35mt
6.01mt
5.35mt
6.01mt
2.35mt
2.35mt
2.35mt
2.35mt
2.35mt
Min Siding Width (H) To Centre
1.40mt
1.40mt
1.40mt
1.40mt
1.40mt
Height (I) To Pivot
1.20mt
1.55mt
1.55mt
1.55mt
1.55mt
Max Reach (B) Head Vertical
E
H G
B A
Min Siding Width (G) To Tank
ALL DIMENSIONS ABOVE WITH 1.2MT HEAD
S H E LB O UR NE R E Y NO LD S E NG I NE E R I NG LT D . 250
SHEPHERDS GROVE, STANTON, BURY ST EDMUNDS, SUFFOLK, IP31 2AR T: 01359 250415 F: 01359 250464 SHELBOURNE.COM
SHELBOURNE.COM
200/300/400 SERIES
2 0 0 / 3 0 0 / 4 0 0 S ERI E S AT A G L A N C E
200/300/400 SERIES
200/3 00 / 4 0 0 0
S E R IES
FEATURES STANDARD FEATURES • 50hp HYDRAULICS • ALL MACHINES ARE 5m REACH • 250: FIXED FRAME, NON PARALLEL • 350 & 357: FIXED FRAME, PARALLEL GEOMETRY • 450 & 457: POWER SLEW, PARALLEL GEOMETRY • TWIN PUMP HYDRAULICS WITH 170 LITRE OIL TANK CAPACITY • STANDARD 1.2m BELT DRIVE HEAD • STANDARD DOUBLE SKINNED HEAD • STANDARD 4” BOLTED POSITION HEAD ROLLER • STANDARD CABLE CONTROLS WITH EASY FIT ARMREST CONTROL
250, 350 & 357 BREAKBACK
MODELS CAPABLE OF CONSISTENT, RELIABLE PERFORMANCE FOR FARMERS, CONTRACTORS AND COUNCILS.
other Shelbourne hedge cutters the 250, 350 and 450 are all fully assembled at the factory, run up and tested at operating temperature and delivered to the dealer ready to go to work.
• HYDRAULIC HEAD ROLLER • OIL PROPORTIONAL JOYSTICK CONTROL • ROAD LIGHTING KIT • FLOAT KITS PROPORTIONAL JOYSTICK CONTROL
The machines have been designed and built in house based upon customer feedback from our larger contractor range of machines. The 250, 350 and 450 share the same 5m reach booms and have been designed with quality and strength in mind with similar styling to their HD siblings. Weight has been saved where possible SPECIFICATION
without sacrificing strength to give a total weight including oil of 1080kg, 1130kg and 1190kg for the 250, 350 and 450 respectively. Light enough to be compatible with smaller tractors but strong enough to do a hard days work. The 357 and 457 models feature a 5.7m reach boom. The 250 features a non parallel arm and fixed side mounted frame, the 350 and 357 uses a similar fixed side mounted frame but incorporates parallel arm geometry. The 450 and 457 incorporates both parallel geometry and a power slew frame. CABLE CONTROLS
FIXED ROLLER
All machines are 3 point linkage mounted with the aid of an easy to fit stabiliser frame. As with all
OPTIONS
THE 200/300/400 SERIES MACHINES ARE SOLIDLY BUILT ENTRY LEVEL
HYDRAULIC ROLLER & DRIVE
3pt STABILIZER
200/3 00 / 4 0 0 0
S E R IES
FEATURES STANDARD FEATURES • 50hp HYDRAULICS • ALL MACHINES ARE 5m REACH • 250: FIXED FRAME, NON PARALLEL • 350 & 357: FIXED FRAME, PARALLEL GEOMETRY • 450 & 457: POWER SLEW, PARALLEL GEOMETRY • TWIN PUMP HYDRAULICS WITH 170 LITRE OIL TANK CAPACITY • STANDARD 1.2m BELT DRIVE HEAD • STANDARD DOUBLE SKINNED HEAD • STANDARD 4” BOLTED POSITION HEAD ROLLER • STANDARD CABLE CONTROLS WITH EASY FIT ARMREST CONTROL
250, 350 & 357 BREAKBACK
MODELS CAPABLE OF CONSISTENT, RELIABLE PERFORMANCE FOR FARMERS, CONTRACTORS AND COUNCILS.
other Shelbourne hedge cutters the 250, 350 and 450 are all fully assembled at the factory, run up and tested at operating temperature and delivered to the dealer ready to go to work.
• HYDRAULIC HEAD ROLLER • OIL PROPORTIONAL JOYSTICK CONTROL • ROAD LIGHTING KIT • FLOAT KITS PROPORTIONAL JOYSTICK CONTROL
The machines have been designed and built in house based upon customer feedback from our larger contractor range of machines. The 250, 350 and 450 share the same 5m reach booms and have been designed with quality and strength in mind with similar styling to their HD siblings. Weight has been saved where possible SPECIFICATION
without sacrificing strength to give a total weight including oil of 1080kg, 1130kg and 1190kg for the 250, 350 and 450 respectively. Light enough to be compatible with smaller tractors but strong enough to do a hard days work. The 357 and 457 models feature a 5.7m reach boom. The 250 features a non parallel arm and fixed side mounted frame, the 350 and 357 uses a similar fixed side mounted frame but incorporates parallel arm geometry. The 450 and 457 incorporates both parallel geometry and a power slew frame. CABLE CONTROLS
FIXED ROLLER
All machines are 3 point linkage mounted with the aid of an easy to fit stabiliser frame. As with all
OPTIONS
THE 200/300/400 SERIES MACHINES ARE SOLIDLY BUILT ENTRY LEVEL
HYDRAULIC ROLLER & DRIVE
3pt STABILIZER
200/3 00 / 4 0 0 0
S E R IES
FEATURES STANDARD FEATURES • 50hp HYDRAULICS • ALL MACHINES ARE 5m REACH • 250: FIXED FRAME, NON PARALLEL • 350 & 357: FIXED FRAME, PARALLEL GEOMETRY • 450 & 457: POWER SLEW, PARALLEL GEOMETRY • TWIN PUMP HYDRAULICS WITH 170 LITRE OIL TANK CAPACITY • STANDARD 1.2m BELT DRIVE HEAD • STANDARD DOUBLE SKINNED HEAD • STANDARD 4” BOLTED POSITION HEAD ROLLER • STANDARD CABLE CONTROLS WITH EASY FIT ARMREST CONTROL
250, 350 & 357 BREAKBACK
MODELS CAPABLE OF CONSISTENT, RELIABLE PERFORMANCE FOR FARMERS, CONTRACTORS AND COUNCILS.
other Shelbourne hedge cutters the 250, 350 and 450 are all fully assembled at the factory, run up and tested at operating temperature and delivered to the dealer ready to go to work.
• HYDRAULIC HEAD ROLLER • OIL PROPORTIONAL JOYSTICK CONTROL • ROAD LIGHTING KIT • FLOAT KITS PROPORTIONAL JOYSTICK CONTROL
The machines have been designed and built in house based upon customer feedback from our larger contractor range of machines. The 250, 350 and 450 share the same 5m reach booms and have been designed with quality and strength in mind with similar styling to their HD siblings. Weight has been saved where possible SPECIFICATION
without sacrificing strength to give a total weight including oil of 1080kg, 1130kg and 1190kg for the 250, 350 and 450 respectively. Light enough to be compatible with smaller tractors but strong enough to do a hard days work. The 357 and 457 models feature a 5.7m reach boom. The 250 features a non parallel arm and fixed side mounted frame, the 350 and 357 uses a similar fixed side mounted frame but incorporates parallel arm geometry. The 450 and 457 incorporates both parallel geometry and a power slew frame. CABLE CONTROLS
FIXED ROLLER
All machines are 3 point linkage mounted with the aid of an easy to fit stabiliser frame. As with all
OPTIONS
THE 200/300/400 SERIES MACHINES ARE SOLIDLY BUILT ENTRY LEVEL
HYDRAULIC ROLLER & DRIVE
3pt STABILIZER
FI ND U S:
T E C H N I C A L
T E C H N I C A L S P E C I F I C AT I O N S
250
350
357
D A T A 450
457
CONTROLS: Progressive Cable Control Oil Remote Joystick Control
Standard Standard Standard Standard Standard Optional Optional Optional Optional Optional
HYDRAULICS: Standard Power Oil Capacity Independent Hydraulics ARM FEATURES: Parallel Boom Geometry Boom Type Hydraulic Slew Arm Break Back Head Float
T E C H N I C A L S P E C I F I C AT I O N S
R E Y N O L D S
H E D G E 250
350
357
450
T R I M M E R
457
FLAIL HEAD FEATURES: Twin ‘v’ Belt Head System
Standard Standard Standard Standard Standard
1.2m Head
Standard Standard Standard Standard Standard
170 litres 170 litres 170 litres 170 litres 170 litres Standard Standard Standard Standard Standard
Drive System Flow
75 I/min 75 I/min 75 I/min 75 I/min 75 I/min
Drive System Pressure
250 bar
250 bar
250 bar
250 bar
250 bar
N/A Standard Standard Standard Standard Fixed Fixed Fixed Fixed Fixed Fixed Fixed Fixed 900 900 Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard
Head Angling
257
257
257
257
2570
101mm
101mm
0
0
0
101mm
Roller Diameter
101mm
Hydraulic Roller
Optional Optional Optional Optional Optional
T E C H N I C A L S P E C I F I C AT I O N S
250
101mm
0
350
357
450
457
450 IN TRANSPORT POSITION
350 IN TRANSPORT POSITION
C D
WEIGHTS: Machine Weight inc Head & Oil 1080kg 1130kg 1160kg 1190kg 1220kg Min Tractor Weight 3250kg 3250kg 3500kg 3500kg 3500kg Min Tractor 75hp 75hp 80hp 80hp 85hp MOUNTING SYSTEM: 3pt Mounting Axle Mounting
Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional
ACCESSORIES: Road Lights
Standard Standard Standard Standard Standard
F
I
450
R E A C H D I M E N S I O N S
250
350
357
450
457
Max Reach (A) Head Horizontal
5.16mt
5.16mt
5.84mt
5.16mt
5.84mt
4.54mt
4.54mt
5.27mt
4.54mt
5.27mt
Max Height (C) Head Vertical
6.04mt
6.25mt
6.72mt
6.25mt
6.72mt
Max Height (D) Head Horizontal Max Reach (E) Head Downwards
4.52mt
4.52mt
5.28mt
4.52mt
5.28mt
3.30mt
3.30mt
4.11mt
3.30mt
4.11mt
Max Reach (F) At 450 Up
5.02mt
5.35mt
6.01mt
5.35mt
6.01mt
2.35mt
2.35mt
2.35mt
2.35mt
2.35mt
Min Siding Width (H) To Centre
1.40mt
1.40mt
1.40mt
1.40mt
1.40mt
Height (I) To Pivot
1.20mt
1.55mt
1.55mt
1.55mt
1.55mt
Max Reach (B) Head Vertical
E
H G
B A
Min Siding Width (G) To Tank
ALL DIMENSIONS ABOVE WITH 1.2MT HEAD
S H E LB O UR NE R E Y NO LD S E NG I NE E R I NG LT D . 250
SHEPHERDS GROVE, STANTON, BURY ST EDMUNDS, SUFFOLK, IP31 2AR T: 01359 250415 F: 01359 250464 SHELBOURNE.COM
SHELBOURNE.COM
200/300/400 SERIES
2 0 0 / 3 0 0 / 4 0 0 S ERI E S AT A G L A N C E
200/300/400 SERIES
FI ND U S:
T E C H N I C A L
T E C H N I C A L S P E C I F I C AT I O N S
250
350
357
D A T A 450
457
CONTROLS: Progressive Cable Control Oil Remote Joystick Control
Standard Standard Standard Standard Standard Optional Optional Optional Optional Optional
HYDRAULICS: Standard Power Oil Capacity Independent Hydraulics ARM FEATURES: Parallel Boom Geometry Boom Type Hydraulic Slew Arm Break Back Head Float
T E C H N I C A L S P E C I F I C AT I O N S
R E Y N O L D S
H E D G E 250
350
357
450
T R I M M E R
457
FLAIL HEAD FEATURES: Twin ‘v’ Belt Head System
Standard Standard Standard Standard Standard
1.2m Head
Standard Standard Standard Standard Standard
170 litres 170 litres 170 litres 170 litres 170 litres Standard Standard Standard Standard Standard
Drive System Flow
75 I/min 75 I/min 75 I/min 75 I/min 75 I/min
Drive System Pressure
250 bar
250 bar
250 bar
250 bar
250 bar
N/A Standard Standard Standard Standard Fixed Fixed Fixed Fixed Fixed Fixed Fixed Fixed 900 900 Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard
Head Angling
257
257
257
257
2570
101mm
101mm
0
0
0
101mm
Roller Diameter
101mm
Hydraulic Roller
Optional Optional Optional Optional Optional
T E C H N I C A L S P E C I F I C AT I O N S
250
101mm
0
350
357
450
457
450 IN TRANSPORT POSITION
350 IN TRANSPORT POSITION
C D
WEIGHTS: Machine Weight inc Head & Oil 1080kg 1130kg 1160kg 1190kg 1220kg Min Tractor Weight 3250kg 3250kg 3500kg 3500kg 3500kg Min Tractor 75hp 75hp 80hp 80hp 85hp MOUNTING SYSTEM: 3pt Mounting Axle Mounting
Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional
ACCESSORIES: Road Lights
Standard Standard Standard Standard Standard
F
I
450
R E A C H D I M E N S I O N S
250
350
357
450
457
Max Reach (A) Head Horizontal
5.16mt
5.16mt
5.84mt
5.16mt
5.84mt
4.54mt
4.54mt
5.27mt
4.54mt
5.27mt
Max Height (C) Head Vertical
6.04mt
6.25mt
6.72mt
6.25mt
6.72mt
Max Height (D) Head Horizontal Max Reach (E) Head Downwards
4.52mt
4.52mt
5.28mt
4.52mt
5.28mt
3.30mt
3.30mt
4.11mt
3.30mt
4.11mt
Max Reach (F) At 450 Up
5.02mt
5.35mt
6.01mt
5.35mt
6.01mt
2.35mt
2.35mt
2.35mt
2.35mt
2.35mt
Min Siding Width (H) To Centre
1.40mt
1.40mt
1.40mt
1.40mt
1.40mt
Height (I) To Pivot
1.20mt
1.55mt
1.55mt
1.55mt
1.55mt
Max Reach (B) Head Vertical
E
H G
B A
Min Siding Width (G) To Tank
ALL DIMENSIONS ABOVE WITH 1.2MT HEAD
S H E LB O UR NE R E Y NO LD S E NG I NE E R I NG LT D . 250
SHEPHERDS GROVE, STANTON, BURY ST EDMUNDS, SUFFOLK, IP31 2AR T: 01359 250415 F: 01359 250464 SHELBOURNE.COM
SHELBOURNE.COM
200/300/400 SERIES
2 0 0 / 3 0 0 / 4 0 0 S ERI E S AT A G L A N C E
200/300/400 SERIES