Auger Type Application
Standard Electric Control
The simplest way of operating the Powermix’s hydraulic functions is to connect each function directly to a spool valve on the tractor. This
• Fitted with 7 blades
is easy on Popular models where only 1 or 2 functions are necessary.
on the tractor or the front of the mixer.
Electric Control with Conveyor Speed Adjustment
Electronic controls are also now available with the addition of
• Fitted with 10 blades
• Recommended on 15m and 25m machines • Fitted with 11 blades • 1670mm tall
Blades
General mixing & chopping
7
General mixing & chopping
7
Pre-Mixes only
10
Dry bale chopping
7
General mixing & chopping
10
General mixing & chopping
11
General mixing & chopping
7
General mixing & chopping
7
Pre-Mixes only
10
Dry bale chopping
7
General mixing & chopping
10
General mixing & chopping
11
conveyor speed adjustment. All Powermix Pro machines are fitted with blades as standard. Each blade can be fixed in 3 positions, they can be adjusted outwards to provide faster, more aggressive chopping or swept back more towards the auger flight for less aggressive chopping. Tungsten coated blades are also available as an option where slightly greater longevity and sharper chopping performance are required. The heavy duty planetary gearbox is mounted within a sub-frame
All blades are supported by a 12.5mm steel support plate.
which also links the load cells to the tub, this provides exceptional strength as the tub floor is not relied upon for structural purposes. The gearbox sits within a fully welded and sealed chamber within the tub base. The gearbox top bearings can be externally greased.
• Used for excellerated root and bale chopping.
Auger Type Application
Standard Electric Control
The simplest way of operating the Powermix’s hydraulic functions is to connect each function directly to a spool valve on the tractor. This
• Fitted with 7 blades
is easy on Popular models where only 1 or 2 functions are necessary.
on the tractor or the front of the mixer.
Electric Control with Conveyor Speed Adjustment
Electronic controls are also now available with the addition of
• Fitted with 10 blades
• Recommended on 15m and 25m machines • Fitted with 11 blades • 1670mm tall
Blades
General mixing & chopping
7
General mixing & chopping
7
Pre-Mixes only
10
Dry bale chopping
7
General mixing & chopping
10
General mixing & chopping
11
General mixing & chopping
7
General mixing & chopping
7
Pre-Mixes only
10
Dry bale chopping
7
General mixing & chopping
10
General mixing & chopping
11
conveyor speed adjustment. All Powermix Pro machines are fitted with blades as standard. Each blade can be fixed in 3 positions, they can be adjusted outwards to provide faster, more aggressive chopping or swept back more towards the auger flight for less aggressive chopping. Tungsten coated blades are also available as an option where slightly greater longevity and sharper chopping performance are required. The heavy duty planetary gearbox is mounted within a sub-frame
All blades are supported by a 12.5mm steel support plate.
which also links the load cells to the tub, this provides exceptional strength as the tub floor is not relied upon for structural purposes. The gearbox sits within a fully welded and sealed chamber within the tub base. The gearbox top bearings can be externally greased.
• Used for excellerated root and bale chopping.
Express Fixed Front Conveyor 9 - 11m Single Auger 425/40 B17 9 - 15m Single Auger
435/50 R19.5
788mm
425mm
928mm
361mm
928mm
446mm
16-19m Twin Auger, SA
High Discharge Option
16-19m Twin Auger, TA
435/50 R19.5
928mm
446mm
Model
425/40 B17
Axle
Tyres
Front Conveyor Height
9,11,13 & 15m
Single
305/55 R22.5 355/50 R22.5
860mm (2’ 10”)
9,11,13 & 15m
Single
385/55 R22.5
930mm (3’ 2”)
16 & 19m
Single
435/50 R19.5
870mm (2’ 11”)
16 & 19m
Single
18 R22.5
1080mm (3’ 7”)
385/55 R22.5 435/50 R19.5
970mm (3’ 3”)
16,19,22 & 25m Tandem Sprung
Standard tyre on single auger models.
All conveyor height measurements taken from the ground to the top of the conveyor web.
Mineral Chute An optional low level mineral chute is available for the
355/50 R22.5
Option on single auger and standard on twin auger tandem axle machines.
Basic Scale System:
Mid-Level Programmable Scale System:
TMR Tracker:
• Digi-Star EZ2500V
• Digi-Star EZ3400VL
• Digi-Star EZ3600V
safe and easy introduction of low volume ingredients into the tub.
Axle Risers
Axle risers and super single tyres can be fitted when a higher discharge height is required.
Express Fixed Front Conveyor 9 - 11m Single Auger 425/40 B17 9 - 15m Single Auger
435/50 R19.5
788mm
425mm
928mm
361mm
928mm
446mm
16-19m Twin Auger, SA
High Discharge Option
16-19m Twin Auger, TA
435/50 R19.5
928mm
446mm
Model
425/40 B17
Axle
Tyres
Front Conveyor Height
9,11,13 & 15m
Single
305/55 R22.5 355/50 R22.5
860mm (2’ 10”)
9,11,13 & 15m
Single
385/55 R22.5
930mm (3’ 2”)
16 & 19m
Single
435/50 R19.5
870mm (2’ 11”)
16 & 19m
Single
18 R22.5
1080mm (3’ 7”)
385/55 R22.5 435/50 R19.5
970mm (3’ 3”)
16,19,22 & 25m Tandem Sprung
Standard tyre on single auger models.
All conveyor height measurements taken from the ground to the top of the conveyor web.
Mineral Chute An optional low level mineral chute is available for the
355/50 R22.5
Option on single auger and standard on twin auger tandem axle machines.
Basic Scale System:
Mid-Level Programmable Scale System:
TMR Tracker:
• Digi-Star EZ2500V
• Digi-Star EZ3400VL
• Digi-Star EZ3600V
safe and easy introduction of low volume ingredients into the tub.
Axle Risers
Axle risers and super single tyres can be fitted when a higher discharge height is required.
Express Fixed Front Conveyor 9 - 11m Single Auger 425/40 B17 9 - 15m Single Auger
435/50 R19.5
788mm
425mm
928mm
361mm
928mm
446mm
16-19m Twin Auger, SA
High Discharge Option
16-19m Twin Auger, TA
435/50 R19.5
928mm
446mm
Model
425/40 B17
Axle
Tyres
Front Conveyor Height
9,11,13 & 15m
Single
305/55 R22.5 355/50 R22.5
860mm (2’ 10”)
9,11,13 & 15m
Single
385/55 R22.5
930mm (3’ 2”)
16 & 19m
Single
435/50 R19.5
870mm (2’ 11”)
16 & 19m
Single
18 R22.5
1080mm (3’ 7”)
385/55 R22.5 435/50 R19.5
970mm (3’ 3”)
16,19,22 & 25m Tandem Sprung
Standard tyre on single auger models.
All conveyor height measurements taken from the ground to the top of the conveyor web.
Mineral Chute An optional low level mineral chute is available for the
355/50 R22.5
Option on single auger and standard on twin auger tandem axle machines.
Basic Scale System:
Mid-Level Programmable Scale System:
TMR Tracker:
• Digi-Star EZ2500V
• Digi-Star EZ3400VL
• Digi-Star EZ3600V
safe and easy introduction of low volume ingredients into the tub.
Axle Risers
Axle risers and super single tyres can be fitted when a higher discharge height is required.
Auger Type Application
Standard Electric Control
The simplest way of operating the Powermix’s hydraulic functions is to connect each function directly to a spool valve on the tractor. This
• Fitted with 7 blades
is easy on Popular models where only 1 or 2 functions are necessary.
on the tractor or the front of the mixer.
Electric Control with Conveyor Speed Adjustment
Electronic controls are also now available with the addition of
• Fitted with 10 blades
• Recommended on 15m and 25m machines • Fitted with 11 blades • 1670mm tall
Blades
General mixing & chopping
7
General mixing & chopping
7
Pre-Mixes only
10
Dry bale chopping
7
General mixing & chopping
10
General mixing & chopping
11
General mixing & chopping
7
General mixing & chopping
7
Pre-Mixes only
10
Dry bale chopping
7
General mixing & chopping
10
General mixing & chopping
11
conveyor speed adjustment. All Powermix Pro machines are fitted with blades as standard. Each blade can be fixed in 3 positions, they can be adjusted outwards to provide faster, more aggressive chopping or swept back more towards the auger flight for less aggressive chopping. Tungsten coated blades are also available as an option where slightly greater longevity and sharper chopping performance are required. The heavy duty planetary gearbox is mounted within a sub-frame
All blades are supported by a 12.5mm steel support plate.
which also links the load cells to the tub, this provides exceptional strength as the tub floor is not relied upon for structural purposes. The gearbox sits within a fully welded and sealed chamber within the tub base. The gearbox top bearings can be externally greased.
• Used for excellerated root and bale chopping.